Search Results

Search found 9332 results on 374 pages for 'an original alias'.

Page 180/374 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• greengeeks drupal install imagemagik 'path /usr/bin/convert' does not exists error

  - by letapjar

  I just signed up with greengeeks. I have a drupal install (6.19) on my public_html directory. The ImageMagic Toolkit can't find the binary - the error I get is "the path /usr/bin/convert" does not exist. when I use a terminal and do 'which convert' it shows /usr/bin/convert also, I have a second drupal install in an addon domain - it's home directory is above the public_html directory (in a directory called '/home/myusername/addons/seconddomain') The drupal install in the addon domain finds the imagemagick binary just fine. I am at a total loss as to why the original install cannot find the binary. The tech support guys at greengeeks have no clue either. Any ideas of things to try?

  Read the article

• Reply to mailman archived message

  - by Jasper

  (not exactly sure if this is the right place for this question, but I trust you will migrate it if it isn't) I was having a problem with gdb, and while there issue appears to be recurring, I found only one instance of someone recently experiencing the same problem. I found this other instance on a mailman archived mailing list. Then I tried some more things and finally solved the issue with gdb. So, now I want to report back the solution I found to the mailing list. However, this is really only of use if mailman recognizes my mail as being the same thread as the original problem, but I do not have that mail (just the online archived version of it) so I cannot reply to it. My question: How can I make sure mailman considers my mail as a reply to that thread? Is simply copying the topic enough?

  Read the article

• Cloning a Windows server with VMWare ESXi without domain membership conflicts

  - by Brad

  We are using VMWare ESXi 3.5, and have found it quite useful for cloning a live server to then use the virtualized version to test/practice software upgrades. The trouble is, when the virtualized version fires up, it registers itself on our domain (Active Directory), causing the original server to no longer be accessible via Windows shares. The fix is to remove the virtualized version from the domain, configuring it to use a workgroup instead, deleting the Computer account in AD, and then removing the real server from the domain and re-adding it. Is there a better procedure? Note, we cannot simply disconnect the virtual network from the virtualized server, as it needs to be connected to the network to actually be removed from the domain.

  Read the article

• Postfix issues sending mail to addresses under domain located on server

  - by iamthewit

  I recently installed virtualmin on my nice shiny new rackspace cloud. Everything went seemlessly but I've been having some issues getting emails to send properly. The problem seems to be that the server can not send mail to email addresses where the domain is owned by my server. For example, on my server I run multiple virtual domains, lets call this one test.com. When I run the mail command from shell (mail [email protected]) I get the following back from my maillog: Oct 6 14:55:18 test postfix/pickup[8737]: DC1131612CC: uid=0 from= Oct 6 14:55:18 test postfix/cleanup[8769]: DC1131612CC: [email protected] Oct 6 14:55:18 test postfix/qmgr[8738]: DC1131612CC: [email protected], size=353, nrcpt=1 (queue active) Oct 6 14:55:18 test postfix/error[8771]: DC1131612CC: [email protected], relay=none, delay=0, delays=0/0/0/0, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Oct 6 14:55:18 test postfix/cleanup[8769]: DD07D1612D1: [email protected] Oct 6 14:55:18 test postfix/bounce[8772]: DC1131612CC: sender non-delivery notification: DD07D1612D1 Oct 6 14:55:18 test postfix/qmgr[8738]: DD07D1612D1: from=<, size=2268, nrcpt=1 (queue active) Oct 6 14:55:18 test postfix/qmgr[8738]: DC1131612CC: removed Oct 6 14:55:18 test postfix/local[8773]: DD07D1612D1: [email protected], relay=local, delay=0.03, delays=0/0/0/0.03, dsn=2.0.0, status=sent (delivered to command: /usr/bin/procmail-wrapper -o -a $DOMAIN -d $LOGNAME) Oct 6 14:55:18 test postfix/qmgr[8738]: DD07D1612D1: removed when I run mail [email protected] the message is sent and received perfectly fine. I'm a bit of a noob when it comes to servers, but I pick things up fairly quickly, so please excuse any incorrect terminology and my general noobiness. Any help would be greatly appreciated, I've been googling for quite a while but I haven't found a solution yet, I'll add a copy of my main.cf file in a response below cheers guys here is the reformatted postconf, do you want the reformatted main.cf file too, or is this enough? alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no mailbox_command = /usr/bin/procmail-wrapper -o -a $DOMAIN -d $LOGNAME mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man myhostname = server.test.com newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sender_bcc_maps = hash:/etc/postfix/bcc sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual

  Read the article

• Set preferred language in Chrome and other Google services

  - by Super Chicken

  Whenever I'm abroad and access Google's search (via Chrome browser, on my own laptop) or other Google services, they are presented to me in the local language. How can I get Google services displayed in English and instruct Chrome to use google.com (instead of the country-specific site)? My language setting in Windows is English, so Chrome should already use this by default, and I've also set my language preference in iGoogle to English (U.S.), yet if I'm in France, for example, my searches take place on google.fr and sites like the Google News are in French. Chrome tries to be helpful by suggesting to translate these pages for me, but it would be far better to direct to the original English version of these sites in the first place. How do I fix this?

  Read the article

• How do I stop track changes from turning on automatically in Word 2007

  - by Benj

  Whenever I open an existing document in Word 2007 (on Windows XP), word turns on track changes, and changes the display mode to "Final" (that is, not "Final Showing Markup" -- so I often don't even notice track changes is on if I don't remember to pay attention. This happens for ALL existing documents, and doesn't happen for new documents. I can't find any option in the configuration that would control this behavior. I would like to restore the original/default behavior where documents are opening with Track Changes off, and in "Final showing markup" display. Steps to Reproduce Open Word 2007. Create a new document. Verify that track changes is off. Save the document and close Word. Open the document (either directly or through Word). Track changes is now on. Any ideas?

  Read the article

• Resizing partition in VMware Fusion didn't work

  - by Robot

  I migrated a Parallels VM to VMware Fusion. That worked well, although the original partition size was way too small (8GB). Following some instructions from VMware, I used the Fusion GUI to extend the size of the disk to 20GB, and then I booted from a GPartEd LiveCD to grow the C: partition to the full 20GB. That seemed to work, and I can see that the disk is 20GB in Disk Manager, but it still thinks the actual partition is 8GB. Here is a screenshot of it. What can I do to get the entire 20GB usable?

  Read the article

• Word 2010 - Styled paragraph separating into separate numbered lines

  - by chez

  USING WORD 2010 I have a style "Heading 4 Par" which is a style based on Heading 4. It is a numbered style. My problem is when I apply the "Heading 4 Par" to say a 3 lined paragraph it separates each of the lines in the paragraph and numbers it. I always show the formatting characters and as far as I can see there is only ONE paragraph mark situated at the end of what is supposed to be a paragraph. eg. Original: 7.4 Text.... text con't..... Text... After Applying Format: 7.4 Text... 7.4 text con't... 7.4 text con't. After I've applied the format it behaves as though each line should be the start of a new paragraph but there is no paragraph mark to show this. This is driving me crazy! Help!

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• What does dd conv=sync,noerror do?

  - by dding

  So what is the case when adding conv=sync,noerror makes a difference when backing up an entire hard disk onto an image file? Is conv=sync,noerror a requirement when doing forensic stuff? If so, why is it the case with reference to linux fedora? Edit: OK, so if I do dd without conv=sync,noerror, and dd encounters read error when reading the block (let's size 100M), does dd just skip 100M block and reads the next block without writing something (dd conv=sync,noerror writes zeros to 100M of output - so what about this case?)? And if is hash of original hard disk and output file different if done without conv=sync,noerror? Or is this only when read error occurred?

  Read the article

• OSX Mail.app send only plaintext but read as html

  - by bawkstoo

  I get email which seems properly plaintext formatted, but when I forward it out, the font size ends up being enormous and a few other formatting stupidities. So I tried the following: defaults write com.apple.mail PreferPlainText -bool TRUE And this works great, all outgoing email regardless of the text original is plaintext only, just the way I like it. But now for incoming email only the plaintext portions are available to read without going into View - Message - Raw Source (or something similar to that). Does anyone know how I can force only outgoing mail to include only plaintext, but continue to read incoming mail in the formatting it was intended?

  Read the article

• How to determine non-movable files in Windows 7?

  - by David

  Is there a way to determine which unmovable files are preventing Shrink Volume from releasing the full potential free space? Background: I have a 90 GB partition with Windows 7 on it, and 60 GB free space. I want to shrink it down to about 40 GB, and use the reclaimed 50 GB for a separate data partition. The Shrink Volume tool in Disk Management is only willing to give me 8 GB back. My understanding is that this is because of immovable files. I've followed the instructions found here, which involved disabling hibernation, pagefile, system restore, kernal dump, making sure all related files were deleted, and defrag'ing. I have successfully followed those same instructions before on this same drive, and partitoned the original 150 GB space into 90 GB and 60 GB, but I'm not so lucky this time.

  Read the article

• Windows 2003 Server - Can I map a folder to another folder on the same server?

  - by TheCleaner

  Scenario: I have a server that was running low on space. We have an external iscsi SAN that it now has a LUN on and connected to the server as E:\ We are moving the PHOTOS folder from the old location on D:\ to the new E:. That new drive is being shared out as "ARCHIVE". So: \server\shared\photos now becomes \server\archive\photos I can easily place a shortcut in the original location saying "DOUBLE CLICK HERE FOR THE PHOTOS", but it isn't ideal. What I'd like is to be able to have \server\shared\photos simply point to \server\archive\photos. So that if someone wants to map a drive to \server\shared and then browse to the photos folder once in there they will see what is in the \server\archive\photos location. Is that possible? I was thinking about SUBST or DFS, but I don't think either of those will do it.

  Read the article

• Any FTP clients for Mac OS X that support upload via temporary filename?

  - by Chris582

  Hi, does anybody know of a FTP client (for Mac OS X) that supports uploading to a temporary filename? When overwriting a file on the server, most FTP clients first empty the file and then proceed to upload new content. (Which is how FTP is supposed to work, so everything is fine.) However, what I would like to see is that the FTP client uploads content to a temporary file and once all the content is on the server, replaces original file. This is good feature, because existing file is upgraded almost instantaneously; otherwise, it would be "broken" while the upload is still in progress. On Windows, this feature is available in WinSCP, but I have not found any options for Mac, so far. Any recommendations?

  Read the article

• rsync osx to linux

  - by Nick

  I did a backup to a remote nfs folder with rsync, from a MAC to a Remote Debian. The final backup is 58GB less than the original. Rsync says that everything was OK, and nothing to update. Macintosh:/Volumes/Data1 root# du -sh Produccion/ 319G Produccion/ root@Disketera:/mnt/soho_storage/samba/shares# du -sh Produccion/ 260G Produccion/ can I trust in rsync? I'm using rsync -av --stats /Volumes/Data1/Produccion/ /mnt/red/ (/mnt/red is my samba mountpoint) Some differents folders root@Disketera:/mnt/soho_storage/samba/shares/Produccion/tiposok# du -sh * 0 IndoSanBol 0 IndoSans-Bold 0 IndoSans-Italic 0 IndoSans-Light 0 IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 12K TCL IndoSans_mac Macintosh:/Volumes/Data1/Produccion/tiposok root# du -sh * 36K IndoSanBol 40K IndoSans-Bold 36K IndoSans-Italic 36K IndoSans-Light 36K IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 160K TCL IndoSans_mac

  Read the article

• Scheduling VMWare ESXi 4.1 VM Restart

  - by Robin Day

  We had a virtual machine running on a VMWare Server host on Windows Server 2003. The machine is set up with non persistent disks. We had a windows task schedule set up that ran a batch file to reset the machine each week so that it returned to it's original state. The batch file that we had running was: "C:\Program Files\VMware\VMware Server\vmware-cmd" "C:\Virtual Machines\VirtualMachineName\VirtualMachineName.vmx" stop hard "C:\Program Files\VMware\VMware Server\vmware-cmd" "C:\Virtual Machines\VirtualMachineName\VirtualMachineName1.vmx" start We have since migrated this machine to the free version of ESXi 4.1. Can anyone let me know if and how it is possible to schedule such a restart?

  Read the article

• Handout export to word from PowerPoint are too big :(

  - by nickjohn

  EDITED i am using power point lectures. i want to mail merge speaker data into the respective lecture. now thats not possible with ppt as far i know, so i have to convert these lectures to handout by using power point option "publishMS word handouts" and use word mail merger. this is good since it will keep the comments/notes added in slides in handouts aswell. but these exported handouts in word remain actual slides and retain link to original ppt rather than simply get exported as images. so the file size gets verrry big 10mb ppt = 212mb doc=88mb docx Is there any option to convert handouts exported from power point to word as images? i simply cant save them as pngs from powerpoint since that will not include the comments data. Thanks

  Read the article

• Apache - The name

  - by Joshua Enfield

  I am working on a migration to a newer virtualized server. The old one has Apache 2.2.4 according to the old servers phpinfo(). The new one with the most up to date has 2.2.3. How can this be assuming no trickery is involved? The old one is years old. A lot of the guides I reference use apache2 in folders names and many of the conventions. The newest version of things, as I understand it is called httpd. Did apache change the name from what it originally was? (i.e. break the web server component into its own project called httpd, I realize the original daemon was probably still called httpd)

  Read the article

• PHP-FPM performing worse than mod_php

  - by lordstyx

  Recently the website I maintain has been growing a lot and I saw the point coming where I'd want to switch from apache to nginx, because I kept on reading that it performs way better. Now I've done the switch, and I have to say, nginx is keeping up just fine. However, php-fpm is forming a problem. Where the php pages used to take 0.1 second to generate with the same load they now take around 3 seconds! Furthermore the error.log from nginx is being spammed with errors like: upstream timed out (110: Connection timed out) while connecting to upstream, client: ... I also tried using unix sockets instead, but those would complain about the following: connect() to unix:/tmp/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream I've fiddled with settings here and there but nothing seems to work. Changing the amount of pm.max_children doesn't seem to help a lot either, but with it's current amount at 350 it seems to be the lesser of all evil. The server that's being used has 3 GB RAM (not all of it is free due to a MySQL server also running) along with 2 dual-core processors (4 cores in total). Am I doing something majorly wrong with the settings here, or is the server simply not capable enough? EDIT: Here is the nginx server block server { listen 80; listen [::]:80 default ipv6only=on; root /var/www; index index.php index.html index.htm; server_name localhost; location / { try_files $uri $uri/ /index.html; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } location = /50x.html { root /usr/share/nginx/www; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini try_files $uri = 404; # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } location ~ /\.ht { deny all; } } And the php-fpm pool: [www] user = www-data group = www-data listen = 127.0.0.1:9000 ;listen = /tmp/php5-fpm.sock listen.backlog = -1 pm = dynamic pm.max_children = 350 pm.start_servers = 200 pm.min_spare_servers = 10 pm.max_spare_servers = 350 pm.max_requests = 1536 rlimit_files = 65536 rlimit_core = unlimited chdir = /

  Read the article

• Modifying the install environment for RH-like installations

  - by javanix

  I am trying to modify the basic installation environment (ie, what Anaconda runs in) for a customized CentOS distribution. For the first try, I would just like to modify a few of the splash images. My initial attempt to do this entailed: 1) Mount images/install.img to a directory ~/img/ 2) Copy all files from img/ to ~/tmpimg/ 3) Modify the splash images 4) mkisofs -o ~/final/install.img 5) cp ~/final/install.img back to my ~/cdroot/ folder and remake the iso. However, the generated .img in step 4 doesn't even come close to matching the file size from the original install.img (meaning that install.img must be created in some other fashion using compression), and it fails when I boot my iso. What settings should I be using to make the install.img file? Is there some other technique for modifying CentOS install environments?

  Read the article

• Quake 3 won't install on Windows 7

  - by Ernest Friedman-Hill

  Today I tried to install Quake 3 from my original 1999 CD on a Windows 7 laptop. Windows 7 resolutely refused to run the installer, helpfully explaining that I might need a 32- or 64-bit version, depending on what my OS is (you have to love those Windows error messages: absolutely correct, but as unhelpful as humanly possible). In any case, of course the 1999 software is 32-bit, and the laptop is 64-bit. But I was pretty sure that 64-bit Windows versions could handle running 32-bit software. What gives?

  Read the article

• Why does my Mac address reset after reconnecting?

  - by Mr.Student

  I have ubuntu 12. I'm changing my mac address with ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx which works. However when I restart my connection my computer resets my mac to my original mac address. I'm guessing that this happens because something calls... ifconfig wlan0 down ... do something before connecting ifconfig wlan0 up ... connect to designated access point I want my mac address to however be the same no matter how many times I disconnect and reconnect, whether to another network or the same one. Also it would be nice to turn off the auto-connect feature for my network-manager with out having to edit each individual connection. Lastly I would like to know how to connect to a wifi network through the terminal and not via gui network manager ubuntu provides.

  Read the article

• Can font substitutions in MS Word be controlled?

  - by Jukka K. Korpela

  Suppose that I am typing text in MS Word (any version) and I enter a character that does not exist in the font being used. Say, I’m using Times New Roman and I type 2300 Alt X, which turns to the diameter sign “?”, which does not exist in Times New Roman. MS Word picks it up from a different font, like Arial Unicode MS. This may mess up the typographic style, or line spacing. And this happens without notice. Perhaps the most inconvenient feature here is that MS Word does not automatically return to the original font. Subsequent text appears in the replacement font, unless the user sees what is happening and realizes that he needs to change the font. The question is: Can such substitutions be controlled, e.g. by specifying the font(s) to be used as backup fonts? If not, is there any reliable documentation about it?

  Read the article

• Apache2 Virtual Host broken; displayed default index.html on subdomain, but correct content on www.subdomain

  - by Robert K

  I've got a Linode configured as a Ubuntu 10.04.2 web server with Apache 2.2.14. I have a total of 4 sites, all defined under /etc/apache2/sites-available as virtual hosts. All sites are almost identical clones for configuration. And all sites but my last work successfully. default: (www.)exampleadnetwork.com (www.)example.com reseller.example.com trouble: client1.example.com I keep getting this page when I visit the client1.example.com site: It works! This is the default web page for this server. The web server software is running but no content has been added, yet. In my ports.conf file I have the NameVirtualHost correctly set to my IP address on port 80. If I access the "www.sub.example.com" alias the site works! If I access it without the www I see the "It Works" excerpt posted above. Even apache2ctl -S shows that my vhost file parses correctly and is added to the mix. My vhost configuration file is as follows: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName client1.example.com ServerAlias client1.example.com www.client1.example.com DocumentRoot /srv/www/client1.example.com/public_html/ ErrorLog /srv/www/client1.example.com/logs/error.log CustomLog /srv/www/client1.example.com/logs/access.log combined <directory /srv/www/client1.example.com/public_html/> Options -Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </directory> </VirtualHost> The other sites are variations of: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName example.com ServerAlias example.com www.example.com DocumentRoot /srv/www/example.com/public_html/ ErrorLog /srv/www/example.com/logs/error.log CustomLog /srv/www/example.com/logs/access.log combined </VirtualHost> The only site the differs is the other subdomain: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName reseller.example.com ServerAlias reseller.example.com DocumentRoot /srv/www/reseller.example.com/public_html/ ErrorLog /srv/www/reseller.example.com/logs/error.log CustomLog /srv/www/reseller.example.com/logs/access.log combined </VirtualHost> Filenames are the FQDN without the www. prefix. I've followed this advice, but still cannot access subdomain properly.

  Read the article

• Nginx Reverse Proxy Node.js and Wordpress + Static Files Issue

  - by joemccann

  I have had quite a time trying to get nginx to serve static assets from my wordpress blog. Have a look at the config and let me know if you can help. ( https://gist.github.com/1130332 - to see the entire thing) server { listen 80; server_name subprint.com; access_log /var/www/subprint/logs/access.log; error_log /var/www/subprint/logs/error.log; root /var/www/subprint/server/public; # express serves static resources for subprint.com out of here location / { proxy_pass http://127.0.0.1:8124; root /var/www/subprint/server; access_log on; } #serve static assets location ~* ^(?!\/).+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|pdf|txt|tar|wav|bmp|rtf|js|flv|swf|html|htm)$ { expires max; access_log off; } # the route for the wordpress blog # unfortunately the static assets (css, img, etc.) are not being pathed/served properly location /blog { root /var/www/localhost/public; index index.php; access_log /var/www/localhost/logs/access.log; error_log /var/www/localhost/logs/error.log; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } if (!-f $request_filename) { rewrite /blog$ /blog/index.php last; break; } } # actually serves the wordpress and subsequently phpmyadmin location ~* (?!\/blog).+\.php$ { fastcgi_pass localhost:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/localhost/public$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } # This works fine, but ONLY with a symlink inside the /var/www/localhost/public directory pointing to /usr/share/phpmyadmin location /phpmyadmin { index index.php; access_log /var/www/phpmyadmin/logs/access.log; error_log /var/www/phpmyadmin/logs/error.log; alias /usr/share/phpmyadmin/; if (!-f $request_filename) { rewrite /phpmyadmin$ /phpmyadmin/index.php permanent; break; } } # opt-in to the future add_header "X-UA-Compatible" "IE=Edge,chrome=1"; }

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >