Search Results

Search found 6730 results on 270 pages for 'loaded'.

Page 18/270 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • IIS 7 503 error, application pool stop crash, defdoc.dll could not be loaded due to a configuration

    - by optician
    Hi All, Currently trying to get iis 7 to work, but every time I request a page, the application pool goes into stopped status. In the event log this is what comes back. The Module DLL 'C:\Windows\System32\inetsrv\defdoc.dll' could not be loaded due to a configuration problem. The current configuration only supports loading images built for a x86 processor architecture. The data field contains the error number. I've already re installed iis, any other ideas, I read that someone fixed this by downloading the dll again, but this seems like an odd solution. Thanks. EDIT I have now replaced the file with one I downloaded off the internet, and now it says The Module DLL 'C:\Windows\System32\inetsrv\protsup.dll' could not be loaded due to a configuration problem. I hope I don't have to get 100's of these.

    Read the article

  • Do browsers allows pages loaded on one tab to access/intercept/inject data in other tabs?

    - by jairo
    I was surprised to hear from this Reuters video that it was possible for a page loaded on one tab to access and/or inject data onto another page loaded on a different tab. TL;DW (too lazy; didn't watch) The interviewee in the video suggests that when doing online banking, the user exit his browser (thus closing all windows) and start a new browser session with just your banking page/tab open. Allegedly, malicious sites can check if you have your banking site open and inject commands onto those sites. Can someone confirm and/or deny this claim? Is it only possible even if there is not parent/child relationship between windows/tabs?

    Read the article

  • Can I prevent Internet Explorer 8 from running scripts until the page is loaded?

    - by Tom W
    When trying to veiw a number of different websites in IE8, I get the following error message: HTML Parsing Error: Unable to modify the parent container element before the child element is closed (KB927917) On investigating the error message, it appears the script is trying to modify parts of the page before it is fully loaded. Is there a setting in IE8 I can change to prevent scripts from running until the page is fully loaded? EDIT: The sites in question used to work just fine, until I had to re-install IE8 for a seperate issue. Then they stopped working.

    Read the article

  • How can I fix my C++ compiler as it isn't loaded by default?

    - by GNR
    Recently I had installed the Ubuntu flavour of the Linux operating system. I had opened a terminal and just wrote a sample C program to check if it is compiling. When I saved the sample file and compiled with cc a.c, errors comes that the standard library is not loaded (i.e stdio.h). When I went to help pages, it says that the C or C++ compiler doesnt gets loaded by default and we should do it ourselves. So can anyone help me out to fix this problem, i.e to load the C/C++ compiler.

    Read the article

  • Have loaded a php variable into flash but cant apply it in a function...

    - by Paul Elliot
    hi I have created an actionscript function which stops an animation on a specific frame which works fine. I have then loaded in a php file with a variable which will contain the number for the frame i want the animation to stop on. This has loaded in fine and i have loaded it in a function. what i cant seem to do is to get the variable into the function which tells the animation to stop playing. here is my code: //load variables varReceiver = new LoadVars(); // create an object to store the variables varReceiver.load("http://playground.nsdesign6.net/percentage/external.php"); //load variables //function1 varReceiver.onLoad = function() { //value is the var that is created. var paul = this.percentage; } //function1 //function2 this.onEnterFrame = function() { if(this._currentframe==(percentage)) { this.stop(); this.onEnterFrame = undefined; } } play(); //function2 cheers paul

    Read the article

  • Can't get ajax - loaded image's height and width via jquery.

    - by Smickie
    I'm loading an image exteranlly via ajax like so... function load_image(image_href) { var img = new Image(); $(img).load(function () { $(this).hide(); $('#a_box').append(this); $(this).fadeIn(); }, gallery_image_load_complete() ).error(function () { }).attr('src', image_href); } function gallery_image_load_complete() { conslole.log('complete') $('#a_box img').height(); //wrong numbers, as though the image is partially loaded $('#a_box img').width(); //wrong numbers } The problem is I'm trying to get the loaded image's height and width inside the function gallery_image_load_complete(). For some reason, this image height and width are off, it's astohugh the image hasn't fully loaded. Can someone help me out please?

    Read the article

  • why this assembly program is loaded from the address 0B3D:0000?

    - by viperchaos
    I have seen a assembly program written from a book about assemble: assume cs:code code segment dw 0123h,0456h,0789h,0abch,0defh,0fedh,0cbah,0987h mov bx,0 mov ax,0 mov cx,8 s: add ax,cs:[bx] add bx,2 loop s mov ax,4c00h int 21h code ends end This program's function is to add eight numbers. The author compiled this program in the DOS and use the DEBUG to see how this program be loaded. The author use the R command and got that DS = 0B2DH ES = 0B2D SS = 0B3D CS = 0B3D IP = 0000 And then the author said that this program is loaded from the address 0B3D:0000. I'm a confused that why this program is loaded from the address 0B3D:0000? Is this because the existence of the Program Segment Prefix(PSP)? If the answer is the existence of the PSP, what is in the PSP?

    Read the article

  • Okular can't read pdf files

    - by hoang anh Nguyen
    I recently have installed Okular on my Ubuntu 14.04. The problem is when I open pdf files, okular gives me the error "Can not find a plugin which is able to handle the document being passed." When I ran Okular by Terminal, this is the message I get. okular(14100)/kdeui (KIconLoader): Error: standard icon theme "oxygen" not found! okular(14100)/kdeui (KIconLoader): Error: standard icon theme "oxygen" not found! okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100): No ksycoca4 database available! okular(14100)/kdecore (trader) KServiceTypeTrader::defaultOffers: KServiceTypeTrader: serviceType "okular/Generator" not found okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100): No ksycoca4 database available! okular(14100)/kdecore (trader) mimeTypeSycocaServiceOffers: KMimeTypeTrader: mimeType "application/pdf" not found okular(14100): No ksycoca4 database available! okular(14100)/kdecore (trader): KMimeTypeTrader: couldn't find service type "okular/Generator" Please ensure that the .desktop file for it is installed; then run kbuildsycoca4. okular(14100)/okular (app) Okular::Document::openDocument: No plugin for mimetype '"application/pdf"'. okular(14100): Couldn't start knotify from knotify4.desktop: "KLauncher could not be reached via D-Bus. Error when calling start_service_by_desktop_path: The name org.kde.klauncher was not provided by any .service files " okular(14100)/kdeui (KNotification) KNotification::slotReceivedIdError: Error while contacting notify daemon "The name org.kde.knotify was not provided by any .service files" X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x2a0002e okular(14110) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14110) KPixmapSequence::frameSize: No frame loaded okular(14110) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14110) KPixmapSequence::frameSize: No frame loaded okular(14110) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14110) KPixmapSequence::frameSize: No frame loaded X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x2a0001d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x2a0001d I would be much appreciated for any suggestion to solve this problem. Thanks a lot :)

    Read the article

  • XP Deploying issues due to msvcr90.dll trying to load FlsAlloc

    - by Sorin Sbarnea
    I have an application build with VS2008 SP1a (9.0.30729.4148) on Windows 7 x64 that does not want to start under XP. The message is The application failed to initialize properly (0x80000003). Click on OK to terminate the application.. I checked with depends.exe and found that msvcr90.dll does try to load FlsAlloc from KERNEL32.dll - and FlsAlloc is available only starting with Vista. I'm sure it is not used by the application. How to solve the issue? The SxS package is already installed on the target machine - In fact I have all 3 versions of 9.0 SxS (initial release, sp1, and sp1+security patch) Application is compiled with _BIND_TO_CURRENT_VCLIBS_VERSION=1 Also I defined the right target Windows version on stdafx.h #define WINVER 0x0500 #define _WIN32_WINNT 0x0500 Manifest file <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level="asInvoker" uiAccess="false" /> </requestedPrivileges> </security> </trustInfo> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.VC90.CRT" version="9.0.30729.4148" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b" /> </dependentAssembly> </dependency> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.VC90.MFC" version="9.0.30729.4148" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b" /> </dependentAssembly> </dependency> </assembly> Result from depends Started "c:\program files\app\app.EXE" (process 0xA0) at address 0x00400000. Successfully hooked module. Loaded "c:\windows\system32\NTDLL.DLL" at address 0x7C900000. Successfully hooked module. Loaded "c:\windows\system32\KERNEL32.DLL" at address 0x7C800000. Successfully hooked module. Loaded "c:\program files\app\MFC90.DLL" at address 0x785E0000. Successfully hooked module. Loaded "c:\program files\app\MSVCR90.DLL" at address 0x78520000. Successfully hooked module. Loaded "c:\windows\system32\USER32.DLL" at address 0x7E410000. Successfully hooked module. Loaded "c:\windows\system32\GDI32.DLL" at address 0x77F10000. Successfully hooked module. Loaded "c:\windows\system32\SHLWAPI.DLL" at address 0x77F60000. Successfully hooked module. Loaded "c:\windows\system32\ADVAPI32.DLL" at address 0x77DD0000. Successfully hooked module. Loaded "c:\windows\system32\RPCRT4.DLL" at address 0x77E70000. Successfully hooked module. Loaded "c:\windows\system32\SECUR32.DLL" at address 0x77FE0000. Successfully hooked module. Loaded "c:\windows\system32\MSVCRT.DLL" at address 0x77C10000. Successfully hooked module. Loaded "c:\windows\system32\COMCTL32.DLL" at address 0x5D090000. Successfully hooked module. Loaded "c:\windows\system32\MSIMG32.DLL" at address 0x76380000. Successfully hooked module. Loaded "c:\windows\system32\SHELL32.DLL" at address 0x7C9C0000. Successfully hooked module. Loaded "c:\windows\system32\OLEAUT32.DLL" at address 0x77120000. Successfully hooked module. Loaded "c:\windows\system32\OLE32.DLL" at address 0x774E0000. Successfully hooked module. Entrypoint reached. All implicit modules have been loaded. DllMain(0x78520000, DLL_PROCESS_ATTACH, 0x0012FD30) in "c:\program files\app\MSVCR90.DLL" called. GetProcAddress(0x7C800000 [c:\windows\system32\KERNEL32.DLL], "FlsAlloc") called from "c:\program files\app\MSVCR90.DLL" at address 0x78543ACC and returned NULL. Error: The specified procedure could not be found (127). GetProcAddress(0x7C800000 [c:\windows\system32\KERNEL32.DLL], "FlsGetValue") called from "c:\program files\app\MSVCR90.DLL" at address 0x78543AD9 and returned NULL. Error: The specified procedure could not be found (127). GetProcAddress(0x7C800000 [c:\windows\system32\KERNEL32.DLL], "FlsSetValue") called from "c:\program files\app\MSVCR90.DLL" at address 0x78543AE6 and returned NULL. Error: The specified procedure could not be found (127). GetProcAddress(0x7C800000 [c:\windows\system32\KERNEL32.DLL], "FlsFree") called from "c:\program files\app\MSVCR90.DLL" at address 0x78543AF3 and returned NULL. Error: The specified procedure could not be found (127).

    Read the article

  • Why is Automator crashing on launch?

    - by zbrimhall
    I've run into an odd problem where Automtor.app on Snow Leopard crashes on launch. At some point in the past, I put a copy of iPhoto.app into my public directory to copy over to another machine. Now, Automator.app won't run unless my public directory has a copy of iPhoto.app in it. If I remove it, Automator.app crashes on launch. Here's what happens: Launch Automator.app After the Automator menu bar appears, but before any windows appear, I get the dreaded beach ball for a few seconds Automator crashes Here's the output from Console.app: 12/26/09 2:11:24 PM Automator[11736] The action “Add Movie to iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Get iDVD Slideshow Images” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Initiate Remote Broadcast” could not be loaded because the application “QuickTime Broadcaster” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Movie Sequence” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Slideshow” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New QuickTime Slideshow” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set iDVD Background Image” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set iDVD Button Face” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie Annotations” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie Playback Properties” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie URL” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Show Main iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path The value %@ is invalid.: The file “The value %@ is invalid.” couldn’t be opened because there is no such file. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path /Users/brimhall/Public/iPhoto.app: The file “iPhoto.app” couldn’t be opened because there is no such file. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path The value %@ is invalid.: The file “The value %@ is invalid.” couldn’t be opened because there is no such file. 12/26/09 2:11:26 PM Automator[11736] -[NSAttributeDictionary length]: unrecognized selector sent to instance 0x49c770 12/26/09 2:11:26 PM Automator[11736] -[NSAttributeDictionary length]: unrecognized selector sent to instance 0x49c770 12/26/09 2:11:38 PM com.apple.launchd.peruser.501[203] ([0x0-0x2ad2ad].com.apple.Automator[11736]) Job appears to have crashed: Segmentation fault I've tried deleting my Automator.app Preferences file and Application Support directory to get it to look for iPhoto.app in the system-wide Applications directory, but to no avail. Any suggestions on how I can get things working as normal?

    Read the article

  • Why is Automator crashing on launch?

    - by zbrimhall
    I've run into an odd problem where Automtor.app on Snow Leopard crashes on launch. At some point in the past, I put a copy of iPhoto.app into my public directory to copy over to another machine. Now, Automator.app won't run unless my public directory has a copy of iPhoto.app in it. If I remove it, Automator.app crashes on launch. Here's what happens: Launch Automator.app After the Automator menu bar appears, but before any windows appear, I get the dreaded beach ball for a few seconds Automator crashes Here's the output from Console.app: 12/26/09 2:11:24 PM Automator[11736] The action “Add Movie to iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Get iDVD Slideshow Images” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Initiate Remote Broadcast” could not be loaded because the application “QuickTime Broadcaster” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Movie Sequence” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Slideshow” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New QuickTime Slideshow” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set iDVD Background Image” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set iDVD Button Face” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie Annotations” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie Playback Properties” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie URL” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Show Main iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path The value %@ is invalid.: The file “The value %@ is invalid.” couldn’t be opened because there is no such file. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path /Users/brimhall/Public/iPhoto.app: The file “iPhoto.app” couldn’t be opened because there is no such file. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path The value %@ is invalid.: The file “The value %@ is invalid.” couldn’t be opened because there is no such file. 12/26/09 2:11:26 PM Automator[11736] -[NSAttributeDictionary length]: unrecognized selector sent to instance 0x49c770 12/26/09 2:11:26 PM Automator[11736] -[NSAttributeDictionary length]: unrecognized selector sent to instance 0x49c770 12/26/09 2:11:38 PM com.apple.launchd.peruser.501[203] ([0x0-0x2ad2ad].com.apple.Automator[11736]) Job appears to have crashed: Segmentation fault I've tried deleting my Automator.app Preferences file and Application Support directory to get it to look for iPhoto.app in the system-wide Applications directory, but to no avail. Any suggestions on how I can get things working as normal?

    Read the article

  • How do I get rid of "API restriction UnitTestFramework.dll already loaded" error?

    - by Kevin Driedger
    The following error pops up every now and then: C:\Program Files\MSBuild\Microsoft\VisualStudio\v9.0\TeamTest\Microsoft.TeamTest.targets(14,5): error : API restriction: The assembly 'file:///C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PublicAssemblies\Microsoft.VisualStudio.QualityTools.UnitTestFramework.dll' has already loaded from a different location. It cannot be loaded from a new location within the same appdomain. How do I get rid of it?

    Read the article

  • Prototype JS swallows errors in dom:loaded, and ajax callbacks?

    - by WishCow
    I can't figure out why prototype suppressess the error messages in the dom:loaded event, and in AJAX handlers. Given the following piece of HTML: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Conforming XHTML 1.1 Template</title> <script type="text/javascript" src="prototype.js"></script> <script type="text/javascript"> document.observe('dom:loaded', function() { console.log('domready'); console.log(idontexist); }); </script> </head> <body> </body> </html> The domready event fires, I see the log in the console, but there is no indication of any errors whatsoever. If you move the console.log(idontexist); line out of the handler, you get the idontexist is not defined error in the console. I find it a little weird, that in other event handlers, like 'click', you get the error message, it seems that it's only the dom:loaded that has this problem. The same goes for AJAX handlers: new Ajax.Request('/', { method: 'get', onComplete: function(r) { console.log('xhr complete'); alert(youwontseeme); } }); You won't see any errors. This is with prototype.js 1.6.1, and I can't find any indication of this behavior in the docs, nor a way to enable error reporting in these handlers. I have tried stepping through the code with FireBug's debugger, and it seems to jump to a function on line 53 named K, when it encounters the missing variable in the dom:loaded handler: K: function(x) { return x } But how? Why? When? I can't see any try/catch block there, how does the program flow end up there? I know that I can make the errors visible by packing my dom:ready handler(s) in try/catch blocks, but that's not a very comfortable option. Same goes for registering a global onException handler for the AJAX calls. Why does it even suppress the errors? Did someone encounter this before?

    Read the article

  • JQuery: How do I perform a callback on JQuery once it's loaded?

    - by Teddyk
    I'm downloading JQuery asynchronously: function addScript(url) { var script = document.createElement('script'); script.src = url; document.getElementsByTagName('head')[0].appendChild(script); } addScript('jquery.js'); // non-jquery code ... // jquery specific code like: $()... As such - how do I call my JQuery specific code once JQuery is loaded (because since I'm downloading my JavaScript asynch - it's not blocking, which is good, but is trying to execute my JQuery specific code before JQuery has been loaded).

    Read the article

  • How to tell which php.ini files is loaded ?

    - by Vince Jacobs
    Looking at my php.info all it says is "Loaded Configuration file:" C:\xampp\php\php.ini Yet I have two ini files inside the php folder. One, "development", the other "production". I can not see within either ini file the value, "Loaded Configuration file" .. So How do I tell which one is being used and where is that managed ? My goal is to have only 1 ini file and disable the other. Many Thanks !

    Read the article

  • What happens if we load already loaded class again?

    - by GK
    I mean we have a class which is already loaded in JVM. and in some other method we are unknowingly trying to load that same class, So in this situation what happens? ie will there be any error or exception saying its already loaded. If not, then is it possible that we can have modified class with some extra features and load it whenever it is required that is Hot Deployment.

    Read the article

  • PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded

    - by Tiny
    I'm trying to upgrade php 5.4.14 from php 5.4.3 in wamp server 2.2e. I have downloaded php-5.4.14-Win32-VC9-x86 (thread safe). Extracted it under C:\wamp\bin\php. Copied wampserver.conf from C:\wamp\bin\php\php5.4.3 to C:\wamp\bin\php\php5.4.14. Renamed php.ini-development to phpForApache.ini. -The port number the wamp server has been changed in the http.conf file to 8087 from its default 80. This is mentioned here though it is about upgrading from php 5.3.5 to php 5.4.0. After this, Restarting of the wamp server and services all over again has all been done and those two versions appeared in the menu php-versions (which is opened when the icon of the server is clicked). But when I attempt to enable a library like php_mysql or php_mysqli, a warning message box appears. PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded. I have also tried to removing the semicolon before them in the php.ini file but to no avail. I'm running Microsoft Windows XP Professional Version 2002, service pack 3. Where might be the problem? EDIT: I have changed extension_dir from C:\php to c:\wamp\bin\php\php5.4.14\ext\ in php.ini as the answer below indicates and the library is now loaded correctly but it says, 1045 - Access denied for user 'root'@'localhost' (using password: YES) though the user name and the password are the same as they are in MySQL in the config.inc.php file under phpmyadmin. I have also tried to restart MySQL56 service from Control Panel-Services(Local) but it keeps giving the same error. Does someone know why this happens?

    Read the article

  • How to configure TATA Photon+ EC1261 HUAWEI

    - by user3215
    I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

    Read the article

  • how to get Geo::Coder::Many with cpan?

    - by mnemonic
    Ubuntu is installed for development of a Perl project. aptitude search Geo-Coder i libgeo-coder-googlev3-perl - Perl module providing access to Google Map Aptitude does not refer to Geo::Coder::Many cpan can not build it. sudo cpan Geo::Coder::Many Then: CPAN: Storable loaded ok (v2.27) Going to read '/home/jh/.cpan/Metadata' Database was generated on Wed, 16 Oct 2013 06:17:04 GMT Running install for module 'Geo::Coder::Many' Running make for K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz CPAN: Digest::SHA loaded ok (v5.61) CPAN: Compress::Zlib loaded ok (v2.033) Checksum for /home/jh/.cpan/sources/authors/id/K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz ok CPAN: File::Temp loaded ok (v0.22) CPAN: Parse::CPAN::Meta loaded ok (v1.4401) CPAN: CPAN::Meta loaded ok (v2.110440) CPAN: Module::CoreList loaded ok (v2.49_02) CPAN: Module::Build loaded ok (v0.38) CPAN.pm: Going to build K/KA/KAORU/Geo-Coder-Many-0.42.tar.gz Can't locate Geo/Coder/Many/Google.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/share/perl/5.14/Module/Load.pm line 27. Can't locate Geo/Coder/Many/Google in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/share/perl/5.14/Module/Load.pm line 27. BEGIN failed--compilation aborted at Build.PL line 54. Warning: No success on command[/usr/bin/perl Build.PL --installdirs site] CPAN: YAML loaded ok (v0.77) KAORU/Geo-Coder-Many-0.42.tar.gz /usr/bin/perl Build.PL --installdirs site -- NOT OK Running Build test Make had some problems, won't test Running Build install Make had some problems, won't install Could not read metadata file. Falling back to other methods to determine prerequisites Any suggestions how to resolve this issue?

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >