Search Results

Search found 2482 results on 100 pages for 'hp officejet'.

Page 21/100 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • HP DL360 G4 screen resolution problem

    - by dogmatic69
    I just bought an old blade server to mess about with at home and cant get the thing to work. I have run the installer 11.10 x64 server and that was fine. After installing and rebooting, POST is fine but when grub kicks in the screen shows a popup type box complaining that it cant use the resolution. I have tried different screens and its always the same. I can reboot and go back into the installer and the screen is fine. I tried to follow some guides on-line about changing the resolution but I cant get a terminal. I found one in the installer but that is using the ram as /. the installer says 'the drive is mounted as "/target"' but I don't see that, nor /mnt/target. Could anyone help me configure this and get it running. Thanks.

    Read the article

  • HP mini 5102 Ethernet does not work after suspend on Lubuntu 12.10

    - by Marcin
    Ethernet works fine after system is rebooted The onboard card is seen in 'lspci' as: 43:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11) After system being suspended the sky2 driver loads but does not enable the NIC. I have noticed that it happens when PC is left suspended for longer period of time (few houres) Trying to reproduce it I have tried to load the sky2 driver with 'modprobe sky2'. Unfortunately typing 'ifconfig -a' for the onboard ethernet adapter does not list the driver once the sky2 driver is loaded. I have searched internet and I found some information about a bug in kernel. Hovewer it was reported in 2010 so I hope it has been fixed. Here it is http://lists.opensuse.org/opensuse-bugs/2010-02/msg01473.html

    Read the article

  • HP 655 Notebook (Ubuntu 12.04) wireless internet disabled after running updates

    - by Bastian
    Today the update-manaeger suggested that I should download some updates. So I did. After the updates were installed I had to reboot the system. After the reboot my notebook doesn't see any wireless networks. I was looking for a long time on the internet for answers but non of them applies to my case. I have the idea, it has got something to do with the kernel I am currently using (Linux 3.2.0-55). Is this one new for Ubuntu 12.04? When I boot my system I can choose to use an older kernel (linux 3.2.0-32). When I use this one the notebook does see the wireless networks. This is my network card according to the command lspci: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Anyone an idea to fix my problems with wireless internet?

    Read the article

  • Installing 10.04 server on HP xw9400 Workstation with RAID 5

    - by Dave Long
    I have a workstation that was given to me that is a friggen powerhouse, so I figured I would set it up as my development and demo server. This is my first experience installing Ubuntu onto a RAID array and so far it has not been a fun one. I have been following the Advanced Installation guide for installing Ubuntu 10.04 server, and it says that there will be an option on the Partition Disks screen to manually create the partitions, but the only options I have are: Configure iSCSI volumes Undo changes to partitions Finish partitioning and write changes to disk Just before I got to that screen I got a message that said: One or more drives containing Serial ATA RAID configurations have been found. Do you wish to activate these RAID devices? It doesn't matter whether I answer yes or no to that, I still get the same Partition Disks screen. When I try to select Finish partitioning and write changes to disk I just get the No root file system error. Has anyone else experienced this, and how do I get past it? Can I not run Ubuntu on this machine?

    Read the article

  • HP 4510s Probook Overheating

    - by Ivan
    I am having overheating problems with Ubuntu 12.04. Average temperature is approximately 70-74 °C and when Skype is turned on it goes nuts over 80 °C. Elipse refuses to open for some reason and of course everything is slower than it should be. I also had Linux Mint 11 installed and same thing happened. Strange thing is when running Windows, everything is okay and temperature is normal. Of course I have googled this issue and found some advices like install Jupiter which helped just a bit, installed additional drivers, opened laptop and cleaned it completely, disabled fan always on option from Bios. I have also switched from Unity to classic old look and still temperature is the same. Somehow I think it has something to do with the graphics card but I am all lost now. Any advices? Thank you!

    Read the article

  • SQL Server 2008 SP3 and HP Database Enterprise Appliance

    The list of updated features begins with an overall improved upgrading experience from SQL Server's older versions to the latest SQL Server 2008 SP3 edition. Microsoft has implemented measures that provide enhanced performance and reliability while making the upgrade as well. Logs in SQL Server Integration Services will display the aggregate number of rows transmitted in Data Flows, and enabling the Shrink Database option will produce enhanced warning messages when maintenance plan development takes place. Microsoft's blog post continues with the list of SP3 upgrades, noting that users sho...

    Read the article

  • HP Pavilion G6 1209 temperature higher than usual and fan working in 11.10

    - by vanjadjurdjevic
    Installing Ubuntu on this new machine i had various problems, so I asked around ask ubuntu for a solution. This is the latest one! :D When I start the pc it shows the temperature around 50-55. When I open chromium it shows 60+ (61,62,63). It even gets to 67-68 when multi-tasking 2 apps. The fan is working slightly louder than in windows 7. Talking about windows 7, the temperature is 45-50 when idle, 50-53 when working in browser. Im already loosing it with this machine. You can find specs here It says 'technishe daten' below the picture. Click that tab and you will reach the specs.

    Read the article

  • HP 655 notebook (ubuntu 12.04) keeps consuming energy after closing the lid

    - by Bastian van Binsbergen
    I am unable to change power settings so that when I close the lid the battery stops consuming energy. There are three options in the power settings menu: When the screen is closed: 1 Do nothing 2 Pause 3 Sleep First I could not change anything. I see all the options but I could not click on option 2 and 3. (grey text instead of black) I already made it possible to put in to sleep mode. But I can't pause (suspend) the laptop. Anyone an idea?

    Read the article

  • 11.04 Wireless is disabled by hardware switch Hp Compaq nc6220

    - by user75711
    Here is some backstory if it is helpful: I had Windows Vista on my computer and I wanted to use wubi to install Ubuntu, everything was fine until I booted into the OS. It said my wireless was disabled by a Hardware Switch. So I booted back into Vista and it disabled there too. I have gotten rid of vista and installed 11.04 instead. It still has this error and as far as I know there is no switch anywhere and the fn keys do nothing. My lshw is: *-network DISABLED description: Wireless Interface product: PRO/Wireless 2915ABG [Calexico2] Network Connection vendor: Intel Corporation physical id: 4 bus info: pci@0000:02:04.0 logical name: eth1 version: 05 serial: 00:15:00:0c:5d:62 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver-ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.5.27 (Dec 12 2007) latency=64 link=no maxlatency=24 mingnt=3 multicast=yes wireless=IEEE 802.11abg resources: irq:21 memory:d0400000-d0400fff Thanks

    Read the article

  • Cannot load a webpage with hp pavilion dv2000 laptop

    - by Andre'
    I am using an Ubuntu 12.04 cd to test out the os before I take the plunge, and I can't get webpages to load in the firefox application. When I look at the wireless settings, ubuntu says that my computer is connected to my home wireless network, but I am repeatedly prompted to enter my password (it keeps telling me that authentication is required by my wireless network). After a few rounds of this, Ubuntu seems to give up and tells me that wireless network is disconnected. Furthermore (I'm currently in ubuntu using a wired connection if it has anything to do with this), the wireless connection will randomly attempt to establish itself. I've entered rfkill list and all of the wireless devices therein say "no" - they're not blocked. I can connect to the network in Windows 7, so I don't think my network is the problem. Any suggestions?

    Read the article

  • Screen Brightness Stuck on high on an HP dv7t laptop

    - by theJollySin
    I have an otherwise fully-functioning install of Ubuntu 12.04 on my HPdv7t laptop. When I press the 'brightness buttons' on the keyboard the associated images appear on my screen to say I am increasing/decreasing the screen brightness. When I go into "System Settings" I can move the 'brightness slider bar' up and down. But none of that changes the fact that my screen is stuck on the highest brightness setting. ANY clues on how to fix this would be greatly appreciated. This giant 17-inch monitor is blinding, and this is making it hard to code for any length of time.

    Read the article

  • HP Slate with Windows 7: Dead or Alive?

    There is speculation lately regarding Hewlett Packard s Slate device. The speculation centers around whether or not the device will come equipped with Windows 7 as its operating system.... Transportation Design - AutoCAD Civil 3D Design Road Projects 75% Faster with Automatic Documentation Updates!

    Read the article

  • HP ProCurve & Cisco switches interoperability

    - by Kamil Z
    I have a couple of questions regarding Cisco and HP ProCurve interoperability. Here's a link to pdf with my network topology. Can someone help me with basic VLAN configuration in such topology? Below there are some details of my configuration: # m_management_2 interface FastEthernet0/43 switchport access vlan 250 switchport mode access spanning-tree port-priority 32 spanning-tree cost 100 # MTA2-swmgmt1 vlan 1 name "DEFAULT_VLAN" untagged 1-48 ip address 10.10.249.190 255.255.255.128 exit # MTA2-swtr1 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.188 255.255.255.128 exit # MTA2-swtr2 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.189 255.255.255.128 exit I don't post MTA2-bcsw[12] configuration, because I wasn's successfull in this one yet. Every time I configure VLANs on MTA2-bcsw[12] Fa0/24 interface on m_management_2 goes down bacause of receiving tagged BPDUs on access port (there are no VLANs configured on MTA2-swmgmt1 because of fact that only 250 VLAN is allowed in this switch. Is it correct?). Can someone provide me some basic configuration for this topology? Second thing I want to ask is concept of connection from MTA2-swmgmt1 to MTA2-swtr[12] HP switches for the sake of management. How to configure such ports on HP switches (managed switch and manager switch). Is my actual configuration correct?

    Read the article

  • Symbolic link modification for HP unix

    - by kalpesh
    Hi David Zaslavsky, Recently i was working on modifying the Symbolic links ... for a particular files.. while searching on internet i saw your post ... I am trying to use this script which you had posted .. find /home/user/public_html/qa/ -type l \ -lname '/home/user/public_html/dev/*' -printf \ 'ln -nsf $(readlink %p|sed s/dev/qa/) $(echo %p|sed s/dev/qa/)\n'\ script.sh SO i tried to modify your script for my problem .. in Hp unix env.. but it seems that the -lname command does not works for HP unix. do you know something equivalent that i can use ... Just to give you and idea of my problem ... I want to change all the symbolic links inside a particular folder .. New Symbolic link -- /base/testusr/scripts Old Symbolic link -- /base/produsr/scripts Now folder "A" contains more than 100 different files having soft links which points to this path -- /base/produsr/scripts But what I want is that the files inside folder A to point to this soft link --/base/testusr/scripts I am trying to achieve in Hp unix ... would really appreciate your help on this ...

    Read the article

  • Recovery disk Windows 8 HP Pavilion g6

    - by fpghost
    I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

    Read the article

  • Dual monitors won't accept new settings

    - by mschulze
    I'm trying to use dual monitors but every time I try to change the display settings(external monitor is on the right of the laptop, not the left etc...) my screens go black, then my laptop screen will come back "normally" but my external monitor will just flash different shades of red or black. I cannot interact with anything on my laptop screen even though I can move my mouse around. Even when the monitors attempt to revert back the external monitor continues to flicker instead of reverting. The only way to stop it is to hard-boot but the new settings aren't saved. Also, when the dual monitors are both working my laptop screen has two vertical black bars along its sides. It's like Natty just decided I couldn't use the outer inch and a half of my laptop screen. My external monitor doesn't have this problem, and my laptop uses its full screen size when the external monitor is not hooked up. Does anyone know what I'm doing wrong? I have an HP Pavillion dv7 and an HP w2338h external monitor. Thanks!

    Read the article

  • Problems with Ubuntu and AMD A10-4655M APU

    - by Robert Hanks
    I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >