Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 180/232 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

  • Problems with Intel Video Resolution on Acer Laptop Wide Display

    - by ricstr
    I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

    Read the article

  • If I install Ubuntu 12.04, will it recognize all of my RAM?

    - by user91048
    I have a question that's been bugging me since a long time. A friend of mine told me that when he had Ubuntu 11.10 installed the OS only recognized 3.4GB instead of 8GB. In the next week I'll be buying a new computer and I'll have 8GB of RAM, does the Video Card need to have it's own video memory for the OS to recognize the RAM entirely?. If you could give me some advise on how to configure my PC before I buy it it would be great. Thanks. Tengo una duda que me ronda de hace tiempo. Un amigo mio me comento que con ubuntu 11.10 tenia 8 gb de RAM y que solo le reconocia 3.4. Dentro de unos 5 dias me comprare un ordenador nuevo a base de componentes y voy a meterle 8 gb de RAM. ¿Hace falta que la tarjeta gráfica tenga Gb dedicados para que el sistema me reconozca la RAM entera? Si podeis darme algunos consejillos sobre como configurar el PC antes de comprarmelo para que ese problema no me pase, Muchisimas Gracias.

    Read the article

  • System in low-graphics mode

    - by Artem Moskalev
    I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

    Read the article

  • 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

    - by Navraj
    Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

    Read the article

  • Can't shutdown Ubuntu (Wubi Installation)

    - by zsgre3nd3s7
    I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

    Read the article

  • How do you explain to an "agile" team that they still need to plan the software they write?

    - by user23157
    This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

    Read the article

  • Is there such thing as a "theory of system integration"?

    - by Jeff
    There is a plethora of different programs, servers, and in general technologies in use in organizations today. We, programmers, have lots of different tools at our disposal to help solve various different data, and communication challenges in an organization. Does anyone know if anyone has done an serious thinking about how systems are integrated? Let me give an example: Hypothetically, let's say I own a company that makes specialized suits a'la Iron Man. In the area of production, I have CAD tools, machining tools, payroll, project management, and asset management tools to name a few. I also have nice design space, where designers show off their designs on big displays, some touch, some traditional. Oh, and I also have one of these new fangled LEED Platinum buildings and it has number of different computer controlled systems, like smart window shutters that close when people are in the room, a HVAC system that adjusts depending on the number of people in the building, etc. What I want to know is if anyone has done any scientific work on trying to figure out how to hook all these pieces together, so that say my access control system is hooked to my payroll system, and my phone system allowing my never to swipe a time card, and to have my phone follow me throughout the building. This problem is also more than a technology challenge. Every technology implementation enables certain human behaviours, so the human must also be considered as a part of the system. Has anyone done any work in how effectively weave these components together? FYI: I am not trying to build a system. I want to know if anyone has thoroughly studied the process of doing a large integration project, how they develop their requirements, how they studied the human behaviors, etc.

    Read the article

  • How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

    - by shaggyjack
    Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

    Read the article

  • How do I install 10.04 on a Vortex86DX embdedded system?

    - by mathematician1975
    I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

    Read the article

  • Sound in Ubuntu 12.10 on Chromebook

    - by Paul Mennega
    I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

    Read the article

  • Is this a dual monitor reset bug?

    - by Tentresh
    My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

    Read the article

  • Setting up dual monitors, Xorg.conf issues

    - by JTS
    I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

    Read the article

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • IIM Calcutta &ndash; EPBM14 &ndash; Campus Visit &ndash; Day 3 &ndash; Kali Temple, IS &amp; Strateg

    - by Ram Shankar Yadav
    Hey folks~ Today was one of the most happening day for us, we got up @ 5 AM and did our daily morning chores and left hostel room by 5:35 AM. So why we got up so early??? Okay we planned a visit to Kali Temple at KaliGhat! So till everyone assembles, we took few pics on the Lake Deck. We left Joka campus at 6 AM and reached Kali temple at 6:50 AM. Kali temple is very famous in Kolkata, but the frankly speaking it’s one of the most unorganised one for sure~! After darshan, we got back into our Taxis and headed for breakfast at Gupta Brothers Restaurant. We enjoyed “doodh-jalebi”, “Kachori-sabzi” and rasogullas there~! While coming back, one of our Taxi’s excel broken and we waited for the first to come back and take us to Campus. After coming back to campus, we attended our sessions on IS & Strategy on ITC eChaupal and Transactional Cost and Vertical Integration(TCVI). After our classed we had “Dinner Party” organised by IIMC, and we enjoyed it thoroughly, and many of us took this as an opportunity to share our biz card and talk to Professors. Overall it’s was a rocking day!! Stay tuned for more… Cheers, ram :)   Photo Album :

    Read the article

  • Resolution stuck in 640x480 in grub, 11.04 and 12.04

    - by user89797
    I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

    Read the article

  • hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

    - by user108754
    I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

    Read the article

  • Intermittent ethernet connectivity

    - by Amey Jah
    I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

    Read the article

  • Now Available: Profit November 2012

    - by user462779
    The November 2012 issue of Profit is now available. In the five years I've worked on Profit, there has been measurable interest in content related to project management. Stories featuring project management as a key component have resulted in extra clicks, likes, and RTs (for you Twitter users) from our readers. I've chatted about this with Oracle customers, partners, and experts and received an assortment of ideas about why this might be. This issue of Profit is a bit of a culmination of those conversations, and the trends that are driving interest in project management best practices. Also, two online developments for Profit: check out my newly relaunched blog, Editor's Notebook, at blogs.oracle.com/profit, where readers can get a peek at the development of each issue of Profit as it happens. We've also launched a new LinkedIn group for our social media-inclined readers. In this issue: Three Keys to Project Management What can organizations with world-class project management teach the rest of us? Strong Medicine Gilead Sciences simplifies business processes to establish a foundation for continued growth. Architects of Reform Enterprise architecture plays an essential role in establishing Oregon as a leader in healthcare reform. Answering the Call Turkcell CIO Ilker Kuruoz finds IT-powered growth and innovation to be the calling card for success. Projected Results Sound project management practices and technology can have an immediate impact on the bottom line. Preparing for Impact Plans for dealing with enterprise information will define the big data winners. Is one issue of Profit not enough to get you through to February? Visit the Profit archives, or follow @OracleProfit on Twitter for a daily dose of enterprise technology news from Profit.

    Read the article

  • NVIDIA Graphics - resolution problems with new 12.04 LTS installation

    - by Daveisuser56810
    I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

    Read the article

  • 14.04 LTS Unity no longer boots after last 94 MB update

    - by Harryg123
    I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

    Read the article

  • Should ATI catalyst be installed for sake of openCL?

    - by G Sree Teja Simha
    I have a HP Envy 4 1025tx with Hybrid graphics. Although this is a 64bit system, I've installed 32bit Ubuntu on it for some reasons.(Hybrid graphics don't do well with 64bit Ubuntu.-"Some one on some forum") I had heating problems with the GPU but I've fixed them all with vgaswitcheroo. But now I wanted to use my Blender on my Ubuntu. To my surprise Blender didn't detect the dedicated 7670m card in my machine. I've confirmed with cat /sys/kernel/debug/vgaswitcheroo/switch Both IGD and DIS were up and running. I dont seem to have libopencl on my /usr/lib even though my synaptic manager says that I have installed it. I'm not quite sure what I've installed. It says that I've installed "ocl-icd-libopencl1". So my question is... Do I have opencl on my system? If not do I have to get propreitary ATI drivers for sake of opencl(fglrx wrecks up my unity totally on my system I need directions to fix it if this is the choice)? Should I get a 64bit Ubuntu installed on this system?

    Read the article

  • CUDA & MSI GT60 with Optimus enabled GTX670M?

    - by user1076693
    I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

    Read the article

  • The MsC gray zone: How to deal with the "too unexperienced on engineering/too under-qualified for research" situation?

    - by Hunter2
    Last year I've got a MsC degree on CS. On the beginning of the MsC course, I was keen on moving on with research and go for a PhD. However, as the months passed, I started to feel the urge to write software that people would, well, actually use. The programming bug had bitten me, again. So, I decided that before deciding on getting a PhD degree, I would spend some time on the "real world", working as a software developer. Sadly, most companies here in Brazil are "services" companies that seem to be stuck on the 80s when it comes to software development. I have to fend off pushy managers, less-than-competent coworkers and outrageous software requirements (why does everyone seem to need a 50k Oracle license and a behemoth Websphere AS for their CRUD applications?) on a daily basis, and even though I still love software development, the situation is starting to touch a nerve. And, mind you, I'm already lucky for getting a job at a place that isn't a plain software sweatshop. Sure, there are better places around here or I could always try my luck abroad, but then I hit the proverbial brick wall: Sorry, you're too unexperienced as a developer and too under-qualified as a researcher I've already heard this, and variations of that, multiple times. Research position recruiters look for die-hard, publication-ridden, rockstar PhDs, while development position recruiters look for die-hard, experience-ridden, rockstar programmers. To most, my MsC degree seems like a minor bump on my CV (and an outright waste of time for some). Applying for abroad positions is even harder, since the employer would have to deal of the hassle of a VISA process, which I understand that, sometimes, is too much. Now I'm feeling I've reached a dead-end. I'm certain that development (and not research) is my thing, so should I just dismiss my MsC (or play it as a "trump card") and play the "big fish on a small pond" role while I gather some experience and contribute on some open-source projects as a plus? Is there a better way to handle this?

    Read the article

  • Screen doesn't turn back on after resume on a Lenovo Thinkpad T420

    - by Wojtek
    Every time I suspend my notebook (Lenovo Thinkpad T420 - Intel HD graphic card) on Oneiric Ocelot 11.10 and turn it back on, the screen is black. The backlight is on and the system itself loads fine, but the display somehow doesn't get back. The first time after a fresh reboot the screen isn't black, it is mostly white/light-gray and it looks a bit like a distorted image. The pixels fade in until it gets almost completely light-gray. I've got a workaround for this: I switch to the first terminal (CTRL+ALT+F1) and back to X (CTRL+ALT+F7). In most cases that helps. Sometimes, when there's still a problem, I log in on the first terminal and run "unity --reset". Then go back to X - this helps always. I can tell that the system comes back, because I can log in with my fingerprint reader (or wait a bit and put in the password) "blindly", then do the workaround - I am logged in after the screen comes back. So it's only the display that is not working. Any help or advice where to look would be appreciated.

    Read the article

  • Best of OTN - Week of November 4th

    - by CassandraClark-OTN
    It was another exciting week at OTN!  Lots of GREAT content to share.  If you had a favorite that you don't see listed let us know in the comment section below.  Java Community - JavaOne Sessions Online - We've posted 60 of the JavaOne sessions online, and we'll be rolling out more sessions every few weeks. This content is free, courtesy of Oracle.NetBeans 7.4 Released  - NetBeans 7.4 features HTML5 integration for Java EE and PHP development; support for Apache Cordova and JDK 8 preview features; enhancements to Maven, C/C++, and more.vJUG: Worldwide Virtual JUG Created - London Java Community leader and technical evangelist Simon Maple has created a Meetup called vJUG, with aim toward connecting Java Developers in the virtual world.Tori Wieldt, Java Community Manager Friday Funny: This is what REALLY happens when you give someone your business card ow.ly/q6aKUArchitect Community - Don't forget to register for the free Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence.  December 3rd, 2013 - Two great tracks, Design & Develop and Build, Deploy & Manage.   Why wait, register now!  Multi-Factor Authentication in Oracle WebLogic - Shailesh K. Mishra - Really good technical article on using multi-factor authentication to protect web applications deployed on Oracle WebLogic.Coherence*Web: Sharing an httpSessions Among Applications in Different Oracle WebLogic Clusters - Jordi VillenaUnderstanding when and how to select session attributes that must be stored in the local storage of the Oracle WebLogic instances and which should be leveraged to an Oracle Coherence distributed cache.  Bob Rhubart, Architect Community Manager Friday Funny - "Be yourself, everyone else is already taken." Oscar Wilde (October 16, 1854 - November 30, 1900) Irish writer and poet.

    Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >