parallel port - Page 180

How can I share Perl data structures through a socket?

- by pavun_cool

In sockets I have written the client server program. First I tried to send the normal string among them it sends fine. After that I tried to send the hash and array values from client to server and server to client. When I print the values using Dumper, it gives me only the reference value. What should I do to get the actual values in client server? Server Program: use IO::Socket; use strict; use warnings; my %hash = ( "name" => "pavunkumar " , "age" => 20 ) ; my $new = \%hash ; #Turn on System variable for Buffering output $| = 1; # Creating a a new socket my $socket= IO::Socket::INET->new(LocalPort=>5000,Proto=>'tcp',Localhost => 'localhost','Listen' => 5 , 'Reuse' => 1 ); die "could not create $! \n" unless ( $socket ); print "\nUDPServer Waiting port 5000\n"; my $new_sock = $socket->accept(); my $host = $new_sock->peerhost(); while(<$new_sock>) { #my $line = <$new_sock>; print Dumper "$host $_"; print $new_sock $new . "\n"; } print "$host is closed \n" ; Client Program use IO::Socket; use Data::Dumper ; use warnings ; use strict ; my %hash = ( "file" =>"log.txt" , size => "1000kb") ; my $ref = \%hash ; # This client for connecting the specified below address and port # INET function will create the socket file and establish the connection with # server my $port = shift || 5000 ; my $host = shift || 'localhost'; my $recv_data ; my $send_data; my $socket = new IO::Socket::INET ( PeerAddr => $host , PeerPort => $port , Proto => 'tcp', ) or die "Couldn't connect to Server\n"; while (1) { my $line = <stdin> ; print $socket $ref."\n"; if ( $line = <$socket> ) { print Dumper $line ; } else { print "Server is closed \n"; last ; } } I have given my sample program about what I am doing. Can any one tell me what I am doing wrong in this code? And what I need to do for accessing the hash values?

Read the article

Java, server client TCP communication ends with RST

- by Senne

I'm trying to figure out if this is normal. Because without errors, a connection should be terminated by: FIN -> <- ACK <- FIN ACK -> I get this at the end of a TCP connection (over SSL, but i also get it with non-encrypted): From To 1494 server client TCP search-agent > 59185 [PSH, ACK] Seq=25974 Ack=49460 Win=63784 Len=50 1495 client server TCP 59185 > search-agent [ACK] Seq=49460 Ack=26024 Win=63565 Len=0 1496 client server TCP 59185 > search-agent [PSH, ACK] Seq=49460 Ack=26024 Win=63565 Len=23 1497 client server TCP 59185 > search-agent [FIN, ACK] Seq=49483 Ack=26024 Win=63565 Len=0 1498 server client TCP search-agent > 59185 [PSH, ACK] Seq=26024 Ack=49484 Win=63784 Len=23 1499 client server TCP 59185 > search-agent [RST, ACK] Seq=49484 Ack=26047 Win=0 Len=0 The client exits normally and reaches socket.close, shouldn't then the connection be shut down normally, without a reset? I can't find anything about the TCP streams of java on google... Here is my code: Server: package Security; import java.io.*; import java.net.*; import javax.net.ServerSocketFactory; import javax.net.ssl.*; import java.util.*; public class SSLDemoServer { private static ServerSocket serverSocket; private static final int PORT = 1234; public static void main(String[] args) throws IOException { int received = 0; String returned; ObjectInputStream input = null; PrintWriter output = null; Socket client; System.setProperty("javax.net.ssl.keyStore", "key.keystore"); System.setProperty("javax.net.ssl.keyStorePassword", "vwpolo"); System.setProperty("javax.net.ssl.trustStore", "key.keystore"); System.setProperty("javax.net.ssl.trustStorePassword", "vwpolo"); try { System.out.println("Trying to set up server ..."); ServerSocketFactory factory = SSLServerSocketFactory.getDefault(); serverSocket = factory.createServerSocket(PORT); System.out.println("Server started!\n"); } catch (IOException ioEx) { System.out.println("Unable to set up port!"); ioEx.printStackTrace(); System.exit(1); } while(true) { client = serverSocket.accept(); System.out.println("Client trying to connect..."); try { System.out.println("Trying to create inputstream..."); input = new ObjectInputStream(client.getInputStream()); System.out.println("Trying to create outputstream..."); output = new PrintWriter(client.getOutputStream(), true); System.out.println("Client successfully connected!"); while( true ) { received = input.readInt(); returned = Integer.toHexString(received); System.out.print(" " + received); output.println(returned.toUpperCase()); } } catch(SSLException sslEx) { System.out.println("Connection failed! (non-SSL connection?)\n"); client.close(); continue; } catch(EOFException eofEx) { System.out.println("\nEnd of client data.\n"); } catch(IOException ioEx) { System.out.println("I/O problem! (correct inputstream?)"); } try { input.close(); output.close(); } catch (Exception e) { } client.close(); System.out.println("Client closed.\n"); } } } Client: package Security; import java.io.*; import java.net.*; import javax.net.ssl.*; import java.util.*; public class SSLDemoClient { private static InetAddress host; private static final int PORT = 1234; public static void main(String[] args) { System.setProperty("javax.net.ssl.keyStore", "key.keystore"); System.setProperty("javax.net.ssl.keyStorePassword", "vwpolo"); System.setProperty("javax.net.ssl.trustStore", "key.keystore"); System.setProperty("javax.net.ssl.trustStorePassword", "vwpolo"); System.out.println("\nCreating SSL socket ..."); SSLSocket socket = null; try { host = InetAddress.getByName("192.168.56.101"); SSLSocketFactory factory = (SSLSocketFactory) SSLSocketFactory.getDefault(); socket = (SSLSocket) factory.createSocket(host, PORT); socket.startHandshake(); } catch(UnknownHostException uhEx) { System.out.println("\nHost ID not found!\n"); System.exit(1); } catch(SSLException sslEx) { System.out.println("\nHandshaking unsuccessful ..."); System.exit(1); } catch (IOException e) { e.printStackTrace(); } System.out.println("\nHandshaking succeeded ...\n"); SSLClientThread client = new SSLClientThread(socket); SSLReceiverThread receiver = new SSLReceiverThread(socket); client.start(); receiver.start(); try { client.join(); receiver.join(); System.out.println("Trying to close..."); socket.close(); } catch(InterruptedException iEx) { iEx.printStackTrace(); } catch(IOException ioEx) { ioEx.printStackTrace(); } System.out.println("\nClient finished."); } } class SSLClientThread extends Thread { private SSLSocket socket; public SSLClientThread(SSLSocket s) { socket = s; } public void run() { try { ObjectOutputStream output = new ObjectOutputStream(socket.getOutputStream()); for( int i = 1; i < 1025; i++) { output.writeInt(i); sleep(10); output.flush(); } output.flush(); sleep(1000); output.close(); } catch(IOException ioEx) { System.out.println("Socket closed or unable to open socket."); } catch(InterruptedException iEx) { iEx.printStackTrace(); } } } class SSLReceiverThread extends Thread { private SSLSocket socket; public SSLReceiverThread(SSLSocket s) { socket = s; } public void run() { String response = null; BufferedReader input = null; try { input = new BufferedReader( new InputStreamReader(socket.getInputStream())); try { response = input.readLine(); while(!response.equals(null)) { System.out.print(response + " "); response = input.readLine(); } } catch(Exception e) { System.out.println("\nEnd of server data.\n"); } input.close(); } catch(IOException ioEx) { ioEx.printStackTrace(); } } }

Read the article

Why is this giving me 2 different sets of timezones?

- by chobo2

Hi I have this line to get all the timezones Dictionary<string, TimeZoneInfo> storeZoneName = TimeZoneInfo.GetSystemTimeZones().ToDictionary(z => z.DisplayName); Now when I upload I try it on my local machine I get this (UTC-12:00) International Date Line West (UTC-11:00) Coordinated Universal Time-11 (UTC-11:00) Samoa (UTC-10:00) Hawaii (UTC-09:00) Alaska (UTC-08:00) Baja California (UTC-08:00) Pacific Time (US & Canada) (UTC-07:00) Arizona (UTC-07:00) Chihuahua, La Paz, Mazatlan (UTC-07:00) Mountain Time (US & Canada) (UTC-06:00) Central America (UTC-06:00) Central Time (US & Canada) (UTC-06:00) Guadalajara, Mexico City, Monterrey (UTC-06:00) Saskatchewan (UTC-05:00) Bogota, Lima, Quito (UTC-05:00) Eastern Time (US & Canada) (UTC-05:00) Indiana (East) (UTC-04:30) Caracas (UTC-04:00) Asuncion (UTC-04:00) Atlantic Time (Canada) (UTC-04:00) Cuiaba (UTC-04:00) Georgetown, La Paz, Manaus, San Juan (UTC-04:00) Santiago (UTC-03:30) Newfoundland (UTC-03:00) Brasilia (UTC-03:00) Buenos Aires (UTC-03:00) Cayenne, Fortaleza (UTC-03:00) Greenland (UTC-03:00) Montevideo (UTC-02:00) Coordinated Universal Time-02 (UTC-02:00) Mid-Atlantic (UTC-01:00) Azores (UTC-01:00) Cape Verde Is. (UTC) Casablanca (UTC) Coordinated Universal Time (UTC) Dublin, Edinburgh, Lisbon, London (UTC) Monrovia, Reykjavik (UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna (UTC+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague (UTC+01:00) Brussels, Copenhagen, Madrid, Paris (UTC+01:00) Sarajevo, Skopje, Warsaw, Zagreb (UTC+01:00) West Central Africa (UTC+02:00) Amman (UTC+02:00) Athens, Bucharest, Istanbul (UTC+02:00) Beirut (UTC+02:00) Cairo (UTC+02:00) Harare, Pretoria (UTC+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius (UTC+02:00) Jerusalem (UTC+02:00) Minsk (UTC+02:00) Windhoek (UTC+03:00) Baghdad (UTC+03:00) Kuwait, Riyadh (UTC+03:00) Moscow, St. Petersburg, Volgograd (UTC+03:00) Nairobi (UTC+03:30) Tehran (UTC+04:00) Abu Dhabi, Muscat (UTC+04:00) Baku (UTC+04:00) Port Louis (UTC+04:00) Tbilisi (UTC+04:00) Yerevan (UTC+04:30) Kabul (UTC+05:00) Ekaterinburg (UTC+05:00) Islamabad, Karachi (UTC+05:00) Tashkent (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi (UTC+05:30) Sri Jayawardenepura (UTC+05:45) Kathmandu (UTC+06:00) Astana (UTC+06:00) Dhaka (UTC+06:00) Novosibirsk (UTC+06:30) Yangon (Rangoon) (UTC+07:00) Bangkok, Hanoi, Jakarta (UTC+07:00) Krasnoyarsk (UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi (UTC+08:00) Irkutsk (UTC+08:00) Kuala Lumpur, Singapore (UTC+08:00) Perth (UTC+08:00) Taipei (UTC+08:00) Ulaanbaatar (UTC+09:00) Osaka, Sapporo, Tokyo (UTC+09:00) Seoul (UTC+09:00) Yakutsk (UTC+09:30) Adelaide (UTC+09:30) Darwin (UTC+10:00) Brisbane (UTC+10:00) Canberra, Melbourne, Sydney (UTC+10:00) Guam, Port Moresby (UTC+10:00) Hobart (UTC+10:00) Vladivostok (UTC+11:00) Magadan, Solomon Is., New Caledonia (UTC+12:00) Auckland, Wellington (UTC+12:00) Coordinated Universal Time+12 (UTC+12:00) Fiji (UTC+12:00) Petropavlovsk-Kamchatsky (UTC+13:00) Nuku'alofa When I run it on a different local machine or my server I have this. <option value="(GMT) Casablanca">(GMT) Casablanca</option> <option value="(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London">(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London</option> <option value="(GMT) Monrovia, Reykjavik">(GMT) Monrovia, Reykjavik</option> <option value="(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna">(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna</option> <option value="(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague">(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague</option> <option value="(GMT+01:00) Brussels, Copenhagen, Madrid, Paris">(GMT+01:00) Brussels, Copenhagen, Madrid, Paris</option> <option value="(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb">(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb</option> <option value="(GMT+01:00) West Central Africa">(GMT+01:00) West Central Africa</option> <option value="(GMT+02:00) Amman">(GMT+02:00) Amman</option> <option value="(GMT+02:00) Athens, Bucharest, Istanbul">(GMT+02:00) Athens, Bucharest, Istanbul</option> <option value="(GMT+02:00) Beirut">(GMT+02:00) Beirut</option> <option value="(GMT+02:00) Cairo">(GMT+02:00) Cairo</option> <option value="(GMT+02:00) Harare, Pretoria">(GMT+02:00) Harare, Pretoria</option> <option value="(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius">(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius</option> <option value="(GMT+02:00) Jerusalem">(GMT+02:00) Jerusalem</option> <option value="(GMT+02:00) Minsk">(GMT+02:00) Minsk</option> <option value="(GMT+02:00) Windhoek">(GMT+02:00) Windhoek</option> <option value="(GMT+03:00) Baghdad">(GMT+03:00) Baghdad</option> <option value="(GMT+03:00) Kuwait, Riyadh">(GMT+03:00) Kuwait, Riyadh</option> <option value="(GMT+03:00) Moscow, St. Petersburg, Volgograd">(GMT+03:00) Moscow, St. Petersburg, Volgograd</option> <option value="(GMT+03:00) Nairobi">(GMT+03:00) Nairobi</option> <option value="(GMT+03:00) Tbilisi">(GMT+03:00) Tbilisi</option> <option value="(GMT+03:30) Tehran">(GMT+03:30) Tehran</option> <option value="(GMT+04:00) Abu Dhabi, Muscat">(GMT+04:00) Abu Dhabi, Muscat</option> <option value="(GMT+04:00) Baku">(GMT+04:00) Baku</option> <option value="(GMT+04:00) Port Louis">(GMT+04:00) Port Louis</option> <option value="(GMT+04:00) Yerevan">(GMT+04:00) Yerevan</option> <option value="(GMT+04:30) Kabul">(GMT+04:30) Kabul</option> <option value="(GMT+05:00) Ekaterinburg">(GMT+05:00) Ekaterinburg</option> <option value="(GMT+05:00) Islamabad, Karachi">(GMT+05:00) Islamabad, Karachi</option> <option value="(GMT+05:00) Tashkent">(GMT+05:00) Tashkent</option> <option value="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi">(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi</option> <option value="(GMT+05:30) Sri Jayawardenepura">(GMT+05:30) Sri Jayawardenepura</option> <option value="(GMT+05:45) Kathmandu">(GMT+05:45) Kathmandu</option> <option value="(GMT+06:00) Almaty, Novosibirsk">(GMT+06:00) Almaty, Novosibirsk</option> <option value="(GMT+06:00) Astana, Dhaka">(GMT+06:00) Astana, Dhaka</option> <option value="(GMT+06:30) Yangon (Rangoon)">(GMT+06:30) Yangon (Rangoon)</option> <option value="(GMT+07:00) Bangkok, Hanoi, Jakarta">(GMT+07:00) Bangkok, Hanoi, Jakarta</option> <option value="(GMT+07:00) Krasnoyarsk">(GMT+07:00) Krasnoyarsk</option> <option value="(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi">(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi</option> <option value="(GMT+08:00) Irkutsk, Ulaan Bataar">(GMT+08:00) Irkutsk, Ulaan Bataar</option> <option value="(GMT+08:00) Kuala Lumpur, Singapore">(GMT+08:00) Kuala Lumpur, Singapore</option> <option value="(GMT+08:00) Perth">(GMT+08:00) Perth</option> <option value="(GMT+08:00) Taipei">(GMT+08:00) Taipei</option> <option value="(GMT+09:00) Osaka, Sapporo, Tokyo">(GMT+09:00) Osaka, Sapporo, Tokyo</option> <option value="(GMT+09:00) Seoul">(GMT+09:00) Seoul</option> <option value="(GMT+09:00) Yakutsk">(GMT+09:00) Yakutsk</option> <option value="(GMT+09:30) Adelaide">(GMT+09:30) Adelaide</option> <option value="(GMT+09:30) Darwin">(GMT+09:30) Darwin</option> <option value="(GMT+10:00) Brisbane">(GMT+10:00) Brisbane</option> <option value="(GMT+10:00) Canberra, Melbourne, Sydney">(GMT+10:00) Canberra, Melbourne, Sydney</option> <option value="(GMT+10:00) Guam, Port Moresby">(GMT+10:00) Guam, Port Moresby</option> <option value="(GMT+10:00) Hobart">(GMT+10:00) Hobart</option> <option value="(GMT+10:00) Vladivostok">(GMT+10:00) Vladivostok</option> <option value="(GMT+11:00) Magadan, Solomon Is., New Caledonia">(GMT+11:00) Magadan, Solomon Is., New Caledonia</option> <option value="(GMT+12:00) Auckland, Wellington">(GMT+12:00) Auckland, Wellington</option> <option value="(GMT+12:00) Fiji, Kamchatka, Marshall Is.">(GMT+12:00) Fiji, Kamchatka, Marshall Is.</option> <option value="(GMT+13:00) Nuku'alofa">(GMT+13:00) Nuku'alofa</option> <option value="(GMT-01:00) Azores">(GMT-01:00) Azores</option> <option value="(GMT-01:00) Cape Verde Is.">(GMT-01:00) Cape Verde Is.</option> <option value="(GMT-02:00) Mid-Atlantic">(GMT-02:00) Mid-Atlantic</option> <option value="(GMT-03:00) Brasilia">(GMT-03:00) Brasilia</option> <option value="(GMT-03:00) Buenos Aires">(GMT-03:00) Buenos Aires</option> <option value="(GMT-03:00) Georgetown">(GMT-03:00) Georgetown</option> <option value="(GMT-03:00) Greenland">(GMT-03:00) Greenland</option> <option value="(GMT-03:00) Montevideo">(GMT-03:00) Montevideo</option> <option value="(GMT-03:30) Newfoundland">(GMT-03:30) Newfoundland</option> <option value="(GMT-04:00) Atlantic Time (Canada)">(GMT-04:00) Atlantic Time (Canada)</option> <option value="(GMT-04:00) La Paz">(GMT-04:00) La Paz</option> <option value="(GMT-04:00) Manaus">(GMT-04:00) Manaus</option> <option value="(GMT-04:00) Santiago">(GMT-04:00) Santiago</option> <option value="(GMT-04:30) Caracas">(GMT-04:30) Caracas</option> <option value="(GMT-05:00) Bogota, Lima, Quito, Rio Branco">(GMT-05:00) Bogota, Lima, Quito, Rio Branco</option> <option value="(GMT-05:00) Eastern Time (US & Canada)">(GMT-05:00) Eastern Time (US & Canada)</option> <option value="(GMT-05:00) Indiana (East)">(GMT-05:00) Indiana (East)</option> <option value="(GMT-06:00) Central America">(GMT-06:00) Central America</option> <option value="(GMT-06:00) Central Time (US & Canada)">(GMT-06:00) Central Time (US & Canada)</option> <option value="(GMT-06:00) Guadalajara, Mexico City, Monterrey">(GMT-06:00) Guadalajara, Mexico City, Monterrey</option> <option value="(GMT-06:00) Saskatchewan">(GMT-06:00) Saskatchewan</option> <option value="(GMT-07:00) Arizona">(GMT-07:00) Arizona</option> <option value="(GMT-07:00) Chihuahua, La Paz, Mazatlan">(GMT-07:00) Chihuahua, La Paz, Mazatlan</option> <option value="(GMT-07:00) Mountain Time (US & Canada)">(GMT-07:00) Mountain Time (US & Canada)</option> <option value="(GMT-08:00) Pacific Time (US & Canada)">(GMT-08:00) Pacific Time (US & Canada)</option> <option value="(GMT-08:00) Tijuana, Baja California">(GMT-08:00) Tijuana, Baja California</option> <option value="(GMT-09:00) Alaska">(GMT-09:00) Alaska</option> <option value="(GMT-10:00) Hawaii">(GMT-10:00) Hawaii</option> <option value="(GMT-11:00) Midway Island, Samoa">(GMT-11:00) Midway Island, Samoa</option> <option value="(GMT-12:00) International Date Line West">(GMT-12:00) International Date Line West</option> They are different. Same line of code but one is GMT and one is UTC. How can I force it to be always the same? Also I want to have a default choice of "UTC" but I am not sure what the diff is between this (UTC-11:00) Coordinated Universal Time-11 and this (UTC-02:00) Coordinated Universal Time-02

Read the article

MEF CompositionInitializer for WPF

- by Reed

The Managed Extensibility Framework is an amazingly useful addition to the .NET Framework. I was very excited to see System.ComponentModel.Composition added to the core framework. Personally, I feel that MEF is one tool I’ve always been missing in my .NET development. Unfortunately, one perfect scenario for MEF tends to fall short of it’s full potential is in Windows Presentation Foundation development. In particular, there are many times when the XAML parser constructs objects in WPF development, which makes composition of those parts difficult. The current release of MEF (Preview Release 9) addresses this for Silverlight developers via System.ComponentModel.Composition.CompositionInitializer. However, there is no equivalent class for WPF developers. The CompositionInitializer class provides the means for an object to compose itself. This is very useful with WPF and Silverlight development, since it allows a View, such as a UserControl, to be generated via the standard XAML parser, and still automatically pull in the appropriate ViewModel in an extensible manner. Glenn Block has demonstrated the usage for Silverlight in detail, but the same issues apply in WPF. As an example, let’s take a look at a very simple case. Take the following XAML for a Window: <Window x:Class="WpfApplication1.MainView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="220" Width="300"> <Grid> <TextBlock Text="{Binding TheText}" /> </Grid> </Window> This does nothing but create a Window, add a simple TextBlock control, and use it to display the value of our “TheText” property in our DataContext class. Since this is our main window, WPF will automatically construct and display this Window, so we need to handle constructing the DataContext and setting it ourselves. We could do this in code or in XAML, but in order to do it directly, we would need to hard code the ViewModel type directly into our XAML code, or we would need to construct the ViewModel class and set it in the code behind. Both have disadvantages, and the disadvantages grow if we’re using MEF to compose our ViewModel. Ideally, we’d like to be able to have MEF construct our ViewModel for us. This way, it can provide any construction requirements for our ViewModel via [ImportingConstructor], and it can handle fully composing the imported properties on our ViewModel. CompositionInitializer allows this to occur. We use CompositionInitializer within our View’s constructor, and use it for self-composition of our View. Using CompositionInitializer, we can modify our code behind to: public partial class MainView : Window { public MainView() { InitializeComponent(); CompositionInitializer.SatisfyImports(this); } [Import("MainViewModel")] public object ViewModel { get { return this.DataContext; } set { this.DataContext = value; } } } We then can add an Export on our ViewModel class like so: [Export("MainViewModel")] public class MainViewModel { public string TheText { get { return "Hello World!"; } } } MEF will automatically compose our application, decoupling our ViewModel injection to the DataContext of our View until runtime. When we run this, we’ll see: There are many other approaches for using MEF to wire up the extensible parts within your application, of course. However, any time an object is going to be constructed by code outside of your control, CompositionInitializer allows us to continue to use MEF to satisfy the import requirements of that object. In order to use this from WPF, I’ve ported the code from MEF Preview 9 and Glenn Block’s (now obsolete) PartInitializer port to Windows Presentation Foundation. There are some subtle changes from the Silverlight port, mainly to handle running in a desktop application context. The default behavior of my port is to construct an AggregateCatalog containing a DirectoryCatalog set to the location of the entry assembly of the application. In addition, if an “Extensions” folder exists under the entry assembly’s directory, a second DirectoryCatalog for that folder will be included. This behavior can be overridden by specifying a CompositionContainer or one or more ComposablePartCatalogs to the System.ComponentModel.Composition.Hosting.CompositionHost static class prior to the first use of CompositionInitializer. Please download CompositionInitializer and CompositionHost for VS 2010 RC, and contact me with any feedback. Composition.Initialization.Desktop.zip Edit on 3/29: Glenn Block has since updated his version of CompositionInitializer (and ExportFactory<T>!), and made it available here: http://cid-f8b2fd72406fb218.skydrive.live.com/self.aspx/blog/Composition.Initialization.Desktop.zip This is a .NET 3.5 solution, and should soon be pushed to CodePlex, and made available on the main MEF site.

Read the article

SSAS processing error: Client unable to establish connection; 08001; Encryption not supported on the client.; 08001

- by Kevin Shyr

After getting the cube to successfully deploy and process on Friday, I was baffled on Monday that the newly added dimension caused the cube processing to break. I then followed the first instinct, discarded all my changes to reverted back to the version on Friday, and had no luck. The error message (attached below) did not help as I was looking for some kind of SQL service error. After examining the windows server log and the SQL server log, I just couldn't see anything wrong with it.After swearing for some time, and with the help of going off and working on something else for a while. I came back to the solution and looked at the data source. Even though I know I have never changed the provider (the default setup gave me SQL native client), I decided to change it and give OLE DB a try.This simple change allows my cube to process successfully again. While I don't understand why the same settings that worked last week doesn't work this week, I don't have all the information to say with certainty that nothing has changed in the environment (firewall changes, server updates, etc.).SSAS processing error:<Batch > <Parallel> <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"> <Object> <DatabaseID>DWH Sales Facts</DatabaseID> <CubeID>DWH Sales Facts</CubeID> </Object> <Type>ProcessFull</Type> <WriteBackTableCreation>UseExisting</WriteBackTableCreation> </Process> </Parallel></Batch> Processing Dimension 'Date' completed. Errors and Warnings from Response OLE DB error: OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001. Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'DWH Sales Facts', Name of 'DWH Sales Facts'. Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Currency', Name of 'Currency' was being processed. Errors in the OLAP storage engine: An error occurred while the 'Currency Dim ID' attribute of the 'Currency' dimension from the 'DWH Sales Facts' database was being processed. Internal error: The operation terminated unsuccessfully. Server: The operation has been cancelled.

Read the article

GPU Debugging with VS 11

- by Daniel Moth

With VS 11 Developer Preview we have invested tremendously in parallel debugging for both CPU (managed and native) and GPU debugging. I'll be doing a whole bunch of blog posts on those topics, and in this post I just wanted to get people started with GPU debugging, i.e. with debugging C++ AMP code. First I invite you to watch 6 minutes of a glimpse of the C++ AMP debugging experience though this video (ffw to minute 51:54, up until minute 59:16). Don't read the rest of this post, just go watch that video, ideally download the High Quality WMV. Summary GPU debugging essentially means debugging the lambda that you pass to the parallel_for_each call (plus any functions you call from the lambda, of course). CPU debugging means debugging all the code above and below the parallel_for_each call, i.e. all the code except the restrict(direct3d) lambda and the functions that it calls. With VS 11 you have to choose what debugger you want to use for a particular debugging session, CPU or GPU. So you can place breakpoints all over your code, then choose what debugger you want (CPU or GPU), and you'll only be able to hit breakpoints for the code type that the debugger engine understands – the remaining breakpoints will appear as unbound. If you want to hit the unbound breakpoints, you'd have to stop debugging, and start again with the other debugger. Sorry. We suck. We know. But once you are past that limitation, I think you'll find the experience truly rewarding – seriously! Switching debugger engines With the Developer Preview bits, one way to switch the debugger engine is through the project properties – see the screenshots that follow. This one is showing the CPU option selected, which is basically the default that you are all familiar with: This screenshot is showing the GPU option selected, by changing the debugger launcher (notice that this applies for both the local and remote case): You actually do not have to open the project properties just for switching the debugger engine, you can switch the selection from the toolbar in VS 11 Developer Preview too – see following screenshot (the effect is the same as if you opened the project properties and switched there) Breakpoint behavior Here are two screenshots, one showing a debugging session for CPU and the other a debugging session for GPU (notice the unbound breakpoints in each case) …and here is the GPU case (where we cannot bind the CPU breakpoints but can the GPU breakpoint, which is actually hit) Give C++ AMP debugging a try So to debug your C++ AMP code, pull down the drop down under the 'play' button to select the 'GPU C++ Direct3D Compute Debugger' menu option, then hit F5 (or the 'play' button itself). Then you can explore debugging by exploring the menus under the Debug and under the Debug->Windows menus. One way to do that exploration is through the C++ AMP debugging walkthrough on MSDN. Another way to explore the C++ AMP debugging experience, you can use the moth.cpp code file, which is what I used in my BUILD session debugger demo. Note that for my demo I was using the latest internal VS11 bits, so your experience with the Developer Preview bits won't be identical to what you saw me demonstrate, but it shouldn't be far off. Stay tuned for a lot more content on the parallel debugger in VS 11, both CPU and GPU, both managed and native. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Bluetooth DUN Tethering fails

- by tacone

I have an HTC Desire HD, with Android Froyo (2.2) and PDANet installed. I am using Ubuntu 10.10. I cannot tether it over Bluetooth either with Network Manager or BlueMan. (note, I installed Blueman only after failing with NetWork manager, and I even tried the last version from the PPA). With both my device is discovered, paired, setup. But connecting always fail. Network manager says it cannot get the details of my device Blueman says Connection Refused (111) Here are some relevant entries from syslog. Mar 11 22:13:00 tacone-macbook bluetoothd[2242]: Bluetooth deamon 4.69 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting SDP server Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting experimental netlink support Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to find Bluetooth netlink family Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to init netlink plugin Mar 11 22:13:00 tacone-macbook kernel: [ 158.284357] Bluetooth: L2CAP ver 2.14 Mar 11 22:13:00 tacone-macbook kernel: [ 158.284361] Bluetooth: L2CAP socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.446781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Mar 11 22:13:00 tacone-macbook kernel: [ 158.446784] Bluetooth: BNEP filters: protocol multicast Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 registered Mar 11 22:13:00 tacone-macbook kernel: [ 158.569481] Bluetooth: SCO (Voice Link) ver 0.6 Mar 11 22:13:00 tacone-macbook kernel: [ 158.569484] Bluetooth: SCO socket layer initialized Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 up Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting security manager 0 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: ioctl(HCIUNBLOCKADDR): Invalid argument (22) Mar 11 22:13:00 tacone-macbook kernel: [ 158.818600] Bluetooth: RFCOMM TTY layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818607] Bluetooth: RFCOMM socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818610] Bluetooth: RFCOMM ver 1.11 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Adapter /org/bluez/2242/hci0 has been enabled Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from ListDevices reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:13:00 tacone-macbook NetworkManager[1247]: <warn> bluez error getting adapter properties: Rejected send message, 1 matched rules; type="method_call", sender=":1.4" (uid=0 pid=1247 comm="NetworkManager) interface="org.bluez.Adapter" member="GetProperties" error name="(unset)" requested_reply=0 destination="org.bluez" (uid=0 pid=2242 comm="/usr/sbin/bluetoothd)) Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: return_link_keys (sba=00:23:6C:B5:03:6F, dba=00:23:6C:C0:F1:B0) Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:02 tacone-macbook bluetoothd[2243]: Discovery session 0x2262d7c0 with :1.45 activated Mar 11 22:15:15 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:15 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: io_capa_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:17 tacone-macbook bluetoothd[2243]: io_capa_response (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:18 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_notify (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE, type=5) Mar 11 22:15:28 tacone-macbook kernel: [ 306.585725] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.630757] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: Authentication requested Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:28 tacone-macbook kernel: [ 306.784829] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.857861] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: last message repeated 8 times Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:30 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0): probe requested by plugin 'Generic' Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:49 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:16:15 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:16:19 tacone-macbook kernel: [ 357.375108] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.169506] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.215529] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.281559] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.330588] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Any help ? PS: tethering via USB or WiFi is not an option, I need to do it over Bluetooth.

Read the article

SQL Server service accounts and SPNs

- by simonsabin

Service Principal Names (SPNs) are a must for kerberos authentication which is a must when using sharepoint, reporting services and sql server where you access one server that then needs to access another resource, this is called the double hop. The reason this is a complex problem is that the second hop has to be done with impersonation/delegation. For this to work there needs to be a way for the security system to make sure that the service in the middle is allowed to impersonate you, after all you are not giving the service your password. To do this you need to be using kerberos. The following is my simple interpretation of how kerberos works. I find the Kerberos documentation rediculously complex so the following might be sligthly wrong but I think its close enough. Keberos works on a ticketing system, the prinicipal is that you get a security token from AD and then you can pass that to the service in the middle which can then use that token to impersonate you. For that to work AD has to be able to identify who is allowed to use the token, in this case the service account.But how do you as a client know what service account the service in the middle is configured with. The answer is SPNs. The SPN is the mapping between your logical connection to the service account. One type of SPN is for the DNS name for the server and the port. i.e. MySQL.mydomain.com and 1433. You can see how this maps to SQL Server on that server, but how does it map to the account. Well it can be done in two ways, either you can have a mapping defined in AD or AD can use a default mapping (this is something I didn't know about). To map the SPN in AD then you have to add the SPN to the user account, this is documented in the first link below either directly or using a tool called SetSPN. You might say that is complex, well it is and thats why SQL Server tries to do it for you, at start up it tries to connect to AD and set the SPN on the account it is running as, clearly that can only happen IF SQL is running as a domain account AND importantly it has permission to do so. By default a normal domain user account doesn't have the correct permission, and is why so many people have this problem. If the account is a domain admin then it will have permission, but non of us run SQL using domain admin accounts do we. You might also note that the SPN contains the port number (this isn't a requirement now in sql 2008 but I won't go into that), so if you set it manually and you are using dynamic ports (the default for a named instance) what do you do, well every time the port changes you need to change the SPN allocated to the account. Thats why its advised to let SQL Server register the SPN itself. You may also have thought, well what happens if I change my service account, won't that lead to two accounts with the same SPN. Possibly. Having two accounts with the same SPN is definitely a problem. Why? Well because if there are two accounts Kerberos can't identify the exact account that the service is running as, it could be either account, and so your security falls back to NTLM. SETSPN is useful for finding duplicate SPNs Reading this you will probably be thinking Oh my goodness this is really difficult. It is however I've found today in investigating something else that there is an easy option. Use Network Service as your service account. Network Service is a special account and is tied to the computer. It appears that Network Service has the update rights to AD to set an SPN mapping for the computer account. This then allows the SPN mapping to work. I believe this also works for the local system account. To get all the SPNs in your AD run the following, it could be a large file, so you might want to restrict it to a specific OU, or CN ldifde -d "DC=<domain>" -l servicePrincipalName -F spn.txt You will read in the links below that you need SQL to register the SPN this is done how to use Kerberos authenticaiton in SQL Server - http://support.microsoft.com/kb/319723 Using Kerberos with SQL Server - http://blogs.msdn.com/sql_protocols/archive/2005/10/12/479871.aspx Understanding Kerberos and NTLM authentication in SQL Server Connections - http://blogs.msdn.com/sql_protocols/archive/2006/12/02/understanding-kerberos-and-ntlm-authentication-in-sql-server-connections.aspx Summary The only reason I personally know to use a domain account is when you can't get kerberos to work and you want to do BULK INSERT or other network service that requires access to a a remote server. In this case you have to resort to using SQL authentication and the SQL Server uses its service account to access the remote service, and thus you need a domain account. You migth need this if using some forms of replication. I've always found Kerberos awkward to setup and so fallen back to this domain account approach. So in summary to get Kerberos to work try using the network service or local system accounts. For a great post from the Adam Saxton of the SQL Server support team go to http://blogs.msdn.com/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx

Read the article

Running a Silverlight application in the Google App Engine platform

- by rajbk

This post shows you how to host a Silverlight application in the Google App Engine (GAE) platform. You deploy and host your Silverlight application on Google’s infrastructure by creating a configuration file and uploading it along with your application files. I tested this by uploading an old demo of mine - the four stroke engine silverlight demo. It is currently being served by the GAE over here: http://fourstrokeengine.appspot.com/ The steps to run your Silverlight application in GAE are as follows: Account Creation Create an account at http://appengine.google.com/. You are allocated a free quota at signup. Select “Create an Application” Verify your account by SMS Create your application by clicking on “Create an Application” Pick an application identifier on the next screen. The identifier has to be unique. You will use this identifier when uploading your application. The application you create will by default be accessible at [applicationidentifier].appspot.com. You can also use custom domains if needed (refer to the docs). Save your application. Download SDK We will use the Windows Launcher for Google App Engine tool to upload our apps (it is possible to do the same through command line). This is a GUI for creating, running and deploying applications. The launcher lets you test the app locally before deploying it to the GAE. This tool is available in the Google App Engine SDK. The GUI is written in Python and therefore needs an installation of Python to run. Download and install the Python Binaries from here: http://www.python.org/download/ Download and install the Google App Engine SDK from here: http://code.google.com/appengine/downloads.html Run the GAE Launcher. Select Create New Application. On the next dialog, give your application a name (this must match the identifier we created earlier) For Parent Directory, point to the directory containing your Silverlight files. Change the port if you want to. The port is used by the GAE local web server. The server is started if you choose to run the application locally for testing purposes. Hit Save. Configure, Test and Upload As shown below, the files I am interested in uploading for my Silverlight demo app are The html page used to host the Silverlight control The xap file containing the compiled Silverlight application A favicon.ico file. We now create a configuration file for our application called app.yaml. The app.yaml file specifies how URL paths correspond to request handlers and static files. We edit the file by selecting our app in the GUI and clicking “Edit” The contents of file after editing is shown below (note that the contents of the file should be in plain text): application: fourstrokeengine version: 1 runtime: python api_version: 1 handlers: - url: / static_files: Default.html upload: Default.html - url: /favicon.ico static_files: favicon.ico upload: favicon.ico - url: /FourStrokeEngine.xap static_files: FourStrokeEngine.xap upload: FourStrokeEngine.xap mime_type: application/x-silverlight-app - url: /.* static_files: Default.html upload: Default.html We have listed URL patterns for our files, specified them as static files and specified a mime type for our xap file. The wild card URL at the end will match all URLs that are not found to our default page (you would normally include a html file that displays a 404 message). To understand more about app.yaml, refer to this page. Save the file. Run the application locally by selecting “Browse” in the GUI. A web server listening on the port you specified is started (8080 in my case). The app is loaded in your default web browser pointing to http://localhost:8080/. Make sure the application works as expected. We are now ready to deploy. Click the “Deploy” icon. You will be prompted for your username and password. Hit OK. The files will get uploaded and you should get a dialog telling you to “close the window”. We are done uploading our Silverlight application. Go to http://appengine.google.com/ and launch the application by clicking on the link in the “Current Version” column. You should be taken to a URL which points to your application running in Google’s infrastructure : http://fourstrokeengine.appspot.com/. We are done deploying our application! Clicking on the link in the Application column will take you to the Admin console where you can see stats related to system usage. To learn more about the Google Application Engine, go here: http://code.google.com/appengine/docs/whatisgoogleappengine.html

Read the article

Minidlna Directory Issues

- by Somnambulist

I've done my searching and can't find an answer to THIS specific issue. I have my minidlna set up and running - but it's not really done properly. First off, when I open the server on my bluray player, all of my movies are listed twice - when they are certainly not saved on my external twice. Second, when I open the server - rather than reading "Movies" "TV" "Music", etc - It just mashes all of my movies, tv, and some other folders all together with no real organization. I never had this problem when I had my Windows set up, so I know it's something configured improperly more-so than my external drive giving me gruff. Here's my minidlna.conf file: # This is the configuration file for the MiniDLNA daemon, a DLNA/UPnP-AV media # server. # # Unless otherwise noted, the commented out options show their default value. # # On Debian, you can also refer to the minidlna.conf(5) man page for # documentation about this file. media_dir=/media/somnambulist/Ghost In You # This option can be specified more than once if you want multiple directories # scanned. # # If you want to restrict a media_dir to a specific content type, you can # prepend the directory name with a letter representing the type (A, P or V), # followed by a comma, as so: # * "A" for audio (eg. media_dir=A,/var/lib/minidlna/music) # * "P" for pictures (eg. media_dir=P,/var/lib/minidlna/pictures) # * "V" for video (eg. media_dir=V,/var/lib/minidlna/videos) # # WARNING: After changing this option, you need to rebuild the database. Either # run minidlna with the '-R' option, or delete the 'files.db' file # from the db_dir directory (see below). # On Debian, you can run, as root, 'service minidlna force-reload' instead. #media_dir=/var/lib/minidlna media_dir=V,/media/somnambulist/Ghost In You/Movies media_dir=V,/media/somnambulist/Ghost In You/TV media_dir=P,/home/somnambulist/Pictures # Path to the directory that should hold the database and album art cache. db_dir=/home/somnambulist/serverart # Path to the directory that should hold the log file. log_dir=/home/somnambulist/serverlog # Minimum level of importance of messages to be logged. # Must be one of "off", "fatal", "error", "warn", "info" or "debug". # "off" turns of logging entirely, "fatal" is the highest level of importance # and "debug" the lowest. #log_level=warn # Use a different container as the root of the directory tree presented to # clients. The possible values are: # * "." - standard container # * "B" - "Browse Directory" # * "M" - "Music" # * "P" - "Pictures" # * "V" - "Video" # if you specify "B" and client device is audio-only then "Music/Folders" will be used as root root_container=B # Network interface(s) to bind to (e.g. eth0), comma delimited. #network_interface= # IPv4 address to listen on (e.g. 192.0.2.1). #listening_ip= # Port number for HTTP traffic (descriptions, SOAP, media transfer). port=8200 # URL presented to clients. # The default is the IP address of the server on port 80. #presentation_url=http://example.com:80 # Name that the DLNA server presents to clients. friendly_name=Somnambulist Media Server # Serial number the server reports to clients. serial=12345678 # Model name the server reports to clients. #model_name=Windows Media Connect compatible (MiniDLNA) # Model number the server reports to clients. model_number=1 # Automatic discovery of new files in the media_dir directory. #inotify=yes # List of file names to look for when searching for album art. Names should be # delimited with a forward slash ("/"). album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg/AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg/Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg # Strictly adhere to DLNA standards. # This allows server-side downscaling of very large JPEG images, which may # decrease JPEG serving performance on (at least) Sony DLNA products. #strict_dlna=no # Support for streaming .jpg and .mp3 files to a TiVo supporting HMO. #enable_tivo=no # Notify interval, in seconds. #notify_interval=895 # Path to the MiniSSDPd socket, for MiniSSDPd support. #minissdpdsocket=/run/minissdpd.sock` And here's the error I get in terminal when I run: sudo service minidlna restart sudo service minidlna force-reload Force restart error: Restarting DLNA/UPnP-AV media server minidlna [2013/08/12 21:19:27] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/Movies" not accessible! [Permission denied] [2013/08/12 21:19:27] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/TV" not accessible! [Permission denied] Force-reload error: Restarting DLNA/UPnP-AV media server minidlna [2013/08/12 21:19:46] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/Movies" not accessible! [Permission denied] [2013/08/12 21:19:46] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/TV" not accessible! [Permission denied] rm: cannot remove ‘/home/somnambulist/serverart/files.db’: Permission denied rm: cannot remove ‘/home/somnambulist/serverart/art_cache/media/somnambulist/Ghost In You/Movies/Slumdog Millionaire/Slumdog.Millionaire.Cover.jpg’: Permission denied rm: cannot remove ‘/home/somnambulist/serverart/art_cache/media/somnambulist/Ghost In You/Movies/Zack and Miri Make a Porno/ZackAndMiriMakeAPornoCover.jpg’: Permission denied [2013/08/12 21:19:46] minidlna.c:744: warn: Failed to clean old file cache. [ OK ] I've spent hours on this at this point, read through various files - and even had a friend who is relatively Ubuntu-savvy try to help me via chat - no such luck. Thanks in advance for any help.

Read the article

Connection Pooling is Busted

- by MightyZot

A few weeks ago we started getting complaints about performance in an application that has performed very well for many years. The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database. Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc. (PaperWise is a document management and workflow system.) A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler. All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero. After getting nowhere with SQL Profiler, the situation was escalated to me. I decided to take a peek with Process Monitor. Procmon revealed some “gaps” in the TCP/IP traffic. There were notable delays between send and receive pairs. The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send. You might expect some delay because, presumably, the application is doing some thinking in-between the pairs. But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed. Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms. Not only that, but connections to a file share containing images were taking 2 seconds! So, I asked about a trust. Sure enough there was a trust between two domains and the file share was on the second domain. Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share. Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets. TDS is the protocol that SQL Server uses to communicate. There is a certificate exchange and some SSL that occurs during authentication. All of this was evident in the network traffic. After staring at the network traffic for a while, and examining packets, I decided to call it a night. On the way home that night, something about the traffic kept nagging at me. Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well. Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port. After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports. SQL Server would execute a single query and respond on a port, then open a new port and execute the next query. Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis. Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop. Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection. After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors. Server-side cursors are the default, by the way. Voila! After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away. Believe it or not, this is actually documented by Microsoft, and rather difficult to find. (At least it was while we were trying to troubleshoot the problem!) So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor. If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries. I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries. In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two. Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem. Maybe they can explain to us why this is appropriate behavior. :)

Read the article

When to implement: Together with or after the source product?

- by Jeremy Oosthuizen

Somebody recently relayed a prospect's question to me: How hard would it be to implement OUBI after the source product (CC&B, WAM or NMS) has already been implemented? Fact is that MOST non-OUBI Data Warehouse / Business Intelligence implementations take place after the source application(s) are in place and hopefully stable. If an organization decides that they need better reporting and management information, then the logical path (see The Data Warehouse Institute's Data Warehouse Maturity Model) is to a Data Warehouse -- no matter when their last applications were implemented. If there is a pre-built Data Warehouse for their specific application, or even for the desired business process in their industry, they're in luck. Else they have to design and build from scratch, using a toolset. The implementation of a toolset is unlike the implementation of OUBI which, like OBI Apps, contain pre-built ETL routines and user content. Much has been written before about the advantages of that. So, because OUBI is designed specifically for Oracle Utilities transactional products, we often implement them in parallel -- with OUBI lagging a little behind by necessity, like Reporting. Customers know from the start they're going to need the solution, and therefore purchase the products at the same time. My biggest argument FOR a parallel installation/implementation of OUBI with the source product is two-fold: - There could be things (which is the technical term for data elements) that customers figure out they need when implementing OUBI, which are often easier added to the source product's implementation project, than to add later; - OUBI's ETL often points out errors (severe or not) with converted data, which are easier to fix during the source product's implementation project, or it may even be impossible to fix afterwards. The Conversion routines sometimes miss these errors, because the source system can live with the not-quite-perfect converted data. If the data can't be properly extracted, i.e. the proper Dimensions linked to the Facts, then it can't get into OUBI. That means it can't be analyzed effectively along with the rest of the organization's data. Then there is also the throw-away-work argument, which may be significant. The operational / transactional system cannot go live without reports on Day 1. A lot of those reports would be taken care of by the implementation of OUBI. If OUBI is implemented after go-live, those reports STILL have to be built during the source product's implementation project, but they become throw-away after the OUBI implementation. I have sometimes been told that it is better to implement OUBI after the source product, because it cuts down on scope and risk for the source product's implementation project. All I can say to that, is bah humbug. No, seriously, given the arguments above, planning has to include the OUBI implementation and it has to be managed properly -- just like any other implementation. If so, it should not add any risk and it should be included in the scope from the start. The answer to the prospect's question is therefore that it is not that much more difficult; after all, most DW/BI implemenations are done like that. They just have to consider the points above.

Read the article

Triangle Line-Segment Intersection - detecting near misses

- by Will

A ray is a very poor approximation of a player! I think approximating a player with a sphere traveling a straight line each game tick will solve my problems of the player intersecting edges of scenery because their line segment missed it yet their own model is not infinitely thin... I have a 3D triangle and a line segment. I have the normal triangle-line-segment intersection code which I admit I have only a woolly grasp of. To model movement and compute collisions of the player I have to determine if a line passes within sphere-radius of a triangle. But I can find no convenient line near-miss intersection code! Here's the classic triangle intersection ### commented ### code with my starting assumptions: function triangle_ray_intersection(a,b,c,ray_origin,ray_dir,ray_radius) { // http://softsurfer.com/Archive/algorithm_0105/algorithm_0105.htm#intersect_RayTriangle%28%29 // get triangle edge vectors and plane normal var u = vec3_sub(b,a); var v = vec3_sub(c,a); var n = vec3_cross(u,v); if(n[0]==0 && n[1]==0 && n[2]==0) return null; // triangle is degenerate var w0 = vec3_sub(ray_origin,a); var j = vec3_dot(n,ray_dir); if(Math.abs(j) < 0.00000001) { //### if parallel, might still pass within ray_radius of it return null; // parallel, disjoint or on plane } var i = -vec3_dot(n,w0); // get intersect point of ray with triangle plane var k = i / j; if(k < 0.0) return null; // ray goes away from triangle //### as its a line segment, k > 1+ray_radius means no intersect var hit = vec3_add(ray_origin,vec3_scale(ray_dir,k)); // intersect point of ray and plane // is I inside T? //### here I'm a bit lost; this is presumably computing barycentric coordinates? var uu = vec3_dot(u,u); var uv = vec3_dot(u,v); var vv = vec3_dot(v,v); var w = vec3_sub(hit,a); var wu = vec3_dot(w,u); var wv = vec3_dot(w,v); var D = uv * uv - uu * vv; var s = (uv * wv - vv * wu) / D; //### therefore, compute if its within ray_radius scaled to the 0..1 of barycentric coordinates? if(s<0.0 || s>1.0) return null; // I is outside T var t = (uv * wu - uu * wv) / D; if(t<0.0 || (s+t)>1.0) return null; // I is outside T //### finally, if it passses a barycentric test it might still be too far //### to a point; must check that its distance from a corner is within ray_radius too if more than one barycentric coord is >1 //### so we have rounded corners... return [hit,n]; // I is in T } Given the distance between the point of plane intersection and each corner, I ought to be able to determine distance at world scale of how far beyond the edge - beyond 1.0 in barycentric coordinates for each axis - that point is... At this point my head explodes! Is this the right track? What's the actual code? UPDATE: you can earn 100 pts on SO if you answer this question there...! How can you determine if a line segment passes within some distance of a triangle?

Read the article

Analysis Services (SSAS) - Unexpected Internal Error when processing (ProcessUpdate). Workaround/Resolution

- by James Rogers

Many implementations require the use of ProcessUpdate to support Type 1 slowly changing dimensions. ProcessUpdate drops all of the affected indexes and aggregations in partitions affected by data that changes in the Dimension on which the ProcessUpdate is being performed. Twice now I have had situations where the processing fails with "Internal error: An unexpected exception occurred." Any subsequent ProcessUpdate processing will also fail with the same error. In talking with Microsoft the issue is corrupt indexes for the Dimension(s) being processed in the partitions of the affected measure group. I cannot guarantee that the following will correct your problem but it did in my case and saved us quite a bit of down time. Workaround: ProcessIndexes on the entire cube that is being processed and throwing the error. This corrected the problem on both 2008 and 2008 R2. Pros: Does not require a complete rebuild of the data (ProcessFull) for either the Dimension or Cube. User access can continue while this ProcessIndexes in underway. Cons: Can take a long time, especially on large cubes with many partitions, dimensions and/or aggregations. Query Performance is usually severely impacted due to the memory and CPU requirements for Aggregation and Index building <Batch http://schemas.microsoft.com/analysisservices/2003/engine"http://schemas.microsoft.com/analysisservices/2003/engine"> <Parallel> <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"> <Object> <DatabaseID>MyDatabase</DatabaseID> <CubeID>MyCube</CubeID> </Object> <Type>ProcessIndexes</Type> <WriteBackTableCreation>UseExisting</WriteBackTableCreation> </Process> </Parallel> </Batch> The cube where the corruption exists can be found by having Profiler running while the ProcessUpdate is executing. The first partition that displays the "The Job has ended in failure." message in the TextData column will be part of the cube/measuregroup that has the corruption. You can try to run ProcessIndexes on just that measure group. This may correct the problem and save additional time if you have other large measure groups in the cube that are not affected by the corruption. Remember to execute your normal ProcessUpdate batch after the successful completion of the ProcessIndexes. The ProcessIndexes does not pick up data changes. Things that did not work: ProcessClearIndexes - why this doesn't work and ProcessIndexes does is unclear at this point. ProcessFull on the partition in question. In my latest case, this would clear up the problem for that partition. However, the next partition the ProcessUpdate touched that had data in it would generate and error. This leads me to believe the corruption problem will exist in all partitions in the affected measure group that have data in them. NOTE: I experience this problem in both a SQL 2008 and SQL 2008 R2 Analysis Services environment, on separate built from the same relational database. This leads me to believe that some data condition in the tables used for the Dimension processing caused the corruption since the two environments were on physically separate hardware. I am waiting on Microsoft to analyze the dumps to give us more insight into what actually caused the corruption and will update this post accordingly.

Read the article

ODI 11g – Oracle Multi Table Insert

- by David Allan

With the IKM Oracle Multi Table Insert you can generate Oracle specific DML for inserting into multiple target tables from a single query result – without reprocessing the query or staging its result. When designing this to exploit the IKM you must split the problem into the reusable parts – the select part goes in one interface (I named SELECT_PART), then each target goes in a separate interface (INSERT_SPECIAL and INSERT_REGULAR). So for my statement below… /*INSERT_SPECIAL interface */ insert all when 1=1 And (INCOME_LEVEL > 250000) then into SCOTT.CUSTOMERS_NEW (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) values (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) /* INSERT_REGULAR interface */ when 1=1 then into SCOTT.CUSTOMERS_SPECIAL (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) values (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) /*SELECT*PART interface */ select CUSTOMERS.EMAIL EMAIL, CUSTOMERS.CREDIT_LIMIT CREDIT_LIMIT, UPPER(CUSTOMERS.NAME) NAME, CUSTOMERS.USER_MODIFIED USER_MODIFIED, CUSTOMERS.DATE_MODIFIED DATE_MODIFIED, CUSTOMERS.BIRTH_DATE BIRTH_DATE, CUSTOMERS.MARITAL_STATUS MARITAL_STATUS, CUSTOMERS.ID ID, CUSTOMERS.USER_CREATED USER_CREATED, CUSTOMERS.GENDER GENDER, CUSTOMERS.DATE_CREATED DATE_CREATED, CUSTOMERS.INCOME_LEVEL INCOME_LEVEL from SCOTT.CUSTOMERS CUSTOMERS where (1=1) Firstly I create a SELECT_PART temporary interface for the query to be reused and in the IKM assignment I state that it is defining the query, it is not a target and it should not be executed. Then in my INSERT_SPECIAL interface loading a target with a filter, I set define query to false, then set true for the target table and execute to false. This interface uses the SELECT_PART query definition interface as a source. Finally in my final interface loading another target I set define query to false again, set target table to true and execute to true – this is the go run it indicator! To coordinate the statement construction you will need to create a package with the select and insert statements. With 11g you can now execute the package in simulation mode and preview the generated code including the SQL statements. Hopefully this helps shed some light on how you can leverage the Oracle MTI statement. A similar IKM exists for Teradata. The ODI IKM Teradata Multi Statement supports this multi statement request in 11g, here is an extract from the paper at www.teradata.com/white-papers/born-to-be-parallel-eb3053/ Teradata Database offers an SQL extension called a Multi-Statement Request that allows several distinct SQL statements to be bundled together and sent to the optimizer as if they were one. Teradata Database will attempt to execute these SQL statements in parallel. When this feature is used, any sub-expressions that the different SQL statements have in common will be executed once, and the results shared among them. It works in the same way as the ODI MTI IKM, multiple interfaces orchestrated in a package, each interface contributes some SQL, the last interface in the chain executes the multi statement.

Read the article

F# and the rose-tinted reflection

- by CliveT

We're already seeing increasing use of many cores on client desktops. It is a change that has been long predicted. It is not just a change in architecture, but our notions of efficiency in a program. No longer can we focus on the asymptotic complexity of an algorithm by counting the steps that a single core processor would take to execute it. Instead we'll soon be more concerned about the scalability of the algorithm and how well we can increase the performance as we increase the number of cores. This may even lead us to throw away our most efficient algorithms, and switch to less efficient algorithms that scale better. We might even be willing to waste cycles in order to speculatively execute at the algorithm rather than the hardware level. State is the big headache in this parallel world. At the hardware level, main memory doesn't necessarily contain the definitive value corresponding to a particular address. An update to a location might still be held in a CPU's local cache and it might be some time before the value gets propagated. To get the latest value, and the notion of "latest" takes a lot of defining in this world of rapidly mutating state, the CPUs may well need to communicate to decide who has the definitive value of a particular address in order to avoid lost updates. At the user program level, this means programmers will need to lock objects before modifying them, or attempt to avoid the overhead of locking by understanding the memory models at a very deep level. I think it's this need to avoid statefulness that has led to the recent resurgence of interest in functional languages. In the 1980s, functional languages started getting traction when research was carried out into how programs in such languages could be auto-parallelised. Sadly, the impracticality of some of the languages, the overheads of communication during this parallel execution, and rapid improvements in compiler technology on stock hardware meant that the functional languages fell by the wayside. The one thing that these languages were good at was getting rid of implicit state, and this single idea seems like a solution to the problems we are going to face in the coming years. Whether these languages will catch on is hard to predict. The mindset for writing a program in a functional language is really very different from the way that object-oriented problem decomposition happens - one has to focus on the verbs instead of the nouns, which takes some getting used to. There are a number of hybrid functional/object languages that have been becoming more popular in recent times. These half-way houses make it easy to use functional ideas for some parts of the program while still allowing access to the underlying object-focused platform without a great deal of impedance mismatch. One example is F# running on the CLR which, in Visual Studio 2010, has because a first class member of the pack. Inside Visual Studio 2010, the tooling for F# has improved to the point where it is easy to set breakpoints and watch values change while debugging at the source level. In my opinion, it is the tooling support that will enable the widespread adoption of functional languages - without this support, people will put off any transition into the functional world for as long as they possibly can. Without tool support it will make it hard to learn these languages. One tool that doesn't currently support F# is Reflector. The idea of decompiling IL to a functional language is daunting, but F# is potentially so important I couldn't dismiss the idea. As I'm currently developing Reflector 6.5, I thought it wise to take four days just to see how far I could get in doing so, even if it achieved little more than to be clearer on how much was possible, and how long it might take. You can read what happened here, and of the insights it gave us on ways to improve the tool.

Read the article

GlassFish Clustering with DCOM on Windows

- by ByronNevins

DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering. It is very difficult for users to get SSH configured properly on Windows. SSH does not come with Windows so we have to depend on third party tools. And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms. It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes. This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers. Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM. validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0). And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc. Later versions of Windows err on the side of tightening security be default. This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user. setup-local-dcom will assist you in making required changes to the Windows Registry. See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command. It should be run before any other commands. If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine. If validate-dcom runs successfully you can be confident that all the DCOM commands will work. Conversely, the opposite is also true: If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc. All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command. This means that you can track these commands easily on the remote machine with the usual tools. E.g. using AS_LOGFILE, looking at log files, etc. It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder. Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234 Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234. It will be running start-local-instance and patiently waiting for you to attach.

Read the article

Give a session on C++ AMP – here is how

- by Daniel Moth

Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads. "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Node.js Adventure - Storage Services and Service Runtime

- by Shaun

When I described on how to host a Node.js application on Windows Azure, one of questions might be raised about how to consume the vary Windows Azure services, such as the storage, service bus, access control, etc.. Interact with windows azure services is available in Node.js through the Windows Azure Node.js SDK, which is a module available in NPM. In this post I would like to describe on how to use Windows Azure Storage (a.k.a. WAS) as well as the service runtime. Consume Windows Azure Storage Let’s firstly have a look on how to consume WAS through Node.js. As we know in the previous post we can host Node.js application on Windows Azure Web Site (a.k.a. WAWS) as well as Windows Azure Cloud Service (a.k.a. WACS). In theory, WAWS is also built on top of WACS worker roles with some more features. Hence in this post I will only demonstrate for hosting in WACS worker role. The Node.js code can be used when consuming WAS when hosted on WAWS. But since there’s no roles in WAWS, the code for consuming service runtime mentioned in the next section cannot be used for WAWS node application. We can use the solution that I created in my last post. Alternatively we can create a new windows azure project in Visual Studio with a worker role, add the “node.exe” and “index.js” and install “express” and “node-sqlserver” modules, make all files as “Copy always”. In order to use windows azure services we need to have Windows Azure Node.js SDK, as knows as a module named “azure” which can be installed through NPM. Once we downloaded and installed, we need to include them in our worker role project and make them as “Copy always”. You can use my “Copy all always” tool mentioned in my last post to update the currently worker role project file. You can also find the source code of this tool here. The source code of Windows Azure SDK for Node.js can be found in its GitHub page. It contains two parts. One is a CLI tool which provides a cross platform command line package for Mac and Linux to manage WAWS and Windows Azure Virtual Machines (a.k.a. WAVM). The other is a library for managing and consuming vary windows azure services includes tables, blobs, queues, service bus and the service runtime. I will not cover all of them but will only demonstrate on how to use tables and service runtime information in this post. You can find the full document of this SDK here. Back to Visual Studio and open the “index.js”, let’s continue our application from the last post, which was working against Windows Azure SQL Database (a.k.a. WASD). The code should looks like this. 1: var express = require("express"); 2: var sql = require("node-sqlserver"); 3: 4: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:ac6271ya9e.database.windows.net,1433;Database=synctile;Uid=shaunxu@ac6271ya9e;Pwd={PASSWORD};Encrypt=yes;Connection Timeout=30;"; 5: var port = 80; 6: 7: var app = express(); 8: 9: app.configure(function () { 10: app.use(express.bodyParser()); 11: }); 12: 13: app.get("/", function (req, res) { 14: sql.open(connectionString, function (err, conn) { 15: if (err) { 16: console.log(err); 17: res.send(500, "Cannot open connection."); 18: } 19: else { 20: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 21: if (err) { 22: console.log(err); 23: res.send(500, "Cannot retrieve records."); 24: } 25: else { 26: res.json(results); 27: } 28: }); 29: } 30: }); 31: }); 32: 33: app.get("/text/:key/:culture", function (req, res) { 34: sql.open(connectionString, function (err, conn) { 35: if (err) { 36: console.log(err); 37: res.send(500, "Cannot open connection."); 38: } 39: else { 40: var key = req.params.key; 41: var culture = req.params.culture; 42: var command = "SELECT * FROM [Resource] WHERE [Key] = '" + key + "' AND [Culture] = '" + culture + "'"; 43: conn.queryRaw(command, function (err, results) { 44: if (err) { 45: console.log(err); 46: res.send(500, "Cannot retrieve records."); 47: } 48: else { 49: res.json(results); 50: } 51: }); 52: } 53: }); 54: }); 55: 56: app.get("/sproc/:key/:culture", function (req, res) { 57: sql.open(connectionString, function (err, conn) { 58: if (err) { 59: console.log(err); 60: res.send(500, "Cannot open connection."); 61: } 62: else { 63: var key = req.params.key; 64: var culture = req.params.culture; 65: var command = "EXEC GetItem '" + key + "', '" + culture + "'"; 66: conn.queryRaw(command, function (err, results) { 67: if (err) { 68: console.log(err); 69: res.send(500, "Cannot retrieve records."); 70: } 71: else { 72: res.json(results); 73: } 74: }); 75: } 76: }); 77: }); 78: 79: app.post("/new", function (req, res) { 80: var key = req.body.key; 81: var culture = req.body.culture; 82: var val = req.body.val; 83: 84: sql.open(connectionString, function (err, conn) { 85: if (err) { 86: console.log(err); 87: res.send(500, "Cannot open connection."); 88: } 89: else { 90: var command = "INSERT INTO [Resource] VALUES ('" + key + "', '" + culture + "', N'" + val + "')"; 91: conn.queryRaw(command, function (err, results) { 92: if (err) { 93: console.log(err); 94: res.send(500, "Cannot retrieve records."); 95: } 96: else { 97: res.send(200, "Inserted Successful"); 98: } 99: }); 100: } 101: }); 102: }); 103: 104: app.listen(port); Now let’s create a new function, copy the records from WASD to table service. 1. Delete the table named “resource”. 2. Create a new table named “resource”. These 2 steps ensures that we have an empty table. 3. Load all records from the “resource” table in WASD. 4. For each records loaded from WASD, insert them into the table one by one. 5. Prompt to user when finished. In order to use table service we need the storage account and key, which can be found from the developer portal. Just select the storage account and click the Manage Keys button. Then create two local variants in our Node.js application for the storage account name and key. Since we need to use WAS we need to import the azure module. Also I created another variant stored the table name. In order to work with table service I need to create the storage client for table service. This is very similar as the Windows Azure SDK for .NET. As the code below I created a new variant named “client” and use “createTableService”, specified my storage account name and key. 1: var azure = require("azure"); 2: var storageAccountName = "synctile"; 3: var storageAccountKey = "/cOy9L7xysXOgPYU9FjDvjrRAhaMX/5tnOpcjqloPNDJYucbgTy7MOrAW7CbUg6PjaDdmyl+6pkwUnKETsPVNw=="; 4: var tableName = "resource"; 5: var client = azure.createTableService(storageAccountName, storageAccountKey); Now create a new function for URL “/was/init” so that we can trigger it through browser. Then in this function we will firstly load all records from WASD. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: } 18: } 19: }); 20: } 21: }); 22: }); When we succeed loaded all records we can start to transform them into table service. First I need to recreate the table in table service. This can be done by deleting and creating the table through table client I had just created previously. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: // recreate the table named 'resource' 18: client.deleteTable(tableName, function (error) { 19: client.createTableIfNotExists(tableName, function (error) { 20: if (error) { 21: error["target"] = "createTableIfNotExists"; 22: res.send(500, error); 23: } 24: else { 25: // transform the records 26: } 27: }); 28: }); 29: } 30: } 31: }); 32: } 33: }); 34: }); As you can see, the azure SDK provide its methods in callback pattern. In fact, almost all modules in Node.js use the callback pattern. For example, when I deleted a table I invoked “deleteTable” method, provided the name of the table and a callback function which will be performed when the table had been deleted or failed. Underlying, the azure module will perform the table deletion operation in POSIX async threads pool asynchronously. And once it’s done the callback function will be performed. This is the reason we need to nest the table creation code inside the deletion function. If we perform the table creation code after the deletion code then they will be invoked in parallel. Next, for each records in WASD I created an entity and then insert into the table service. Finally I send the response to the browser. Can you find a bug in the code below? I will describe it later in this post. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: // recreate the table named 'resource' 18: client.deleteTable(tableName, function (error) { 19: client.createTableIfNotExists(tableName, function (error) { 20: if (error) { 21: error["target"] = "createTableIfNotExists"; 22: res.send(500, error); 23: } 24: else { 25: // transform the records 26: for (var i = 0; i < results.rows.length; i++) { 27: var entity = { 28: "PartitionKey": results.rows[i][1], 29: "RowKey": results.rows[i][0], 30: "Value": results.rows[i][2] 31: }; 32: client.insertEntity(tableName, entity, function (error) { 33: if (error) { 34: error["target"] = "insertEntity"; 35: res.send(500, error); 36: } 37: else { 38: console.log("entity inserted"); 39: } 40: }); 41: } 42: // send the 43: console.log("all done"); 44: res.send(200, "All done!"); 45: } 46: }); 47: }); 48: } 49: } 50: }); 51: } 52: }); 53: }); Now we can publish it to the cloud and have a try. But normally we’d better test it at the local emulator first. In Node.js SDK there are three build-in properties which provides the account name, key and host address for local storage emulator. We can use them to initialize our table service client. We also need to change the SQL connection string to let it use my local database. The code will be changed as below. 1: // windows azure sql database 2: //var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:ac6271ya9e.database.windows.net,1433;Database=synctile;Uid=shaunxu@ac6271ya9e;Pwd=eszqu94XZY;Encrypt=yes;Connection Timeout=30;"; 3: // sql server 4: var connectionString = "Driver={SQL Server Native Client 11.0};Server={.};Database={Caspar};Trusted_Connection={Yes};"; 5: 6: var azure = require("azure"); 7: var storageAccountName = "synctile"; 8: var storageAccountKey = "/cOy9L7xysXOgPYU9FjDvjrRAhaMX/5tnOpcjqloPNDJYucbgTy7MOrAW7CbUg6PjaDdmyl+6pkwUnKETsPVNw=="; 9: var tableName = "resource"; 10: // windows azure storage 11: //var client = azure.createTableService(storageAccountName, storageAccountKey); 12: // local storage emulator 13: var client = azure.createTableService(azure.ServiceClient.DEVSTORE_STORAGE_ACCOUNT, azure.ServiceClient.DEVSTORE_STORAGE_ACCESS_KEY, azure.ServiceClient.DEVSTORE_TABLE_HOST); Now let’s run the application and navigate to “localhost:12345/was/init” as I hosted it on port 12345. We can find it transformed the data from my local database to local table service. Everything looks fine. But there is a bug in my code. If we have a look on the Node.js command window we will find that it sent response before all records had been inserted, which is not what I expected. The reason is that, as I mentioned before, Node.js perform all IO operations in non-blocking model. When we inserted the records we executed the table service insert method in parallel, and the operation of sending response was also executed in parallel, even though I wrote it at the end of my logic. The correct logic should be, when all entities had been copied to table service with no error, then I will send response to the browser, otherwise I should send error message to the browser. To do so I need to import another module named “async”, which helps us to coordinate our asynchronous code. Install the module and import it at the beginning of the code. Then we can use its “forEach” method for the asynchronous code of inserting table entities. The first argument of “forEach” is the array that will be performed. The second argument is the operation for each items in the array. And the third argument will be invoked then all items had been performed or any errors occurred. Here we can send our response to browser. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: // recreate the table named 'resource' 18: client.deleteTable(tableName, function (error) { 19: client.createTableIfNotExists(tableName, function (error) { 20: if (error) { 21: error["target"] = "createTableIfNotExists"; 22: res.send(500, error); 23: } 24: else { 25: async.forEach(results.rows, 26: // transform the records 27: function (row, callback) { 28: var entity = { 29: "PartitionKey": row[1], 30: "RowKey": row[0], 31: "Value": row[2] 32: }; 33: client.insertEntity(tableName, entity, function (error) { 34: if (error) { 35: callback(error); 36: } 37: else { 38: console.log("entity inserted."); 39: callback(null); 40: } 41: }); 42: }, 43: // send reponse 44: function (error) { 45: if (error) { 46: error["target"] = "insertEntity"; 47: res.send(500, error); 48: } 49: else { 50: console.log("all done"); 51: res.send(200, "All done!"); 52: } 53: } 54: ); 55: } 56: }); 57: }); 58: } 59: } 60: }); 61: } 62: }); 63: }); Run it locally and now we can find the response was sent after all entities had been inserted. Query entities against table service is simple as well. Just use the “queryEntity” method from the table service client and providing the partition key and row key. We can also provide a complex query criteria as well, for example the code here. In the code below I queried an entity by the partition key and row key, and return the proper localization value in response. 1: app.get("/was/:key/:culture", function (req, res) { 2: var key = req.params.key; 3: var culture = req.params.culture; 4: client.queryEntity(tableName, culture, key, function (error, entity) { 5: if (error) { 6: res.send(500, error); 7: } 8: else { 9: res.json(entity); 10: } 11: }); 12: }); And then tested it on local emulator. Finally if we want to publish this application to the cloud we should change the database connection string and storage account. For more information about how to consume blob and queue service, as well as the service bus please refer to the MSDN page. Consume Service Runtime As I mentioned above, before we published our application to the cloud we need to change the connection string and account information in our code. But if you had played with WACS you should have known that the service runtime provides the ability to retrieve configuration settings, endpoints and local resource information at runtime. Which means we can have these values defined in CSCFG and CSDEF files and then the runtime should be able to retrieve the proper values. For example we can add some role settings though the property window of the role, specify the connection string and storage account for cloud and local. And the can also use the endpoint which defined in role environment to our Node.js application. In Node.js SDK we can get an object from “azure.RoleEnvironment”, which provides the functionalities to retrieve the configuration settings and endpoints, etc.. In the code below I defined the connection string variants and then use the SDK to retrieve and initialize the table client. 1: var connectionString = ""; 2: var storageAccountName = ""; 3: var storageAccountKey = ""; 4: var tableName = ""; 5: var client; 6: 7: azure.RoleEnvironment.getConfigurationSettings(function (error, settings) { 8: if (error) { 9: console.log("ERROR: getConfigurationSettings"); 10: console.log(JSON.stringify(error)); 11: } 12: else { 13: console.log(JSON.stringify(settings)); 14: connectionString = settings["SqlConnectionString"]; 15: storageAccountName = settings["StorageAccountName"]; 16: storageAccountKey = settings["StorageAccountKey"]; 17: tableName = settings["TableName"]; 18: 19: console.log("connectionString = %s", connectionString); 20: console.log("storageAccountName = %s", storageAccountName); 21: console.log("storageAccountKey = %s", storageAccountKey); 22: console.log("tableName = %s", tableName); 23: 24: client = azure.createTableService(storageAccountName, storageAccountKey); 25: } 26: }); In this way we don’t need to amend the code for the configurations between local and cloud environment since the service runtime will take care of it. At the end of the code we will listen the application on the port retrieved from SDK as well. 1: azure.RoleEnvironment.getCurrentRoleInstance(function (error, instance) { 2: if (error) { 3: console.log("ERROR: getCurrentRoleInstance"); 4: console.log(JSON.stringify(error)); 5: } 6: else { 7: console.log(JSON.stringify(instance)); 8: if (instance["endpoints"] && instance["endpoints"]["nodejs"]) { 9: var endpoint = instance["endpoints"]["nodejs"]; 10: app.listen(endpoint["port"]); 11: } 12: else { 13: app.listen(8080); 14: } 15: } 16: }); But if we tested the application right now we will find that it cannot retrieve any values from service runtime. This is because by default, the entry point of this role was defined to the worker role class. In windows azure environment the service runtime will open a named pipeline to the entry point instance, so that it can connect to the runtime and retrieve values. But in this case, since the entry point was worker role and the Node.js was opened inside the role, the named pipeline was established between our worker role class and service runtime, so our Node.js application cannot use it. To fix this problem we need to open the CSDEF file under the azure project, add a new element named Runtime. Then add an element named EntryPoint which specify the Node.js command line. So that the Node.js application will have the connection to service runtime, then it’s able to read the configurations. Start the Node.js at local emulator we can find it retrieved the connections, storage account for local. And if we publish our application to azure then it works with WASD and storage service through the configurations for cloud. Summary In this post I demonstrated how to use Windows Azure SDK for Node.js to interact with storage service, especially the table service. I also demonstrated on how to use WACS service runtime, how to retrieve the configuration settings and the endpoint information. And in order to make the service runtime available to my Node.js application I need to create an entry point element in CSDEF file and set “node.exe” as the entry point. I used five posts to introduce and demonstrate on how to run a Node.js application on Windows platform, how to use Windows Azure Web Site and Windows Azure Cloud Service worker role to host our Node.js application. I also described how to work with other services provided by Windows Azure platform through Windows Azure SDK for Node.js. Node.js is a very new and young network application platform. But since it’s very simple and easy to learn and deploy, as well as, it utilizes single thread non-blocking IO model, Node.js became more and more popular on web application and web service development especially for those IO sensitive projects. And as Node.js is very good at scaling-out, it’s more useful on cloud computing platform. Use Node.js on Windows platform is new, too. The modules for SQL database and Windows Azure SDK are still under development and enhancement. It doesn’t support SQL parameter in “node-sqlserver”. It does support using storage connection string to create the storage client in “azure”. But Microsoft is working on make them easier to use, working on add more features and functionalities. PS, you can download the source code here. You can download the source code of my “Copy all always” tool here. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Can't connect to Wired Network after installing 12.04

- by ezz9

I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

Read the article

How to Play PC Games on Your TV

- by Chris Hoffman

No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV. Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

Read the article

SQL Azure: Notes on Building a Shard Technology

- by Herve Roggero

In Chapter 10 of the book on SQL Azure (http://www.apress.com/book/view/9781430229612) I am co-authoring, I am digging deeper in what it takes to write a Shard. It's actually a pretty cool exercise, and I wanted to share some thoughts on how I am designing the technology. A Shard is a technology that spreads the load of database requests over multiple databases, as transparently as possible. The type of shard I am building is called a Vertical Partition Shard (VPS). A VPS is a mechanism by which the data is stored in one or more databases behind the scenes, but your code has no idea at design time which data is in which database. It's like having a mini cloud for records instead of services. Imagine you have three SQL Azure databases that have the same schema (DB1, DB2 and DB3), you would like to issue a SELECT * FROM Users on all three databases, concatenate the results into a single resultset, and order by last name. Imagine you want to ensure your code doesn't need to change if you add a new database to the shard (DB4). Now imagine that you want to make sure all three databases are queried at the same time, in a multi-threaded manner so your code doesn't have to wait for three database calls sequentially. Then, imagine you would like to obtain a breadcrumb (in the form of a new, virtual column) that gives you a hint as to which database a record came from, so that you could update it if needed. Now imagine all that is done through the standard SqlClient library... and you have the Shard I am currently building. Here are some lessons learned and techniques I am using with this shard: Parellel Processing: Querying databases in parallel is not too hard using the Task Parallel Library; all you need is to lock your resources when needed Deleting/Updating Data: That's not too bad either as long as you have a breadcrumb. However it becomes more difficult if you need to update a single record and you don't know in which database it is. Inserting Data: I am using a round-robin approach in which each new insert request is directed to the next database in the shard. Not sure how to deal with Bulk Loads just yet... Shard Databases: I use a static collection of SqlConnection objects which needs to be loaded once; from there on all the Shard commands use this collection Extension Methods: In order to make it look like the Shard commands are part of the SqlClient class I use extension methods. For example I added ExecuteShardQuery and ExecuteShardNonQuery methods to SqlClient. Exceptions: Capturing exceptions in a multi-threaded code is interesting... but I kept it simple for now. I am using the ConcurrentQueue to store my exceptions. Database GUID: Every database in the shard is given a GUID, which is calculated based on the connection string's values. DataTable. The Shard methods return a DataTable object which can be bound to objects. I will be sharing the code soon as an open-source project in CodePlex. Please stay tuned on twitter to know when it will be available (@hroggero). Or check www.bluesyntax.net for updates on the shard. Thanks!

Read the article

HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

- by Marek L.

I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

Read the article

Give a session on C++ AMP – here is how

- by Daniel Moth

Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads. "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

boot issues - long delay, then "gave up waiting for root device"

- by chazomaticus

I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

Search Results

Search found 11826 results on 474 pages for 'parallel port'.

Page 180/474 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187 | Next Page >

- by pavun_cool

- by Senne

- by chobo2

- by Reed

- by Kevin Shyr

- by Daniel Moth

- by tacone

- by simonsabin

- by rajbk

- by Somnambulist

- by MightyZot

- by Jeremy Oosthuizen

- by Will

- by James Rogers

- by David Allan

- by CliveT

- by ByronNevins

- by Daniel Moth

- by Shaun

- by ezz9

- by Chris Hoffman

- by Herve Roggero

- by Marek L.

- by Daniel Moth

- by chazomaticus

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187 | Next Page >