Search Results

Search found 466 results on 19 pages for 'fans'.

Page 18/19 | < Previous Page | 14 15 16 17 18 19  | Next Page >

  • Random Computer Crashes

    - by Josh W.
    Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

    Read the article

  • System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

    - by MGOwen
    Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

    Read the article

  • PC will POST whenever feels likes it

    - by kyrpas
    I'm really sick of my PC and I'd love to throw it off the 5th floor but unfortunately I don't have this luxury right now. The issues started when I moved to a new house about 2 months ago. I didn't have this problem before. Case: Arctic Cooling Silentium T1 with embedded Fusion 550 Eco 80 PSU. M/B: ASRock A790GMH/128M Gfx: ATI Radeon HD 5770 Here's what's happening almost on a daily basis: I wake up in the morning, switch on the PC and all the fans start spinning. 9/10 the graphics fan stays on 100% and I know it won't post. If I'm lucky, ATI's fan stays on full power for a second, then goes back to normal and I get a normal post but that doesn't happen often. No, instead it's just drives me crazy. When I get no POST I'm trying a lot of different things and what bothers me the most is that they all work. But not always. No... That way I could find out what the hell is going on and we don't want that.. right? So, sometimes it manages to POST if I: remove the keyboard remove the power cable for a few minutes remove the graphics card remove the HDD cables do nothing, just turn it on and off a few times Sometimes it doesn't POST even if I do all of the above. And I end up removing all power cables from the M/B, and connecting all the stuff one by one. Sometimes it works, sometimes it doesn't and I just have to pray and wait. What the hell is that? I'm getting pissed of again just thinking about it. The only solution is to leave it on 24/7 but I don't want to do that. It should be able to turn on and off when I press the power button. I'm not asking much. I'm starting to think there's some weird electricity/power issue but I really don't understand what it is. There's no logical explanation about it. At least I can't find one. Any ideas?

    Read the article

  • Espeak SAPI/dll usage on Windows ?

    - by Quandary
    Question: I am trying to use the espeak text-to-speech engine. So for I got it working wounderfully on linux (code below). Now I wanted to port this basic program to windows, too, but it's nearly impossible... Part of the problem is that the windows dll only allows for AUDIO_OUTPUT_SYNCHRONOUS, which means it requires a callback, but I can't figure out how to play the audio from the callback... First it crashed, then I realized, I need a callback function, now I get the data in the callback function, but I don't know how to play it... as it is neither a wav file nor plays automatically as on Linux. The sourceforge site is rather useless, because it basically says use the SAPI version, but then there is no example on how to use the sapi espeak dll... Anyway, here's my code, can anybody help? #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include //#include "speak_lib.h" include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int samplerate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ const char *data_path = NULL; // use default path for espeak-data int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); strcpy(voicename, "default"); // espeak --voices strcpy(voicename, "german"); strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; espeak_SetVoiceByProperties(voice_spec); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); espeak_Terminate(); printf("Espeak terminated\n"); return EXIT_SUCCESS; } /* if(espeak_SetVoiceByName(voicename) != EE_OK) { memset(&voice_select,0,sizeof(voice_select)); voice_select.languages = voicename; if(espeak_SetVoiceByProperties(&voice_select) != EE_OK) { fprintf(stderr,"%svoice '%s'\n",err_load,voicename); exit(2); } } */ The above code is for Linux. The below code is about as far as I got on Vista x64 (32 bit emu): #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include include "speak_lib.h" //#include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int iSampleRate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ //const char *data_path = NULL; // use default path for espeak-data const char *data_path = "C:\Users\Username\Desktop\espeak-1.43-source\espeak-1.43-source\"; int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename /* Callback from espeak. Directly speaks using AudioTrack. */ define LOGI(x) printf("%s\n", x) static int AndroidEspeakDirectSpeechCallback(short *wav, int numsamples, espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakDirectSpeechCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } if (numsamples > 0) { //audout->write(wav, sizeof(short) * numsamples); sprintf(buf, "AudioTrack wrote: %d bytes", sizeof(short) * numsamples); LOGI(buf); } return 0; // continue synthesis (1 is to abort) } static int AndroidEspeakSynthToFileCallback(short *wav, int numsamples,espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakSynthToFileCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } // The user data should contain the file pointer of the file to write to //void* user_data = events->user_data; FILE* user_data = fopen ( "myfile1.wav" , "ab" ); FILE* fp = static_cast<FILE *>(user_data); // Write all of the samples fwrite(wav, sizeof(short), numsamples, fp); return 0; // continue synthesis (1 is to abort) } int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); iSampleRate = espeak_Initialize(AUDIO_OUTPUT_SYNCHRONOUS, 4096, data_path, 0); if (iSampleRate <= 0) { printf("Unable to initialize espeak"); return EXIT_FAILURE; } //samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); //ListVoices(); strcpy(voicename, "default"); // espeak --voices //strcpy(voicename, "german"); //strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), //espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); //voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; //espeak_SetVoiceByProperties(voice_spec); //espeak_SetSynthCallback(AndroidEspeakDirectSpeechCallback); espeak_SetSynthCallback(AndroidEspeakSynthToFileCallback); unsigned int unique_identifier; espeak_ERROR err = espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, &unique_identifier, NULL); err = espeak_Synchronize(); /* strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); */ // espeak_Cancel(); espeak_Terminate(); printf("Espeak terminated\n"); system("pause"); return EXIT_SUCCESS; }

    Read the article

  • How to Increase the VMWare Boot Screen Delay

    - by Trevor Bekolay
    If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

    Read the article

  • Answers to “What source control system do you use?” (and some winners)

    - by jamiet
    About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

    Read the article

  • T-SQL Tuesday #21 - Crap!

    - by Most Valuable Yak (Rob Volk)
    Adam Machanic's (blog | twitter) ever popular T-SQL Tuesday series is being held on Wednesday this time, and the topic is… SHIT CRAP. No, not fecal material.  But crap code.  Crap SQL.  Crap ideas that you thought were good at the time, or were forced to do due (doo-doo?) to lack of time. The challenge for me is to look back on my SQL Server career and find something that WASN'T crap.  Well, there's a lot that wasn't, but for some reason I don't remember those that well.  So the additional challenge is to pick one particular turd that I really wish I hadn't squeezed out.  Let's see if this outline fits the bill: An ETL process on text files; That had to interface between SQL Server and an AS/400 system; That didn't use SSIS (should have) or BizTalk (ummm, no) but command-line scripting, using Unix utilities(!) via: xp_cmdshell; That had to email reports and financial data, some of it sensitive Yep, the stench smell is coming back to me now, as if it was yesterday… As to why SSIS and BizTalk were not options, basically I didn't know either of them well enough to get the job done (and I still don't).  I also had a strict deadline of 3 days, in addition to all the other responsibilities I had, so no time to learn them.  And seeing how screwed up the rest of the process was: Payment files from multiple vendors in multiple formats; Sent via FTP, PGP encrypted email, or some other wizardry; Manually opened/downloaded and saved to a particular set of folders (couldn't change this); Once processed, had to be placed BACK in the same folders with the original archived; x2 divisions that had to run separately; Plus an additional vendor file in another format on a completely different schedule; So that they could be MANUALLY uploaded into the AS/400 system (couldn't change this either, even if it was technically possible) I didn't feel so bad about the solution I came up with, which was naturally: Copy the payment files to the local SQL Server drives, using xp_cmdshell Run batch files (via xp_cmdshell) to parse the different formats using sed, a Unix utility (this was before Powershell) Use other Unix utilities (join, split, grep, wc) to process parsed files and generate metadata (size, date, checksum, line count) Run sqlcmd to execute a stored procedure that passed the parsed file names so it would bulk load the data to do a comparison bcp the compared data out to ANOTHER text file so that I could grep that data out of the original file Run another stored procedure to import the matched data into SQL Server so it could process the payments, including file metadata Process payment batches and log which division and vendor they belong to Email the payment details to the finance group (since it was too hard for them to run a web report with the same data…which they ran anyway to compare the emailed file against…which always matched, surprisingly) Email another report showing unmatched payments so they could manually void them…about 3 months afterward All in "Excel" format, using xp_sendmail (SQL 2000 system) Copy the unmatched data back to the original folder locations, making sure to match the file format exactly (if you've ever worked with ACH files, you'll understand why this sucked) If you're one of the 10 people who have read my blog before, you know that I love the DOS "for" command.  Like passionately.  Like fairy-tale love.  So my batch files were riddled with for loops, nested within other for loops, that called other batch files containing for loops.  I think there was one section that had 4 or 5 nested for commands.  It was wrong, disturbed, and completely un-maintainable by anyone, even myself.  Months, even a year, after I left the company I got calls from someone who had to make a minor change to it, and they called me to talk them out of spraying the office with an AK-47 after looking at this code.  (for you Star Trek TOS fans) The funniest part of this, well, one of the funniest, is that I made the deadline…sort of, I was only a day late…and the DAMN THING WORKED practically unchanged for 3 years.  Most of the problems came from the manual parts of the overall process, like forgetting to decrypt the files, or missing/late files, or saved to the wrong folders.  I'm definitely not trying to toot my own horn here, because this was truly one of the dumbest, crappiest solutions I ever came up with.  Fortunately as far as I know it's no longer in use and someone has written a proper replacement.  Today I would knuckle down and do it in SSIS or Powershell, even if it took me weeks to get it right. The real lesson from this crap code is to make things MAINTAINABLE and UNDERSTANDABLE.  sed scripting regular expressions doesn't fit that criteria in any way.  If you ever find yourself under pressure to do something fast at all costs, DON'T DO IT.  Stop and consider long-term maintainability, not just for yourself but for others on your team.  If you can't explain the basic approach in under 5 minutes, it ultimately won't succeed.  And while you may love to leave all that crap behind, it may follow you anyway, and you'll step in it again.   P.S. - if you're wondering about all the manual stuff that couldn't be changed, it was because the entire process had gone through Six Sigma, and was deemed the best possible way.  Phew!  Talk about stink!

    Read the article

  • XBRL - Moving from Production to Consumption

    - by jmorourke
    Here's an update on what’s new with XBRL and how it can actually benefit your organization versus adding extra time and costs to financial reporting.  On February 29th (leap day) of 2012 I attended the XBRL and Financial Analysis Technology Conference at Baruch College in NYC.  The event, which attracted over 300 XBRL gurus and fans was presented by XBRL US, The New York Society of Security Analysts’ Improved Corporate Reporting Committee, and Baruch College’s Robert Zicklin Center for Corporate Integrity.  The event featured keynotes from the U.S. Securities and Exchange Commission (SEC), and the CFA Institute as well as panels covering alternative research tools and data, corporate reporting to stakeholders and a demonstration of XBRL analysis tools.  The program culminated in a presentation of the finalists and the winner of the $20,000 XBRL Challenge.    Some of the key points made in the sessions included: The focus of XBRL tools is moving from production to consumption. As of February 2012, over 9000 companies are reporting in XBRL, with over 10 million facts filed to date XBRL taxonomy extensions have dropped from 27% to 11% making comparisons easier The SEC reports that XBRL makes it easier to analyze disclosures, focus on accounting issues XBRL is helping standards-setters like the FASB speed their analysis of impacts of proposed accounting rule changes Companies like Thomson Reuters report that XBRL is helping speed the delivery of data to clients The most interesting part of the program though, was the session highlighting the 5 finalists in the XBRL Challenge competition and the winning solution.  The XBRL Challenge was launched in 2011 as a means of spurring the development of more end-user tools to help with the consumption of XBRL-based financial information.       Over an 8-month process handled by 5 judges, there were 84 registrants, 15 completed submissions, 5 finalists and one winner of the challenge.  All of the solutions are open-sourced tools and most of them focus on consuming XBRL-based data.  The 5 finalists included: Advanced XBRL Processing from Oxide solutions – XBRL viewer for taxonomies, filings and company data with peer comparison capabilities. Arrelle – API for XBRL processes, supports SEC Validations, RSS Feeds to access filings etc. Calcbench – XBRL data analysis tool that can be embedded in other web applications.  This tool can combine XBRL filings with real-time market data. XBRL to XL – allows the importing of XBRL data into Microsoft Excel for analysis, comparisons.  Users start on the web and populate Excel with XBRL data. XBurble – allows users to search and view XBRL filings, export to Excel, merge for comparison, and includes a workflow interface. The winner of the $20,000 XBRL Challenge prize was CalcBench.  More information about the XBRL Challenge and the finalists can be found at www.XBRLUS.org/challenge XBRL for Sustainability Reporting – other recent news on the XBRL front was the announcement by the Global Reporting Initiative (GRI) of an XBRL taxonomy for Sustainability Reporting.  This taxonomy was co-developed by the GRI and Deloitte and is designed to make the consumption of data found in Sustainability Reports much easier.  Although there is no government mandate to file Sustainability Reports in XBRL format, organizations that do use the GRI guidelines for Sustainability Reporting are encouraged to tag and submit their data voluntarily to the GRI – who will populate a database with Sustainability Reporting data and make this available to the public.  For more information about this initiative, you can go to the GRI web site:  www.globalreporting.org. So how does all of this benefit corporate filers and investors?  Since its introduction, the consensus in the market is that XBRL has mainly benefited the regulators and investment analysts who need to consume and analyze large volumes of financial data.  But with the emergence of more end-user tools for consuming and analyzing XBRL-based data, and the ability to perform quick comparisons of one company versus its peers and competitors in an industry group, will soon accelerate the benefits to corporate finance staff, as well as individual investors.  This could apply to financial results tagged in XBRL, as well as non-financial information such as Sustainability Reporting – which over the long-term will likely be integrated with financial reporting.   And as multiple regulators and agencies in a country adopt the XBRL standard for corporate filings, more benefits will accrue as companies will be able to leverage one set of XBRL-based financial data for multiple regulatory filings.     For more information about the latest developments in XBRL, check out the XBRL US or XBRL International web sites:  www.xbrl.org, www.xbrlus.org. For more information about what Oracle is doing to support XBRL, here are some links: http://www.oracle.com/us/solutions/ent-performance-bi/disclosure-management-065892.html http://www.oracle.com/technetwork/database/features/xmldb/index-087631.html Feel free to contact me if you have any questions or need more information:  [email protected]

    Read the article

  • Thread.Interrupt Is Evil

    - by Alois Kraus
    Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it).  After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was  crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this   static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

    Read the article

  • Using JUnit as an acceptance test framework

    - by Chris Knight
    OK, so I work for a company who has openly adopted agile practices for development in recent years. Our unit tests and code quality are improving. One area we still are working on is to find what works best for us in the automated acceptance test arena. We want to take our well formed user stories and use these to drive the code in a test driven manner. This will also give us acceptance level tests for each user story which we can then automate. To date, we've tried Fit, Fitnesse and Selenium. Each have their advantages, but we've also had real issues with them as well. With Fit and Fitnesse, we can't help but feel they overcomplicate things and we've had many technical issues using them. The business haven't fully bought in these tools and aren't particularly keen on maintaining the scripts all the time (and aren't big fans of the table style). Selenium is really good, but slow and relies on real time data and resources. One approach we are now considering is the use of the JUnit framework to provide similiar functionality. Rather than testing just a small unit of work using JUnit, why not use it to write a test (using the JUnit framework) to cover an acceptance level swath of the application? I.e. take a new story ("As a user I would like to see basic details of my policy...") and write a test in JUnit which starts executing application code at the point of entry for the policy details link but covers all code and logic down to the stubbed data access layer and back to the point of forwarding to the next page in the application, asserting on what data the user should see on that page. This seems to me to have the following advantages: Simplicity (no additional frameworks required) Zero effort to integrate with our Continuous Integration build server (since it already handles our JUnit tests) Full skillset already present in the team (its just a JUnit test after all) And the downsides being: Less customer involvement (though they are heavily involved in writing the user stories in the first place from which the acceptance tests will be written) Perhaps more difficult to understand (or make understood) the user story and acceptance criteria in a JUnit class verses a freetext specification ala Fit or Fitnesse So, my question is really, have you ever tried this method? Ever considered it? What are your thoughts? What do you like and dislike about this approach? Finally, please only mention alternative frameworks if you can say why you like or dislike them more than this approach.

    Read the article

  • How to use Facebook graph API to retrieve fan photos uploaded to wall of fan page?

    - by Joe
    I am creating an external photo gallery using PHP and the Facebook graph API. It pulls thumbnails as well as the large image from albums on our Facebook Fan Page. Everything works perfect, except I'm only able to retrieve photos that an ADMIN posts to our page. (graph.facebook.com/myalbumid/photos) Is there a way to use graph api to load publicy uploaded photos from fans? I want to retrieve the pictures from the "Photos from" album, but trying to get the ID for the graph query is not like other albums... it looks like this: http://www.facebook.com/media/set/?set=o.116860675007039 Another note: The only way i've come close to retreiving this data is by using the "feed" option.. ie: graph.facebook.com/pageid/feed EDIT: This is about as far as I could get- it works, but has certain issues stated below. Maybe someone could expand on this, or provide a better solution. (Using FB PHP SDK) <?php require_once ('config.php'); // get all photos for album $photos = $facebook->api("/YourID/tagged"); $maxitem =10; $count = 0; foreach($photos['data'] as $photo) { if ($photo['type'] == "photo"): echo "<img src='{$photo['picture']}' />", "<br />"; endif; $count+= 1; if ($count >= "$maxitem") break; } ?> Issues with this: 1) The fact that I don't know a method for graph querying specific "types" of Tags, I had to run a conditional statement to display photos. 2) You cannot effectively use the "?limit=#" with this, because as I said the "tagged" query contains all types (photo, video, and status). So if you are going for a photo gallery and wish to avoid running an entire query by using ?limit, you will lose images. 3) The only content that shows up in the "tagged" query is from people that are not Admins of the page. This isn't the end of the world, but I don't understand why Facebook wouldn't allow yourself to be shown in this data as long as you posted it "as yourself" and not as the page.

    Read the article

  • Performing mechanical movements using computer

    - by Vi
    How to make a computer (in particular, my laptop) to perform some mechanical movements without buying anything $5, soldering things inside computer or creating big sophisticated circuits? Traditionally CD-ROM tray is used to make computer do some movement IRL by, for example, SSH command, but in laptop tray is one-shot (unless manually reloaded) and also not very comfortable [mis]usage. Some assistance circuits can be in use too, but not complex. For example, there is a little motor that can work on USB power. Devices in my computer: DVD-ROM tray: one-time push. USB power: continuous power to the motor or LEDS or relay that turns on something powerful. Audio card. 3 outputs (modprobe alsa model=test can set Mic and Line-in as additional output). One controllable DC output (microphone) that can power up LED and some electronic (may be even mechanic?) relay. Also with sophisticated additional circuiting can control a lot of devices with a good precision. Both input and output support. Probably the most useful object in computer for radio ham. Modem. Don't know about this much, it doesn't work because of hsfmodem crashes kernel if memory is = 1GB. May be it's "pick up" and "hang up" can turn on and off power taken from USB port? Video card. VGA port? S-Video port? Will them be useful? Backlight. Tunable, but probably unuseful. CardBus (or some) slot. Nothing interesting for the task probably (is it?). AC adapter and battery. Probably nothing programmable here. /* My AC adapter already have additional jacks to connect extra devics */ Keyboard. No use. Touchpad. Good sensor (synclient -m 1), but no output. Various LEDs inside laptop. Probably too weak and requires soldering. Fans inside laptop. Poor control over them, requires soldering and dangerous to tinker. HDD (internal and external) that can be spin down and up (hdparm -Y, cat /dev/ubb). But connecting anything serially with it's power line makes HDD underpowered... And too complex. Is something are missed? Any ideas how to use described components? Any other ideas? May be there are easily available /* in developing countries */ cheap devices like "enhanced multimeters" that are controllable from computer and can provide configurable output and measure current and other things? Things to aid pushing many physical buttons with computer. Isn't this a simple idea and implementation and a lot of use in good hands?

    Read the article

  • What would make a noise in a PC on graphics operations on a passively-cooled system?

    - by T.J. Crowder
    I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

    Read the article

  • Computer makes hissing noise, turns off after few seconds

    - by Kaustubh P
    I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Intermittent lockups, unable to diagnose in over a year

    - by Magsol
    Here's a real doosie; I may just give my firstborn child to whomever helps me solve this problem. In July 2008, I assembled what would be my desktop computer for graduate school. Here are the specs of the machine I built: Thermaltake 750W PSU Corsair Dominator 2x2GB 240-pin SDRAM Thermaltake Tower Asus P5K Deluxe Motherboard Intel Core 2 Quad Q9300 2.5GHz CPU 2 x GeForce 8600 GT WD Caviar Blue 640GB hard drive CD burner DVD burner Soon thereafter, I ordered a new motherboard (because I was an idiot; that first motherboard supported CrossFire, not SLI), an Asus P5N-D. I was originally running Windows XP SP3. Pretty much right into the start of the fall semester, my desktop would simply lock up after awhile. If my system was largely idling, it would be after 1-3 days. If was gaming, it often happened an hour or two into my gaming session, indicating a link to activity level. Here's where it started getting interesting. I started looking at the system temps. The CPU was warmer than it should have been (~60s C), so I purchased some more efficient cooling compound a way better cooler for it. Now it hardly goes over 40 C. Intel was even kind enough to swap it out for free, just to rule it out. Lockups continued. The graphics cards were also running pretty warm: about 60 C idling. Removing one of them seemed to improve stability a little bit...as in, it wouldn't lock up quite as frequently, but still always eventually locked up. But it didn't matter which card I used or removed, the lockups continued. I reverted back to the original motherboard, the P5K Deluxe. Lockups continued. I purchased an entirely new motherboard, eVGA's nForce 750i. Lockups continued. Ran memtest86+ over and over and over, with no errors. Even RMA'd the memory. Lockups continued. Replaced the PSU with a Corsair 750W PSU. Lockups continued. Tried disconnecting all IDE drives (HDDs are SATA). Lockups continued. Replaced both graphics cards with a single Radeon HD 4980. Average temps are now always around 50 C when idling, 60 C only when gaming. Lockups continued. Throughout the whole ordeal, the system has been upgraded from Windows XP SP3 to Vista 32-bit, to Vista 64-bit, and is now at Windows 7 64-bit. Lockups have occurred at every step along the way (each OS was in place for at least a few months before the next upgrade). Edit: By "upgrade" I mean clean install each time. In addition to those reformats, I have performed many, many other reformats of the system and a reinstall of whatever OS had been previously installed in an attempt to rectify this problem, to no avail./Edit When the system locks up, there's no blue screen, no reboot, no error message of any kind. It simply freezes in place until I hit the reset button. Very, very rarely, once Windows boots back up, the system informs me that Windows has recovered from an error, but it can never find the source aside from some piece of hardware. I've swapped out every component in this computer, and there are more fans in it than I care to count...though for the sake of completeness: top 80mm case fan (out) rear 80mm case fan (out) rear 120mm case fan (out) front 120mm case fan (in) side 250mm case fan (in) giant CPU fan on-board motherboard fan (the eVGA board) triple-fan memory setup (came with the memory) PSU internal fan another 120mm fan I stuck on the underside of the video card to keep hot air from collecting at the bottom of the case I'm truly out of ideas. ANY help at all would be oh-so-very GREATLY appreciated. Thank you!

    Read the article

  • Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

    - by Scott
    Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

    Read the article

  • Determining the required depth and specifications for a server cabinet

    - by Bingu Bingme
    I'm trying to understand the considerations ("why") that go into determining the specifications ("what") for a rackmount server cabinet, in order to determine what sort of rack I should purchase for my home use. Since this is for home use, I won't be following certain best practices (eg. hot/cold aisle, not even air conditioning) and may be willing to sacrifice in various areas in order to reduce cost and footprint - but please advise if there are safety concerns or other considerations to note. The most basic specs for a server cabinet are the dimensions (external width x external depth x usable height). Width: commonly 600mm or 800mm (if the use case requires extra clearance around the sides, such as if there is lots of cabling). In my case and most common cases, I'm going to stick with 600mm. Height: Select a sufficiently tall rack to fit my equipment. But how much may I stuff into it? Eg, if there is a 15U rack, can I really populate it with 15U of servers, or should I leave 1U at top and bottom for air circulation? Depth: Racks commonly have external depth of 600mm (network equipment), 800mm, 1000mm, or even longer. I'm trying to see how to fit into the 800mm depth. With reference to http://www.server-racks.com/rack-mount-depth.html, I'm hoping to have the front and rear posts mounted ~ 28.5" (72cm) apart, which would leave only 8cm for front space and rear space. How much rear space (from rear posts to back of rack) do I really need? I won't use cable management arms, so can I mount a 72cm depth server since the power, KVM, network cables won't take up much depth? My most important equipment are all < 60cm depth (4U chassis) and should comfortably fit within the 800mm cabinet. The rest of the equipment are very old 1U servers that range from 65-72cm depth. I might still want to make further use of them, or I might discard them since they are so old. Even if the 72cm servers cannot be powered on in an 800mm rack, I should be able to use them as 1U shelves. But, what server depth can I expect to be able to operate? Or am I forced to upgrade to 1000mm depth racks in order to use any servers deeper than 60cm? With reference to best practices for HP racks, some other specs and installation considerations: There aren't any minimum recommendations for clearance on the sides of the rack. It is recommended to leave 48" front clearance. The 48" front clearance is based on 32" chassis depth, 13" to extend the rack rails and mate the inner/outer rails, and 3" for movement. If I don't use such rails (eg, use shelves instead), it should be sufficient to leave front clearance of chassis depth + 3". It is recommended to leave 30" rear clearance "to provide space for servicing the rack". I'm planning to back the rack into a corner of the room, and wheel it slightly out when I need to access the rear. If the wheeling plan is ok, I still need to know how much rear clearance is required for air circulation and ventilation purposes. Castor wheels and stabilising feet. Since I'm backing the rack into a corner of the room, I'll only be able to set the stabilising feet on the front corners. Thoughts on safety? The rack that I'm considering has front glass doors with side ventilation slits and fully perforated rear doors. I'm hoping this will be a good balance between temperature and noise (only ventilation slits facing out the front, while the rear is facing the walls). Or is the sound of high-rpm fans going to escape through the front slits anyway and destroy my sanity?

    Read the article

  • Computer not POSTing "randomly"?

    - by smoth190
    I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

    Read the article

  • AMD Catalyst 13.9 installation failure

    - by Simon Verbeke
    Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

    Read the article

  • Gaming blew fuse and causes funny smell: how to overcome?

    - by George Tomlinson
    I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting. EDIT: I tried the Vsync thing, and it seems the situation may have improved, although this may be due to something else: i.e. maybe the PC was working harder yesterday, due to just having downloaded a few things or lots of things running. I'm still noticing the funny smell when playing TERA. It's not so much burning: it's more like glue. The smell might have had a burning element to it in the past, but I think it's always had a glue element. EDIT 2: the PSU is an 'ATX Switching Power Supply', Model E-500ATX. Other info it gives on the PSU is 230V, Current 10A and Frequency 50-60Hz. It also has some other info which I can supply if necessary. Putting the PC plug in the wall socket instead of the power strip seems like it might have reduced the load on the PC quite a bit: I think it sounds less stressed. it has been off for a while whilst I took the side panel off though, so I'll wait to see what happens before getting too excited. EDIT 3: hmm. So here's the latest: just playing TERA. The fan's running quite fast again. Hard to tell whether switching to the wall socket has made a difference in terms of strain on the PC: I don't know if one would expect it to. Still seems like it might have helped though. Oh and there didn't seem to be much dust in the PC, although I didn't disconnect any components. I'm still getting the glue type smell. ASIDE: reminds me of someone on a PC near me at the library once who was actually sniffing glue right there in front of everyone while on the PC and he started talking about how he was sniffing glue. lol. That's no joke. EDIT 4: So the questions now are: Question 1: Is the smell something I should sort out? (If so, how might I do this?) Question 2: is it necessary to take any steps to prevent blowing another fuse (and if so which step/s?).

    Read the article

  • Monitor randomly shutting down, computer accepting no input, need to restart to get working

    - by Sebastian Lamerichs
    First off, spec list: OS: Windows 7 Ultimate 64-bit SP1 CPU: i7-4820k @ 3.7GHz (stock) GPU: Two 3GB Radeon HD 7970s @ 1.05GHz Mobo: AsRock X79 Extreme6 HDD: 2TB Seagate Barracuda 7200rpm RAM: 16GB quad-channel Kingston 1600MHz PSU: Antec HCG 900W Monitors: Acer S220HQL 1920x1080 + ViewSonic VA2251 1920x1080. Plugged into different GPUs. My problem is that, on a daily-ish basis, my monitors will turn off and not turn back on. My computer will still be running, GPU/CPU/case fans all still going, but the monitors will not turn back on. Additionally, it seems to cease all network activity. It doesn't seem to log any errors at all. I've verified that this is not a monitor issue, as when I press the num/caps/scroll lock buttons on my keyboard, the lights don't change, so the computer is clearly not accepting input. I have noticed a few other people on the internet with this problem, and some have claimed that it was solved by disabling PCI-Express Link State Power Management, but the issue still occurs for me after this. Whilst my CPU and GPUs both run at 100% 24/7, the temperatures are certainly not at dangerous levels, with the CPU averaging 65°C and the GPUs at 70°C and 78°C average. All components are brand new. I have tried forcing MSI Afterburner to start when Windows starts and to force a constant voltage, as this fixed the issue for a few days for another user, but he reported back saying that it had stopped working properly again, so I'm not putting too much faith in this working. Many people have said to adjust display sleep mode settings, but this will clearly not work, as the keyboard lights would still work if the monitors were the issue. The closest I can get to a log file for this issue is the following Folding@Home logs: 14:45:21:WU01:FS00:0x17:Completed 1120000 out of 2000000 steps (56%) 14:46:43:WU00:FS01:0x17:Completed 480000 out of 2000000 steps (24%) 14:46:49:WU01:FS00:0x17:Completed 1140000 out of 2000000 steps (57%) 14:48:30:WU01:FS00:0x17:Completed 1160000 out of 2000000 steps (58%) 14:49:55:WU01:FS00:0x17:Completed 1180000 out of 2000000 steps (59%) As you can see, the second GPU (FS01) stops computation approximately three and a half minutes before the issue occurs (it should be completing 1% every 80-120 seconds), and the first GPU (FS00) continues for a few minutes more before the logs just end. As far as I can tell, the computer has a network failure at the time the first GPU stops working, the latest IRC message I received from this time was at 14:47:58. That being said, there could have just not been any messages between then and 14:50:00, so I'm going to be connecting a laptop to the same bouncer to double-check if it happens again. The GPUs functioned perfectly well in another computer for a significant period of time, so I'm fairly confident that they aren't the issue, which means that this is being caused by either software or the motherboard, or possibly RAM. I really hope it's software. I heard from a forum board that there was a patch from Microsoft that fixed this problem, but "I've forgot which KB it was or the google search terms I used to find the patch, LOL.", so that's not much help. Haven't seen it mentioned by anyone else on about a dozen threads about this issue either. The computer is plugged in via a surge-protected power board, and I've run several other computers and pieces of hardware through it with no issues, so that is not the cause. I have just set the hard disk to never turn off, although I don't believe that that will solve the issue. Strangely, this has only happened when I'm not at the computer (which is actually a minority of the time). Until today it had only happened when I had not been actively using the computer for 6 hours, but today it happened within 10-30 minutes of me last using the computer actively. I have enabled file logging from MSI Afterburner, so hopefully this will shed some light on the issue, but I'm not too optimistic. I've heard that it could be a motherboard problem, but I figured I should ask around before RMAing it. Any help?

    Read the article

  • I&rsquo;m sorry RPGs, it&rsquo;s not you, it&rsquo;s me: The birth of my game idea

    - by George Clingerman
    One of the things I’ve had to give up in order to have some development time at night is gaming. It’s something I refused to admit for years but I’ve just had to face the facts. I’m no longer a gamer. I just don’t have hours and hours of free time to pour into gaming and when I do have hours and hours of free time I want to pour them into game development. That doesn’t mean I don’t game at all! I play games pretty much every day. It just means I’ve moved more into the casual game realm. It’s all I have time for when juggling priorities in my life. That means that games like Gears of War 2 sit shrink wrapped on my shelf and although I popped Dragon Age into my Xbox 360 one time, I barely made it through the opening sequence and haven’t had time to sit down and play again. Instead I’m playing short games like Jamestown, Atom Zombie Smasher, Fortix or if I have time to jump in and play a few rounds maybe some Monday Night Combat or Team Fortress 2. These are games I can instantly get into and play for just a short period of time and then walk away. Breath of Death VII saved my life: Back in the day (way, way back in the day) I used to be a pretty big RPG fan. Not big by a lot of RPG gamers' standards (most of the RPGs RPG fans about I’ve never heard of) but I used to LOVE to play them on the NES, SNES and Genesis and considered that my genre. Final Fantasy, Shining in the Darkness, Bard’s Tale, Faxanadu, Shadowrun, Ultima, Dragon Warrior, Chrono Trigger, Phantasy Star, Shining Force and well the list could go on but those are the ones I remember off the top of my head. I loved playing RPGs and they were my games of choice. After my first son was born (this was just about 12 years ago), I tried to continue playing RPGs and purchased games like Baldur’s Gate I & II, Neverwinter Nights, Fable, then a few of the Final Fantasy’s then Kingdom Hearts. I kept buying these games and then only playing for about fifteen minutes and never getting back to them. I still loved RPGs but they just no longer fit into my life (I still haven’t accepted that since I still purchased Dragon Age II for some reason and convinced myself I’d find the time). Adding three more sons to the mix (that’s 4 total) didn’t help much to finding more RPG time (except for Breath of Death VII and other XBLIG RPG titles, thanks guys!) All work and no RPG: A few months ago as I was sitting thinking about the lack of RPGs in my life and talking to my wife about why I wish RPGs were different and easier for a dad like me to get into. She seemed like she was listening, so I started listing all the things that made them impossible for me to play. Here’s a short list I came up with. They take 15 billion hours to complete I have a few minutes at a time I can grab to play them if I want to have time to code. At that rate it would take me 9 trillion years to beat just one RPG. There’s such long spans of times between when I can play them I forget what I was even doing so I have to spend most of the playtime I have just figuring that out and then my play time is over. Repeat. I’ll never finish one and since it takes so long to get to the fun part in an RPG, I’m never having fun. RPGs aren’t fun if you don’t have hours to play them at a time. As you can see based on my science and math, RPGs aren’t fun for me any more. From there my brain started toying around with ideas of RPGs that would work for me. They would have to be a short RPG, you know one you could beat in a single play session. A dad sized play session. I started thinking, wouldn’t it be awesome if there was a fifteen minute RPG? That got me laughing and I took that as a good sign that it sounded fun and so I thought about it a little more. I immediately discarded the idea of doing a real RPG. I’m sure a short RPG like that could be done but it wasn’t the vibe that I had in my head. No this was going to be something that just had the core essence of an RPG. In reality what I’d be making would be more of an arcade style game. One with high scores and lots of crazy action on the screen. And that’s when it hit me. It would be a speed run RPG. That’s the basics of the game I’m working on.   The Elevator Pitch: It’s a 2D top down RPG themed arcade game focused on speed. It sounds like an RPG, smells like an RPG but it’s merely emulating an RPG. The game is focused on fun and mayhem in RPG form with players leveling up in seconds instead of hours and rushing to finish quests as quickly as possible because they’ve only got fifteen minutes before EVIL overtakes the world. If the player takes longer than fifteen minutes, it’s game over man. One to four player co-operative play to really see just how fast players can level up and beat the game. Gamers will compete on leaderboards for bragging rights for fastest 1, 2, 3, and 4 player speed runs, lowest leveled characters to beat the game, highest leveled characters to beat the game and so on. Times will be tracked for everything from how long a player sat distributing stats, equipping items, talking to NPCs to running around the level. These stats will be shown at the end of each quest/level so the players can work on improving their speed run for that part of the game next time around. It’s the perfect RPG for those of us who only have fifteen minutes of game time! Where I’m at: I’m still at the prototyping stage attempting to but all the basic framework pieces in place that will at minimum give me one level to rush through. I’ve been working on this prototype for about a month now though so I’m going to have to step it up a bit or I’m not going to get finished in time (remember I’ve only got 85 days left!) Lots of the game code is in place (although pretty sloppy) but I still can’t play through that first quest/level just yet. That’s my goal to finish up by the end of next Sunday (3/25/2012). You can all hold me to that and cheer me on or heckle me throughout the week. Either way that should help me stay a bit more motivated and focused. In my head this feels like it’s going to be a fun game so I’m looking forward to seeing how it actually plays!

    Read the article

  • How can I keep the cpu temp low?

    - by Newton
    I have an HP pavilion dv7, I'm using ubuntu 12.04 so the overheating problem with sandybridge cpu is a lot better. However my laptop is still becoming too hot to keep on my legs. The problem is that the fan wait too much before starting, so the medium temp is too hight. When I'm using windows 7 the laptop is room-temperature cold, I've absolutely no problem. On windows the fan is always spinning very low & very silently so the heat is continuously removed, without reaching an unconfortable temp. How can I force the computer to act like that also on ubuntu? PS The bios can't let me control this kind of thing, and this is my experience with lm-sensors and fancontrol al@notebook:~$ sudo sensors-detect [sudo] password for al: # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Hewlett-Packard HP Pavilion dv7 Notebook PC (laptop) # Board: Hewlett-Packard 1800 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8518 Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Next adapter: i915 gmbus disabled (i2c-0) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus ssc (i2c-1) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOB (i2c-2) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus vga (i2c-3) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOA (i2c-4) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus panel (i2c-5) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 GPIOC (i2c-6) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpc (i2c-7) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOD (i2c-8) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpb (i2c-9) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOE (i2c-10) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus reserved (i2c-11) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpd (i2c-12) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOF (i2c-13) Do you want to scan it? (YES/no/selectively): y Next adapter: DPDDC-B (i2c-14) Do you want to scan it? (YES/no/selectively): y Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK al@notebook:~$ sudo /etc/init.d/module-init-tools restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop module-init-tools ; start module-init-tools. The restart(8) utility is also available. module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools restart stop: Unknown instance: module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools start module-init-tools stop/waiting al@notebook:~$ sudo pwmconfig # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Is my case too desperate?

    Read the article

< Previous Page | 14 15 16 17 18 19  | Next Page >