magic bullet dave - Page 181

Apache config that uses two document roots based on whether the requested resource exists in the first

- by mattalexx

Background I have a client site that consists of a CakePHP installation and a Magento installation: /web/example.com/ /web/example.com/app/ <== CakePHP /web/example.com/app/webroot/ <== DocumentRoot /web/example.com/app/webroot/store/ <== Magento /web/example.com/config/ <== Site-wide config /web/example.com/vendors/ <== Site-wide libraries The server runs Apache 2.2.3. The problem The whole company has FTP access and got used to clogging up the /web/example.com/, /web/example.com/app/webroot/, and /web/example.com/app/webroot/store/ directories with their own files. Sometimes these files need HTTP access and sometimes they don't. In any case, this mess makes my job harder when it comes to maintaining the site. Code merges, tarring the live code, etc, is very complicated and usually requires a bunch of filters. Abandoned solution At first, I thought I would set up a new subdomain on the same server, move all of their files there, and change their FTP chroot. But that wouldn't work for these reasons: Firstly, I have no idea (and neither do they remember) what marketing materials they've sent out that contain URLs to certain resources they've uploaded to the server, using the main domain, and also using abstract subdomains that use the main virtual host because it has ServerAlias *.example.com. So suddenly having them only use static.example.com isn't feasible. Secondly, The PHP scripts in their projects are potentially very non-portable. I want their files to stay in as similar an environment as they were built as I can. Also, I do not want to debug their code to make it portable. Half-baked solution After some thought, I decided to find a way to section off the actual website files into another directory that they would not touch. The company's uploaded files would stay where they were. This would ensure that I didn't break any of their projects that needed HTTP access. It would look something like this: /web/example.com/ <== A bunch of their files are in here /web/example.com/app/webroot/ <== 1st DocumentRoot; A bunch of their files are in here /web/example.com/app/webroot/store/ <== Some more are in here /web/example.com/site/ <== New dir; Contains only site files /web/example.com/site/app/ <== CakePHP /web/example.com/site/app/webroot/ <== 2nd DocumentRoot /web/example.com/site/app/webroot/store/ <== Magento /web/example.com/site/config/ <== Site-wide config /web/example.com/site/vendors/ <== Site-wide libraries After I made this change, I would not need to pay attention to anything except for the stuff within /web/example.com/site/ and my job would be a lot easier. I would be the only one changing stuff in there. So here's where the Apache magic would happen: I need an HTTP request to http://www.example.com/ to first use /web/example.com/app/webroot/ as the document root. If nothing is found (no miscellaneous uploaded company projects are found), try finding something within /web/example.com/site/app/webroot/. Another thing to keep in mind is, the site might have some problems if the $_SERVER['DOCUMENT_ROOT'] variable reads /web/example.com/app/webroot/ but the actual files are within /web/example.com/site/app/webroot/. It would be better if the DOCUMENT_ROOT environment variable could be /web/example.com/site/app/webroot/ for anything within the /web/example.com/site/app/webroot/ directory. Conclusion Is my half-baked solution possible with Apache 2.2.3? Is there a better way to solve this problem?

Read the article

iptables rule(s) to send openvpn traffic from clients over an sshuttle tunnel?

- by Sam Martin

I have an Ubuntu 12.04 box with OpenVPN. The VPN is working as expected -- clients can connect, browse the Web, etc. The OpenVPN server IP is 10.8.0.1 on tun0. On that same box, I can use sshuttle to tunnel into another network to access a Web server on 10.10.0.9. sshuttle does its magic using the following iptables commands: iptables -t nat -N sshuttle-12300 iptables -t nat -F sshuttle-12300 iptables -t nat -I OUTPUT 1 -j sshuttle-12300 iptables -t nat -I PREROUTING 1 -j sshuttle-12300 iptables -t nat -A sshuttle-12300 -j REDIRECT --dest 10.10.0.0/24 -p tcp --to-ports 12300 -m ttl ! --ttl 42 iptables -t nat -A sshuttle-12300 -j RETURN --dest 127.0.0.0/8 -p tcp Is it possible to forward traffic from OpenVPN clients over the sshuttle tunnel to the remote Web server? I'd ultimately like to be able to set up any complicated tunneling on the server, and have relatively "dumb" clients (iPad, etc.) be able to access the remote servers via OpenVPN. Below is a basic diagram of the scenario: [Edit: added output from the OpenVPN box] $ sudo iptables -nL -v -t nat Chain PREROUTING (policy ACCEPT 1498 packets, 252K bytes) pkts bytes target prot opt in out source destination 1512 253K sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 322 packets, 58984 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 584 packets, 43241 bytes) pkts bytes target prot opt in out source destination 587 43421 sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain POSTROUTING (policy ACCEPT 589 packets, 43595 bytes) pkts bytes target prot opt in out source destination 1175 76298 MASQUERADE all -- * eth0 10.8.0.0/24 0.0.0.0/0 Chain sshuttle-12300 (2 references) pkts bytes target prot opt in out source destination 17 1076 REDIRECT tcp -- * * 0.0.0.0/0 10.10.0.0/24 TTL match TTL != 42 redir ports 12300 0 0 RETURN tcp -- * * 0.0.0.0/0 127.0.0.0/8 $ sudo iptables -nL -v -t filter Chain INPUT (policy ACCEPT 97493 packets, 30M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 131K 109M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1370 89160 ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable [Edit 2: more OpenVPN server output] $ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 [Edit 3: still more debug output] IP forwarding appears to be enabled correctly on the OpenVPN server: # find /proc/sys/net/ipv4/conf/ -name forwarding -ls -execdir cat {} \; 18926 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/all/forwarding 1 18954 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/default/forwarding 1 18978 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/eth0/forwarding 1 19003 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/lo/forwarding 1 19028 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/tun0/forwarding 1 Client routing table: $ netstat -r Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 8 48 tun0 default 192.168.1.1 UGSc 2 1652 en1 10.8.0.1/32 10.8.0.5 UGSc 1 0 tun0 10.8.0.5 10.8.0.6 UHr 13 0 tun0 10.10.0/24 10.8.0.5 UGSc 0 0 tun0 <snip> Traceroute from client: $ traceroute 10.10.0.9 traceroute to 10.10.0.9 (10.10.0.9), 64 hops max, 52 byte packets 1 10.8.0.1 (10.8.0.1) 5.403 ms 1.173 ms 1.086 ms 2 192.168.1.1 (192.168.1.1) 4.693 ms 2.110 ms 1.990 ms 3 l100.my-verizon-garbage (client-ext-ip) 7.453 ms 7.089 ms 6.248 ms 4 * * * 5 10.10.0.9 (10.10.0.9) 14.915 ms !N * 6.620 ms !N

Read the article

Reconstructing the disk order in RAID 6 with 7 disks

- by rkotulla

a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

Read the article

Vim: Context sensitive code completion for PHP

- by eddy147

Vim gives me too much options when I use code completion. In a class, and type $class- it gives me about a zillion options, so not only from the class itself but also from php, all globals ever created, in short: a mess. I only want to have the options from the class itself (or the parent subtype class it extends from), so context or scope sensitive code completion, just like Netbeans for example. How can I do that? My current configuration is this: I am using ctags, and created 1 ctags file for our (big) application in the root. This is the .ctags file I used to create the ctags file: -R -h ".php" --exclude=.svn --languages=+PHP,-JavaScript --tag-relative=yes --regex-PHP=/abstract\s+class\s+([^ ]+)/\1/c/ --regex-PHP=/interface\s+([^ ]+)/\1/c/ --regex-PHP=/(public\s+|static\s+|protected\s+|private\s+)\$([^ \t=]+)/\2/p/ --regex-PHP=/const\s+([^ \t=]+)/\1/d/ --regex-PHP=/final\s+(public\s+|static\s+|abstract\s+|protected\s+|private\s+)function\s+\&?\s*([^ (]+)/\2/f/ --PHP-kinds=+cdf --fields=+iaS This is the .vimrc file: " autocomplete funcs and identifiers for languages autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType python set omnifunc=pythoncomplete#Complete autocmd FileType javascript set omnifunc=javascriptcomplete#CompleteJS autocmd FileType html set omnifunc=htmlcomplete#CompleteTags autocmd FileType css set omnifunc=csscomplete#CompleteCSS autocmd FileType xml set omnifunc=xmlcomplete#CompleteTags autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType c set omnifunc=ccomplete#Complete " exuberant ctags " the magic is the ';' at end. it will make vim tags file search go up from current directory until it finds one. set tags=projectrootdir/tags; map <F8> :!ctags " TagList " :tag getUser => Jump to getUser method " :tn (or tnext) => go to next search result " :tp (or tprev) => to to previous search result " :ts (or tselect) => List the current tags " => Go back to last tag location " +Left click => Go to definition of a method " More info: " http://vimdoc.sourceforge.net/htmldoc/tagsrch.html (official documentation) " http://www.vim.org/tips/tip.php?tip_id=94 (a vim tip) let Tlist_Ctags_Cmd = "~/bin/ctags" let Tlist_WinWidth = 50 map <F4> :TlistToggle<cr> "see http://vim.wikia.com/wiki/Make_Vim_completion_popup_menu_work_just_like_in_an_IDE " will change the 'completeopt' option so that Vim's popup menu doesn't select the first completion item, but rather just inserts the longest common text of all matches :set completeopt=longest,menuone " will change the behavior of the <Enter> key when the popup menu is visible. In that case the Enter key will simply select the highlighted menu item, just as <C-Y> does :inoremap <expr> <CR> pumvisible() ? "\<C-y>" : "\<C-g>u\<CR>" " inoremap <expr> <C-n> pumvisible() ? '<C-n>' : \ '<C-n><C-r>=pumvisible() ? "\<lt>Down>" : ""<CR>' inoremap <expr> <M-,> pumvisible() ? '<C-n>' : \ '<C-x><C-o><C-n><C-p><C-r>=pumvisible() ? "\<lt>Down>" : ""<CR>'

Read the article

Network update solutions for a company of ~20 (5 local, 15 remote)?

- by Margaret

Hi all This is probably going to be a bit up in the air, because we're still in the "reaching towards solutions" phase, but I figured I'd see what you guys had to say. Plus I honestly know very little about systems and what is good and bad pratice. My organisation has always more or less worked on the concept of local machines; since it primarily employed contractors who were working from home, each of those people was largely responsible for their own machine and backup procedures and the like. We're now expanding, though we're still reasonably small (we're up to about 20 staff members). Most people still work remotely, but we have a central office where about five people are working. But we're getting large enough that we're starting to think it would be a good idea to have a central file server, and things like that - if someone gets hit by a bus, we want someone else to know where to look for the files to continue their work. A lot of the people who work for us remotely work on projects for other companies as well, so I don't want to force them to log in to our server whenever they're on a network. But I do want to make connection to be as painless as possible to do so, to improve utilisation. The other thing is that we're getting more people who would like to remote into the office server and do their work there. Our current remote connection application is an SSH install that allows people access to the network; the problem is, it's a black box to me, and I've never understood how to even connect to it (despite supposedly being de facto sysadmin). Thus far I've been able to bounce questions about how to get it working to the guy who does know it well, but he's leaving the company soon. So we probably need a solution for this that I actually understand. We were knocking around the idea of implementing a VPN with some form of remote desktop, and someone mentioned that this was largely a matter of purchasing a router capable of it; I'm not sure of the truth of that statement. This is what we have in the office: Two shiny new i7 servers, each running Windows Server 2008. Precise eventual layout is still being debated, a little, but the current suggestion is that one is primary database crunching, while the other is a warm backup of the databases, along with running Reporting Services. They currently have SQL Server 2008 installed on them, which is being connected to via the 'sa' account. We're hoping to make each person use their own account (preferably one tied to the 'central' password we set up, so we can use Windows Authentication). An older server, running XP Pro, that we are currently using as a test bed for a project that requires access to older versions of software. This machine is also being used to take backups, but I'm thinking of moving that functionality elsewhere. A spare desktop from a guy who left the company (XP Pro). We're thinking of bumping up the hard disk space and using it as the magical file server that's going to solve one particular everything. Assorted desktops, laptops, etc, at least one for each person in the office (mix of Win XP and Win 7; occasionally a person who normally works remotely might drop in to the office and bring a laptop bearing Vista, but it's pretty rare). All are set up as local user accounts at the moment; I don't know if it's the best arrangement. Purchasing more hardware is not a big problem, but we figure we might as well make use of what we've got first. Is Active Directory a big magic wand that's going to solve all the world's problems? Is there some other arrangement we should be looking to instead?

Read the article

How do I allow mysqld to use more than 24.9% of my cpu?

- by Joseph Yancey

I have a Web server running on RHEL that is running Apache and MySQL. It has a Quad core 3.2Ghz Xeon CPU and 8 Gigs of RAM Most of the time, we don't have any issues at all. Our web application is very database intensive. When our usage gets pretty heavy MySQL will peg out at using 24.9% of the cpu. Most of the time, it hangs around below 5%. I have speculated that it is only using one core of the CPU and it is pegging out that core but TOP shows me in the cpu column that mysqld changes cores even while the usage stays at 24.9%. When it does this MySQL gets painfully slow as it is queuing up queries Is there some magic configuration that will tell mysql to use more cpu when it needs to? Also, any other advice on my configuration would be helpful. We run two applications on this server. One that runs Innodb but doesn't get much usage (it has been replaced by the other app), and one that runs MyIsam and gets lots of use. Overall, our whole mysql data directory is something like 13Gigs if that matters at all. Here is my config: [root@ProductionLinux root]# cat /etc/my.cnf [mysqld] server-id = 71 log-bin = /var/log/mysql/mysql-bin.log binlog-do-db = oldapplication binlog-do-db = newapplication binlog-do-db = support thread_cache_size = 30 key_buffer_size = 256M table_cache = 256 sort_buffer_size = 4M read_buffer_size = 1M skip-name-resolve innodb_data_home_dir = /usr/local/mysql/data/ innodb_data_file_path = InnoDB:100M:autoextend set-variable = innodb_buffer_pool_size=70M set-variable = innodb_additional_mem_pool_size=10M set-variable = max_connections=500 innodb_log_group_home_dir = /usr/local/mysql/data innodb_log_arch_dir = /usr/local/mysql/data set-variable = innodb_log_file_size=20M set-variable = innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit = 1 log-queries-not-using-indexes log-error = /var/log/mysql/mysql-error.log mysql show variables; +---------------------------------+-----------------------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+-----------------------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 5 | | datadir | /usr/local/mysql/data/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | | ft_max_word_len | 84 | | ft_min_word_len | 4 | | ft_query_expansion_limit | 20 | | ft_stopword_file | (built-in) | | group_concat_max_len | 1024 | | have_archive | YES | | have_bdb | NO | | have_blackhole_engine | NO | | have_compress | YES | | have_crypt | YES | | have_csv | NO | | have_example_engine | NO | | have_federated_engine | NO | | have_geometry | YES | | have_innodb | YES | | have_isam | NO | | have_ndbcluster | NO | | have_openssl | NO | | have_query_cache | YES | | have_raid | NO | | have_rtree_keys | YES | | have_symlink | YES | | init_connect | | | init_file | | | init_slave | | | innodb_additional_mem_pool_size | 10485760 | | innodb_autoextend_increment | 8 | | innodb_buffer_pool_awe_mem_mb | 0 | | innodb_buffer_pool_size | 73400320 | | innodb_checksums | ON | | innodb_commit_concurrency | 0 | | innodb_concurrency_tickets | 500 | | innodb_data_file_path | InnoDB:100M:autoextend | | innodb_data_home_dir | /usr/local/mysql/data/ | | innodb_doublewrite | ON | | innodb_fast_shutdown | 1 | | innodb_file_io_threads | 4 | | innodb_file_per_table | OFF | | innodb_flush_log_at_trx_commit | 1 | | innodb_flush_method | | | innodb_force_recovery | 0 | | innodb_lock_wait_timeout | 50 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_arch_dir | /usr/local/mysql/data | | innodb_log_archive | OFF | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 20971520 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | /usr/local/mysql/data | | innodb_max_dirty_pages_pct | 90 | | innodb_max_purge_lag | 0 | | innodb_mirrored_log_groups | 1 | | innodb_open_files | 300 | | innodb_support_xa | ON | | innodb_sync_spin_loops | 20 | | innodb_table_locks | ON | | innodb_thread_concurrency | 20 | | innodb_thread_sleep_delay | 10000 | | interactive_timeout | 28800 | | join_buffer_size | 131072 | | key_buffer_size | 268435456 | | key_cache_age_threshold | 300 | | key_cache_block_size | 1024 | | key_cache_division_limit | 100 | | language | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/english/ | | large_files_support | ON | | large_page_size | 0 | | large_pages | OFF | | license | GPL | | local_infile | ON | | locked_in_memory | OFF | | log | OFF | | log_bin | ON | | log_bin_trust_function_creators | OFF | | log_error | /var/log/mysql/mysql-error.log | | log_slave_updates | OFF | | log_slow_queries | OFF | | log_warnings | 1 | | long_query_time | 10 | | low_priority_updates | OFF | | lower_case_file_system | OFF | | lower_case_table_names | 0 | | max_allowed_packet | 1048576 | | max_binlog_cache_size | 18446744073709551615 | | max_binlog_size | 1073741824 | | max_connect_errors | 10 | | max_connections | 500 | | max_delayed_threads | 20 | | max_error_count | 64 | | max_heap_table_size | 16777216 | | max_insert_delayed_threads | 20 | | max_join_size | 18446744073709551615 | | max_length_for_sort_data | 1024 | | max_relay_log_size | 0 | | max_seeks_for_key | 18446744073709551615 | | max_sort_length | 1024 | | max_sp_recursion_depth | 0 | | max_tmp_tables | 32 | | max_user_connections | 0 | | max_write_lock_count | 18446744073709551615 | | multi_range_count | 256 | | myisam_data_pointer_size | 6 | | myisam_max_sort_file_size | 9223372036854775807 | | myisam_recover_options | OFF | | myisam_repair_threads | 1 | | myisam_sort_buffer_size | 8388608 | | myisam_stats_method | nulls_unequal | | net_buffer_length | 16384 | | net_read_timeout | 30 | | net_retry_count | 10 | | net_write_timeout | 60 | | new | OFF | | old_passwords | OFF | | open_files_limit | 2510 | | optimizer_prune_level | 1 | | optimizer_search_depth | 62 | | pid_file | /usr/local/mysql/data/ProductionLinux.pid | | port | 3306 | | preload_buffer_size | 32768 | | protocol_version | 10 | | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | | range_alloc_block_size | 2048 | | read_buffer_size | 1044480 | | read_only | OFF | | read_rnd_buffer_size | 262144 | | relay_log_purge | ON | | relay_log_space_limit | 0 | | rpl_recovery_rank | 0 | | secure_auth | OFF | | server_id | 71 | | skip_external_locking | ON | | skip_networking | OFF | | skip_show_database | OFF | | slave_compressed_protocol | OFF | | slave_load_tmpdir | /tmp/ | | slave_net_timeout | 3600 | | slave_skip_errors | OFF | | slave_transaction_retries | 10 | | slow_launch_time | 2 | | socket | /tmp/mysql.sock | | sort_buffer_size | 4194296 | | sql_mode | | | sql_notes | ON | | sql_warnings | ON | | storage_engine | MyISAM | | sync_binlog | 0 | | sync_frm | ON | | sync_replication | 0 | | sync_replication_slave_id | 0 | | sync_replication_timeout | 10 | | system_time_zone | CST | | table_cache | 256 | | table_lock_wait_timeout | 50 | | table_type | MyISAM | | thread_cache_size | 30 | | thread_stack | 262144 | | time_format | %H:%i:%s | | time_zone | SYSTEM | | timed_mutexes | OFF | | tmp_table_size | 33554432 | | tmpdir | | | transaction_alloc_block_size | 8192 | | transaction_prealloc_size | 4096 | | tx_isolation | REPEATABLE-READ | | updatable_views_with_limit | YES | | version | 5.0.18-standard-log | | version_comment | MySQL Community Edition - Standard (GPL) | | version_compile_machine | x86_64 | | version_compile_os | unknown-linux-gnu | | wait_timeout | 28800 | +---------------------------------+-----------------------------------------------------------------------------+ 210 rows in set (0.00 sec)

Read the article

SQL SERVER – Shrinking NDF and MDF Files – Readers’ Opinion

- by pinaldave

Previously, I had written a blog post about SQL SERVER – Shrinking NDF and MDF Files – A Safe Operation. After that, I have written the following blog post that talks about the advantage and disadvantage of Shrinking and why one should not be Shrinking a file SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008. On this subject, SQL Server Expert Imran Mohammed left an excellent comment. I just feel that his comment is worth a big article itself. For everybody to read his wonderful explanation, I am posting this blog post here. Thanks Imran! Shrinking Database always creates performance degradation and increases fragmentation in the database. I suggest that you keep that in mind before you start reading the following comment. If you are going to say Shrinking Database is bad and evil, here I am saying it first and loud. Now, the comment of Imran is written while keeping in mind only the process showing how the Shrinking Database Operation works. Imran has already explained his understanding and requests further explanation. I have removed the Best Practices section from Imran’s comments, as there are a few corrections. Comments from Imran - Before I explain to you the concept of Shrink Database, let us understand the concept of Database Files. When we create a new database inside the SQL Server, it is typical that SQl Server creates two physical files in the Operating System: one with .MDF Extension, and another with .LDF Extension. .MDF is called as Primary Data File. .LDF is called as Transactional Log file. If you add one or more data files to a database, the physical file that will be created in the Operating System will have an extension of .NDF, which is called as Secondary Data File; whereas, when you add one or more log files to a database, the physical file that will be created in the Operating System will have the same extension as .LDF. The questions now are, “Why does a new data file have a different extension (.NDF)?”, “Why is it called as a secondary data file?” and, “Why is .MDF file called as a primary data file?” Answers: Note: The following explanation is based on my limited knowledge of SQL Server, so experts please do comment. A data file with a .MDF extension is called a Primary Data File, and the reason behind it is that it contains Database Catalogs. Catalogs mean Meta Data. Meta Data is “Data about Data”. An example for Meta Data includes system objects that store information about other objects, except the data stored by the users. sysobjects stores information about all objects in that database. sysindexes stores information about all indexes and rows of every table in that database. syscolumns stores information about all columns that each table has in that database. sysusers stores how many users that database has. Although Meta Data stores information about other objects, it is not the transactional data that a user enters; rather, it’s a system data about the data. Because Primary Data File (.MDF) contains important information about the database, it is treated as a special file. It is given the name Primary Data file because it contains the Database Catalogs. This file is present in the Primary File Group. You can always create additional objects (Tables, indexes etc.) in the Primary data file (This file is present in the Primary File group), by mentioning that you want to create this object under the Primary File Group. Any additional data file that you add to the database will have only transactional data but no Meta Data, so that’s why it is called as the Secondary Data File. It is given the extension name .NDF so that the user can easily identify whether a specific data file is a Primary Data File or a Secondary Data File(s). There are many advantages of storing data in different files that are under different file groups. You can put your read only in the tables in one file (file group) and read-write tables in another file (file group) and take a backup of only the file group that has read the write data, so that you can avoid taking the backup of a read-only data that cannot be altered. Creating additional files in different physical hard disks also improves I/O performance. A real-time scenario where we use Files could be this one: Let’s say you have created a database called MYDB in the D-Drive which has a 50 GB space. You also have 1 Database File (.MDF) and 1 Log File on D-Drive and suppose that all of that 50 GB space has been used up and you do not have any free space left but you still want to add an additional space to the database. One easy option would be to add one more physical hard disk to the server, add new data file to MYDB database and create this new data file in a new hard disk then move some of the objects from one file to another, and put the file group under which you added new file as default File group, so that any new object that is created gets into the new files, unless specified. Now that we got a basic idea of what data files are, what type of data they store and why they are named the way they are, let’s move on to the next topic, Shrinking. First of all, I disagree with the Microsoft terminology for naming this feature as “Shrinking”. Shrinking, in regular terms, means to reduce the size of a file by means of compressing it. BUT in SQL Server, Shrinking DOES NOT mean compressing. Shrinking in SQL Server means to remove an empty space from database files and release the empty space either to the Operating System or to SQL Server. Let’s examine this through an example. Let’s say you have a database “MYDB” with a size of 50 GB that has a free space of about 20 GB, which means 30GB in the database is filled with data and the 20 GB of space is free in the database because it is not currently utilized by the SQL Server (Database); it is reserved and not yet in use. If you choose to shrink the database and to release an empty space to Operating System, and MIND YOU, you can only shrink the database size to 30 GB (in our example). You cannot shrink the database to a size less than what is filled with data. So, if you have a database that is full and has no empty space in the data file and log file (you don’t have an extra disk space to set Auto growth option ON), YOU CANNOT issue the SHRINK Database/File command, because of two reasons: There is no empty space to be released because the Shrink command does not compress the database; it only removes the empty space from the database files and there is no empty space. Remember, the Shrink command is a logged operation. When we perform the Shrink operation, this information is logged in the log file. If there is no empty space in the log file, SQL Server cannot write to the log file and you cannot shrink a database. Now answering your questions: (1) Q: What are the USEDPAGES & ESTIMATEDPAGES that appear on the Results Pane after using the DBCC SHRINKDATABASE (NorthWind, 10) ? A: According to Books Online (For SQL Server 2000): UsedPages: the number of 8-KB pages currently used by the file. EstimatedPages: the number of 8-KB pages that SQL Server estimates the file could be shrunk down to. Important Note: Before asking any question, make sure you go through Books Online or search on the Google once. The reasons for doing so have many advantages: 1. If someone else already has had this question before, chances that it is already answered are more than 50 %. 2. This reduces your waiting time for the answer. (2) Q: What is the difference between Shrinking the Database using DBCC command like the one above & shrinking it from the Enterprise Manager Console by Right-Clicking the database, going to TASKS & then selecting SHRINK Option, on a SQL Server 2000 environment? A: As far as my knowledge goes, there is no difference, both will work the same way, one advantage of using this command from query analyzer is, your console won’t be freezed. You can do perform your regular activities using Enterprise Manager. (3) Q: What is this .NDF file that is discussed above? I have never heard of it. What is it used for? Is it used by end-users, DBAs or the SERVER/SYSTEM itself? A: .NDF File is a secondary data file. You never heard of it because when database is created, SQL Server creates database by default with only 1 data file (.MDF) and 1 log file (.LDF) or however your model database has been setup, because a model database is a template used every time you create a new database using the CREATE DATABASE Command. Unless you have added an extra data file, you will not see it. This file is used by the SQL Server to store data which are saved by the users. Hope this information helps. I would like to as the experts to please comment if what I understand is not what the Microsoft guys meant. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Readers Contribution, Readers Question, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Consume WCF Service InProcess using Agatha and WCF

- by REA_ANDREW

I have been looking into this lately for a specific reason. Some integration tests I want to write I want to control the types of instances which are used inside the service layer but I want that control from the test class instance. One of the problems with just referencing the service is that a lot of the time this will by default be done inside a different process. I am using StructureMap as my DI of choice and one of the tools which I am using inline with RhinoMocks is StructureMap.AutoMocking. With StructureMap the main entry point is the ObjectFactory. This will be process specific so if I decide that the I want a certain instance of a type to be used inside the ServiceLayer I cannot configure the ObjectFactory from my test class as that will only apply to the process which it belongs to. This is were I started thinking about two things: Running a WCF in process Being able to share mocked instances across processes A colleague in work pointed me to a project which is for the latter but I thought that it would be a better solution if I could run the WCF Service in process. One of the projects which I use when I think about WCF Services is AGATHA, and the one which I have to used to try and get my head around doing this. Another asset I have is a book called Programming WCF Services by Juval Lowy and if you have not heard of it or read it I would definately recommend it. One of the many topics that is inside this book is the type of configuration you need to communicate with a service in the same process, and it turns out to be quite simple from a config point of view. <system.serviceModel> <services> <service name="Agatha.ServiceLayer.WCF.WcfRequestProcessor"> <endpoint address ="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </service> </services> <client> <endpoint name="MyEndpoint" address="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </client> </system.serviceModel> You can see here that I am referencing the Agatha object and contract here, but also that my binding and the address is something called Named Pipes. THis is sort of the “Magic” which makes it happen in the same process. Next I need to open the service prior to calling the methods on a proxy which I also need. My initial attempt at the proxy did not use any Agatha specific coding and one of the pains I found was that you obviously need to give your proxy the known types which the serializer can be aware of. So we need to add to the known types of the proxy programmatically. I came across the following blog post which showed me how easy it was http://bloggingabout.net/blogs/vagif/archive/2009/05/18/how-to-programmatically-define-known-types-in-wcf.aspx. First Pass So with this in mind, and inside a console app this was my first pass at consuming a service in process. First here is the proxy which I made making use of the Agatha IWcfRequestProcessor contract. public class InProcProxy : ClientBase<Agatha.Common.WCF.IWcfRequestProcessor>, Agatha.Common.WCF.IWcfRequestProcessor { public InProcProxy() { } public InProcProxy(string configurationName) : base(configurationName) { } public Agatha.Common.Response[] Process(params Agatha.Common.Request[] requests) { return Channel.Process(requests); } public void ProcessOneWayRequests(params Agatha.Common.OneWayRequest[] requests) { Channel.ProcessOneWayRequests(requests); } } So with the proxy in place I could then use this after opening the service so here is the code which I use inside the console app make the request. static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new InProcProxy()) { foreach (var operation in proxy.Endpoint.Contract.Operations) { foreach (var t in KnownTypeProvider.GetKnownTypes(null)) { operation.KnownTypes.Add(t); } } var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } So what I used here is the KnownTypeProvider of Agatha to easily get all the types I need for the service/proxy and add them to the proxy. My Request handler for this was just a test one which always returned 2 products. public class GetProductsHandler : RequestHandler<GetProductsRequest,GetProductsResponse> { public override Agatha.Common.Response Handle(GetProductsRequest request) { return new GetProductsResponse { Products = new List<ProductDto> { new ProductDto{}, new ProductDto{} } }; } } Second Pass Now after I did this I started reading up some more on some resources including more by Davy Brion and others on Agatha. Now it turns out that the work I did above to create a derived class of the ClientBase implementing Agatha.Common.WCF.IWcfRequestProcessor was not necessary due to a nice class which is present inside the Agatha code base, RequestProcessorProxy which takes care of this for you! :-) So disregarding that class I made for the proxy and changing my code to use it I am now left with the following: static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new RequestProcessorProxy()) { var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } Cheers for now, Andy References Agatha WCF InProcess Without WCF StructureMap.AutoMocking Cross Process Mocking Agatha Programming WCF Services by Juval Lowy

Read the article

ASP.NET MVC 2 Mdel encapsulated within ViewModel Validation

- by Program.X

I am trying to get validation to work in ASP.NET MVC 2, but without much success. I have a complex class containing a large number of fields. (Don't ask - this is oneo f those real-world situations best practices can't touch) This would normally be my Model and is a LINQ-to-SQL generated class. Because this is generated code, I have created a MetaData class as per http://davidhayden.com/blog/dave/archive/2009/08/10/AspNetMvc20BuddyClassesMetadataType.aspx. public class ConsultantRegistrationMetadata { [DisplayName("Title")] [Required(ErrorMessage = "Title is required")] [StringLength(10, ErrorMessage = "Title cannot contain more than 10 characters")] string Title { get; set; } [Required(ErrorMessage = "Forename(s) is required")] [StringLength(128, ErrorMessage = "Forename(s) cannot contain more than 128 characters")] [DisplayName("Forename(s)")] string Forenames { get; set; } // ... I've attached this to the partial class of my generated class: [MetadataType(typeof(ConsultantRegistrationMetadata))] public partial class ConsultantRegistration { // ... Because my form is complex, it has a number of dependencies, such as SelectLists, etc. which I have encapsulated in a ViewModel pattern - and included the ConsultantRegistration model as a property: public class ConsultantRegistrationFormViewModel { public Data.ConsultantRegistration ConsultantRegistration { get; private set; } public SelectList Titles { get; private set; } public SelectList Countries { get; private set; } // ... So it is essentially ViewModel=Model My View then has: <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Title) %> <%: Html.DropDownListFor(model => model.ConsultantRegistration.Title, Model.Titles,"(select a Title)") %> <%: Html.ValidationMessage("Title","*") %> </p> <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.TextBoxFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.ValidationMessageFor(model=>model.ConsultantRegistration.Forenames) %> </p> The problem is, the validation attributes on the metadata class are having no effect. I tried doing it via an Interface, but also no effect. I'm beginning to think that the reason is because I am encapsulating my model within a ViewModel. My Controller (Create Action) is as follows: [HttpPost] public ActionResult Create(Data.ConsultantRegistration consultantRegistration) { if (ModelState.IsValid) // this is always true - which is wrong!! { try { consultantRegistration = ConsultantRegistrationRepository.SaveConsultantRegistration(consultantRegistration); return RedirectToAction("Edit", new { id = consultantRegistration.ID, sectionIndex = 2 }); } catch (Exception ex) { ModelState.AddModelError("CreateException",ex); } } return View(new ConsultantRegistrationFormViewModel(consultantRegistration)); } As outlined in the comment, the ModelState.IsValid property always returns true, despite fields with the Validaiton annotations not being valid. (Forenames being a key example). Am I missing something obvious - considering I am an MVC newbie? I'm after the mechanism demoed by Jon Galloway at http://www.asp.net/learn/mvc-videos/video-10082.aspx. (Am aware t is similar to http://stackoverflow.com/questions/1260562/asp-net-mvc-model-viewmodel-validation but that post seems to talk about xVal. I have no idea what that is and suspect it is for MVC 1)

Read the article

How Mary Meeker’s Latest Findings May Make You Re-Imagine Commerce

- by Brenna Johnson-Oracle

0 0 1 954 5439 Endeca Technologies 45 12 6381 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Today, Mary Meeker released her highly anticipated annual “Internet Trends” presentation for 2014. All 164 slides are jam-packed with pretty much everything you need to know about the state of the Internet. And as luck would have it, Oracle is staying ahead of these trends (but we’ll talk about that later). There were a few surprises, some stats to solidify what you likely already know, and Meeker’s novel observations about where we are all going. What interested me the most is not only how people are engaging in their personal lives, but how they engage with brands. As you could probably predict, Internet usage growth is slowing while tablet user and mobile data traffic growth continue their meteoric rise around the globe, with tremendous growth in underpenetrated markets like China, India, Brazil and Indonesia. Now hold those the “Internet is dead” comments. Keep in mind there’s still plenty of room to grow, and a multiscreen model is Meeker’s vision for our future. Despite 1.5x YOY growth for mobile traffic, mobile still only makes up about 23% of all traffic today. With tablet shipments easily outpacing figures for PCs even at their height (in 2007), mobile will only continue on it’s path, but won’t be everything to everyone. Mobile won’t replace every touchpoint, it’s just created our shorter attention spans and demand for simpler, more personal experiences. As Meeker points out TVs, tablets, PCs, and smartphones are used for different activities at present, but lines will blur (for example, 84% of smartphones owners use their device while watching TV). Day-to-day activities are being re-imagining through simple, beautiful user experiences. It seems like every day I discover a new way a brand/site/app made the most mundane or mounting task enjoyable and frictionless – and I’m not alone. Meeker points out the evolution of how we do everything from how we communicate, get information, use money, meet someone, get places, order a meal, and consume media is all done through new user interfaces that make day-to-day tasks simpler. This movement has caused just about everyone’s patience for a poor UX to take a nosedive. And it’s not just the digital user experience, technology is making a lot of people’s offline lives easier, and less expensive. Today 47% of online shopping utilizes free shipping— nearly half. And Meeker predicts same day local delivery will be the “next big thing” (and you can take a guess on who will own that). Content, Community and Commerce creates the “Internet Trifecta.” Meeker pointed out that when content, communities and commerce occur in a single experience it’s embraced by consumers, which translates to big dollars for brands. The magic happens when consumers can get inspired, research, and buy in a single experience. As the buying cycle has changed and touchpoints (Web, mobile, social, store) are no longer tied to “roles” or steps in the customer journey, brands must make all experiences (content and commerce) available in a single, adaptable experience. (We at Oracle Commerce have a lot to say on this topic – stay tuned!) And in what Meeker calls the “biggest re-imagination of all:” consumers enabled with smartphones and sensors are creating troves of findable and sharable data, which she says is in the early stages, by growing rapidly. She notes that transparency and patterns of consumers with this hardware (FYI - there are up to 10 sensors embedded in smartphones now) has created a Big Data treasure chest to be mined to improve business and the life of the consumer. The opportunities are endless. So what does it all mean for a company doing business online? Start thinking about how you can: Re-imagine your experience. Not your online experience and your mobile experience and your social experience – your overall experience. When consumers can research, buy, and advocate from anywhere (and their attention spans are at an all-time low) channels don’t exist. Enable simple and beautiful interactions informed by all of the online and offline data you leverage across your enterprise. Ethically leverage the endless supply of data (user generated content, clicks, purchases, in-store behavior, social activity) to make experiences more beautiful, more accurate, and more personalized (not to mention, more lucrative for you). Re-imagine content and commerce. Content and commerce must co-exist in a single destination where shoppers can get inspired, explore, research, share, and purchase in a collective experience. Think of how you can deliver an experience where all types of experiences (brand stories and commerce) adapt to every customer need. (Look for more on this topic coming soon). Re-imagine your reach. Look to Meeker’s findings to see how the global appetite for digital experiences is growing, but under-served in many places (i.e.: India, Mexico, Indonesia, Brazil, Philippines, etc.). Growing your online business to a new geography doesn’t have to mean starting from scratch or having an entirely new team manage the new endeavor. Expand using what you’ve already built in a multisite framework, with global language support. And of course, make sure it’s optimized for mobile! Re-imagine the possible. After every Meeker report, I’m always left with the thought “we are just at the beginning.” Everyday there is more data, more possibilities, more online consumers, and more opportunities to use new latest technology to get closer to your customers and be more successful. There’s a lot going on in our Product Development and Product Innovations groups to automate innovation for our customers, so that they can continue to stay ahead of these trends, without disrupting their business. Check out a recent interview with our Innovations Team on some of these new possibilities. Staying on track despite the seemingly endless possibilities out there is the hard part. Prioritizing where you will focus based on your unique brand promise, customer and goals is what you do best. To learn how Oracle Commerce can help your business achieve your goals check out oracle.com/commerce. Check out Meeker’s entire report here.

Read the article

Solaris 11 Launch Blog Carnival Roundup

- by constant

Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

Read the article

Replacing jQuery.live() with jQuery.on()

- by Rick Strahl

jQuery 1.9 and 1.10 have introduced a host of changes, but for the most part these changes are mostly transparent to existing application usage of jQuery. After spending some time last week with a few of my projects and going through them with a specific eye for jQuery failures I found that for the most part there wasn't a big issue. The vast majority of code continues to run just fine with either 1.9 or 1.10 (which are supposed to be in sync but with 1.10 removing support for legacy Internet Explorer pre-9.0 versions). However, one particular change in the new versions has caused me quite a bit of update trouble, is the removal of the jQuery.live() function. This is my own fault I suppose - .live() has been deprecated for a while, but with 1.9 and later it was finally removed altogether from jQuery. In the past I had quite a bit of jQuery code that used .live() and it's one of the things that's holding back my upgrade process, although I'm slowly cleaning up my code and switching to the .on() function as the replacement. jQuery.live() jQuery.live() was introduced a long time ago to simplify handling events on matched elements that exist currently on the document and those that are are added in the future and also match the selector. jQuery uses event bubbling, special event binding, plus some magic using meta data attached to a parent level element to check and see if the original target event element matches the selected selected elements (for more info see Elijah Manor's comment below). An Example Assume a list of items like the following in HTML for example and further assume that the items in this list can be appended to at a later point. In this app there's a smallish initial list that loads to start, and as the user scrolls towards the end of the initial small list more items are loaded dynamically and added to the list.<div id="PostItemContainer" class="scrollbox"> <div class="postitem" data-id="4z6qhomm"> <div class="post-icon"></div> <div class="postitemheader"><a href="show/4z6qhomm" target="Content">1999 Buick Century For Sale!</a></div> <div class="postitemprice rightalign">$ 3,500 O.B.O.</div> <div class="smalltext leftalign">Jun. 07 @ 1:06am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> <div class="postitem" data-id="2jtvuu17"> <div class="postitemheader"><a href="show/2jtvuu17" target="Content">Toyota VAN 1987</a></div> <div class="postitemprice rightalign">$950</div> <div class="smalltext leftalign">Jun. 07 @ 12:29am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> … </div> With the jQuery.live() function you could easily select elements and hook up a click handler like this:$(".postitem").live("click", function() {...}); Simple and perfectly readable. The behavior of the .live handler generally was the same as the corresponding simple event handlers like .click(), except that you have to explicitly name the event instead of using one of the methods. Re-writing with jQuery.on() With .live() removed in 1.9 and later we have to re-write .live() code above with an alternative. The jQuery documentation points you at the .on() or .delegate() functions to update your code. jQuery.on() is a more generic event handler function, and it's what jQuery uses internally to map the high level event functions like .click(),.change() etc. that jQuery exposes. Using jQuery.on() however is not a one to one replacement of the .live() function. While .on() can handle events directly and use the same syntax as .live() did, you'll find if you simply switch out .live() with .on() that events on not-yet existing elements will not fire. IOW, the key feature of .live() is not working. You can use .on() to get the desired effect however, but you have to change the syntax to explicitly handle the event you're interested in on the container and then provide a filter selector to specify which elements you are actually interested in for handling the event for. Sounds more complicated than it is and it's easier to see with an example. For the list above hooking .postitem clicks, using jQuery.on() looks like this:$("#PostItemContainer").on("click", ".postitem", function() {...}); You specify a container that can handle the .click event and then provide a filter selector to find the child elements that trigger the the actual event. So here #PostItemContainer contains many .postitems, whose click events I want to handle. Any container will do including document, but I tend to use the container closest to the elements I actually want to handle the events on to minimize the event bubbling that occurs to capture the event. With this code I get the same behavior as with .live() and now as new .postitem elements are added the click events are always available. Sweet. Here's the full event signature for the .on() function: .on( events [, selector ] [, data ], handler(eventObject) ) Note that the selector is optional - if you omit it you essentially create a simple event handler that handles the event directly on the selected object. The filter/child selector required if you want life-like - uh, .live() like behavior to happen. While it's a bit more verbose than what .live() did, .on() provides the same functionality by being more explicit on what your parent container for trapping events is. .on() is good Practice even for ordinary static Element Lists As a side note, it's a good practice to use jQuery.on() or jQuery.delegate() for events in most cases anyway, using this 'container event trapping' syntax. That's because rather than requiring lots of event handlers on each of the child elements (.postitem in the sample above), there's just one event handler on the container, and only when clicked does jQuery drill down to find the matching filter element and tries to match it to the originating element. In the early days of jQuery I used manually build handlers that did this and manually drilled from the event object into the originalTarget to determine if it's a matching element. With later versions of jQuery the various event functions in jQuery essentially provide this functionality out of the box with functions like .on() and .delegate(). All of this is nothing new, but I thought I'd write this up because I have on a few occasions forgotten what exactly was needed to replace the many .live() function calls that litter my code - especially older code. This will be a nice reminder next time I have a memory blank on this topic. And maybe along the way I've helped one or two of you as well to clean up your .live() code…© Rick Strahl, West Wind Technologies, 2005-2013Posted in jQuery Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Scott Guthrie in Glasgow

- by Martin Hinshelwood

Last week Scott Guthrie was in Glasgow for his new Guathon tour, which was a roaring success. Scott did talks on the new features in Visual Studio 2010, Silverlight 4, ASP.NET MVC 2 and Windows Phone 7. Scott talked from 10am till 4pm, so this can only contain what I remember and I am sure lots of things he discussed just went in one ear and out another, however I have tried to capture at least all of my Ohh’s and Ahh’s. Visual Studio 2010 Right now you can download and install Visual Studio 2010 Candidate Release, but soon we will have the final product in our hands. With it there are some amazing improvements, and not just in the IDE. New versions of VB and C# come out of the box as well as Silverlight 4 and SharePoint 2010 integration. The new Intellisense features allow inline support for Types and Dictionaries as well as being able to type just part of a name and have the list filter accordingly. Even better, and my personal favourite is one that Scott did not mention, and that is that it is not case sensitive so I can actually find things in C# with its reasonless case sensitivity (Scott, can we please have an option to turn that off.) Another nice feature is the Routing engine that was created for ASP.NET MVC is now available for WebForms which is good news for all those that just imported the MVC DLL’s to get at it anyway. Another fantastic feature that will need some exploring is the ability to add validation rules to your entities and have them validated automatically on the front end. This removes the need to add your own validators and means that you can control an objects validation rules from a single location, the object. A simple command “GridView.EnableDynamicData(gettype(product))“ will enable this feature on controls. What was not clear was wither there would be support for this in WPF and WinForms as well. If there is, we can write our validation rules once and use everywhere. I was disappointed to here that there would be no inbuilt support for the Dynamic Language Runtime (DLR) with VS2010, but I think it will be there for .vNext. Because I have been concentrating on the Visual Studio ALM enhancements to VS2010 I found this section invaluable as I now know at least some of what I missed. Silverlight 4 I am not a big fan of Silverlight. There I said it, and I will probably get lynched for it. My big problem with Silverlight is that most of the really useful things I leaned from WPF do not work. I am only going to mention one thing and that is “x:Type”. If you are a WPF developer you will know how much power these 6 little letters provide; the ability to target templates at object types being the the most magical and useful. But, and this is a massive but, if you are developing applications that MUST run on platforms other than windows then Silverlight is your only choice (well that and Flash, but lets just not go there). And Silverlight has a huge install base as well.. 60% of all internet connected devices have Silverlight. Can Adobe say that? Even though I am not a fan of it my current project is a Silverlight one. If you start your XAML experience with Silverlight you will not be disappointed and neither will the users of the applications you build. Scott showed us a fantastic application called “Silverface” that is a Silverlight 4 Out of Browser application. I have looked for a link and can’t find one, but true to form, here is a fantastic WPF version called Fish Bowl from Microsoft. ASP.NET MVC 2 ASP.NET MVC is something I have played with but never used in anger. It is definitely the way forward, but WebForms is not dead yet. there are still circumstances when WebForms are better. If you are starting from greenfield and you are using TDD, then MVC is ultimately the only way you can go. New in version 2 are Dynamic Scaffolding helpers that let you control how data is presented in the UI from the Entities. Adding validation rules and other options that make sense there can help improve the overall ease of developing the UI. Also the Microsoft team have heard the cries of help from the larger site builders and provided “Areas” which allow a level of categorisation to your Controllers and Views. These work just like add-ins and have their own folder, but also have sub Controllers and Views. Areas are totally pluggable and can be dropped onto existing sites giving the ability to have boxed products in MVC, although what you do with all of those views is anyone's guess. They have been listening to everyone again with the new option to encapsulate UI using the Html.Action or Html.ActionRender. This uses the existing .ascx functionality in ASP.NET to render partial views to the screen in certain areas. While this was possible before, it makes the method official thereby opening it up to the masses and making it a standard. At the end of the session Scott pulled out some IIS goodies including the IIS SEO Toolkit which can be used to verify your own site is “good” for search engine consumption. Better yet he suggested that you run it against your friends sites and shame them with how bad they are. note: make sure you have fixed yours first. Windows Phone 7 Series I had already seen the new UI for WP7 and heard about the developer story, but Scott brought that home by building a twitter application in about 20 minutes using the emulator. Scott’s only mistake was loading @plip’s tweets into the app… And guess what, it was written in Silverlight. When Windows Phone 7 launches you will be able to use about 90% of the codebase of your existing Silverlight application and use it on the phone! There are two downsides to the new WP7 architecture: No, your existing application WILL NOT work without being converted to either a Silverlight or XNA UI. NO, you will not be able to get your applications onto the phone any other way but through the Marketplace. Do I think these are problems? No, not even slightly. This phone is aimed at consumers who have probably never tried to install an application directly onto a device. There will be support for enterprise apps in the future, but for now enterprises should stay on Windows Phone 6.5.x devices. Post Event drinks At the after event drinks gathering Scott was checking out my HTC HD2 (released to the US this month on T-Mobile) and liked the Windows Phone 6.5.5 build I have on it. We discussed why Microsoft were not going to allow Windows Phone 7 Series onto it with my understanding being that it had 5 buttons and not 3, while Scott was sure that there was more to it from a hardware standpoint. I think he is right, and although the HTC HD2 has a DX9 compatible processor, it was never built with WP7 in mind. However, as if by magic Saturday brought fantastic news for all those that have already bought an HD2: Yes, this appears to be Windows Phone 7 running on a HTC HD2. The HD2 itself won't be getting an official upgrade to Windows Phone 7 Series, so all eyes are on the ROM chefs at the moment. The rather massive photos have been posted by Tom Codon on HTCPedia and they've apparently got WiFi, GPS, Bluetooth and other bits working. The ROM isn't online yet but according to the post there's a beta version coming soon. Leigh Geary - http://www.coolsmartphone.com/news5648.html What was Scott working on on his flight back to the US? Technorati Tags: VS2010,MVC2,WP7S,WP7 Follow: @CAMURPHY, @ColinMackay, @plip and of course @ScottGu

Read the article

Using Unity – Part 2

- by nmarun

In the first part of this series, we created a simple project and learned how to implement IoC pattern using Unity. In this one, I’ll show how you can instantiate other types that implement our IProduct interface. One place where this one would want to use this feature is to create mock types for testing purposes. Alright, let’s dig in. I added another class – Product2.cs to the ProductModel project. 1: public class Product2 : IProduct 2: { 3: public string Name { get; set;} 4: public Category Category { get; set; } 5: public DateTime MfgDate { get;set; } 6: 7: public Product2() 8: { 9: Name = "Canon Digital Rebel XTi"; 10: Category = new Category {Name = "Electronics", SubCategoryName = "Digital Cameras"}; 11: MfgDate = DateTime.Now; 12: } 13: 14: public string WriteProductDetails() 15: { 16: return string.Format("Name: {0}<br/>Category: {1}<br/>Mfg Date: {2}", 17: Name, Category, MfgDate.ToShortDateString()); 18: } 19: } Highlights of this class are that it implements IProduct interface and it has some different properties than the Product class. The Category class looks like below: 1: public class Category 2: { 3: public string Name { get; set; } 4: public string SubCategoryName { get; set; } 5: 6: public override string ToString() 7: { 8: return string.Format("{0} - {1}", Name, SubCategoryName); 9: } 10: } We’ll go to our web.config file to add the configuration information about this new class – Product2 that we created. Let’s first add a typeAlias element. 1: <typeAlias alias="Product2" type="ProductModel.Product2, ProductModel"/> That’s all that is needed for us to get an instance of Product2 in our application. I have a new button added to the .aspx page and the click event of this button is where all the magic happens: 1: private IUnityContainer unityContainer; 2: protected void Page_Load(object sender, EventArgs e) 3: { 4: unityContainer = Application["UnityContainer"] as IUnityContainer; 5: 6: if (unityContainer == null) 7: { 8: productDetailsLabel.Text = "ERROR: Unity Container not populated in Global.asax.<p />"; 9: } 10: else 11: { 12: if (!IsPostBack) 13: { 14: IProduct productInstance = unityContainer.Resolve<IProduct>(); 15: productDetailsLabel.Text = productInstance.WriteProductDetails(); 16: } 17: } 18: } 19: 20: protected void Product2Button_Click(object sender, EventArgs e) 21: { 22: unityContainer.RegisterType<IProduct, Product2>(); 23: IProduct product2Instance = unityContainer.Resolve<IProduct>(); 24: productDetailsLabel.Text = product2Instance.WriteProductDetails(); 25: } The unityContainer instance is set in the Page_Load event. Line 22 in the click event of the Product2Button registers a type mapping in the container. In English, this means that when unityContainer tries to resolve for IProduct, it gets an instance of Product2. Once this code runs, following output is rendered: There’s another way of doing this. You can resolve an instance of the requested type with a name from the container. We’ll have to update the container element of our web.config file to include the following: 1: <container name="unityContainer"> 2: <types> 3: <type type="IProduct" mapTo="Product"/> 4:  5: <type type="IProduct" mapTo="Product" name="LegacyProduct" /> 6:  7: <type type="IProduct" mapTo="Product2" name="NewProduct" /> 8: </types> 9: </container> I’ve added a Dropdownlist and a button to the design page: 1: <asp:DropDownList ID="ModelTypesList" runat="server"> 2: <asp:ListItem Text="Legacy Product" Value="LegacyProduct" /> 3: <asp:ListItem Text="New Product" Value="NewProduct" /> 4: </asp:DropDownList> 5: <br /> 6: <asp:Button ID="SelectedModelButton" Text="Get Selected Instance" runat="server" 7: onclick="SelectedModelButton_Click" /> 1: protected void SelectedModelButton_Click(object sender, EventArgs e) 2: { 3: // get the selected value: LegacyProduct or NewProduct 4: string modelType = ModelTypesList.SelectedValue; 5: // pass the modelType to the Resolve method 6: IProduct customModel = unityContainer.Resolve<IProduct>(modelType); 7: productDetailsLabel.Text = customModel.WriteProductDetails(); 8: } Pretty straight forward right? The only thing to note here is that the values in the dropdownlist item need to match the name attribute of the type. Depending on what you select, you’ll get an instance of either the Product class or the Product2 class and the corresponding WriteProductDetails() method is called. Now you see, how either of these methods can be used to create mock objects your the test project. See the code here. I’ll continue to share more of Unity in the next blog.

Read the article

ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

- by nmgomes

The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters>  <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections>  <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections>  <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers>  <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute">  <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

Read the article

Multi-tenant ASP.NET MVC - Views

- by zowens

Part I – Introduction Part II – Foundation Part III – Controllers So far we have covered the basic premise of tenants and how they will be delegated. Now comes a big issue with multi-tenancy, the views. In some applications, you will not have to override views for each tenant. However, one of my requirements is to add extra views (and controller actions) along with overriding views from the core structure. This presents a bit of a problem in locating views for each tenant request. I have chosen quite an opinionated approach at the present but will coming back to the “views” issue in a later post. What’s the deal? The path I’ve chosen is to use precompiled Spark views. I really love Spark View Engine and was planning on using it in my project anyways. However, I ran across a really neat aspect of the source when I was having a look under the hood. There’s an easy way to hook in embedded views from your project. There are solutions that provide this, but they implement a special Virtual Path Provider. While I think this is a great solution, I would rather just have Spark take care of the view resolution. The magic actually happens during the compilation of the views into a bin-deployable DLL. After the views are compiled, the are simply pulled out of the views DLL. Each tenant has its own views DLL that just has “.Views” appended after the assembly name as a convention. The list of reasons for this approach are quite long. The primary motivation is performance. I’ve had quite a few performance issues in the past and I would like to increase my application’s performance in any way that I can. My customized build of Spark removes insignificant whitespace from the HTML output so I can some some bandwidth and load time without having to deal with whitespace removal at runtime. How to setup Tenants for the Host In the source, I’ve provided a single tenant as a sample (Sample1). This will serve as a template for subsequent tenants in your application. The first step is to add a “PostBuildStep” installer into the project. I’ve defined one in the source that will eventually change as we focus more on the construction of dependency containers. The next step is to tell the project to run the installer and copy the DLL output to a folder in the host that will pick up as a tenant. Here’s the code that will achieve it (this belongs in Post-build event command line field in the Build Events tab of settings) %systemroot%\Microsoft.NET\Framework\v4.0.30319\installutil "$(TargetPath)" copy /Y "$(TargetDir)$(TargetName)*.dll" "$(SolutionDir)Web\Tenants\" copy /Y "$(TargetDir)$(TargetName)*.pdb" "$(SolutionDir)Web\Tenants\" The DLLs with a name starting with the target assembly name will be copied to the “Tenants” folder in the web project. This means something like MultiTenancy.Tenants.Sample1.dll and MultiTenancy.Tenants.Sample1.Views.dll will both be copied along with the debug symbols. This is probably the simplest way to go about this, but it is a tad inflexible. For example, what if you have dependencies? The preferred method would probably be to use IL Merge to merge your dependencies with your target DLL. This would have to be added in the build events. Another way to achieve that would be to simply bypass Visual Studio events and use MSBuild. I also got a question about how I was setting up the controller factory. Here’s the basics on how I’m setting up tenants inside the host (Global.asax) protected void Application_Start() { RegisterRoutes(RouteTable.Routes); // create a container just to pull in tenants var topContainer = new Container(); topContainer.Configure(config => { config.Scan(scanner => { scanner.AssembliesFromPath(Path.Combine(Server.MapPath("~/"), "Tenants")); scanner.AddAllTypesOf<IApplicationTenant>(); }); }); // create selectors var tenantSelector = new DefaultTenantSelector(topContainer.GetAllInstances<IApplicationTenant>()); var containerSelector = new TenantContainerResolver(tenantSelector); // clear view engines, we don't want anything other than spark ViewEngines.Engines.Clear(); // set view engine ViewEngines.Engines.Add(new TenantViewEngine(tenantSelector)); // set controller factory ControllerBuilder.Current.SetControllerFactory(new ContainerControllerFactory(containerSelector)); } The code to setup the tenants isn’t actually that hard. I’m utilizing assembly scanners in StructureMap as a simple way to pull in DLLs that are not in the AppDomain. Remember that there is a dependency on the host in the tenants and a tenant cannot simply be referenced by a host because of circular dependencies. Tenant View Engine TenantViewEngine is a simple delegator to the tenant’s specified view engine. You might have noticed that a tenant has to define a view engine. public interface IApplicationTenant { .... IViewEngine ViewEngine { get; } } The trick comes in specifying the view engine on the tenant side. Here’s some of the code that will pull views from the DLL. protected virtual IViewEngine DetermineViewEngine() { var factory = new SparkViewFactory(); var file = GetType().Assembly.CodeBase.Without("file:///").Replace(".dll", ".Views.dll").Replace('/', '\\'); var assembly = Assembly.LoadFile(file); factory.Engine.LoadBatchCompilation(assembly); return factory; } This code resides in an abstract Tenant where the fields are setup in the constructor. This method (inside the abstract class) will load the Views assembly and load the compilation into Spark’s “Descriptors” that will be used to determine views. There is some trickery on determining the file location… but it works just fine. Up Next There’s just a few big things left such as StructureMap configuring controllers with a convention instead of specifying types directly with container construction and content resolution. I will also try to find a way to use the Web Forms View Engine in a multi-tenant way we achieved with the Spark View Engine without using a virtual path provider. I will probably not use the Web Forms View Engine personally, but I’m sure some people would prefer using WebForms because of the maturity of the engine. As always, I love to take questions by email or on twitter. Suggestions are always welcome as well! (Oh, and here’s another link to the source code).

Read the article

Creating a multi-column rollover image gallery with HTML 5

- by nikolaosk

I know it has been a while since I blogged about HTML 5. I have two posts in this blog about HTML 5. You can find them here and here.I am creating a small content website (only text,images and a contact form) for a friend of mine.He wanted to create a rollover gallery.The whole concept is that we have some small thumbnails on a page, the user hovers over them and they appear enlarged on a designated container/placeholder on a page. I am trying not to use Javascript scripts when I am using effects on a web page and this is what I will be doing in this post. Well some people will say that HTML 5 is not supported in all browsers. That is true but most of the modern browsers support most of its recommendations. For people who still use IE6 some hacks must be devised.Well to be totally honest I cannot understand why anyone at this day and time is using IE 6.0.That really is beyond me.Well, the point of having a web browser is to be able to ENJOY the great experience that the WE? offers today. Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. In order to be absolutely clear this is not (and could not be ) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.For the people who are not convinced yet that they should invest time and resources on becoming experts on HTML 5 I should point out that HTML 5 websites will be ranked higher than others. Search engines will be able to locate better the content of our site and its relevance/importance since it is using semantic tags. Let's move now to the actual hands-on example. In this case (since I am mad Liverpool supporter) I will create a rollover image gallery of Liverpool F.C legends. I create a folder in my desktop. I name it Liverpool Gallery.Then I create two subfolders in it, large-images (I place the large images in there) and thumbs (I place the small images in there).Then I create an empty .html file called LiverpoolLegends.html and an empty .css file called style.css.Please have a look at the HTML Markup that I typed in my fancy editor package below<!doctype html><html lang="en"><head><title>Liverpool Legends Gallery</title><meta charset="utf-8"><link rel="stylesheet" type="text/css" href="style.css"></head><body><header><h1>A page dedicated to Liverpool Legends</h1><h2>Do hover over the images with the mouse to see the full picture</h2></header><ul id="column1"><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/john-barnes.jpg" alt=""><img class="large" src="large-images/john-barnes-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/ian-rush.jpg" alt=""><img class="large" src="large-images/ian-rush-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/graeme-souness.jpg" alt=""><img class="large" src="large-images/graeme-souness-large.jpg" alt=""></a></li></ul><ul id="column2"><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/steven-gerrard.jpg" alt=""><img class="large" src="large-images/steven-gerrard-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/kenny-dalglish.jpg" alt=""><img class="large" src="large-images/kenny-dalglish-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/robbie-fowler.jpg" alt=""><img class="large" src="large-images/robbie-fowler-large.jpg" alt=""></a></li></ul><ul id="column3"><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/alan-hansen.jpg" alt=""><img class="large" src="large-images/alan-hansen-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/michael-owen.jpg" alt=""><img class="large" src="large-images/michael-owen-large.jpg" alt=""></a></li></ul></body></html> It is very easy to follow the markup. Please have a look at the new doctype and the new semantic tag <header>. I have 3 columns and I place my images in there.There is a class called "large".I will use this class in my CSS code to hide the large image when the mouse is not on (hover) an image Make sure you validate your HTML 5 page in the validator found hereHave a look at the CSS code below that makes it all happen.img { border:none;}#column1 { position: absolute; top: 30; left: 100; }li { margin: 15px; list-style-type:none;}#column1 a img.large { position: absolute; top: 0; left:700px; visibility: hidden;}#column1 a:hover { background: white;}#column1 a:hover img.large { visibility:visible;}#column2 { position: absolute; top: 30; left: 195px; }li { margin: 5px; list-style-type:none;}#column2 a img.large { position: absolute; top: 0; left:510px; margin-left:0; visibility: hidden;}#column2 a:hover { background: white;}#column2 a:hover img.large { visibility:visible;}#column3 { position: absolute; top: 30; left: 400px; width:108px;}li { margin: 5px; list-style-type:none;}#column3 a img.large { width: 260px; height:260px; position: absolute; top: 0; left:315px; margin-left:0; visibility: hidden;}#column3 a:hover { background: white;}#column3 a:hover img.large { visibility:visible;}?n the first line of the CSS code I set the images to have no border.Then I place the first column in the page and then remove the bullets from the list elements.Then I use the large CSS class to create a position for the large image and hide it.Finally when the hover event takes place I make the image visible.I repeat the process for the next two columns. I have tested the page with IE 10 and the latest versions of Opera,Chrome and Firefox.Feel free to style your HTML 5 gallery any way you want through the magic of CSS.I did not bother adding background colors and borders because that was beyond the scope of this post. Hope it helps!!!!

Read the article

Run Your Tests With Any NUnit Version

- by Alois Kraus

I always thought that the NUnit test runners and the test assemblies need to reference the same NUnit.Framework version. I wanted to be able to run my test assemblies with the newest GUI runner (currently 2.5.3). Ok so all I need to do is to reference both NUnit versions the newest one and the official for the current project. There is a nice article form Kent Bogart online how to reference the same assembly multiple times with different versions. The magic works by referencing one NUnit assembly with an alias which does prefix all types inside it. Then I could decorate my tests with the TestFixture and Test attribute from both NUnit versions and everything worked fine except that this was ugly. After playing a little bit around to make it simpler I found that I did not need to reference both NUnit.Framework assemblies. The test runners do not require the TestFixture and Test attribute in their specific version. That is really neat since the test runners are instructed by attributes what to do in a declarative way there is really no need to tie the runners to a specific version. At its core NUnit has this little method hidden to find matching TestFixtures and Tests public bool CanBuildFrom(Type type) { if (!(!type.IsAbstract || type.IsSealed)) { return false; } return (((Reflect.HasAttribute(type, "NUnit.Framework.TestFixtureAttribute", true) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestAttribute" , true)) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestCaseAttribute" , true)) || Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TheoryAttribute" , true)); } That is versioning and backwards compatibility at its best. I tell NUnit what to do by decorating my tests classes with NUnit Attributes and the runner executes my intent without the need to bind me to a specific version. The contract between NUnit versions is actually a bit more complex (think of AssertExceptions) but this is also handled nicely by using not the concrete type but simply to check for the catched exception type by string. What can we learn from this? Versioning can be easy if the contract is small and the users of your library use it in a declarative way (Attributes). Everything beyond it will force you to reference several versions of the same assembly with all its consequences. Type equality is lost between versions so none of your casts will work. That means that you cannot simply use IBigInterface in two versions. You will need a wrapper to call the correct versioned one. To get out of this mess you can use one (and only one) version agnostic driver to encapsulate your business logic from the concrete versions. This is of course more work but as NUnit shows it can be easy. Simplicity is therefore not a nice thing to have but also requirement number one if you intend to make things more complex in version two and want to support any version (older and newer). Any interaction model above easy will not be maintainable. There are different approached to versioning. Below are my own personal observations how versioning works within the .NET Framwork and NUnit. Versioning Models 1. Bug Fixing and New Isolated Features When you only need to fix bugs there is no need to break anything. This is especially true when you have a big API surface. Microsoft did this with the .NET Framework 3.0 which did leave the CLR as is but delivered new assemblies for the features WPF, WCF and Windows Workflow Foundations. Their basic model was that the .NET 2.0 assemblies were declared as red assemblies which must not change (well mostly but each change was carefully reviewed to minimize the risk of breaking changes as much as possible) whereas the new green assemblies of .NET 3,3.5 did not have such obligations since they did implement new unrelated features which did not have any impact on the red assemblies. This is versioning strategy aimed at maximum compatibility and the delivery of new unrelated features. If you have a big API surface you should strive hard to do the same or you will break your customers code with every release. 2. New Breaking Features There are times when really new things need to be added to an existing product. The .NET Framework 4.0 did change the CLR in many ways which caused subtle different behavior although the API´s remained largely unchanged. Sometimes it is possible to simply recompile an application to make it work (e.g. changed method signature void Func() –> bool Func()) but behavioral changes need much more thought and cannot be automated. To minimize the impact .NET 2.0,3.0,3.5 applications will not automatically use the .NET 4.0 runtime when installed but they will keep using the “old” one. What is interesting is that a side by side execution model of both CLR versions (2 and 4) within one process is possible. Key to success was total isolation. You will have 2 GCs, 2 JIT compilers, 2 finalizer threads within one process. The two .NET runtimes cannot talk (except via the usual IPC mechanisms) to each other. Both runtimes share nothing and run independently within the same process. This enables Explorer plugins written for the CLR 2.0 to work even when a CLR 4 plugin is already running inside the Explorer process. The price for isolation is an increased memory footprint because everything is loaded and running two times. 3. New Non Breaking Features It really depends where you break things. NUnit has evolved and many different Assert, Expect… methods have been added. These changes are all localized in the NUnit.Framework assembly which can be easily extended. As long as the test execution contract (TestFixture, Test, AssertException) remains stable it is possible to write test executors which can run tests written for NUnit 10 because the execution contract has not changed. It is possible to write software which executes other components in a version independent way but this is only feasible if the interaction model is relatively simple. Versioning software is hard and it looks like it will remain hard since you suddenly work in a severely constrained environment when you try to innovate and to keep everything backwards compatible at the same time. These are contradicting goals and do not play well together. The easiest way out of this is to carefully watch what your customers are doing with your software. Minimizing the impact is much easier when you do not need to guess how many people will be broken when this or that is removed.

Read the article

SQL SERVER – Concurrency Basics – Guest Post by Vinod Kumar

- by pinaldave

This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions from SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. Learning is always fun when it comes to SQL Server and learning the basics again can be more fun. I did write about Transaction Logs and recovery over my blogs and the concept of simplifying the basics is a challenge. In the real world we always see checks and queues for a process – say railway reservation, banks, customer supports etc there is a process of line and queue to facilitate everyone. Shorter the queue higher is the efficiency of system (a.k.a higher is the concurrency). Every database does implement this using checks like locking, blocking mechanisms and they implement the standards in a way to facilitate higher concurrency. In this post, let us talk about the topic of Concurrency and what are the various aspects that one needs to know about concurrency inside SQL Server. Let us learn the concepts as one-liners: Concurrency can be defined as the ability of multiple processes to access or change shared data at the same time. The greater the number of concurrent user processes that can be active without interfering with each other, the greater the concurrency of the database system. Concurrency is reduced when a process that is changing data prevents other processes from reading that data or when a process that is reading data prevents other processes from changing that data. Concurrency is also affected when multiple processes are attempting to change the same data simultaneously. Two approaches to managing concurrent data access: Optimistic Concurrency Model Pessimistic Concurrency Model Concurrency Models Pessimistic Concurrency Default behavior: acquire locks to block access to data that another process is using. Assumes that enough data modification operations are in the system that any given read operation is likely affected by a data modification made by another user (assumes conflicts will occur). Avoids conflicts by acquiring a lock on data being read so no other processes can modify that data. Also acquires locks on data being modified so no other processes can access the data for either reading or modifying. Readers block writer, writers block readers and writers. Optimistic Concurrency Assumes that there are sufficiently few conflicting data modification operations in the system that any single transaction is unlikely to modify data that another transaction is modifying. Default behavior of optimistic concurrency is to use row versioning to allow data readers to see the state of the data before the modification occurs. Older versions of the data are saved so a process reading data can see the data as it was when the process started reading and not affected by any changes being made to that data. Processes modifying the data is unaffected by processes reading the data because the reader is accessing a saved version of the data rows. Readers do not block writers and writers do not block readers, but, writers can and will block writers. Transaction Processing A transaction is the basic unit of work in SQL Server. Transaction consists of SQL commands that read and update the database but the update is not considered final until a COMMIT command is issued (at least for an explicit transaction: marked with a BEGIN TRAN and the end is marked by a COMMIT TRAN or ROLLBACK TRAN). Transactions must exhibit all the ACID properties of a transaction. ACID Properties Transaction processing must guarantee the consistency and recoverability of SQL Server databases. Ensures all transactions are performed as a single unit of work regardless of hardware or system failure. A – Atomicity C – Consistency I – Isolation D- Durability Atomicity: Each transaction is treated as all or nothing – it either commits or aborts. Consistency: ensures that a transaction won’t allow the system to arrive at an incorrect logical state – the data must always be logically correct. Consistency is honored even in the event of a system failure. Isolation: separates concurrent transactions from the updates of other incomplete transactions. SQL Server accomplishes isolation among transactions by locking data or creating row versions. Durability: After a transaction commits, the durability property ensures that the effects of the transaction persist even if a system failure occurs. If a system failure occurs while a transaction is in progress, the transaction is completely undone, leaving no partial effects on data. Transaction Dependencies In addition to supporting all four ACID properties, a transaction might exhibit few other behaviors (known as dependency problems or consistency problems). Lost Updates: Occur when two processes read the same data and both manipulate the data, changing its value and then both try to update the original data to the new value. The second process might overwrite the first update completely. Dirty Reads: Occurs when a process reads uncommitted data. If one process has changed data but not yet committed the change, another process reading the data will read it in an inconsistent state. Non-repeatable Reads: A read is non-repeatable if a process might get different values when reading the same data in two reads within the same transaction. This can happen when another process changes the data in between the reads that the first process is doing. Phantoms: Occurs when membership in a set changes. It occurs if two SELECT operations using the same predicate in the same transaction return a different number of rows. Isolation Levels SQL Server supports 5 isolation levels that control the behavior of read operations. Read Uncommitted All behaviors except for lost updates are possible. Implemented by allowing the read operations to not take any locks, and because of this, it won’t be blocked by conflicting locks acquired by other processes. The process can read data that another process has modified but not yet committed. When using the read uncommitted isolation level and scanning an entire table, SQL Server can decide to do an allocation order scan (in page-number order) instead of a logical order scan (following page pointers). If another process doing concurrent operations changes data and move rows to a new location in the table, the allocation order scan can end up reading the same row twice. Also can happen if you have read a row before it is updated and then an update moves the row to a higher page number than your scan encounters later. Performing an allocation order scan under Read Uncommitted can cause you to miss a row completely – can happen when a row on a high page number that hasn’t been read yet is updated and moved to a lower page number that has already been read. Read Committed Two varieties of read committed isolation: optimistic and pessimistic (default). Ensures that a read never reads data that another application hasn’t committed. If another transaction is updating data and has exclusive locks on data, your transaction will have to wait for the locks to be released. Your transaction must put share locks on data that are visited, which means that data might be unavailable for others to use. A share lock doesn’t prevent others from reading but prevents them from updating. Read committed (snapshot) ensures that an operation never reads uncommitted data, but not by forcing other processes to wait. SQL Server generates a version of the changed row with its previous committed values. Data being changed is still locked but other processes can see the previous versions of the data as it was before the update operation began. Repeatable Read This is a Pessimistic isolation level. Ensures that if a transaction revisits data or a query is reissued the data doesn’t change. That is, issuing the same query twice within a transaction cannot pickup any changes to data values made by another user’s transaction because no changes can be made by other transactions. However, this does allow phantom rows to appear. Preventing non-repeatable read is a desirable safeguard but cost is that all shared locks in a transaction must be held until the completion of the transaction. Snapshot Snapshot Isolation (SI) is an optimistic isolation level. Allows for processes to read older versions of committed data if the current version is locked. Difference between snapshot and read committed has to do with how old the older versions have to be. It’s possible to have two transactions executing simultaneously that give us a result that is not possible in any serial execution. Serializable This is the strongest of the pessimistic isolation level. Adds to repeatable read isolation level by ensuring that if a query is reissued rows were not added in the interim, i.e, phantoms do not appear. Preventing phantoms is another desirable safeguard, but cost of this extra safeguard is similar to that of repeatable read – all shared locks in a transaction must be held until the transaction completes. In addition serializable isolation level requires that you lock data that has been read but also data that doesn’t exist. Ex: if a SELECT returned no rows, you want it to return no. rows when the query is reissued. This is implemented in SQL Server by a special kind of lock called the key-range lock. Key-range locks require that there be an index on the column that defines the range of values. If there is no index on the column, serializable isolation requires a table lock. Gets its name from the fact that running multiple serializable transactions at the same time is equivalent of running them one at a time. Now that we understand the basics of what concurrency is, the subsequent blog posts will try to bring out the basics around locking, blocking, deadlocks because they are the fundamental blocks that make concurrency possible. Now if you are with me – let us continue learning for SQL Server Locking Basics. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Concurrency

Read the article

Thinktecture.IdentityModel: WIF Support for WCF REST Services and OData

- by Your DisplayName here!

The latest drop of Thinktecture.IdentityModel includes plumbing and support for WIF, claims and tokens for WCF REST services and Data Services (aka OData). Cibrax has an alternative implementation that uses the WCF Rest Starter Kit. His recent post reminded me that I should finally “document” that part of our library. Features include: generic plumbing for all WebServiceHost derived WCF services support for SAML and SWT tokens support for ClaimsAuthenticationManager and ClaimsAuthorizationManager based solely on native WCF extensibility points (and WIF) This post walks you through the setup of an OData / WCF DataServices endpoint with token authentication and claims support. This sample is also included in the codeplex download along a similar sample for plain WCF REST services. Setting up the Data Service To prove the point I have created a simple WCF Data Service that renders the claims of the current client as an OData set. public class ClaimsData { public IQueryable<ViewClaim> Claims { get { return GetClaims().AsQueryable(); } } private List<ViewClaim> GetClaims() { var claims = new List<ViewClaim>(); var identity = Thread.CurrentPrincipal.Identity as IClaimsIdentity; int id = 0; identity.Claims.ToList().ForEach(claim => { claims.Add(new ViewClaim { Id = ++id, ClaimType = claim.ClaimType, Value = claim.Value, Issuer = claim.Issuer }); }); return claims; } } …and hooked that up with a read only data service: public class ClaimsDataService : DataService<ClaimsData> { public static void InitializeService(IDataServiceConfiguration config) { config.SetEntitySetAccessRule("*", EntitySetRights.AllRead); } } Enabling WIF Before you enable WIF, you should generate your client proxies. Afterwards the service will only accept requests with an access token – and svcutil does not support that. All the WIF magic is done in a special service authorization manager called the FederatedWebServiceAuthorizationManager. This code checks incoming calls to see if the Authorization HTTP header (or X-Authorization for environments where you are not allowed to set the authorization header) contains a token. This header must either start with SAML access_token= or WRAP access_token= (for SAML or SWT tokens respectively). For SAML validation, the plumbing uses the normal WIF configuration. For SWT you can either pass in a SimpleWebTokenRequirement or the SwtIssuer, SwtAudience and SwtSigningKey app settings are checked.If the token can be successfully validated, ClaimsAuthenticationManager and ClaimsAuthorizationManager are invoked and the IClaimsPrincipal gets established. The service authorization manager gets wired up by the FederatedWebServiceHostFactory: public class FederatedWebServiceHostFactory : WebServiceHostFactory { protected override ServiceHost CreateServiceHost( Type serviceType, Uri[] baseAddresses) { var host = base.CreateServiceHost(serviceType, baseAddresses); host.Authorization.ServiceAuthorizationManager = new FederatedWebServiceAuthorizationManager(); host.Authorization.PrincipalPermissionMode = PrincipalPermissionMode.Custom; return host; } } The last step is to set up the .svc file to use the service host factory (see the sample download). Calling the Service To call the service you need to somehow get a token. This is up to you. You can either use WSTrustChannelFactory (for the full CLR), WSTrustClient (Silverlight) or some other way to obtain a token. The sample also includes code to generate SWT tokens for testing – but the whole WRAP/SWT support will be subject of a separate post. I created some extensions methods for the most common web clients (WebClient, HttpWebRequest, DataServiceContext) that allow easy setting of the token, e.g.: public static void SetAccessToken(this DataServiceContext context, string token, string type, string headerName) { context.SendingRequest += (s, e) => { e.RequestHeaders[headerName] = GetHeader(token, type); }; } Making a query against the Data Service could look like this: static void CallService(string token, string type) { var data = new ClaimsData(new Uri("https://server/odata.svc/")); data.SetAccessToken(token, type); data.Claims.ToList().ForEach(c => Console.WriteLine("{0}\n {1}\n ({2})\n", c.ClaimType, c.Value, c.Issuer)); } HTH

Read the article

You should NOT be writing jQuery in SharePoint if…

- by Mark Rackley

Yes… another one of these posts. What can I say? I’m a pot stirrer.. a rabble rouser *rabble rabble* jQuery in SharePoint seems to be a fairly polarizing issue with one side thinking it is the most awesome thing since Princess Leia as the slave girl in Return of the Jedi and the other half thinking it is the worst idea since Mannequin 2: On the Move. The correct answer is OF COURSE “it depends”. But what are those deciding factors that make jQuery an awesome fit or leave a bad taste in your mouth? Let’s see if I can drive the discussion here with some polarizing comments of my own… I know some of you are getting ready to leave your comments even now before reading the rest of the blog, which is great! Iron sharpens iron… These discussions hopefully open us up to understanding the entire process better and think about things in a different way. You should not be writing jQuery in SharePoint if you are not a developer… Let’s start off with my most polarizing and rant filled portion of the blog post. If you don’t know what you are doing or you don’t have a background that helps you understand the implications of what you are writing then you should not be writing jQuery in SharePoint! I truly believe that one of the biggest reasons for the jQuery haters is because of all the bad jQuery out there. If you don’t know what you are doing you can do some NASTY things! One of the best stories I’ve heard about this is from my good friend John Ferringer (@ferringer). John tells this story during our Mythbusters session we do together. One of his clients was undergoing a Denial of Service attack and they couldn’t figure out what was going on! After much searching they found that some genius jQuery developer wrote some code for an image rotator, but did not take into account what happens when there are no images to load! The code just kept hitting the servers over and over and over again which prevented anything else from getting done! Now, I’m NOT saying that I have not done the same sort of thing in the past or am immune from such mistakes. My point is that if you don’t know what you are doing, there are very REAL consequences that can have a major impact on your organization AND they will be hard to track down. Think how happy your boss will be after you copy and pasted some jQuery from a blog without understanding what it does, it brings down the farm, AND it takes them 3 days to track it back to you. :/ Good times will not be had. Like it or not JavaScript/jQuery is a programming language. While you .NET people sit on your high horses because your code is compiled and “runs faster” (also debatable), the rest of us will be actually getting work done and delivering solutions while you are trying to figure out why your widget won’t deploy. I can pick at that scab because I write .NET code too and speak from experience. I can do both, and do both well. So, I am not speaking from ignorance here. In JavaScript/jQuery you have variables, loops, conditionals, functions, arrays, events, and built in methods. If you are not a developer you just aren’t going to take advantage of all of that and use it correctly. Ahhh.. but there is hope! There is a lot of jQuery resources out there to help you learn and learn well! There are many experts on the subject that will gladly tell you when you are smoking crack. I just this minute saw a tweet from @cquick with a link to: “jQuery Fundamentals”. I just glanced through it and this may be a great primer for you aspiring jQuery devs. Take advantage of all the resources and become a developer! Hey, it will look awesome on your resume right? You should not be writing jQuery in SharePoint if it depends too much on client resources for a good user experience I’ve said it once and I’ll say it over and over until you understand. jQuery is executed on the client’s computer. Got it? If you are looping through hundreds of rows of data, searching through an enormous DOM, or performing many calculations it is going to take some time! AND if your user happens to be sitting on some old PC somewhere that they picked up at a garage sale their experience will be that much worse! If you can’t give the user a good experience they will not use the site. So, if jQuery is causing the user to have a bad experience, don’t use it. I sometimes go as far to say that you should NOT go to jQuery as a first option for external facing web sites because you have ZERO control over what the end user’s computer will be. You just can’t guarantee an awesome user experience all of the time. Ahhh… but you have no choice? (where have I heard that before?). Well… if you really have no choice, here are some tips to help improve the experience: Avoid screen scraping This is not 1999 and SharePoint is not an old green screen from a mainframe… so why are you treating it like it is? Screen scraping is time consuming and client intensive. Take advantage of tools like SPServices to do your data retrieval when possible. Fine tune your DOM searches A lot of time can be eaten up just searching the DOM and ignoring table rows that you don’t need. Write better jQuery to only loop through tables rows that you need, or only access specific elements you need. Take advantage of Element ID’s to return the one element you are looking for instead of looping through all the DOM over and over again. Write better jQuery Remember this is development. Think about how you can write cleaner, faster jQuery. This directly relates to the previous point of improving your DOM searches, but also when using arrays, variables and loops. Do you REALLY need to loop through that array 3 times? How can you knock it down to 2 times or even 1? When you have lots of calculations and data that you are manipulating every operation adds up. Think about how you can streamline it. Back in the old days before RAM was abundant, Cores were plentiful and dinosaurs roamed the earth, us developers had to take performance into account in everything we did. It’s a lost art that really needs to be used here. You should not be writing jQuery in SharePoint if you are sending a lot of data over the wire… Developer: “Awesome… you can easily call SharePoint’s web services to retrieve and write data using SPServices!” Administrator: “Crap! you can easily call SharePoint’s web services to retrieve and write data using SPServices!” SPServices may indeed be the best thing that happened to SharePoint since the invention of SharePoint Saturdays by Godfather Lotter… BUT you HAVE to use it wisely! (I REFUSE to make the Spiderman reference). If you do not know what you are doing your code will bring back EVERY field and EVERY row from a list and push that over the internet with all that lovely XML wrapped around it. That can be a HUGE amount of data and will GREATLY impact performance! Calling several web service methods at the same time can cause the same problem and can negatively impact your SharePoint servers. These problems, thankfully, are not difficult to rectify if you are careful: Limit list data retrieved Use CAML to reduce the number of rows returned and limit the fields returned using ViewFields. You should definitely be doing this regardless. If you aren’t I hope your admin thumps you upside the head. Batch large list updates You may or may not have noticed that if you try to do large updates (hundreds of rows) that the performance is either completely abysmal or it fails over half the time. You can greatly improve performance and avoid timeouts by breaking up your updates into several smaller updates. I don’t know if there is a magic number for best performance, it really depends on how much data you are sending back more than the number of rows. However, I have found that 200 rows generally works well. Play around and find the right number for your situation. Delay Web Service calls when possible One of the cool things about jQuery and SPServices is that you can delay queries to the server until they are actually needed instead of doing them all at once. This can lead to performance improvements over DataViewWebParts and even .NET code in the right situations. So, don’t load the data until it’s needed. In some instances you may not need to retrieve the data at all, so why retrieve it ALL the time? You should not be writing jQuery in SharePoint if there is a better solution… jQuery is NOT the silver bullet in SharePoint, it is not the answer to every question, it is just another tool in the developers toolkit. I urge all developers to know what options exist out there and choose the right one! Sometimes it will be jQuery, sometimes it will be .NET, sometimes it will be XSL, and sometimes it will be some other choice… So, when is there a better solution to jQuery? When you can’t get away from performance problems Sometimes jQuery will just give you horrible performance regardless of what you do because of unavoidable obstacles. In these situations you are going to have to figure out an alternative. Can I do it with a DVWP or do I have to crack open Visual Studio? When you need to do something that jQuery can’t do There are lots of things you can’t do in jQuery like elevate privileges, event handlers, workflows, or interact with back end systems that have no web service interface. It just can’t do everything. When it can be done faster and more efficiently another way Why are you spending time to write jQuery to do a DataViewWebPart that would take 5 minutes? Or why are you trying to implement complicated logic that would be simple to do in .NET? If your answer is that you don’t have the option, okay. BUT if you do have the option don’t reinvent the wheel! Take advantage of the other tools. The answer is not always jQuery… sorry… the kool-aid tastes good, but sweet tea is pretty awesome too. You should not be using jQuery in SharePoint if you are a moron… Let’s finish up the blog on a high note… Yes.. it’s true, I sometimes type things just to get a reaction… guess this section title might be a good example, but it feels good sometimes just to type the words that a lot of us think… So.. don’t be that guy! Another good buddy of mine that works for Microsoft told me. “I loved jQuery in SharePoint…. until I had to support it.”. He went on to explain that some user was making several web service calls on a page using jQuery and then was calling Microsoft and COMPLAINING because the page took so long to load… DUH! What do you expect to happen when you are pushing that much data over the wire and are making that many web service calls at once!! It’s one thing to write that kind of code and accept it’s just going to take a while, it’s COMPLETELY another issue to do that and then complain when it’s not lightning fast! Someone’s gene pool needs some chlorine. So, I think this is a nice summary of the blog… DON’T be that guy… don’t be a moron. How can you stop yourself from being a moron? Ah.. glad you asked, here are some tips: Think Is jQuery the right solution to my problem? Is there a better approach? What are the implications and pitfalls of using jQuery in this situation? Search What are others doing? Does someone have a better solution? Is there a third party library that does the same thing I need? Plan Write good jQuery. Limit calculations and data sent over the wire and don’t reinvent the wheel when possible. Test Okay, it works well on your machine. Try it on others ESPECIALLY if this is for an external site. Test with empty data. Test with hundreds of rows of data. Test as many scenarios as possible. Monitor those server resources to see the impact there as well. Ask the experts As smart as you are, there are people smarter than you. Even the experts talk to each other to make sure they aren't doing something stupid. And for the MOST part they are pretty nice guys. Marc Anderson and Christophe Humbert are two guys who regularly keep me in line. Make sure you aren’t doing something stupid. Repeat So, when you think you have the best solution possible, repeat the steps above just to be safe. Conclusion jQuery is an awesome tool and has come in handy on many occasions. I’m even teaching a 1/2 day SharePoint & jQuery workshop at the upcoming SPTechCon in Boston if you want to berate me in person. However, it’s only as awesome as the developer behind the keyboard. It IS development and has its pitfalls. Knowledge and experience are invaluable to giving the user the best experience possible. Let’s face it, in the end, no matter our opinions, prejudices, or ego providing our clients, customers, and users with the best solution possible is what counts. Period… end of sentence…

Read the article

The last MVVM you'll ever need?

- by Nuri Halperin

As my MVC projects mature and grow, the need to have some omnipresent, ambient model properties quickly emerge. The application no longer has only one dynamic pieced of data on the page: A sidebar with a shopping cart, some news flash on the side – pretty common stuff. The rub is that a controller is invoked in context of a single intended request. The rest of the data, even though it could be just as dynamic, is expected to appear on it's own. There are many solutions to this scenario. MVVM prescribes creating elaborate objects which expose your new data as a property on some uber-object with more properties exposing the "side show" ambient data. The reason I don't love this approach is because it forces fairly acute awareness of the view, and soon enough you have many MVVM objects laying around, and views have to start doing null-checks in order to ensure you really supplied all the values before binding to them. Ick. Just as unattractive is the ViewData dictionary. It's not strongly typed, and in both this and the MVVM approach someone has to populate these properties – n'est pas? Where does that live? With MVC2, we get the formerly-futures feature Html.RenderAction(). The feature allows you plant a line in a view, of the format: <% Html.RenderAction("SessionInterest", "Session"); %> While this syntax looks very clean, I can't help being bothered by it. MVC was touting a very strong separation of concerns, the Model taking on the role of the business logic, the controller handling route and performing minimal view-choosing operations and the views strictly focused on rendering out angled-bracket tags. The RenderAction() syntax has the view calling some controller and invoking it inline with it's runtime rendering. This – to my taste – embeds too much knowledge of controllers into the view's code – which was allegedly forbidden. The one way flow "Controller Receive Data –> Controller invoke Model –> Controller select view –> Controller Hand data to view" now gets a "View calls controller and gets it's own data" which is not so one-way anymore. Ick. I toyed with some other solutions a bit, including some base controllers, special view classes etc. My current favorite though is making use of the ExpandoObject and dynamic features with C# 4.0. If you follow Phil Haack or read a bit from David Heyden you can see the general picture emerging. The game changer is that using the new dynamic syntax, one can sprout properties on an object and make use of them in the view. Well that beats having a bunch of uni-purpose MVVM's any day! Rather than statically exposed properties, we'll just use the capability of adding members at runtime. Armed with new ideas and syntax, I went to work: First, I created a factory method to enrich the focuse object: public static class ModelExtension { public static dynamic Decorate(this Controller controller, object mainValue) { dynamic result = new ExpandoObject(); result.Value = mainValue; result.SessionInterest = CodeCampBL.SessoinInterest(); result.TagUsage = CodeCampBL.TagUsage(); return result; } } This gives me a nice fluent way to have the controller add the rest of the ambient "side show" items (SessionInterest, TagUsage in this demo) and expose them all as the Model: public ActionResult Index() { var data = SyndicationBL.Refresh(TWEET_SOURCE_URL); dynamic result = this.Decorate(data); return View(result); } So now what remains is that my view knows to expect a dynamic object (rather than statically typed) so that the ASP.NET page compiler won't barf: <%@ Page Language="C#" Title="Ambient Demo" MasterPageFile="~/Views/Shared/Ambient.Master" Inherits="System.Web.Mvc.ViewPage<dynamic>" %> Notice the generic ViewPage<dynamic>. It doesn't work otherwise. In the page itself, Model.Value property contains the main data returned from the controller. The nice thing about this, is that the master page (Ambient.Master) also inherits from the generic ViewMasterPage<dynamic>. So rather than the page worrying about all this ambient stuff, the side bars and panels for ambient data all reside in a master page, and can be rendered using the RenderPartial() syntax: <% Html.RenderPartial("TagCloud", Model.SessionInterest as Dictionary<string, int>); %> Note here that a cast is necessary. This is because although dynamic is magic, it can't figure out what type this property is, and wants you to give it a type so its binder can figure out the right property to bind to at runtime. I use as, you can cast if you like. So there we go – no violation of MVC, no explosion of MVVM models and voila – right? Well, I could not let this go without a tweak or two more. The first thing to improve, is that some views may not need all the properties. In that case, it would be a waste of resources to populate every property. The solution to this is simple: rather than exposing properties, I change d the factory method to expose lambdas - Func<T> really. So only if and when a view accesses a member of the dynamic object does it load the data. public static class ModelExtension { // take two.. lazy loading! public static dynamic LazyDecorate(this Controller c, object mainValue) { dynamic result = new ExpandoObject(); result.Value = mainValue; result.SessionInterest = new Func<Dictionary<string, int>>(() => CodeCampBL.SessoinInterest()); result.TagUsage = new Func<Dictionary<string, int>>(() => CodeCampBL.TagUsage()); return result; } } Now that lazy loading is in place, there's really no reason not to hook up all and any possible ambient property. Go nuts! Add them all in – they won't get invoked unless used. This now requires changing the signature of usage on the ambient properties methods –adding some parenthesis to the master view: <% Html.RenderPartial("TagCloud", Model.SessionInterest() as Dictionary<string, int>); %> And, of course, the controller needs to call LazyDecorate() rather than the old Decorate(). The final touch is to introduce a convenience method to the my Controller class , so that the tedium of calling Decorate() everywhere goes away. This is done quite simply by adding a bunch of methods, matching View(object), View(string,object) signatures of the Controller class: public ActionResult Index() { var data = SyndicationBL.Refresh(TWEET_SOURCE_URL); return AmbientView(data); } //these methods can reside in a base controller for the solution: public ViewResult AmbientView(dynamic data) { dynamic result = ModelExtension.LazyDecorate(this, data); return View(result); } public ViewResult AmbientView(string viewName, dynamic data) { dynamic result = ModelExtension.LazyDecorate(this, data); return View(viewName, result); } The call to AmbientView now replaces any call the View() that requires the ambient data. DRY sattisfied, lazy loading and no need to replace core pieces of the MVC pipeline. I call this a good MVC day. Enjoy!

Read the article

The Proper Use of the VM Role in Windows Azure

- by BuckWoody

At the Professional Developer’s Conference (PDC) in 2010 we announced an addition to the Computational Roles in Windows Azure, called the VM Role. This new feature allows a great deal of control over the applications you write, but some have confused it with our full infrastructure offering in Windows Hyper-V. There is a proper architecture pattern for both of them. Virtualization Virtualization is the process of taking all of the hardware of a physical computer and replicating it in software alone. This means that a single computer can “host” or run several “virtual” computers. These virtual computers can run anywhere - including at a vendor’s location. Some companies refer to this as Cloud Computing since the hardware is operated and maintained elsewhere. IaaS The more detailed definition of this type of computing is called Infrastructure as a Service (Iaas) since it removes the need for you to maintain hardware at your organization. The operating system, drivers, and all the other software required to run an application are still under your control and your responsibility to license, patch, and scale. Microsoft has an offering in this space called Hyper-V, that runs on the Windows operating system. Combined with a hardware hosting vendor and the System Center software to create and deploy Virtual Machines (a process referred to as provisioning), you can create a Cloud environment with full control over all aspects of the machine, including multiple operating systems if you like. Hosting machines and provisioning them at your own buildings is sometimes called a Private Cloud, and hosting them somewhere else is often called a Public Cloud. State-ful and Stateless Programming This paradigm does not create a new, scalable way of computing. It simply moves the hardware away. The reason is that when you limit the Cloud efforts to a Virtual Machine, you are in effect limiting the computing resources to what that single system can provide. This is because much of the software developed in this environment maintains “state” - and that requires a little explanation. “State-ful programming” means that all parts of the computing environment stay connected to each other throughout a compute cycle. The system expects the memory, CPU, storage and network to remain in the same state from the beginning of the process to the end. You can think of this as a telephone conversation - you expect that the other person picks up the phone, listens to you, and talks back all in a single unit of time. In “Stateless” computing the system is designed to allow the different parts of the code to run independently of each other. You can think of this like an e-mail exchange. You compose an e-mail from your system (it has the state when you’re doing that) and then you walk away for a bit to make some coffee. A few minutes later you click the “send” button (the network has the state) and you go to a meeting. The server receives the message and stores it on a mail program’s database (the mail server has the state now) and continues working on other mail. Finally, the other party logs on to their mail client and reads the mail (the other user has the state) and responds to it and so on. These events might be separated by milliseconds or even days, but the system continues to operate. The entire process doesn’t maintain the state, each component does. This is the exact concept behind coding for Windows Azure. The stateless programming model allows amazing rates of scale, since the message (think of the e-mail) can be broken apart by multiple programs and worked on in parallel (like when the e-mail goes to hundreds of users), and only the order of re-assembling the work is important to consider. For the exact same reason, if the system makes copies of those running programs as Windows Azure does, you have built-in redundancy and recovery. It’s just built into the design. The Difference Between Infrastructure Designs and Platform Designs When you simply take a physical server running software and virtualize it either privately or publicly, you haven’t done anything to allow the code to scale or have recovery. That all has to be handled by adding more code and more Virtual Machines that have a slight lag in maintaining the running state of the system. Add more machines and you get more lag, so the scale is limited. This is the primary limitation with IaaS. It’s also not as easy to deploy these VM’s, and more importantly, you’re often charged on a longer basis to remove them. your agility in IaaS is more limited. Windows Azure is a Platform - meaning that you get objects you can code against. The code you write runs on multiple nodes with multiple copies, and it all works because of the magic of Stateless programming. you don’t worry, or even care, about what is running underneath. It could be Windows (and it is in fact a type of Windows Server), Linux, or anything else - but that' isn’t what you want to manage, monitor, maintain or license. You don’t want to deploy an operating system - you want to deploy an application. You want your code to run, and you don’t care how it does that. Another benefit to PaaS is that you can ask for hundreds or thousands of new nodes of computing power - there’s no provisioning, it just happens. And you can stop using them quicker - and the base code for your application does not have to change to make this happen. Windows Azure Roles and Their Use If you need your code to have a user interface, in Visual Studio you add a Web Role to your project, and if the code needs to do work that doesn’t involve a user interface you can add a Worker Role. They are just containers that act a certain way. I’ll provide more detail on those later. Note: That’s a general description, so it’s not entirely accurate, but it’s accurate enough for this discussion. So now we’re back to that VM Role. Because of the name, some have mistakenly thought that you can take a Virtual Machine running, say Linux, and deploy it to Windows Azure using this Role. But you can’t. That’s not what it is designed for at all. If you do need that kind of deployment, you should look into Hyper-V and System Center to create the Private or Public Infrastructure as a Service. What the VM Role is actually designed to do is to allow you to have a great deal of control over the system where your code will run. Let’s take an example. You’ve heard about Windows Azure, and Platform programming. You’re convinced it’s the right way to code. But you have a lot of things you’ve written in another way at your company. Re-writing all of your code to take advantage of Windows Azure will take a long time. Or perhaps you have a certain version of Apache Web Server that you need for your code to work. In both cases, you think you can (or already have) code the the software to be “Stateless”, you just need more control over the place where the code runs. That’s the place where a VM Role makes sense. Recap Virtualizing servers alone has limitations of scale, availability and recovery. Microsoft’s offering in this area is Hyper-V and System Center, not the VM Role. The VM Role is still used for running Stateless code, just like the Web and Worker Roles, with the exception that it allows you more control over the environment of where that code runs.

Read the article

Special thanks to everyone that helped me in 2010.

- by mbcrump

2010 has been a very good year for me and I wanted to create a list and thank everyone for what they have done for me. I also wanted to thank everyone for reading and subscribing to my blog. It is hard to believe that people actually want to read what I write. I feel like I owe a huge thanks to everyone listed below. Looking back upon 2010, I feel that I’ve grown as a developer and you are part of that reason. Sometimes we get caught up in day to day work and forget to give thanks to those that helped us along the way. The list below is mine, it includes people and companies. This list is obviously not going to include everyone that has helped, just those that have stood out in my mind. When I think back upon 2010, their names keep popping up in my head. So here goes, in no particular order. People Dave Campbell – For everything he has done for the Silverlight Community with his Silverlight Cream blog. I can’t think of a better person to get recognition at the Silverlight FireStarter event. I also wanted to thank him for spending several hours of his time helping me track down a bug in my feedburner account. Victor Gaudioso – For his large collection of video tutorials on his blog and the passion and enthusiasm he has for Silverlight. We have talked on the phone and I’ve never met anyone so fired up for Silverlight. Kunal Chowdhury – Kunal has always been available for me to bounce ideas off of. Kunal has also answered a lot of questions that stumped me. His blog and CodeProject article have green a great help to me and the Silverlight Community. Glen Gordon – I was looking frantically for a Windows Phone 7 several months before release and Glen found one for me. This allowed me to start a blog series on the Windows Phone 7 hardware and developing an application from start to finish that Scott Guthrie retweeted. Jeff Blankenburg – For listening to my complaints in the early stages of Windows Phone 7. Jeff was always very polite and gave me his cell phone number to talk it over. He also walked me through several problems that I was having early on. Pete Brown – For writing Silverlight 4 in Action. This book is definitely a labor of love. I followed Pete on Twitter as he was writing it and he spent a lot of late nights and weekends working on it. I felt a lot smarter after reading it the first time. The second time was even better. John Papa – For all of his work on the Silverlight Firestarter and the Silverlight community in general. He has also helped me on a personal level with several things. Daniel Heisler – For putting up with me the past year while we worked on many .NET projects together in 2010. Alvin Ashcraft – For publishing a daily blog post on the best of .NET links. He has linked to my site many times and I really appreciate what he does for the community. Chris Alcock – For publishing the Morning Brew every weekday. I remember when I first appeared on his site, I started getting hundreds of hits on my site and wondered if I was getting a DOS attack or something. It was great to find out that Chris had linked to one of my articles. Joel Cochran – For spending a week teaching “Blend-O-Rama”. This was my one of my favorite sessions of this year. I learned a lot about Expression Blend from it and the best part was that it was free and during lunchtime. Jeremy Likness – Jeremy is smart – very smart. I have learned a lot from Jeremy over the past year. He is also involved in the Silverlight community in every way possible, from forums to blog post to screencast to open source. It goes on and on. The people that I met at VSLive Orlando 2010. I had a great time chatting with Walt Ritscher, Wallace McClure, Tim Huckabee and David Platt. Also a special thanks to all of my friends on Twitter like @wilhil, @DBVaughan, @DataArtist, @wbm, @DirkStrauss and @rsringeri and many many more. Software Companies / Events / May of gave me FREE stuff. =) Microsoft (3) – I was sent a free coupon code by Microsoft to take the Silverlight 4 Beta Exam. I jumped on the offer and took the exam. It was great being selected to try out the exam before it goes public even though Microsoft eventually published a universal coupon code for everyone. I am still waiting to find out if I passed the exam. My fingers are crossed. Microsoft reaching out to me with some questions regarding the .NET Community. I’ve never had a company contact me with such interest in the community. Having a contest where 75 people could win a $100 gift certificate and a T-Shirt for submitting a Windows Phone 7 app. I submitted my app and won. All of the free launch events this year (Windows Phone 7, Visual Studio 2010, ASP.NET MVC). Wintellect – For providing an awesome day of free technical training called T.E.N. Where else can you get free training from some of the best programmers in the world? I also won a contest from them that included a NETAdvantage Ultimate License from Infragistics. VSLive – I attended the Orlando 2010 Conference and it was the best developer’s conference that I have ever attended. I got to know a lot of people at this conference and hang out with many wonderful speakers. I live tweeted the event and while it may have annoyed some, the organizers of VSLive loved it. I won the contest on Twitter and they invited me back to the 2011 session of my choice. This is a very nice gift and I really appreciate the generosity. BarcodeLib.com – For providing free barcode generating tools for a Non-Profit ASP.NET project that I was working on. Their third party controls really made this a breeze compared to my existing solution. NDepend – It is absolutely the best tool to improve code quality. The product is extremely large and I would recommend heading over to their site to check it out. Silverlight Spy – I was writing a blog post on Silverlight Spy and Koen Zwikstra provided a FREE license to me. If you ever wanted to peek inside of a Silverlight Application then this is the tool for you. He is also working on a version that will support OOB and Windows Phone 7. I would recommend checking out his site. Birmingham .NET Users Group / Silverlight Nights User Group – It takes a lot of time to put together a user group meeting every month yet it always seems to happen. I don’t want to name names for fear of leaving someone out but both of these User Groups are excellent if you live in the Birmingham, Alabama area. Publishing Companies Manning Publishing – For giving me early access to Silverlight 4 in Action by Pete Brown. It was really nice to be able to read this awesome book while Pete was writing it. I was also one of the first people to publish a review of the book. Sams Publishing and DZone – For providing a copy of Silverlight 4 Unleashed by Laurent Bugnion for me to review for their site. The review is coming in January 2011. Special Shoutout to the following 3rd Party Silverlight Controls It has been a great pleasure to work with the following companies on 3rd Party Control Giveaways every month. It always amazes me how every 3rd Party Control company is so eager to help out the community. I’ve never been turned down by any of these companies! These giveaways have sparked a lot of interest in Silverlight and hopefully I can continue giving away a new set every month. If you are a 3rd Party Control company and are interested in participating in these giveaways then please email me at mbcrump29[at]gmail[d0t].com. The companies below have already participated in my giveaways: Infragistics (December 2010) - Win a set of Infragistics Silverlight Controls with Data Visualization! Mindscape (November 2010) - Mindscape Silverlight Controls + Free Mega Pack Contest Telerik (October 2010) - Win Telerik RadControls for Silverlight! ($799 Value) Again, I just wanted to say Thanks to everyone for helping me grow as a developer. Subscribe to my feed

Read the article

Reading All Users Session

- by imran_ku07

Introduction : InProc Session is the widely used state management. Storing the session state Inproc is also the fastest method and is well-suited to small amounts of volatile data. Reading and writing current user Session is very easy. But some times we need to read all users session before taking a decision or sometimes we may need to check which users are currently active with the help of Session. But unfortunately there is no class in .Net Framework (i don't found myself) to read all user InProc Session Data. In this article i will use reflection to read all user Inproc Session. Description : This code will work equally in both MVC and webform, but for demonstration i will use a simple webform example. So let's create a simple Website and Add two aspx pages, Default.aspx and Default2.aspx. In Default.aspx just add a link to navigate to Default2.aspx and in Default.aspx.cs just add a Session. Default.aspx: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="Default" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html ><head runat="server"> <title>Untitled Page</title></head><body> <form id="form1" runat="server"> <div> <a href="Default2.aspx">Click to navigate to next page</a> </div> </form></body></html> Default.aspx.cs: using System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;public partial class Default : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { Session["User"] = "User" + DateTime.Now; }} Now when every user click this link will navigate to Default2.aspx where all the magic appears.Default2.aspx.cs: using System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;using System.Reflection;using System.Web.SessionState;public partial class Default2 : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { object obj = typeof(HttpRuntime).GetProperty("CacheInternal", BindingFlags.NonPublic | BindingFlags.Static).GetValue(null, null); Hashtable c2 = (Hashtable)obj.GetType().GetField("_entries", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(obj); foreach (DictionaryEntry entry in c2) { object o1 = entry.Value.GetType().GetProperty("Value", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(entry.Value, null); if (o1.GetType().ToString() == "System.Web.SessionState.InProcSessionState") { SessionStateItemCollection sess = (SessionStateItemCollection)o1.GetType().GetField("_sessionItems", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(o1); if (sess != null) { if (sess["User"] != null) { Label1.Text += sess["User"] + " is Active.<br>"; } } } } }} Now just open more than one browsers or more than one browser instance and then navigate to Default.aspx and click the link, you will see all the user's Session data. How this works : InProc session data is stored in the HttpRuntime’s internal cache in an implementation of ISessionStateItemCollection that implements ICollection. In this code, first of all i got CacheInternal Static Property of HttpRuntime class and then with the help of this object i got _entries private member which is of type ICollection. Then simply enumerate this dictionary and only take object of type System.Web.SessionState.InProcSessionState and finaly got SessionStateItemCollection for each user.Summary : In this article, I shows you how you can get all current user Sessions. However one thing you will find when executing this code is that it will not show the current user Session which is set in the current request context because Session will be saved after all the Page Events.

Search Results

Search found 4724 results on 189 pages for 'magic bullet dave'.

Page 181/189 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188 | Next Page >

- by mattalexx

- by Sam Martin

- by rkotulla

- by eddy147

- by Margaret

- by Joseph Yancey

- by pinaldave

- by REA_ANDREW

- by Program.X

- by Brenna Johnson-Oracle

- by constant

- by Rick Strahl

- by Martin Hinshelwood

- by nmarun

- by nmgomes

- by zowens

- by nikolaosk

- by Alois Kraus

- by pinaldave

- by Your DisplayName here!

- by Mark Rackley

- by Nuri Halperin

- by BuckWoody

- by mbcrump

- by imran_ku07

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188 | Next Page >