Search Results

Search found 5983 results on 240 pages for 'music on hold'.

Page 181/240 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• External Hard Drive Won't Mount - MAC OSX

  - by dtj

  I have a Western Digital hard drive that's about 4 or 5 years old. It's 500 GB, USB. I use it to backup my Mac every so often. I had it partitioned: 1 side for full backups, and the other side for general storage of music, installers, etc. I decided to get rid of the partition today and dump all the data. So I opened disk utility, and hit 'erase'. It started thinking and then disk utility crashed. After the crash, the hard drive won't mount, however disk utility still sees the drive, but not the individual volume within. I tried booting up Disk Warrior and no luck there either. It has the drive as an "unknown drive". When I hit rebuild, it goes through all it steps and then stops cause of this error: The drive "unknown" is severely damaged and DiskWarrior is unable to determine its case sensitivity What can I do at this point? There isn't any physical damage to the drive. Never been dropped or anything.

  Read the article

• Hardware for a home server running Windows Server 2008 R2 Hyper-V or Microsoft Hyper-V Server 2008 R2

  - by David Hayes

  Hi, I'm planning to build a server to do the following Act as a file server (videos, pictures music) Run Squeezebox server Run Zune Software to allow wireless syncing to Windows Phone 7 I'd also like to aim for Low power usage (i'd settle for less than the 90-100Watts I'm using atm Flexibility, I might want to add a web server or sharepoint or... Something I can learn/test on, work is mainly a Windows shop but I do have Linux experience too I'd like to take a look at App-V (application virtualization) too I'd like it to cost less than $1000 Quiet would be nice but not essential (it'll be in the basement) I'm thinking of getting a technet subscription to get access to Windows Server 2008 R2 at a reasonable price ($199) So my plan was this Get a bunch of 2TB Caviar green drives to RAID up (RAID 1 or 6 probably) Get a Quad core CPU (Intel i5/i7 probably) Install a Hypervisor Install w2k8 R2 Storage Server for a NAS Install Windows 7 Pro to run Zune/Squeeze box Install any other machines I want to play with Questions Can anyone see any issues with this or have any better ideas? Do you think I'd need an i7 over an i5? Is 4 cores enough/too much? Can anyone sugest a nice, reasonably priced case that will hold 6-8 drives and stay cool Should I wait for Sandy Bridge parts?

  Read the article

• Remote Desktop Connection to the same screen as on the monitor?

  - by Ricket

  I'm running Windows Home Server on, well, my server. It's in my entertainment center, hooked to my TV, and I use it to listen to music and watch movies. Right now I have a keyboard and mouse stuck beside my TV so that I'm able to load a movie. It would be nice, though, to be able to remotely control the screen. Remote Desktop Connection seems to open its own session in the background, separate from the session shown on the monitor. This doesn't do any good because things started via remote desktop must be closed or changed via remote desktop, and I can't start a movie with remote desktop and then see it from the screen. Is there a way to get Remote Desktop Connection to connect to the visible screen? I am currently using UltraVNC; it was doing the job, but it has its quirks. For instance, the problem just now that prompted me to ask this question; upon trying to connect, UltraVNC informs me that "Server closed connection - The server running as application". This is just one of several problems I've had with it, and I want something that is as reliable and low-maintenance as the built-in Remote Desktop Connection. (and free) If the answer to the above is no, I'm welcome to recommendations for a different remote desktop system to try.

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• Embed album art in OGG through command line in linux

  - by teratomata

  I want to convert my music from flac to ogg, and currently oggenc does that perfectly except for album art. Metaflac can output album art, however there seems to be no command line tool to embed album art into ogg. MP3Tag and EasyTag are able to do it, and there is a specification for it here which calls for the image to be base64 encoded. However so far I have been unsuccessful in being able to take an image file, converting it to base64 and embedding it into an ogg file. If I take a base64 encoded image from an ogg file that already has the image embedded, I can easily embed it into another image using vorbiscomment: vorbiscomment -l withimage.ogg > textfile vorbiscomment -c textfile noimage.ogg My problem is taking something like a jpeg and converting it to base64. Currently I have: base64 --wrap=0 ./image.jpg Which gives me the image file converted to base64, using vorbiscomment and following the tagging rules, I can embed that into an ogg file like so: echo "METADATA_BLOCK_PICTURE=$(base64 --wrap=0 ./image.jpg)" > ./folder.txt vorbiscomment -c textfile noimage.ogg However this gives me an ogg whose image does not work properly. I noticed when comparing the base64 strings that all properly embedding pictures have a header line but all the base64 strings I generate are lacking this header. Further analysis of the header: od -c header.txt 0000000 \0 \0 \0 003 \0 \0 \0 \n i m a g e / j p 0000020 e g \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000040 \0 \0 \0 \0 \0 \0 \0 \0 035 332 0000052 Which follows the spec given above. Notice 003 corresponds to front cover and image/jpeg is the mime type. So finally, my question is, how can I base64 encode a file and generate this header along with it for embedding into an ogg file?

  Read the article

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• iTunes Home Sharing only works one way between 2 WinXP PC's on the same LAN

  - by scunliffe

  Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

  Read the article

• Memory leak in Google Chrome

  - by jasondavis

  As a developer it is very common for me to have 2-3 different IDE's open, 10-15 google chrome windows which can hold up to 200 open tabs (I know I get out of hand some times), Photoshop, couple twitter bots for promo, and a few other programs but my system still runs fast and smooth. I have an i7 processor with 12gb ram. Now with all my usual stuff running my Physical memory is usually running around 50-60% however over the course of the day or much less even, I will gradually grow to 98% The highest Memory usage processes will be from Google Chrome, if I sort in the task manager by highest memory usage and end the 1 highest process which will be a google chrome one, my memory usage will jump back down to about 60%. Also by ending that 1 process, all my Chrome windows will remain open and in use, so it doesn't affect me at all by ending that process. Based on this research I am assuming that that 1 runaway process is likely the Adobe Flash as I also can say that it gets up to the 98% much faster when I am using flash items like video or music player. But even without using any of them it will still climb up to that high number eventually. Has anyone else experienced similar results?

  Read the article

• How many users can be in a AD LDS group?

  - by ixe013

  Microsoft published the recommended maximum limits for users in an Active Directory group. It basically says : Starting with Windows Server 2003, the ability to replicate discrete changes to linked multivalued properties was introduced as a technology called Linked Value Replication (LVR). and This allows the number of group memberships to exceed the former recommended limit of 5,000 for Windows 2000 or Windows Server 2003 at a forest functional level of Windows 2000. Given the replication meta data below, can anybody tell me what is the maximum number of users a AD-LDS group can hold ? Getting 'CN=Member,CN=Schema,CN=Configuration,CN={67B333FE-ADB4-430D-AAEE-D4CCE4B98A2E}' metadata... 23 entries. AttID Ver Loc.USN Originating DSA Org.USN Org.Time/Date ===== === ======= =============== ======= ============= 0 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 3 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 20001 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 20002 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 2001e 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 20020 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 20021 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 20032 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 200a9 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 200c2 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 200da 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 200e2 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 200e7 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 20119 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 2014e 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 201cc 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 90001 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 90094 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 90095 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 900aa 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 90177 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 9027f 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49 9030e 1 95 8ba30efb-9aa4-4e55-8f7c-268e3dcc536b 95 2012-07-17 14:25:49

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• How can I stream audio signals from various devices/computers to my home server?

  - by Breakthrough

  I currently have a headless home server set up (running Ubuntu 12.04 server edition) running a simple Apache HTTP server. The server is near an audio receiver, which controls a set of indoor and outdoor speakers in my home. Recently, my father purchased a Bluetooth adapter, which our various laptops and cellphones can connect to, outputting the music to the speakers. I was hoping to find a solution that worked over Wi-Fi, namely because it won't cost anything (I already have a server with an audio card), and it doesn't depend on Bluetooth. Is there any cross-platform (preferably free and open-source) solution that I can use which will allow me to stream audio to my home server, over my home network, from a wide variety of devices (laptops running Windows/Linux or cellphones running Android/BB/iOS)? I need something that works at least with Windows and Android. Also, just to clairfy, I want something that simply allows devices to connect to my server and output an audio signal without any action on the server end (since it's a server hidden away near my receiver). Any subsequent connection attempt should be dropped, so only one device can be in control of the stereo at once.

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• Using multiple computers effectively

  - by Benjamin Oakes

  I have some extra (old) Macs and PCs around the house and a MacBook that's sometimes overworked. I'm looking for tips on using multiple computers effectively. Basically, I'd like to add to the following list. Here's what I'm using so far: Teleport: lets you use a single mouse and keyboard to control several Macs, like Synergy Built-in file sharing: lets me run programs on another Mac, but only maintain one copy of the data Bazaar: distributed version control Mail.app, Thunderbird, etc.: IMAP for my mail accounts TuneConnect: control iTunes on another Mac with a nice interface, using the library on my MacBook (if I choose it by pressing option at startup) over file sharing OmniFocus: syncs across computers pretty seamlessly Web browsing across computers VNC/Remote Desktop Running X-windows programs using ssh -Y hostname for headless operation (but they die when I sleep the connecting computer -- something like GNU screen would be ideal) Plain-old ssh with GNU screen Really, a better idea of what I do might be necessary. Generally though, I'd like to distribute tasks across more than one computer when possible, but not have much overhead in doing so. The perfect solution? An Xgrid-like program that pushes processing across multiple computers automatically and seamlessly (although that seems unlikely). Here's what I have, in case it makes a difference: MacBook (Dual 2.16 GHz, OS X 10.6.3) eMac (1.25 GHz, OS X 10.4.11, soon to be 10.5) Dell Dimension (800 MHz, some version of Ubuntu) -- no dedicated monitor PowerMac G3 (400 MHz, OS X 10.4.11) -- no dedicated monitor iMac G3 DV (400 MHz, OS X 10.4.11) -- currently in the kitchen for recipes, email, web browsing, music, movies (DVDs), etc. (Total, they cost me around $650, mostly for the MacBook. Freecycle is wonderful, just in case you haven't heard of it.) I'm really only using the MacBook and eMac at this point, but I'd like to push more onto it and possibly the PowerMac and Dell.

  Read the article

• email dropbox between two mutually untrusted sites

  - by user52874

  I've an interesting problem that I thought was straightforward, but turns out I think I'm whistling down the wrong path. It has to do with (shudder) email. I thought I was done with needing to know about email guts ten years ago; I was wrong. Anyway. Simply put, I need to figure out how to relay outgoing email that is not targetted in our domain from our domain into a 'dropbox' in a DMZ, and the Other Guys can retrieve that email from their side of the DMZ and distribute it accordingly, even out to the public internet if need be. There will be no [un-established] traffic coming back to Our side from anywhere; any attempts to do so are dropped with malicious prejudice. Our side is postfix running on scilinux6.1. The DMZ boxes are redhat5.4. The Other Guys are M$ Exchange. The firewalls are set up such that data can go from Our Side downsec to the DMZ, but not upsec from the DMZ into Our Side. Same for the Other Guys. My first thinking was simply to set up postfix on a box in the DMZ and tell them to set up fetchmail or whatever the M$ equivalent is, but then I started remembering that postfix wants to actively relay email onwards, rather than hold it and wait for someone to 'reach in' and retrieve it. I'm not sure I've explained this well, but hopefully it's clear enough that someone can point me in the right direction. I seem to remember having done this before, but it was a looong time ago. thanks!

  Read the article

• Unusual Caching Issue with IE 7/8 and IIS 7

  - by Daniel A. White

  We recently moved a site into production running Server 2008 x64 and IIS 7. The ASP.NET pages apparently load just fine, but when it comes to IE 7 and 8, a weird caching issue has cropped up with the CSS and JavaScript files on the page. On a very sporadic schedule, IE does not get all the files necessary to compose the page (i.e. CSS and JS files). When I manually go to the missing files from the address bar, they come back from local cache as empty. I F5 these source files and magically they come down properly. I refresh the site after loading a few files and the cache seems to hold. This problem has only been reproduced (again, sporadically) on IE 7 and 8 running XP. Chrome and Firefox appear to be immune. We have set IIS to use server-side kernel caching for CSS, JS and images. We also have set to expire content for the App_Themes and Scripts directories to expire immediately. One initial thought it was a SWF loading an FLV on page load. These fixes have not remedied the problem. We had no problems on our staging server which is using Server 2003 and IIS 6. Any ideas would be greatly appreciated. P.S. It sounds similar to this problem: but we do have the Static Content module installed. http://serverfault.com/questions/115099/iis-content-length-0-for-css-javascript-and-images

  Read the article

• Postfix: change sender in queued messages

  - by ring0

  Following a complete re-installation we got a problem with the configuration: the sender address was wrong and some recipients (mail servers) rejected them. So there is a bunch of mails stuck in the Postfix queue. Ideally, a change of the sender address directly in the queued mails, and then flushing the queue would be optimal. I tried this answer that addresses this very problem. But messages don't seem to be easily modifiable in the version I have (2.11.0). For instance there is no /var/spool/mqueue dir, but, instead, /var/spool/postfix/... active bounce corrupt defer deferred dev etc flush hold incoming lib maildrop pid private public saved trace usr and the dir of interest is deferred. I tried to modify a few files there changing the wrong domain with the correct one (and was careful to ensure only those were changed). But then, those mails were moved to corrupt, meaning that a simple text change doesn't seem to work (done with vi). Any other cleaner way to change the sender in queued mails?

  Read the article

• Can't find disk usage in one directory

  - by Xster

  Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

  Read the article

• Lag in Windows 7 with Zepto Znote 6224W

  - by Xink64

  Hi! Why does my Zepto Znote 6224W Laptop with Windows 7 make these small laggy moves whenever I use it? First I installed Windows 7 64 bit because of the memorycap in Windows 7 32 bit, but soon I realized that the system was lagging randomly. It was very annoying whenever I listened to music, because of the sudden lags. Then I tried everything with drivers; Chipset, Soundcard, Graphicscard, and so on. No luck. I then installed Windows 7 32 bit and this reduced the amount of lags but they are still here. I haven't tried bios upgrade since my bios should be newest according to now the now bankrupt Zepto company. My specifications: Zepto Znote 6224W Intel T8300 Intel Chipset PM965 PC-5300 4gb Nvidia 8600M GT Zepto's rebranded bios: Phoenix Technologies LTD Z14ND06 - Date: 12/20/2007 Harddrive: 320 GB 5400 RPM which I replaced with a Kingston SSDnow 40 GB. No luck either. I haven't tried Windows Vista on the machine though, but I would like to keep Windows 7.

  Read the article

• How to compare old CPU to new CPU?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• How Could My Website Be Hacked

  - by Kiewic

  Hi! I wonder how this could happen. Someone delete my index.php files from all my domains and puts his own index.php files with the next message: Hacked by Z4i0n - Fatal Error - 2009 [Fatal Error Group Br] Site desfigurado por Z4i0n Somos: Elemento_pcx - s4r4d0 - Z4i0n - Belive Gr33tz: W4n73d - M4v3rick - Observing - MLK - l3nd4 - Soul_Fly 2009 My domain has many subdomains, but only the subdomains that can be accessed with an specific user were hacked, the rest weren't affected. I assumed that someone entered through SSH, because some of these subdomains are empty and Google doesn't know about them. But I checked the access log using the last command, but this didn't show any activity through SSH or FTP the day of the attack neither seven days before. Does anybody has an idea? I already changed my passwords. What do you recommend me to do? UPDATE My website is hosted at Dreamhost. I suppose they have the latest patches installed. But, while I was looking how they entered to my server, I found weird things. In one of my subdomains, there were many scripts for execute commands on the server, upload files, send mass emails and display compromising information. These files had been created since last December!! I have deleted those files and I'm looking for more malicious files. Maybe the security hold is an old and forgotten PHP application. This application has a file upload form protected by a password system based on sessions. One of the malicious scripts was in the uploads directory. This doesn't seem like an SQL Injection attack. Thanks for your help.

  Read the article

• CopSSH SFTP -- limit users access to their home directory only

  - by bradvido

  Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• IIS 6 ASP.NET default handler-mappings and virtual directories

  - by mlauter

  I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >