Search Results

Search found 5701 results on 229 pages for 'cpu cooler'.

Page 182/229 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Strange performance issue with Dell R7610 and LSI 2208 RAID controller

  - by GregC

  Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

  Read the article

• what can be causes of http server crash?

  - by mithunmo

  Hello , I am using WAMP server on Windows XP. Apache 2.2.11 MySQL 5.1.36 (INNODB engine) PHP 5.3.0 I observe that my WAMP server crashes in the following scenarios IF I use a Low end PC ( low processor speed and low RAM) After making some changes to httpd.conf file .For eg changing the Allow from IP address . But here it crashes only once and then it starts to work fine. Random crashes CRASH LOG szAppName : httpd.exe szAppVer : 2.2.11.0 szModName : php5ts.dll szModVer : 5.3.0.0 offset : 0000c309 C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\httpd.exe.mdmp C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\appcompat.txt My questions Does high CPU utilization/LOW RAM can also cause the HTTP server to crash ? excessive file reading as in every 10 seconds ? unlimited script execution time . I have set the maximum execution time in php script to 0 as my script has to execute for sometimes 2-3 days. Is there any way to avoid this ? Access to Database ? Should we use lock before reading and writing Can these be the reasons for random wamp server crashes ? OR is is some other programming error ? Please guide me . Regards, Mithun

  Read the article

• How do I improve my incremental-backup performance?

  - by Alistair Bell

  I'm currently using the traditional rsync+cp -al method to create incremental/snapshot backups of our server tree. The backups are going onto a pair of eight-disk towers connected to the backup machine (a Sandy Bridge machine with 16 GB of RAM, running CentOS 5.5) via four eSATA connections (four disks per connection). Each disk is a regular 2 TB disk, so we have 32 TB of disk space connected to the backup machine. We're backing up about 20 TB of data on the servers with this. The problem is that each daily backup is taking more than 24 hours, and the real time-killer isn't the actual rsync, but the time it takes to perform a cp -al of the tree locally on the backup machine. It's taking more than 12 hours just to make the shadow copy of the tree, and as far as I can tell the performance backlog is at the disk (top shows the cp using a lot of RAM but not a lot of CPU and mostly in uninterruptible-sleep state) We have the server data split into four major volumes (and a few minor ones), and each of these backups runs in parallel (with some offsets in the cron to try to get some disks' cp done first). There are two volumes on the backup drive, both striped LVM volumes of 16 TB each. So obviously I need to improve the performance because it's unusable as it stands. The first question is: when CentOS 6 comes out, with support for btrfs, will making snapshots of subvolumes with btrfs substantially increase this performance? The second is: is there a way, with ext3 or something else supported in CentOS 5 or 6, to 'encourage' it to put the directories/inodes in one part of a volume (which could happen to be the part that's on an SSD, via LVM) and the files in another? That would presumably solve the problem, but I don't know of ways to hint ext3 like that.

  Read the article

• Nagios plug-in check_snmp receives NO SNMP data from a CISCO Router

  - by Shehryar

  I have tried setting up Nagios on Ubuntu 10.10, successfully installed and can login to web interface, I am however stuck on configuring snmp or I am doing something wrong here, i have followed various sites / nagios wiki to setup configuration (cfg) files. When I check on the web interface, it gives the following error on one of my cisco router: Current Status: UNKNOWN (for 0d 2h 55m 56s) Status Information: SNMP problem - No data received from host CMD: /usr/bin/snmpget -t 1 -r 5 -m RFC1213-MIB -v 1 [authpriv] 192.168.1.1:161 ifOperStatus.1 On the command-line itself, when I type the following, it just sits there waiting and waiting : sudo /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C Routers -o sysUpTime.0 When I type the following command : I get an OK /usr/bin/snmpget -v1 192.168.1.1:161 1.3.6.1.2.1.1.5.0 -c "Routers" I have configured SNMP properly on our cisco device as we can collect SNMP Data via two other monitoring tool (SolarWinds and Manage Engine), we are tempted towards Nagios as its opensource. Will be grateful if someone could assist in rectifying this situation and guide me with setting up nagios to monitor Cisco Routers, Switches and a Few Servers. We want to monitor Bandwidth, cpu utilization, uptime and other necessary counters. Will be grateful for your assistance Thanks for reading Shehryar

  Read the article

• Slow VM on esxi 4.1

  - by user57432

  We have a FreeBSD 64bit running on a esxi 4.1, the hardware platform is a DELL R710 with 2 x 56xx (intel 6core cpu) and 48 GB ram. The FreeBSD vm is very slow, when we compiles/builds something on it, it takes 5 minuts and it says "build time 18 seconds.". There's no vmtools installed on the vm. The same vm is installaed on another R710 running esxi 4.0 for dell and there's no problems with that one. Does anyone have any idea about what to look for? the VMs on the second server (ESXi 4.1) is a clone of the VMs running on the first VMserver (ESXi 4.0 Dell edition). It's not possible for me to move the VM back to the first server since the file contaning the vm is too big. We installed the new esxi with a datasore with 8mb blocks because 1mb blocks dident allow for the file size we needed. It looks like the www server on the new ESXi 4.1 works fine, but I havent really tested it. There's not installed vmtools on any of the VMs (FreeBSD). The block size on the second VM (ESXi 4.1) datastorage is 8mb and 1mb on the first (ESXi 4.0)

  Read the article

• Improving Performance of RDP Over LAN

  - by Jared Brown

  Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

  Read the article

• fail2ban Error Gentoo

  - by Mark Davidson

  Hi All I've recently setup a new VPS running Gentoo (My first time using the distro so please forgive me is this is a really easy one) and as I've done with other servers installed fail2ban. Setting it up to block the host via iptables, on too many unsuccessful logins with ssh. However I'm getting a strange error that I can't quite solve. When I start fail2ban I get these lines in the error log 2009-11-13 18:02:01,290 fail2ban.jail : INFO Jail 'ssh-iptables' started 2009-11-13 18:02:01,480 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 If I try and force a ban these errors show up in the log and the host is not banned 2009-11-13 11:23:26,905 fail2ban.actions: WARNING [ssh-iptables] Ban XXX.XXX.XXX.XXX 2009-11-13 11:23:26,929 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:26,930 fail2ban.actions.action: ERROR Invariant check failed. Trying to restore a sane environment 2009-11-13 11:23:27,007 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: CRITICAL Unable to restore environment My versions are as follows Linux masked 2.6.18-xen-r12 #2 SMP Wed Mar 4 11:45:03 GMT 2009 x86_64 Intel(R) Xeon(R) CPU E5504 @ 2.00GHz GenuineIntel GNU/Linux net-analyzer/fail2ban-0.8.4 net-firewall/iptables-1.4.3.2 If anyone could shead some light on these errors that would be great, I did wonder if it was a problem with iptables or some kernel modules but I can block an IP if I do. iptables -I INPUT -s 25.55.55.55 -j DROP so makes me think its something a bit more unusual. Thanks a lot in advance

  Read the article

• How to diagnose frequent segfaults

  - by Andreas Gohr

  My server is logging frequent segmentation faults to /var/log/kern.log in different tools. So far I've seen them in Perl, PHP and rsync. All installed software is up-to-date Debian packages. Here's an exerpt from the log file: Mar 2 01:07:54 gaz kernel: [ 5316.246303] imapsync[4533]: segfault at 8b ip 00007fb448c98fe6 sp 00007ffff571dd68 error 4 in libperl.so.5.10.1[7fb448bd7000+164000] Mar 2 01:17:42 gaz kernel: [ 5904.354307] php5-cgi[4441]: segfault at 2bb3dc8 ip 0000000002bb3dc8 sp 00007fffbeeaae48 error 15 Mar 2 02:54:05 gaz kernel: [11687.922316] php5-cgi[4495]: segfault at 2d7acf9 ip 0000000002d7acf9 sp 00007fff60c6eb18 error 15 Mar 2 10:50:08 gaz kernel: [40250.390322] BUG: unable to handle kernel paging request at 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.390341] IP: [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390353] PGD 208c71067 PUD 21c811067 PMD 209329067 PTE 8000000211c88067 Mar 2 10:50:08 gaz kernel: [40250.390365] Oops: 0011 [#1] SMP Mar 2 10:50:08 gaz kernel: [40250.390373] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 2 10:50:08 gaz kernel: [40250.390386] CPU 1 Mar 2 10:50:08 gaz kernel: [40250.390392] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd _hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_m ce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 2 10:50:08 gaz kernel: [40250.390566] Pid: 11482, comm: munin-limits Not tainted 2.6.32-5-amd64 #1 MS-7368 Mar 2 10:50:08 gaz kernel: [40250.390576] RIP: 0010:[<00000000024b03f0>] [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390586] RSP: 0018:ffff88021cc8dec0 EFLAGS: 00010286 Mar 2 10:50:08 gaz kernel: [40250.390593] RAX: 000000001ddc1000 RBX: 0000000000000010 RCX: ffffffff810f9904 Mar 2 10:50:08 gaz kernel: [40250.390600] RDX: 0000000000000000 RSI: ffffea0007688200 RDI: 0000000000000286 Mar 2 10:50:08 gaz kernel: [40250.390608] RBP: 00000000ffffffea R08: 0000000000000025 R09: 7865542f30312e35 Mar 2 10:50:08 gaz kernel: [40250.390615] R10: 000000d01cc8ddf8 R11: 0000000000000246 R12: ffff88021cc8def8 Mar 2 10:50:08 gaz kernel: [40250.390622] R13: 0000000002295010 R14: 00000000022c9db0 R15: 0000000002488d78 Mar 2 10:50:08 gaz kernel: [40250.390630] FS: 00007f3b3c8b2700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390641] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 2 10:50:08 gaz kernel: [40250.390648] CR2: 00000000024b03f0 CR3: 000000021c5d1000 CR4: 00000000000006e0 Mar 2 10:50:08 gaz kernel: [40250.390656] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 2 10:50:08 gaz kernel: [40250.390663] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 2 10:50:08 gaz kernel: [40250.390671] Process munin-limits (pid: 11482, threadinfo ffff88021cc8c000, task ffff88021bf59530) Mar 2 10:50:08 gaz kernel: [40250.390681] Stack: Mar 2 10:50:08 gaz kernel: [40250.390687] ffffffff810f1d4a ffff880208c63228 0000000000000000 00007fffc2dcecc0 Mar 2 10:50:08 gaz kernel: [40250.390697] <0> 00000000024ba2b0 0000000002295010 ffffffff810f1e3d 0000000000000004 Mar 2 10:50:08 gaz kernel: [40250.390712] <0> ffff88021bf59530 ffff88021c4edc00 ffffffff812fe0b6 ffff88021c4edc60 Mar 2 10:50:08 gaz kernel: [40250.390732] Call Trace: Mar 2 10:50:08 gaz kernel: [40250.390742] [<ffffffff810f1d4a>] ? vfs_fstatat+0x2c/0x57 Mar 2 10:50:08 gaz kernel: [40250.390750] [<ffffffff810f1e3d>] ? sys_newstat+0x11/0x30 Mar 2 10:50:08 gaz kernel: [40250.390760] [<ffffffff812fe0b6>] ? do_page_fault+0x2e0/0x2fc Mar 2 10:50:08 gaz kernel: [40250.390768] [<ffffffff812fbf55>] ? page_fault+0x25/0x30 Mar 2 10:50:08 gaz kernel: [40250.390777] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 2 10:50:08 gaz kernel: [40250.390783] Code: Bad RIP value. Mar 2 10:50:08 gaz kernel: [40250.390791] RIP [<00000000024b03f0>] 0x24b03f0 Mar 2 10:50:08 gaz kernel: [40250.390799] RSP <ffff88021cc8dec0> Mar 2 10:50:08 gaz kernel: [40250.390805] CR2: 00000000024b03f0 Mar 2 10:50:08 gaz kernel: [40250.391051] ---[ end trace 1cc1473b539c7f6e ]--- Mar 2 11:42:20 gaz kernel: [43382.242301] php5-cgi[10963]: segfault at d81160 ip 0000000000d81160 sp 00007fff3adcb058 error 15 Mar 2 21:51:14 gaz kernel: [79916.418302] php5-cgi[20089]: segfault at 1c59dc8 ip 0000000001c59dc8 sp 00007fff9b877fb8 error 15 Mar 3 03:45:01 gaz kernel: [101143.334305] munin-update[22519] general protection ip:7f516dce204c sp:7fff6049a978 error:0 in libperl.so.5.10.1[7f516dc7d000+164000] Mar 3 11:22:37 gaz kernel: [128599.570307] php5-cgi[22888]: segfault at 36485a8 ip 00000000036485a8 sp 00007fff2d56e1c8 error 15 Mar 4 08:32:17 gaz kernel: [204779.842304] php5-cgi[22090]: segfault at 18 ip 0000000000689e5e sp 00007fff677a6a48 error 6 in php5-cgi[400000+6f9000] Mar 4 10:01:02 gaz kernel: [210104.434706] rsync[22236] general protection ip:7f14a07137f9 sp:7fff88f940b8 error:0 in libc-2.11.2.so[7f14a069d000+158000] Mar 4 11:32:22 gaz kernel: [215584.262316] BUG: unable to handle kernel paging request at 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262331] IP: [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262343] PGD 0 Mar 4 11:32:22 gaz kernel: [215584.262350] Oops: 0010 [#2] SMP Mar 4 11:32:22 gaz kernel: [215584.262359] last sysfs file: /sys/devices/pci0000:00/0000:00:12.0/host4/target4:0:0/4:0:0:0/block/sdb/stat Mar 4 11:32:22 gaz kernel: [215584.262371] CPU 1 Mar 4 11:32:22 gaz kernel: [215584.262378] Modules linked in: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative xt_recent xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter ip6_tables xt_DSCP xt_TCPMSS ipt_LOG ipt_REJECT iptable_mangle iptable_filter xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack ip_tables x_tables loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit shpchp i2c_piix4 edac_core pcspkr k8temp evdev edac_mce_amd pci_hotplug i2c_core button ext3 jbd mbcache dm_mod powernow_k8 aacraid 3w_9xxx 3w_xxxx raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 md_mod sata_nv sata_sil sata_via sd_mod crc_t10dif ata_generic ahci pata_atiixp ohci_hcd libata r8169 mii thermal ehci_hcd processor thermal_sys scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Mar 4 11:32:22 gaz kernel: [215584.262552] Pid: 1960, comm: proxymap Tainted: G D 2.6.32-5-amd64 #1 MS-7368 Mar 4 11:32:22 gaz kernel: [215584.262563] RIP: 0010:[<00000000ffffff9c>] [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262573] RSP: 0018:ffff880209257e00 EFLAGS: 00010212 Mar 4 11:32:22 gaz kernel: [215584.262580] RAX: ffff8801514eb780 RBX: ffffffff810efb2d RCX: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262590] RDX: 0000000000000020 RSI: 0000000000000001 RDI: ffff8801514eb780 Mar 4 11:32:22 gaz kernel: [215584.262600] RBP: 00000000ffffffe9 R08: 0000000000000000 R09: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262611] R10: ffff880209257e78 R11: ffffffff81152c7c R12: 0000000000000001 Mar 4 11:32:22 gaz kernel: [215584.262622] R13: 0000000000008001 R14: 0000000000000024 R15: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.262633] FS: 00007fca4de35700(0000) GS:ffff880008d00000(0000) knlGS:0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 4 11:32:22 gaz kernel: [215584.262650] CR2: 00000000ffffff9c CR3: 00000001c9cbb000 CR4: 00000000000006e0 Mar 4 11:32:22 gaz kernel: [215584.262661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 4 11:32:22 gaz kernel: [215584.262671] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 4 11:32:22 gaz kernel: [215584.262682] Process proxymap (pid: 1960, threadinfo ffff880209256000, task ffff88021c4b1c40) Mar 4 11:32:22 gaz kernel: [215584.262693] Stack: Mar 4 11:32:22 gaz kernel: [215584.262698] ffffffff810f8566 ffff880209257e78 ffff88021c7bf000 ffff88021c7bf0c8 Mar 4 11:32:22 gaz kernel: [215584.262709] <0> 0000800000000000 ffff88021fc0f000 ffff880209257e78 00000000fffffffe Mar 4 11:32:22 gaz kernel: [215584.262724] <0> ffffffff810e5881 ffff880209257f48 0000000000000286 ffff88021fc0f000 Mar 4 11:32:22 gaz kernel: [215584.262743] Call Trace: Mar 4 11:32:22 gaz kernel: [215584.262753] [<ffffffff810f8566>] ? do_filp_open+0xa7/0x94b Mar 4 11:32:22 gaz kernel: [215584.262763] [<ffffffff810e5881>] ? virt_to_head_page+0x9/0x2a Mar 4 11:32:22 gaz kernel: [215584.262771] [<ffffffff810f9904>] ? user_path_at+0x52/0x79 Mar 4 11:32:22 gaz kernel: [215584.262779] [<ffffffff810cfec1>] ? get_unmapped_area+0xd7/0x139 Mar 4 11:32:22 gaz kernel: [215584.262787] [<ffffffff811019d5>] ? alloc_fd+0x67/0x10c Mar 4 11:32:22 gaz kernel: [215584.262795] [<ffffffff810eceaf>] ? do_sys_open+0x55/0xfc Mar 4 11:32:22 gaz kernel: [215584.262804] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b Mar 4 11:32:22 gaz kernel: [215584.262811] Code: Bad RIP value. Mar 4 11:32:22 gaz kernel: [215584.262819] RIP [<00000000ffffff9c>] 0xffffff9c Mar 4 11:32:22 gaz kernel: [215584.262828] RSP <ffff880209257e00> Mar 4 11:32:22 gaz kernel: [215584.262833] CR2: 00000000ffffff9c Mar 4 11:32:22 gaz kernel: [215584.263077] ---[ end trace 1cc1473b539c7f6f ]--- As you can see there are segfaults, a general protection fault and a Kernel Oops. My first guess was that there's a Hardware problem of some sort and I asked my Hoster (it's a rented root server) to do a full hardwarecheck - they did, but couldn't find any problem. I don't know what and how they checked but their support team is usually quite good. I ran memtester and cpuburn myself and couldn't find any error either. Unfortunately I have no reliable way to reproduce these segfaults, they seem to be more or less random. On a hunch I disabled the firewall of the system and ran one of the programs that segfaulted regularily (imapsync) and it seemed to take longer to segfault than before, so the problem might be related to the network stack. Or could just be a random thing. Here are the kernel specs: # uname -a Linux gaz 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 GNU/Linux # cat /etc/debian_version 6.0 # lsmod Module Size Used by cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 xt_recent 5977 0 xt_tcpudp 2319 0 iptable_nat 4299 0 nf_nat 13388 1 iptable_nat nf_conntrack_ipv4 9833 3 iptable_nat,nf_nat nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip6table_filter 2384 0 ip6_tables 15075 1 ip6table_filter xt_DSCP 1995 0 xt_TCPMSS 2919 0 ipt_LOG 4518 0 ipt_REJECT 1953 0 iptable_mangle 2817 0 iptable_filter 2258 0 xt_multiport 2267 0 xt_state 1303 0 xt_limit 1782 0 xt_conntrack 2407 0 nf_conntrack_ftp 5537 0 nf_conntrack 46535 6 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,xt_conntrack,nf_conntrack_ftp ip_tables 13899 3 iptable_nat,iptable_mangle,iptable_filter x_tables 12845 13 xt_recent,xt_tcpudp,iptable_nat,ip6_tables,xt_DSCP,xt_TCPMSS,ipt_LOG,ipt_REJECT,xt_multiport,xt_state,xt_limit,xt_conntrack,ip_tables loop 11799 0 radeon 573996 0 ttm 39986 1 radeon drm_kms_helper 20065 1 radeon snd_hda_codec_atihdmi 2251 1 drm 142359 3 radeon,ttm,drm_kms_helper snd_hda_intel 20019 0 i2c_algo_bit 4225 1 radeon pcspkr 1699 0 i2c_piix4 8328 0 snd_hda_codec 54244 2 snd_hda_codec_atihdmi,snd_hda_intel i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 snd_hwdep 5380 1 snd_hda_codec snd_pcm 60503 2 snd_hda_intel,snd_hda_codec snd_timer 15582 1 snd_pcm snd 46446 5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 4598 1 snd evdev 7352 3 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm k8temp 3283 0 edac_core 29261 0 edac_mce_amd 6433 0 shpchp 26264 0 pci_hotplug 21203 1 shpchp button 4650 0 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53754 0 powernow_k8 10978 1 aacraid 59779 0 3w_9xxx 28684 0 3w_xxxx 20569 0 raid10 17809 0 raid456 44500 0 async_raid6_recov 5170 1 raid456 async_pq 3479 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2478 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy 1198 2 raid456,async_raid6_recov async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy raid1 18431 3 raid0 5517 0 md_mod 73824 7 raid10,raid456,raid1,raid0 sata_nv 19166 0 sata_sil 7412 0 sata_via 7928 0 sd_mod 29889 8 crc_t10dif 1276 1 sd_mod ata_generic 3047 0 ahci 32374 6 r8169 29229 0 mii 3210 1 r8169 thermal 11674 0 pata_atiixp 3489 0 libata 133632 6 sata_nv,sata_sil,sata_via,ata_generic,ahci,pata_atiixp ohci_hcd 19212 0 ehci_hcd 31151 0 processor 29935 1 powernow_k8 thermal_sys 11942 2 thermal,processor scsi_mod 122149 5 aacraid,3w_9xxx,3w_xxxx,sd_mod,libata usbcore 122034 3 ohci_hcd,ehci_hcd nls_base 6377 1 usbcore # free total used free shared buffers cached Mem: 8166128 1228036 6938092 0 140412 782060 -/+ buffers/cache: 305564 7860564 Swap: 2102456 0 2102456 So, basically my questions are: How can I diagnose this further? Is there any data in the log above that could help me to isolate the troublemaker? Are there any known problems with the above hardware/software I overlooked when googling for it? Is there a way to prevent the kernel from autoloading modules (I probably don't need all these modules and one of them might be the culprit)

  Read the article

• Delay before download starts when serving files using nginx

  - by glumbo

  I am currently using nginx to serve downloads off my website. Users sometimes need to wait about 5 seconds before their download starts after clicking a download link. I'm not sure if I need to start using raid 10 (I'm currently using raid 50) or if this is a problem with my nginx configuration. I am also on a 1gbit line but download sometimes go as low as 10kB/s. My server: Dual Xeon 5620 CPU, 12x2TB drives with 8GB ram. This is my nginx.conf #user nobody; worker_processes 12; worker_rlimit_nofile 10240; worker_rlimit_sigpending 32768; error_log logs/error.log crit; #pid logs/nginx.pid; events { worker_connections 2048; } http { include mime.types; default_type application/octet-stream; access_log off; limit_conn_log_level info; log_format xfs '$arg_id|$arg_usr|$remote_addr|$body_bytes_sent|$status'; #sendfile on; #tcp_nopush on; reset_timedout_connection on; server_tokens off; autoindex off; keepalive_timeout 0; #keepalive_timeout 65; limit_zone one $binary_remote_addr 10m; perl_modules perl; perl_require download.pm;

  Read the article

• ESXi Server with 12 physical cores maxed out with only 8 cores assigned in virtual machines

  - by Sam

  I have an ESXi 5 server running on a 2-processor, 12-core system with hyperthreading enabled. So: 12 physical cores, 24 logical ones. On this server are 4 Windows 7 VMs, each configured for 2 processors, each running VMware Tools. Looking at my stats in vSphere, my "core utilization" is constantly maxed out. Yes, these machines are working hard, but only 8 cores have been allocated. How is this possible? Should I look into reducing the processor count per machine as in this post: VMware ESX server? I checked to ensure that hardware virtualization is enabled in the BIOS of the machine (a DELL R410). I've also started reading up on configuration, but being a newbie there's a lot of material to catch up on. It also seems I should only bother with advanced settings and pools if I'm really pushing the load, and I don't think that I should be pushing it with so few VMs. I suspect that I have some basic, incorrect configuration setting, but it's also possible that I have some giant misconceptions about virtualization. Any pointers? EDIT: Given the responses I've gotten so far, it seems that this is a measurement problem and not a configuration problem, making this less critical. Perhaps the real question is: How does the core utilization of the server reach a higher percentage than all individual cores' core utilization, and given that this possibility makes the metric useless for overall server load, what is the best global metric for measuring CPU load on hyper-threaded systems?

  Read the article

• Poor NFS Performance: OpenFiler

  - by Safin09

  Good Day Everyone, I have an issue with OpenFiler, a Linux-based operating that converts a computer system into a SAN/NAS appliance. Here is the problem. In my environment we have two Netapp Storevault 500 appliances that I normally perform backups to a NFS share. There are two backup cronjobs that use ghettoVCB to backup two groups of VM's. One group is a pool of 3 VMs. This takes 13 mins to complete. A second job that backups a pool of 5 VMs to a 2nd Storevault appliance which takes 2 hours. We then installed Openfiler on a old server that has 2 core Xeon processors. There is a software RAID 5 process in place. When performing the same backups to a NFS Openfiler share, the first backup job, which takes 13 mins, takes around 4 hours. The second backup job, which takes 2 hours, takes almost 10 hours to complete. This is unacceptable!!!! Especially considering the strain placed on the host ESX Server. I assumed that because of the software RAID 5, the overhead on the CPU explained the long backup times. I then installed Openfiler on a 2nd server, an IBM x306 machine which has a P4 Intel processor. This time no software RAID or any RAID at all. A single 750GB hard drive that contained the OS and the rest of the disk uses to backup VMs to a NFS share. I performed the first backup job of the pool of 3 VMs. This time the backup job took 1 and 1/2 hours to complete instead of 13 mins!!!!!!!!!! Is Openfiler simply poor at being an NFS Server!!!!!!!!!!!!! Has anyone else had these issues with Openfiler?

  Read the article

• Maximum RAM on Biostar P4M8PM7 Socket775 mATX board

  - by Alex Balashov

  I have a server with a Biostar P4M8PM7 ("Pro-M7") board based on a VIA chipset. It's a strange board to put in a server because it seems like more of a desktop board to me, but alas! It takes DDR2-667 (PC5300) RAM. What I can't figure out is the maximum amount I can put in it, as I cannot find the manual anywhere online. I've found a few marketing broadsheets from online retailers that say, "up to 2 GB of RAM!" but I am not sure whether to believe them. They also do not seem to be quite for the same board, as they indicate DDR2 400/533 RAM, for example: http://www.geeks.com/details.asp?invtid=P4M8P-M7. The manufacturer's web site says the same thing, but does not elaborate. It's a 64-bit CPU and board; is there a technical reason why the board would not be able to address more than 2 GB? Can someone tell me what sort of that reason that would be? I bought this server from someone really hoping I could put 8 to 16 in it, and wanted to do some research before I gave up. On a related note, it's not indicated anywhere whether it can take ECC RAM; the existing chips are not ECC, but most memory sold in the range I'm looking for (e.g. DIMMs with enough chip density to do 8 GB) seems to be server-class and for that reason ECC. Any ideas? Thank you very much for your consideration in advance!

  Read the article

• process and memory issue on linux server

  - by zapping

  Need some assistance in analyzing apache and php process running on linux server. Its a 8-core intel processor with 4GB ram. When the website on it runs the top displays like this. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 23459 username1 16 0 151m 27m 8388 S 11.3 0.7 0:11.71 php5 23730 username1 16 0 151m 28m 8388 S 11.3 0.7 0:03.87 php5 23458 username1 16 0 151m 28m 8388 S 3.0 0.7 0:19.20 php5 16202 mysql 15 0 459m 38m 4624 S 0.7 1.0 62:33.81 mysqld 24141 nobody 15 0 311m 5832 2304 S 0.3 0.1 0:00.03 httpd Why does the command say php5 when the website is accessed. Both apache and php was preconfigured so not sure whats done there. Tried setting up the same site and db on a different server but on it the process shows httpd always and not php5. The site uses mysql db. The problem is server load seems to go till about 5.x when the website was access by about 16users. When the free -m command was given the output shows total used free shared buffers cached Mem: 3941 3727 213 0 236 2734 -/+ buffers/cache: 756 3184 Swap: 4095 0 4095 Lots of memory seems to be in cache and free memory is less. Even when the website is not accessed that is leaving it very much idle for about 2days the free memory showed just 190. When the site is accessed the free memory seems to be go till 90mb then it increases to about 150mb. It always seems to remain just about 200mb. Is it somehow related to the server load showing 5.x. Will adding some more RAM resolve the load issue?

  Read the article

• Bacula v5.0.2 Windows Installation Issues

  - by JohnyD

  First off, I am very new to Bacula but I'm very intriqued from what I've read. I'm looking to set up Bacula 5.0.2 on a Windows 2008 R2 server. I've run the installer and at the end it asks me to configure DIR name, DIR password, DIR Address. Windows documentation is somewhat hard to come by and I'm not certain what exactly I'm supposed to enter here. Do I need to create a local account that matches this info? Will the installation process create the account for me? Will this be the account that handles the FD daemon/service? I'm also not certain if Address means network location or local direcory. I apologize for my ignorance. Currently I'm trying to use the following information: Name: john pass: john address: thin1 (server name although I have also tried thin1.fqdm.local and 10.0.0.104) This info allows for the installer to complete successfully. However, when I run the BAT it hangs at, "Connecting to Director thin1:9101". The Bacula File Service is currently running under the local system account. What am I doing wrong? What do I have yet to do? Once I get this working properly I assume I will need to install clients on all my Windows boxes? Also, this is a 64-bit cpu but I am installing the 32-bit client. Are there any issues with this? Should I be using the 32-bit client? Thanks very much for the help.

  Read the article

• Munin node not listing any plugins on new Fedora 14 installation

  - by Dave Forgac

  I have just installed munin-node from the base repo on Fedora 14 and then started it. I found that my munin server is not able to collect data from this node so I tried connecting via telnet to test. When connecting via telnet I see that no plugins are listed: [dave@host ~]# telnet localhost 4949 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. # munin node at host.example.com list quit Connection closed by foreign host. [dave@host ~]# I did not modify anything after the installation. The munin-node.conf is allowing connections from 127.0.0.1 and the default set of plugins in /etc/munin/plugins/ are symlinked to the plugins in /usr/share/munin/plugins/. Here is the working output of the telnet test of the 'list' command should look like (this is on a Fedora 13 host): [dave@www ~]$ telnet localhost 4949 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. # munin node at www.example.com list apache_accesses apache_processes apache_volume cpu df df_inode entropy forks fw_packets if_err_eth0 if_err_eth1 if_eth0 if_eth1 interrupts iostat iostat_ios irqstats load memory munin_stats mysql_ mysql_bytes mysql_innodb mysql_queries mysql_slowqueries mysql_threads netstat open_files open_inodes postfix_mailqueue postfix_mailvolume proc_pri processes swap threads uptime users vmstat yum quit Connection closed by foreign host. [dave@www ~]$ Edited to show output of munin-node-configure: [root@host ~]# munin-node-configure Plugin | Used | Extra information ------ | ---- | ----------------- acpi | no | amavis | no | ... http_loadtime | no | if_ | yes | eth1 eth0 if_err_ | yes | eth0 eth1 ifx_concurrent_sessions_ | no | interrupts | yes | ... uptime | yes | users | yes | varnish_ | no | vserver_resources | no | yum | yes | zimbra_ | no | Any suggestions on what to check next?

  Read the article

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• Computer specs for a large database

  - by SpeksETC

  What sort of computer specs (CPU, RAM, disk speed) should I use for running queries on a database of 200+ million records? The queries are for a research project, so there is only one "user" and only one query will be running at a time. I tried it on my own laptop with SQL Server with an i3 processor, 2GB RAM, 5400 RPM disk and a simple query didn't finish even after 8+ hours. I have an option to connect a SSD via eSata and upgrade to 4GB RAM, but not sure if this will be enough... Thanks! Edit: The database is about 25 GB and the indexes are not setup properly. When I tried to add an index, I let it run for about 8 hours and it still hadn't finished so I gave up. Should I have more patience :)? In general, the queries will run once in a while and its ok even if it takes a couple hours to complete.... Also, the queries will produce probably about 10 million records which I need to process using Stata/Matlab and I'm concerned that my current laptop is not strong enough, but unsure of the bottleneck....

  Read the article

• JAVASCRIPT ENABLED

  - by kirchoffs415

  HI, I hope somebody can help, i keep getting the following message when i log on-- Your Javascript is disabled. Limited functionality is available. it will stay for maybe a day sometimes two.I have uninstalled javascript and reinstalled but still the same. Iam using chrome. any help would be gratefull many thanks Dominic p.s. my system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

  Read the article

• 4.00gb (3.25gb usable) in Windows 7 x64

  - by dotnetdev

  Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

  Read the article

• Play audio over network with Windows 7?

  - by Josh

  I have a unique situation where I'd like to stream audio (ALL audio, not just mp3s, etc) from my laptop to another computer over the network. I live in a studio apartment and my laptop is my main computer but I'd like it's audio to play on my htpc with a nice stereo system. Since it's a studio, both computers are in the same room so I don't want 2 sets of speakers. I want my computer to directly play back through the stereo. I used to do this with pulseaudio but my job now requires that I run Windows full time. I'm aware of Shoutcast and other similar streaming solutions but I don't want any transcoding done. It's a waste of CPU and not to mention my laptop fans, and I don't mind the network bandwidth that uncompressed audio requires. Is there a way to run Shoutcast without encoding? Also, I know that Windows Remote Desktop can play audio over the network pretty easily. Is this part of .Net that I could just code a simple app that streams the audio without RD'ing in? I also don't want to run it over a physical wire. :)

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• Gluster bricks are offline and errors in logs

  - by Roman Newaza

  I have substituted all the IP addresses with hostnames and renamed configs (IP to hostname) in /var/lib/glusterd by my shell script. After that I restarted Gluster Daemon and the volume. Then I checked if all the peers are connected: root@GlusterNode1a:~# gluster peer status Number of Peers: 3 Hostname: gluster-1b Uuid: 47f469e2-907a-4518-b6a4-f44878761fd2 State: Peer in Cluster (Connected) Hostname: gluster-2b Uuid: dc3a3ff7-9e30-44ac-9d15-00f9dab4d8b9 State: Peer in Cluster (Connected) Hostname: gluster-2a Uuid: 72405811-15a0-456b-86bb-1589058ff89b State: Peer in Cluster (Connected) I could see mounted volumes size change on all the nodes when I execute df command, so new data is coming. But recently I noticed error messages in app log: copy(/storage/152627/dat): failed to open stream: Structure needs cleaning readfile(/storage/1438227/dat): failed to open stream: Input/output error unlink(/storage/189457/23/dat): No such file or directory Finally, I have found out some bricks are offline: root@GlusterNode1a:~# gluster volume status Status of volume: storage Gluster process Port Online Pid ------------------------------------------------------------------------------ Brick gluster-1a:/storage/1a 24009 Y 1326 Brick gluster-1b:/storage/1b 24009 N N/A Brick gluster-2a:/storage/2a 24009 N N/A Brick gluster-2b:/storage/2b 24009 N N/A Brick gluster-1a:/storage/3a 24011 Y 1332 Brick gluster-1b:/storage/3b 24011 N N/A Brick gluster-2a:/storage/4a 24011 N N/A Brick gluster-2b:/storage/4b 24011 N N/A NFS Server on localhost 38467 Y 24670 Self-heal Daemon on localhost N/A Y 24676 NFS Server on gluster-2b 38467 Y 4339 Self-heal Daemon on gluster-2b N/A Y 4345 NFS Server on gluster-2a 38467 Y 1392 Self-heal Daemon on gluster-2a N/A Y 1402 NFS Server on gluster-1b 38467 Y 2435 Self-heal Daemon on gluster-1b N/A Y 2441 What can I do about that? I need to fix it. Note: CPU and Network usage of all the four nodes are about the same.

  Read the article

• laptop motherboard "shorts" when connected to adapter

  - by Bash

  Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

  Read the article

• Computer randomly freezes when playing games

  - by TutorialPoint

  My computer just randomly freezes when playing certain games. It has happened to me in Battlefield: Bad Company 2, Call of Duty 4, and Blacklight: Retribution. It has not happened to me with other games like Tribes: Ascend yet, which leads me to believe it is a software-side issue related to maybe DirectX or PhysX? Also, temperatures seem stable. I used RivaTuner combined with MSI Afterburner, and at the time of freezing with BF:BC2, it gives: 62C, 67% GPU usage and 78.8FPS. During the session the max I have seen was 65C and 97% GPU usage. On Blacklight: Retribution, I've heard other people complain about the problem too. This is why it is such a mystery to me, is this actually a driver problem, or more a game problem? I've been able to play these games for long until I re-installed Windows 7 (because it was growing too full and slow). Before I had a 32bit Ultimate version, and now 64bit. Specs: O/S: Windows 7 64bit Ultimate CPU: Intel i5-750 @ Default 2.66 GHz GPU: ASUS EAH5770 1GB PSU: CoolerMaster Real Power M520 (520W) MB: Gigabyte P55M-UD2 Catalyst Control Center version (in "About"): 2012.0214.2218.39913

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >