Search Results

Search found 8391 results on 336 pages for 'partial hash arguments'.

Page 181/336 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • Why do you hate Java? Is it the language or the framework? [closed]

    - by zneak
    According to you all, Java is the third most-hated language here. The two other most hated languages are PHP and VBScript. (It's quite funny how they stand together on the podium.) I'd like to make it known that the question mostly addresses people who don't like Java. I assume here a number of subjective opinions as facts because they're usually considered true among people who don't like Java, and I don't want to be convinced otherwise here. If you're a Java enthusiast, you might find this question frustrating. It's never been made clear if people hate Java itself, or if they hate it because of the framework, or if it's a mixture of the two. On a side you have the language, where you have: the "everything should be an object" philosophy, even in instances where it should obviously be something else (event handlers I'm pointing you); checked exceptions; the idea that all logic should be presented as methods and properties is a big no-no; the fact that "closures" created by anonymous types only include final variables and arguments, but will allow write access to any member of the parent class; a few more. On the other side, you have the JDK, with... its load of inconsistencies and overengineering; monolithic class hierarchies; meaningless base exceptions like IOException (though other frameworks have similar exception hierarchies); sluggish responsiveness even with Swing; a few more. My question is, do you think that, if either one (Java or the JDK) was taken alone, and the other was dropped in favor of something else, the new combination would be better? For instance, if you could use the C# syntax with the JDK (adapting get*/set* methods into properties, and interfaces with only one method into delegates), or the Java syntax with the .NET Framework (doing the inverse transformations), would things get better in your opinion?

    Read the article

  • PCI-e SEALEVEL dual serial card not recognized on Ubuntu 14.04

    - by kwhunter
    New to Ubuntu, running 14.04. I have trouble with the serial port setup, I have a plug-in PCI-e SEALEVEL dual serial card that is not recognized. user1@WSIWORKSTATION2:~$ dmesg | grep tty [ 0.000000] console [tty0] enabled [ 1.577197] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.943326] tty ttyprintk: hash matches [ 17.240880] ttyS4: LSR safety check engaged! [ 17.241589] ttyS4: LSR safety check engaged! [ 17.242354] ttyS5: LSR safety check engaged! [ 17.243058] ttyS5: LSR safety check engaged! [ 17.243918] ttyS6: LSR safety check engaged! [ 17.244485] ttyS6: LSR safety check engaged! [ 17.245195] ttyS7: LSR safety check engaged! [ 17.245830] ttyS7: LSR safety check engaged! [ 17.246554] ttyS8: LSR safety check engaged! [ 17.247191] ttyS8: LSR safety check engaged! user1@WSIWORKSTATION2:~/Desktop/seacom$ lspci -d 135e: -vvv 02:04.0 Bridge: Sealevel Systems Inc Device e205 (rev aa) Subsystem: Sealevel Systems Inc Device e205 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- SERR- Capabilities: However, the manufacturer's drivers won't install: 1. user1@WSIWORKSTATION2:~/Desktop/seacom$ make install ---------------------------------------------------------------- Installing seacom suite. ---------------------------------------------------------------- --Installing utilities-- /usr/bin/ld: skipping incompatible ../../lib/libftd2xx.a when searching for -lftd2xx /usr/bin/ld: cannot find -lftd2xx collect2: error: ld returned 1 exit status make[2]: *** [setusb] Error 1 make[1]: *** [install] Error 1 make: *** [install] Error 1 2. user1@WSIWORKSTATION2:~/Desktop/seaio$ make install ---------------------------------------------------------------- Installing SD suite. ---------------------------------------------------------------- *Compiling SeaIO Library source file: digitalIoDevice.cpp gcc: error trying to exec 'cc1plus': execvp: No such file or directory make[1]: *** [digitalIoDevice.o] Error 1 make: *** [install] Error 1 I was not able to find a solution, so if anyone can help it will be much appreciated. PS Have some troubles with formatting my post, apologies...

    Read the article

  • Suggestions for a CMS markup language for PHP

    - by Yanick Rochon
    As a learning experience, and as project, I am attempting to write a CMS module for ZF2. One of the functionality I would like to have is the possibility of adding dynamic contents in the pages by calling PHP functions in the view scripts. However, I do not want to give the users freedom in writing PHP code directly inside the page content, but rather implement custom view helpers (or widgets) to handle logic. For example: calling partial, partialLoop, url, etc. specifying arguments and all. I liked the idea of extending Markdown but this would get complicated when trying to add custom CSS class to elements, etc. Then I had the idea of simply doing a preg_replace on some patterns. For example, the string : ### partialLoop:['partials/display.phtml',[{id:'p1',price:4.99},{id:'p2',price:12.34}]] ### would be replaced by <?php echo $this->partialLoop('partials/display.phtml', array(array('id'=>'p1','price'=>4.99),array('id'=>'p2','price'=>12.34))) ?> Obviously, there would be some caching done so the page content is not rendered everytime. Does this sound good? If not, what would be a good way of doing this? Or is there a project already being developed for doing this? (I'd like to avoid heavy third party libs and something fairly or fully compatible with ZF2 would be nice.) Thanks.

    Read the article

  • CodePlex Daily Summary for Thursday, August 14, 2014

    CodePlex Daily Summary for Thursday, August 14, 2014Popular ReleasesWordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.Awake: Awake v1.4.0 (Stand-Alone-Exe): Awake is a tool, that resides in system tray and prevents the computer from entering the idle state, thus successfully preventing it from entering sleep/hibernation/the lock screen. It does not change any system settings, therefore it does not require administrative privileges. This tool is designed for those who cannot change the timings in their power settings, because of some corporate policy.Node.js Tools for Visual Studio: Latest dev build: An intermediate release with the latest changes and bug fixes.HP OneView PowerShell Library: HP OneView PowerShell Library 1.10.1193: Branch to HP OneView 1.10 Release. NOTE: This library version does not support older appliance versions. Fixed New-HPOVProfile to check for Firmware and BIOS management for supported platforms. Would erroneously error when neither -firmware or -bios were passed. Fixed Remove-HPOV* cmdlets which did not handle -force switch parameter correctly Fixed New-HPOVUplinkSet and New-HPOVNetwork Fixed Download-File where HTTP stream compression was not handled, resulting in incorrectly writt...Linq 4 Javascript: Version 2.3: Minor Changes Made In Queryable - don't check for collection length with >=. Use === (In The Next Method) TypeScript Change Only - Remove collection source and other inherit properties from all the chainables. Also in typescript add private - public to all properties. This should cleanup the typescript namespace a bit TypeScript Change Only - Change return type of ToDictionary to TKey, T instead of T, TKey Changed the unit test to Typescript so I can test how the caller experience is in...NeoLua (Lua for .net dynamic language runtime): NeoLua-0.8.17: Fix: table.insert Fix: table auto convert Fix: Runtime-functions were defined as private it should be internal. Fix: min,max MichaelSenko release.Azure Maching Learning Excel Add-In: Beta: Download the zip file and extract into your local directory. Then watch the video tutorials for installation steps.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeOooPlayer: 1.1: Added: Support for speex, TAK and OptimFrog files Added: An option to not to load cover art Added: Smaller package size Fixed: Unable to drag&drop audio files to playlist Updated: FLAC, WacPack and Opus playback libraries Updated: ID3v1 and ID3v2 tag librariesEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...Python Tools for Visual Studio: 2.1 RC: Release notes for PTVS 2.1 RC We’re pleased to announce the release candidate for Python Tools for Visual Studio 2.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, editing, IntelliSense, interactive debugging, profiling, Microsoft Azure, IPython, and cross-platform debugging support. PTVS 2.1 RC is available for: Visual Studio Expre...Sense/Net ECM - Enterprise CMS: SenseNet 6.3.1 Community Edition: Sense/Net 6.3.1 Community EditionSense/Net 6.3.1 is an important step toward a more modular infrastructure, robustness and maintainability. With this release we finally introduce a packaging and a task management framework, and the Image Editor that will surely make the job of content editors more fun. Please review the changes and new features since Sense/Net 6.3 and give a feedback on our forum! Main new featuresSnAdmin (packaging framework) Task Management Image Editor OData REST A...Aspose for Apache POI: Missing Features of Apache POI SS - v 1.2: Release contain the Missing Features in Apache POI SS SDK in comparison with Aspose.Cells What's New ? Following Examples: Create Pivot Charts Detect Merged Cells Sort Data Printing Workbooks Feedback and Suggestions Many more examples are available at Aspose Docs. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.MFCBDAINF: MFCBDAINF: Added recognition of TBS, Hauppauge, DVBWorld and FireDTV proprietary GUID'sFluffy: Fluffy 0.3.35.4: Change log: Text editorSKGL - Serial Key Generating Library: SKGL Extension Methods 4 (1.0.5.1): This library contains methods for: Time change check (make sure the time has not been changed on the client computer) Key Validation (this will use http://serialkeymanager.com/ to validate keys against the database) Key Activation (this will, depending on the settings, activate a key with a specific machine code) Key Activation Trial (allows you to update a key if it is a trial key) Get Machine Code (calculates a machine code given any hash function) Get Eight Byte Hash (returns an...Touchmote: Touchmote 1.0 beta 13: Changes Less GPU usage Works together with other Xbox 360 controls Bug fixesModern UI for WPF: Modern UI 1.0.6: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE LinkGroup.GroupName renamed to GroupKey NEW FEATURES Improved rendering on high DPI screens, including support for per-monitor DPI awareness available in Windows 8.1 (see also Per-monitor DPI awareness) New ModernProgressRing control with 8 builtin styles New LinkCommands.NavigateLink routed command New Visual Studio project templates 'Modern UI WPF App' and 'Modern UI W...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Multiple thread safe improvements including AdjustToContents XLHelper XLColor_Static IntergerExtensions.ToStringLookup Exception now thrown when saving a workbook with no sheets, instead of creating a corrupt workbook Fix for hyperlinks with non-ASCII Characters Added basic workbook protection Fix for error thrown, when a spreadsheet contained comments and images Fix to Trim function Fix Invalid operation Exception thrown when the formula functions MAX, MIN, and AVG referenc...SEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...New ProjectsAndroid PCM Audio Recording: Android PCM Audio Recording The source code records the PCM audio in android device.Azure Maching Learning Excel Add-In: The Azure ML Excel Add-In enables you to interact with Microsoft Azure Machine Learning WebServices through excel by adding the scoring endpoint as a function.bitboxx bbcontact: The bitboxx bbcontact module is a DNN module for providing a simple configurable contact form with easy setup and email notificationJD eSurvey Java Open Source Online Survey Application: JD eSurvey is an open source enterprise survey web application written in Java and based on the Spring Framework and Hibernate ORM developed by JD Software.Kobayashi Royale: A tactical space combat turn based game.OneApp Framework: Framework for building true cross platform application.Raspberry Pi Control Center: A GTK+ based Raspberry Pi Control Center. Made to be simple and fastSharePoint Farm's Logs Collector: Get Farm Logs from a centralized place. Sonar Snitch: Ferramenta para filtrar e monitorar aplicações no Sonar. Indica o quanto cada aplicação foi alterada em uma série de indicadores conhecidos.

    Read the article

  • links for 2011-03-07

    - by Bob Rhubart
    DON CIO News: DON CIO Discusses Future IT Initiatives Audio links and a little background information on a recent town hall meetings hosted by Department of the Navy Chief Information Officer Terry Halvorsen. (tags: usgov usnavy cio enterprisearchitecture) Strassmann's Blog: Why So Many Data Centers? "The idea of datacenter consolidation involves much more that applying simple technical solutions." - Paul Strassmann (tags: enterprisearchitecture datacenter consolidation) Satyajith Nair: Coherence - The next big thing for the cloud!! "Disk-based computing is fraught with performance and management issues and doing away with Disks though not practical now, maybe true in the future. This also calls for a re-think of our current application architecture which is so focussed on disk-based persistence." - Satyajith Nair (tags: oracle infosys coherence grid cloud) TechCast: GlassFish Server and WebLogic - Interoperability and Integration - Oracle media - developer Fusion VP Development Anil Gaur and Product Manager Adam Leftik explain Oracle&#39;s strategy for creating increasing integration between GlassFish Server and Oracle WebLogic Server with an overview of new features and functionality for developers in GlassFish 3.1. (tags: ping.fm) Oracle Fusion and Oracle Fusion Applications : Overview | OracleApps Epicenter So WHAT IS ORACLE FUSION? People often get confuse with this term .To start with, it will be a good idea to know the difference between Fusion (tags: ping.fm) Marc Kelderman: OSB: Automatic update of Service Acounts Solution architect Marc Kelderman shares a work-around for using different Service Accounts for multiple environments. (tags: oracle otn sca bpel soa bpm servicebus) Perfect Integration 1 - Architectural Approach "First post in a series of 5-10, I will release all my views and opinions on the Art of Integration. I challenge you to disagree, and bash me with arguments and reasoning." -- Martijn Linssen (tags: enterprisearchitecture integration) Edwin Biemond: Set the Initial Focus on a component in a Page or a Fragment Edwin says: "This is not so hard to do, but sometimes it can be tricky to find the id of a component when you use regions ( Bounded Task Flows )." (tags: oracle otn oracleace java soa) Oracle Linux and Oracle Virtualization at Collaborate 2011 Information on more than 200 Oracle-hosted sessions with the latest insights and guidance from Oracle executives, product managers, and developers. (tags: oracle virtualization linux ioug oaug)

    Read the article

  • Start Debugging in Visual Studio

    - by Daniel Moth
    Every developer is familiar with hitting F5 and debugging their application, which starts their app with the Visual Studio debugger attached from the start (instead of attaching later). This is one way to achieve step 1 of the Live Debugging process. Hitting F5, F11, Ctrl+F10 and the other ways to start the process under the debugger is covered in this MSDN "How To". The way you configure the debugging experience, before you hit F5, is by selecting the "Project" and then the "Properties" menu (Alt+F7 on my keyboard bindings). Dependent on your project type there are different options, but if you browse to the Debug (or Debugging) node in the properties page you'll have a way to select local or remote machine debugging, what debug engines to use, command line arguments to use during debugging etc. Currently the .NET and C++ project systems are different, but one would hope that one day they would be unified to use the same mechanism and UI (I don't work on that product team so I have no knowledge of whether that is a goal or if it will ever happen). Personally I like the C++ one better, here is what it looks like (and it is described on this MSDN page): If you were following along in the "Attach to Process" blog post, the equivalent to the "Select Code Type" dialog is the "Debugger Type" dropdown: that is how you change the debug engine. Some of the debugger properties options appear on the standard toolbar in VS. With Visual Studio 11, the Debug Type option has been added to the toolbar If you don't see that in your installation, customize the toolbar to show it - VS 11 tends to be conservative in what you see by default, especially for the non-C++ Visual Studio profiles. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Android device - C++ OpenGL 2: eglCreateWindowSurface invalid

    - by ThreaderSlash
    I am trying to debug and run OGLES on Native C++ in my Android device in order to implement a native 3D game for mobile smart phones. The point is that I got an error and see no reason for that. Here is the line from the code that the debugger complains: mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); And this is the error message: Invalid arguments ' Candidates are: void * eglCreateWindowSurface(void *, void *, unsigned long int, const int *) ' --x-- Here is the declaration: android_app* mApplication; EGLDisplay mDisplay; EGLint lFormat, lNumConfigs, lErrorResult; EGLConfig lConfig; // Defines display requirements. 16bits mode here. const EGLint lAttributes[] = { EGL_RENDERABLE_TYPE, EGL_OPENGL_ES2_BIT, EGL_BLUE_SIZE, 5, EGL_GREEN_SIZE, 6, EGL_RED_SIZE, 5, EGL_SURFACE_TYPE, EGL_WINDOW_BIT, EGL_RENDER_BUFFER, EGL_BACK_BUFFER, EGL_NONE }; // Retrieves a display connection and initializes it. packt_Log_debug("Connecting to the display."); mDisplay = eglGetDisplay(EGL_DEFAULT_DISPLAY); if (mDisplay == EGL_NO_DISPLAY) goto ERROR; if (!eglInitialize(mDisplay, NULL, NULL)) goto ERROR; // Selects the first OpenGL configuration found. packt_Log_debug("Selecting a display config."); if(!eglChooseConfig(mDisplay, lAttributes, &lConfig, 1, &lNumConfigs) || (lNumConfigs <= 0)) goto ERROR; // Reconfigures the Android window with the EGL format. packt_Log_debug("Configuring window format."); if (!eglGetConfigAttrib(mDisplay, lConfig, EGL_NATIVE_VISUAL_ID, &lFormat)) goto ERROR; ANativeWindow_setBuffersGeometry(mApplication->window, 0, 0, lFormat); // Creates the display surface. packt_Log_debug("Initializing the display."); mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); --x-- Hope someone here can shed some light on it.

    Read the article

  • Strategy for restoring state via URL in web apps

    - by JW01
    This is a question about modern web apps, where a single page is loaded, and all subsequent navigation is done by XHR calls and modifying the DOM. We can use libraries that manipulate the hash string, which let us navigate by URL and support the back/forward buttons. But to use those libraries, we need to be able to move the UI from any one state to any other. Is there a good strategy for moving between UI states, that also allows them to be restored from scratch when you load a new URL? In a complex app, you might have a lot of different states. You don't want to reload the entire UI each time you change states. But you also don't want to require separate methods for moving from every state to each every state. Typically we need to: Restore a state from scratch, when you enter a new URL or hit Reload. Move from one state to another, when you use the Back/Forward buttons. Move from one state to another, when you perform an action within your app (like clicking a link). Move to certain states that shouldn't be added to the history, like ones that appear after form submissions. Move to some states that are built on the previous state, like a drill-down list. When you perform actions within your app, there's the additional question of which comes first: Do you change the URL, listen for the URL change, and change your state in response to it? Or do you change your state, then change the URL, but don't do anything in response? Does anyone have some experience to share on this topic?

    Read the article

  • Security in a private web service

    - by Oni
    I am developing a web site and a web service for a small on-line game. Technically, I'll be using Express (node.js) and MongoDB+Redis for the databases. This the structure I came up with: One Express server that will server as the Web Service. This will connect to the databases. One Express server that will provide the web site. It will connect to the Web Service to retrieve and push the information. iOS and Android application will be able to interact with the WebService. Taking into account: It is a small game. The information transferred is not critical. There will NOT be third party applications. At least for the moment. My concern is about which level of security I should use in each of the scenarios: Security of the user playing through web browser Security of the applications and the Web Server connecting to the WS. I have take a look at the different options and: OAuth and/or Https is too much for this scenario, isn't it? Will be a good option to hash the user and password with MD5(or similar) and some salt? I would like to get some directions and investigate by my own rather than getting a response like "you should you use this node.js module..." Thanks in advance,

    Read the article

  • CodePlex Daily Summary for Wednesday, June 04, 2014

    CodePlex Daily Summary for Wednesday, June 04, 2014Popular ReleasesSEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedcsv2xlsx: Source code: Source code of applicationHigLabo: HigLabo_20140603: Bug fix of MimeParser for nested MimeContent parsing.Family Tree Analyzer: Version 4.0.0.0-beta2: This major release introduces a significant new feature the ability to search the UK Ordnance Survey 50k Gazetteer for small placenames that often don't appear on a modern Google Map. This means significant numbers of locations that were previously not found by Google Geocoding will now be found by using OS Geocoding. In addition I've added support for loading the Scottish 1930 Parish boundary maps, whilst slightly different from the parish boundaries in use in the 1800s that are familiar to...TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegSSIS Multiple Hash: Multiple Hash 1.6.2.3: Release Notes This release is an SQL 2014 fix release. It addresses the following: The 1.6.1.2 release's SQL 2014 installer didn't work for SQL 2014 RTM. The x64 installer also showed x86 for both x64 and x86 in SQL 2014. Please download the x64 of x32 file based on the bitness of your SQL Server installation. BIDS or SSDT/BI ONLY INSTALLS ARE NOT DETECTED. You MUST use the Custom install, to install when the popup is shown, and select which versions of SQL Server are available. A war...QuickMon: Version 3.14 (Pie release): This is unofficially the 'Pie' release. There are two big changes.1. 'Presets' - basically templates. Future releases might build on this to allow users to add more presets. 2. MSI Installer now allows you to choose components (in case you don't want all collectors etc.). This means you don't have to download separate components anymore (AllAgents.zip still included in case you want to use them separately) Some other changes:1. Add/changed default file extension for monitor packs to *.qmp (...VeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Keepass2Android: 0.9.4-pre1: added plug-in support: See settings for how to get plug-ins! published QR plug-in (scan passwords, display passwords as QR code, transfer entries to other KP2A devices) published InputStick plugin (transfer credentials to your PC via bluetooth - requires InputStick USB stick) Third party apps can now simply implement querying KP2A for credentials. Are you a developer? Please add this to your app if suitable! added TOTP support (compatible with KeeOTP and TrayTotp) app should no l...The IRIS Toolbox Project: IRIS Reference Manual Release 20140602: Reference Manual for Release 20140602.Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...SoundCloud Downloader: SC Downloader V1.0: Newest release Requirements .NET Framework 4.0/4.5 Changes since releasing the source Replaced ProgressBar and Buttons with the ones i created from scratch, you may use the .dll files on your own risk. Changed the authentication mode to Windows NOTE! When extracted, execute setup.exe to launch the installer! NOTE! ENJOY!VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksNew Projects2112110148: 2112110148 Kieu Thi Phuong AnhAutoHelp: Inspired by Docy, AutoHelp exposes XML documentation embedded in sources code. a MVC 5 / typescripted connected on Webapi, AutoHelp is a modern HTML 5 appFeedbackata: An exercise in interactive development.Ideaa: A place to get inspired and find ideas about a topic you are interested inImpression Studio - Free presentation Maker Tool: Impression Studio is a free presentation maker tool based on impress.js library. It aims to be free alternative to prezi. This tool is under heavy development.LavaMite: LavaMite is a program that aims to capture the random wax formations that arise in a lava lamp before it is bubbling freely.Load Runner - HTTP Pressure Test Tool: A Lightweight HTTP pressure test tool supports multi methods / content type / requests, written in C# 4.0.Microsoft Research Software Radio SDK: Microsoft Research Software Radio SDKMsp: MspPower Torrent: Windows PowerShell module enabling BitTorrent (R) functionalities.

    Read the article

  • Programming by dictation?

    - by Andrew M
    ie. you speak out the code, and someone else across the room types it in Anyone tried this? Obviously the person taking the dictation would need to be a coder too, so you didn't have to explain everything and go into tedious detail (not 'open bracket, new line...' but more like 'create a new class called myParser that takes three arguments, first one is...'). I thought of it because sometimes I'm too easily distracted at my computer. Surrounded by buttons, instant gratification a click away, the world at my fingertips. To get stuff done, I want to get away, write my code on paper. But that would mean losing access to necessary resources, and necessitate tedious typing-up later on. The solution? Dictate. Pros: no chance to check reddit, stackexchange, gmail, etc. code while you pace the room, lie down, play billiards, whatever train your brain to think more abstractedly (have to visualize things if you can't just see the screen) skip the tedious details (closing brackets etc.) the typist gets to shadow a more experienced programmer and learn how they work the typist can provide assistance/suggestions external pressure of typist expecting instructions, urging you to stay focussed Cons might be too hard might not work any better rather inefficient use of assisting programmer need to find/pay someone to do this

    Read the article

  • Is a Model Driven Architecture in Language Oriented Programming (MPS) feasible at this time

    - by Steven Jeuris
    As a side project I am developing some sort of DSL where I describe a data model, and generate desired code files from it. I believe this is called Model Driven Architecture. My partial existing implementation uses C#, CodeDOM, XML and XSLT to do this manually. I discovered there already exist better environments to do this in. The one which fascinated me the most is called MPS, which follows the Language Oriented Programming paradigm. This article, written by a cofounder of JetBrains was a real eye opener for me. I truly believe LOP has a very good chance of becoming the next big programming paradigm once it has broader support. From my short experience with MPS, I noticed it is still mainly Java-oriented. My question is, how feasible is it to generate code files for other (multiple) languages instead of just Java. I don't need full language support from the start, so preferably, I need to be able to implement a language in a agile way. E.g. first support only one type, add access modifiers, ... Perhaps some other (free) environment already provides this out of the box. P.S.: I find it important to have a lot of control over the naming conventions and such of the generated code. This is one of the reasons why I started my own implementation.

    Read the article

  • links for 2011-01-07

    - by Bob Rhubart
    Enterprise Software Development with Java: GlassFish 3 vs. JBoss 6 - Is the Web Profile ready for the Enterprise? (tags: ping.fm) Bay Area Coherence Special Interest Group (BACSIG) Jan 20 The Jan 20 meeting of the Bay Area Coherence Special Interest Group (BACSIG) features presentations by Rob Lee (Coherence 3.6 Clustering Features), Rao Bhethanabotla (Efficient Management and Update of Coherence Clusters to Reduce Down Time), and Christer Fahlgren (How To Build a Coherence Practice). (tags: oracle otn coherence sig) Michael T. Dinh: VirtualBox Command Line "I have manually configured VirtualBox Host-Only Ethernet Adapter for static IP. However, the IP can change after reboot which affects connectivity with the Guest with static IP." - Michael T. Dinh (tags: oracle virtualization virtualbox) Michel Schildmeijer: Oracle WebLogic - Configuring DyeInjection Monitor "A fairly unknown tool within WLDF (WebLogic Diagnostic Framework) is the DyeInjection Monitor. With this monitor configured one can track a  user or client address within a WebLogic system." - Michel Schildmeijer (tags: oracle weblogic) David Butler: Master Data Management Implementation Styles "Oracle MDM Solutions provide strong data federation and integration capabilities which are key to enabling the use of the Confederated Hub as a possible architectural style approach." - David Butler (tags: oracle otn softwarearchitecture) Kenneth Downs: Can You Really Create A Business Logic Layer? "Don't be afraid to use the database for what it is good for, and leave the arguments about "where everything belongs" to those with too much time on their hands." - Kenneth Downs (tags: businesslogic database softwarearchitecture) IASA Perspectives Magazine - Fall 2010 Fall 2010 edition of International Association of Software Architects (IASA) Perspectives magazine: (tags: softwarearchitecture iasi entarch) Using the DB Adapter in Oracle SOA Suite: returning status information "In this tutorial I will show you an example of how how can implement this within the Oracle SOA Suite (and because the DB Adapter can also be used within the Oracle Service Bus, the principles also apply to implementing it within the OSB)." - Henk Jan van Wijk (tags: oracle otn soa soasuite database) 4th International SOA Symposium + 3rd International Cloud Symposium by Thomas Erl - call for presentations (SOA Partner Community Blog) The International SOA and Cloud Symposium brings together lessons learned and emerging topics from SOA and Cloud projects, practitioners and experts. The two-day conference agenda will be organized into several tracks. (tags: oracle otn soa cloud)

    Read the article

  • Dummy output after upgrade from 12.04 to 12.10, even though sound card is detected

    - by user115441
    So I just recently upgraded my system from Ubuntu 12.04 to 12.10. However, when I booted into 12.10 for the first time, no sound comes out of my speakers. I checked the sound settings and the Dummy Output was the only thing showing up. I used "hwinfo --sound" to check to see if my sound card was actually installed, and it was installed. hwinfo --sound hal.1: read hal dataprocess 2687: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 11: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb._aiKlM91Nt0 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2668 "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" SubVendor: pci 0x107b "Gateway 2000" SubDevice: pci 0x4040 Revision: 0x04 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0x50240000-0x50243fff (rw,non-prefetchable) IRQ: 44 (91 events) Module Alias: "pci:v00008086d00002668sv0000107Bsd00004040bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown I'm not sure what to do here. The only time the sound will actually work is when I boot into my Windows partition and then reboot into Ubuntu. I mean I don't want to have to do that every time I want to use Ubuntu. I would really appreciate any help I can get on here.

    Read the article

  • Security Risks of Unsigned ClickOnce Manifests

    - by Tom Tom
    Using signed manifests in ClickOnce deployments, it is not possible to modify files after the deployment package has been published - installation will fail as hash information in the manifest won't match up with the modified files. I recently stumbled upon a situation where this was problematic - customers need to be able to set things like connection strings in app.config before deploying the software to their users. I got round the problem by un-checking the option to "Sign the ClickOnce manifests" in VS2010 and explicitly excluding the app.config file from the list of files to have hashes generated during the publish process. From a related page on MSDN "Unsigned manifests can simplify development and testing of your application. However, unsigned manifests introduce substantial security risks in a production environment. Only consider using unsigned manifests if your ClickOnce application runs on computers within an intranet that is completely isolated from the internet or other sources of malicious code." In my situation, this isn't an immediate problem - the deployment won't be internet-facing. However, I'm curious to learn what the "substantial security risks" of what I've done would be if it was internet-facing (or if things changed and it needed to be in the future). Thanks in advance!

    Read the article

  • Database Schema Usage

    - by CrazyHorse
    I have a question regarding the appropriate use of SQL Server database schemas and was hoping that some database gurus might be able to offer some guidance around best practice. Just to give a bit of background, my team has recently shrunk to 2 people and we have just been merged with another 6 person team. My team had set up a SQL Server environment running off a desktop backing up to another desktop (and nightly to the network), whilst the new team has a formal SQL Server environment, running on a dedicated server, with backups and maintenance all handled by a dedicated team. So far it's good news for my team. Now to the query. My team designed all our tables to belong to a 3-letter schema name (e.g. User = USR, General = GEN, Account = ACC) which broadly speaking relate to specific applications, although there is a lot of overlap. My new team has come from an Access background and have implemented their tables within dbo with a 3-letter perfix followed by "_tbl" so the examples above would be dbo.USR_tblTableName, dbo.GEN_tblTableName and dbo.ACC_tblTableName. Further to this, neither my old team nor my new team has gone live with their SQL Servers yet (we're both coincidentally migrating away from Access environments) and the new team have said they're willing to consider adopting our approach if we can explain how this would be beneficial. We are not anticipating handling table updates at schema level, as we will be using application-level logins. Also, with regards to the unwieldiness of the 7-character prefix, I'm not overly concerned myself as we're using LINQ almost exclusively so the tables can simply be renamed in the DMBL (although I know that presents some challenges when we update the DBML). So therefore, given that both teams need to be aligned with one another, can anyone offer any convincing arguments either way?

    Read the article

  • VLC package dependencies broken & cannot be resolved

    - by reep0n
    I'm using Ubuntu 12.04 32bit. Today, suddenly some updates had arrived but it wasn't normal update. It said me to partial update. When I have done this, update manager want to remove vlc. I did it. But when I want to install vlc from synaptic package manager, I found broken dependencies there. Now, If I want to install vlc from Software Centre, It pops up: The following packages have unmet dependencies: vlc: Depends: fonts-freefont-ttf but it is not going to be installed Depends: vlc-nox (= 2.0.3+git20121005+r392-0~r42~precise1) but 2.0.3+git20121005+r392-0~r42~precise1 is to be installed Depends: libavcodec-extra-53 (= 4:0.8-1~) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavutil-extra-51 (= 4:0.8-1~) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libc6 (= 2.15) but 2.15-0ubuntu10.2 is to be installed Depends: libfreetype6 (= 2.2.1) but 2.4.8-1ubuntu2 is to be installed Depends: libgcc1 (= 1:4.1.1) but 1:4.6.3-1ubuntu5 is to be installed Depends: libqtcore4 (= 4:4.8.0) but 4:4.8.2+dfsg-2ubuntu1~precise1~ppa1 is to be installed Depends: libqtgui4 (= 4:4.7.0~beta1) but 4:4.8.2+dfsg-2ubuntu1~precise1~ppa1 is to be installed Depends: libstdc++6 (= 4.6) but 4.6.3-1ubuntu5 is to be installed Depends: zlib1g (= 1:1.2.3.3.dfsg) but 1:1.2.3.4.dfsg-3ubuntu4 is to be installed Hey, Now what to do? How to resolve this problem?

    Read the article

  • Xfce gets really confused about session saving, etc

    - by Pointy
    I'm getting a new laptop running with 11.04 Ubuntu. I've got the xfce4 packages all installed, which is something I've had no problems with on any of my other machines. On this new laptop, however, though I can log in and use an xfce session without any problems, logging out of a session is problematic: I click the "Log out" widget from the panel and then "Log out" from its option dialog. Then the thing just sits there, not logging out. Subsequent attempts to open the "Log out" widget fail with an error about the session manager being busy. After maybe a minute or so, it logs out. Though I've got the "Save session" option checked in the log out dialog, xfce just makes a complete hash of the business. It does remember the applications that I had running, but it seems to forget about the window manager (!!) and the workspace configuration. I don't log in/out that often, and generally I don't care much about restarting applications, but the window manager being missing is of course pretty annoying. I like xfce because it's simple and unobtrusive and usually works pretty well. I've never experienced this, and I've got two other machines also running 11.04 with pretty much the same setup (straight Ubuntu install with xfce4 packages added). Is there some good way to diagnose stuff like that? edit — well I nuked my session cache, did an explicit save from the session widget, and now it works. Well, it doesn't save the workspace location for each client and instead opens them all up on the first workspace, but I think that may be because, in the session, xfwm4 is the last thing in the "Client" list, so before it's started all the other clients just pile up in the first (and only) workspace. I'm still curious about how exactly it gets so messed up. I certainly wasn't knowingly attempting anything fancy or unorthodox, though I may have done something fishy inadvertently.

    Read the article

  • ASP.NET ViewState Tips and Tricks #1

    - by João Angelo
    In User Controls or Custom Controls DO NOT use ViewState to store non public properties. Persisting non public properties in ViewState results in loss of functionality if the Page hosting the controls has ViewState disabled since it can no longer reset values of non public properties on page load. Example: public class ExampleControl : WebControl { private const string PublicViewStateKey = "Example_Public"; private const string NonPublicViewStateKey = "Example_NonPublic"; // DO public int Public { get { object o = this.ViewState[PublicViewStateKey]; if (o == null) return default(int); return (int)o; } set { this.ViewState[PublicViewStateKey] = value; } } // DO NOT private int NonPublic { get { object o = this.ViewState[NonPublicViewStateKey]; if (o == null) return default(int); return (int)o; } set { this.ViewState[NonPublicViewStateKey] = value; } } } // Page with ViewState disabled public partial class ExamplePage : Page { protected override void OnLoad(EventArgs e) { base.OnLoad(e); this.Example.Public = 10; // Restore Public value this.Example.NonPublic = 20; // Compile Error! } }

    Read the article

  • 2 year degree plus experience vs 4 year degree

    - by CenterOrbit
    Alright, I have searched around a bit on this site and found two somewhat similar questions: Computer Science Programming Certificate vs. Computer Science Degree? Is it possible/likely to be paid fairly without a college degree? But these do not provide an answer specifically to what I am seeking. I have my 2 year A.A.S. Degree in computer programming, along with a networking certificate from a technical college. I also have been working at a small educational game development company for 3 years now in various positions, but steadily moving up and now as a lead programmer on a few projects. Some of the higher programmers I work with claim that no matter how much experience I develop it still will not mean as much as someone with a 4 year degree. Their argument is that most employers will look over my resume because of the common '4 yr' minimum requirement. I have also heard people state (not as many though) that experience is everything and that an employer would rather have someone that has worked in the field instead of a rookie fresh out of college. I have heard both sides of this argument, but am looking for a general consensus, or more arguments from both sides from the people who have been there, or are there.

    Read the article

  • The Return Of __FILE__ And __LINE__ In .NET 4.5

    - by Alois Kraus
    Good things are hard to kill. One of the most useful predefined compiler macros in C/C++ were __FILE__ and __LINE__ which do expand to the compilation units file name and line number where this value is encountered by the compiler. After 4.5 versions of .NET we are on par with C/C++ again. It is of course not a simple compiler expandable macro it is an attribute but it does serve exactly the same purpose. Now we do get CallerLineNumberAttribute  == __LINE__ CallerFilePathAttribute        == __FILE__ CallerMemberNameAttribute  == __FUNCTION__ (MSVC Extension)   The most important one is CallerMemberNameAttribute which is very useful to implement the INotifyPropertyChanged interface without the need to hard code the name of the property anymore. Now you can simply decorate your change method with the new CallerMemberName attribute and you get the property name as string directly inserted by the C# compiler at compile time.   public string UserName { get { return _userName; } set { _userName=value; RaisePropertyChanged(); // no more RaisePropertyChanged(“UserName”)! } } protected void RaisePropertyChanged([CallerMemberName] string member = "") { var copy = PropertyChanged; if(copy != null) { copy(new PropertyChangedEventArgs(this, member)); } } Nice and handy. This was obviously the prime reason to implement this feature in the C# 5.0 compiler. You can repurpose this feature for tracing to get your hands on the method name of your caller along other stuff very fast now. All infos are added during compile time which is much faster than other approaches like walking the stack. The example on MSDN shows the usage of this attribute with an example public static void TraceMessage(string message, [CallerMemberName] string memberName = "", [CallerFilePath] string sourceFilePath = "", [CallerLineNumber] int sourceLineNumber = 0) { Console.WriteLine("Hi {0} {1} {2}({3})", message, memberName, sourceFilePath, sourceLineNumber); }   When I do think of tracing I do usually want to have a API which allows me to Trace method enter and leave Trace messages with a severity like Info, Warning, Error When I do print a trace message it is very useful to print out method and type name as well. So your API must either be able to pass the method and type name as strings or extract it automatically via walking back one Stackframe and fetch the infos from there. The first glaring deficiency is that there is no CallerTypeAttribute yet because the C# compiler team was not satisfied with its performance.   A usable Trace Api might therefore look like   enum TraceTypes { None = 0, EnterLeave = 1 << 0, Info = 1 << 1, Warn = 1 << 2, Error = 1 << 3 } class Tracer : IDisposable { string Type; string Method; public Tracer(string type, string method) { Type = type; Method = method; if (IsEnabled(TraceTypes.EnterLeave,Type, Method)) { } } private bool IsEnabled(TraceTypes traceTypes, string Type, string Method) { // Do checking here if tracing is enabled return false; } public void Info(string fmt, params object[] args) { } public void Warn(string fmt, params object[] args) { } public void Error(string fmt, params object[] args) { } public static void Info(string type, string method, string fmt, params object[] args) { } public static void Warn(string type, string method, string fmt, params object[] args) { } public static void Error(string type, string method, string fmt, params object[] args) { } public void Dispose() { // trace method leave } } This minimal trace API is very fast but hard to maintain since you need to pass in the type and method name as hard coded strings which can change from time to time. But now we have at least CallerMemberName to rid of the explicit method parameter right? Not really. Since any acceptable usable trace Api should have a method signature like Tracexxx(… string fmt, params [] object args) we not able to add additional optional parameters after the args array. If we would put it before the format string we would need to make it optional as well which would mean the compiler would need to figure out what our trace message and arguments are (not likely) or we would need to specify everything explicitly just like before . There are ways around this by providing a myriad of overloads which in the end are routed to the very same method but that is ugly. I am not sure if nobody inside MS agrees that the above API is reasonable to have or (more likely) that the whole talk about you can use this feature for diagnostic purposes was not a core feature at all but a simple byproduct of making the life of INotifyPropertyChanged implementers easier. A way around this would be to allow for variable argument arrays after the params keyword another set of optional arguments which are always filled by the compiler but I do not know if this is an easy one. The thing I am missing much more is the not provided CallerType attribute. But not in the way you would think of. In the API above I did add some filtering based on method and type to stay as fast as possible for types where tracing is not enabled at all. It should be no more expensive than an additional method call and a bool variable check if tracing for this type is enabled at all. The data is tightly bound to the calling type and method and should therefore become part of the static type instance. Since extending the CLR type system for tracing is not something I do expect to happen I have come up with an alternative approach which allows me basically to attach run time data to any existing type object in super fast way. The key to success is the usage of generics.   class Tracer<T> : IDisposable { string Method; public Tracer(string method) { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public void Dispose() { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public static void Info(string fmt, params object[] args) { } /// <summary> /// Every type gets its own instance with a fresh set of variables to describe the /// current filter status. /// </summary> /// <typeparam name="T"></typeparam> internal class TraceData<UsingType> { internal static TraceData<UsingType> Instance = new TraceData<UsingType>(); public bool IsInitialized = false; // flag if we need to reinit the trace data in case of reconfigured trace settings at runtime public TraceTypes Enabled = TraceTypes.None; // Enabled trace levels for this type } } We do not need to pass the type as string or Type object to the trace Api. Instead we define a generic Api that accepts the using type as generic parameter. Then we can create a TraceData static instance which is due to the nature of generics a fresh instance for every new type parameter. My tests on my home machine have shown that this approach is as fast as a simple bool flag check. If you have an application with many types using tracing you do not want to bring the app down by simply enabling tracing for one special rarely used type. The trace filter performance for the types which are not enabled must be therefore the fasted code path. This approach has the nice side effect that if you store the TraceData instances in one global list you can reconfigure tracing at runtime safely by simply setting the IsInitialized flag to false. A similar effect can be achieved with a global static Dictionary<Type,TraceData> object but big hash tables have random memory access semantics which is bad for cache locality and you always need to pay for the lookup which involves hash code generation, equality check and an indexed array access. The generic version is wicked fast and allows you to add more features to your tracing Api with minimal perf overhead. But it is cumbersome to write the generic type argument always explicitly and worse if you do refactor code and move parts of it to other classes it might be that you cannot configure tracing correctly. I would like therefore to decorate my type with an attribute [CallerType] class Tracer<T> : IDisposable to tell the compiler to fill in the generic type argument automatically. class Program { static void Main(string[] args) { using (var t = new Tracer()) // equivalent to new Tracer<Program>() { That would be really useful and super fast since you do not need to pass any type object around but you do have full type infos at hand. This change would be breaking if another non generic type exists in the same namespace where now the generic counterpart would be preferred. But this is an acceptable risk in my opinion since you can today already get conflicts if two generic types of the same name are defined in different namespaces. This would be only a variation of this issue. When you do think about this further you can add more features like to trace the exception in your Dispose method if the method is left with an exception with that little trick I did write some time ago. You can think of tracing as a super fast and configurable switch to write data to an output destination or to execute alternative actions. With such an infrastructure you can e.g. Reconfigure tracing at run time. Take a memory dump when a specific method is left with a specific exception. Throw an exception when a specific trace statement is hit (useful for testing error conditions). Execute a passed delegate which e.g. dumps additional state when enabled. Write data to an in memory ring buffer and dump it when specific events do occur (e.g. method is left with an exception, triggered from outside). Write data to an output device. …. This stuff is really useful to have when your code is in production on a mission critical server and you need to find the root cause of sporadic crashes of your application. It could be a buggy graphics card driver which throws access violations into your application (ok with .NET 4 not anymore except if you enable a compatibility flag) where you would like to have a minidump or you have reached after two weeks of operation a state where you need a full memory dump at a specific point in time in the middle of an transaction. At my older machine I do get with this super fast approach 50 million traces/s when tracing is disabled. When I do know that tracing is enabled for this type I can walk the stack by using StackFrameHelper.GetStackFramesInternal to check further if a specific action or output device is configured for this method which is about 2-3 times faster than the regular StackTrace class. Even with one String.Format I am down to 3 million traces/s so performance is not so important anymore since I do want to do something now. The CallerMemberName feature of the C# 5 compiler is nice but I would have preferred to get direct access to the MethodHandle and not to the stringified version of it. But I really would like to see a CallerType attribute implemented to fill in the generic type argument of the call site to augment the static CLR type data with run time data.

    Read the article

  • Unit test SHA256 wrapper queries

    - by Sam Leach
    I am just beginning to write unit tests. So please bear with me. I have the following SHA256 wrapper. public static string SHA256(string plainText) { StringBuilder sb = new StringBuilder(); SHA256CryptoServiceProvider provider = new SHA256CryptoServiceProvider(); var hashedBytes = provider.ComputeHash(Encoding.UTF8.GetBytes(plainText)); for (int i = 0; i < hashedBytes.Length; i++) { sb.Append(hashedBytes[i].ToString("x2").ToLower()); } return sb.ToString(); } Do I want to be testing it? If so, what do you recommend? My thought process is as follows: What logic is there here. The answer is my for loop and ToString("x2") so from my understanding I want to be testing this part? I can assume Encoding.UTF8.GetBytes(plainText) works. Correct assumption? I can assume SHA256CryptoServiceProvider.ComputeHash() works. Correct assumption? I want to be only testing my logic. In this case is limited to the printing of hex encoded hash. Correct? Thanks.

    Read the article

  • Convert MP3 to AAC,FLAC to AAC (.NET/C#) FREE :)

    - by PearlFactory
    So I was tasked with looking at converting 10 million tracks from mp3 320k to AAC and also Converting from mp3 320k to mp3 128k After a bit of hunting around the tool you need to use is FFMPEG Download x64 WindowsAlso for the best results get the Nero AACEncoder Download Now the command line STEP 1(From Flac)ffmpeg -i input.flac -f wav - | neroAacEnc -ignorelength -q 0.5 -if - -of output.m4aor (From mp3)ffmpeg -i input.mp3 -f wav - | neroAacEnc -ignorelength -q 0.5 -if - -of output.m4aNow the output.m4a is a intermediate state that we now put a ACC wrapper on via FFMpeg STEP 2ffmpeg -i output.m4a -vn -acodec copy final.aacDone :) There are a couple of options with the FFMPEG library as in we can look at importing the librarys and manipulation the API for the direct result FFMPEG has this support. You can get the relevant librarys from HereThey even have the source if you are that keen :-)In this case I am going to wrap the command lines into c# external process threads.( For the app that i am building to convert the 10 million tracks there is a complex multithreaded app to support this novel code )//Arrange Metadata about Call Process myProcess = new Process();ProcessStartInfo p = new ProcessStartInfo();string sArgs = string.format(" -i {0} -f wav - | neroAacEnc -ignorelength -q 0.5 -if - -of {1}",inputfile,outputfil) ; p.FileName = "ffmpeg.exe" ; p.CreateNoWindow = true; p.RedirectStandardOutput = true; //p.WindowStyle = ProcessWindowStyle.Normal p.UseShellExecute = false;//Execute p.Arguments = sArgs; myProcess.StartInfo = p; myProcess.Start(); myProcess.WaitForExit();//Write details about call  myProcess.StandardOutput.ReadToEnd();Now in this case we would execute a 2nd call using the same code but with different sArgs to put the AAC wrapper on the m4a file. Thats it. So if you need to do some conversions of any kind for you ASP.net sites/apps this is a great start and super fast.. With conversion times of around 2-3 seconds all of this can be done on the fly:-)Justin Oehlmannref : StackOverflow.com

    Read the article

  • Steam (via Wine) crashes after login - any troubleshooting tips?

    - by new Thrall
    The Steam client crashes after I login. After submitting my credentials, Steam displays a dialog box informing me the client is 'connecting'. I then see the Steam main page and news page displayed for roughly a second or so before the client crashes. I'm running Ubuntu 10.10 (I think..what's the best way to verify? uname only displays Linux) which I've installed on a usb flash drive using a capser-rw file for persistence. wine-1.3.14 I'm not sure how to troubleshoot. How do I identify if the problem is with wine or steam or the video card driver, or what? Any ideas? hardware: motherboard: ECS Elitegroup 945GCT-M sound: integrated audio video: ATI Radeon X1950 console output: ubuntu@ubuntu:~/.wine/drive_c/Program Files/Steam$ wine Steam.exe fixme:process:GetLogicalProcessorInformation ((nil),0x32e488): stub fixme:process:GetLogicalProcessorInformation (0x1010c00,0x32e488): stub fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub. fixme:urlmon:CoInternetSetFeatureEnabled 5, 0x00000002, 1, stub fixme:urlmon:CoInternetSetFeatureEnabled 10, 0x00000002, 1, stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 2, 0x32d334, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 3, 0x32d338, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 4, 0x32d33c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 2, 0x32d964, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 3, 0x32d968, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 4, 0x32d96c, 4) stub err:ole:CoGetClassObject class {77f10cf0-3db5-4966-b520-b7c54fd35ed6} not registered err:ole:CoGetClassObject no class object {77f10cf0-3db5-4966-b520-b7c54fd35ed6} could be created for context 0x1 fixme:wbemprox:wbem_locator_ConnectServer 0x1ab5f0, L"ROOT\CIMV2", (null), (null), (null), 0x00000080, (null), (nil), 0x42bbee8) fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 2, 0x32d8cc, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 3, 0x32d8d0, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 4, 0x32d8d4, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 2, 0x32d80c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 3, 0x32d810, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 4, 0x32d814, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 2, 0x32d2e4, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 3, 0x32d2e8, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 4, 0x32d2ec, 4) stub fixme:winhttp:WinHttpGetIEProxyConfigForCurrentUser returning no proxy used fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 2, 0x32d94c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 3, 0x32d950, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 4, 0x32d954, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 2, 0x32da8c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 3, 0x32da90, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 4, 0x32da94, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 2, 0x32d514, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 3, 0x32d518, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 4, 0x32d51c, 4) stub fixme:dbghelp:elf_search_auxv can't find symbol in module

    Read the article

  • SQL SERVER 2008 – 2011 – Declare and Assign Variable in Single Statement

    - by pinaldave
    Many of us are tend to overlook simple things even if we are capable of doing complex work. In SQL Server 2008, inline variable assignment is available. This feature exists from last 3 years, but I hardly see its utilization. One of the common arguments was that as the project migrated from the earlier version, the feature disappears. I totally accept this argument and acknowledge it. However, my point is that this new feature should be used in all the new coding – what is your opinion? The code which we used in SQL Server 2005 and the earlier version is as follows: DECLARE @iVariable INT, @vVariable VARCHAR(100), @dDateTime DATETIME SET @iVariable = 1 SET @vVariable = 'myvar' SET @dDateTime = GETDATE() SELECT @iVariable iVar, @vVariable vVar, @dDateTime dDT GO The same should be re-written as following: DECLARE @iVariable INT = 1, @vVariable VARCHAR(100) = 'myvar', @dDateTime DATETIME = GETDATE() SELECT @iVariable iVar, @vVariable vVar, @dDateTime dDT GO I have started to use this new method to assign variables as I personally find it very easy to read as well write. Do you still use the earlier method to declare and assign variables? If yes, is there any particular reason or just an old routine? I am interested to hear about this. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >