Search Results

Search found 9980 results on 400 pages for 'kernel extension'.

Page 18/400 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Kernel panic while loading Mac OS X on VMWare

    - by Vladimir Gritsenko
    I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

    Read the article

  • FreeBSD 8 Kernel Configuration Error Using the VESA Option

    - by gvkv
    I'm trying to reconfigure FreeBSD 8 (amd64) to allow for a high resolution terminal by following these instructions. The problem is that when I add the two lines: options VESA options SC_PIXEL_MODE and try to build: make buildkernel KERNCONF=VESAKERN I get the following error: /usr/src/sys/amd64/conf/VESAKERN: unknown option "VESA" and I have no idea why.

    Read the article

  • Linux Kernel Messages: ata1.00: status: { DRDY ERR }

    - by PM
    I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

    Read the article

  • After installing Apache, PHP and MySQL I can't add extension to php.ini without Apache error

    - by Evgeni
    Hello! I have Windows XP OS. Installed Apache 2.2.14, then PHP 5.2.12 (tested with phpinfo.php - IT'S WORKS!) Then I installed MySQL 5.1. And now, when I add extension = php_mysql.dll to php.ini and restart server, Apache tells me that he can't start (small window with "The requested operation has failed"). Even if I add only extension = *smth*.dll --- the same thing. Apache just don't love my extensions. How to prove him, that they are cool and stuff? Thanks.

    Read the article

  • Kernel Panic - Not Syncing: Fatal exception

    - by user3513346
    Server (HP Proliant D320e G8 v2) froze at this screen during boot today (running CentOS 6.5): I was able to get the server to boot after a 'press and hold'. I've been having many problems with the server lately - mainly related to the iLO and being unable to install CentOS 7. Could someone please help me decode this screen? Does it suggest there could be a serious problem? Or does this just happen sometimes? It is possible that the OS wasn't 'shutdown' properly before the failed boot.

    Read the article

  • Kernel panic while loading Mac OS X on VMWare

    - by Vladimir Gritsenko
    I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

    Read the article

  • After installing Apache, PHP and MySQL I can't add extension to php.ini without Apache error

    - by Evgeni
    I have Windows XP OS. Installed Apache 2.2.14, then PHP 5.2.12 (tested with phpinfo.php - IT'S WORKS!) Then I installed MySQL 5.1. And now, when I add extension = php_mysql.dll to php.ini and restart server, Apache tells me that he can't start (small window with "The requested operation has failed"). Even if I add only extension = *smth*.dll --- the same thing. Apache just don't love my extensions. How to prove him, that they are cool and stuff? Thanks.

    Read the article

  • Kernel config file generator

    - by lisak
    Hey guys, could please anybody recommend some kind of kconfig generator that would trim modules and built-in stuff that is not needed according to current hardware ? The best I have found is this : http://lkml.org/lkml/2008/9/16/290 I don't care about compilation time and the amount of modules that are not built-in. I'm concerned about performance. I don't know how much memory and runtime is wasted on huge kernels with almost everything possible. I'm a java developer and I don't know what most of the modules and drivers are for. So there is not much I can disable and be sure that I don't screw it up. Thanks in advance

    Read the article

  • ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

    - by frank
    Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

    Read the article

  • Magic key in Linux Kernel

    - by Masi
    What is the purpose of the following command? sudo echo t > /proc/sysrq-trigger I run it, but I can see no difference in the magic key and its output at dmesg. Trigger suggests me that the databases of sysrq are involved in the process.

    Read the article

  • mod_rewrite only one extension

    - by Matthias Reisner
    Currently I'm having the following htaccess content: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^(.*).html$ $1.php </IfModule> I want to change the php extension to html. Now if I browse for localhost/xx.html I get the right content. BUT I also can use xx.php or xx to access the oontent! I only want to get the content if there is an html extension! How can I make this work??? Example: On the server I have the file foo.php. Now I want the user to type in foo.html in the browser to get the content of foo.php. But if he types foo.php there will be an error. I already tried this RewriteRule ^(.*)[^\.html]$ error.php RewriteRule ^(.*)\.html$ $1.php But that does not really work Thanks!

    Read the article

  • Kernel Compiling from Vanilla to several machines

    - by Linux Pwns Mac
    When compiling kernels for machines is there a safe or correct way to create a template for say servers? I work with a lot of RHEL servers and want to compile them with GRSEC. However, I do not wish to always rebuild off of the .config for each machine and go in and remove a bunch of unrelated modules like wireless, bluetooth, ect... which you typically do not need in servers. I want to create a template .config that can be used on any machine, but is there a safe way to do that when hardware changes? I know with Linux, at least from my experience, you can cross jump hardware way easier then Windows/OSX. I assume that as long as I leave MOST of all the main hardware modules/CPU in that this could create a .config that would work for all or just about any machine?

    Read the article

  • Update linux kernel image, How can I do it in safe? (how to revert)?

    - by Kit Ho
    based on this post , i am trying to update my kernel from 2.6.32 to 2.6.35 as my intel video card doesn't work. However, I am very afraid that my update would cause my computer crash and lost all the thing.(does not function , esp for video) I am using ubuntu 10.04, currently version is 2.6.32-40-generic. Does anyone try to update to 2.6.35-32??? If in case it make crash? how can i revert back to 2.6.32??? Thanks Kit

    Read the article

  • Notifying iFrame page from Firefox extension?

    - by Crashalot
    I'm writing a Firefox extension and need to notify an iFrame page of certain events. The iFrame page is contained within a sidebar created by the extension, and this iFrame page is controlled by me. When I load the iFrame page, the extension code needs to send a notification and trigger something to happen within the iFrame page. To accomplish this, I'm creating an event from the extension Javascript and firing the event, which the iFrame page is listening to. Unfortunately, when invoking document.createEvent(), this error pops up (copied, with the quotes, straight out of Firebug): Operation is not supported" code: "9 Any clues on the error, or suggestions on how to trigger something in an iFrame page from the extension Javascript? Thanks!

    Read the article

  • Maximum Possible File Name Length in Windows Kernel

    - by Lambert
    I was wondering, what is the longest possible name length allowed by the Windows kernel? E.g.: I know the kernel uses UNICODE_STRING structures to hold all object paths, and since the byte length of a wide-character string is stored inside a USHORT, that allows for a maximum path length of 2^15 - 1 characters. Is there a similar, hard restriction on a file name (rather than path)? (I don't care if NTFS or FAT32 imposes a particular restriction; I'm looking for the longest possible theoretically allowed name in the kernel, assuming no additional file system or shell restrictions.) (Edit: For those wondering why this even matters, consider that normally, traversing a directory is achieved by FindFirstFile/FindNextFile calls, one call per file. Given the function named NtQueryDirectoryFile, which is the underlying system call and which returns multiple file names per call, it's actually possible to take advantage of this maximum-length restriction on the path to make an extremely-fast directory traverser that uses solely the stack as a buffer. Now I'm trying to extend that concept, and I need to know the maximum size of a file name.)

    Read the article

  • Memory leak in chrome.extension.sendRequest()

    - by jprim
    Chrome Version : 9.0.597.19 (Build 68937) beta & current stable I have simplified my code as far as possible. I ended up with the attached extension: content.js (content script run on every site): setInterval(function() { chrome.extension.sendRequest({ }, function(response) { //Do nothing }); }, 1); background.js (background page script): chrome.extension.onRequest.addListener(function(request, sender, sendResponse) { sendResponse({ }); }); When you install this extension, you can observe it eating up memory extremely fast (I got 90MB in 1 min with 9 tabs opened). You can speed up the process by opening more tabs. Of course, the extension I am actually developing does not send requests every millisecond, but only every 3 seconds. This just slows it down, though. A user who has run it in the background for a long time with many tabs opened has reported 100MB of memory usage, and I can reproduce it to a less extreme extent, too.

    Read the article

  • 2.6.9 Kernel on virtual server (non upgradable) - any expected problems?

    - by chris_l
    Hi, I'm considering to rent a virtual server (for me personally). The product I'm currently looking at offers IMO fair pricing, very good hardware etc. The only problem is, that I won't be able to do an upgrade to a newer kernel than 2.6.9 (running Debian Etch). Also, I can't install my own kernel modules. (The server runs with Virtuozzo, so as far as I understand it, it just does some chroot instead of a real virtualization (?)) I want to run GlassFish, Postgres, Subversion, Trac and maybe some other things on it. It will also have to employ a firewall, and provide OpenSSL for https. Ideally, it would also be able to do AIO (asynchronous IO), which could speed up some server I/O. Should I expect problems with that old kernel version, in conjunction with the software I want to install (I'd like to use current versions of the software)? One thing I already found out, is that you can't do everything with iptables, since some kernel modules are missing/things are not build into the kernel. GlassFish v3 appears to run fine at first glance. I was able to test the server for a few hours. Installing my whole setup wasn't feasible in that time, but what I can say is, that it's amazingly fast for an entry-level vserver, especially hard disk and network performance (averaging at ca. 400MBit/s). So if the kernel won't be a problem, I'd really like to take it. Thanks, Chris PS Exact kernel version: 2.6.9-023stab051.3-smp

    Read the article

  • Linux Kernel crash mutex_lock_slowpath "blocked for more than 120 seconds". What to do?

    - by Roddick
    I have out-of-the box Debian Lenny with non-custom kernel 2.6.26-2-amd64. Brand new server that is used to 5% of it's potential, CPU and Disk-wise. Meaning it probably not crashing because of overload. every few days it freezes with hundreds of these messages in console log: : [284847.828428] INFO: task apache2:12473 blocked for more than 120 seconds. : [284847.868468] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. : [284847.912759] apache2 D ffff8101bc6b7ab0 0 12473 14358 : [284847.912763] ffff810160d5bc50 0000000000000082 ffff8101c0002e40 0000000000000000 : [284847.912766] ffff8101a7c42950 ffff810327d92810 ffff8101a7c42bd8 0000000400000044 : [284847.912770] ffff8101c0002e40 00000000000612d0 0000000000000000 00000040000612d0 : [284847.912773] Call Trace: : [284847.912786] [<ffffffff80429b0d>] __mutex_lock_slowpath+0x64/0x9b : [284847.912790] [<ffffffff80429972>] mutex_lock+0xa/0xb : [284847.912794] [<ffffffff802a20b9>] do_lookup+0x82/0x1c1 : [284847.912800] [<ffffffff802a4271>] __link_path_walk+0x87a/0xd19 : [284847.912805] [<ffffffff80295844>] kmem_getpages+0x96/0x15f : [284847.912808] [<ffffffff80295fb7>] ____cache_alloc_node+0x6d/0x106 : [284847.912814] [<ffffffff802a4756>] path_walk+0x46/0x8b : [284847.912819] [<ffffffff802a4a82>] do_path_lookup+0x158/0x1cf : [284847.912822] [<ffffffff802a3879>] getname+0x140/0x1a7 : [284847.912827] [<ffffffff802a53f1>] __user_walk_fd+0x37/0x4c : [284847.912831] [<ffffffff8029e381>] vfs_lstat_fd+0x18/0x47 : [284847.912840] [<ffffffff8029e3c9>] sys_newlstat+0x19/0x31 : [284847.912848] [<ffffffff8020beda>] system_call_after_swapgs+0x8a/0x8f Almost all traces has __mutex_lock_slowpath as top-level. Only some has different trace: : [284847.737386] INFO: task apache2:12472 blocked for more than 120 seconds. : [284847.777551] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. : [284847.824881] apache2 D ffff8101bc6b7ab0 0 12472 14358 : [284847.824886] ffff8101b9cc1c50 0000000000000086 ffffffffa0131e0a 0000000000000002 : [284847.824889] ffff8102e7454300 ffff810324c6cad0 ffff8102e7454588 0000000000000000 : [284847.824893] 0000000000000001 0000000000000296 0000000000000003 ffff8101b9cc1c58 : [284847.824896] Call Trace: : [284847.828403] [<ffffffffa0131e0a>] :ext3:__ext3_journal_dirty_metadata+0x1e/0x46 : [284847.828412] [<ffffffff80429b0d>] __mutex_lock_slowpath+0x64/0x9b : [284847.828418] [<ffffffff80429972>] mutex_lock+0xa/0xb : [284847.828421] [<ffffffff802a20b9>] do_lookup+0x82/0x1c1 : [284847.828427] [<ffffffff802a4271>] __link_path_walk+0x87a/0xd19 : [284847.828428] [<ffffffff80271296>] find_lock_page+0x1f/0x8a : [284847.828428] [<ffffffff80273182>] filemap_fault+0x1c2/0x33c : [284847.828428] [<ffffffff802a4756>] path_walk+0x46/0x8b : [284847.828428] [<ffffffff802a4a82>] do_path_lookup+0x158/0x1cf : [284847.828428] [<ffffffff802a3879>] getname+0x140/0x1a7 : [284847.828428] [<ffffffff802a53f1>] __user_walk_fd+0x37/0x4c : [284847.828428] [<ffffffff8029e381>] vfs_lstat_fd+0x18/0x47 : [284847.828428] [<ffffffff8029e3c9>] sys_newlstat+0x19/0x31 : [284847.828428] [<ffffffff8020beda>] system_call_after_swapgs+0x8a/0x8f kernel: [1912668.466347] INFO: task apache2:17984 blocked for more than 120 seconds. [1912668.507035] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. : [1912668.555165] apache2 D ffff8101c5637ba0 0 17984 17282 : [1912668.596752] ffff810166a7dd30 0000000000000086 0000000000000000 ffff810166a7dcd8 : [1912668.643341] ffff8101c563c880 ffff81024505f000 0000000000000002 ffff810166a7dd68 : [1912668.699566] 0000000000000086 00000000000cb1a0 0000000000000000 ffff81017f344d60 : [1912668.744773] Call Trace: : [1912668.761754] [<ffffffff8022a3ed>] pick_next_task_fair+0x6e/0x7a : [1912668.829311] [<ffffffff802be0e2>] bio_alloc_bioset+0x89/0xd9 : [1912668.861930] [<ffffffff8024ac3a>] getnstimeofday+0x39/0x98 : [1912668.897005] [<ffffffff802710f6>] sync_page+0x0/0x41 : [1912668.927868] [<ffffffff80429487>] io_schedule+0x5c/0x9e : [1912668.960286] [<ffffffff80271132>] sync_page+0x3c/0x41 : [1912668.991756] [<ffffffff804295fa>] __wait_on_bit_lock+0x36/0x66 : [1912669.031757] [<ffffffff802710e3>] __lock_page+0x5e/0x64 : [1912669.064191] [<ffffffff802461d3>] wake_bit_function+0x0/0x23 : [1912669.100100] [<ffffffff80281bc5>] handle_mm_fault+0x5e4/0x8de : [1912669.134531] [<ffffffff802461a5>] autoremove_wake_function+0x0/0x2e : [1912669.174623] [<ffffffff802aa108>] fcntl_setlk+0x1cf/0x291 : [1912669.210623] [<ffffffff802461a5>] autoremove_wake_function+0x0/0x2e : [1912669.246923] [<ffffffff802a677f>] sys_fcntl+0x280/0x2f7 After googling for "mutex_lock_slowpath" I can only find the Kernel mailing list discussions that this issue was introduced in some commit. Wthout reference to verison. Discussions as recent as Jan 25, 2011. The Kernel I am using is form Debian Lenny, year ago. What should I do? Is this bug even fixed in kernel? if it's such obvious bug why it happens so rarely? Should I download latest kernel from kernel.org and upgrade? Should I use Debian backports to install new "Approved" kernel? Am I missing something? What to do?

    Read the article

  • Need complete picture of virtual adress space

    - by claws
    Hello, This image gives a good picture about Virtual Adress space. But it only says half of the story. It only gives complete picture of User Adress space ie.. lower 50% (or 75% in some cases). What about the rest 50% (or 25%) which is occupied by the kernel. I know kernel also has so many different things like kernel modules , device drivers, core kernel itself. There must be some kind of layout right? What is its layout? If you say its Operating System dependent. I would say, there are two major operating systems Windows & Linux. Please give answer for any one these.

    Read the article

  • Wrong perspective is showing in Eclipse plugin project [closed]

    - by Arun Kumar Choudhary
    I am working in Eclipse Modeling Framework (Eclipse plugin development) in my project the tool(project i am working) provides three perspectives. 1.Accelerator Analyst perspective 2.Contract Validation and 3.Underwriter rules Editor... By default it starts with Contract validation perspective (As we define it within the plugin_customization.ini). However after switching to other perspective does not change the perspective shown... As all perspective (Class, Id and Name) is define only inside Plugin.XML as it is the task of org.eclipse.ui.perspective that that perspective name should be come forefront. Out of 10 7 times it is working fine but I am not getting why this is not working in that 3 cases. I am pasting my plugin.XML file <?xml version="1.0" encoding="UTF-8"?> <?eclipse version="3.0"?> <plugin> <extension id="RuleEditor.application" name="Accelerator Tooling" point="org.eclipse.core.runtime.applications"> <application> <run class="com.csc.fs.underwriting.product.UnderWritingApplication"> </run> </application> </extension> <extension point="org.eclipse.ui.perspectives"> <perspective class="com.csc.fs.underwriting.product.ContractValidationPerspective" icon="icons/javadevhov_obj.gif" id="com.csc.fs.underwriting.product.ContractValidationPerspective" name="Contract Validation"> </perspective> </extension> <extension point="org.eclipse.ui.perspectives"> <perspective class="com.csc.fs.underwriting.product.UnderwritingPerspective" icon="icons/javadevhov_obj.gif" id="com.csc.fs.underwriting.product.UnderwritingPerspective" name="Underwriting"> </perspective> </extension> <extension id="product" point="org.eclipse.core.runtime.products"> <product application="com.csc.fs.nba.underwriting.application.RuleEditor.application" name="Rule Configurator Workbench" description="%AppName"> <property name="introTitle" value="Welcome to Accelerator Tooling"/> <property name="introVer" value="%version"/> <property name="introBrandingImage" value="product:csclogo.png"/> <property name="introBrandingImageText" value="CSC FSG"/> <property name="preferenceCustomization" value="plugin_customization.ini"/> <property name="appName" value="Rule Configurator Workbench"> </property> </product> </extension> <extension point="org.eclipse.ui.intro"> <intro class="org.eclipse.ui.intro.config.CustomizableIntroPart" icon="icons/Welcome.gif" id="com.csc.fs.nba.underwriting.intro"/> <introProductBinding introId="com.csc.fs.nba.underwriting.intro" productId="com.csc.fs.nba.underwriting.application.product"/> <intro class="org.eclipse.ui.intro.config.CustomizableIntroPart" id="com.csc.fs.nba.underwriting.application.intro"> </intro> <introProductBinding introId="com.csc.fs.nba.underwriting.application.intro" productId="com.csc.fs.nba.underwriting.application.product"> </introProductBinding> </extension> <extension name="Accelerator Tooling" point="org.eclipse.ui.intro.config"> <config content="$nl$/intro/introContent.xml" id="org.eclipse.platform.introConfig.mytest" introId="com.csc.fs.nba.underwriting.intro"> <presentation home-page-id="news"> <implementation kind="html" os="win32,linux,macosx" style="$nl$/intro/css/shared.css"/> </presentation> </config> <config content="introContent.xml" id="com.csc.fs.nba.underwriting.application.introConfigId" introId="com.csc.fs.nba.underwriting.application.intro"> <presentation home-page-id="root"> <implementation kind="html" os="win32,linux,macosx" style="content/shared.css"> </implementation> </presentation> </config> </extension> <extension point="org.eclipse.ui.intro.configExtension"> <theme default="true" id="org.eclipse.ui.intro.universal.circles" name="%theme.name.circles" path="$nl$/themes/circles" previewImage="themes/circles/preview.png"> <property name="introTitle" value="Accelerator Tooling"/> <property name="introVer" value="%version"/> </theme> </extension> <extension point="org.eclipse.ui.ide.resourceFilters"> <filter pattern="*.dependency" selected="true"/> <filter pattern="*.producteditor" selected="true"/> <filter pattern="*.av" selected="true"/> <filter pattern=".*" selected="true"/> </extension> <extension point="org.eclipse.ui.splashHandlers"> <splashHandler class="com.csc.fs.nba.underwriting.application.splashHandlers.InteractiveSplashHandler" id="com.csc.fs.nba.underwriting.application.splashHandlers.interactive"> </splashHandler> <splashHandler class="com.csc.fs.underwriting.application.splashHandlers.InteractiveSplashHandler" id="com.csc.fs.underwriting.application.splashHandlers.interactive"> </splashHandler> <splashHandlerProductBinding productId="com.csc.fs.nba.underwriting.application" splashId="com.csc.fs.underwriting.application.splashHandlers.interactive"> </splashHandlerProductBinding> </extension> <extension id="com.csc.fs.pa.security" point="com.csc.fs.pa.security.implementation.secure"> <securityImplementation class="com.csc.fs.pa.security.PASecurityImpl"> </securityImplementation> </extension> <extension id="productApplication.security.pep" name="com.csc.fs.pa.producteditor.application.security.pep" point="com.csc.fs.pa.security.implementation.authorize"> <authorizationManager class="com.csc.fs.pa.security.authorization.PAAuthorizationManager"> </authorizationManager> </extension> <extension point="org.eclipse.ui.editors"> <editor class="com.csc.fs.underwriting.product.editors.PDFViewer" extensions="pdf" icon="icons/pdficon_small.gif" id="com.csc.fs.pa.producteditor.application.editors.PDFViewer" name="PDF Viewer"> </editor> </extension> <extension point="org.eclipse.ui.views"> <category id="com.csc.fs.pa.application.viewCategory" name="%category"> </category> </extension> <extension point="org.eclipse.ui.newWizards"> <category id="com.csc.fs.pa.application.newWizardCategory" name="%category"> </category> <category id="com.csc.fs.pa.application.newWizardInitialize" name="%initialize" parentCategory="com.csc.fs.pa.application.newWizardCategory"> </category> </extension> <extension point="com.csc.fs.pa.common.usability.addNewCategory"> <addNewCategoryId id="com.csc.fs.pa.application.newWizardCategory"> </addNewCategoryId> </extension> <!--extension point="org.eclipse.ui.activities"> <activity description="View Code Generation Option" id="com.csc.fs.pa.producteditor.application.viewCodeGen" name="ViewCodeGen"> </activity> <activityPatternBinding activityId="com.csc.fs.pa.producteditor.application.viewCodeGen" pattern="com.csc.fs.pa.bpd.vpms.codegen/com.csc.fs.pa.bpd.vpms.codegen.bpdCodeGenActionId"> </activityPatternBinding> Add New Product Definition Extension </extension--> </plugin> class="com.csc.fs.underwriting.product.editors.PDFViewer" extensions="pdf" icon="icons/pdficon_small.gif" id="com.csc.fs.pa.producteditor.application.editors.PDFViewer" name="PDF Viewer"> </editor> </extension> <extension point="org.eclipse.ui.views"> <category id="com.csc.fs.pa.application.viewCategory" name="%category"> </category> </extension> <extension point="org.eclipse.ui.newWizards"> <category id="com.csc.fs.pa.application.newWizardCategory" name="%category"> </category> <category id="com.csc.fs.pa.application.newWizardInitialize" name="%initialize" parentCategory="com.csc.fs.pa.application.newWizardCategory"> </category> </extension> <extension point="com.csc.fs.pa.common.usability.addNewCategory"> <addNewCategoryId id="com.csc.fs.pa.application.newWizardCategory"> </addNewCategoryId> </extension> <!--extension point="org.eclipse.ui.activities"> <activity description="View Code Generation Option" id="com.csc.fs.pa.producteditor.application.viewCodeGen" name="ViewCodeGen"> </activity> <activityPatternBinding activityId="com.csc.fs.pa.producteditor.application.viewCodeGen" pattern="com.csc.fs.pa.bpd.vpms.codegen/com.csc.fs.pa.bpd.vpms.codegen.bpdCodeGenActionId"> </activityPatternBinding> Add New Product Definition Extension </extension--> </plugin> Inside each class(the qualified classes in above xml) i did only hide and show the view according to perspective and that is working very fine.. Please provide any method that Eclipse provide so that I can override it in each classed so that it can work accordingly.

    Read the article

  • Graphical driver 13.10 ATI RV630

    - by Michael Cephalus
    I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

    Read the article

  • task blocked for more than

    - by Manuel Sopena Ballesteros
    I have a webserver with the configuration below: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system My issue is I am getting kernel panic quite frequently. These is a list of some processes blocked I could see from the console: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd this is my sar logs Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to fix it. dmesg does not show any relevant information. I don't see any bottleneck in sar, any idea what can I check next? thank you very much

    Read the article

  • Ubuntu hard disk problem

    - by Henadzy
    Hello! I have got the error with a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount and use filesystem which placed on this hard disk at other computer it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773890] ata3.00: cmd 60/18:10:9f:6b:ed/00:00:0e:00:00/40 tag 2 ncq 12288 in Apr 25 00:28:25 vare6gin kernel: [ 885.773893] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773900] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773904] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773918] ata3.00: cmd 60/08:18:3f:5f:ed/00:00:0e:00:00/40 tag 3 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773921] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773927] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773932] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773946] ata3.00: cmd 60/08:20:67:c8:91/00:00:05:00:00/40 tag 4 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773948] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773955] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773960] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >