Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 181/444 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • XenServer: Editing clone configuration before boot

    - by Jeff Ferland
    Upon cloning a base image, I need to reconfigure basic settings. Regenerating the ssh host key, changing static IP assignments, setting the host name, etc. Because of the network setup, DHCP is not an option. That more or less rules out SSHing in with a predefined key or running a startup script since I can't provide the IP externally. I'd most like to mount the filesystem of the new machine on Dom0, but the lvm volumes are exported and it appears to be Bad Form to import them so the Dom0 machine can see them. What's your best suggestion for altering files in a cloned VM before boot? Must be non-interactive, and I'm going to guess out the gate that scripting access via xe console is not going to work well.

    Read the article

  • VPN Split Tunneling - Pros and Cons and how to achieve?

    - by Theveloper
    Well this is the dilemma, I want remote clients to connect to my network and only route local access through the VPN. This is split tunneling, the client uses its internet connection for all other internet requests and the VPN tunnel to my network for local requests. There's a couple of issues that arise: split tunneling in Windows is achieved by unticking an option which reads "Use default gateway on remote network" in the TCP/IP settings of the client VPN connection. At any point the user can tick it and route all his internet traffic through my network eating away at my bandwidth and being cloaked by my IP address. This is unacceptable. Issue number 2 is that if the client is split tunneling, he becomes a gateway between the internet and my network, this is also unacceptable. My questions are: how does one achieve split tunneling serverside? And is the latter issue a valid con worthy of worry? Any thoughts would be appreciated!

    Read the article

  • esxi VM will not connect to virual switch

    - by NitroxDM
    I have a exsi box with a VM (Windows 2003) that will not connect to any of the switches. The switch shows the VM connected but I can not ping anything on the network. I have double checked the VM's IP. No dice. There are a ton of messages in the log: [DATE 'VmMisc' NNNNN warning] Failed to validate VM IP address: unknown Update: There are 3 other VMs. Each vSwitch has 56 ports. I can ping from one nic to the other. Each vSwitch shows that the new VM is connect. VMware ESX Server 3i V 3.5.9 Build 123629 Update 2: Out of the blue it just started working. I didn't change anything. I think it has something to do with RRAS.

    Read the article

  • nginx reverse proxy subdomain is redirecting

    - by holtkampw
    So I have a frontend nginx server which will proxy to several other nginx servers (running Passenger for Rails apps). Here's the part of the frontend nginx config in question: server { listen 80; server_name git.domain.com; access_log /server/domain/log/nginx.access.log; error_log /server/domain/log/nginx_error.log debug; location / { proxy_pass http://127.0.0.1:8020/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } } server { listen 80; server_name domain.com; access_log /server/domain/log/nginx.access.log; error_log /server/domain/log/nginx_error.log debug; location / { proxy_pass http://127.0.0.1:8000/; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } Finally here's the backend for git.domain.com: server { listen 8020; #server_name localhost; root /server/gitorious/gitorious/public/; passenger_enabled on; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } So here's the problem. When I type in git.domain.com, my gitorious install will redirect to domain.com. It works perfect there, but it ignores the subdomain. At first I thought it was the server_name construct. I have tried git.domain.com, domain.com, localhost, and currently none. Any ideas?

    Read the article

  • Connecting Snow Leopard 10.6.4 to a Linux shared folder using Samba

    - by Vittorio Vittori
    Hi, I'm trying to connect to a web server running on Linux CentOS 5.5 where I've shared a folder. I'm trying to connect to the directory with Snow Leopart 10.6.4 client without success. On CentOS I've started the Samba service and a Samba user with his password and then I've tried to connect to the server with the command smb://10.0.0.7 to reach the IP of the machine and then writing the username and password I've previously created. The server returns me the list of the shared folders with the leopard specific browser, when I click to the folder I want the browser returns this error (translated from Italian): Leopard message: Connection failed There was an error on connecting to "smb://10.0.0.7". Please verify the name or the IP of the server, and try again. How can I do to solve the connection problem?

    Read the article

  • EC2 custom topology

    - by Methos
    Is there any way to create a desired topology of EC2 instances? For example, can I create a 3 node topology of nodes A, B, C where C gets the public IP address and B and A are connected to it. Something like: Internet <-- C <-- B <-- A B and A only get private IP addresses and there is no way for the traffic to reach A before hitting B and C. This means I can install whatever I want to install on C and B to filter, cache etc. I'm going through EC2 documentation but so far I have not seen anything that talks about it. I will really appreciate if anyone knows how to do this on EC2

    Read the article

  • Windows 8 Pro Remote Desktop issue

    - by Mike C.
    I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

    Read the article

  • Multicast doesn't seem to be working on RHEL 5.5

    - by NullUser
    I'm trying to install Oracle Grid Infrastructure on two machines. Their documentation states You must enable multicasting for the cluster on the IP address subnet ranges 224.0.0.0/24 and 230.0.1.0/24 So I ran: route add -net 224.0.0.0/24 dev eth2 route add -net 230.0.1.0/24 dev eth2 route -n produces: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 230.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 224.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 # and others An ifconfig eth2 shows, among other things, UP BROADCAST RUNNING MULTICAST. However, when I run their multicast test utility, it fails me: Test for Multicast address 230.0.1.0 Sep 3 19:40:39 | Multicast Failed for eth2 using address 230.0.1.0:42000 Test for Multicast address 224.0.0.251 Sep 3 19:41:10 | Multicast Failed for eth2 using address 224.0.0.251:42001 What am I doing wrong?

    Read the article

  • How do I set up failover for a single web server using two ISPs?

    - by Travis
    I have one web server and two WAN connections (1 cable, 1 DSL). DNS is run offsite, and points to the IP address assigned by one of the ISPs. How can I have the second connection take over when the primary one fails? I have seen that it is possible to have two A records, each pointing to a different IP, but it has several problems. What's the real solution to this? I imagine this is a very common issue. Thanks in advance!

    Read the article

  • Why are emails sent from my applications being marked as spam?

    - by Brian
    Hi. I have 2 web apps running on the same server. The first is www.nimikri.com and the other is www.hourjar.com. Both apps share the same IP address (75.127.100.175). My server is through a shared hosting company. I've been testing my apps, and at first all my emails were being delivered to me just fine. Then a few days ago every email from both apps got dumped into my spam box (in gmail and google apps). So far the apps have just been sending emails to me and nobody else, so I know people aren't manually flagging them as spam. I did a reverse DNS lookup for my IP and the results I got were these: 100.127.75.in-addr.arpa NS DNS2.GNAX.NET. 100.127.75.in-addr.arpa NS DNS1.GNAX.NET. Should the reverse DNS lookup point to nimikri.com and hourjar.com, or are they set up fine the way they are? I noticed in the email header these 2 lines: Received: from nimikri.nimikri.com From: Hour Jar <[email protected]> Would the different domain names be causing gmail to think this is spam? Here is the header from one of the emails. Please let me know if any of this looks like a red flag for spam. Thanks. Delivered-To: [email protected] Received: by 10.231.157.85 with SMTP id a21cs54749ibx; Sun, 25 Apr 2010 10:03:14 -0700 (PDT) Received: by 10.151.130.18 with SMTP id h18mr3056714ybn.186.1272214992196; Sun, 25 Apr 2010 10:03:12 -0700 (PDT) Return-Path: <[email protected]> Received: from nimikri.nimikri.com ([75.127.100.175]) by mx.google.com with ESMTP id 28si4358025gxk.44.2010.04.25.10.03.11; Sun, 25 Apr 2010 10:03:11 -0700 (PDT) Received-SPF: neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=75.127.100.175; Authentication-Results: mx.google.com; spf=neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] Received: from nimikri.nimikri.com (localhost.localdomain [127.0.0.1]) by nimikri.nimikri.com (8.14.3/8.14.3) with ESMTP id o3PH3A7a029986 for <[email protected]>; Sun, 25 Apr 2010 12:03:11 -0500 Date: Sun, 25 Apr 2010 12:03:10 -0500 From: Hour Jar <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: [email protected] has invited you to New Event MIME-Version: 1.0 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit

    Read the article

  • Lync 2010, Kamailio, & Trixbox 2.6.23 (Asterisk 1.4)

    - by slashp
    I'm having an issue trying to connect Lync 2010 phone calls with our trixbox PBX. I've gotten to the point where Kamailio seems to be functioning properly and acting as a bridge between TCP traffic (from Lync) & UDP traffic (to the trixbox, as Asterisk 1.4 does not support SIP over TCP). Our Lync box IP: 10.100.10.41 Our Kamailio box IP: 10.100.10.44 Our trixbox IP: 10.100.10.2 The issue I'm running into is as follows when enabling SIP debugging for the Kamailio box: <--- SIP read from 10.100.10.44:5060 ---> PRACK sip:TNECLTSLY01.contoso.com:5068;transport=Tcp;maddr=10.100.10.41 SIP/2.0 FROM: <sip:9121;[email protected];user=phone>;epid=CF2380792B;tag=4852bab430 TO: <sip:[email protected];user=phone>;epid=CF2380792B;tag=3684a6a24e CSEQ: 24 PRACK CALL-ID: 192daae6-00e1-4140-bddd-0394b35d475b MAX-FORWARDS: 70 Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d VIA: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK159fc989 CONTACT: <sip:TNECLTSLY01.contoso.com:5068;transport=Tcp;maddr=10.100.10.41> CONTENT-LENGTH: 0 USER-AGENT: RTCC/4.0.0.0 MediationServer RAck: 1 23 INVITE <-------------> --- (12 headers 0 lines) --- Sending to 10.100.10.44 : 5060 (NAT) <--- Transmitting (NAT) to 10.100.10.44:5060 ---> SIP/2.0 481 Call leg/transaction does not exist Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d;received=10.100.10.44 Via: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK159fc989 From: <sip:9121;[email protected];user=phone>;epid=CF2380792B;tag=4852bab430 To: <sip:[email protected];user=phone>;epid=CF2380792B;tag=3684a6a24e Call-ID: 192daae6-00e1-4140-bddd-0394b35d475b CSeq: 24 PRACK User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 <------------> trixbox1*CLI> <--- SIP read from 10.100.10.44:5060 ---> ACK sip:[email protected];user=phone SIP/2.0 FROM: "John Jones"<sip:9121;[email protected];user=phone>;tag=4852bab430;epid=CF2380792B TO: <sip:[email protected];user=phone>;tag=3684a6a24e;epid=CF2380792B CSEQ: 23 ACK CALL-ID: 192daae6-00e1-4140-bddd-0394b35d475b MAX-FORWARDS: 70 Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d VIA: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK79a21c CONTENT-LENGTH: 0 My SIP trunk on the trixbox looks like this: [from-lync] exten => _+4XXX!,1,Noop(Stripping + from start of number) exten => _+4XXX!,n,Goto(from-internal,${EXTEN:1}) Though I am still having no luck getting the + stripped or the call to go through. Any ideas would be greatly appreciated. Thank you! -slashp

    Read the article

  • 2 Servers setup for redundency, backup

    - by minal
    I presently have 1 dedicated virtual server running my website/blog/mail, etc. This is on Hyper-V with 512MB RAM. Windows Web2008. With the VM, I have these running within it: SmarterMail – for emails MS DNS – I have my own nameservers on this server SQL Express IIS7 2 IP Address I have now leased 2 physical servers : P4 2.6Ghz 1GB RAM 80GB HDD. With these new servers, I get 2 IPs per server as well. These are running Windows 2008 Standard. With the VM the HDD was obviously on a RAID setup so I was not worried about hardware issues as it fell on the provider to manage. However, with the new servers the HDD is not RAID’d, hence my concern is that if it fails I need a backup position. What would be the most ideal setup to go for? I am thinking: Server 1: (Web/PrimaryDNS) DNS – NS1 SQL Express – OFF turn on when required, ie. Server2 is down SmarterMail – OFF turn on when required, ie. Server2 is down IIS 7 Server2:(SQL/Backup) DNS – NS2 SQL Web Edition SmarterMail IIS 7 How can I set it up so that if 1 goes down I can have everything on 2 instantly or by manual switching over. I am confused as other DNS servers will cache the web servers IP address for requests, and if that server goes down, the backup server will have a different IP. How do I make this work? I will be doing routine backups, in which case I will keep copies of backups on both servers. If I am copying the same stuff on both servers like a mirror then I am losing on using the true performance out of it. It's like 1 server is always on standby. Ideally I want SQL and web on 2 diff machines for best performance. If Server1 goes down, I should be able to switch to Server2 fairly easily. I don't have a problem with manual intervention to start the sql/mail services, etc. In terms of scalabilty, the VM has coped pretty well to date. Moving forward the SQL and IIS workload is going to double pretty quickly. Some ideas would be great.

    Read the article

  • Ubuntu VM Guest - Samba Service Not Accessible from VM Host via Hostname

    - by phalacee
    I have a Windows 7 Workstation with a Ubuntu 10.10 VM running in Virtual Box 3.2.12 r68302. I recently updated Samba and winbind, and since the update, I am unable to access the machine via it's hostname (\mystique) from the VM Host. I can access it by the "Host-only" IP (\192.168.56.101) and the DHCP Assigned IP address (\10.1.1.20) and I can connect to the webserver on the machine via it's hostname (http://mystique/). As stated, accessing this machine via it's hostname worked fine prior to the update, but has since stopped working. I have added the hostname to the smb.conf for the netbios name, to no avail. My smb.conf [global] section looks like this: workgroup = NETWORK netbios name = Mystique server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user usershare allow guests = yes

    Read the article

  • Bash Script Exits su or ssh Session Rather than Script

    - by Russ
    I am using CentOS 5.4. I created a bash script that does some checking before running any commands. If the check fails, it will simply exit 0. The problem I am having is that on our server, the script will exit the su or ssh session when the exit 0 is called. #!/bin/bash # check if directory has contents and exit if none if [ -z "`ls /ebs_raid/import/*.txt 2>/dev/null`" ]; then echo "ok" exit 0 fi here is the output: [root@ip-10-251-86-31 ebs_raid]# . test.sh ok [russ@ip-10-251-86-31 ebs_raid]$ as you can see, I was removed from my sudo session, if I wasn't in the sudo session, it would have logged me out of my ssh session. I am not sure what I am doing wrong here or where to start.

    Read the article

  • Boot xen server through ipxe

    - by Ghassen Telmoudi
    I'm want install Xen Server 6.2 though ipxe, I tried different configurations, no luck making to work until now. I found some may example to boot from pxe using TFTP server, and here is an example: default xenserver-auto label xenserver-auto kernel mboot.c32 append xenserver/xen.gz dom0_max_vcpus=1-2 dom0_mem=752M,max:752M com1=115200,8n1 console=com1,vga --- xenserver/vmlinuz xencons=hvc console=hvc0 console=tty0 answerfile=http://[pxehost]/answerfile.xml remotelog=[SYSLOG] install --- xenserver/install.img The problem is that ipxe uses different syntax, I could not figure out how to convert this configuration to work on ipxe. Here is my ipxe file so far: #!ipxe echo "XEN Server is booting up" initrd http://server-ip/pxe/xen/boot/xen.gz kernel http://server-ip/pxe/xen/boot/pxelinux/mboot.c32 boot Can any one supply the correct configuration?

    Read the article

  • CNTLM issue with intranet (maybe DNS)

    - by htorque
    On my Linux box I need to use an ISA proxy that requires authentication to reach the internet. I therefore installed CNTLM and configured it to point to the proxy address and listen on port 4321. I then configured my GNOME distribution to use localhost:4321 as global proxy for HTTP and HTTPS. The result: I can connect to the internet. I can ping intranet IPs, I do receive name resolution for intranet sites, yet I cannot ping them or open any intranet site in a browser (configured to use the distributions proxy) unless I use the site's IP address. I tried blocking the intranet IP range in the CNTLM config file without luck.

    Read the article

  • Failed reverse DNS and SPF only when using Thunderbird!

    - by TruMan1
    I have a reverse DNS and SPF records correctly setup for my mail server. Sending webmail from it works perfect. The problem is when Thunderbird sends out emails, it is using the client's IP address for the hostname. I have SMTP authentication and specified my mail server's as the outgoing SMTP. Mail is being sent, but it is not "signing" the email with the mail server's IP address.. it is using the client's. Is there any way to fix this? This is the spam error I get when sending from Thunderbird: Spam: Reverse DNS Lookup, SPF_SoftFail

    Read the article

  • How to set up server/domain name correctly in hosts file with HTTPS

    - by Byakugan
    I am trying to do local network and I am using these kind of types of network. 1) Main server which connects to internet with static IP 2) Second computer connected to first one locally with address like 192.168.0.2 - when I write this address to address line it is like i wrote localhost in original main server - so it should show my local web browser etc ... It has domain name this IP and connected router for it ... example www.domain.com so I added to my main server hosts file (linux powered) lines like these: 192.168.0.2 domain.com www.domain.com It was working ok when I entered my domain name in local computer it showed my site ... But after some time I added HTTPS cerfiticate and added this line to my apatche server: Redirect permanent / https://www.domain.com/ And now it does not work even when i add something like this to my hosts file: 192.168.0.2 https://www.domain.com So any idea how do do this thing work? Thank you.

    Read the article

  • Windows 2003 DNS updates from ISC DHCP server

    - by wolfgangsz
    We have a very mixed network, with most clients being Debian Lenny, the rest Windows XP/Vista/7. The network itself is split into two segments (for technical reasons) called "corporate" and "engineering". On the "corporate" side all clients get their IP addresses from a Windows DHCP server and the dynamic updates into the Windows DNS work just fine. On the "engineering" side, clients get their IP addresses from a linux machine running the standard ISC DHCP server. Although this server is configured to do dynamic DNS updates, they actually don't work. Anybody got any advice on how to fix this? Please note: dynamic updates from the clients directly into the DNS would work, but are not an option for us. So this is strictly on how make this work from an ISC DHCP server to a Windows DNS server.

    Read the article

  • mysql remote connection [closed]

    - by Fel
    I spoke with my host supporter to find what is my sql hostname. He said that the only way is add permissions in mysql remote (cpanel) to my actual ip. So the config in heidiSQL for example will be localhost userxxx passxxx But i have a dynamic ip, so i need to change the permissions every time, correct? Add the flag % probably is not a good idea, so how can I solve this problem? Why I dont have something like mysql.something.com ? Sorry, if this question is too basic.

    Read the article

  • Route gameserver traffic through cloudflare?

    - by Michael
    I use cloudflare for my website and we have a gameserver I was wondering if it is possible to route traffic through cloudflare. This recently sprung into my head when I realized that I could route Shoutcast through another of cloudflares port (8080) which does not do any performance enhancing or anything it just acts as a reverse proxy and stops DDoS. I then tried by setting up a subdomain with my gameserver IP cloudflared and then pinged the IP and Port. It seems to have connections but when actually connecting via the game it doesnt. Any ideas?

    Read the article

  • How to specify what network interface to use with TTCP or IPERF?

    - by Sammy
    The PC has two Gigabit Ethernet ports. They function as two separate network adapters. I'm trying to do a simple loopback test between the two. I've tried TTCP and IPERF. They're giving me hard time because I'm using the same physical PC. Using pcattcp... On the receiver end: C:\PCATTCP-0114>pcattcp -r PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Receive Test 0... TCP Receive Test Local Host : GIGA ************** Listening...: On TCPv4 0.0.0.0:5001 Accept : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 Buffer Size : 8192; Alignment: 16384/0 Receive Mode: Sinking (discarding) Data Statistics : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 16777216 bytes in 0.076 real seconds = 215578.95 KB/sec +++ numCalls: 2052; msec/call: 0.038; calls/sec: 27000.000 C:\PCATTCP-0114> On the transmitter end: C:\PCATTCP-0114>PCATTCP.exe -t 10.1.1.1 PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Transmit Test 0... TCP Transmit Test Transmit : TCPv4 0.0.0.0 -> 10.1.1.1:5001 Buffer Size : 8192; Alignment: 16384/0 TCP_NODELAY : DISABLED (0) Connect : Connected to 10.1.1.1:5001 Send Mode : Send Pattern; Number of Buffers: 2048 Statistics : TCPv4 0.0.0.0 -> 10.1.1.1:5001 16777216 bytes in 0.075 real seconds = 218453.33 KB/sec +++ numCalls: 2048; msec/call: 0.037; calls/sec: 27306.667 C:\PCATTCP-0114> It's responding alright. But why does it say 0.0.0.0? Is it passing through only one of the network adapters? I want 10.1.1.1 to be the server (receiver) and 10.1.1.2 to be the client (transmitter). These are the IP addresses assigned manually to each network adapter. How do I specify these addresses in TTCP? There is also the IPERF tool which has the -B option. Unfortunately I've been only able to use this option to bind the server to the 10.1.1.1 address. I was unable to bind the client to the 10.1.1.2 address. I might be doing it wrong. Can the -B option be used for both the server as well as the client side? What does the syntax look like for the client?

    Read the article

  • Better way to stop/start Webmin and SSH

    - by Jake
    Hi, it would be a good idea to not have webmin running all the time... just start it via ssh when I need it... so, I just stop webmin,and leaving SSH always running... when I need to access webmin, I start it through SSH. but there are lots of people from many country trying to bruteforce my SSH. I can reduce bruteforce using iptables. but because Im feeling still not safe (about 3 months ago), so I stop SSH and leaving webmin always running through custom port. I just start SSH through webmin when I need. and the result, no more bruteforce on SSH, and no bruteforce on webmin (maybe because the attacker dont know my webmin custom port) but I think this is still not really safe. and I cannot restrict access to some IP because I use random IP. If I stop both SSH and webmin, I will lost access to my server. Anyone know the better way dealing with this?

    Read the article

  • SuperMicro IPMI through OpenBSD PF Firewall

    - by thelsdj
    I'm trying to access a SuperMicro IPMI card that is behind an OpenBSD bridged firewall. A couple pieces of information: The OpenBSD firewall itself has a SuperMicro IPMI that I can access across the internet. The IPMI I'm trying to reach can be reached from behind the firewall. My gateway does arp request the IPMI and it does appear to respond (this is from the external interface of the firewall) 16:57:45.548892 arp who-has ipminame tell gwname 16:57:45.549500 arp reply ipminame is-at ipmimac But when I make a request to the IPMI IP from outside the firewall the external interface of the firewall shows no traffic with the IPMI ip as its destination. Any idea what might be causing this problem? Is there something about IPMI traffic that my gateway wouldn't like (the gateway is provided by my colocation provider so I can't easily debug it).

    Read the article

  • webmin bind issue- error when i try to start bind

    - by Arvind
    I am setting up a domain = mydomain.com with 2 nameservers ns1.mydomain.com and ns2.mydomain.com in Webmin - BIND. For this, I have registered 2 child nameservers at my domain registrar, and in Webmin-Bind I have set up a new zone for this domain. In this zone, i have specified 2 nameserver records- one each for ns1 and ns2. Also, I have defined 2 address records- one each for ns1.mydomain.com -> IP Address #1 and for ns2.mydomain.com -> IP Address #2 However when I try to start BIND in Webmin, I get the following error-- Failed to start BIND : Starting named: Error in named configuration: zone mydomain.com/IN: has no NS records zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: bad zone [FAILED]

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >