Search Results

Search found 38274 results on 1531 pages for 'getting started'.

Page 179/1531 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• iptables firewall to protect against automated entries

  - by Kenyana

  I am getting unusually large calls on my app. I have implemented CSRF Check over ajax and its working but am still getting so many calls. My guess is that someone has a script that is 'logged' in and making all these calls. Could someone please share a good iptables script for blocking ip's that run 10 calls to /controler/action in a second. I am using `/sbin/iptables -A INPUT -p tcp --syn --dport $port -m connlimit --connlimit-above N -j REJECT --reject-with tcp-reset save the changes see iptables-save man page, the following is redhat and friends specific command service iptables save` That is from cyberciti

  Read the article

• ssh client times out to some servers, works on others

  - by mmdanziger

  I have a strange problem and I'm not sure where to begin. My ssh client works on some servers but times out on others. Obviously, I checked that the servers are accessible via ssh from other locations. From my machine A I can log on to C only by logging on to B first. There are at least two servers for which this is the case. To make matters more strange sudo ufw status - Status: inactive nmap -sT -p 22 <problem_server> - ...22/tcp open ssh... On one affected server I am getting: ssh_exchange_identification: Connection closed by remote host and on the other I am getting ssh: connect to host <problem_server> port 22: Connection timed out With both of these servers I can log in from other machines. How can I troubleshoot such a problem?

  Read the article

• Want to make RTS strategy game, good starting point...?

  - by NOLANDI

  everybody! I find this community because I did research about game developing topics. So I decide to register on this community and ask for your opinion. I am not begineer in computer stuffs, and I know logic of programming language. I have little knowlegde of C, C++, Started to learn C#...but I was always oriented about other areas of IT. Amateur for game making but not in IT general! I am interested to make RTS strategy video game, isometric camera view (like PC GAME COMMANDOS for example)...so I started to read many books about DirectX, XNA, OpenGL, C#, AI programming...so I want to know where is good starting point for making this game genre. I want to use C# for this project, not C++, since I always had trouble with it, because it is too complicated. I see good oportunity for learning C#, since it has more object-oriented concept, with much less code and easy readible code for writing. Beside of that I know that C++ is the more powerful language until today. So I want to use DirectX and C# for my project. But it will required more time for sure, to learn it. I have trouble with finding books for c# & DirectX (I found just one), but in every next book, it is programming in c++! I read many web sites and they mentioned Slim DX, and in generaly, other articles which I read tells that it is possible to make good game with combination c# and directX, but...I don't have enough information about all this stuffs, so I became confused! It is really hard to have wish to learn c++ from scratch, since I started c# and I like it really...I don't try OpenGL, but I am already familiar with DirectX (some beginning stuffs), and I think that it is good and interesting. So, I decide to choose between maybe Unity3d and XNA first. XNA...hm, it sound that it is not bad solution, but I heard that it is already overcome technology, and I think that it is better to wait with XNA, until I try to make something with DirectX and C#, at first. But I dont know it is possible to make strategy game in XNA?! Maybe I am wrong. I also, find Unity 3D game engine and I find that I could programming there in C#, but many all examples are written in Javascript (Digital tutors videos)...But I generaly have wish to learn it too, because it allows to export games to mobile phones, there a lot of documentations, it is free, etc... I want to find best way to learn C# and DirectX, and make this game, but I dont know if it's possible to combine?! But maybe is good to first try Unity and XNA, because I am beginner?! Thank you all! I am willing to hear your expirience.

  Read the article

• Wireless mouse temporarily freezes when resume from standby

  - by R Pennese

  I have been getting a very annoying problem since recently in Ubuntu 12.04, probably due to another update that did more bad than good... When I resume from sleep on my Lenovo Thinkpad T420, my wireless laser mouse (Logitech M705) freezes at regular intervals (15.20 seconds) for 5 seconds then works again. This happens regardless if the computer is on battery or on AC power. How do I debug this? I am getting tired of the fact that my system gets more and more unstable over time while it should be the opposite...

  Read the article

• What personal milestones can you use to measure growth in your programming abilities?

  - by GWLlosa

  How can you determine objectively, over time, that you are getting any better at producing code? For example, I may sit here and feel that "I know now, and I use now, so I must be better." But this does not account for my own bias, or the fact that I may be getting better at a slower rate than intended, or I may actually suck at and not realize it. What methods are available for one to objectively rate one's own abilities? What about to objectively compare them to their peer groups?

  Read the article

• How does one get Bluetile on 12.04?

  - by JKN

  I've been working on getting bluetile working on 12.04 so I can start down the path of tiling windows managers, but I have been having limited success. I have read the (only 7!) other posts on bluetile and tried the website, but unfortunately nothing seems to address precise thoroughly enough for me to get it working. I have tried getting gnome running on my machine via apt-get and following basic instructions from there, but without success. The apt-get for bluetile also fails (on selecting the gnome-bluetile session option, unity ends up opening anyway in a buggy, unstable way). I also messed around with specifying a custom xsession for lightdm to look at and setting the window-manager to bluetile, but again without success- somehow I ended up in unity again. Apologies if this question is too vague- I am new to really using linux systems, so sometimes I don't know what to ask or look for. Thanks!

  Read the article

• Determine Windows Version and Edition

  Learn about a comprehensive method of getting the Windows version and differentiate among the various editions.

  Read the article

• How to Get a Free Backlink Very Easily

  Getting Backlink is really essential to get page rank. Backlink is also known as incoming link.

  Read the article

• Visual Studio 2010 Videos Refresh

  The DevExpress Channels video content is getting an IDE makeover. New videos and screencasts will use the Visual Studio 2010 IDE with DXperience v2010.x release. Some of the popular older videos are also getting re-recorded to show off new and changed product features. For example, this week youll see old (and some new) videos about the versatile and multi-platform reporting suite: XtraReports. In case you didn't know, from DXperience v2010.1 onwards, XtraReports works on these platforms:...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• aspect parameter validation [closed]

  - by user12558

  Hi, Im doing a POC using Aspectj. class BaseInfo{..} class UserInfo extends BaseInfo{..} class UserService { public void getUser(UserInfo userInfo){..} public void deleteUser(String userId){..} } I've defined an advice, that gets invoked when I pass an UserInfo instance.But when i try to pass the BaseInfo, the advice is not getting invoked. Below block executes the afterMethod as expected for getUser. &ltaop:pointcut id="aopafterMethod" expression="execution(* UserService.*(..,UserInfo,..))" / &gtaop:after pointcut-ref="aopafterMethod" method="afterMethod" / But when i try to give BaseInfo instead of UserInfo, the aspect is not getting triggered. Am i missing something? Kindly help me on this issue.

  Read the article

• Perl Scripts Seem to be Caching?

  - by Ben Liyanage

  I'm running a perl script via mod_perl with Apache. I am trying to parse parameters in a restful fashion (aka GET www.domain.com/rest.pl/Object/ID). If I specify the ID like this: GET www.domain.com/rest.pl/Object/1234 I will get object 1234 back as a result as expected. However, if I specify an incorrect hacked url like this GET www.domain.com/rest.pl/Object/123 I will also get back object 1234. I am pretty sure that the issue in this question is happening so I packaged up my method and invoked it from my core script out of the package. Even after that I am still seeing the threads returning seemingly cached data. One of the recommendations in the aforementioned article is to replace my with our. My impression from reading up on our vs my was that our is global and my is local. My assumption is the the local variable gets reinitialized each time. That said, like in my code example below I am resetting the variables each time with new values. Apache Perl Configuration is set up like this: PerlModule ModPerl::Registry <Directory /var/www/html/perl/> SetHandler perl-script PerlHandler ModPerl::Registry Options +ExecCGI </Directory> Here is the perl script getting invoked directly: #!/usr/bin/perl -w use strict; use warnings; use Rest; Rest::init(); Here is my package Rest. This file contains various functions for handling the rest requests. #!/usr/bin/perl -w package Rest; use strict; # Other useful packages declared here. our @EXPORT = qw( init ); our $q = CGI->new; sub GET($$) { my ($path, $code) = @_; return unless $q->request_method eq 'GET' or $q->request_method eq 'HEAD'; return unless $q->path_info =~ $path; $code->(); exit; } sub init() { eval { GET qr{^/ZonesByCustomer/(.+)$} => sub { Rest::Zone->ZonesByCustomer($1); } } } # packages must return 1 1; As a side note, I don't completely understand how this eval statement works, or what string is getting parsed by the qr command. This script was largely taken from this example for setting up a rest based web service with perl. I suspect it is getting pulled from that magical $_ variable, but I'm not sure if it is, or what it is getting populated with (clearly the query string or url, but it only seems to be part of it?). Here is my package Rest::Zone, which will contain the meat of the functional actions. I'm leaving out the specifics of how I'm manipulating the data because it is working and leaving this as an abstract stub. #!/usr/bin/perl -w package Rest::Zone; sub ZonesByCustomer($) { my ($className, $ObjectID) = @_; my $q = CGI->new; print $q->header(-status=>200, -type=>'text/xml',expires => 'now', -Cache_control => 'no-cache', -Pragma => 'no-cache'); my $objectXML = "<xml><object>" . $ObjectID . "</object></xml>"; print $objectXML; } # packages must return 1 1; What is going on here? Why do I keep getting stale or cached values?

  Read the article

• Why do I get a segmentation fault while redirecting sys.stdout to Tkinter.Text widget in Python?

  - by Brent Nash

  I'm in the process of building a GUI-based application with Python/Tkinter that builds on top of the existing Python bdb module. In this application, I want to silence all stdout/stderr from the console and redirect it to my GUI. To accomplish this purpose, I've written a specialized Tkinter.Text object (code at the end of the post). The basic idea is that when something is written to sys.stdout, it shows up as a line in the "Text" with the color black. If something is written to sys.stderr, it shows up as a line in the "Text" with the color red. As soon as something is written, the Text always scrolls down to view the most recent line. I'm using Python 2.6.1 at the moment. On Mac OS X 10.5, this seems to work great. I have had zero problems with it. On RedHat Enterprise Linux 5, however, I pretty reliably get a segmentation fault during the run of a script. The segmentation fault doesn't always occur in the same place, but it pretty much always occurs. If I comment out the sys.stdout= and sys.stderr= lines from my code, the segmentation faults seem to go away. I'm sure there are other ways around this that I will probably have to resort to, but can anyone see anything I'm doing blatantly wrong here that could be causing these segmentation faults? It's driving me nuts. Thanks! PS - I realize redirecting sys.stderr to the GUI might not be a great idea, but I still get segmentation faults even when I only redirect sys.stdout and not sys.stderr. I also realize that I'm allowing the Text to grow indefinitely at the moment. class ConsoleText(tk.Text): '''A Tkinter Text widget that provides a scrolling display of console stderr and stdout.''' class IORedirector(object): '''A general class for redirecting I/O to this Text widget.''' def __init__(self,text_area): self.text_area = text_area class StdoutRedirector(IORedirector): '''A class for redirecting stdout to this Text widget.''' def write(self,str): self.text_area.write(str,False) class StderrRedirector(IORedirector): '''A class for redirecting stderr to this Text widget.''' def write(self,str): self.text_area.write(str,True) def __init__(self, master=None, cnf={}, **kw): '''See the __init__ for Tkinter.Text for most of this stuff.''' tk.Text.__init__(self, master, cnf, **kw) self.started = False self.write_lock = threading.Lock() self.tag_configure('STDOUT',background='white',foreground='black') self.tag_configure('STDERR',background='white',foreground='red') self.config(state=tk.DISABLED) def start(self): if self.started: return self.started = True self.original_stdout = sys.stdout self.original_stderr = sys.stderr stdout_redirector = ConsoleText.StdoutRedirector(self) stderr_redirector = ConsoleText.StderrRedirector(self) sys.stdout = stdout_redirector sys.stderr = stderr_redirector def stop(self): if not self.started: return self.started = False sys.stdout = self.original_stdout sys.stderr = self.original_stderr def write(self,val,is_stderr=False): #Fun Fact: The way Tkinter Text objects work is that if they're disabled, #you can't write into them AT ALL (via the GUI or programatically). Since we want them #disabled for the user, we have to set them to NORMAL (a.k.a. ENABLED), write to them, #then set their state back to DISABLED. self.write_lock.acquire() self.config(state=tk.NORMAL) self.insert('end',val,'STDERR' if is_stderr else 'STDOUT') self.see('end') self.config(state=tk.DISABLED) self.write_lock.release()

  Read the article

• HYPER-V R2 Can not mount ISO from network location (UNC Path)

  - by Entity_Razer

  So, as the name suggest I'm trying to mount a ISO from a network share using the UNC path to a HYPER-V R2 Cluster. This is a pure Demo / test case setup with: 2x HYPER-V R2 1X NAS/iSCSI CSV Cluster Management is happening through the MMC with RSAT tools. So what i've done so far is: Set up the cluster and configure Quorum, add CSV Shares and disks, set up 1 Virtual Machine on the Hyper-1 node. What i'm trying to do is, you go to settings --- DVD Drive --- use network location ---- Pick ISO file and press "apply". Error I'm getting is either "User account does not have rights to mount iso". I changed that or stopped getting that message when I went to the HYPER-V Node settings and tabbed on: "Use Default Credentials Automatically". Now I stopped getting the "user does not have right..." message but I get the following: Error applying DVD Drive Changes Failed to remove device microsoft synthetic DVD Drive:" the specified network resource or device is no longer available" I've google'd the problem but am unable to find a solution. Anyone here able to help me out ? Much abbliged !

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• Setup VPN issue on Ubuntu Server 12.04

  - by Yozone W.

  I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

  Read the article

• Have I bricked my Sun V20z?

  - by David Mackintosh

  I have a small pile of Sun V20z computers. I was trying to update the SP and BIOS firmwares in order to bring them all up to the same standard -- mostly to get the updated (ie actually useful) SP functionality, and figured that I would just do the BIOS while I was at it. For three of the four computers, it worked perfectly. However after the BIOS update, the fourth system won't boot. I did this: batch05-mgmt $ sp get mounts Local Remote /mnt 10.16.0.8:/export/v20z batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Bios Flash Transmit Started Bios Flash Transmit Complete Bios Flash update Progress: 7 Bios Flash update Progress: 6 Bios Flash update Progress: 5 Bios Flash update Progress: 4 Bios Flash update Progress: 3 Bios Flash update Progress: 2 Bios Flash update Progress: 1 Bios Flash update complete batch05-mgmt $ platform set power state on This command may take several minutes. Please be patient. After an hour of waiting, it still won't start. The chassis powers on, but beyond the fans spinning up and the hardware POST of the drives, nothing appears to happen. So if I try to re-flash the BIOS (on the theory that maybe something went wrong): batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Error. The operation timed out. Have I bricked it?

  Read the article

• Crazy problem with Nginx, PHP5-FPM on Ubuntu

  - by Emmanuel

  I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

  Read the article

• snmpd dead but subsys locked

  - by Hina NMS

  Hi folks I have an NMS and a Client machine. I want the client to send traps to the NMS. I have been configuring the snmpd.conf file testing if i disable a process do i receive an alert or not. For the changes to reflect that were made in the conf file i restarted the snmpd daemon each time. The testing was going fine. All of a sudden when i restarted snmpd i recieved the error msg "snmpd dead but subsys locked". I googled for answer as to what it actually meant and found out that when a service is started a logfile is created in the /var/lock/subsys. Sometimes if the service is not stopped properly or whatever the logfile remains created. Though i started/stopped the snmpd service properly it didnt go away so i removed the file manually (via rm cmd). when i checked the status the error "snmpd dead but subsys locked" was gone. On my NMS i recieved the alert of snmpd coldstart. i started the snmpd service everything goes fine! BUT after 5 mins again i recieve the same error message and this keeps on happening..what do i need to do now?

  Read the article

• How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

  - by Norman Ramsey

  I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

  Read the article

• Unable to connect Xend with virt-manager

  - by Majid Azimi

  I have installed debian 6.0.1a. I have install all XEN stuff. including xen kernel, libvirtd, ... but when i want to connect xend, virt-manager shows me this: Verify that: A Xen host kernel was booted The Xen service has been started details: Unable to open connection to hypervisor URI 'xen:///': unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 971, in _try_open None], flags) File "/usr/lib/python2.6/dist-packages/libvirt.py", line 111, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied here is uname output: Linux debian 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux and also xend and libvirtd is runnig: root@debian:/home/mazimi# /etc/init.d/libvirt-bin status Checking status of libvirt management daemon: libvirtd running. root@debian:/home/mazimi# /etc/init.d/xend start Starting Xen daemons: xenstored xenconsoled xend. permissions for livbirt-sock: root@debian:/home/mazimi# ls -alih /var/run/libvirt/ total 12K 671017 drwxr-xr-x 3 root root 4.0K Apr 15 13:54 . 654083 drwxr-xr-x 18 root root 4.0K Apr 15 13:54 .. 670901 srwxrwx--- 1 root libvirt 0 Apr 15 13:54 libvirt-sock 670928 srwxrwxrwx 1 root libvirt 0 Apr 15 13:54 libvirt-sock-ro 670870 drwxr-xr-x 2 root root 4.0K Apr 15 02:34 qemu and also we have group named libvirt in /etc/group When running libvirtd with verbose mode it behaves kind of stange: root@debian:/var/log/libvirt# /usr/sbin/libvirtd --verbose 17:26:55.841: warning : qemudStartup:1832 : Unable to create cgroup for driver: No such device or address 17:26:56.128: warning : lxcStartup:1900 : Unable to create cgroup for driver: No such device or address and waits infinitely.

  Read the article

• Advice on migrating from a Samba PDC

  - by pgb

  When we started our software development company, we decided to use Samba as a PDC for the few Windows workstations we had. We use Samba with OpenLDAP, and it has been a good replacement for AD for almost 6 years now (using Windows XP workstations). Now I'm facing a few problems with our setup: The Linux server where the PDC runs is very outdated (and is a Gentoo install, don't ask why!) We started using Windows 7 on some of the workstations, and these can't join the Samba domain (there's a workaround, I know) Our company has grown a bit, and we have now about 20 workstations (and plan to have more in the near future). I have to reinstall our PDC, and was thinking on updating to another Linux distro and the latest Samba 3.4. However, I started having second thoughts, and now I think going to a Windows Server for the PDC is the way to go. The main drivers to opt for a Windows Server would be its easy administration and the ability to use Windows 7 out of the box, without any registry hacks. My question(s) then is(are): How should I do this migration? Can I keep the same domain name? What will happen to the users? Will they be recreated and won't be identified by the workstations as being the same user, even if the actual username is the same? What steps would you recommend me to migrate from Samba to Windows Server? Bonus question: If you think staying in Samba is the way to go with my current setup, I'm also interested on your thoughts.

  Read the article

• Fixing partitions and Installing BackTrack

  - by Josh

  My whole problem started when I started trying to install Backtrack(3 or 4) Backtrack was trying to install itself over my entire windows partition (Which I had combined into one when I installed windows 7). So I booted back into windows 7 on my netbook (eee pc 1000 HE btw) I went into disk-manager with the aim of making a partition to install backtrack on but came out with a really screwed up drive. So I had two partions when I started: the windows system partition, and then my main partition and they were blue in diskmanager (I think that has something to do with formatting). After I went through the steps to make a 10 GB FAT32 partition for backtrack I had about five partitons one called PE: that I have no Idea what it is the windows system file, my main partiton 10 GB unallocated space, and two other partions under 50MB each that are both unused space. And they were all converted to simple volumes (Green instead of blue). And backtrack still wants to erase my entire drive. Question number 1: How do I get it back to the way it was? Question 2: How to I get backtrack to dual boot on my netbook?

  Read the article

• Apache, Tomcat 5 and problem with HTTP basic auth

  - by Juha Syrjälä

  I have setup a Tomcat with a webapp that uses http basic auth in some of its URLs. There is a Apache server in front of the Tomcat. I have setup Apache as a proxy like this (all traffic should go directly to tomcat): /etc/httpd/conf.d/proxy_ajp.conf: LoadModule proxy_ajp_module modules/mod_proxy_ajp.so ProxyPass / ajp://localhost:8009/ ProxyPassReverse / ajp://localhost:8009/ There is a webapp installed to root of Tomcat (ROOT.war), so I should be able to use http://localhost/ to access my webapp. But it is not working with http basic auth. The problem is that everything works until I try to access URL that are protected by the HTTP basic auth. URLs without authentication work just fine. When accessing this url via apache I am getting an error message from Apache. If I access the same URL directly from tomcat, everything works just fine. I am getting this to Apache error log: [Wed Sep 01 21:34:01 2010] [error] proxy: dialog to [::1]:8009 (localhost) failed access log looks like this: ::1 - - [01/Sep/2010:21:34:01 +0300] "GET /protected_path/ HTTP/1.0" 503 360 "-" "w3m/0.5.2" I am using: Fedora release 13 (Goddard) httpd-2.2.16-1.fc13.x86_64 tomcat5-5.5.27-7.4.fc12.noarch The basic auth is implemented in the webapp (not in Apache or Tomcat). The webapp is actually implemented in Scala/Lift, but that shouldn't matter. The auth works if I access the tomcat directly. Error message that I am getting from Apache. It is curious that the title is Unauthorized and not Internal error: Unauthorized The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. Apache/2.2.16 (Fedora) Server at my.server.name.com Port 80 It could be that Apache is seeing a some thing else than 200 OK response and thinks that it is an error when it actually should pass the received 401 Unauthorized response directly to browser. If this is the problem, how to fix it?

  Read the article

• How to remove that extra text from URL titles in Firefox browser?

  - by amar

  I am using Firefox with Vimperator. On Mac I use Shiori to bookmark. I also use Pinboard's default add-on (on both Mac and Windows, but mainly on Windows as there's no Shiori). When I used to bookmark, I had this behaviour[A] (before changing Vimperator options): Example: URL: xyz.com TITLE: xyz website Pinboard add-on would fetch the title as xyz website which was fine (I reckon it directly fetches TITLE form the URL). But after installing and starting to use Shiori the title I was getting in its "title" field was xyz website - Vimperator exactly the same what I could see in tabs (seems it's getting what the browser is feeding it). So, I :set titlestring= in Vimperator to remove that extra Vimperator from title. Now, this is what I am getting [B]: When I try to bookmark using Pinboard add-on the title is undefined Using Shiori it results in xyz website - undefined. I tried to change it back to original[C] :set titlestring=Mozilla Firefox (assuming this was the original, before Vimperator) but the results are still the same as [B]. How to get read of that extra - undefined or that extra - Vimperator or - Mozilla Firefox for that matter, while bookmarking pages either with Pinboard add-on or Shiori? One workaround is, instead of no string just add a white-space while setting title in Firefox via Vimperator there but that results in - appended to titles.

  Read the article

• Active Directory FRS problems. 13508 error and other problems

  - by ITPIP

  I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >