Search Results

Search found 2462 results on 99 pages for 'workaround'.

Page 18/99 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Why was libhal removed in Ubuntu 13.10?

  - by I-Jo

  After installing 13.10, I realized libhal was no longer a sudo apt-get install away... in fact it was no longer anywhere to be found (except in the Raring Repos). And installing libhal from the raring repos is not the best option. It is the best workaround for not having it. Why was it removed? Was it an accidental removal, or is it no longer going to be included in the repos, even in the next LTS? I ask because Amazon (and other services) require it to be installed.

  Read the article

• Xubuntu 14.04 will not boot after preseed installation

  - by Christian

  I recently set up Xubuntu 14.04 installation using preseed, and ran into a couple of problems during boot time. At first, right after the installation completed during first boot the system complained about /tmp not being mounted and did not proceed any further. I was able to fix that problem by making an entry for /tmp in /etc/fstab like so: tmpfs /tmp tmpfs optional,nodev,nosuid 0 0 This worked for a while (and still does for workstations that are already running), but newly installed machines are broken. They do not complain like before, but take forever to boot (2h) and it seems the root partition is mounted read only and you cannot do anything useful with the system. Any ideas on what to do? You can find the presseed file here Thanks in advance Update: If I get it to boot once via some magic in rescue mode (like simply mounting the root partition read-write, then resume boot) it will work forever. While this is a workaround, it is no option to do this for every installation.

  Read the article

• Keyboard shortcut: Win key doesn't work for custom commands

  - by Xiè Jìléi

  It's all ok before upgraded from 10.04 to 12.04. It seems all right. In keyboard shortcut window, if I pressed Win+V, it can capture the key combination as Super+V, no problem. I've checked the output from xev utility, the left and right Win keys are translated to Super_L and Super_R correctly. I have found a workaround, though. Using gconf-editor, edit the entries /desktop/gnome/keybindings/*/binding and replace <Super> with <Mod4> for the problem bindings. However Super+... keys do work for most built-in actions such as "switch workspace", they just don't work for custom commands.

  Read the article

• How to customise window decoration whilst using Compiz on Xubuntu?

  - by Benjamin

  I have installed Compiz on Xubuntu 11.10 with sudo apt-get install compiz compizconfig-settings-manager compiz --replace ccp & In the process the XFCE window decoration theme is overridden by that of Compiz (Gtk) which uses the Adwaita theme instead of the Greybird theme. Since Gtk is doing window decoration, I cannot change it back using the XFCE settings. I just need compiz for scale and window switch and I would like to return window decoration to XFCE (Xfwm4) or to be able to change the Gtk window decoration theme. How can I do that? I have found part of the (workaround) answer already: download Greybird Gtk theme install theme (here is where I failed I think) use dconf-editor to change the Gtk theme in org.gnome.desktop.interface The problem really at stage 2 is where do I place the theme? I tried in ~/.themes/ and then changed the value of gtk-theme in the editor to Greybird. But I saw no change.

  Read the article

• sudo & redirect output

  - by Khaled

  I have a small question regarding using sudo with output redirect >. To enable IP forwrding, someone can use the command: $ echo 1 > /proc/sys/net/ipv4/ip_forward Executing this command will give permission denied as it requires root privileges. However, executing the same command with sudo gives also permission denied error! It seems that output redirect > does not inherit the permissions of the preceding command echo. Is this right? As a workaround I do: $ echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward Is this the best way to do it? Am I missing something? Please, note that this is an example and it applies to all commands that use output redirect.

  Read the article

• KnockoutJS 2.3.0 - Uncaught Error: You cannot apply bindings multiple times to the same element.

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/07/25/knockoutjs-2.3.0---uncaught-error-you-cannot-apply-bindings-multiple.aspxI upgrade KnockoutJs through Nuget and started getting the error ‘Uncaught Error: You cannot apply bindings multiple times to the same element.’ when I used applyBindings after the main page load. I had some dynamically added DOM elements and re-applying bindings worked before. It always seemed like a workaround/hack, but now Knockout is telling me that I shouldn’t do it. The quick way to fix this is to use ko.cleanNode($(‘#id’) and this works. A different/possibly better way, as suggested by x0n might be to use templates and Knockout’s template binding (<script type=’text/html’>…</script>).   Thanks again to the StackOverflow community for quickly providing me with the solution. Check out my question for all the details.

  Read the article

• Redirecting non existing post to homepage; is that good for SEO?

  - by BlackEagle

  I am checking my website out on Google Webmasters and I am seeing an astonishing 5000 links that could not be found by Google's Crawlers. That's normal, because my website is built in a manner that users can drop their own things, which also lead to 404 pages. Not a problem at all if I can find a workaround of course... So my question is: what if I made a function or a mod rewrite that will check if the link exists (a post for example) and if not, it will redirect it to the home page. Is this good for SEO? Will Google see this as 'link found'? How do I have to look at this problem?

  Read the article

• EPM 11.1.2 - Issues during configuration when using Oracle DB if not using UTF8

  - by Ahmed A

  If you see issues during configuration when using Oracle DB if not using UTF8: Workaround: a. During configuration of EPM products, a warning message is displayed if the Oracle DB is not UTF8 enabled. If you continue with the configuration, certain products will not work as they will not be able to read the contents in the tables as the format is wrong.b. The Oracle DB must be setup to use AL32UTF8 or a superset that contains AL32UTF8. c. The only difference between AL32UTF8 and UTF8 character sets is that AL32UTF8 stores characters beyond U+FFFF as four bytes (exactly as Unicode defines UTF-8). Oracle’s “UTF8” stores these characters as a sequence of two UTF-16 surrogate characters encoded using UTF-8 (or six bytes per character). Besides this storage difference, another difference is better support for supplementary characters in AL32UTF8 character set.

  Read the article

• OpenVPN is installed but it is not an avaliable option in the network manager

  - by Relik

  I have installed and used openVPN once before in a previous install of Ubuntu 12.04. I have since reformatted, and now after reinstalling openVPN it will not show up in the network manager. I am trying to setup my VPN connection and the only option I have to choose from is PPTP. EDIT: I have Gnome Shell and KDE installed as well, Gnome being my primary. I cannot find OpenVPN in either Gnome or Unity, however I can add it without an issue in KDE. Not really an acceptable workaround, but it works for now. I would still like to be able to do it in GTK based desktops as well.

  Read the article

• Java update alert: issue with EAS 11.1.2.3

  - by inowodwo

  (in via Nancy) Customers using EPM 11.1.2.3 and a web browser to launch the Essbase Administration Services Console will lose the ability to launch EAS Console via the Web URL if they apply Java 1.7 build 45. Development is currently investigating this issue. Workaround: If Java 1.7 Update 45 has been installed, it will need to be uninstalled and a previous version will need to be installed. Older versions of Java are available in the Java Archive Note: Though it may work, Java 1.7 is not supported in previous versions of EAS. Customers running a version of EAS Console prior to 11.1.2.3 need to install the supported version of JRE. Follow this in the Community

  Read the article

• ASP -response-flush-flushes-partial-data

  - by Anshu

  I am developing a web app with an ASP server side and I use an iframe for data push. An ASP handler flushes every once in a while some javascript to the iframe: context.Response.Write("<script language='javascript'>top.update('lala');</script>"); context.Response.Flush(); My problem is that sometimes, when I receive the data, I don't get the full text. For example I will receive this : update('lala'); One workaround I have is to have a thread flushing '..........' every 500ms. (Then I will receive script...... which will complete my javascript.) However I am sure there must be a way to have Response.Flush() sending the whole chunk of data. Does someone have an idea on how to use properly Response.Flush() ? Thank you!

  Read the article

• Bandwidth Problem in Terminal?

  - by Rob Barker

  I'm trying to install the Mac cursors to Ubuntu 12.04 but i get this error when using the wget command in Terminal. ubuntu@ubuntu:~$ wget -O mac-cursors.zip http://dl.dropbox.com/u/53319850/NoobsLab.com/mac-cursors.zip --2012-12-09 16:31:17-- http://dl.dropbox.com/u/53319850/NoobsLab.com/mac-cursors.zip Resolving dl.dropbox.com (dl.dropbox.com)... 23.21.195.136, 23.23.139.153, 107.20.134.231, ... Connecting to dl.dropbox.com (dl.dropbox.com)|23.21.195.136|:80... connected. HTTP request sent, awaiting response... 509 Bandwidth Error 2012-12-09 16:31:18 ERROR 509: Bandwidth Error. Can someone tell me what this means please, and a possible workaround? Thanks very much.

  Read the article

• Can't print, CUPS package corrupted and hangs on re-install

  - by Little Bobby Tables

  When I upgraded to Ubuntu 10.4 (Maverick), the upgrade process got stuck on the post-installation of the CUPS package. I had to kill processes and run several forced updates before I could finally get regular updated. Ever since I can't print - The printed file gets messed up and crashes the printer. I also can't re-install CUPS, as each time the installation hangs and I have to kill it before it completes. I tried to find a workaround for this problem, but in vain. Does anyone know how to bypass this? Or at least why can the post-installation hang, and how to re-install a problematic package? Some system specs and other hints: Dell D630 laptop running Ubuntu 10.4, Gnome desktop, standard LAN network, printing to an LPD server. Everything worked fine on 9.10. Also, the printed files themselves are not corrupted. The problem does not seem to be Evince-specific, but common to all printouts.

  Read the article

• In dual boot PC, the boot/GRUB menu suddenly disappeared (Ubuntu option is not appearing anymore)

  - by iammilind

  I have been using Ubuntu 13.04 as my primary OS for quite sometime on Sony VAIO laptop with other OS being windows 8 (never use it). Till today, everything was fine. In the evening I had shut down my PC and closed the lid; Typically I do this when the shutting down screen is still on. But probably this time it was fatal. When I again restarted my PC, now no menu is appearing for selecting OS and it directly goes for Windows 8. My question is similar to this thread, but I don't have Ubuntu CD as I had installed using pen drive sometime back. Is there any (genuine or workaround) easier way to get back the GRUB menu back in the place? Note that keyboard shortcuts in Sony VAIO is different, here I have an "Assist" menu as well to get those internal options.

  Read the article

• Auto-Invoke Update Manager to update everything and shutdown after system idle for x minutes?

  - by unknownthreat

  I have Ubuntu 10.10 installed on a machine for my parents. The thing is they never request updates from Update Manager even the manager itself prompted them so. Moreover, when they are done with whatever they are doing on Ubuntu, they always leave the computer on. And I always have to come back and shut the machine down. Sometimes, the computer even sit idle for hours. So I want to know whether this is possible in Ubuntu. I am thinking of a script that will be activated after the machine is idle for x minutes. When x minutes have elapsed, Update Manager will automatically update everything listed. (I recall that you need the admin password for this, so is there a workaround?) After all the updates are done, the machine will automatically shutdown. Is this possible?

  Read the article

• What are the correct settings for a subdomain in ZoneEdit?

  - by user99572_is_fine

  I want to create a subdomain for a site hosted by Jimdo (a DIY website builder). Jimdo does not allow subdomains however. I am trying to find a workaround where a subdomain is hosted elsewhere but everything else remains as it is. E.g. I use their email service and I want to keep it. The domain is not hosted by Jimdo, but by a host that allows me to edit my zones. It points to the Jimdo NS. I have independent hosting where I have NS information. This is where I want to host my subdomain. My thinking was that I could use ZoneEdit as a "fork" that allows me to keep using my Jimdo page like before and, at the same time, directs a subdomain to another host. Provided this is possible: Question: How do I configure ZoneEdit CNAME or NS records to forward visitors to my website and my email to my Jimdo mail account while pointing a subdomain to another host?

  Read the article

• Cinnamon Settings blank after update

  - by Seth Balmore

  Using Ubuntu 12.04 with the cinnamon desktop, I installed the most recent updates and now when I open "System Settings" the entire window appears as a blank white screen. The headers for APPEARANCE, PREFERENCES, and HARDWARE are present, but the usual icons for *Background, *Hot Corners, *Printers, etc. are no longer visible. Some of these settings can still be altered via the terminal: cinnamon-settings backgrounds cinnamon-settings applets cinnamon-settings mouse and touchpad But other commands, such as cinnamon-settings hot corners are met with an error. This is obviously a problem with cinnamon, so I just want to bring it to attention and find out when they plan on fixing the bug. A workaround can be found on the web, but it seems way to risky to rely on.

  Read the article

• Using HTML entities in XML Literals (Avner Aharoni)

  One of the common use-cases of XML literals is creating HTML. However, HTML entities cannot be used in XML literals since LINQ to XML directly supports only the Data type definitions (DTD) defined in the XML 1.0 spec. You can read more about it here. The workaround is to use the Unicode representation of the entity, although its not as readable as the HTML entities, the output is the same. Here are two examples of HTML entities from the XHTML spec :   Entity...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Using HTML entities in XML Literals (Avner Aharoni)

  One of the common use-cases of XML literals is creating HTML. However, HTML entities cannot be used in XML literals since LINQ to XML directly supports only the Data type definitions (DTD) defined in the XML 1.0 spec. You can read more about it here. The workaround is to use the Unicode representation of the entity, although its not as readable as the HTML entities, the output is the same. Here are two examples of HTML entities from the XHTML spec :   Entity...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Asus 1215n GPU driver/s don't give me a "full" OS experience

  - by AFD

  I'm use to not having specific drivers from a manufacture on my laptop when running a Linux OS and that has always been fine - there's been adequate FOSS drivers for my needs and it hasn't ruined any of my OS experience. When I bought an Asus 1215n one of the upsides to the hardware seemed to be the switchable GPU that could give lots of performance or lots more battery life and would switch on-the-fly... with Windows of course. Seems that the Nvidia driver are crap and people advise not installing them. I have some sort of workaround for vga_switcharoo (?) and the on-the-fly nature of the GPUs has turned in to a manual one :( The worst bit though (aside from shorter battery life) is the web experience with HTML5. If I visit Mozilla's Web O'Wonder site I'm told I don't have WebGL working due to driver issues. This really blows - is it possible that proprietary drivers can now ruin my web experience too?!

  Read the article

• Using glReadBuffer returns black image instead of the actual image only on Intel cards

  - by cloudraven

  I have this piece of code glReadBuffer( GL_FRONT ); glReadPixels( 0, 0, width, height, GL_RGB, GL_UNSIGNED_BYTE, buffer ); Which works just perfectly in all the Nvidia and AMD GPUs I have tried, but it fails in almost every single Intel built-in video that I have tried. It actually works in a very old 945GME, but fails in all the others. Instead of getting a screenshot I am actually getting a black screen. If it helps, I am working with the Doom3 Engine, and that code is derived from the built-in screen capture code. By the way, even with the original game I cannot do screen capture on those intel devices anyway. My guess is that they are not implementing the standard correctly or something. Is there a workaround for this?

  Read the article

• Laptop in-built Web Cam stopped working HP Probook

  - by Dave A

  My laptop (HP Probook) webcam has always worked. When I upgraded to 13.10 it stopped working. No solution found then so gave up. Recently upgraded to 14.04 still not working so thought I would ask anyone again if a solution had been found. lsusb Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera dmesg | grep uvcvideo` [ 765.466575] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 765.467305] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 765.467954] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 765.467960] uvcvideo: Failed to initialize the device (-5). [ 765.468022] usbcore: registered new interface driver uvcvideo Tried searching everywhere but there does not appear to be any clear solution to the driver issue - very weird as my camera is listed as supported by uvcvideo and it has always worked.

  Read the article

• /etc/profile not being sourced

  - by Marc

  For 11.04, I did a fresh install of my system. Part of that install was to install rvm, which sticks a rvm.sh in /etc/profile.d/. This doesn't work as /etc/profile (which loads each +r in /etc/profile.d/*.sh) is not being loaded. According to the documentation, the profile is only sourced if bash is run in login. To verify this, I invoked bash --login, after which rvm was available. This has worked for me in previous versions of Ubuntu without any configuration. That is, a fresh install of 10.10 will correctly source profile/.d. My question is: is there anything I'm doing wrong, or are there some new assumptions being made in Natty that have broken this? My current workaround is to source /etc/profile in ~/.bashrc (which is awful as profile is meant to load before bashrc's, but does the trick).

  Read the article

• Using glReadBuffer/glReadPixels returns black image instead of the actual image only on Intel cards

  - by cloudraven

  I have this piece of code glReadBuffer( GL_FRONT ); glReadPixels( 0, 0, width, height, GL_RGB, GL_UNSIGNED_BYTE, buffer ); Which works just perfectly in all the Nvidia and AMD GPUs I have tried, but it fails in almost every single Intel built-in video that I have tried. It actually works in a very old 945GME, but fails in all the others. Instead of getting a screenshot I am actually getting a black screen. If it helps, I am working with the Doom3 Engine, and that code is derived from the built-in screen capture code. By the way, even with the original game I cannot do screen capture on those intel devices anyway. My guess is that they are not implementing the standard correctly or something. Is there a workaround for this?

  Read the article

• Gzip compress offline?

  - by shoosh

  I've configured my site to serve compressed content by putting this line in .htaccess AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript text/css application/javascript application/json This works perfectly for almost all files except a few large JSON files that are above 200Kb. For some reason they are not being compressed. I see that they don't using the net tab in firebug and the Network section in chrome. So as a workaround I thought I could compress these files offline and have Apache read them compressed. What tool should I use to compress them? is the linux gzip the one? any special flags or something I should use? What should I put in .htaccess so that the server would know to serve these files with content-encoding gzip ?

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >