Search Results

Search found 5152 results on 207 pages for 'scheduled tasks'.

Page 181/207 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

• Scientific Data processing (Graph comparison and interpretation)

  - by pinkynobrain

  Hi stackoverflow friends, I'm trying to write a program to automate one of my more boring and repetitive work tasks. I have some programming experience but none with processing or interpreting large volumes of data so I am seeking your advice (both suggestions of techniques to try and also things to read to learn more about doing this stuff). I have a piece of equipment that monitors an experiment by taking repeated samples and displays the readings on its screen as a graph. The input of experiment can be altered and one of these changes should produce a change in a section of the graph which I currently identify by eye and is what I'm looking for in the experiment. I want to automate it so that a computer looks at a set of results and spots the experiment input that causes the change. I can already extract the results from the machine. Currently they results for a run are in the form of an integer array with the index being the sample number and the corresponding value being the measurement. The overall shape of the graph will be similar for each experiment run. The change I'm looking for will be roughly the same and will occur in approximately the same place every time for the correct experiment input. Unfortunately there are a few gotchas that make this problem more difficult. There is some noise in the measuring process which mean there is some random variation in the measured values between different runs. Although the overall shape of the graph remains the same. The time the experiment takes varies slightly each run causing two effects. First, the a whole graph may be shifted slightly on the x axis relative to another run's graph. Second, individual features may appear slightly wider or narrower in different runs. In both these cases the variation isn't particularly large and you can assume that the only non random variation is caused by the correct input being found. Thank you for your time, Pinky

  Read the article

• Time.new does not work as I would expect

  - by Marius Pop

  I am trying to generate some seed material. seed_array.each do |seed| Task.create(date: Date.new(2012,06,seed[1]), start_t: Time.new(2012,6,2,seed[2],seed[3]), end_t: Time.new(2012,6,2,seed[2] + 2,seed[3]), title: "#{seed[0]}") end Ultimately I will put random hours, minutes, seconds. The problem that I am facing is that instead of creating a time with the 2012-06-02 date it creates a time with a different date: 2000-01-01. I tested Time.new(2012,6,2,2,20,45) in rails console and it works as expected. When I am trying to seed my database however some voodo magic happens and I don't get the date I want. Any inputs are appreciated. Thank you! Update1: * [1m[36m (0.0ms)[0m [1mbegin transaction[0m [1m[35mSQL (0.5ms)[0m INSERT INTO "tasks" ("created_at", "date", "description", "end_t", "group_id", "start_t", "title", "updated_at") VALUES (?, ?, ?, ?, ?, ?, ?, ?) [["created_at", Tue, 03 Jul 2012 02:15:34 UTC +00:00], ["date", Thu, 07 Jun 2012], ["description", nil], ["end_t", 2012-06-02 10:02:00 -0400], ["group_id", nil], ["start_t", 2012-06-02 08:02:00 -0400], ["title", "99"], ["updated_at", Tue, 03 Jul 2012 02:15:34 UTC +00:00]] [1m[36m (2.3ms)[0m [1mcommit transaction * This is a small sample of the log. Update 2 Task id: 101, date: "2012-06-26", start_t: "2000-01-01 08:45:00", end_t: "2000-01-01 10:45:00", title: "1", description: nil, group_id: nil, created_at: "2012-07-03 02:15:33", updated_at: "2012-07-03 02:15:33" This is what shows up in rails console.

  Read the article

• Show my website's content on other websites. Is iframe only option?

  - by Jashwant

  In my project, I have created a code snippet which can be copied and then put in any website. It shows my content on other websites. What I am using now is : <script type='text/javascript'> var user = 'abc'; var age = '23'; document.write('<iframe src="http://www.mysite.com/page.php?user='+ user + '&age=' + age + '" ></iframe'); </script> In page.php, I do some processing based on user and age and show dynamic content. My approach works fine. But when I look into some good standard ways to do such tasks, I find a different way. Take an example of google adsense code. <script type='text/javascript'> var a = 'somedata'; var b = 'someotherdata'; </script> <script type='text/javascript' src='http://www.google.com/adsenseurl.js'></script> I guess, since a and b are global; adsenseurl.js must be using it and may be finally they are showing it on iframe. So, now the question. What's the advantage in using google's approach and whats wrong in my approach ? p.s. I know I should try to avoid using iframes but I dont see any other way to accomplish this.

  Read the article

• What is the best practice when using UIStoryboards?

  - by Scott Sherwood

  Having used storyboards for a while now I have found them extremely useful however, they do have some limitations or at least unnatural ways of doing things. While it seems like a single storyboard should be used for your app, when you get to even a moderately sized application this presents several problems. Working within teams is made more difficult as conflicts in Storyboards can be problematic to resolve (any tips with this would also be welcome) The storyboard itself can become quite cluttered and unmanageable. So my question is what are the best practices of use? I have considered using a hybrid approach having logical tasks being split into separate storyboards, however this results in the UX flow being split between the code and the storyboard. To me this feels like the best way to create reusable actions such as login actions etc. Also should I still consider a place for Xibs? This article has quite a good overview of many of the issues and it proposes that for scenes that only have one screen, xibs should be used in this case. Again this feels unusual to me with Apples support for instantiating unconnected scenes from a storyboard it would suggest that xibs won't have a place in the future but I could be wrong.

  Read the article

• how to get http responses continuously to a java application?

  - by senrulz

  I have the coding shown below where I have sheduled to get a http response from a php web server page. public static void stopPHPDataChecker() { canStop=true; } public static void main (String args[]) { // http request to the php page and get the response PHPDataChecker pdc = new PHPDataChecker(); ScheduledExecutorService scheduler = Executors.newScheduledThreadPool(1); final ScheduledFuture<?> pdcHandle = scheduler.scheduleAtFixedRate(pdc, 0L, 10L, TimeUnit.MILLISECONDS);// Start schedule scheduler.schedule(new Runnable() { public void run() { System.out.println(">> TRY TO STOP!!!"); pdcHandle.cancel(true); Sheduler.stopPHPDataChecker(); System.out.println("DONE"); } }, 1L, TimeUnit.MILLISECONDS); do { if (canStop) { scheduler.shutdown(); } } while (!canStop); System.out.println("END"); } this coding only returns one response but I want it to get responses continuously so i can do different tasks according to the returned value. how can i do it? Thank you in advance :)

  Read the article

• C# return and display syntax issue

  - by thatdude

  I am having trouble passing the return value from TheMethod() to Main and displaying the word if the if statement is passed as true. I have thought of two ways of doing this, neither has worked but I think I am missing synatx. Using a return ?; non void method and then displaying the returned value. Using a void method and actually writing out(example below) So yes I am new at this, however I have made so many iterations everything is blending together and I have forgot what I have tried. Any help on the syntax be great for either of these ways. Basically I need it to iterate numbers 1,2,3,4 and depending on if the current iteration matches an expression in the if statements it will display a word. Example: if (3 = i) { Console.WriteLine("Word"); } Code: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; namespace Proj5 { class Program { int i = 0; static void Main(int i) { for (i = 0; i < 101; i++) { Console.WriteLine("test"); } } string TheMethod(int i) { string f = "Word1"; string b = "Word2"; if (i == 3) { return f; } if (i == 5) { return b; } if (0 == (i % 3)) { return f; } if (0 == i % 5) { return b; } else { return b; } } } }

  Read the article

• Clients not updating with approved updates from WSUS

  - by Ross

  Hi All, I've been a bit behind in my windows XP updates recently, and I have about 18 or so I need to roll out to all our users, according to WSUS. I'm trying it on a couple of test PCs, and so far i've had no luck. On each one, one update would install (and need a reboot), and nothing else since. When I run wuauclt.exe /detectnow, I get this in the windowsupdate.log: 2009-10-29 17:27:10:624 1128 93c AU Triggering AU detection through DetectNow API 2009-10-29 17:27:10:624 1128 93c AU Triggering Online detection (non-interactive) 2009-10-29 17:27:10:624 1128 504 AU ############# 2009-10-29 17:27:10:624 1128 504 AU ## START ## AU: Search for updates 2009-10-29 17:27:10:624 1128 504 AU ######### 2009-10-29 17:27:10:624 1128 504 AU <<## SUBMITTED ## AU: Search for updates [CallId = {59353978-CBA7-4B0B-AFD3-515577D3C16B}] 2009-10-29 17:27:10:624 1128 a14 Agent ************* 2009-10-29 17:27:10:624 1128 a14 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2009-10-29 17:27:10:624 1128 a14 Agent ********* 2009-10-29 17:27:10:624 1128 a14 Agent * Online = Yes; Ignore download priority = No 2009-10-29 17:27:10:624 1128 a14 Agent * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1 or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1" 2009-10-29 17:27:10:624 1128 a14 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} 2009-10-29 17:27:10:624 1128 a14 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab: 2009-10-29 17:27:10:655 1128 a14 Misc Microsoft signed: Yes 2009-10-29 17:27:10:702 1128 a14 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab: 2009-10-29 17:27:10:702 1128 a14 Misc Microsoft signed: Yes 2009-10-29 17:27:10:780 1128 a14 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wsus3setup.cab: 2009-10-29 17:27:10:780 1128 a14 Misc Microsoft signed: Yes 2009-10-29 17:27:10:796 1128 a14 Setup *********** Setup: Checking whether self-update is required *********** 2009-10-29 17:27:10:796 1128 a14 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wsus3setup.inf 2009-10-29 17:27:10:796 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\cdm.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:796 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuapi.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:796 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuapi.dll.mui: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:796 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuauclt.exe: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuaucpl.cpl: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuaucpl.cpl.mui: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuaueng.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuaueng.dll.mui: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wucltui.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wucltui.dll.mui: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wups.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wups2.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup Update NOT required for C:\WINDOWS\system32\wuweb.dll: target version = 7.1.6001.65, required version = 7.1.6001.65 2009-10-29 17:27:10:874 1128 a14 Setup * IsUpdateRequired = No 2009-10-29 17:27:17:468 1128 a14 PT +++++++++++ PT: Synchronizing server updates +++++++++++ 2009-10-29 17:27:17:468 1128 a14 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = hxxp://dublindc2/ClientWebService/client.asmx 2009-10-29 17:27:55:157 1128 a14 Agent * Found 0 updates and 46 categories in search; evaluated appl. rules of 478 out of 678 deployed entities 2009-10-29 17:27:55:173 1128 a14 Agent ********* 2009-10-29 17:27:55:173 1128 a14 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates] 2009-10-29 17:27:55:173 1128 a14 Agent ************* 2009-10-29 17:27:55:189 1128 f1c AU >>## RESUMED ## AU: Search for updates [CallId = {59353978-CBA7-4B0B-AFD3-515577D3C16B}] 2009-10-29 17:27:55:189 1128 f1c AU # 0 updates detected 2009-10-29 17:27:55:189 1128 f1c AU ######### 2009-10-29 17:27:55:189 1128 f1c AU ## END ## AU: Search for updates [CallId = {59353978-CBA7-4B0B-AFD3-515577D3C16B}] 2009-10-29 17:27:55:189 1128 f1c AU ############# 2009-10-29 17:27:55:189 1128 f1c AU AU setting next detection timeout to 2009-10-29 21:01:30 2009-10-29 17:27:55:189 1128 f1c AU Setting AU scheduled install time to 2009-10-30 13:00:00 2009-10-29 17:27:55:251 1128 a14 Report Uploading 2 events using cached cookie, reporting URL = hxxp://dublindc2/ReportingWebService/ReportingWebService.asmx 2009-10-29 17:27:55:267 1128 a14 Report Reporter successfully uploaded 2 events. 2009-10-29 17:28:00:173 1128 a14 Report REPORT EVENT: {BD891590-784B-4001-8116-D83962DAB749} 2009-10-29 17:27:55:173-0000 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 0 updates. 2009-10-29 17:28:00:173 1128 a14 Report REPORT EVENT: {E578C377-5E09-4F4C-AB28-FE5131E2D6A7} 2009-10-29 17:27:55:173-0000 1 I've tried deleting everything in the C:\Windows\SoftwareDistribution, stopping the services, rebooting etc. Can anyone decipher the log to see where it's going wrong? Many thanks!

  Read the article

• PHP-FPM High Memory Usage

  - by Ruel

  I have a wordpress blog, that uses WP-SuperCache, and normally I get 100 visitors per day. With nginx + php-fpm it's blazing fast, and I have no regrets. One thing i noticed, php-fpm takes a lot of memory: top - 09:20:43 up 5 days, 15:53, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 26 total, 1 running, 25 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 329956k used, 718620k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10226 www-data 15 0 145m 52m 4584 S 0.0 5.1 0:07.55 php-fpm 10223 www-data 16 0 141m 48m 4692 S 0.0 4.8 0:08.70 php-fpm 20277 www-data 15 0 138m 46m 4368 S 0.0 4.5 0:07.55 php-fpm 20259 www-data 15 0 133m 41m 4600 S 0.0 4.0 0:06.68 php-fpm 12201 www-data 15 0 133m 41m 4632 S 0.0 4.0 0:08.31 php-fpm 11586 www-data 15 0 132m 40m 4292 S 0.0 3.9 0:03.27 php-fpm 29822 www-data 15 0 128m 36m 4356 S 0.0 3.6 0:05.26 php-fpm 28427 mysql 15 0 200m 7300 4764 S 0.0 0.7 0:47.89 mysqld 10202 root 18 0 98.3m 4320 1204 S 0.0 0.4 0:03.80 php-fpm 22524 root 18 0 86064 3396 2652 S 0.0 0.3 0:16.74 sshd 9882 www-data 18 0 42052 2572 804 S 0.0 0.2 0:27.52 nginx 9884 www-data 18 0 42052 2560 804 S 0.0 0.2 0:26.26 nginx 9881 www-data 18 0 42064 2524 804 S 0.0 0.2 0:29.24 nginx 9879 www-data 18 0 42032 2480 804 S 0.0 0.2 0:29.58 nginx 23771 root 15 0 12176 1820 1316 S 0.0 0.2 0:00.08 bash 28344 root 22 0 11932 1416 1184 S 0.0 0.1 0:00.00 mysqld_safe 18167 root 16 0 62628 1208 648 S 0.0 0.1 0:00.55 sshd 25941 root 15 0 12612 1192 928 R 0.0 0.1 0:02.21 top 11573 root 15 0 20876 1168 592 S 0.0 0.1 0:00.67 crond 9878 root 18 0 41000 1112 284 S 0.0 0.1 0:00.00 nginx 21736 root 23 0 21648 936 716 S 0.0 0.1 0:00.00 xinetd 11585 root 18 0 46748 816 428 S 0.0 0.1 0:00.00 saslauthd 14125 root 12 -4 12768 768 452 S 0.0 0.1 0:00.00 udevd 1 root 18 0 10352 728 616 S 0.0 0.1 0:17.93 init 24564 root 15 0 5912 680 544 S 0.0 0.1 0:01.90 syslogd 11618 root 18 0 46748 548 160 S 0.0 0.1 0:00.00 saslauthd Here's my php-fpm config: [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.start_servers = 3 pm.min_spare_servers = 3 pm.max_spare_servers = 10 pm.max_requests = 500 Sometimes it goes up to 400MB. And I'm planning to add a new website on my VPS. Is this normal?

  Read the article

• Apache taking up too much CPU

  - by andrewtweber

  I'm trying to manage a server on Amazon for a network of sites that receives about 100 million pageviews per month. Unfortunately, nobody out of my team of 5 developers has much server admin experience. Right now we have the MaxClients set to 1400. Currently our traffic is about average, and we have 1150 total Apache processes running, which use about 2% CPU each! Out of those 1150, 800 of them are currently sleeping, but still taking up CPU. I'm sure there are ways to optimize this. I have a few thoughts: It appears Apache is creating a new process for every single connection. Is this normal? Is there a way to more quickly kill the sleeping processes? Should we turn KeepAlive on? Each page loads about 15-20 medium-sized graphics and a lot of javascript/css. So, here's our Apache setup. We do plan on contracting a server admin asap, but I would really appreciate some advice until we can find someone. Timeout 25 KeepAlive Off MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 100 MinSpareServers 20 MaxSpareServers 50 ServerLimit 1400 MaxClients 1400 MaxRequestsPerChild 5000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 400 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Full top output: top - 23:44:36 up 1 day, 6:43, 4 users, load average: 379.14, 379.17, 377.22 Tasks: 1153 total, 379 running, 774 sleeping, 0 stopped, 0 zombie Cpu(s): 71.9%us, 26.2%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 70343000k total, 23768448k used, 46574552k free, 527376k buffers Swap: 0k total, 0k used, 0k free, 10054596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1756 mysql 20 0 10.2g 1.8g 5256 S 19.8 2.7 904:41.13 mysqld 21515 apache 20 0 396m 18m 4512 R 2.1 0.0 0:34.42 httpd 21524 apache 20 0 396m 18m 4032 R 2.1 0.0 0:32.63 httpd 21544 apache 20 0 394m 16m 4084 R 2.1 0.0 0:36.38 httpd 21643 apache 20 0 396m 18m 4360 R 2.1 0.0 0:34.20 httpd 21817 apache 20 0 396m 17m 4064 R 2.1 0.0 0:38.22 httpd 22134 apache 20 0 395m 17m 4584 R 2.1 0.0 0:35.62 httpd 22211 apache 20 0 397m 18m 4104 R 2.1 0.0 0:29.91 httpd 22267 apache 20 0 396m 18m 4636 R 2.1 0.0 0:35.29 httpd 22334 apache 20 0 397m 18m 4096 R 2.1 0.0 0:34.86 httpd 22549 apache 20 0 395m 17m 4056 R 2.1 0.0 0:31.01 httpd 22612 apache 20 0 397m 19m 4152 R 2.1 0.0 0:34.34 httpd 22721 apache 20 0 396m 18m 4060 R 2.1 0.0 0:32.76 httpd 22932 apache 20 0 396m 17m 4020 R 2.1 0.0 0:37.34 httpd 22933 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.77 httpd 22949 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.61 httpd 22956 apache 20 0 402m 24m 4072 R 2.1 0.0 0:41.45 httpd

  Read the article

• LaunchDaemon causing Lion to hang on boot

  - by Brett

  I've got a Mac Mini 2011, which I intend to use for a few tasks such as Plex and running a few VM's. I've installed virtualbox, along with XAMPP and phpvirtualbox, which all worked fine. However, getting this to run on startup is proving a real PITA! I'm at the moment trying to get vboxwebsrv running on boot. I've created a launchd plist within /Library/LaunchDaemons to run it and it works fine... well sort of. Lion when booting will show the spinning wheel and stop, never showing a GUI - however if I remote in via screen sharing or SSH, I can login fine and see that vboxwebsrv has launched successfully. Setting this plist to disabled makes lion boot up fine again. Initially I thought it was due to it staying open, so tried to add -b which causes it to run in the background, this just caused launchd to constantly spawn new processes and didn't even fix my problem of Lion being stuck at the spinning wheel. Does anyone have any ideas? I'm losing my mind here! PLIST: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Disabled</key> <false/> <key>KeepAlive</key> <false/> <key>UserName</key> <string>vbox</string> <key>RunAtLoad</key> <true/> <key>OnDemand</key> <false/> <key>Label</key> <string>org.virtualbox.vboxwebsvc</string> <key>ProgramArguments</key> <array> <string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string> </array> </dict> </plist>

  Read the article

• Mysql performance problem & Failed DIMM

  - by murdoch

  Hi I have a dedicated mysql database server which has been having some performance problems recently, under normal load the server will be running fine, then suddenly out of the blue the performance will fall off a cliff. The server isn't using the swap file and there is 12GB of RAM in the server, more than enough for its needs. After contacting my hosting comapnies support they have discovered that there is a failed 2GB DIMM in the server and have scheduled to replace it tomorow morning. My question is could a failed DIMM result in the performance problems I am seeing or is this just coincidence? My worry is that they will replace the ram tomorrow but the problems will persist and I will still be lost of explanations so I am just trying to think ahead. The reason I ask is that there is plenty of RAM in the server, more than required and simply missing 2GB should be a problem, so if this failed DIMM is causing these performance problems then the OS must be trying to access the failed DIMM and slowing down as a result. Does that sound like a credible explanation? This is what DELLs omreport program says about the RAM, notice one dimm is "Critical" Memory Information Health : Critical Memory Operating Mode Fail Over State : Inactive Memory Operating Mode Configuration : Optimizer Attributes of Memory Array(s) Attributes : Location Memory Array 1 : System Board or Motherboard Attributes : Use Memory Array 1 : System Memory Attributes : Installed Capacity Memory Array 1 : 12288 MB Attributes : Maximum Capacity Memory Array 1 : 196608 MB Attributes : Slots Available Memory Array 1 : 18 Attributes : Slots Used Memory Array 1 : 6 Attributes : ECC Type Memory Array 1 : Multibit ECC Total of Memory Array(s) Attributes : Total Installed Capacity Value : 12288 MB Attributes : Total Installed Capacity Available to the OS Value : 12004 MB Attributes : Total Maximum Capacity Value : 196608 MB Details of Memory Array 1 Index : 0 Status : Ok Connector Name : DIMM_A1 Type : DDR3-Registered Size : 2048 MB Index : 1 Status : Ok Connector Name : DIMM_A2 Type : DDR3-Registered Size : 2048 MB Index : 2 Status : Ok Connector Name : DIMM_A3 Type : DDR3-Registered Size : 2048 MB Index : 3 Status : Critical Connector Name : DIMM_B1 Type : DDR3-Registered Size : 2048 MB Index : 4 Status : Ok Connector Name : DIMM_B2 Type : DDR3-Registered Size : 2048 MB Index : 5 Status : Ok Connector Name : DIMM_B3 Type : DDR3-Registered Size : 2048 MB the command free -m shows this, the server seems to be using more than 10GB of ram which would suggest it is trying to use the DIMM total used free shared buffers cached Mem: 12004 10766 1238 0 384 4809 -/+ buffers/cache: 5572 6432 Swap: 2047 0 2047 iostat output while problem is occuring avg-cpu: %user %nice %system %iowait %steal %idle 52.82 0.00 11.01 0.00 0.00 36.17 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 47.00 0.00 576.00 0 576 sda1 0.00 0.00 0.00 0 0 sda2 1.00 0.00 32.00 0 32 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 46.00 0.00 544.00 0 544 avg-cpu: %user %nice %system %iowait %steal %idle 53.12 0.00 7.81 0.00 0.00 39.06 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 49.00 0.00 592.00 0 592 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 49.00 0.00 592.00 0 592 avg-cpu: %user %nice %system %iowait %steal %idle 56.09 0.00 7.43 0.37 0.00 36.10 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 232.00 0.00 64520.00 0 64520 sda1 0.00 0.00 0.00 0 0 sda2 159.00 0.00 63728.00 0 63728 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 73.00 0.00 792.00 0 792 avg-cpu: %user %nice %system %iowait %steal %idle 52.18 0.00 9.24 0.06 0.00 38.51 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 49.00 0.00 600.00 0 600 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 49.00 0.00 600.00 0 600 avg-cpu: %user %nice %system %iowait %steal %idle 54.82 0.00 8.64 0.00 0.00 36.55 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 100.00 0.00 2168.00 0 2168 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 100.00 0.00 2168.00 0 2168 avg-cpu: %user %nice %system %iowait %steal %idle 54.78 0.00 6.75 0.00 0.00 38.48 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 84.00 0.00 896.00 0 896 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 84.00 0.00 896.00 0 896 avg-cpu: %user %nice %system %iowait %steal %idle 54.34 0.00 7.31 0.00 0.00 38.35 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 81.00 0.00 840.00 0 840 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 81.00 0.00 840.00 0 840 avg-cpu: %user %nice %system %iowait %steal %idle 55.18 0.00 5.81 0.44 0.00 38.58 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 317.00 0.00 105632.00 0 105632 sda1 0.00 0.00 0.00 0 0 sda2 224.00 0.00 104672.00 0 104672 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 93.00 0.00 960.00 0 960 avg-cpu: %user %nice %system %iowait %steal %idle 55.38 0.00 7.63 0.00 0.00 36.98 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 74.00 0.00 800.00 0 800 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 74.00 0.00 800.00 0 800 avg-cpu: %user %nice %system %iowait %steal %idle 56.43 0.00 7.80 0.00 0.00 35.77 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 72.00 0.00 784.00 0 784 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 72.00 0.00 784.00 0 784 avg-cpu: %user %nice %system %iowait %steal %idle 54.87 0.00 6.49 0.00 0.00 38.64 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 80.20 0.00 855.45 0 864 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 80.20 0.00 855.45 0 864 avg-cpu: %user %nice %system %iowait %steal %idle 57.22 0.00 5.69 0.00 0.00 37.09 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 33.00 0.00 432.00 0 432 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 33.00 0.00 432.00 0 432 avg-cpu: %user %nice %system %iowait %steal %idle 56.03 0.00 7.93 0.00 0.00 36.04 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 41.00 0.00 560.00 0 560 sda1 0.00 0.00 0.00 0 0 sda2 2.00 0.00 88.00 0 88 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 39.00 0.00 472.00 0 472 avg-cpu: %user %nice %system %iowait %steal %idle 55.78 0.00 5.13 0.00 0.00 39.09 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 29.00 0.00 392.00 0 392 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 29.00 0.00 392.00 0 392 avg-cpu: %user %nice %system %iowait %steal %idle 53.68 0.00 8.30 0.06 0.00 37.95 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 78.00 0.00 4280.00 0 4280 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 78.00 0.00 4280.00 0 4280

  Read the article

• How to grow to be global sysadmin of an organization?

  - by user64729

  Bit of a non-technical question but I have seen questions of the career development type on here before so hopefully it is fine. I work for a fast growing but still small organization (~65 employees). I have been their external sysadmin for a while now, looking after hosted Linux servers and infrastructure. In the past 12 months I have been transforming into the internal sysadmin for our office too. I'm currently studying Cisco CCNA to cover the demands of being an internal sysadmin and looking after the office LAN, routers, switches and VPNs. Now they want me to look after the global sysadmin function of the organization as a whole. The organization has 3 offices in total, 2 in the UK and 1 in the US. I work in one of the UK offices. The other offices are primarily Windows desktops with AD domain shops. My office is primarily a Linux shop with a file-server and NFS/NIS (no AD domain for the Windows desktops yet but it's in the works). Each other office has a sysadmin which in theory I am supposed to supervise but in reality each is independent. I have a very competent junior sysadmin working with me who shares the day-to-day tasks and does some of the longer term projects with my supervision. My boss has asked me how to grow from being the external sysadmin to the global sysadmin. I am to ponder this and then report back to him on how to achieve this. My current thoughts are: Management training or professional development - eg. reading books such as "Influencer" and "7 Habits". Also I feel I should take steps to improving communication skills since a senior person is expected to talk and speak out more often. Learn more about Windows and Active Directory - I'm an LPI-certified guy and have a lot of experience in Linux (Ubuntu or desktop, Debian/Ubuntu as server). Since the other offices are mainly Windows-domains it makes sense to skill-up in that area so I can understand what the other admins are talking about. Talk to previous colleagues who have are are in this role already - to try and get the benefit of their experience. Produce an "IT Roadmap" or similar that maps out where we want the organization to be and when, plotted out over the next couple of years with regards to internal and external infrastructure. I have produced a "Security roadmap" already which does cover some of these things. I guess this can summed up as "thinking more strategically"? I'd appreciate comments from anyone who has been through a similar situation, thanks.

  Read the article

• Server load spikes several times a day, load average for the past month is 5 times the load average all year

  - by AMF

  My Munin notifications set up for our (Debian) LAMP cluster have been notifying me continuously that our load on our production machine has been at dangerous levels. While the average load all year typically runs between 2 and 8, the load in the past month and only the past month -- has been skyrocketing to 10, 18, and occasionally even 50-60. The spikes last only 5-10 minutes at a time and occur about every 2-3 hours. The spikes do not effect performance only because I have a script that sends traffic off our server to a mirror CDN when the load goes above 10. I've looked for cron jobs that correlate with this timeframe but there is nothing I can see that would cause this. Site traffic is also normal (we receive about 200K visits per day). I'm also trying to think of anything I've changed around the time this problem began, and I really cannot think of anything. This is probably not much to go on. Maybe there is a clue in the top print-out (below) that I'm not seeing. How do I proceed to find the cause? -- Typical top when the load is NOT spiking: top - 11:13:09 up 472 days, 25 min, 1 user, load average: 6.08, 4.29, 3.80 Tasks: 105 total, 1 running, 104 sleeping, 0 stopped, 0 zombie Cpu(s): 41.2%us, 5.8%sy, 0.0%ni, 49.5%id, 2.7%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 3369592k total, 2166980k used, 1202612k free, 559504k buffers Swap: 2650684k total, 1892k used, 2648792k free, 1129116k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32046 apache 15 0 36300 12m 9828 S 20 0.4 0:01.97 apache2 32679 apache 15 0 36568 13m 10m S 19 0.4 0:01.69 apache2 31441 apache 15 0 36616 13m 10m S 19 0.4 0:04.13 apache2 31477 apache 15 0 36596 13m 9.8m S 15 0.4 0:01.99 apache2 31993 apache 15 0 36876 16m 12m S 12 0.5 0:02.01 apache2 31782 apache 15 0 36836 14m 10m S 8 0.4 0:02.17 apache2 32198 apache 15 0 36536 13m 10m S 7 0.4 0:01.59 apache2 880 apache 15 0 36508 9708 6236 S 7 0.3 0:00.42 apache2 31945 apache 17 0 36876 16m 13m S 5 0.5 0:03.17 apache2 32197 apache 16 0 36636 10m 7504 S 5 0.3 0:02.70 apache2 32326 apache 15 0 37024 11m 7632 S 5 0.3 0:02.15 apache2 32565 apache 15 0 37280 13m 9.8m S 5 0.4 0:03.75 apache2 32676 apache 15 0 36896 16m 12m S 4 0.5 0:00.95 apache2 32678 apache 15 0 36536 12m 9692 S 4 0.4 0:02.27 apache2 974 apache 16 0 37064 9888 6016 D 4 0.3 0:00.13 apache2 32150 apache 16 0 36832 13m 10m S 3 0.4 0:01.74 apache2 31780 apache 16 0 36848 11m 7660 S 3 0.3 0:02.87 apache2

  Read the article

• Slow Memcached: Average 10ms memcached `get`

  - by Chris W.

  We're using Newrelic to measure our Python/Django application performance. Newrelic is reporting that across our system "Memcached" is taking an average of 12ms to respond to commands. Drilling down into the top dozen or so web views (by # of requests) I can see that some Memcache get take up to 30ms; I can't find a single use of Memcache get that returns in less than 10ms. More details on the system architecture: Currently we have four application servers each of which has a memcached member. All four memcached members participate in a memcache cluster. We're running on a cloud hosting provider and all traffic is running across the "internal" network (via "internal" IPs) When I ping from one application server to another the responses are in ~0.5ms Isn't 10ms a slow response time for Memcached? As far as I understand if you think "Memcache is too slow" then "you're doing it wrong". So am I doing it wrong? Here's the output of the memcache-top command: memcache-top v0.7 (default port: 11211, color: on, refresh: 3 seconds) INSTANCE USAGE HIT % CONN TIME EVICT/s GETS/s SETS/s READ/s WRITE/s cache1:11211 37.1% 62.7% 10 5.3ms 0.0 73 9 3958 84.6K cache2:11211 42.4% 60.8% 11 4.4ms 0.0 46 12 3848 62.2K cache3:11211 37.5% 66.5% 12 4.2ms 0.0 75 17 6056 170.4K AVERAGE: 39.0% 63.3% 11 4.6ms 0.0 64 13 4620 105.7K TOTAL: 0.1GB/ 0.4GB 33 13.9ms 0.0 193 38 13.5K 317.2K (ctrl-c to quit.) ** Here is the output of the top command on one machine: ** (Roughly the same on all cluster machines. As you can see there is very low CPU utilization, because these machines only run memcache.) top - 21:48:56 up 1 day, 4:56, 1 user, load average: 0.01, 0.06, 0.05 Tasks: 70 total, 1 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.3%st Mem: 501392k total, 424940k used, 76452k free, 66416k buffers Swap: 499996k total, 13064k used, 486932k free, 181168k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6519 nobody 20 0 384m 74m 880 S 1.0 15.3 18:22.97 memcached 3 root 20 0 0 0 0 S 0.3 0.0 0:38.03 ksoftirqd/0 1 root 20 0 24332 1552 776 S 0.0 0.3 0:00.56 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.62 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper ...output truncated...

  Read the article

• Excessive CPU Utilization for Bind 9.8.1 `named` processes

  - by justinzane

  I just noticed that named is eating vast amounts of CPU time for a very small network with only a few domains. Can someone help me determine what is misconfigured, please? Or how to debug this. top top - 14:13:08 up 25 days, 14:16, 1 user, load average: 1.04, 1.04, 1.05 Tasks: 149 total, 1 running, 148 sleeping, 0 stopped, 0 zombie %Cpu(s): 17.3 us, 4.3 sy, 0.0 ni, 78.2 id, 0.1 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 2042776 total, 1347916 used, 694860 free, 249396 buffers KiB Swap: 3976080 total, 30552 used, 3945528 free, 574164 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17445 bind 20 0 244m 42m 3124 S 99.4 2.2 2345:03 named rndc stats +++ Statistics Dump +++ (1352931389) ++ Incoming Requests ++ 65869 QUERY ++ Incoming Queries ++ 31809 A 241 NS 3 CNAME 27455 SOA 276 PTR 123 MX 462 TXT 5400 AAAA 7 A6 1 DS 14 DNSKEY 15 SPF 55 AXFR 8 ANY ++ Outgoing Queries ++ [View: internal] 22206 A 509 NS 10 SOA 25 PTR 12 MX 524 TXT 4851 AAAA 62 DNSKEY 19 SPF 3157 DLV [View: external] 87 A 2 NS 80 AAAA 120 DNSKEY 7 DLV [View: _bind] ++ Name Server Statistics ++ 65869 IPv4 requests received 27670 requests with EDNS(0) received 112 TCP requests received 65652 responses sent 20 truncated responses sent 27670 responses with EDNS(0) sent 62920 queries resulted in successful answer 37117 queries resulted in authoritative answer 28482 queries resulted in non authoritative answer 7 queries resulted in referral answer 591 queries resulted in nxrrset 53 queries resulted in SERVFAIL 2081 queries resulted in NXDOMAIN 14530 queries caused recursion 162 duplicate queries received 55 requested transfers completed ++ Zone Maintenance Statistics ++ 109536 IPv4 notifies sent ++ Resolver Statistics ++ [Common] [View: internal] 29362 IPv4 queries sent 2013 IPv6 queries sent 28531 IPv4 responses received 4209 NXDOMAIN received 6 SERVFAIL received 31 FORMERR received 32 EDNS(0) query failures 3359 query retries 836 query timeouts 5348 IPv4 NS address fetches 3271 IPv6 NS address fetches 83 IPv4 NS address fetch failed 2779 IPv6 NS address fetch failed 17421 DNSSEC validation attempted 12731 DNSSEC validation succeeded 4690 DNSSEC NX validation succeeded 21104 queries with RTT 10-100ms 7418 queries with RTT 100-500ms 3 queries with RTT 500-800ms 1 queries with RTT 800-1600ms [View: external] 192 IPv4 queries sent 104 IPv6 queries sent 192 IPv4 responses received 2 NXDOMAIN received 104 query retries 44 IPv4 NS address fetches 44 IPv6 NS address fetches 1 IPv4 NS address fetch failed 1 IPv6 NS address fetch failed 4 DNSSEC validation attempted 3 DNSSEC validation succeeded 1 DNSSEC NX validation succeeded 152 queries with RTT 10-100ms 40 queries with RTT 100-500ms [View: _bind] ++ Cache DB RRsets ++ [View: internal (Cache: internal)] 2007 A 652 NS 131 CNAME 1 MX 32 TXT 421 AAAA 28 DS 244 RRSIG 110 NSEC 3 DNSKEY 2 !A 2 !TXT 89 !AAAA 2 !SPF 14 !DLV 148 NXDOMAIN [View: external (Cache: external)] 55 A 12 NS 34 AAAA 2 DS 10 RRSIG 1 DNSKEY [View: _bind (Cache: _bind)] ++ Socket I/O Statistics ++ 82958 UDP/IPv4 sockets opened 2118 UDP/IPv6 sockets opened 4 TCP/IPv4 sockets opened 1 TCP/IPv6 sockets opened 82956 UDP/IPv4 sockets closed 2117 UDP/IPv6 sockets closed 58 TCP/IPv4 sockets closed 15 UDP/IPv4 socket bind failures 2117 UDP/IPv6 socket connect failures 29554 UDP/IPv4 connections established 59 TCP/IPv4 connections accepted 2117 UDP/IPv6 send errors 5 UDP/IPv4 recv errors ++ Per Zone Query Statistics ++ --- Statistics Dump --- (1352931389)

  Read the article

• How to move a ruby on rails application to a new server

  - by ManiacZX

  I have a rails app on an old Ubuntu server I need to move onto a new machine. I haven't worked with ruby on rails so I don't really know anything about the structure of the app. I want to load this onto an Ubuntu 8.04 AMI on Amazon EC2 and am looking for any information regarding the migration process such as: Do I copy over the entire folder defined as the application root in the mongrel config (for ex: /u/apps/myapp/current) or just certain folders? Am I looking for trouble if I go with the latest versions of ruby and the various gems? Any general gotchas to look out for in the process. Current server information: root@webnode001:/# cat /proc/version Linux version 2.6.15-27-server (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Dec 8 18:43:54 UTC 2006 root@webnode001:/# rails -v Rails 1.2.3 root@webnode001:/# mongrel_rails cluster::configure --version Version 1.0.1 root@webnode001:/# gem -v 0.9.0 root@webnode001:/# gem list -l *** LOCAL GEMS *** actionmailer (1.3.3, 1.2.5) Service layer for easy email delivery and testing. actionpack (1.13.3, 1.12.5) Web-flow and rendering framework putting the VC in MVC. actionwebservice (1.2.3, 1.1.6) Web service support for Action Pack. activerecord (1.15.3, 1.15.2, 1.14.4) Implements the ActiveRecord pattern for ORM. activesupport (1.4.2, 1.4.1, 1.3.1) Support and utility classes used by the Rails framework. cgi_multipart_eof_fix (2.1) Fix an exploitable bug in CGI multipart parsing which affects Ruby <= 1.8.5 when multipart boundary attribute contains a non-halting regular expression string. daemons (1.0.7, 1.0.5, 1.0.4, 1.0.2) A toolkit to create and control daemons in different ways eventmachine (0.7.2, 0.7.0) Ruby/EventMachine socket engine library fastercsv (1.2.0, 1.1.0) FasterCSV is CSV, but faster, smaller, and cleaner. fastthread (1.0) Optimized replacement for thread.rb primitives ferret (0.11.4) Ruby indexing library. gem_plugin (0.2.2, 0.2.1) A plugin system based only on rubygems that uses dependencies only mongrel (1.0.1, 0.3.13.4) A small fast HTTP library and server that runs Rails, Camping, Nitro and Iowa apps. mongrel_cluster (0.2.1) Mongrel plugin that provides commands and Capistrano tasks for managing multiple Mongrel processes. mysql (2.7) MySQL/Ruby provides the same functions for Ruby programs that the MySQL C API provides for C programs. piston (1.3.3) Piston is a utility that enables merge tracking of remote repositories. rails (1.2.3, 1.1.6) Web-application framework with template engine, control-flow layer, and ORM. rake (0.7.3, 0.7.1) Ruby based make-like utility. sources (0.0.1) This package provides download sources for remote gem installation swiftiply (0.5.1) A fast clustering proxy for web applications.

  Read the article

• GPO Software Uninstall Not Taking Place

  - by burmat

  I am having some trouble with my software GPO's and can't seem to find any answers using Google. I successfully deployed software using my policy but when I delete another, the uninstallation of the software does not take place. What I did: Deployed software using a GPO, used gpupdate /force on the workstation to update, reboot, and install the software Deleted another software installation by: Right-Click All Tasks Remove 'Immediately uninstall the software from users and computers' From there, I did another gpupdate /force to try and get the GPO to refresh and uninstall the software on the workstation. This did not work. I then forced replication between my domain controllers and ran another gpupdate /force on the workstation and this did not uninstall the software. There are not error logs or indications that the uninstall is being triggered when I go into the event viewer, and I know for a fact that the policy is working in other aspects. So my questions is: Where do I look next to find the answer as to why GPO software deployments are working but un-installations are not, based off of what I have already tried? Thank you in advance. UPDATE: After using gpresult /z, there is no indication of a pending un-installation or removal of software. Under the section entitled "Software Installations", the software I am trying to uninstall is not listed. There is no other indication that the software I am trying to uninstall even exists. I also turned on RSoP logging and did (yet another) gpupdate /force to yield no blatant results. There is no indication that an uninstall event was even triggered, let alone incapability or failure. Although I am sure I marked it to uninstall in case of two events (the falling out of the scope of management, as well as the removal of the entry), I am beginning to think the entry just never triggered something that should have been triggered. UPDATE #2: After troubleshooting this (frustrating) application assignment, I have chalked it up as a fluke. I have tested with other software to make sure that the uninstall of other application assignments is actually working, so I am assuming it is something related to the package directly. There is the possibility that my problem resides in something related to what @joeqwerty linked in a comment below but because I can't go back in time, I don't think I will be able to prove it. I will probably be running a script via another GPO to guarantee the un-installation of left over package installs. For now, Evan Anderson is getting the answer because of the debugging information I was able to put to good use. Thank you to everyone that helped contribute so far!

  Read the article

• Postmaster uses excessive CPU and Disk Writes

  - by wolfcastle

  using PostgreSQL 9.1.2 I'm seeing excessive CPU usage and large amounts of writes to disk from postmaster tasks. This happens even while my application is doing almost nothing (10s of inserts per MINUTE). There are a reasonable number of connections open however. I've been trying to determine what in my application is causing this. I'm pretty newb with postgresql, and haven't gotten anywhere so far. I've turned on some logging options in my config file, and looked at connections in the pg_stat_activity table, but they are all idle. Yet each connection consumes ~ 50% CPU, and is writing ~15M/s to disk (reading nothing). I'm basically using the stock postgresql.conf with very little tweaks. I'd appreciate any advice or pointers on what I can do to track this down. Here is a sample of what top/iotop is showing me: Cpu(s): 18.9%us, 14.4%sy, 0.0%ni, 53.4%id, 11.8%wa, 0.0%hi, 1.5%si, 0.0%st Mem: 32865916k total, 7263720k used, 25602196k free, 575608k buffers Swap: 16777208k total, 0k used, 16777208k free, 4464212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17057 postgres 20 0 236m 33m 13m R 45.0 0.1 73:48.78 postmaster 17188 postgres 20 0 219m 15m 11m R 42.3 0.0 61:45.57 postmaster 17963 postgres 20 0 219m 16m 11m R 42.3 0.1 27:15.01 postmaster 17084 postgres 20 0 219m 15m 11m S 41.7 0.0 63:13.64 postmaster 17964 postgres 20 0 219m 17m 12m R 41.7 0.1 27:23.28 postmaster 18688 postgres 20 0 219m 15m 11m R 41.3 0.0 63:46.81 postmaster 17088 postgres 20 0 226m 24m 12m R 41.0 0.1 64:39.63 postmaster 24767 postgres 20 0 219m 17m 12m R 41.0 0.1 24:39.24 postmaster 18660 postgres 20 0 219m 14m 9.9m S 40.7 0.0 60:51.52 postmaster 18664 postgres 20 0 218m 15m 11m S 40.7 0.0 61:39.61 postmaster 17962 postgres 20 0 222m 19m 11m S 40.3 0.1 11:48.79 postmaster 18671 postgres 20 0 219m 14m 9m S 39.4 0.0 60:53.21 postmaster 26168 postgres 20 0 219m 15m 10m S 38.4 0.0 59:04.55 postmaster Total DISK READ: 0.00 B/s | Total DISK WRITE: 195.97 M/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 17962 be/4 postgres 0.00 B/s 14.83 M/s 0.00 % 0.25 % postgres: aggw aggw [local] idle 17084 be/4 postgres 0.00 B/s 15.53 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17963 be/4 postgres 0.00 B/s 15.00 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17188 be/4 postgres 0.00 B/s 14.80 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 17964 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.24 % postgres: aggw aggw [local] idle 18664 be/4 postgres 0.00 B/s 15.13 M/s 0.00 % 0.23 % postgres: aggw aggw [local] idle 17088 be/4 postgres 0.00 B/s 14.71 M/s 0.00 % 0.13 % postgres: aggw aggw [local] idle 18688 be/4 postgres 0.00 B/s 14.72 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 24767 be/4 postgres 0.00 B/s 14.93 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18671 be/4 postgres 0.00 B/s 16.14 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 17057 be/4 postgres 0.00 B/s 13.58 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 26168 be/4 postgres 0.00 B/s 15.50 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle 18660 be/4 postgres 0.00 B/s 15.85 M/s 0.00 % 0.00 % postgres: aggw aggw [local] idle

  Read the article

• ffmpeg not using all cores

  - by user2783132

  I just got my new server with two intel e5-2695 but I was shocked to see that ffmpeg or ubuntu doesn't utilize all cores. top while ffmpeg was running top - 23:35:25 up 2:41, 2 users, load average: 5.35, 4.37, 3.12 Tasks: 333 total, 2 running, 331 sleeping, 0 stopped, 0 zombie %Cpu0 : 0.0 us, 1.0 sy, 35.6 ni, 63.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu1 : 0.0 us, 0.7 sy, 35.5 ni, 63.9 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu2 : 0.0 us, 0.7 sy, 33.4 ni, 65.9 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu3 : 0.0 us, 0.0 sy, 32.7 ni, 67.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu4 : 0.0 us, 0.3 sy, 32.3 ni, 67.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu5 : 0.0 us, 0.3 sy, 33.0 ni, 66.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu6 : 0.0 us, 0.0 sy, 32.6 ni, 67.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu7 : 0.0 us, 0.3 sy, 32.7 ni, 67.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu8 : 0.0 us, 0.7 sy, 32.6 ni, 66.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu9 : 0.0 us, 0.3 sy, 33.9 ni, 65.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu10 : 0.0 us, 0.0 sy, 35.0 ni, 65.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu11 : 0.0 us, 0.7 sy, 30.0 ni, 69.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu12 : 21.1 us, 0.0 sy, 0.0 ni, 78.9 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu13 : 0.7 us, 0.0 sy, 4.3 ni, 95.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu14 : 0.3 us, 0.0 sy, 5.0 ni, 94.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu15 : 24.9 us, 0.0 sy, 0.0 ni, 75.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu16 : 0.3 us, 0.0 sy, 3.7 ni, 96.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu17 : 0.7 us, 0.3 sy, 4.9 ni, 94.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu18 : 1.0 us, 0.0 sy, 4.6 ni, 94.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu19 : 0.7 us, 0.0 sy, 4.7 ni, 94.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu20 : 11.1 us, 0.0 sy, 0.0 ni, 88.9 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu21 : 1.3 us, 0.0 sy, 4.6 ni, 94.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu22 : 2.0 us, 0.3 sy, 4.3 ni, 93.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu23 : 96.7 us, 1.0 sy, 0.0 ni, 2.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu24 : 0.0 us, 0.0 sy, 0.7 ni, 99.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu25 : 0.0 us, 0.0 sy, 3.0 ni, 97.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu26 : 0.0 us, 0.0 sy, 1.3 ni, 98.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu27 : 0.0 us, 0.0 sy, 4.0 ni, 96.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu28 : 0.0 us, 0.0 sy, 1.7 ni, 98.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu29 : 0.0 us, 0.0 sy, 1.7 ni, 98.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu30 : 0.0 us, 0.0 sy, 1.7 ni, 98.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu31 : 0.0 us, 0.0 sy, 1.0 ni, 99.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu32 : 0.0 us, 0.0 sy, 0.7 ni, 99.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu33 : 0.0 us, 0.0 sy, 1.7 ni, 98.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu34 : 0.0 us, 0.0 sy, 2.0 ni, 98.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu35 : 0.0 us, 0.0 sy, 1.0 ni, 99.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st %Cpu36 : 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st ffmpeg was sent with -threads 0 *I also tried sending ffmoeg with -threads 500- no difference

  Read the article

• Apache and MySQL taking all the memory? Maximum connections?

  - by lpfavreau

  I've a had one of our servers going down (network wise) but keeping its uptime (so looks the server is not losing its power) recently. I've asked my hosting company to investigate and I've been told, after investigation, that Apache and MySQL were at all time using 80% of the memory and peaking at 95% and that I might be needing to add some more RAM to the server. One of their justifications to adding more RAM was that I was using the default max connections setting (125 for MySQL and 150 for Apache) and that for handling those 150 simultaneous connections, I would need at least 3Gb of memory instead of the 1Gb I have at the moment. Now, I understand that tweaking the max connections might be better than me leaving the default setting although I didn't feel it was a concern at the moment, having had servers with the same configuration handle more traffic than the current 1 or 2 visitors before the lunch, telling myself I'd tweak it depending on the visits pattern later. I've also always known Apache was more memory hungry under default settings than its competitor such as nginx and lighttpd. Nonetheless, looking at the stats of my machine, I'm trying to see how my hosting company got those numbers. I'm getting: # free -m total used free shared buffers cached Mem: 1000 944 56 0 148 725 -/+ buffers/cache: 71 929 Swap: 1953 0 1953 Which I guess means that yes, the server is reserving around 95% of its memory at the moment but I also thought it meant that only 71 out of the 1000 total were really used by the applications at the moment looking a the buffers/cache row. Also I don't see any swapping: # vmstat 60 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 57612 151704 742596 0 0 1 1 3 11 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 1 1 24 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 2 1 18 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 0 1 13 0 0 100 0 And finally, while requesting a page: top - 08:33:19 up 3 days, 13:11, 2 users, load average: 0.06, 0.02, 0.00 Tasks: 81 total, 1 running, 80 sleeping, 0 stopped, 0 zombie Cpu(s): 1.3%us, 0.3%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024616k total, 976744k used, 47872k free, 151716k buffers Swap: 2000052k total, 0k used, 2000052k free, 742596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24914 www-data 20 0 26296 8640 3724 S 2 0.8 0:00.06 apache2 23785 mysql 20 0 125m 18m 5268 S 1 1.9 0:04.54 mysqld 24491 www-data 20 0 25828 7488 3180 S 1 0.7 0:00.02 apache2 1 root 20 0 2844 1688 544 S 0 0.2 0:01.30 init ... So, I'd like to know, experts of serverfault: Do I really need more RAM at the moment? How do they calculate that for 150 simultaneous connections I'd need 3Gb? Thanks for your help!

  Read the article

• Having troubles connectiong Magento to external Windows Database Server using Windows Azure

  - by Kevin H

  "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

  Read the article

• Complete Active Directory redesign and GPO application

  - by Wolfgang Kuehne

  after much testing and hundreds of tries and hours invested I decided to consult you experts here. Overview: I want to apply some GPO to our users which will add some specific site to the Trusted Sites in Internet Explorer settings for all users. However, the more I try the more confusing the results become. The GPO is either applied to one group of users, or to another one. Finally, I came to the conclusion that this weird behavior is cause rather by the poor organization in Users and Groups in Active Directory. As such I want to kick the problem from the root: Redesign the Active Directory Users and Groups. Scenario: There is one Domain Controller, and we use Terminal Services (so there is a Terminal Server as well). Users usually log on to the Terminal Server using Remote Desktop to perform their daily tasks. I would classify the users in the following way: IT: Admins, Software Development Business: Administration, Management The current structure of the Active Directory Users and Groups is a result of the previous IT management. The company has used Small Business Server which has created multiple default user groups and containers. Unfortunately, the guys working before me have do no documentation at all. Now, as I inherit this structure I am in the no mans land. No idea which direction to head first. As you can see, the Active Directory User and Groups have become a bit confusing. There is no SBS anymore, but when migrating from SBS to the current Windows Server 2008 R2 environment the guys before me have simply copied the same structure. The real question: Where should I start cleaning from, ensuring that I won't break totally the current infrastructure? What is a nice organization for the scenario that I have explained above? Possible useful info for the current structure: Computers folder contains Terminal Services Computers user group Members: TerminalServer computer located at Server -> Terminalserver OU Member of: NONE Foreign Security Principals : EMPTY Managed Service Accounts : EMPTY Microsoft Exchange Security Groups : not sure if needed, our emails are administered by external service provider Distribution Groups : not sure if needed Security Groups : there are couple of groups which are needed SBS users : contains all the users Terminalserver : contains only the TerminalServer machine

  Read the article

• Disk IO causing high load on Xen/CentOS guest

  - by Peter Lindqvist

  I'm having serious issues with a xen based server, this is on the guest partition. It's a paravirtualized CentOS 5.5. The following numbers are taken from top while copying a large file over the network. If i copy the file another time the speed decreases in relation to load average. So the second time it's half the speed of the first time. It needs some time to cool off after this. Load average slowly decreases until it's once again usable. ls / takes about 30 seconds. top - 13:26:44 up 13 days, 21:44, 2 users, load average: 7.03, 5.08, 3.15 Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.1%sy, 0.0%ni, 25.3%id, 74.5%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1048752k total, 1041460k used, 7292k free, 3116k buffers Swap: 2129912k total, 40k used, 2129872k free, 904740k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1506 root 10 -5 0 0 0 S 0.3 0.0 0:03.94 cifsd 1 root 15 0 2172 644 556 S 0.0 0.1 0:00.08 init Meanwhile the host is ~0.5 load avg and steady over time. ~50% wait Server hardware is dual xeon, 3gb ram, 170gb scsi 320 10k rpm, and shouldn't have any problems with copying files over the network. disk = [ "tap:aio:/vm/dev01.img,xvda,w" ] I also get these in the log INFO: task syslogd:1350 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syslogd D 00062E4F 2208 1350 1 1353 1312 (NOTLB) c0ef0ed0 00000286 6e71a411 00062e4f c0ef0f18 00000009 c0f20000 6e738bfd 00062e4f 0001e7ec c0f2010c c181a724 c1abd200 00000000 ffffffff c0ef0ecc c041a180 00000000 c0ef0ed8 c03d6a50 00000000 00000000 c03d6a00 00000000 Call Trace: [<c041a180>] __wake_up+0x2a/0x3d [<ee06a1ea>] log_wait_commit+0x80/0xc7 [jbd] [<c043128b>] autoremove_wake_function+0x0/0x2d [<ee065661>] journal_stop+0x195/0x1ba [jbd] [<c0490a32>] __writeback_single_inode+0x1a3/0x2af [<c04568ea>] do_writepages+0x2b/0x32 [<c045239b>] __filemap_fdatawrite_range+0x66/0x72 [<c04910ce>] sync_inode+0x19/0x24 [<ee09b007>] ext3_sync_file+0xaf/0xc4 [ext3] [<c047426f>] do_fsync+0x41/0x83 [<c04742ce>] __do_fsync+0x1d/0x2b [<c0405413>] syscall_call+0x7/0xb ======================= I have tried disabling irqbalanced as suggested here but it does not seem to make any difference.

  Read the article

• centos 6 ps aux hangs up

  - by Guntis

  I have problem with my server. Server is running centos 6 (CloudLinux Server release 6.2). uname -a = 2.6.32-320.4.1.lve1.1.4.el6.x86_64 That is a kvm guest. On host is debian 6. If i run command ps aux, it stuck on random process (shows some processes only), top command is working fine. htop doesn't work too (black screen). top - 12:11:51 up 34 min, 1 user, load average: 4.26, 6.71, 16.15 Tasks: 201 total, 7 running, 192 sleeping, 0 stopped, 2 zombie Cpu(s): 7.9%us, 2.8%sy, 0.0%ni, 87.5%id, 1.6%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 9862044k total, 2359484k used, 7502560k free, 171720k buffers Swap: 10485720k total, 0k used, 10485720k free, 1336872k cached server has one Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, free -m total used free shared buffers cached Mem: 9630 2336 7293 0 170 1324 -/+ buffers/cache: 841 8789 Swap: 10239 0 10239 php -v PHP 5.3.19 (cli) (built: Nov 28 2012 10:03:07) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies with the ionCube PHP Loader v4.2.2, Copyright (c) 2002-2012, by ionCube Ltd., and with Zend Guard Loader v3.3, Copyright (c) 1998-2010, by Zend Technologies with Suhosin v0.9.33, Copyright (c) 2007-2012, by SektionEins GmbH mysql Server version: 5.1.63-cll php -i disable_functions => apache_child_terminate, apache_setenv, define_syslog_variables, escapeshellarg, escapeshellcmd, eval, exec, fp, fput, ftp_connect, ftp_e xec, ftp_get, ftp_login, ftp_nb_fput, ftp_put, ftp_raw, ftp_rawlist, highlight_file, ini_alter, ini_get_all, ini_restore, inject_code, openlog, passthru, php _uname, phpAds_remoteInfo, phpAds_XmlRpc, phpAds_xmlrpcDecode, phpAds_xmlrpcEncode, popen, posix_getpwuid, posix_kill, posix_mkfifo, posix_setpgid, posix_set sid, posix_setuid, posix_setuid, posix_uname, proc_close, proc_get_status, proc_nice, proc_open, proc_terminate, shell_exec, syslog, system, xmlrpc_entity_de code, xmlrpc_server_create, putenv, show_source,mail => apache_child_terminate, apache_setenv, define_syslog_variables, escapeshellarg, escapeshellcmd, eval, exec, fp, fput, ftp_connect, ftp_exec, ftp_get, ftp_login, ftp_nb_fput, ftp_put, ftp_raw, ftp_rawlist, highlight_file, ini_alter, ini_get_all, ini_restore, inject_code, openlog, passthru, php_uname, phpAds_remoteInfo, phpAds_XmlRpc, phpAds_xmlrpcDecode, phpAds_xmlrpcEncode, popen, posix_getpwuid, posix_kill, pos ix_mkfifo, posix_setpgid, posix_setsid, posix_setuid, posix_setuid, posix_uname, proc_close, proc_get_status, proc_nice, proc_open, proc_terminate, shell_exe c, syslog, system, xmlrpc_entity_decode, xmlrpc_server_create, putenv, show_source,mail ... suhosin.executor.disable_eval => Off => Off suhosin.executor.eval.blacklist => include,include_once,require,require_once,curl_init,fpassthru,base64_encode,base64_decode,mail,exec,system,proc_open,leak, syslog,pfsockopen,shell_exec,ini_restore,symlink,stream_socket_server,proc_nice,popen,proc_get_status,dl, pcntl_exec, pcntl_fork, pcntl_signal,pcntl_waitpid, pcntl_wexitstatus, pcntl_wifexited, pcntl_wifsignaled,pcntl_wifstopped, pcntl_wstopsig, pcntl_wtermsig, socket_accept,socket_bind, socket_connect, socket_cr eate, socket_create_listen,socket_create_pair,link,register_shutdown_function,register_tick_function,gzinflate => include,include_once,require,require_once,c url_init,fpassthru,base64_encode,base64_decode,mail,exec,system,proc_open,leak,syslog,pfsockopen,shell_exec,ini_restore,symlink,stream_socket_server,proc_nic e,popen,proc_get_status,dl, pcntl_exec, pcntl_fork, pcntl_signal,pcntl_waitpid, pcntl_wexitstatus, pcntl_wifexited, pcntl_wifsignaled,pcntl_wifstopped, pcntl _wstopsig, pcntl_wtermsig, socket_accept,socket_bind, socket_connect, socket_create, socket_create_listen,socket_create_pair,link,register_shutdown_function, register_tick_function,gzinflate Sometimes i cannot kill httpd process. I run kill -9 PID even several times, and nothing happens. php runs via suphp. I learned somewhere that it can be trojan. I ran strace ps aux and it stops on open("/proc/PID/cmdline", O_RDONLY) If i reboot server, problem is gone but after some time it is back again .. :( Thanks.

  Read the article

• How should I set up my Hyper-V server and network topology?

  - by Daniel Waechter

  This is my first time setting up either Hyper-V or Windows 2008, so please bear with me. I am setting up a pretty decent server running Windows Server 2008 R2 to be a remote (colocated) Hyper-V host. It will be hosting Linux and Windows VMs, initially for developers to use but eventually also to do some web hosting and other tasks. Currently I have two VMs, one Windows and one Ubuntu Linux, running pretty well, and I plan to clone them for future use. Right now I'm considering the best ways to configure developer and administrator access to the server once it is moved into the colocation facility, and I'm seeking advice on that. My thought is to set up a VPN for access to certain features of the VMs on the server, but I have a few different options for going about this: Connect the server to an existing hardware firewall (an old-ish Netscreen 5-GT) that can create a VPN and map external IPs to the VMs, which will have their own IPs exposed through the virtual interface. One problem with this choice is that I'm the only one trained on the Netscreen, and its interface is a bit baroque, so others may have difficulty maintaining it. Advantage is that I already know how to do it, and I know it will do what I need. Connect the server directly to the network and configure the Windows 2008 firewall to restrict access to the VMs and set up a VPN. I haven't done this before, so it will have a learning curve, but I'm willing to learn if this option is better long-term than the Netscreen. Another advantage is that I won't have to train anyone on the Netscreen interface. Still, I'm not certain if the capabilities of the Windows software firewall as far as creating VPNs, setting up rules for external access to certain ports on the IPs of Hyper-V servers, etc. Will it be sufficient for my needs and easy enough to set up / maintain? Anything else? What are the limitations of my approaches? What are the best practices / what has worked well for you? Remember that I need to set up developer access as well as consumer access to some services. Is a VPN even the right choice?

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >