Search Results

Search found 13404 results on 537 pages for 'george host'.

Page 18/537 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• My client's solution of a Windows SBS 2011 VM on an Ubuntu host and VirtualBox is pinning the host CPU

  - by Scott Stamp

  Here's my situation, I've got a client hosting two servers (one VM), with the host providing VMware Zimbra, the other Windows Small Business Server 2011. Unfortunately, the person before me had configured this setup as follows. Host: Ubuntu Desktop Edition 10.04 (I know, again, not my choice) running VMware Zimbra 8GB of RAM On-board RAID1 of two 320GB Seagate Barracuda drives for the OS Software RAID5 of four 500GB WD Caviar Black drives on MDADM for bulk storage (sorry, I don't know the model #) A relatively competent quad-core Intel Core i7 CPU from the Nehalem architecture (not suspicious of this as the bottleneck) Guest: Windows Small Business Server 2011 4GB of RAM Host-equivalent CPU allocation VDI file for OS hosted on the on-board RAID, VDI file for storage hosted on the on-board RAID For some reason when running, the VM locks up when sitting nearly idle, and the VirtualBox process reports values of 240%+ in top (how is that even possible?!). Anyone have any ideas or suggestions? I'm totally stumped on this one. Happy to provide whatever logs you'd like to take a look at. Ideally I'd drop VirtualBox and provision this with VMware Workstation, but the client has objected to the (very nominal) costs involved. If hardware needs to be purchased to help, it will be, but we're considering upgrades a last-resort at this time. Thanks in advance! *fingers crossed*

  Read the article

• Host multiple domains with Apache on a VPS

  - by Kunal

  Hi I have recently bought a windows VPS and installed apache, mysql using xampp. All services are running fine. I can access the hosted site using the IP of VPS but what I need to do is host multiple domains on that server. Actually my requirement was to use htaccess on a php based site but the site had to access data from ms sql server as well. So needed to enable php_mssql.dll in the php.ini which no shared hosting was supporting. Had to go for this VPS. Plesk was installed by default but as htaccess wont work with IIS, I had to stop IIS service and install apache there. Now all is well, but I need to find a way to host multiple domains there. When I bought the VPS they hosting people sent me the dedicated IP of the server and also I have the 2 name servers required to host domains. What is the next step? Exactly which file I need to modify to get things done? Please help! Any kind of help is much appreciated. Thanks in advance for all of your kind help and time.

  Read the article

• Adding subnet to a vsphere with single vcenter and esxi host

  - by Ilya Rakhlin

  Let me start of by saying that I do not specialize in networking, I am in the process of adding additional VMs to a testing environment and wanted some recommendations. In this case I am running a single ESXI 5.1 host and a single Vcenter management server. The problem is, I need another range of IP addresses added to the existing setup; hopefully without reconfiguring everything. Currently the esxi host is configured to IP: 192.168.100.200, gateway: 192.168.100.1 and subnet: 255.255.255.0. All of the VMs are running some version of linux with hard coded IP addresses in that range, and using that subnet. The VMs I am about to deploy I want to be on the 192.168.101.X network. Is it possible to add an additional subnet to this existing system that will also communicate with the current subnet? The esxi host has 6 physical NICs but only one connected as it is only a testing system; not sure if that matters. Are there any other ways to accomplish this hopefully without restarting or at least reconfiguring the IP addresses for each VM? Reason: Due to the configuration of the VMs to run the applications that we need I am using a large amount of the current IPs in the potential range (mostly VIPs). I will be setting up a new version of this “environment” while keeping the old one, thus potentially running out of IP addresses.

  Read the article

• Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

  - by gts123

  I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

  Read the article

• SSH to remote host (edgemarc 4200 or 4500 series routers) and pull arp data

  - by MaQleod

  I've been trying to think of a method to do this for days, but have not come up with anything yet. Ideally, this is what I'm looking to do: From a windows XP machine, I need to open an SSH connection to a remote host, send the arp command, and pull the text results of the command back for use on the client. I will need to parse this data and preferably produce a 2D array of IPs and MAC addresses. There will be no shared keys, this is all done with a username and password that will always be different, they will need to be fed into the command via variables that will be pulled from a database using an autoit script based on the WAN ip of the remote host. Now the actual parsing of the data and creation of the array will be easy if I can just get the text of the arp table. Is there any way to ssh to a remote host, run a command and return the data from that command to the client in a batch script or perl script (it is ok if it writes the text to a file, I can read it out of the file later, I just need it to get to the client)?

  Read the article

• Xen virtual host can reach some sites but not others

  - by Tun H S Lee

  Okay, this is killing me. Debian Squeeze, Xen 4.0, brand new install. No iptables rules whatsoever except for the ones added by the default xen bridge script. Dom0 can reach the entire world, no problems. DomU can receive packets from some hosts, but not from others. For instance, if I ping Host A, it works fine. If I ping Host B, the DomU reports 100% packet loss. The hosts are random, but consistent (even after reboots). I can see no pattern to why some work and others don't. In fact, in some cases, different virtual hosts on the same server (an other server at a different data center) are divided; some work and others do not. I can reboot (DomU or Dom0 too) and the same hosts will work or fail as before. If I tcpdump on the Host B while pinging from the DomU, everything looks fine. It sees the echo request coming in and says it's sending one back. However, if I tcpdump peth0 on the Dom0, it never sees the echo reply. Any ideas what could be happening? I'm tearing my hair out here.

  Read the article

• Apache not routing to tomcat on correct Virtual host

  - by ttheobald

  We are looking at moving from Websphere to Tomcat. I'm trying to send traffic to tomcat from apache web server based on the virtual host directives in apache web server. After some playing around I have it sort of working, but I'm noticing that if I have a JKMount directive in the first VirtualHost in apache, all virtualHosts will send to the application server. If I have the JKMount in Virtual hosts further down in the configs, then only that VirtualHost works with the request. For Example, with the configs below here are my symptoms mysite.com/Webapp1/ -- I resolve to the proper application mysite2.com/Webapp1/ -- I resolve to the proper application (bad!) mysite.com/MonitorApp/ -- I resolve to the proper application mysite2.com/MonitorApp/ -- I resolve to the proper application (bad!) mysite.com/Webapp2/ -- I DO NOT get to the app (good) mysite2.com/Webapp2/ -- I resolve to the proper application Here's what my web server virtualhosts look like. <VirtualHost 255.255.255.1:80> ServerName mysite.com ServerAlias aliasmysite.ca ##all our rewrite rules JkMount /Webapp1/* LoadBalanceWorker JKmount /MonitorApp/* LoadBalanceWorker </VirtualHost> <VirtualHost 255.255.255.2:80> ServerName mysite2.com ServerAlias aliasmysite2.ca ##all our rewrite rules JkMount /Webapp2/* LoadBalanceWorker </VirtualHost> we are running apache webserver 2.2.10 and tomcat 7.0.29 on Solaris10 I've posted an image of our architecture here. http://imgur.com/IFaA6Rh I HAVE not defined VirtualHosts on Tomcat. Based on what I've read, my understanding is that it's only needed if I'm accessing Tomcat directly. Any assistance is appreciated. Edit Here's my worker.properties. worker.list= LoadBalanceWorker,App1,App2 worker.intApp1.port=8009 worker.intApp1.host=10.15.8.8 worker.intApp1.type=ajp13 worker.intApp1.lbfactor=1 worker.intApp1.socket_timeout=30 worker.intApp1.socket_connect_timeout=5000 worker.intApp1.fail_on_status=302,500,503 worker.intApp1.recover_time=30 worker.intApp2.port=8009 worker.intApp2.host=10.15.8.9 worker.intApp2.type=ajp13 worker.intApp2.lbfactor=1 worker.intApp2.socket_timeout=30 worker.intApp2.socket_connect_timeout=5000 worker.intApp2.fail_on_status=302,500,503 worker.intApp2.recover_time=30 worker.LoadBalanceWorker.type=lb worker.LoadBalanceWorker.balanced_workers=intApp1,intApp2 worker.LoadBalanceWorker.sticky_session=1

  Read the article

• Slow network interaction between 2 kvm host machines

  - by VirtualNoob

  We have 2 physical machines, Host1 is a CentOS 6.4 kvm host and hosts ~7 kvm VMs all running Ubuntu 12.04 - all of this runs perfectly. Recently we've added a 2nd host system, host2, again a CentOS 6.4 kvm host with a view to running another couple of VMs and providing some failover against host1 should it be required. Both physical machines reside in the same cabinet in our DC, and are on the same subnet - let's say host1: 1.1.1.64 and host2: 1.1.1.81. Both have their gateway set to the DC gateway of 1.1.1.254 with no hardware firewall in between. On each machine, I have 4 NICs that are bonded together to form a single interface, which is then bridged to allow the VMs to access the network. All of the VMs are online, and all of them can successfully ssh into the hosts without any delay. Both systems can access the internet fine, and I can ssh into both systems from home without any issues. However, there is a real delay when attempting to ssh from host1 to host2 (or vice versa) and this obviously means that any action required on host2, that is controlled by host1 either takes forever or results in failure due to timeout. In the interest of keeping this post short, I've put my ifcfg files into a pastie: http://pastie.org/8081648 I've tried both adding a firewall rule in each machine for the other, and also disabling the firewall entirely, so that can't be the issue. I've tried troubleshooting this myself but can't seem to get to the bottom of it. Any help or advice would be appreciated. Thanks in advance.

  Read the article

• How to publish an ASP.NET MVC application to a free host

  - by Lirik

  Hi, I'm using a free web host (0000free) which supports ASP.NET MVC, but it uses Mono. This is the first time I deploy an MVC application, so I'm a little confused as to where I need to deploy it. I have Visual Studio 2010 and I used its Publish Feature (i.e. right click on the project name and click publish) and I tried several things: Publish method: FTP to the root folder. Publish method: FTP to the publich_html folder. Publish method: File System to the root folder. Publish method: File System to the publich_html folder. Publish method: File System to a local directory on my computer and then FTP to root and also tried the public_html folder. I went into the cPanel (control panel) to try and see if ASP.NET has to be added/enabled for my web site, but I didn't see anything there. I can't browse to Index.aspx nor can I redirect to it from index.html (as suggested from other posts on the host forum), right now I have a link from index.html to Index.aspx but it's not working either (see http://www.mydevarmy.com) I've also tried renaming Index.aspx to Default.aspx, but that doesn't work either. The search utility of the forum of the host is somewhat weak, so I use google to search their forum: http://www.google.com/search?q=publish+asp.net+site%3A0000free.com%2Fforum%2F&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a I've been reading Pro ASP.NET MVC Framework and they have a chapter about publishing, but it doesn't provide any specific information with respect to the location of publishing, this is all they say (and it's not very helpful in my case): Where Should I Put My Application? You can deploy your application to any folder on the server. When IIS first installs, it automatically creates a folder for a web site called Default Web Site at c:\Inetpub\wwwroot\, but you shouldn’t feel any obligation to put your application files there. It’s very common to host applications on a different physical drive from the operating system (e.g., in e:\websites\ example.com). It’s entirely up to you, and may be influenced by concerns such as how you plan to back up the server. Here is the exception I get when I try to view my Index.aspx page: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) Description: HTTP 500. Error processing request. Stack Trace: System.Configuration.ConfigurationErrorsException: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) at System.Configuration.ConfigurationElement.DeserializeElement (System.Xml.XmlReader reader, Boolean serializeCollectionKey) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DoDeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSectionInstance (System.Configuration.SectionInfo config, Boolean createDefaultInstance) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSectionCollection.get_Item (System.String name) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSection (System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path, System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetWebApplicationSection (System.String sectionName) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.get_CompilationConfig () [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.Build (System.Web.VirtualPath vp) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.Web.VirtualPath virtualPath) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] in <filename unknown>:0 at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] in <filename unknown>:0

  Read the article

• Server currently under DDOS, not sure what to do

  - by Volex

  My web server is currently under a DDOS attack I believe, the messages log is full of these kind of messages: May 13 15:51:19 kernel: nf_conntrack: table full, dropping packet. May 13 15:51:19 last message repeated 9 times May 13 15:51:24 kernel: __ratelimit: 78 callbacks suppressed May 13 15:51:24 kernel: nf_conntrack: table full, dropping packet. May 13 15:52:06 kernel: possible SYN flooding on port 80. Sending cookies. and a netstat has a huge amount of the following: tcp 0 0 my.host.com:http bb176da0.virtua.com.br:4998 SYN_RECV tcp 0 0 my.host.com:http 187.0.43.109:2694 SYN_RECV tcp 0 0 my.host.com:http 109.229.4.145:1722 SYN_RECV tcp 0 0 my.host.com:http 189-84-163-244.sodobr:63267 SYN_RECV tcp 0 0 my.host.com:http bd66839d.virtua.com.br:3469 SYN_RECV tcp 0 0 my.host.com:http 69.101.56.190.dsl.int:52552 SYN_RECV tcp 0 0 my.host.com:http pc-62-230-47-190.cm.vt:2262 SYN_RECV tcp 0 0 my.host.com:http 189-84-163-244.sodobr:63418 SYN_RECV tcp 0 0 my.host.com:http pc-62-230-47-190.cm.vt:1741 SYN_RECV tcp 0 0 my.host.com:http zaq3d739320.zaq.ne.jp:2141 SYN_RECV tcp 0 0 my.host.com:http netacc-gpn-4-80-73.po:52676 SYN_RECV tcpdump shows: 7:11:08.564510 IP 187-4-1xx-4.xxx.ipd.brasiltelecom.net.br.54821 > my.host.com.http: S 999692166:999692166(0) win 65535 <mss 1452,nop,nop,sackOK> 17:11:08.566347 IP 114-44-171-67.dynamic.hinet.net.1129 > my.host.com.http: S 605369055:605369055(0) win 65535 <mss 1440,nop,nop,sackOK> 17:11:08.570210 IP 200-101-13-130.pvoce300.ipd.brasiltelecom.net.br.5590 > my.host.com.http: S 2813379182:2813379182(0) win 16384 <mss 1460,nop,nop,sackOK> 17:11:08.571290 IP dsl-189-143-30-99-dyn.prod-infinitum.com.mx.1615 > my.host.com.http: S 281542700:281542700(0) win 65535 <mss 1452,nop,nop,sackOK> 17:11:08.583847 IP dsl-189-143-30-99-dyn.prod-infinitum.com.mx.1617 > my.host.com.http: S 499413892:499413892(0) win 65535 <mss 1452,nop,nop,sackOK> 17:11:08.588680 IP 170.51.229.112.2569 > my.host.com.http: S 2195084898:2195084898(0) win 65535 <mss 1460,nop,nop,sackOK> 17:11:08.588773 IP gw2-1.211.ru.3180 > my.host.com.http: F 2315901786:2315901786(0) ack 2620913033 win 64240 17:11:08.590656 IP 200-101-13-130.pvoce300.ipd.brasiltelecom.net.br.5614 > my.host.com.http: S 2813715032:2813715032(0) win 16384 <mss 1460,nop,nop,sackOK> 17:11:08.591212 IP 203.82.82.54.15848 > my.host.com.http: S 4070423507:4070423507(0) win 16384 <mss 1400,nop,nop,sackOK> 17:11:08.591254 IP 203.82.82.54.2545 > my.host.com.http: S 1790910784:1790910784(0) win 16384 <mss 1400,nop,nop,sackOK> 17:11:08.591289 IP 203.82.82.54.28306 > my.host.com.http: S 578615626:578615626(0) win 16384 <mss 1400,nop,nop,sackOK> 17:11:08.591591 IP gw2-1.211.ru.3191 > my.host.com.http: F 2316435991:2316435991(0) ack 2634205972 win 64240 17:11:08.591790 IP 200-101-13-130.pvoce300.ipd.brasiltelecom.net.br.5593 > my.host.com.http: S 2813659017:2813659017(0) win 16384 <mss 1460,nop,nop,sackOK> 17:11:08.593691 IP gw2-1.211.ru.3203 > my.host.com.http: F 2316834420:2316834420(0) ack 2629074987 win 64240 I'm not sure what I can do to limit/mitigate this, currently no webpages are being served, any help gratefully appreciated.

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• Domino HTTP Server: Error - Unable to Bind 1.2.3.4, port 80, port in use or Bind To Host configuration specifies a duplicate IP address/host

  - by pdewaard

  We have a Domino 9.0.1 Server hosted on Ubuntu 14.04 Server, which hosts several other http based Tasks, (Nginx, Couchdb, Confluence on Tomcat). The Ubuntu Server has multiple IPs, all bind correctly to the different Tasks. The Domino SMTP task binds correctly and is working well. All http tasks (other than Domino) are proxied behind Nginx version 1.6x and all are working well, netstat shows no 0.0.0.0 bindings, no one is listening on 1.2.3.4:80 . when I try to load http on the (Domino) server console it failes with HTTP Server: Error - Unable to Bind 1.2.3.4, port 80, port in use or Bind To Host configuration specifies a duplicate IP address/host a couple of times, may be 4 or 5 times then it loads without failure! And: when it comes up, I see http is listening on 80 AND 443, but SSL Connections are not working, nor any error log! It must be a kind of bad magic :-( thanks in advance Pitt

  Read the article

• Mixing SSL and non-SSL content in an Apache2 virtual host

  - by gravyface

  I have a (hopefully) common scenario for one of my sites that I just can't seem to figure out how to deploy correctly. I have the following site and directories for example.com: These need to require SSL: /var/www/example.com/admin /var/www/example.com/order These need to be non-SSL: /var/www/example.com/maps These need to support both: /var/www/example.com/css /var/www/example.com/js /var/www/example.com/img I have two virtual host declarations for the one site in my /sites-available/example.com file; the top one is *:443 the second one is *:80. Since I have two sites, and if a request comes in on 443, the top virtualhost is used, same with the bottom if it's a port 80 request. However, I can't seem to enforce my SSL requirements using SSLRequireSSL because I'm assuming a port 80 request to /admin or /order is not even hitting the *:443 vhost. Should I just Deny All to /order and /admin within the *:80 virtual host so that if you try to request it on 80, you'll get a 403 Forbidden?

  Read the article

• Getting a VMnet0 error in VMWare workstation after updating host computer from Windows 8 to 8.1

  - by Andrew

  Yesterday, I updated my computer from Windows 8 to 8.1. I have VMWare Workstation 10 running Windows XP on this computer and prior to the update I had no issues connecting to my network. However, since updating, I haven't been able to connect to any network and I'm getting the following error: "The network bridge on device VMnet0 is not running. The firtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet0" I've checked all of my settings which currently have my network adapter set for a bridged connection and under device status "connected" is checked. Not really sure where to go from here, but after doing some research I have seen that others users have reported getting this error when updating the OS (any OS, not windows 8 specifically) of the host computer. Thanks in advance to anyone who can help.

  Read the article

• SSH: Tunnel multiple ports to remote server

  - by user1594322

  See attached diagram. Host A - Windows server Host B - Linux server Host C - VMWare ESXi server From host A I can SSH to host B over the VPN tunnel. I can ping host C from host B, but not from host A. I am assuming this is because host C has lost its default gateway. Host C is a VMWware ESXi server, so I would need to tunnel several ports (80,443,902) in order to reach host C from host A. What is the correct ssh syntax to create the tunnel in order to reach host C from host A, and can I do it using a single command, or do I need to run three commands (one for each port, 80,443,902)?

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• setting up a basic mod_proxy virtual host

  - by SevenProxies

  I'm trying to set up a basic virtual host to proxy all requests to test.local to a WEBrick server I have running on 127.0.0.1:8080 while keeping all requests to localhost going to my static files in /var/www. I'm running Ubuntu 10.04. I have libapache2-mod-proxy-html installed and I have the module enabled with a2enmod proxy. I also have my virtual host enabled. However, whenever I go to test.local I always get a cryptic 500 server error and all my logs are telling me is: [Thu Mar 03 01:43:10 2011] [warn] proxy: No protocol handler was valid for the URL /. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Here's my virtual host: <VirtualHost test.local:80> LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so ServerAdmin webmaster@localhost ServerName test.local ProxyPreserveHost On # prevents this folder from being proxied ProxyPass /static ! DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined and here's my settings for mod_proxy: <IfModule mod_proxy.c> #turning ProxyRequests on and allowing proxying from all may allow #spammers to use your proxy to send email. ProxyRequests Off <Proxy *> # default settings #AddDefaultCharset off #Order deny,allow #Deny from all ##Allow from .example.com AddDefaultCharset off Order allow,deny Allow from all </Proxy> # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block ProxyVia On </IfModule> Does anybody know what I'm doing wrong? Thanks

  Read the article

• can't resolve host (A) but FQDN is fine

  - by user1431356

  I am getting inconsistent name resolution locally with DNS I have 3 2012 Standard servers and some weirdness on 1. It is a standard install with IIS role added. TEST01 is a dev server. 192.119.1.220 with a host header of TEST01. DATA01 runs internal DNS on .240 and all servers and clients point here for DNS. There is a forward in DNS to 192.119.1.1 (router) with ISP external DNS #s mapped. if I ping TEST01 from a non AD machine, it I get "Could not find Host TEST01" If I ping TEST01 from a domain machine(another server), it resolves the IP but does not respond. if I ping TEST01.AD.local, DNS resolves the IP, but times out. I can access IIS by entering http://test.WWWDOMAIN.com and I can RDP to it, just not ping. Any idea where I should start?

  Read the article

• Dynamips Virtual Router not pinging external host after bridging

  - by maiky

  I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

  Read the article

• Host new WF4 workflows in appfabric

  - by racingcow

  Hello, I am new to using AppFabric to host WF services. I am trying to write a workflow admin application that will allow users to create xaml workflow definitions using the hosted WF4 designer, and then somehow allow those workflow defitions to be automatically deployed and hosted in AppFabric with the click of a button. I have the designer going, and I have read a couple of tutorials on how to host workflow services in AppFabric such as http://msdn.microsoft.com/en-us/library/ee677238.aspx, but my problem is how to deploy and host the workflow services via code. Does anyone know if this sort of "autodeploy/host" thing can be done with AppFabric? If so, could you point me in the right direction on this? -David

  Read the article

• Configure Nagios To Alert Depending On Host Group That Service Alert Originates From

  - by StrangeWill

  So my setup: Services are shared between all hosts (CPU/RAM/Disk/Services). Hosts are split into two main groups: "Production" and "Development". We have two contact groups: "Production" and "Development". Lets say my development SQL server runs low on RAM, I want it to only alert those in "Development" contact group (this service is of course assigned to a host in the "Development" host group, using the shared RAM monitoring service). I'm pretty much stumped on this... I can't configure it at the service level (they're shared there), and I can't seem to get escalations to do it for me either... Do I need to use service groups along with escalations and bite the bullet on building that list? Or am I missing something stupidly simple? I'm using Centreon for configuration if that helps.

  Read the article

• Ubuntu VM Guest - Samba Service Not Accessible from VM Host via Hostname

  - by phalacee

  I have a Windows 7 Workstation with a Ubuntu 10.10 VM running in Virtual Box 3.2.12 r68302. I recently updated Samba and winbind, and since the update, I am unable to access the machine via it's hostname (\mystique) from the VM Host. I can access it by the "Host-only" IP (\192.168.56.101) and the DHCP Assigned IP address (\10.1.1.20) and I can connect to the webserver on the machine via it's hostname (http://mystique/). As stated, accessing this machine via it's hostname worked fine prior to the update, but has since stopped working. I have added the hostname to the smb.conf for the netbios name, to no avail. My smb.conf [global] section looks like this: workgroup = NETWORK netbios name = Mystique server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user usershare allow guests = yes

  Read the article

• Backing up VM data to host drive on Windows 7

  - by malcolms

  Hi, I have created a VM for Virtual PC in windows 7. I am writing a batch file to backup data in the VM to a host USB drive. I have shared the host drives. I have a USB drive that I want to backup to. But how do refer to the USB drive in the batch file. I cannot seem to map a drive to it, It is called "H on Malcolm-Desktop" in windows explorer. This is what I have tried. XCOPY C:\Inetpub\wwwroot "\\H on Malcolm-Desktop\HALII_VHD_Backup\DataBackup\Inetpub\wwwroot" /S /E /Y /D How do I write this command? Malcolm

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >