Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 180/444 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

  • AT&T U-verse 2Wire Router - Increase session table limit?

    - by caleban
    AT&T U-verse VDSL "fiber to the node" 24Mbit down / 3Mbit up 2Wire Router Model 3800HGV-B Software Version 6.1.9.24-enh.tm The 2Wire router appears to have a limit of 1024 TCP and UDP sessions. This limit appears to apply to all sessions regardless of any static IP, firewall off, DMZ plus, secondary router configurations. I've tried using the 2Wire router alone and also configuring the 2Wire static IP addressing, firewall off, DMZ plus, etc. setup along with my own pfSense router/firewall. Either way it appears I exceed the 1024 session limit and sessions start being reset. Running out of sessions isn't being caused by torrents or p2p etc. We're a business and our legitimate uses are exceeding this session limit. AT&T tells me it's not possible to bridge the router or increase or avoid the session table limit. I'm curious if anyone has found a way around either of these issues.

    Read the article

  • DELL switch 6248 port and mac mapping using SNMP

    - by Brad
    I have a Dell 6248 switch. I connect some of my servers to it and want to know which server nic connected to which switch port. I try using snmpwalk to get this information, but I just can get mac/ip mapping of my server nic from switch, I still can't get which switch port it connect. I try a tool named Managed Switch Port Mapping tool, it can show which switch port is connected to which nic/ip. I use WireShare to get all snmp packets but still can't find what's the snmp oid to get this information. Anyone knows how to get this?

    Read the article

  • VM can’t connect to outside in bridged mode

    - by Kamal
    Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have. My virtual network editor shows that my ethernet adapter(the one my host uses) is used for bridging. It is connected. I don't understand how I can get an IP address from DHCP server. I can't ping any of the DNS servers in generated /etc/resolv.conf which are the same as that of my host

    Read the article

  • Delay of mail delivery - Hosted exchange provider

    - by alex
    Hi, I recently signed up to a new hosted email provider. When I send mail (from OWA, OR Outlook) there is a delay of up to 3 minutes from when i send the message, to when it's received (in my gmail account for example) I've listed the headers below. Is there anything I can advise my new email host to do? My previous email host delivers within 5 seconds!! New email provider: Delivered-To: ****.*****@******.co.uk.test-google-a.com Received: by 10.223.120.148 with SMTP id d20cs333125far; Mon, 30 Nov 2009 08:49:43 -0800 (PST) Received: by 10.213.106.202 with SMTP id y10mr4864870ebo.35.1259599782838; Mon, 30 Nov 2009 08:49:42 -0800 (PST) Return-Path: Received: from relay005.apm-internet.net (relay005.apm-internet.net [85.119.248.8]) by mx.google.com with SMTP id 26si13016480ewy.43.2009.11.30.08.49.42; Mon, 30 Nov 2009 08:49:42 -0800 (PST) Received-SPF: neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*******.com) client-ip=85.119.248.8; Authentication-Results: mx.google.com; spf=neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*******.com) smtp.mail=****@*******.com Received: (qmail 63915 invoked from network); 30 Nov 2009 16:49:41 -0000 Received: from unknown (HELO mx-out-manc2.simplymailsolutions.com) (88.151.129.22) by relay005.apm-internet.net with SMTP; 30 Nov 2009 16:49:42 -0000 X-APM-IP: 88.151.129.22 X-APM-Score: 4 Received-SPF: none (relay005.apm-internet.net: domain at alexjamesbrown.com does not designate permitted sender hosts) Received: from [10.1.20.1] (helo=win-s-manc1.shared.ifeltd.com) by mx-out-manc2.simplymailsolutions.com with esmtp (Exim 4.63) (envelope-from ) id 1NF9QZ-0005By-Hw for ****.*****@******.co.uk; Mon, 30 Nov 2009 16:48:46 +0000 Received: from sha-exch8.shared.ifeltd.com ([10.1.20.8]) by win-s-manc1.shared.ifeltd.com with Microsoft SMTPSVC(6.0.3790.3959); Mon, 30 Nov 2009 16:48:34 +0000 Received: from sha-exch9.shared.ifeltd.com ([10.1.20.9]) by sha-exch8.shared.ifeltd.com with Microsoft SMTPSVC(6.0.3790.3959); Mon, 30 Nov 2009 16:48:34 +0000 Received: from SHA-EXCH13.shared.ifeltd.com (10.1.20.13) by sha-exch9.shared.ifeltd.com (10.1.20.9) with Microsoft SMTP Server (TLS) id 8.1.393.1; Mon, 30 Nov 2009 16:48:25 +0000 Received: from SHA-EXCH12.shared.ifeltd.com ([fe80::ecba:36d0:eec5:c928]) by SHA-EXCH13.shared.ifeltd.com ([fe80::212b:916c:70c7:a4e5%11]) with mapi; Mon, 30 Nov 2009 16:48:05 +0000 From: Alex Brown To: "****.*****@*****.co.uk" Date: Mon, 30 Nov 2009 16:48:04 +0000 Subject: testing Thread-Topic: testing Thread-Index: AQHKcdzZg4oiDsOYIEio/7k6bCk8BQ== Message-ID: Accept-Language: en-US, en-GB Content-Language: en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US, en-GB Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginalArrivalTime: 30 Nov 2009 16:48:34.0235 (UTC) FILETIME=[F48178B0:01CA71DC] Here are the headers using my previous exchange host: Delivered-To: ****.*****@******.co.uk.test-google-a.com Received: by 10.223.120.148 with SMTP id d20cs333076far; Mon, 30 Nov 2009 08:48:35 -0800 (PST) Received: by 10.213.2.70 with SMTP id 6mr4797985ebi.25.1259599715739; Mon, 30 Nov 2009 08:48:35 -0800 (PST) Return-Path: Received: from relay005.apm-internet.net (relay005.apm-internet.net [85.119.248.8]) by mx.google.com with SMTP id 26si13030993ewy.23.2009.11.30.08.48.35; Mon, 30 Nov 2009 08:48:35 -0800 (PST) Received-SPF: neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*********.com) client-ip=85.119.248.8; Authentication-Results: mx.google.com; spf=neutral (google.com: 85.119.248.8 is neither permitted nor denied by best guess record for domain of ****@*********.com) smtp.mail=****@*********.com Received: (qmail 60920 invoked from network); 30 Nov 2009 16:48:34 -0000 Received: from unknown (HELO MTAb.MsExchange2007.com) (89.31.236.50) by relay005.apm-internet.net with SMTP; 30 Nov 2009 16:48:35 -0000 X-APM-IP: 89.31.236.50 X-APM-Score: 1 Received-SPF: none (relay005.apm-internet.net: domain at alexjamesbrown.com does not designate permitted sender hosts) Received: from EXHUB02.SL.local (no.ptr.hostlogic.biz [89.31.236.28]) by MTAb.MsExchange2007.com (Spam Firewall) with ESMTP id B677A34FE0F for ; Mon, 30 Nov 2009 16:48:33 +0000 (GMT) Received: from EXHUB02.SL.local (no.ptr.hostlogic.biz [89.31.236.28]) by MTAb.MsExchange2007.com with ESMTP id 8X5B8V4tExVzoNyU for ; Mon, 30 Nov 2009 16:48:34 +0000 (GMT) Received: from EXCCR03STORE.SL.local ([10.0.0.2]) by EXHUB02.SL.local ([192.168.92.64]) with mapi; Mon, 30 Nov 2009 16:48:31 +0000 From: Alex James Brown To: "****.*****@******.co.uk" Date: Mon, 30 Nov 2009 16:48:30 +0000 Subject: testing from o Thread-Topic: testing from o Thread-Index: AQHKcdzyY1iBFWiol0ykG6xPQUZiTg== Message-ID: Accept-Language: en-US, en-GB Content-Language: en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US, en-GB Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0

    Read the article

  • Guests can't access KVM host server by name although nslookup and dig returns correct record

    - by user190196
    So I have a KVM host that also runs an apache server with some yum repos. The VM guests are connected to the default virtual network, which is configured to offer DHCP and forwarding with NAT on virbr0 (192.168.12.1). The guests can successfully access the yum repos on the host by IP address, so for example curl 192.168.122.1/repo1 returns the content without problems. But I'd like to have the guests be able to reach the web server on the host by name rather IP address. I added the desired name record to the host's /etc/hosts file and libvirt's dnsmasq service seems to be serving that correctly to the guests since nslookup and dig successfully resolve the name on the guests: [root@localhost ~]# nslookup repo Server: 192.168.122.1 Address: 192.168.122.1#53 Name: repo Address: 192.168.122.1 [root@localhost ~]# dig repo ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6 <<>> repo ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55938 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;repo. IN A ;; ANSWER SECTION: repo. 0 IN A 192.168.122.1 ;; Query time: 0 msec ;; SERVER: 192.168.122.1#53(192.168.122.1) ;; WHEN: Tue Sep 17 02:10:46 2013 ;; MSG SIZE rcvd: 38 But curl/ping/etc still fail: [root@localhost ~]# curl repo curl: (6) Couldn't resolve host 'repo' While a request via ip address works: [root@localhost ~]# curl 192.168.122.1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html> <head> <title>Index of /</title> [...] Same with ping: [root@localhost ~]# ping repo ping: unknown host repo [root@localhost ~]# ping 192.168.122.1 PING 192.168.122.1 (192.168.122.1) 56(84) bytes of data. 64 bytes from 192.168.122.1: icmp_seq=1 ttl=64 time=0.110 ms 64 bytes from 192.168.122.1: icmp_seq=2 ttl=64 time=0.146 ms 64 bytes from 192.168.122.1: icmp_seq=3 ttl=64 time=0.191 ms ^C --- 192.168.122.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2298ms rtt min/avg/max/mdev = 0.110/0.149/0.191/0.033 ms I tried adding repo 192.168.122.1 to the guests' /etc/hosts files but still no dice. Also tried changing guests' /etc/nsswitch.conf with both: hosts: files dns and hosts: dns files I've read the relevant libvirt documentation and I'm not sure where else to learn more about this and be able to move forward with it.

    Read the article

  • Reverse DNS does not match SMTP banner vs Reverse DNS mismatch

    - by MadBoy
    I have to make decision whether my Reverse DNS should match SMTP banner but Reverse DNS to DNS and vice versa stays different or vice versa. Which one to choose? I have an 2x Exchange 2010 server with one SMTP Sender with TMG 2010. TMG has 2 links connected so that we have 2 separate internet providers. The problem is I have no way to control TMG behavior on which link is used to send emails as it picks it randomly. I have 2 MX records: - mail.test.com which resolves to IP and IP resolves to mail.test.com - mail2.test.com which resolves to IP2 and IP2 resolves to mail.test.com This was done to prevent smtp banner issues but it provides problems with Reverse DNS if the server on the other side is eager enough to do comparison. But I've checked with Google and they also don't have that in perfect condition.

    Read the article

  • Dynamips Virtual Router not pinging external host after bridging

    - by maiky
    I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

    Read the article

  • Issues getting a Cisco WLC 5508 to find AIR-LAP1142N

    - by user95917
    hoping someone can help me with a problem here. I'm attempting to setup a test (loan from Cisco) wireless network. Here's what i've got/done: 5508 Controller - Service Port IP set to 10.74.5.2 /24. Management IP set to 10.74.6.2 /24 with a default gateway of 10.74.6.1. Virtual IP set to 1.1.1.1. Copper SFP in slot 7, CAT5 (known good) going from there to port 1/0/47 on the switch. Green lights on both ends. 2960-S Switch - Vlan1 - 10.74.6.1 /24. dhcp pool 10.74.6.0 /24, default router 10.74.6.1. excluded-address 10.74.6.1, 10.74.6.2. 1/0/4 on the switch is set to switchport mode access and no shut. 1/0/47 on the switch is setup to switchport mode trunk and no shut. 1/0/4 has a CAT5 (known good) cable going from there to the AP. When I do a sh cdp nei from the switch, i can see the AP and Controller listed. When i configure my PC's nic to 10.74.5.5, and plug a cable from my nic to the SP port on the controller i can get on the device via the gui. In there, the only errors/info that show up in the trap are: Link Up: Slot: 0 Port: 7 Controller time base status - Controller is out of sync with the central timebase. I've manually set the time but apparently that's not quite the problem (or at least not the entire problem). When i plug the AP in, i see on the switch console that it grants it power, it sees it connect...but the controller won't see it for some reason. From what i've read you shouldn't have to do anything to the AP as it's managed by the controller...but i'm not sure what setting I'm missing for it to work. The AP light on top is continually cycling green, red, yellow. When I first start it up, it blinks green for 20 or so seconds, then goes to solid green for another 20 seconds or so, then flashes blue, green, red for awhile...but always ends up goinn back to the standard, green, red, yellow. Does anyone see any obvious issues with my setup or have any suggestions as to why i might be having a problem? Thanks for your help!

    Read the article

  • Swiching webhosting company & database erros.

    - by gipap
    Well here comes the situation. I used to have CompanyA for webhosting. (The hosting plan was a shared one). I decided to change the hosting provider and transfer my website to CompanyB, (exclusive IP). The issue that i face is that my webpage is now displayed in two different IP addresses. So i decided to turn-off the website served by the CompanyA. Now the problem is that my database driven website, served by CompanyB, is not driven anymore, although i have added the A record mssql.mywebsite.com with the ipaddress of the database. (The database is served by dedicated db's server). So, what am i doing wrong here?

    Read the article

  • MacBook can't use internet, but nslookup and ping both work

    - by Joel Coehoorn
    I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

    Read the article

  • Wordpress site on EC2 instance suddenly superslow

    - by Emil
    Set up a wordpress page the other day following this guide. The site was up and running, loading quickly and all was well, until today. Suddenly, loading the site takes forever and doesn't even work properly, the page shows up in an incomplete fashion. I tried rebooting the instance but that didn't help. The only actions I've taken on the server is to create an elastic IP, and to point a domainname to that IP. But I don't see how that could've slowed down the page. Any thoughts on what could have caused this and on a solution to the problem?

    Read the article

  • 6to4 tunnel: cannot ping6 to ipv6.google.com?

    - by quanta
    Hi folks, Follow the Setup of 6to4 tunnel guide, I want to test ipv6 connectivity, but I cannot ping6 to ipv6.google.com. Details below: # traceroute 192.88.99.1 traceroute to 192.88.99.1 (192.88.99.1), 30 hops max, 40 byte packets 1 static.vdc.vn (123.30.53.1) 1.514 ms 2.622 ms 3.760 ms 2 static.vdc.vn (123.30.63.117) 0.608 ms 0.696 ms 0.735 ms 3 static.vdc.vn (123.30.63.101) 0.474 ms 0.477 ms 0.506 ms 4 203.162.231.214 (203.162.231.214) 11.327 ms 11.320 ms 11.312 ms 5 static.vdc.vn (222.255.165.34) 11.546 ms 11.684 ms 11.768 ms 6 203.162.217.26 (203.162.217.26) 42.460 ms 42.424 ms 42.401 ms 7 218.188.104.173 (218.188.104.173) 42.489 ms 42.462 ms 42.415 ms 8 218.189.5.10 (218.189.5.10) 42.613 ms 218.189.5.42 (218.189.5.42) 42.273 ms 42.300 ms 9 d1-26-224-143-118-on-nets.com (118.143.224.26) 205.752 ms d1-18-224-143-118-on-nets.com (118.143.224.18) 207.130 ms d1-14-224-143-118-on-nets.com (118.143.224.14) 206.970 ms 10 218.189.5.150 (218.189.5.150) 207.456 ms 206.349 ms 206.941 ms 11 * * * 12 10gigabitethernet2-1.core1.lax1.he.net (72.52.92.121) 214.087 ms 214.426 ms 214.818 ms 13 192.88.99.1 (192.88.99.1) 207.215 ms 199.270 ms 209.391 ms # ifconfig tun6to4 tun6to4 Link encap:IPv6-in-IPv4 inet6 addr: 2002:x:x::/16 Scope:Global inet6 addr: ::x.x.x.x/128 Scope:Compat UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:11 dropped:0 overruns:0 carrier:11 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) # iptunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc tun6to4: ipv6/ip remote any local x.x.x.x ttl 64 # ip -6 route show ::/96 via :: dev tun6to4 metric 256 expires 21332777sec mtu 1480 advmss 1420 hoplimit 4294967295 2002::/16 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev eth0 metric 256 expires 15674592sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 metric 256 expires 15674597sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 default via ::192.88.99.1 dev tun6to4 metric 1 expires 21332861sec mtu 1480 advmss 1420 hoplimit 4294967295 # ping6 -n -c 4 ipv6.google.com PING ipv6.google.com(2404:6800:8005::68) 56 data bytes From 2002:x:x:: icmp_seq=0 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=1 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=2 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=3 Destination unreachable: Address unreachable --- ipv6.google.com ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 2999ms What is my problem? Thanks,

    Read the article

  • How to setup separate MySQL and PHP VPS servers

    - by Fazal
    Someone recommended I should have my MySQL server separate from my Apache/PHP server in case of hacking and such. By visiting linode, slicehost and various articles here on serverfault I've managed to cobble together a decent set of instructions on how to do the Apache/PHP bit. I'm using Rackspace VPS and they provide an internal IP for each server. If I setup a MySQL VPS, should I assume that I would just add the internal IP for the database host? And I guess that I would only need to open up my default ssh port and mysql ports and install phpmyadmin on there? Ideally I would have webserver.mydomain.com and dbserver.mydomain.com (two 256mb VPS's) with servermin on webserver.mydomain.com and phpmyadmin on dbserver.mydomain.com. If anyone has any guides or advice on how to setup this type of solution I'd be more then grateful!

    Read the article

  • Cannot create a new domain in an existing active directory forest

    - by Mackenzie Carr
    I have a domain controller setup on Windows Server 2008 R2 (Forest) and I have another Windows Server 2008 R2 (New Domain) and I want to create a new domain in an existing forest. I get the following error: An Active Directory domain controller for the domain mackdev.mackenziecarr.com could not be contacted The error was "no records found for the given DNS query" The query was for the SRV record for: _ldap._tcp.dc._msdcs.mackdev.mackenziecarr.com I've seem to have tried everything even tried adding this record to the DNS server of the primary forest. I even successfully joined this server to the domain without any issues but trying to create a new domain under the existing forest is no luck. The primary forest I.P. address is 192.168.2.20 the server that I am using to try to make a child domain is 192.168.2.21 My ipconfig are as follows: I.P. Address: 192.168.2.21 Subnetmask: 255.255.255.0 Gateway: 192.168.2.1 Primary DNS: 192.168.2.20

    Read the article

  • Should I remove all unmanged switches from my network?

    - by IMAbev
    I have a office network with approx 150 devices (computers/printers/ip phones). Almost all of the end point devices have straight run Cat5e from my Hp switches directly to the device. IP phones for each end user sit between the hp switch and computer. (hp switch - in to phone out of phone in to computer) While I have gotten rid of most of them, I still have a couple linksys unmanaged switches that split off to 2 or more devices. I have heard various reasons for removing these switches but not entirely sure if it actually degrades the network. I agree that eliminating these switches certainly cleans up the network from a management standpoint. Are these unmanaged switches bad for my network? Is there a clear advantage to having 'home run' cable runs to each of my end point devices?

    Read the article

  • Cablemodem frequent connection loss

    - by LVDave
    I have a Linksys BEFCMU10 cablemodem and a WRT54GL router with Tomato 1.27 firmware on Cox cable. My question is this: I get what seems to be random disconnects from the internet, where the cable modem lights are still normal, but I can connect nowhere, either via a url or an ip address. At the same time these disconnects are happening, I can go to the router's Tomato management webpage, and release/renew my external IP address from Cox's DHCP server. I've had Cox look at the signal levels on the cable modem, and they say they look fine. What brings back the modem, for sometimes as long as 17 days, is several power-cycles of the modem. I don't understand the underlying cable modem technology too well, but I do know that if I'm able to release/renew the DHCP-provided WAN address, I'd expect that the cable modem was working ok... Anybody have any ideas??

    Read the article

  • Accessing IPv6 router interface from a minimal Fedora installation?

    - by Zack
    I've recently installed Fedora 16 and am trying to set up a simple apache server. The only problem I've run into so far is that I'm unable to access my router's web interface from any box on my network. It assigns addresses via dhcp, and the router always responds to a ping. The server is also picking up an IP from the router on the proper subnet. Now, all I really need to do is forward a port, however I am receiving "Unable to connect" through the web interfaces and "connection refused" via telnet. What are my options, and how might I go about troubleshooting this? Will I need the server's ip to be static in order to change these settings? The router is a "Netopia" model, if that helps.

    Read the article

  • How do I configure multiple domain names on my IIS server?

    - by Dillie-O
    We have a few websites that we are running on one instance of IIS that need to be mapped for each of their domain names. For example. Site A has the domain name coolness.com Site B has the domain name 6to8Weeks.com Site C has the domain name PhatTech.com When I look at the "Web Site Identification" section of the IIS configuration window, I notice that I can specify an IP address and port, but if I click the Advanced button, I can also configure the site based on host header values as well. How do I configure each site in IIS? Ideally I would like them to all be able to listen to port 80, so I don't have weird URLs, but I'm not sure if I do this using headers, IP addresses, both, or something else.

    Read the article

  • setup Mac Book Wifi interface as Wifi hotspot using specific DHCP option

    - by srjohnhuang
    I want to using my Mac Book as an access point. Besides that I also need to configure its DHCP server to not provide DNS info. For example, Mac Books AP's ssid is "MacBookHotspot". While my iPhone connected to "MacBookHotspot", I want the Wifi info displayed my iPhone would be looked like: IP ADDRESS DHCP(tab) IP Address 192.168.0.1 Subnet Mask 255.255.255.0 Router 192.168.0.254 DNS Search Domains Client ID (key point: DNS filed is blank) Does anyone have any good suggestion? Thanks!

    Read the article

  • hMailServer Email + MX Records Configuration

    - by asn187
    Trying to make DNS changes to enable email to be sent using hMailServer. My mail server is on a separate machine with a separate IP Address. I have already added MyDomain.com and an email account I have create a MX Record with the mail server being mail.domain.com an a priority on 20. 1) But the question is how do I now link this MX record for the domain to my mail server/ mail server IP Address? 2) What changes are needed in hMailServer to complete the process and be able to send emails for the domain? 3) In Settings SMTP Delivery of email: What should my configuration here look like?

    Read the article

  • Can't connect to a machine via Cisco VPN on Mac

    - by Alex
    Hi there, I have a curious problem. I can connect to work's vpn using Cisco VPN Client. I can get internet through that vpn. When I go check the IP online it tells me the IP address of the server I connected. However, when I try to ping one of the machines at work I get nothing. And traceroute says there is no route to the destination. But works for google. Any ideas? Is some traffic not sent through the VPN on mac Alex

    Read the article

  • Two Router issue, cannot reach internet

    - by DeBuGGeR
    I have on ADSL router and one CISCO Wifi Router. The ADSL Router is working fine on its own. I am connecting the lan port of the ADSL Router to the internet(RJ45) port of my Cisco wifi router. But I cannot access the internet from the Cisco router, neither through wifi nor through ethernet connection. The IP of ADSL router is 192.168.1.1 and the ip of my Wifi router is 192.168.1.100. Should I connect to the LAN port of my Wifi router rather than using the ethernet port(Marked as Internet)?

    Read the article

  • Bring internet connection to ssh target machine via tunnel?

    - by Calvin
    I have a CentOS 5 machine deep inside firewalls that's only reachable via ssh on an unconventional port, let's say 98765. I normally connect to this machine like this: ssh -P 98765 user@ip -L5900:localhost:5900 I need to run yum to install some packages on this machine, but it's not possible since the outbound ports are all closed on this machine. I want to do something like this to "bring my internet connection" to this machine: ssh -P 98765 user@ip -L5900:localhost:5900 -R80:localhost:80 -R21:localhost:21 My intention is that, when I run yum on the machine, yum will use port 80 and 21 through my originating machine. Is something like this even possible?

    Read the article

  • Can /etc/hosts.deny/allow be overridden?

    - by Tar
    I have security measures put in place to keep unwanted users out of my server. I've changed the SSH port, disabled root login, have a software firewall to block portscans, and have entries in hosts.deny and hosts.allow. I have various services denied to all but another server of mine should my IP change, and two other administrators + my own IP address. My question is, can hosts.deny/allow configuration be overridden so that they can gain access to my server? Does using chroot jail for running things like an IRC server and Teamspeak server prevent people from gaining access to my server and screwing with it?

    Read the article

  • How is the MTU is 65535 in UDP but ethernet does not allow frame size more than 1500 bytes

    - by nikku
    I am using a fast ethernet of 100 Mbps, whose frame size is less than 1500 bytes (1472 bytes for payload as per my textbook). In that, I was able to send and receive a UDP packet of message size 65507 bytes, which means the packet size was 65507 + 20 (IP Header) + 8 (UDP Header) = 65535. If the frame's payload size itself is maximum of 1472 bytes (as per my textbook), how can the packet size of IP be greater than that which here is 65535? I used sender code as char buffer[100000]; for (int i = 1; i < 100000; i++) { int len = send (socket_id, buffer, i); printf("%d\n", len); } Receiver code as while (len = recv (socket_id, buffer, 100000)) { printf("%d\n". len); } I observed that send returns -1 on i > 65507 and recv prints or receives a packet of maximum of length 65507.

    Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >