Search Results

Search found 70827 results on 2834 pages for 'data quality services'.

Page 181/2834 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• Using VLANs/subnetting to separate management from services?

  - by YouAreTheHat

  Background: I recently purchased a server and a managed switch for my home in the hopes of getting more experience and some fun toys to play with. The devices and appliances I either have or plan to have cover a broad spectrum: router, DD-WRT AP, Dell switch, OpenLDAP server, FreeRADIUS server, OpenVPN gateway, home PCs, gaming consoles, etc. I intend to segment my network with VLANs and associated subnets (e.g., VID10 is populated by devices on 192.168.10.0/24). The idea is to secure the more sensitive appliances by forcing traffic through my router/FW. Setup: After thinking and planning for some time, I have tentatively decided on 4 VLANs: one for the WAN connection, one for servers, one for home/personal devices, and one for management. In theory, the home VLAN will have limited access to the servers, and the management VLAN will be totally isolated for security. Question: Since I want to restrict access to management interfaces, but some appliances have to be accessible to other devices, is it possible/wise to have only management (SSH, HTTP, RDP) available on one VLAN/IP and only services (LDAP, DHCP, RADIUS, VPN) available on other? Is this a thing that is done? Does it gain me the security I think it does, or hurt me in some way?

  Read the article

• Running multiple services on different servers with IPv6 and a FQDN

  - by Mark Henderson

  One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

  Read the article

• Restoring an Ubuntu Server using ZFS RAIDZ for data

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own Home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and ZFS (OS on 1 Ext4 disk, Data on 3 RAIDZ disks). As Joel Spolsky and Geoff Atwood say with regards to backup, I can't rest until I have done a restore in all of the failure scenarios that I am seeking to protect against. Q: How to configure Ubuntu Server to recognise a pre-existing RAIDZ array? Clearly if one of the data disks die - then that is a resilvering scenario, which is well documented. If two of the data disks die, then I am into regular backup/restore land. If the OS dies and I can restore, also an easy scenario. But if the OS dies and I can't restore, then I need to recreate an Ubuntu server. But how do I get this to recognise my RAID-Z array? Is the necessary configuration information stored within and across the RAIZ array and simply need to be found (if so, how)? Or does it reside on the OS ext4 disk (in which case how do I recreate it)?

  Read the article

• Can I use Ubuntu One to sync data fiies between two remote computers

  - by Sleepy John

  I've got two computers, both running Ubuntu with files in their home folders sync'd in to Ubuntu One. I'd like to know if it's possible to make Ubuntu One automatically download data changes that have been uploaded automatically to Ubuntu One from one computer to the equivalent data file in the other. Clarifying a bit further, I've installed Red Notebook in both computers and so they each have their own /.rednotebook/data folder containing a series of .txt files corresponding to the monthly entries in each of them. These are sync'd to upload any changes to those .txt files to Ubuntu One. My question is can I, and if so how, do I make Ubuntu One automatically download and replace those .txt files in the other computer after they've been updated and uploaded from the first computer? I did labouriously manage to download all those text files which had been uploaded from the first computer, from Ubuntu One one-by-one to the second computer, but what I want to do is automate this process and that's where I'm stuck. I'm aware that things could get a bit complicated if both my computers were on-line at the same time and both were simultaneously making different Red Notebook entries, so that's not the scenario I'm trying to cover. All I want to achieve is that whatever updates to the files have been uploaded by one computer, will automatically be downloaded to the same-named files in the other computer as soon as that second computer appears on line and detects that Ubuntu One has matching but more recent sync'd files than the ones it's holding.

  Read the article

• AT&T’s new prepaid plan for smartphones –$65 for 1 GB data and unlimited calls, text

  - by Gopinath

  AT&T is stepping up competition in prepaid mobile plans offering and trying to attract more smartphone customers who are not interested to lock in with expensive contracts. Today AT&T announced a new prepaid plan for smartphone customers which offers 1 GB of , unlimited calls and text for $65 a month. Compared to existing plans that offers same , the new plan saves $10 per month and rates are comparable to T-Mobile prepaid service. The new plan will be available to all prepaid customers from October 7, 2012. I’m using AT&T prepaid plan for the past 3 months and paying $75 for 1 GB data, unlimited calls. Few days ago I did some analysis on prepaid plans offered by various network providers and found T-Mobile has cheapest plans that suits my needs – $60 for 2 GB data,  unlimited calls and texts. Even though T Mobile’s network coverage is not as great as AT&T in the area where I live, I planned to switch to save $15 per month. After reading today’s announcement, I don’t think that I’ll switch to T Mobile for saving $5 + 1 GB of extra data.  Thanks AT&T for the new plan, I’ll stay with you for now. via engadget

  Read the article

• Easy solution to monitoring & blocking connections to non-malicious services, IP's, and tracking companies

  - by binarybunny

  Our family lives in the middle of nowhere, so the only high-speed internet available is Verizon's 3G mobile broadband. We have the highest package available, yet continually go over the 10GB limit and get charged $10 every 1GB we go over. We run a business from home, so stopping when we hit the limit is not an option. I've found the majority of connections are to Google, Microsoft, Akamai, Facebook, and other web service companies (mainly google). I know these are harmless connections, but when it costs money for them to monitor our web activity it becomes a serious problem. Here's some things I've done, but I'm sure there's something else that could help before blocking a huge set of IP ranges: stopped using windows (on my machine) use MVPS host file on all computers use firefox on all computers (with don't track me option) ad block plugin on all browsers blocking google updates blocking windows updates block images in browsers (when possible) use comodo (paranoia-level style of blocking..) virus-free computers with ESET NOD32 bought router and installed dd-wrt in attempt to block connections more diligently (and throttle bandwidth if it comes to that) Anything I'm missing? I know Google analytics is on almost all websites, as well as FB like buttons but I would like to be able to stop these connections without blocking use of google services like gmail, etc. Any ideas?

  Read the article

• Explaining the difference between OData & RDF by way of analogy

  - by jamiet

  A couple of months back I wrote a blog post entitled Microsoft, OData and RDF where I gave a high level view of the OData protocol and how it compares to RDF. I talked about linked data, triples and such like which may have been somewhat useful however jargon-heavy. Earlier today Dr Michael Hausenblas (blog | twitter) offered an analogy which I think is probably more useful and with Michael's permission I'm re-posting it here:Imagine a Web (a Web of Documents, if you wish), which is not based on HTML and hyperlinks, but on MS Word documents. The documents are all available on the Internet, so you can download them and consume the content. But after you’re done with a certain document that talks about a book, how do you learn more about it? For example, reviews about the book or where you can purchase it? Maybe the original document mentions that there is some more related information on another server. So you’d need to go there and look for the related bit of information yourself. You see? That’s what the Web is great at – you just click on a hyperlink and it takes you to the document (or section) you’re interested in. All the legwork is taken care of for you through HTML, URIs and HTTP.Hm, right, but how is this related to OData? Well, OData feels a bit like the above mentioned scenario, just concerning data. Of course you – well actually rather a software program I guess – can consume it (a single source), but that’s it.from Oh – it is data on the Web by Michael Hausenblas I believe that OData has loads of use cases but its important to understand its limitations as well and I think Michael has done a good job of explaining those limitations.@Jamiet   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• SQL SERVER – 2012 – List All The Column With Specific Data Types in Database

  - by pinaldave

  5 years ago I wrote script SQL SERVER – 2005 – List All The Column With Specific Data Types, when I read it again, it is very much relevant and I liked it. This is one of the script which every developer would like to keep it handy. I have upgraded the script bit more. I have included few additional information which I believe I should have added from the beginning. It is difficult to visualize the final script when we are writing it first time. I use every script which I write on this blog, the matter of the fact, I write only those scripts here which I was using at that time. It is quite possible that as time passes by my needs are changing and I change my script. Here is the updated script of this subject. If there are any user data types, it will list the same as well. SELECT s.name AS 'schema', ts.name AS TableName, c.name AS column_name, c.column_id, SCHEMA_NAME(t.schema_id) AS DatatypeSchema, t.name AS Datatypename ,t.is_user_defined, t.is_assembly_type ,c.is_nullable, c.max_length, c.PRECISION, c.scale FROM sys.columns AS c INNER JOIN sys.types AS t ON c.user_type_id=t.user_type_id INNER JOIN sys.tables ts ON ts.OBJECT_ID = c.OBJECT_ID INNER JOIN sys.schemas s ON s.schema_id = t.schema_id ORDER BY s.name, ts.name, c.column_id I would be very interested to see your script which lists all the columns of the database with data types. If I am missing something in my script, I will modify it based on your comment. This way this page will be a good bookmark for the future for all of us. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL DMV, SQL Query, SQL Server, SQL System Table, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Representation of data in application versus database

  - by user1815201

  I'm going to make an application that will be given data to put in a database. The data will for the most part be the same, but the way it is formatted will vary a lot (could be in anything from text files to .xls to .doc). I'm not a very experienced developer, but I can see some potential issues and I want to minimize them. First off I have decided to use the DAO pattern, so that I can easily support new file formats or file suddenly formatted in different ways. What I really wonder about though, is how I should manage the data itself within my application. I'm thinking that the database DAO should have models representing each table of the database with the same relations between them, to make the uploading process easy. But should the filesystem DAO's have to use the same models? I can imaging that when the database changes, the change will suddenly propagate throughout the entire system, all DAOs and models alike. And that is obviously a bad thing. I'm a little bit tired and out of time. Will update with what ever questions you have. Thanks!

  Read the article

• How should I evaluate the Database Solution for Large Data Application

  - by GµårÐïåñ

  Background I have been tasked to write an application that will be a combination of document and inventory management in VB.net which will be used to store document images in TIFF, PDF, XPS, TXT, DOC, PPT and so on as binary data that can be retrieved for viewing, printing, and possible OCR to be searchable as well along with meta data such as sender, recipient, type of document, date, source, etc. So the table would probably be something like: DOC_NAME, DOC_DATE, NOTES, ... DOC_BINARY (where the actual document will be put inside) Help Please I need help with understanding how to evaluate my database options. What my concern is finding a database solution that will not become unstable due to size restrictions, records limitations and performance. Some of the options are MS_SQL, SQL Express, SQLite, mySQL, and Access. Now I can pretty much eliminate Access right off the bat as it is just too limiting and not scalable. I can further eliminate SQL Express because of the 2 GB limit and again scalability. So I believe that leaves me with MS_SQL, SQLite and mySQL (note, I am open to alternatives). And this is where I need help in understanding how to evaluate those databases. The goal is that the data is all in one place (a single file) that will make backup and portability easier. For small volume usage, pretty much any solution will hold for a while, but my goal is to think ahead and make sure its able to withstand heavy large volume usage as well. Another consideration is also the interoperability with .NET and stability of such code to avoid errors and memory leaks. How should I evaluate my database options for this scenario?

  Read the article

• How to Export Flash Animation Data

  - by charliep

  I'd love for my partner, the artist, to be able to animate using flash movieclips and timelines. Then I, the programmer, would like to read the raw Flash info and re-program it into my engine of choice (which happens to be Torque2D). The data I'd want is the bitmap images that were used in Flash, like the head and body the links between the images, like where the head connects to the body the motion data from the flash animation, like move, rotate (at what speed), shear, etc. for the head or arms or whatever. Is there any way to get this data? Here's what I know so far. There are tools like SWFSheet and Spriteloq that convert the entire flash animation into a frame by frame sprite animation (in a sprite sheet). This would take too much space in my case, so I'd like to avoid that. Re-animating on the fly would take much less texture memory. There is a PDF that describes the SWF file format but NOT the individual components like the movieclips. So anyone know of a library I can use, or how I can learn more about the movieclip components and whatnot? (more better tags: transform, export, convert)

  Read the article

• virtualisation with kvm: export services from guest to the host

  - by ascobol

  Hello, I would like to export some services from the guest os to the host os, via kvm, and by the same way learn some things about networking. I have tried the following commands: In the host (kubuntu 10.4): $ sudo tunctl -u ascobol Set 'tap0' persistent and owned by uid 2401 $ sudo ifconfig tap0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255 The ifconfig command returns: $ /sbin/ifconfig tap0 Link encap:Ethernet HWaddr 3e:4e:e3:cc:bc:92 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::3c4e:e3ff:fecc:bc92/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:17 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Then I run the virtual machine (ubuntu server 10.4): $ sudo kvm -hda ubuntuserver104.qcow2 -net nic -net tap,name=tap0,script=no (I'm using sudo because without it fails with the following message:) warning: could not configure /dev/net/tun: no virtual network emulation With sudo the virtual machine boots, I just get this message: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin" In the virtual machine: $ ifconfig eth0 192.168.2.2 netmask 255.255.255.0 broadcast 192.168.2.255 Now if I run: $ ssh 192.168.2.2 I just get a No route to host What is wrong with this setup ? Thanks !

  Read the article

• GIS-based data visualization and maintenance tool

  - by Dave Jarvis

  Background Looking to leverage an existing GIS system for exploring organizational data. Architecture The following figure represents a high-level overview of the system's desired features: The most basic usage would be as follows: The user visits a web site. The system presents a map (having regions, cities, and buildings). The user drills-down on the map to a particular building. The system provides a basic CRUD interface. The user can view and modify information about personnel (e.g., their assigned teams), equipment (e.g., network appliances), applications, and the building itself (e.g., contact and phone numbers). Ideally, all the components should be open-source (or otherwise free). Problem This must be a small project that needs a quick (but functional) prototype, mostly to confirm whether or not such a system would be useful in the long term. Questions What software components would you use to quickly develop a working prototype? What open-source solutions already exist, if any? Ideas Here is what I am thinking: PostGIS - Define the regions, cities, and sites Google Maps - Display an interactive, clickable map geoJSON - Protocol between PostGIS and Google Maps Seam - CRUD interface Custom Development For example, this would entail: Installation and configuration Configure SSH for remote logins Subversion (or git) PostgreSQL PostGIS Java Tomcat Seam JasperReports Enter GIS information into PostGIS Aggregate data sources into PostgreSQL database Develop starting page for map interface Develop clickable Google Maps interface Develop summary reports Develop CRUD interface using Seam for data maintenance Surely something like this already exists? Thank you!

  Read the article

• Acceptable sound quality: stereo needed for an Android game?

  - by Thomas Calc

  I have various simple short sound effects (damage sound, dying sound, thunderbolt, fanfare, breaking) for a game that is developed for Android currently. I use OGG files: 96kbps VBR, 44.1KHz, 2 channels (that means stereo, right?). I read the other stackexchange topics about "acceptable sound quality", but they're too general, address too many things. My experience is that even with 80kbps, my effects sound OK. But I tested it on a limited number of Android devices (including a Sony Ericsson Xperia Neo and a HTC Desire HD). My questions: For mobile phones and tablets, generally, what parameters are recommended? Won't my 80kbps sounds be bad on a newer device (such as a modern tablet)? I don't hear any difference between stereo and mono (2 channels vs. 1 channel, right?), is there any noticeable difference at all for mobile phones / tablets? (in terms of the player experience) May it worth it at all? I assume that stereo sounds take much more in memory (when they're decoded to PCM), despite of the fact that the compressed OGG size is practically the same. Reacting to Roy T.'s great comment: Actually, I couldn't measure the PCM size (Android decodes OGG internally), but I thought that stereo will take more space than mono when uncompressed After throwing out one of the WAV channels in Audacity, and re-exporting it: The new WAV file size is half than before The OGG file size is practically the same as before The sound effects and game music was recorded by my friend who is an experienced hobby musician/composer, but he knows little about computers & software so he just gave me some high-quality WAV files generated via his hardware.These were stereo, but if I check them in Audacity, both channels appear to be exactly the same.Can I consider them the same (= moving to mono), or might there be some unnoticeable differences to the human eye?

  Read the article

• What are the risks of installing a "bad quality" package?

  - by ændrük

  When I try to install sonic-visualiser_1.9cc-1_amd64.deb via the Software Center the following warning message is displayed: The package is of bad quality The installation of a package which violates the quality standards isn't allowed. This could cause serious problems on your computer. Please contact the person or organisation who provided this package file and include the details beneath. Lintian check results for /home/ak/Downloads/sonic-visualiser_1.9cc-1_amd64.deb: Use of uninitialized value $ENV{"HOME"} in concatenation (.) or string at /usr/bin/lintian line 108. E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/bin/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/bin/sonic-visualiser 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/applications/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/applications/sonic-visualiser.desktop 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/CHANGELOG 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/COPYING 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/doc/sonic-visualiser/README 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/application/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/application/x-sonicvisualiser-layer.desktop 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/mimelnk/application/x-sonicvisualiser.desktop 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/pixmaps/ 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/pixmaps/sv-icon-light.svg 1000/1000 E: sonic-visualiser: wrong-file-owner-uid-or-gid usr/share/pixmaps/sv-icon.svg 1000/1000 I understand that this means the package doesn't meet Debian policy and I know how to override the warning and install the package anyway. What are the risks of doing so?

  Read the article

• SQL SERVER – Fix: Error: 8117: Operand data type bit is invalid for sum operator

  - by pinaldave

  Here is the very interesting error I received from a reader. He has very interesting question. He attempted to use BIT filed in the SUM aggregation function and he got following error. He went ahead with various different datatype (i.e. INT, TINYINT etc) and he was able to do the SUM but with BIT he faced the problem. Error Received: Msg 8117, Level 16, State 1, Line 1 Operand data type bit is invalid for sum operator. Reproduction of the error: Set up the environment USE tempdb GO -- Preparing Sample Data CREATE TABLE TestTable (ID INT, Flag BIT) GO INSERT INTO TestTable (ID, Flag) SELECT 1, 0 UNION ALL SELECT 2, 1 UNION ALL SELECT 3, 0 UNION ALL SELECT 4, 1 GO SELECT * FROM TestTable GO Following script will work fine: -- This will work fine SELECT SUM(ID) FROM TestTable GO However following generate error: -- This will generate error SELECT SUM(Flag) FROM TestTable GO The workaround is to convert or cast the BIT to INT: -- Workaround of error SELECT SUM(CONVERT(INT, Flag)) FROM TestTable GO Clean up the setup -- Clean up DROP TABLE TestTable GO Workaround: As mentioned in above script the workaround is to covert the bit datatype to another friendly data types like INT, TINYINT etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Restoring an Ubuntu Server using ZFS RAID-Z for data

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own Home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and ZFS (OS on 1 Ext4 disk, Data on 3 RAID-Z disks). As Joel Spolsky and Geoff Atwood say with regards to backup, I can't rest until I have done a restore in all of the failure scenarios that I am seeking to protect against. Q: How to configure Ubuntu Server to recognise a pre-existing RAID-Z array? Clearly if one of the data disks die - then that is a resilvering scenario, which is well documented. If two of the data disks die, then I am into regular backup/restore land. If the OS dies and I can restore, also an easy scenario. But if the OS dies and I can't restore, then I need to recreate an Ubuntu server. But how do I get this to recognise my RAID-Z array? Is the necessary configuration information stored within and across the RAID-Z array and simply need to be found (if so, how)? Or does it reside on the OS ext4 disk (in which case how do I recreate it)?

  Read the article

• Setting up PerformancePoint Services on Sharepoint 2010: connection errors

  - by Rik

  I have tried to setup PerformancePoint Services on SharePoint 2010, but every time I try to use the dashboard designer, I get this error: “An error has occurred attempting to contact the specified SharePoint site” I have tried these steps but it hasn't helped. Any ideas? The event log gives the following information: WebHost failed to process a request. Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/24724999 Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item. --- System.ArgumentException: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item) at System.Collections.Generic.SynchronizedCollection`1.Add(T item) at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses) at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) --- End of inner exception stack trace --- at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) Process Name: w3wp Process ID: 2576

  Read the article

• SQL Server Reporting Services - website blank, builder works

  - by Keith

  We have a few reports in SQL Server Reporting Services. For some reason when we run the report from the website, it doesn't return any data. When I run the same report from the Report Builder, it returns data. I looked in the logs and the only errors I could find is: ReportingServicesService!library!8!6/15/2012-08:12:33:: i INFO: Current DB Version Unknown, Instance Version C.0.8.54. ReportingServicesService!library!8!6/15/2012-08:12:33:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.54'. To continue, update the version of the report server database and verify access rights., ;Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.54'. To continue, update the version of the report server database and verify access rights. ReportingServicesService!library!8!6/15/2012-08:12:33:: e ERROR: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.54'. To continue, update the version of the report server database and verify access rights. I'm not really sure why it would be a different version. It's all SQL Server 2008 R2 and I haven't made any changes to it since it's been running.

  Read the article

• Data Movement and the Decision Matrix

  - by BuckWoody

  Maybe it’s my military background, or maybe I’ve always had this predilection, but I like to use two devices when I need to make a complex decision: A checklist and a decision matrix. I like to use a checklist because it ensures that I remember the big bits of what I need to do, and brings up questions or areas that I didn’t think about when evaluating options for the decision. And the decision matrix – that’s the thing I use to actually lay out those options. It’s simply a spreadsheet-like grid (I use Excel, but paper and pencil works as well) that lays out the requirements or advantages for the decision across the top, and the options I have on the left-hand side. Then in the “cells” I put whether or not that option on the left will meet the requirement in that column. I then simply “weight” each cell to organize the choices by best-fit. The right answer (or answers) will float right to the top. I was asked yesterday about options for moving data in SQL Server to another system. There are just dozens of ways to do this, from bcp to Replication, each with certain advantages and costs. But asking the questions for the top row first helped me show the person that it isn’t a particular technology that is important, it’s laying out those requirements and thinking about which elements are more important than the other. For instance, is it more important to have the data moved all the time, or is it OK if that happens once in a while? Does the data have to move in two directions or just one? All of these will help that answer jump right out. Try it sometime – it’s a great learning exercise, since it will force you to focus on filling out the matrix. The answer is out there, Neo. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

  - by George Durzi

  I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

  Read the article

• How to parse JSON data from web more faster [closed]

  - by Kaidul Islam Sazal

  I have json inventory inventory.json on the server like this: [ { "body" : "SUV", "color" : { "ext" : "White diamond pearl", "int" : "Taupe" }, "id" : "276181", "make" : "Acura", "miles" : 35949, "model" : "RDX", "pic" : [ { "full" : "http://images1.dealercp.com/90961/000JNBD/001_0292.jpg" } ], "power" : { "drive" : "Front wheel drive", "eng" : "2.3L DOHC PGM-FI 16-VALVE", "trans" : "Automatic" }, "price" : { "net" : 29488 }, "stock" : "6942", "trim" : "AWD 4dr Tech Pkg SUV", "vin" : "5J8TB2H53BA000334", "year" : 2011 }, { "body" : "Sedan", "color" : { "ext" : "Premium white pearl", "int" : "Taupe" }, "id" : "275622", "make" : "Acura", "miles" : 40923, "model" : "TSX", "pic" : [ { "full" : "http://images1.dealercp.com/90961/000JMC6/001_1765.jpg" } ], "power" : { "drive" : "Front wheel drive", "eng" : "2.4L L4 MPI DOHC 16V", "trans" : "Automatic" }, "price" : { "net" : 22288 }, "stock" : "6945", "trim" : "4dr Sdn I4 Auto Sedan", "vin" : "JH4CU2F66AC011933", "year" : 2010 } ] here are two index, There are almost 5000 index like this. I parsed this json like this: var url = "inventory/inventory.json"; $.getJSON(url, function(data){ $.each(data, function(index, item){ //straight-forward loop if(item.year == 2012) { $('#desc').append(item.make + ' ' + item.model + ' ' + '<br/>' + item.price.net + '<br/>' + item.pic[0].full); } }); }); This is working fine.But the problem is that, this searching and fetching process is little bit slow as there are 5000 indexes already and it's increasing day by day. It seems that, it is a straight-forward loop to parse the data and a normal brute-force method. Now I want to know if there any time efiicient way to parse more faster.Any faster method to parse instead of straight-forward loop ?

  Read the article

• Recovering data from /

  - by Abhijit Gavas

  I accidentally installed Ubuntu to one of my data drives from Windows. The drive was a NTFS drive and contained about 80 GB of important data. The size of the drive is 110 GB. Its new file system is ext4. In an attempt to recover the data, I downloaded foremost and tried the following commands: foremost -i / -o /media/281C8DB01C8D7998/Recovery/ -T -v foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v (sda7 is the drive in question.) It appears that with either command, foremost gets stuck reading some file. Here is the console output: abhi@abi-PC:/dev$ foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Foremost version 1.5.7 by Jesse Kornblum, Kris Kendall, and Nick Mikus Audit File Foremost started at Fri Sep 28 20:58:00 2012 Invocation: foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Output directory: /media/281C8DB01C8D7998/Recovery_Fri_Sep_28_20_58_00_2012 Configuration file: /etc/foremost.conf Processing: stdin |------------------------------------------------------------------ File: stdin Start: Fri Sep 28 20:58:00 2012 Length: Unknown Num Name (bs=512) Size File Offset Comment Killed As you can see I have to kill it from system monitor. This approach does not seem to be working. What else could I try to recover the files? Please help. The files are very important and I will be devastated if I cannot recover them.

  Read the article

• Agile Data Book from O'Reilly Media

  - by Compudicted

  Originally posted on: http://geekswithblogs.net/Compudicted/archive/2013/07/01/153309.aspxAs part of my ongoing self-education and approaching of some free time, yeah, both is a must for every IT person and geek! I have carefully examined the latest trends in the Computersphere with whatever tools I had at my disposal (nothing really fancy was used) and came to a conclusion that for a database pro the *hottest* topic today is undoubtedly the #BigData and all the rapidly growing and spawning ecosystem around it. Having recently immersed myself into the NoSQL world (let me tell here right away NoSQL means Not Only SQL) one book really stood out of the crowd: Book site: http://shop.oreilly.com/product/0636920025054.doDespite being a new book I am sure it will end up on the tables of many Big Data Generalists.In a few dozen words, it is primarily for two reasons:1) The author understands that a  typical business today cannot wait for a Data Scientist for too long to deliver results demanding as usual a very quick turnaround on investments (ROI), and 2) The book covers all the needed and proven modern brick and mortar offerings to get the job done by a relatively newcomer to the Big Data World.It certainly enables such a professional to grow and expand based on the acquired knowledge, and one can truly do it very fast.

  Read the article

• About online game servers and how to handle data

  - by TreantBG

  So my question isn't about what technology to use or how to do this or that, but a more general question. I'm currently developing a action third person shooter. With elements of RPG - weapon,armor upgrades and items. Players will be able to create new games or join old ones. So my question is how to create the game server that players will play in. I have two ideas on my mind. The player who made the game is the server. All data passes trough him and he send this data to the server updating the database of the players with their XP points kills/deaths score and other. Or my host machine is the server, the player who made the game just will open new instance on my host and will be like client. And all players send their input data to the host, the host updates the game and send response back to client for any new changes like where is the enemy and other. And if i choose option 1 is there a chance the host to change the game content and manipulate the game results? (I think there is but i'm not sure) And if i choose option 2 isn't that raising the response time and potentially the game lag? or maybe there is another option?

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >