Search Results

Search found 10673 results on 427 pages for 'recovery disk'.

Page 18/427 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Disk quota problem in Windows Server SBS 2003

  - by deddebme

  I have got a new job and the existing SBS 2003 domain setup is unsecure (i.e. everyone is a domain admin etc etc). There are lots of problem due to inexperienced "network admin", and I am trying to fix them one by one. There exist one issue which I found quite weird, that the "Quota" tab exists in the C:(NTFS) drive but not the D:(NTFS) drive. I played around with gpedit to enable disk quota (it was "not configured" before), but still I can't see that tab. Have you seen this problem before? How did you solve it?

  Read the article

• iSCSI RAID1 on two servers, fail scenario

  - by Franz Kafka

  Hallo, a simple question: Image I have two servers, each server has two disks in RAID1. Now I merge the two arrays with iSCSI to one RAID1 disk. Two questions: Can I do the merging of the 4 disks in one go? I can't image how. First I will have to install the os, and then the raid controller is already set up to RAID1. If a whole server fails the other server would continue working without any problems? Does iSCSI notice that the other server is missing and treet this as if the two disks were broken? When the server comes back online the data is resynced, as if I installed new disks into a array? Can I image that this way? Thanks alot.

  Read the article

• Disk space profiling in Unix

  - by user1677770

  I'm looking for a tool to summarize how disk space is being used on very large partitions. Our file system is around 950TB, mostly broken up into 20TB partitions. There are some really nice graphical tools for visualising these file spaces: http://www.disksavvy.com/disksavvy_screenshots.html http://methylblue.com/filelight/ But I'm really not sure how well they will scale. Does anybody have any experience of these tools and can make any recommendations? Even something that parses and summarises a really big du output would be a good start.

  Read the article

• Automating Disk Cleanup on Windows using commandline

  - by Ram

  I asked this question on the MSDN forums but there was no response. Maybe someone might be able to help me out here. I am trying to run Disk Cleanup in the command prompt (and through a C# program) and so I went through all the available options from this link: http://support.microsoft.com/kb/315246 While I am just trying to understand what I can do, it would be good if someone could explain why the drive option /d cannot be set while specifying /sagerun:n Or is it possible, by some way, to run /sagerun for a specific drive? Thanks.

  Read the article

• Disk quota problem in Windows Server SBS 2003

  - by deddebme

  I have got a new job and the existing SBS 2003 domain setup is unsecure (i.e. everyone is a domain admin etc etc). There are lots of problem due to inexperienced "network admin", and I am trying to fix them one by one. There exist one issue which I found quite weird, that the "Quota" tab exists in the C:(NTFS) drive but not the D:(NTFS) drive. I played around with gpedit to enable disk quota (it was "not configured" before), but still I can't see that tab. Have you seen this problem before? How did you solve it?

  Read the article

• Disk Utility Restore causes "Could not validate resource - Invalid Argument"

  - by Yahoo

  I have a problem with Disk Utility on Mac OS X 10.6. I have an image of Windows that I would like to use as a bootable volume on a pen drive or external hard drive. The thing is: When I try to restore the volume from the image I get an error: "Restore Failure: Could not validate resource - Invalid Argument" I read some information about that error on the Internet. I converted the image into .iso (Mac OS Extended/ISO (Joliet) Hybrid Image) format and then got this error: "Restore Failure: Could not find any scan information. The source image needs to be imagescanned before it can be restored." When I try to scan the image for Restore, I get the first message. I really read a lot of information about this topic on the Internet, but I haven't found the solution. I tried both ISO and DMG formats; I don't know which is best.

  Read the article

• Backup virtual hard disk

  - by Harshil Sharma

  I have a VM created in VMWare Player. It's VHD is currently sized 17 GB, split among multiple 2 GB files. The host OS is Windows 8. I use CrashPlan in host OS for file backup. The problem is, whenever I use the VM, CrashPlan detects all parth of VHD as altered and backs up the 17 GB VHD. WHat I want is a software that can run on host OS (Windows 8), treat the VHD as a physical hard disk and create incremental backups of the VHD, includeing all files, programs and the OS

  Read the article

• Xen Disk Performence Issues

  - by user98651

  I'm currently using Xen PV on CentOS 5 with my domU's as flat files running on a hardware RAID controlled (write cache enabled) formatted with XFS. On the dom0 I can get about 500MB/s in a 2GB dd write from /dev/zero however on the domU's I'm lucky if I get 10MB/s (it is usually around half that). I've tried changing the disk scheduling to NOOP on the domU's, changed some mount parameters and tweaked the performance allocations of both the dom0 (prioritize CPU) and domU's (increase RAM and VCPU allocations). None of these steps have produced any noticeable change in performance. My instinct here is that it is not a hardware problem, due to the solid performance of the dom0. Any ideas on what might be causing this problem? I'm considering moving to LVM based domU's.

  Read the article

• openSuse full disk encryption

  - by djechelon

  I'm a proud Suser. I'm about to reinstall 12.2 on my ASUS N76VZ (UEFI x64 laptop). Since I'm very sensitive about laptop security against theft or unwanted inspection, I chose to use BitLocker with USB dongle in Windows 7. When installing Suse the last time I found that only the home partition (separated from root) was capable of being encrypted. Does Suse offer a full disk encryption solution like BitLocker that I haven't discovered yet? Or is encrypting home partition the only way to protect data? Encrypting only home is feasible as one stores personal data in home, but I still would like to encrypt the whole thing! Also, using a hardware token (no TPM available) for unlocking is preferred to password, if possible! Thanks

  Read the article

• Is rsync --delete safe in case of disk failure

  - by enedene

  I have two data hard drives on my Linux server and I use second as a backup for a first drive. I use rsync for that purpose. An example would be: rsync -r -v --delete /media/disk1/ /media/disk2/ What this does is that it copies every file/directory from /media/disk1/ to /media/disk2/ but also deletes any difference. For example, lets say that files A and B but not file C are on disk1, and on disk2 there is no A and B files, but there is C. The result would be that after the command on disk2 I'd have files A and B, but file C would be deleted, just like on disk1. Now, a rather disastrous scenario had crossed my mind; what if disk1 dies, system continues to work since system files are on my system disk, but when rsync tries to backup my data on disk2 from broken disk1, it deletes all the files from disk2 because it can't read anything on disk1. Is this a possible scenario, or is there a protection from it build in rsync?

  Read the article

• How to increase the disk cache of Windows 7

  - by Mark Christiaens

  Under Windows 7 (64 bit), I'm reading through 9000 moderately sized files. In total, there is more than 200 MB of data. Using Java (JDK 1.6.21) I'm iterating over the files. The first 1400 or so go at full speed but then speed drops off to 4ms per file. It turns out that the main cost is incurred simply by opening the files. I'm opening the files using new FileInputStream (and of course closing them in time to avoid file leaks). After some investigating, I see that Windows' disk cache is using only 100 MB or so of RAM although I have 8 GiB available. I've tried increasing the cache size using the CacheSet tool but any values I provide are considered out of range. I've also tried enabling the LargeSystemCache registry key but (after rebooting) the CacheSet tool still indicates I'm using 100 MB of cache (and doesn't increase during the test run). Does anybody have any suggestions to "encourage" Windows 7 to cache my 9000 files?

  Read the article

• Skype Disk Full Error...

  - by commradepolski

  I have searched around online for an answer to this one without any luck. Every couple of days, on my PC I get an error with Skype, that says Disk Full. I have plenty of HD space so I know that is not the issue. I am able to resolve the problem temporarily by killing the skype process and restarting skype. Does anyone know of a solution to this problem to stop it from happening? I am running Skype 4.2.0.169.

  Read the article

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• How do I boot to the Recovery Partition on an eMachines D620 notebook?

  - by GraemeF

  I installed the Windows 7 RC on my wife's laptop and now need to reinstall Vista for her. I was very careful to leave the recovery partition intact so that I could do this, but I don't see a way to boot to it. In the Disk Management console I can see the "9.77GB Healthy (Recovery Partition)" partition but I can't do anything with it - the context menu only contains the Help option. Any ideas?

  Read the article

• Can't find disk usage in one directory

  - by Xster

  Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

  Read the article

• disk space keeps filling up on EC2 instance with no apperent files/directories

  - by sasher

  How come os shows 6.5G used but I see only 3.6G in files/directories? Running as root on an Amazon Linux AMI (seems like Centos), lots of free memory available, no swapping going on, no apparent file descriptors issue. The only thing I can think of is a log file that was deleted while applications append to it. Disk space usage is slowly but continuously rising towards full capacity (~1k/min with very small decreases from time to time) Any explanation? Solution? du --max-depth=1 -h / 1.2G /usr 4.0K /cgroup 22M /lib64 11M /sbin 19M /etc 52K /dev 2.1G /var 4.0K /media 0 /sys 4.0K /selinux du: cannot access /proc/14024/task/14024/fd/4': No such file or directory du: cannot access<br/> /proc/14024/task/14024/fdinfo/4': No such file or directory du: cannot access /proc/14024/fd/4': No such file or directory du: cannot<br/> access/proc/14024/fdinfo/4': No such file or directory 0 /proc 18M /home 4.0K /logs 8.1M /bin 16K /lost+found 12M /tmp 4.0K /srv 35M /boot 79M /lib 56K /root 67M /opt 4.0K /local 4.0K /mnt 3.6G / df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.5G 1.4G 84% / tmpfs 3.7G 0 3.7G 0% /dev/shm sysctl fs.file-nr fs.file-nr = 864 0 761182

  Read the article

• Linux RAID: Replacing Failed Drive...permanantly

  - by user137519

  Okay, odd question here. I have a server with RAID 5. A drive failed, in a really physically in a really odd way. On the machine it boots and is seen by the BIOS but...no partition can be seen on the drive consistantly (in and out). 2 out of 3 drives working...I made new spare disk and added it, RAID 5 rebuilt clean. All appears well but...when I reboot it keeps trying to use the 2nd drive which doesn't give any partition data, so of course the RAID 5 gets 2 out of 3...again. The status of my drive is as follows: /dev/sda2:Good /dev/sdb2 (drive has physical problem so no partition data) bad, /dev/sdc2:good /dev/sdd2:good. Every time I reboot the mdadm system seems to keep trying to use /dev/sdb which has physical failure (although spins and is detected). /dev/sdd is the new drive I created. I added /dev/sdd to the raid and it rebuilds the raid but this action isn't memorized upon reboot so it keeps listing /dev/sda and /dev/sdc but doesn't use the perfectly good /dev/sdd until I re-add manually. I've tried removing the dead drive with the mdadm tool, but as it cannot see /dev/sdb paritions it will not fail or remove it (says partition doesn't exist). the /etc/mdadm.conf was automatically made on the original OS install which only lists: DEVICE partitions MAILADDR root ARRAY /dev/md2 super-minor=2 ARRAY /dev/md0 super-minor=0 ARRAY /dev/md1 super-minor=1 Basically just the raids to use on boot. I need to remove this semi-dead drive (/dev/sdb) but I'd prefer to know why this is happening before I do. any ideas or suggestions. I supposed I could attempt to clone/replace /dev/sdb (the partitions on drive show up, then disappear shortly after) but given the partition "chester cat" behaviour this seems risky to me and as I have a working "spare" it seems unnecessary. Thanks in advance for your insight.

  Read the article

• Uses for Types of Data Recovery Services

  There are several different types of data recovery services, including hard drive, server raid, and smart media recovery. What makes things tricky is to know when to use which service, and how to kno... [Author: Richard Cuthbertson - Computers and Internet - April 08, 2010]

  Read the article

• Reporting Services Disaster Recovery

  Dave Lumley presents a Reporting services disaster recovery solution for SQL Server Standard Edition, using 2 servers. Worth the read if you don't run Enterprise. SQL Backup Pro wins Gold Community Choice AwardFind out why the SQL Server Community voted SQL Backup Pro 'Best Backup and Recovery Product 2012'. Get faster, smaller, fully verified backups. Download a free trial now.

  Read the article

• Windows is not available in GRUB's boot menu, but Windows Recovery is available

  - by rafalcieslak

  I had Windows Vista installed on a laptop. I have installed separately Ubuntu, wanting to have a dual-boot system. Now, Ubuntu works OK, but I am unable to boot into Windows. GRUB menu provides me with two entries: "Windows Vista (loader)" and "Windows Recovery Environment (loader)". However, BOTH boot into recovery environment. Running sudo update-grub does not change anything. I use an up-to-date 10.10.

  Read the article

• Backup and Recovery of Windows 8 - Tip-of-the-Day

  - by KeithMayer

  Have you recently downloaded Windows 8 RTM? In this article, we'll introduce you to the new options available for making Backup and Recovery in Windows 8 easier than ever, including Windows 8 File History, launching Windows System Backup and Windows 8 Refresh & Reset PC. Use these options to define your backup and recovery plan so that you'll be prepared to restore the system and your data when needed.

  Read the article

• On Demand Webinar: Extreme Database Performance meets its Backup and Recovery Match

  - by Cinzia Mascanzoni

  Oracle’s Sun ZFS Backup Appliance is a tested, validated and supported backup appliance specifically tuned for Oracle engineered system backup and recovery. The Sun ZFS Backup Appliance is easily integrated with Oracle engineered systems and provides an integrated high-performance backup solution that reduces backup windows by up to 7x and recovery time by up to 4x compared to competitor engineered systems backup solutions. Invite partners to register to attend this webcast to learn how the Sun ZFS Backup Appliance can provide superior performance, cost effectiveness, simplified management and reduced risk.

  Read the article

• RAID & UNIX UFS Data Recovery ? Is Data Recovery Always Possible?

  For those in the RAID data recovery field, those instances of data recovery that are most interesting are when there are multiple issues to contend with. Therefore when you combine a RAID failure wit... [Author: Michiel Van Kets - Computers and Internet - May 05, 2010]

  Read the article

• The Database Recovery Advisor in SQL Server 2012

  The Database Recovery Advisor in SQL Server 2012 will aid the ability of DBAs to recover their databases to a point in time in a crisis. Read about this new feature and how it can speed the process of recovery. What are your servers really trying to tell you? Find out with new SQL Monitor 3.0, an easy-to-use tool built for no-nonsense database professionals.For effortless insights into SQL Server, download a free trial today.

  Read the article

• Die Fast / Flashback Recovery Area (FRA)

  - by Sebastian Solbach (DBA Community)

  In der Vergangenheit waren Informationen zur Fast Recovery Area (kurz FRA) bzw. Flashback Recovery Area, wie die FRA for 11gR2 benannt wurde, immer mal wieder in den einzelnen DBA Community Tipps enthalten, wenn dies gerade zum Thema passte oder für den Tipp relevant waren. Aus aktuellem Anlass haben wir uns deswegen entschlossen, die Informationen zur FRA im heutigen DBA Community Tipp  zu bündeln, damit man sofort eine Übersicht erhält und die automatischen Mechanismen innerhalb der FRA versteht. Zum Tipp.

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >