Search Results

Search found 11050 results on 442 pages for 'video cards'.

Page 178/442 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• Good Motherboard for 16/16/4 configurations?

  - by Burnzy

  I am looking for a board that supports 16/16/4 configurations (lga 1366 of course). For 2 graphic cards in SLI (250gts twin frozr) and a revodrive(not bought yet -20-227-578--Product"http://www.newegg.ca/Product/Product.aspx?Item=N82E16820227578&cm_re=revodrive--20-227-578--Product ). This boards seems alright for my needs (http://www.newegg.ca/Product/Product.aspx?Item=N82E16813131665&cm_re=sabertooth--13-131-665--Product), but I am afraid it's going to be too tight for both of my graphic cards. Do anyone know any other board that would do the job? Preferably asus motherboards, as they are the most stable boards I know Thanks for your help!

  Read the article

• Motherboard memory question

  - by JERiv

  I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

  Read the article

• Red and blue are swapped on Youtube

  - by Aaron Digulla

  Since Sunday (April 1st), red and blue are sometimes swapped when I watch videos on YouTube. Examples are "Peeling Apple Like A Boss" (blue arms and apple) or, to my dismay, the famous Red vs. Blue series (like this video) which sucks. Here is a screenshot of the RvB episode at 1:28. Vimeo is OK, other web video services are OK, only most YouTube videos are affected ... well, all that I could find so far. This video looks OK in Firefox but it's broken in Chrome. The episode of RvB looks wrong in both browsers. Local videos look file. What could be causing this?

  Read the article

• How to troubleshoot memory card read?

  - by shinjin

  The built in memory card reader in my laptop mounts SD cards as read-only only. This happens both in Windows 7 and Ubuntu. Most of the time. Ever now an then it works. After a some non-deterministic combination of uninstalling/reinstalling/disabling/enabling of the driver with the mandatory reboots the card reader works for a while. Is there any sane way to troubleshoot if it's an actual hardware problem, or just a matter of drivers? I've tested it with several SD cards, that work just fine in other devices. System: Acer Aspire 8951G, Windows 7-64bit

  Read the article

• Batch Convert .mkv to .mp4 with VLC

  - by IamHere

  i want to batch convert all .mkv file in a folder into .mp4 with vlc. it should use the original video-/audio-stream and if possible the .ass subtitle of the .mkv. so its not really a convert, its more changing the container. (my player cant read the mkv) if i do this conversion by hand (manually) it works, but i have a lot of mkv to convert, so it would take a lot of time. i have searched the internet for a batch file to do this and i found a few and tried to modify them to my wish, but all attempts i tried just created a .mp4 file that doesn't contain the audio-stream and the video-stream also cannot be rendered by all my mediaplayers on the pc. so i would be very thankful, if you could tell me how the batch have to look like, so it works with original video-/audio-stream (maybe .ass subtitle)

  Read the article

• How to identify RAID (5 or 6) controllers that allow dynamic resize of the array

  - by David Pfeffer

  I'm building a server with a RAID5 array, based on a hardware controller. I want to be able to later add additional disks and have the array rebalance across all of the disks, enlarging the usable size. I also want to be able to later upgrade to bigger disks (one at a time, of course) and then expand the array to fill the entire drive. These features are available in Linux software raid (md). I've also heard they're available in some hardware controllers. Currently, I own the Adaptec RAID 3805 card and the 3ware 9650se card. I'd prefer to use the Adaptec if possible, but I can't find if either of these cards offer this feature. If they don't, are there other affordable (read as: sub-$600) RAID cards available that can accomplish this?

  Read the article

• Which linux x86 hardware keystore?

  - by byeo

  I'm terminating SSL/TLS in my DMZ and I have to assume that machine will be hacked. At which point my certificates are compromised. Previously I've used nCipher hardware keystore/accelerator to solve this issue. These cards won't reveal the private key even to root. The card performs the encryption and decryption onboard and is hardened against physical attack. The only way to get at the keys is by attaching a smart card reader to the card itself. I'm having trouble finding information about something to recreate this approach. Is this the domain of specialist switches and firewalls these days? This old page references some of the old hardware: http://www.kegel.com/ssl/hw.html#cards

  Read the article

• Are there HP Infinihost III ex drivers for windows available?

  - by Matt

  I picked up some infiniband cards off ebay for development/testing purposes. I was hoping that there would be some drivers available under windows 7, but it doesn't seem to be recognised by the OFED software which would seem to contain windows drivers. They are however immediately picked up by Ubuntu and drivers are loaded. Are these cards supported under windows 7 at all? mstflint under linux reports: Image type: Failsafe FW Version: 4.8.930 I.S. Version: 1 Device ID: 25208 Chip Revision: A0 Description: Node Port1 Port2 Sys image GUIDs: 001a4bffff0c9374 001a4bffff0c9375 001a4bffff0c9376 001a4bffff0c9377 Board ID: (HP_0060000001) VSD: PSID: HP_0060000001 From what I can tell they are the following: HP IB 4X DDR PCI-e DUAL PORT HCA (HP part number 409376-B21)

  Read the article

• Lync client configured as room

  - by captainmish

  We have a few usb cameras in meeting rooms that people can plug their laptops into, which works ok, but we're looking for better... Probably a long shot, but does anyone know of a way to have something like a "common area" client, where a PC connected to a webcam and speakers/mic can become a bookable resource, dragged in to conversations and automatically show video? A workflow I imagine: User books a room with "special" lync client as attendee Meeting time comes, they go to the room and fire up lync on their pc "special" lync client automatically (or is dragged in) joins and starts video, local attendees use audio and video from the special client Any tips welcome!

  Read the article

• How can I convert and repair MPEG-TS (DVB-S captures) for better playback?

  - by SofaKng

  I have a lot of MPEG-TS video files (H.264 video with AC3 or MP3 in a .TS container) captured from a DVB-S capture card. When I play these videos it's much slower to seek in the video (ie. skip 30 seconds, etc) than with other files. I'm not sure if the problem is the H.264 encoding (reference frame count?) or the MPEG-TS container, or if the MPEG-TS file contains sync errors, etc. Does anybody have a good workflow for converting and repairing these files?

  Read the article

• Set Final Cut Express Sequence Options 4:3 to 960p (30fps)

  - by Maccaius

  Hi I have an project in FCE which was recorded in MPEG-4 video in 1280 x 960 (1,4MB/s) and whenever I import those mov files to FCE thez show just fine. but when i add the clips to the timeline (sequence) the quality is cropped - instead of HD i can onlz export the timeline with quicktime conversion and a resolution of 720 x 480. can anybody help me out and tell me how i can export the timeline in full HD quality (as the raw material itself is)? tried the quick setup and exporting as divx and AIC which doesnt reallz work. the actual video size is HD, but qualitz of the video is like SD...

  Read the article

• Remove DRM From a WMV file I own

  - by Rev

  Alright, first, let me explain. I purchased some content through Microsoft's Zune/Xbox Video service, and man that was a mistake. After trying several times to get the video to play, I received an error along the lines of "out of licenses." Lucky for me, I was able to recover the file I was looking for off of a backup, but now I'm having problems playing it. It works fine in Windows Media Player, but not in Zune or Xbox Video (on Windows 8). I contacted Zune's customer support, and of course they couldn't help me. So, I legally own the content, I just want to be able to play it where I want to play it. It's ridiculous that I can't. I know there are ways to do this out there, I just can't figure it out (I keep getting directed to this piece of junk thing called Almedia, which kind of seems to work, but was only putting out audio in the demo version). Thanks!

  Read the article

• Are there any 17-20 inch monitors that support displayport?

  - by WildJoe

  I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

  Read the article

• How to tell if my sound card is listed in Device Manager?

  - by Bruhan

  The sound on my computer suddenly stopped working. When I check Sounds and Audio Devices in the Control Panel, I get "No Audio Device" with everything grayed out. When I check the Device Manager under "Sound, video and game controllers" I see the following list: Audio Codecs Legacy Audio Drivers Legacy Video Capture Devices Media Control Devices MPU-401 Compatible MIDI Device Standard Game Port Video Codecs None of these looks like my sound card. Of course, my sound "card" is not really a sound card, it's integrated with the nVidia-nForce motherboard. I'm running Windows XP. So is one of the above my sound device, or is the OS not detecting it? If the latter, how do I get it to detect it?

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• Disable Control-L hotkey on YouTube

  - by Heptite

  I am used to using Ctrll to access my address bar. Unfortunately YouTube "helpfully" defines Ctrll as a hotkey to jump forward several seconds in the currently playing video, so I need a way to stop YouTube from adding that key binding. A Greasemonkey/Scriptish userscript that disables the binding after page load would be acceptable. To be clear, this is while I am on a YouTube video's page, not on a third-party site that has embedded a YouTube video, and the behavior occurs when the Flash player does not have focus. Note: I am aware that Altd does the same as Ctrll in Firefox, but I'm too used to Ctrll and I'd rather not be forced to switch. Edit: OS-specific solutions are less desirable since I use multiple OSes; in-browser solutions are preferred.

  Read the article

• PNY ExpressCard SATA II 2-port card - drivers?

  - by stewartwb

  I bought a couple of PNY eSATA cards for notebook computers, model P-NSA2-EC-RF. I mistakenly thought that they would be a bit more plug-and-play, like cards that supply USB or Firewire ports. They did not ship with the Driver CD, and the drivers I found on the PNY web site didn't work. I've emailed their support group, but we all know how likely it is that they will respond before the end of the decade. Does anyone have a driver disc handy for this model card, or know where I might download a driver ISO? (Dell XPS M1330 laptop running Windows 7 x64 and sometimes Windows 7 x86)

  Read the article

• Network tries to reindentify itself now and then

  - by Don Young

  When the computer starts up it connects itself to the router (ZTE 4G router) automatically, but after I have surfed the web for a while, it tries to identify itself, meaning you get that little blue circle next to the little screen at the corner. When browsing it does not cause any problems, but if I'm streaming a video the video will then stop, I'll have to refresh the page to make the video start again. And if I'm playing a game, LoL for example, the game will freeze for about 2 seconds then continue again (due to lost connection to the internet). I have no virus on my computer, although I had before. I have reset my router, restarted my computer, updated my ethernet driver, checked so that the IPv4 is set on automatic and tried different router channels. I have had this router for a few months and the problem just started recently. Here is the ipconfig screen:

  Read the article

• How to make my display Grayscale?

  - by Oldarney

  I want to reduce the saturation of my laptop monitor to the point that it is almost grayscale. That's the goal. Intel and Asus don't have an answer. Asus Splendid and the intel graphics control panel can increase the saturation, but not lower it. I would prefer a software solution, although I DIY'ed a vga grayscale adapter for my desktop. I have an Asus UL30A with an Intel GMA 4500MHD. I know that the latest ATI cards, windotosh's and high end nvidia cards all support control panel desaturation. Why? black and white makes me 3 times more productive.

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Can I use my old Sony Handycam TRV815 as a web cam?

  - by Optimal Solutions

  Has anyone ever used their old Sony Handycam (or maybe any older hand-held camcorder) as a web cam? As in streaming the live video from the cam to a web server (local or remote/Internet). My TRV815 has a pretty darn good picture quality for its time.. Via USB or Ethernet. It has S-Video but I think that is input. It has RCA out (white/red for audio and yellow for video) and I have used that to display to my TV. I have web cams already but was wondering if I could put this one to use also just for kicks..

  Read the article

• Two NICs, one server.

  - by kobrien

  I have two NICs on a fresh install of Ubuntu 10.04 LTS. Both are config'd be dhcp. Both cards are on the same lan with same gateway. everything about the cards is the same except the IPs they get, which is what I want. What I'm trying to achieve is having both NICs operational at the same time. Currently when the server boots, it activates both NICs, but the server can't resolve any domains. If I ifdown one of them and bring it back up, the server is able to resolve domains, but the NIC I bring up won't respond to any traffic. Any ideas?

  Read the article

• Minimal Lync 2013 Setup

  - by vkapadia

  I would like to install a Lync 2013 server at home. What would be the minimum requirements for it? I've seen the requirements and they seem pretty hefty, just want to know what I need for a basic set up. This will be for up to 5 users. I would like users to be able to connect from outside the network as well. From what I've been able to find, it looks like I'll need 3 servers. A domain controller, a lync front end server, and an edge server (for external connectivity, and it will need 2 network cards). Is that really all necessary? And how would they need to be connected (I've never connected a machine with multiple network cards)? Do they all have to be separate machines, or can I use VMs?

  Read the article

• ffmpeg fully html 5 converion supported

  - by user58542

  I need to know about library that required for ffmpeg for convert any format of audio and video for supported following format to have best configuration to convert audio and video files for html5 formats. I need for support mp3 and ogg for audio files. Also need for support FLV, H.264, Ogg Theora and VP8 (WebM) for video files. I'm using debian also using deb-multimedia repository. I need list of packages required for this formats(any format to this formats). also any configuration for install from package management or compile via latest ffmpeg repository. Thanks a lot.

  Read the article

• A GFX card with two DVI and one HDMI with audio?

  - by TomaszRykala

  I haven't upgraded my PC for a while nor kept up to date with pc hardware since 2007, but have recently come up with a requirement and I am wondering if I can solve it! Are there any graphics cards out there that have two DVIs and one HDMI output, with the HDMI supporting sound over it? Basically, I've got a two PC monitor setup, and both monitors are connected to the two DVI's of my GTX9800+. I want to upgrade my card to say, GTX 460, but can't find if there is such with two DVIs (for my monitors) and one HDMI with audio (for my TV). So I am wondering, if such solution possible at all? I noticed that there are some cards out there with two DVI's and one mini-HDMI, but they all say 'HDMI Output Yes x 1 (via DVI to HDMI adaptor x 1 )', which probably means that because of the DVI element, the audio won't work. Is this true? Such card is an exmaple: http://uk.asus.com/Graphics_Cards/NVIDIA_Series/ENGTX460_DirectCU2DI1GD5/#specifications Many thanks for your help!

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >