Search Results

Search found 2482 results on 100 pages for 'hp officejet'.

Page 18/100 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • HP openview servicedesk: looking for api information ?

    - by Zagorulkin Dmitry
    Good day folks. I am very confused in this situation. I need to implement system which will be based on HP open view service desk 4.5 api. But this system are reached the end of supporting period. On oficial site no information available I am looking an information about this API(articles, samples etc). Now i have only web-api.jar and javadoc. Methods in javadoc is bad documented. If you have any info, please share it with me. Thanks. Second question: there are methods for api(with huge amount of methods) understanding if it not documented or information is not available? PS:If it question is not belong here i will delete it.

    Read the article

  • Wifi function key not working on HP laptop

    - by lopsided98
    I have an HP Pavilion g7-1260 with Ubuntu 13.10 on it. I would like to be able to use the wifi toggle key on the keyboard to enable and disable wifi. My wifi works fine and the light on the key turns on when I enable wifi through the Ubuntu networking menu. The problem is that pressing the key does not do anything. It should be activated when I press fn + f12. I tried using xev to see if an event was generated but there wasn't one. I also tried the same thing with apci_listen but it didn't output anything. Does anyone know how to get the key to work?

    Read the article

  • HP 510 laptop doesn't suspend when I close the lid

    - by Yuri
    I have an HP 510 laptop with Ubuntu 12.04. I have all the correct settings for suspending when the lid is closed, as far as I can tell, so I think it's a problem with detecting the event. The way it "should" be detected, from what I can see, is a little hardware switch that is pushed when the lid closes. This switch manually puts off the backlight, and sends the suspend signal. All I can think is that the signal isn't being properly interpreted. Can anyone suggest a fix? Update: I tested whether the button was actually working based on the suggestion by josinalvo, and I found that in the directory /proc/acpi/button/lid/ there is no LID directory. There is, however, a C1CF folder, and in it is a state file. When using the this file instead of ID, I discovered that, no, when I close the lid, the state does not change.

    Read the article

  • Can't install Ubuntu in a HP DV6 Laptop

    - by EApubs
    I just bought an HP DV6 6011tx (link) Laptop... I formated the disk through Windows and prepared for installing Ubuntu... When I insert the live CD, it shows the ubuntu start screen and then everything goes black (no cursor... Just like the screen is switched off (but the system is working)) When i try to install from the USB, it says Live media is not found! Some times it also give a black screen like the CD... Have any idea how to fix this? Thanks

    Read the article

  • Broadcom 4313 Signal strength very low on an HP Pavilion dv4

    - by thegreyspot
    I have a HP pavilion dv4 4141US laptop running fresh ubuntu 11.10. This laptop has a broadcom 4313gn chipset for the network card. The network card is using the brcmsmac driver. Which, I heard else where on askUbuntu that its the best driver to be using for this card. I can connect to my network, however I have extremely low network signal. Right now I am right in front of the router, and I only get 72%. If i go to the room directly behind the router's wall, i get no signal, where as with windows 7 I get a nice 70% percent. UPDATE: I use WEP at home and an open wireless connection at work. Both have same result. Both are completely different routers. Also you G What can i do?

    Read the article

  • 12.04 Install on a HP dv9000 screen problem

    - by Tim Kounadis
    Installed 12.04 on a HP dv9000 laptop. First tried to install with a Windows partition; then tried to install and move files from windows but not have a dual boot; then tried to install and have 12.04 have the system all to itself. The install was done off a burned CD... All went well. On reboot - it takes a while to come up the user ID and password challenge. After providing input screen renders and then turns black... First time Ubuntu user/installer - not technical :-)... Thanks for any help... I'll keepon digging in parallel.

    Read the article

  • HP lance de nouveaux services de support pour optimiser les applications sur serveurs x86, meilleures performances et faibles coûts

    HP lance de nouveaux services de support afin d'optimiser les applications critiques sur serveurs HP x86 : HP Critical Advantage ; pour de meilleures performances et des coûts réduits HP annonce aujourd'hui un nouveau service pour son portfolio Mission Critical (son haut de gamme des solutions de support) : le HP Critical Advantage. Son but ? "Aider à gérer la complexité des matériels et logiciels des infrastructures de dernière génération, afin que les promesses des nouvelles technologies soient tenues". Cette solution se focalise sur les environnements hautement virtualisés sur x86, et elle permet de s'appuyer sur "les experts" des centres de support HP partout dans le monde (qui ont une vision ...

    Read the article

  • Replace Android on HP Slate 21?

    - by user288626
    I want to replace Android with Ubuntu for Androids on my new HP Slate 21. As far as I known none has ever tried it yet and I would appreciate if Ask Ubuntu would help out here. Would I need to unlock & root first my machine? (In which case I will need a second machine plugged to my Slate...) Or can I just insert the bootable usb with the distribution I need and go from there as in a normal non-optical drive situation? Also where can I find the downloadable file/image of Ubuntu for Android as describe here? I see no link with the name on it.. Should I just download the normal dis and choose from options when installing it?

    Read the article

  • HP Bluetooth Mouse Connection Problems

    - by Arthur Upfield
    About a month ago, I turned on my laptop (Ubuntu 14.04 and Windows 8.1 dual boot, though the mouse works fine in Windows), logged in and connected my HP x4000b mouse via a bluetooth dongle (Kinivo BTD-400), and noticed that the battery indicator in Ubuntu said that the mouse battery was at 0%. The day before it was around 30%, so I decided to just change the batteries in the mouse, but after reconnecting with the new batteries, it still said 0%. The mouse connected and worked just fine, so I didn't think much of it. About a week after that, I noticed that my mouse would sometimes disconnect if I didn't use it, but since reconnecting isn't that hard I just decided to leave it. Now it also won't reconnect unless I log out and back in again, which is getting sort of tedious. Is there any way to fix this issue? Any help is appreciated, and I will try and respond to questions ASAP. Thanks.

    Read the article

  • HP Envy - HDMI / Mini-display-port not working

    - by Castanho
    I saw that many of HP envy users (and some other hardwares) are having problems while using Ubuntu (some other distributions too). PROBLEM My main issue is make my HDMI or Mini-display-port work on Linux (Ubuntu). I`m able to make it work smoothly on windows only :( TIP Some guy create a blog, that is very nice and I could found some helps over there. But is kind of abandoned. General Purpose The idea of this post is to put together all users and share though under this issue. Thanks in advance for any reply/comment. UPDATE1: Looking THIS comment I could start to see something at the end of the road! I will wait for some reply on this. If I have more news I`ll update this post!

    Read the article

  • HP mini 210 touchpad issues

    - by user4041
    Need help in getting the right mouse click to work on a HP mini 210-1015TU when using the touchpad. If I plug in a USB mouse, both left click and right click function as normal. Using the touchpad however I can only get the left click to work. Attempting to right click gives the result expected from a left click. As per some comments on a forum I added a file 11-touchpad.conf to /usr/share/X11/xorg.conf.d. I can provide further details if required. This made touchpad operation noticeably smoother but the problem with the right mouse click remains. Not a hardware problem as right clicked worked with 10.04 and still works with Windows 7 starter. 10.10 installed using wubi.

    Read the article

  • Installing Ubuntu 11.10 on HP Envy 15 - Partition Problems

    - by imparator
    I am trying to install Ubuntu 11.10 on my HP ENVY 15, however I am getting some problems. When I come to the partitioning section of the installation I am given my 4 partitions that I have. I change the partition of my 450 gb to 420 gb, so that I can use that 30gb space that I free up to install Ubuntu on it. After I do this step, instead of seeing the keyword to the 30gb I see unusable. I have read that there can not be more than 4 partitions somewhere for a UBUNTU installation, but that is not true, because I just installed Ubuntu 11.10 on my Lenovo which has the same amount of partitions as my ENVY ( I do get problems on my lenovo with installing ATI drivers but that is a completely different story). Does anybody have an idea of why I am getting an unusable notification next to my freed up space?

    Read the article

  • On my computer, will Ubuntu be faster then XP? [closed]

    - by pgrytdal
    I was recently given a HP Compaq presario SR1200NX. It has Windows XP installed on it. After having Windows 7, then Ubuntu, I find XP to be really slow. I was wondering if XP is slow? The processor itself is slow? Or a combination thereof? Specs can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00245801&cc=ca&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0002

    Read the article

  • Windows 7 Busy Icon won't stop spinning

    - by Lynda
    In windows 7 you have the busy icon that is a little blue wheel spinning beside the cursor when it is doing something. It has started to spin for about a second every 3-5 seconds. There is noting running that I can tell on the computer to cause the busy icon. It gets very annoying and I am not sure what to do to get it to stop. Ideas? Running a CPU Usage Gadget says I have less than 5% of the CPU being use and I have over 6GB of RAM free. (I have 8GB total) I am running a 3.6 GHZ AMD FX 4100 processor. EDIT- What I am actually seeing is the working in background pointer (the pointer is still visible beside the busy icon). EDIT 2 - After realizing this happened with the printer installation I turned on the the printer and the busy icon stopped. The printer is setup wirelessly. How do I stop Windows from (I guess) checking for the printer? That is what I assume it is doing. I am using a HP Officejet 8600

    Read the article

  • Broadcom 4312 wireless not working on an HP dv6-1245 DX

    - by vitalie
    I have installed Ubuntu 10.04 on my HP dv6-1245 dx notebook and I do not have any wifi (it worked perfectly in windows vista and 7). I have followed a lot of instructions found on net but still not able to get Internet. Here is the outcome of lspci: $ sudo lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) I have used ndiswrapper and have installed it, as well as the windows drivers for Broadcom, no change.

    Read the article

  • Synaptics error "no touchpad found" at startup on HP laptop

    - by Sandra
    I know there are a lot of topics on the synaptics touchpad not working, but I can't seem to find the answer to my problem anywhere. Please forgive me if I missed it. Here is what happened. After using the "ambient light" F11 key on my HP laptop (Compaq nc8430), the touchpad was disabled and I couldn't get it to work. Then I found this thread : "Synaptic touchpad on laptop not working". And Salem's answer totally solved my problem, both for the session fix and for the permanent fix. But since then, after each reboot I get the same error pop-up, with the following content: No touchpad found. No touchpad was found in this system. If the system has a touchpad, please make sure that the synaptics driver is properly installed and configured. If your touchpad is not found, though the driver is installed and configured correctly, please compile detailed information about your touchpad hardware and report this issue to the issue tracker. Needless to say, the driver is indeed installed, activated and configured (even though it's kind of useless now, since I guess the .conf file I created is doing all the work). I know it's a minor issue, because the touchpad does work properly, but it's getting really annoying... So, could anyone please help me fix this error pop-up problem ? Thank you !

    Read the article

  • Wireless not detected on an hp Pavilion g6 - RT5390PCIe

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • Wireless not detected on an hp Pavilion g6

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • HP Notebook Pavilion g6-2101sl freeze

    - by StErMi
    I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

    Read the article

  • Fan always on and overheating problems on HP G62

    - by Dave
    I have a HP G62 with i5 processor, 4G Ram and ATI HD 5470. Started using Ubuntu 4 months ago, first was 11.10 and after 12.04. Everything worked perfectly until some weeks ago when my cpu fan became "crazy" and I mean by this always on, noise and overheating problems, for sure if I put a glass with water in some minutes will boil (and I mean it). There can be a bug in the last kernel or any other Ubuntu's official update? And by the way CPU fan is cleaned like a new born baby; Used jupiter and all those stuff (lm-sensor, psensor...) - same problem; Don't ask me to install ATI drivers because will work like sh#t (interface laggy as HD 5470 isn't supported by Ubuntu) and I can't even open ATI Catalyst (error when I try to open it), more than this I always used open source drivers and as I said, worked perfectly (3d, effects). Right now I'm back to Windows and everything is working perfectly but my main problem is that I get used with Ubuntu and kinda weird to use windows again. I want back my nice and almost perfect Ubuntu. Thanks, Dave

    Read the article

  • Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

    - by Schof
    This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

    Read the article

  • Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

    - by JamesG
    I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

    Read the article

  • how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

    - by user211487
    When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

    Read the article

  • Display Driver Issue on an hp TX2-1160ea Notebook

    - by Sam
    I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >