Search Results

Search found 6144 results on 246 pages for 'ignore arguments'.

Page 180/246 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

  • Concurrent Affairs

    - by Tony Davis
    I once wrote an editorial, multi-core mania, on the conundrum of ever-increasing numbers of processor cores, but without the concurrent programming techniques to get anywhere near exploiting their performance potential. I came to the.controversial.conclusion that, while the problem loomed for all procedural languages, it was not a big issue for the vast majority of programmers. Two years later, I still think most programmers don't concern themselves overly with this issue, but I do think that's a bigger problem than I originally implied. Firstly, is the performance boost from writing code that can fully exploit all available cores worth the cost of the additional programming complexity? Right now, with quad-core processors that, at best, can make our programs four times faster, the answer is still no for many applications. But what happens in a few years, as the number of cores grows to 100 or even 1000? At this point, it becomes very hard to ignore the potential gains from exploiting concurrency. Possibly, I was optimistic to assume that, by the time we have 100-core processors, and most applications really needed to exploit them, some technology would be around to allow us to do so with relative ease. The ideal solution would be one that allows programmers to forget about the problem, in much the same way that garbage collection removed the need to worry too much about memory allocation. From all I can find on the topic, though, there is only a remote likelihood that we'll ever have a compiler that takes a program written in a single-threaded style and "auto-magically" converts it into an efficient, correct, multi-threaded program. At the same time, it seems clear that what is currently the most common solution, multi-threaded programming with shared memory, is unsustainable. As soon as a piece of state can be changed by a different thread of execution, the potential number of execution paths through your program grows exponentially with the number of threads. If you have two threads, each executing n instructions, then there are 2^n possible "interleavings" of those instructions. Of course, many of those interleavings will have identical behavior, but several won't. Not only does this make understanding how a program works an order of magnitude harder, but it will also result in irreproducible, non-deterministic, bugs. And of course, the problem will be many times worse when you have a hundred or a thousand threads. So what is the answer? All of the possible alternatives require a change in the way we write programs and, currently, seem to be plagued by performance issues. Software transactional memory (STM) applies the ideas of database transactions, and optimistic concurrency control, to memory. However, working out how to break down your program into sufficiently small transactions, so as to avoid contention issues, isn't easy. Another approach is concurrency with actors, where instead of having threads share memory, each thread runs in complete isolation, and communicates with others by passing messages. It simplifies concurrent programs but still has performance issues, if the threads need to operate on the same large piece of data. There are doubtless other possible solutions that I haven't mentioned, and I would love to know to what extent you, as a developer, are considering the problem of multi-core concurrency, what solution you currently favor, and why. Cheers, Tony.

    Read the article

  • How can I get TFS2010 to run MSDEPLOY for me through MSBUILD?

    - by Simon_Weaver
    There is an excellent PDC talk available here which describes the new MSDEPLOY features in Visual Studio 2010 - as well as how to deploy an application within TFS. You can use MSBUILD within TFS2010 to call through to MSDEPLOY to deploy your package to IIS. This is done by means of parameters to MSBUILD. The talk explains some of the command line parameters such as : /p:DeployOnBuild /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=True /p:MSDeployPublishMethod=InProc /p:MSDeployServiceURL=localhost /p:DeployIISAppPath="Default Web Site" But where is the documentation for this - I can't find any? I've been spending all day trying to get this to work and can't quite get it right and keep ending up with various errors. If I run the package's cmd file it deploys perfectly. But I want to get the whole deployment running through msbuild using these arguments and not a separate call to msdeploy or running the package .cmd file. How can I do this? PS. Yes I do have the Web Deployment Agent Service running. I also have the management service running under IIS. I've tried using both. Args I'm using : /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:Configuration=Release /p:CreatePackageOnPublish=True /p:DeployIisAppPath=staging.example.com /p:MsDeployServiceUrl=https://staging.example.com:8172/msdeploy.axd /p:AllowUntrustedCertificate=True giving me : C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (2660): VsMsdeploy failed.(Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) Error detail: Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (401) Unauthorized.

    Read the article

  • MSDeploy doesn't deploy to remote server using MSBuild and Visual Studio 2010

    - by user317762
    I'm currently running Visual Studio Team System 2010 RC and I'm trying to get the Build Service setup to build my solution and deploy 3 web applications in it. I've created a custom build configuration called Integration and I've setup the "IIS Web site/application name to use on the destination server" on the Package/Publish tab of the Properties for each of the web applications. In my Build Definition I've set the following arguments: /p:DeployOnBuild=True /p:DeployTarget=MSDeployPublish /p:MSDeployPublishMethod=InProc /p:MsDeployServiceUrl=http://my-server-name:8172/msdeploy.axd /p:EnablePackageProcessLoggingAndAssert=True However, when I run the build I get the following error, for all three web applications: Updating setAcl (RightContent). C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets(3481,5): error : Web deployment task failed. (Attempted to perform an unauthorized operation.) I don't think this is my actual problem though. This error is occuring after the following entry in the log: Updating setAcl This is what's causing the error message, but it appears that MSDeploy is trying to deploy to the local IIS on the Build server, not the server I specified with the MsDeployServiceUrl parameter. After looking at the targets file at C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets, I added the EnablePackageProcessLoggingAndAssert, which adds extra logging. The log shows an emptry string for the value of MsDeployServiceUrl. I also noticed in the target that MsDeployServiceUrl has a lowercase s, which is somewhat confusing because the task name MSDeployPublish has an uppercase S. I tried using it using uppercase, then again using lowercase, but neither worked. A couple other things to note: My build service is running as NETWORK SERVICE. The server I'm trying to deploy to is on another domain. I also tried adding /p:username=mydomain\myusername /p:password=mypassword to the MSBuild paramter list, but that didn't help. Does anyone know if I'm supplying the correct parameters? Or provide me with the correct ones? Thanks

    Read the article

  • Using Perl WWW::Facebook::API to Publish To Facebook Newsfeed

    - by Russell C.
    We use Facebook Connect on our site in conjunction with the WWW::Facebook::API CPAN module to publish to our users newsfeed when requested by the user. So far we've been able to successfully update the user's status using the following code: use WWW::Facebook::API; my $facebook = WWW::Facebook::API->new( desktop => 0, api_key => $fb_api_key, secret => $fb_secret, session_key => $query->cookie($fb_api_key.'_session_key'), session_expires => $query->cookie($fb_api_key.'_expires'), session_uid => $query->cookie($fb_api_key.'_user') ); my $response = $facebook->stream->publish( message => qq|Test status message|, ); However, when we try to update the code above so we can publish newsfeed stories that include attachments and action links as specified in the Facebook API documentation for Stream.Publish, we have tried about 100 different ways without any success. According to the CPAN documentation all we should have to do is update our code to something like the following and pass the attachments & action links appropriately which doesn't seem to work: my $response = $facebook->stream->publish( message => qq|Test status message|, attachment => $json, action_links => [@links], ); For example, we are passing the above arguments as follows: $json = qq|{ 'name': 'i\'m bursting with joy', 'href': ' http://bit.ly/187gO1', 'caption': '{*actor*} rated the lolcat 5 stars', 'description': 'a funny looking cat', 'properties': { 'category': { 'text': 'humor', 'href': 'http://bit.ly/KYbaN'}, 'ratings': '5 stars' }, 'media': [{ 'type': 'image', 'src': 'http://icanhascheezburger.files.wordpress.com/2009/03/funny-pictures-your-cat-is-bursting-with-joy1.jpg', 'href': 'http://bit.ly/187gO1'}] }|; @links = ["{'text':'Link 1', 'href':'http://www.link1.com'}","{'text':'Link 2', 'href':'http://www.link2.com'}"]; The above, nor any of the other representations we tried seem to work. I'm hoping some other perl developer out there has this working and can explain how to create the attachment and action_links variables appropriately in Perl for posting to the Facebook news feed through WWW::Facebook::API. Thanks in advance for your help!

    Read the article

  • Installing an exe with Powershell DSC Package resource gets return code 1619

    - by Jay Spang
    I'm trying to use Powershell DSC's Package resource to install an exe... Perforce's P4V to be specific. Here's my code: Configuration PerforceMachine { Node "SERVERNAME" { Package P4V { Ensure = "Present" Name = "Perforce Visual Components" Path = "\\nas\share\p4vinst64.exe" ProductId = '' Arguments = "/S /V/qn" # args for silent mode LogPath = "$env:ProgramData\p4v_install.log" } } } When running this, this is the error Powershell gives me: PowerShell provider MSFT_PackageResource failed to execute Set-TargetResource functionality with error message: The return code 1619 was not expected. Configuration is likely not correct + CategoryInfo : InvalidOperation: (:) [], CimException + FullyQualifiedErrorId : ProviderOperationExecutionFailure + PSComputerName : SERVERNAME According to documentation, return code 1619 means the MSI package couldn't be opened. However, when I manually log in to the machine and run "\\nas\share\p4vinst64.exe /S /V/qn", the install works flawlessly. Does anyone know why this is failing? Alternately, can anyone tell me how to troubleshoot this? I pasted all the error information I got from the terminal, my log file (p4v_install.log) is a 0 byte file, and there are no events in the event viewer. I don't know how to troubleshoot it any further! EDIT: I should note that I also tried using the File resource to copy the file locally, and then install it from there. Sadly, that met with the same result.

    Read the article

  • A call to PInvoke function '[...]' has unbalanced the stack

    - by Sanctus2099
    Hey I'm getting this weird error on some stuff I've been using for quite a while. It may be a new thing in Visual Studio 2010 but I'm not sure. I'm trying to call a unamanged function written in C++ from C#. From what I've read on the internet and the error message itself it's got something to do with the fact that the signature in my C# file is not the same as the one from C++ but I really can't see it. First of all this is my unamanged function below: TEngine GCreateEngine(int width,int height,int depth,int deviceType); And here is my function in C#: [DllImport("Engine.dll", EntryPoint = "GCreateEngine", CallingConvention = CallingConvention.StdCall)] public static extern IntPtr CreateEngine(int width,int height,int depth,int device); When I debug into C++ I see all arguments just fine so thus I can only think it's got something to do with transforming from TEngine (which is a pointer to a class named CEngine) to IntPtr. I've used this before in VS2008 with no problem. I hope my problem is clear enough for you guys to understand.

    Read the article

  • WPF MenuItem IsChecked Binding not working

    - by Kaya
    Anyone know why the menu item binding does not work ? <ToggleButton Name="toggleButton" Checked="checkBoxPublish_Checked" > <ToggleButton.Resources> <converters:BooleanToHiddenVisibility x:Key="boolToVis"/> </ToggleButton.Resources> <Grid> <Image Height="auto" HorizontalAlignment="Left" Margin="5" Name="image1" Stretch="Fill" VerticalAlignment="Top" Width="auto" /> <Viewbox > <TextBlock Text="Blocked" Opacity="0.7" Foreground="Red" Visibility="{Binding Path=IsChecked, ElementName=toggleButton, Converter={StaticResource boolToVis}}"/> </Viewbox> </Grid> <ToggleButton.ContextMenu> <ContextMenu StaysOpen="True" > <MenuItem x:Name="menuItemBlock" Header="Block" Click="menuItemClick" IsCheckable="True" IsChecked="{Binding ElementName=toggleButton, Path=IsChecked}"/> <MenuItem x:Name="menuItemIgnorePtz" Header="Ignore Ptz" Click="menuItemClick" IsCheckable="True" /> </ContextMenu> </ToggleButton.ContextMenu> </ToggleButton>

    Read the article

  • Using Visual Studio 2008 to Assemble, Link, Debug, and Execute MASM 6.11 Assembly Code

    - by Kreychek
    I would like to use Visual Studio 2008 to the greatest extent possible while effectively compiling/linking/building/etc code as if all these build processes were being done by the tools provided with MASM 6.11. The exact version of MASM does not matter, so long as it's within the 6.x range, as that is what my college is using to teach 16-bit assembly. I have done some research on the subject and have come to the conclusion that there are several options: Reconfigure VS to call the MASM 6.11 executables with the same flags, etc as MASM 6.11 would natively do. Create intermediary batch file(s) to be called by VS to then invoke the proper commands for MASM's linker, etc. Reconfigure VS's built-in build tools/rules (assembler, linker, etc) to provide an environment identical to the one used by MASM 6.11. Option (2) was brought up when I realized that the options available in VS's "External Tools" interface may be insufficient to correctly invoke MASM's build tools, thus a batch file to interpret VS's strict method of passing arguments might be helpful, as a lot of my learning about how to get this working involved my manually calling ML.exe, LINK.exe, etc from the command prompt. Below are several links that may prove useful in answering my question. Please keep in mind that I have read them all and none are the actual solution. I can only hope my specifying MASM 6.11 doesn't prevent anyone from contributing a perhaps more generalized answer. Similar method used to Option (2), but users on the thread are not contactable: http://www.codeguru.com/forum/archive/index.php/t-284051.html (also, I have my doubts about the necessity of an intermediary batch file) Out of date explanation to my question: http://www.cs.fiu.edu/~downeyt/cop3402/masmaul.html Probably the closest thing I've come to a definitive solution, but refers to a suite of tools from something besides MASM, also uses a batch file: http://www.kipirvine.com/asm/gettingStarted/index.htm#16-bit I apologize if my terminology for the tools used in each step of the code - exe process is off, but since I'm trying to reproduce the entirety of steps in between completion of writing the code and generating an executable, I don't think it matters much.

    Read the article

  • How to Loop through LINQ results (VB.NET)

    - by rockinthesixstring
    I've got some code to try and loop through LINQ results, but it doesn't seem to be working. HERE'S THE CODE Public Sub ProcessRequest(ByVal context As System.Web.HttpContext) Implements System.Web.IHttpHandler.ProcessRequest ' the page contenttype is plain text' HttpContext.Current.Response.ContentType = "text/plain" ' store the querystring as a variable' Dim qs As Nullable(Of Integer) = Integer.TryParse(HttpContext.Current.Request.QueryString("ID"), Nothing) ' use the RegionsDataContext' Using RegionDC As New DAL.RegionsDataContext 'create a (q)uery variable' Dim q As Object ' if the querystring PID is not blank' ' then we want to return results based on the PID' If Not qs Is Nothing Then ' that fit within the Parent ID' q = (From r In RegionDC.bt_Regions _ Where r.PID = qs _ Select r.Region).ToArray ' now we loop through the array' ' and write out the ressults' For Each item As DAL.bt_Region In q HttpContext.Current.Response.Write(item.Region & vbCrLf) Next End If End Using End Sub HERE'S THE ERROR Public member 'Region' on type 'String' not found. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MissingMemberException: Public member 'Region' on type 'String' not found. Source Error: Line 33: ' and write out the ressults Line 34: For Each item In q Line 35: HttpContext.Current.Response.Write(item.Region & vbCrLf) Line 36: Next Line 37: Source File: E:\Projects\businesstrader\App_Code\Handlers\RegionsAutoComplete.vb Line: 35 Stack Trace: [MissingMemberException: Public member 'Region' on type 'String' not found.] Microsoft.VisualBasic.CompilerServices.Container.GetMembers(String& MemberName, Boolean ReportErrors) +509081 Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +222 BT.Handlers.RegionsAutoComplete.ProcessRequest(HttpContext context) in E:\Projects\businesstrader\App_Code\Handlers\RegionsAutoComplete.vb:35 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75 Can anyone tell me what I'm doing wrong?

    Read the article

  • Linq The specified type 'string' is not a valid provider type.

    - by Joe Pitz
    Using Linq to call a stored procedure that passes a single string, The stored procedure returns a data set row that contains a string and an int. Code: PESQLDataContext pe = new PESQLDataContext(strConnStr); pe.ObjectTrackingEnabled = false; gvUnitsPassed.DataSource = pe.PassedInspection(Line); gvUnitsPassed.DataBind(); pe.dispose(); When the code runs an exception gets called below: The exception is thrown at the IExecuteResult result = statement: Enclosed is my result class in the designer.cs file. [Function(Name = "dbo.PassedInspection")] public ISingleResult<PassedInspectionResult> PassedInspection([Parameter(Name = "Model", DbType = "VarChar(4)")] string model) { IExecuteResult result = this.ExecuteMethodCall(this, ((MethodInfo)(MethodInfo.GetCurrentMethod())), model); return ((ISingleResult<PassedInspectionResult>)(result.ReturnValue)); } public partial class PassedInspectionResult { private string _Date; private int _Passed; public PassedInspectionResult() { } [Column(Storage = "_Date", DbType = "string NULL")] public string Date { get { return this._Date; } set { if ((this._Date != value)) { this._Date = value; } } } [Column(Storage = "_Passed", DbType = "Int NULL")] public int Passed { get { return this._Passed; } set { if ((this._Passed != value)) { this._Passed = value; } } } } } I have other stored procedures with similar arguments that run just fine. Thanks

    Read the article

  • Creating an IIS 6 Virtual Directory with PowerShell v2 over WMI/ADSI

    - by codepoke
    I can create an IISWebVirtualDir or IISWebVirtualDirSetting with WMI, but I've found no way to turn the virtual directory into an IIS Application. The virtual directory wants an AppFriendlyName and a Path. That's easy because they're part of the ...Setting object. But in order to turn the virtual directory into an App, you need to set AppIsolated=2 and AppRoot=[its root]. I cannot do this with WMI. I'd rather not mix ADSI and WMI, so if anyone can coach me through to amking this happen in WMI I'd be very happy. Here's my demo code: $server = 'serverName' $site = 'W3SVC/10/ROOT/' $app = 'AppName' # If I use these args, the VirDir is not created at all. Fails to write read-only prop # $args = @{'Name'=('W3SVC/10/ROOT/' + $app); ` # 'AppIsolated'=2;'AppRoot'='/LM/' + $site + $app} # So I use this single arg $args = @{'Name'=($site + $app)} $args # Look at the args to make sure I'm putting what I think I am $v = set-wmiinstance -Class IIsWebVirtualDir -Authentication PacketPrivacy ` -ComputerName $server -Namespace root\microsoftiisv2 -Arguments $args $v.Put() # VirDir now exists # Pull the settings object for it and prove I can tweak it $filter = "Name = '" + $site + $app + "'" $filter $v = get-wmiobject -Class IIsWebVirtualDirSetting -Authentication PacketPrivacy ` -ComputerName $server -Namespace root\microsoftiisv2 -Filter $filter $v.AppFriendlyName = $app $v.Put() $v # Yep. Changes work. Goes without saying I cannot change AppIsolated or AppRoot # But ADSI can change them without a hitch # Slower than molasses in January, but it works $a = [adsi]("IIS://$server/" + $site + $app) $a.Put("AppIsolated", 2) $a.Put("AppRoot", ('/LM/' + $site + $app)) $a.Put("Path", "C:\Inetpub\wwwroot\news") $a.SetInfo() $a Any thoughts?

    Read the article

  • jQuery for dynamic Add/Remove row function, it's clone() objcet cannot modify element name

    - by wcy0942
    I'm try jQuery for dynamic Add/Remove row function, but I meet some question in IE8 , it's clone() objcet cannot modify element name and cannot use javascript form (prhIndexed[i].prhSrc).functionKey, but in FF it works very well, source code as attachment, please give me a favor to solve the problem. <html> $(document).ready(function() { //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Define some variables - edit to suit your needs //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // table id var _table = jQuery("#prh"); // modify here // tbody tbody var _tableBody = jQuery("tbody",_table); // buttons var _addRowBtn = jQuery("#controls #addRow"); var _insertRowBtn= jQuery("#controls #insertRow"); var _removeRowBtn= jQuery("#controls #removeRow"); //check box all var _cbAll= jQuery(".checkBoxAll", _table ); // add how many rows var _addRowsNumber= jQuery("#controls #add_rows_number"); var _hiddenControls = jQuery("#controls .hiddenControls"); var blankRowID = "blankRow"; //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //click the add row button //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _addRowBtn.click(function(){ // when input not isNaN do add row if (! isNaN(_addRowsNumber.attr('value')) ){ for (var i = 0 ; i < _addRowsNumber.attr('value') ;i++){ var newRow = jQuery("#"+blankRowID).clone(true).appendTo(_tableBody) .attr("style", "display: ''") .addClass("rowData") .removeAttr("id"); } refreshTable(_table); } return false; //kill the browser default action }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //checkbox select all //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _cbAll.click(function(){ var checked_status = this.checked; var prefixName = _cbAll.attr('name'); // find name prefix match check box (group of table) jQuery("input[name^='"+prefixName+"']").each(function() { this.checked = checked_status; }); }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Click the remove all button //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _removeRowBtn.click(function(){ var prefixName = _cbAll.attr('name'); // find name prefix match check box (group of table) jQuery("input[name^='"+prefixName+"']").not(_cbAll).each(function() { if (this.checked){ // remove tr row , ckbox name the same with rowid jQuery("#"+this.name).remove(); } }); refreshTable(_table); return false; }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Click the insert row button //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _insertRowBtn.click(function(){ var prefixName = _cbAll.attr('name'); jQuery("input[name^='"+prefixName+"']").each(function(){ var currentRow = this.name;// ckbox name the same with rowid if (this.checked == true){ newRow = jQuery("#"+blankRowID).clone(true).insertAfter(jQuery("#"+currentRow)) .attr("style", "display: ''") .addClass("rowData") .removeAttr("id"); } }); refreshTable(_table); return false; }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Function to refresh new row //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ function refreshTable(_table){ var tableId = _table.attr('id'); var count =1; // ignore hidden column // update tr rowid jQuery ( "#"+tableId ).find(".rowData").each(function(){ jQuery(this).attr('id', tableId + "_" + count ); count ++; }); count =0; jQuery ( "#"+tableId ).find("input[type='checkbox'][name^='"+tableId+"']").not(".checkBoxAll").each(function(){ // update check box id and name (not check all) jQuery(this).attr('id', tableId + "_ckbox" + count ); jQuery(this).attr('name', tableId + "_" + count ); count ++; }); // write customize code here customerRow(_table); }; //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Function to customer new row : modify here //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ function customerRow(_table){ var form = document.myform; var pageColumns = ["prhSeq", "prhChannelproperty", "prhSrc"]; //modify here var tableId = _table.attr('id'); var count =1; // ignore hidden column // update tr rowid jQuery ( "#"+tableId ).find(".rowData").each(function(){ for(var i = 0; i < pageColumns.length; i++){ jQuery ( this ).find("input[name$='"+pageColumns[i]+"']").each(function(){ jQuery(this).attr('name', 'prhIndexed['+count+'].'+pageColumns[i] ); // update prhSeq Value if (pageColumns[i] == "prhSeq") { jQuery(this).attr('value', count ); } if (pageColumns[i] == "prhSrc") { // clear default onfocus //jQuery(this).attr("onfocus", ""); jQuery(this).focus(function() { // doSomething }); } }); jQuery ( this ).find("select[name$='"+pageColumns[i]+"']").each(function(){ jQuery(this).attr('name', 'prhIndexed['+count+'].'+pageColumns[i] ); }); }// end of for count ++; }); jQuery ( "#"+tableId ).find(".rowData").each(function(){ // only for debug alert ( jQuery(this).html() ) }); }; //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ }); <div id="controls"> <table width="350px" border="0"> <tr><td> <input id="addRow" type="button" name="addRows" value="Add Row" /> <input id="add_rows_number" type="text" name="add_rows_number" value="1" style="width:20px;" maxlength="2" /> <input id="insertRow" type="button" name="insert" value="Insert Row" /> <input id="removeRow" type="button" name="deleteRows" value="Delete Row" /> </td></tr> </table></div> <table id="prh" width="350px" border="1"> <thead> <tr class="listheader"> <td nowrap width="21"><input type="checkbox" name="prh_" class="checkBoxAll"/></td> <td nowrap width="32">Sequence</td> <td nowrap width="153" align="center">Channel</td> <td nowrap width="200">Source</td> </tr> </thead> <tbody> <!-- dummy row --> <tr id='blankRow' style="display:none" > <td><input type="checkbox" id='prh_ckbox0' name='prh_0' value=""/></td> <td align="right"><input type="text" name="prhIndexed[0].prhSeq" maxlength="10" value="" onkeydown="" onblur="" onfocus="" readonly="readonly" style="width:30px;background-color:transparent;border:0;line-height:13pt;color: #993300;background-color:transparent;border:0;line-height:13pt;color: #993300;"></td> <td><select name="prhIndexed[0].prhChannelproperty"><option value=""></option> <option value="A01">A01</option> <option value="A02">A02</option> <option value="A03">A03</option> <option value="A04">A04</option> </select></td> <td><input type="text" name="prhIndexed[0].prhSrc" maxlength="6" value="new" style="width:80px;background-color:#FFFFD7;"> <div id='displayPrhSrcName0'></div> </td> </tr> <!-- row data --> <tr id='prh_1' class="rowData"> <td><input type="checkbox" id='prh_ckbox1' name='prh_1' value=""/></td> <td align="right"><input type="text" name="prhIndexed[1].prhSeq" maxlength="10" value="1" onkeydown="" onblur="" onfocus="" readonly="readonly" style="width:30px;background-color:transparent;border:0;line-height:13pt;color: #993300;background-color:transparent;border:0;line-height:13pt;color: #993300;"></td> <td><select name="prhIndexed[1].prhChannelproperty"><option value=""></option> <option value="A01">A01</option> <option value="A02">A02</option> <option value="A03">A03</option> <option value="A04">A04</option> </select></td> <td><input type="text" name="prhIndexed[1].prhSrc" maxlength="6" value="new" style="width:80px;background-color:#FFFFD7;"> <div id='displayPrhSrcName0'></div> </td> </tr> <tr id='prh_2' class="rowData"> <td><input type="checkbox" id='prh_ckbox2' name='prh_2' value=""/></td> <td align="right"><input type="text" name="prhIndexed[2].prhSeq" maxlength="10" value="2" onkeydown="" onblur="" onfocus="" readonly="readonly" style="width:30px;background-color:transparent;border:0;line-height:13pt;color: #993300;background-color:transparent;border:0;line-height:13pt;color: #993300;"></td> <td><select name="prhIndexed[2].prhChannelproperty"><option value=""></option> <option value="A01">A01</option> <option value="A02">A02</option> <option value="A03">A03</option> <option value="A04">A04</option> </select></td> <td><input type="text" name="prhIndexed[2].prhSrc" maxlength="6" value="new" style="width:80px;background-color:#FFFFD7;"> <div id='displayPrhSrcName0'></div> </td> </tr> </tbody> </table>

    Read the article

  • ExtJS: Combobox in EditorGridPanel not selecting the desired item (with test case)

    - by TomH
    I'm using ExtJS to create an EditorGridPanel with a combobox for an editor in a cell. The combobox in my EditorGridPanel that is not working as I'd expect it to. When the user types the first letter of an item in the drop down list, the combobox seems to ignore it and select the first item in the list. I can reproduce the error consistently and have put together a test case here: http://cluebucket.com/dev/testcase/testcase.html Load the page and reproduce the behavior by the following -- note that this is all done using the keyboard, no mouse clicks: Click 'Add Record' (A new row is added to the grid) enter text in the text field. TAB to the Priority field without selecting anything (None will remain selected) TAB out of the Priority field. (A new row is added to the grid) enter text and TAB to the Priority field TYPE v (Very High is selected) TAB out of the priority field (A new row is added to the grid) enter text and TAB to the Priority field Type v (None is selected, but Very High should have been) TAB out of the priority field Enter text and TAB to the priority field Type l ('el') (Low is selected) TAB out, enter text, TAB to priority Type l (None is selected) It appears that whenever the user attempts to select the same value that was selected in the previous row, the combobox selects None. Any ideas? The code is available at cluebucket.com/dev/testcase/js/testcase.js Thoughts/Pointers/Corrections are appreciated!! thanks tom

    Read the article

  • How to use Tor control protocol in C#?

    - by Ed
    I'm trying to send commands to the Tor control port programmatically to make it refresh the chain. I haven't been able to find any examples in C#, and my solution's not working. The request times out. I have the service running, and I can see it listening on the control port. public string Refresh() { TcpClient client = new TcpClient("localhost", 9051); string response = string.Empty; string authenticate = MakeTcpRequest("AUTHENTICATE", client); if (authenticate.Equals("250")) response = MakeTcpRequest("SIGNAL NEWNYM", client); client.Close(); return response; } public string MakeTcpRequest(string message, TcpClient client) { client.ReceiveTimeout = 20000; client.SendTimeout = 20000; string proxyResponse = string.Empty; try { // Send message StreamWriter streamWriter = new StreamWriter(client.GetStream()); streamWriter.Write(message); streamWriter.Flush(); // Read response StreamReader streamReader = new StreamReader(client.GetStream()); proxyResponse = streamReader.ReadToEnd(); } catch (Exception ex) { // Ignore } return proxyResponse; } Can anyone spot what I'm doing wrong?

    Read the article

  • What is wrong with this solution? (Perm-Missing-Elem codility test)

    - by user2956907
    I have started playing with codility and came across this problem: A zero-indexed array A consisting of N different integers is given. The array contains integers in the range [1..(N + 1)], which means that exactly one element is missing. Your goal is to find that missing element. Write a function: int solution(int A[], int N); that, given a zero-indexed array A, returns the value of the missing element. For example, given array A such that: A[0] = 2 A[1] = 3 A[2] = 1 A[3] = 5 the function should return 4, as it is the missing element. Assume that: N is an integer within the range [0..100,000]; the elements of A are all distinct; each element of array A is an integer within the range [1..(N + 1)]. Complexity: expected worst-case time complexity is O(N); expected worst-case space complexity is O(1), beyond input storage (not counting the storage required for input arguments). I have submitted the following solution (in PHP): function solution($A) { $nr = count($A); $totalSum = (($nr+1)*($nr+2))/2; $arrSum = array_sum($A); return ($totalSum-$arrSum); } which gave me a score of 66 of 100, because it was failing the test involving large arrays: "large_range range sequence, length = ~100,000" with the result: RUNTIME ERROR tested program terminated unexpectedly stdout: Invalid result type, int expected. I tested locally with an array of 100.000 elements, and it worked without any problems. So, what seems to be the problem with my code and what kind of test cases did codility use to return "Invalid result type, int expected"?

    Read the article

  • Drawing custom graphics on the iPhone: CALayer vs. CGContext

    - by Henry Cooke
    Hi all, I have an application in which I'm doing some custom drawing, a bunch of lines on a gradient background, like so (ignore the text, they're just UILabels): At the moment, that's all done by starting a new CGContext, drawing stuff into it with CGContextDrawLinearGradient and CGContextStrokePath, then finally saving the resulting image with UIGraphicsGetImageFromCurrentImageContext. The positioning info is calculated while I'm laying out those labels, so it'd be a PITA (and duplication of effort) to calculate it all over again when the containing UIView is drawn with drawRect, so I'm drawing it ahead of time into a UIImage. All works fine, so far so good. However, I have a sneaking suspicion that it may be more efficient to use CALayers to do this drawing. My (cursory) understanding of the difference between the two approaches is that a CALayer is more like a bunch of instructions to draw stuff, and so takes up less memory until it's actually drawn onscreen, whereas drawing everything into a UIImage ahead of time means that you've got a sodding great bitmap kicking around in memory all the time, whether it's drawn or not. Is that a correct understanding? What is generally considered to be the best way of drawing custom images on the iPhone?

    Read the article

  • What is best practice as far as using perl-isms (idiomatic expressions) in Perl?

    - by DVK
    A couple of years back I participated in writing the best practices/coding style for our (fairly large and often Perl-using) company. It was done by a committee of "senior" Perl developers. As anything done by consensus, it had parts which everyone disagreed with. Duh. The part that rubbed wrong the most was a strong recommendation to NOT use many Perlisms (loosely defined as code idioms not present in, say C++ or Java), such as "Avoid using '... unless X;' constructs". The main rationale posited for such rules as this one was that non-Perl developers would have much harder time with the Perl code base otherwise. The assumption here I guess is that Perl code jockeys are rarer breed overall - and among new hires to the company - than non-Perlers. I was wondering whether SO has any good arguments to support or reject this logic... it is mostly academic curiosity at this point as the company's Perl coding standard is ossified and will never be revised again as far as I'm aware. P.S. Just to be clear, the question is in the context I noted - the answer for an all-Perl smaller development shop is obviously a resounding "use Perl to its maximum capability".

    Read the article

  • jquery mouseover/mouseout

    - by Hulk
    In the following code once the mouse out is done the mouse over again does not work ,what is the work around for this <!DOCTYPE html> <html> <head> <style> /* div { background:#def3ca; margin:3px; width:80px; display:none; float:left; text-align:center; }*/ </style> <script src="http://code.jquery.com/jquery-latest.min.js"></script> </head> <body> <div id="playControls" style="position:absolute; bottom:0px; left:0px; right:0px;color:blue;"> Mouse over me </div> <script> $(document).ready(function() { $("#playControls").mouseover(function () { alert('here'); $("div:eq(0)").show("fast", function () { /* use callee so don't have to name the function */ $(this).next("div").show("fast", arguments.callee); }); }); $("#playControls").mouseout(function () { alert('here'); $("div").hide(2000); }); }); </script> </body> </html>

    Read the article

  • django: error while migrating from 1.1 to 1.2

    - by gruszczy
    I am trying to migrate our django project from 1.1 to 1.2, but I get following error: Traceback (most recent call last): File "./manage.py", line 11, in <module> execute_manager(settings) File "/usr/local/lib/python2.6/dist-packages/django/core/management/__init__.py", line 438, in execute_manager utility.execute() File "/usr/local/lib/python2.6/dist-packages/django/core/management/__init__.py", line 379, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/usr/local/lib/python2.6/dist-packages/django/core/management/base.py", line 191, in run_from_argv self.execute(*args, **options.__dict__) File "/usr/local/lib/python2.6/dist-packages/django/core/management/base.py", line 209, in execute translation.activate('en-us') File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/__init__.py", line 66, in activate return real_activate(language) File "/usr/local/lib/python2.6/dist-packages/django/utils/functional.py", line 55, in _curried return _curried_func(*(args+moreargs), **dict(kwargs, **morekwargs)) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/__init__.py", line 36, in delayed_loader return getattr(trans, real_name)(*args, **kwargs) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/trans_real.py", line 193, in activate _active[currentThread()] = translation(language) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/trans_real.py", line 176, in translation default_translation = _fetch(settings.LANGUAGE_CODE) File "/usr/local/lib/python2.6/dist-packages/django/utils/translation/trans_real.py", line 159, in _fetch app = import_module(appname) File "/usr/local/lib/python2.6/dist-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/home/gruszczy/Programy/bozorth/../bozorth/notifications/__init__.py", line 2, in <module> from django.db.models.signals import post_save File "/usr/local/lib/python2.6/dist-packages/django/db/__init__.py", line 75, in <module> connection = connections[DEFAULT_DB_ALIAS] File "/usr/local/lib/python2.6/dist-packages/django/db/utils.py", line 92, in __getitem__ conn = backend.DatabaseWrapper(db, alias) File "/usr/local/lib/python2.6/dist-packages/django/db/backends/sqlite3/base.py", line 154, in __init__ super(DatabaseWrapper, self).__init__(*args, **kwargs) TypeError: __init__() takes exactly 2 arguments (3 given) Anyone encountered this problem and know, how to solve?

    Read the article

  • Unable to launch Eclipse 4.1.2 after installing the Eclipse e4 tooling

    - by Kuldeep Jain
    After installing Eclipse e4 Tools in my Eclipse 4.1.2 from update site. I am getting error when launching the eclipse.exe "An error has occurred. See the log file <my_workspace_path>\.metadata\.log". And the content of .log file are: !SESSION 2012-04-06 16:00:01.609 ----------------------------------------------- eclipse.buildId=M20120223-0900 java.fullversion=J2RE 1.6.0 IBM J9 2.4 Windows XP x86-32 jvmwi3260sr5-20090519_35743 (JIT enabled, AOT enabled) J9VM - 20090519_035743_lHdSMr JIT - r9_20090518_2017 GC - 20090417_AA BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86 -clean -console !ENTRY org.eclipse.osgi 4 0 2012-04-06 16:00:17.343 !MESSAGE Application error !STACK 1 java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 1 at org.eclipse.emf.common.util.URI.segment(URI.java:1731) at org.eclipse.e4.ui.internal.workbench.ReflectionContributionFactory.getBundle(ReflectionContributionFactory.java:135) at org.eclipse.e4.ui.internal.workbench.ReflectionContributionFactory.doCreate(ReflectionContributionFactory.java:61) at org.eclipse.e4.ui.internal.workbench.ReflectionContributionFactory.create(ReflectionContributionFactory.java:53) at org.eclipse.e4.ui.internal.workbench.E4Workbench.processHierarchy(E4Workbench.java:196) at org.eclipse.e4.ui.internal.workbench.E4Workbench.init(E4Workbench.java:122) at org.eclipse.e4.ui.internal.workbench.E4Workbench.<init>(E4Workbench.java:73) at org.eclipse.e4.ui.internal.workbench.swt.E4Application.createE4Workbench(E4Application.java:293) at org.eclipse.ui.internal.Workbench$3.run(Workbench.java:534) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:520) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:599) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577) at org.eclipse.equinox.launcher.Main.run(Main.java:1410) I also tried the eclipse.exe -clean to launch it but getting same error.

    Read the article

  • Calling Matlab's MLApp.MLAppClass.FEval from F#

    - by Matthew
    Matlab provides a COM interface that supports remote execution of arbitrary functions (and code snippets). In particular, it has an Feval method that calls a given Matlab function. The third parameter to this method, pvarArgOut, has COM type VARIANT*, and appears in the Visual Studio F# editor as an argument of type: pvarArgOut: byref<obj> The following code calls interp1, which in Matlab returns a matrix (i.e. 2D double array) result, as is normal for most Matlab functions. let matlab = new MLApp.MLAppClass() let vector_to_array2d (v : vector) = Array2D.init v.Length 1 (fun i j -> v.[i]) let interp1 (xs : vector) (ys : vector) (xi : vector) = let yi : obj = new obj() matlab.Feval("interp1", 1, ref yi, vector_to_array2d xs, vector_to_array2d ys, vector_to_array2d xi) yi :?> float[,] This code compiles fine, but when calling interp1, I get a COM exception: A first chance exception of type 'System.Reflection.TargetInvocationException' occurred in mscorlib.dll A first chance exception of type 'System.Runtime.InteropServices.COMException' occurred in mscorlib.dll An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in mscorlib.dll Additional information: Invalid callee. (Exception from HRESULT: 0x80020010 (DISP_E_BADCALLEE)) I get the same error whether initialize yi with a new obj, a new Array2D, or null. How does F# translate VARIANT output arguments?

    Read the article

  • Loading not-so-well-formed XML into XDocument (multiple DTD)

    - by Gart
    I have got a problem handling data which is almost well-formed XHTML document except for it has multiple DTD declarations in the beginning: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> ... </head> <body> ... </body> </html> I need load this data into XDocument object using only the first DTD and ignoring the rest declarations. It is not possible to completely ignore DTD processing because the document may have unusual characters like &acirc; or &euro; etc. The text is retrieved from external source and I have no idea why it comes like this. Obviously my naive attempt to load this document fails with System.Xml.XmlException : Cannot have multiple DTDs: var xmlReaderSettings = new XmlReaderSettings { DtdProcessing = DtdProcessing.Parse XmlResolver = new XmlPreloadedResolver(), ConformanceLevel = ConformanceLevel.Document, }; using (var xmlReader = XmlReader.Create(stream, xmlReaderSettings)) { return XDocument.Load(xmlReader); } What would be the best way to handle this kind of data?

    Read the article

  • Writing a Javascript library that is code-completion and code-inspection friendly

    - by Vivin Paliath
    I recently made my own Javascript library and I initially used the following pattern: var myLibrary = (function () { var someProp = "..."; function someFunc() { ... } function someFunc2() { ... } return { func: someFunc, fun2: someFunc2, prop: someProp; } }()); The problem with this is that I can't really use code completion because the IDE doesn't know about the properties that the function literal is returning (I'm using IntelliJ IDEA 9 by the way). I've looked at jQuery code and tried to do this: (function(window, undefined) { var myLibrary = (function () { var someProp = "..."; function someFunc() { ... } function someFunc2() { ... } return { func: someFunc, fun2: someFunc2, prop: someProp; } }()); window.myLibrary = myLibrary; }(window)); I tried this, but now I have a different problem. The IDE doesn't really pick up on myLibrary either. The way I'm solving the problem now is this way: var myLibrary = { func: function() { }, func2: function() { }, prop: "" }; myLibrary = (function () { var someProp = "..."; function someFunc() { ... } function someFunc2() { ... } return { func: someFunc, fun2: someFunc2, prop: someProp; } }()); But that seems kinda clunky, and I can't exactly figure out how jQuery is doing it. Another question I have is how to handle functions with arbitrary numbers of parameters. For example, jQuery.bind can take 2 or 3 parameters, and the IDE doesn't seem to complain. I tried to do the same thing with my library, where a function could take 0 arguments or 1 argument. However, the IDE complains and warns that the correct number of parameters aren't being sent in. How do I handle this?

    Read the article

  • Wix Custom Action problems

    - by Grandpappy
    I'm trying to create a custom action for my Wix install, and it's just not working, and I'm unsure why. Here's the bit in the appropriate Wix File: <Binary Id="INSTALLERHELPER" SourceFile=".\Lib\InstallerHelper.dll" /> <CustomAction Id="SQLHelperAction" BinaryKey="INSTALLERHELPER" DllEntry="CustomAction1" Execute="immediate" /> Here's the full class file for my custom action: using Microsoft.Deployment.WindowsInstaller; namespace InstallerHelper { public class CustomActions { [CustomAction] public static ActionResult CustomAction1(Session session) { session.Log("Begin CustomAction1"); return ActionResult.Success; } } } When I run the MSI, I get this error in the log: MSI (c) (08:5C) [10:08:36:978]: Connected to service for CA interface. MSI (c) (08:4C) [10:08:37:030]: Note: 1: 1723 2: SQLHelperAction 3: CustomAction1 4: C:\Users\NATHAN~1.TYL\AppData\Local\Temp\MSI684F.tmp Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action SQLHelperAction, entry: CustomAction1, library: C:\Users\NATHAN~1.TYL\AppData\Local\Temp\MSI684F.tmp MSI (c) (08:4C) [10:08:38:501]: Product: SessionWorks :: Judge Edition -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action SQLHelperAction, entry: CustomAction1, library: C:\Users\NATHAN~1.TYL\AppData\Local\Temp\MSI684F.tmp Action ended 10:08:38: SQLHelperAction. Return value 3. DEBUG: Error 2896: Executing action SQLHelperAction failed. The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2896. The arguments are: SQLHelperAction, , Neither of the two error codes or messages it gives me is enough to tell me what's wrong. Or perhaps I'm just not understanding what they're saying is wrong. Any ideas on what I'm doing wrong?

    Read the article

  • WiX 3: Using heat.exe to add bulk files to a new WiX project: HEAT5150

    - by Karen Kwong
    If this is a repeat question, please direct me to the existing solution. I wasn't able to find a matching query. We currently use InstallShield. I'm attempting to covert a project with 407 files to a WiX3 installation package. I tried using heat.exe to do some of the automation but I get the following warning for almost every file: c: heat dir "c:\projectDir\projectA" -gg -ke -template:Product -out "c:\install\projectA\heatOutput" heat.exe: warning HEAT5150 : Could not harvest data from a file that was expected to be a SelfReg DLL: c:\projectDir\projectA\plugin1.dll. If this file does not support SelfReg you can ignore this warning. Otherwise, this error detail may be helpful to diagnose the failure: Unable to load file: c:\projectDir\projectA\plugin1.dll, error: 126. Q: Is it normal for this warning to be reported for every file? If there's a current "How To create/convert to your first WiX install project with many files" tutorial, please point me to it. The key requirement is "with many files". Thank-you -Karen Kwong- PS. I know that WiX is designed for incremental install project creation but it would be nice to know if there's an automated way to convert existing install projects.

    Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >