Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 181/252 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• How does one go about fixing a pixelation issue?

  - by Tyler

  I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

  Read the article

• Setup dual screen with Catalyst Control Center on notebook so that nothing changes when closing lid (case) ?

  - by Tom

  I have setup a dualscreen setup for my notebook with an ATI video card (ATI mobility radeon hd 5470) using Catalyst Control Center. The monitor extends the desktop of the notebook's screen. This works great. I am running on windows 7 and have set it up to not do anything when I close my laptop's lid (case) other than dim the notebook's display. However, when I do close the lid (notebook's display), the second monitor suddenly changes and I believe it starts behaving as the primary monitor.. I do not want this to happen. So, how do I setup my dualscreen setup so that it won't set the secondary monitor as the primary one when I close my laptop's lid? UPDATE: this video shows exactly what my problem is: http://www.youtube.com/watch?v=Q1ygNHbqI2g

  Read the article

• Wifilink 5100 AGN mass update

  - by ripwads

  We are using a Meru enterprise wireless network with 180 APs. Recently, many users connections are dropping frequently. After much troubleshooting, we have determined much of the trouble is due to some settings in the advanced properties of the wireless nic on our notebooks. Now we want to send out the changes in a Zenworks bundle, but I cannot find these settings in the registry or anywhere we might be able to send out as a remote package. Does anyone know where to find these settings for an Intel wifilink 5100 card other that the NIC properties itself? We really do not want to manually configure 600 notebooks.

  Read the article

• How OS comunicates with HW?

  - by Jack

  Hi, how can program runnig on CPU (mostly OS) acess other PC hardware? Such as Graphic card, HDD and so? From what I read, In DOS, this was done using BIOS calls, specifically INT instruction. But, int instruction should only jump to the certain space in RAM. So, how can some program stored in RAM acess other computer HW, when CPU can acess only RAM, and reeive interrupts? And, does windows use int instructions as well, or is there any new way to communicate with HW? Thanks.

  Read the article

• VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

  - by Chris Miller

  Firstly, is this possible? The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual server with one network card running windows server 2008r2. I need to set up a site-to-site style VPN using IPsec between the firewall of one ISP and the windows host on the other (gateway-to-host). This host has to run a SQL-Server that I can access from the other ISP's servers through the VPN tunnel. It seems looking at the RFC for IPsec that this should be possible using the features of Windows 2008, but I can't get it to work so far... It seems that I can't access any services running on the same computer or IP address used as the tunnel endpoint? Thanks Chris

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Can I use only a HDMI monitor?

  - by Felix

  I recently found out there are such things as PC monitors with TV capabilities (or TVs that can be PC monitors), and the idea kind of tickles my fancy. I'm thinking of getting one of these gadgets, and if I do, I will connect it to my PC via HDMI (my graphics card has builtin HDMI), so that I also get sound to the TV. The reason for this is because I have a 2.1 sound system which I want to use both on the PC and the TV. Basically, I want the configuration to look like this: Cable --------> TV --> 2.1 Sound System PC --HDMI--> TV --> 2.1 Sound System My question is: can I use a setup like this? Can I not have a classic VGA monitor? Will I be able to see non-graphical interfaces (such as the BIOS, GRUB, a Linux terminal, ...) through HDMI on the TV? I use Windows 7 and Ubuntu.

  Read the article

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• how to reinstall Asus notebook using Recovery DVD?

  - by Radek

  a friend of mine asked to reinstall his Asus notebook. He didn't want Vista anymore so I installed XP. Re-partitioned the hdd (no more recovery partition). Everything went fine except I cannot make LAN card work. I created a question for that. And I talked to Asus help desk but it didn't help so we decided to go back to Vista. I have the original Recovery DVD for his notebook. With files like ASUS.SWM and ASUS2.SWM. But I do not know how to use this DVD to reinstall his notebook. Did I mention that his DVD drive mostly doesn't work?

  Read the article

• Why does my laptop shut down, does it get too hot?

  - by Kevin P.

  When I play games, or use powerful-applications such as Autodesk Maya, my laptop just shuts down, ofcourse without any warning at all. This is what I've tried so far: Cleaned my fan, completely! Checked if I have enough RAM and good enough graphics card, and I do. (6 GB RAM, Nvidia GeForce GT540M with 2 GB VRAM) None of these options worked. Even tried to clean my fan twice! Now, I have some options I could also try, but I don't know if that have anything to do with it or not. I was thinking reinstalling my Windows 7, because maybe it has to do something wrong with the installation? My laptop is about a year old, and this problem just happend out of no where, short after I downgraded from Windows 8 Release Preview to my original Windows 7.

  Read the article

• Can't change picture import settings in Windows 7

  - by Joel in Gö

  I have foolishly set the picture import settings wrongly for when a camera card is put in my computer. It correctly asks me whether I would like to import the pictures using Windows picture import, and when I click on this option it flashes up the "import pictures" dialog very briefly, and then immediately gets on with importing the pictures to the wrong place. I simply want to click on the "import settings" link on the dialog - but it's too quick for me, and even if I do manage it it just ignores me. Windows Help, useful as ever, tells me to click on the link :) Any ideas? Thanks!

  Read the article

• How do I connect to my home's primary wired network through an extra (wireless) router?

  - by Matthew Patrick Cashatt

  Thanks for looking! I have set up a desktop PC in my workshop. The Cat 5 cable connects from this PC to a wireless router which is connected to my home network. The Internet connection is working just fine. However, the "wired" network this is on shows up as a different wired network than the one that the PCs inside my house are connected to. This is a problem because I would like to connect this workshop PC to various shared resources like printers, HD Homerun (cable tv card), shared drives, etc. When I go to "Network and Sharing" and attempt to find the network that the PCs inside my home are connected to, I don't see it. Any help is appreciated. Thanks!

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

  - by patricksweeney

  I have a Samsung Series 7 with the Radeon 6750M switchable graphics. The ATI software lets you force programs to use the dedicated card. However, I'm not convinced it is actually ever using it, as the frame rates on some non-taxing games (Portal, TF2) are merely OK. To make matters worse, it looks like the ATI Catalyst Control has vanished from my laptop. To make it even worse, you can't download the driver and ATI CCC from ATI's site, you need to download it from Samsung, and the ZIP they provide is corrupted. How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• Enterprise laptop doesn't recognize WiFi

  - by Michiel

  My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

  Read the article

• Frame rate upsampling codec/player/software?

  - by djechelon

  Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

  Read the article

• Windows 7 Line In Delay Issue [closed]

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• VirtualBox cloned Ubuntu Server network error

  - by Luke

  I run a number of virtual servers on my network and I want to be able to easily clone base installations of Ubuntu Server. I use the VBoxManage command to clone the actual hard disk and I then create a new profile for my VM and copy over the settings of the original VM. However, when I boot into the cloned VM, there seems to be a network problem. When I issue a PING I get the message "Network unreachable". I traced it down to the fact that the virtual network card of the cloned VM has a different MAC address then the original VM. When I copy the MAC address the clone seems to work fine. How can I have the cloned VM have it's own MAC address?

  Read the article

• Is there any way I can use two monitors in the console in Linux?

  - by Alex

  I have recently become the proud owner of two monitors in my workspace. (Ok not owner, but you know what I mean) and I'd like to use both of them at once. Problem is, I much much prefer to use a Linux Server console over a desktop environment. The graphics card on the machine is a GTX295 (don't ask why, it's a long story.) so I essentially have two graphics cards. Each has a DVI output. Is there any way I can get the console to stretch across two screens? Or will I have to install a desktop Ubuntu for this to work?

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >