Search Results

Search found 8238 results on 330 pages for 'dynamic disks'.

Page 182/330 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • Resetup kernel for virtualbox and now ubuntu is in initramfs state

    - by UbuntuMan
    My 10.04LTS became Read-Only so I wanted to reboot this virtual machine. Then I couldn't get it back up running. VirtualBox threw Result Code: NS_ERROR_FAILURE (0x80004005) error. I did the kernel re-setup: sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules [ OK ] * Uninstalling old VirtualBox DKMS kernel modules [ OK ] * Trying to register the VirtualBox kernel modules using DKMS [ OK ] * Starting VirtualBox kernel modules [ OK ] I can't even use sudo in this state. What can I do? (initframfs) /dev/sda1 /bin/sh: /dev/sda1: Permission denied (initframfs) /dev/sda2 /bin/sh: /dev/sda3: Permission denied (initframfs) /dev/sda3 /bin/sh: /dev/sda1: not found I have a similar image so I can check the disks setting if needed. Please help me. Thanks. I have an older version of VirtualBox: 4.0.8 something like that. But other vms on the same VirtualBox are working fine. UPDATE I can hold down SHIFT key and see the GURU menu. Only one kernel exists. Ubuntu(...) Ubuntu(recovery) master test master test

    Read the article

  • website not available outside

    - by Keshav Nair
    I am new to ubuntu server and i have installed ubuntu server on a vm and installed LAMP etc but my problem is that my website is not visible outside. i have port triggering and added port 21,22 and 80. i really don't know what am doing, i am totally lost! I have a dynamic ip but i can access the server through 192.168.25.1 no matter how many times i restart the modem and from my public ip. I get redirected to my router settings what should i do??

    Read the article

  • RightNow CX @ OpenWorld: What to Experience

    - by Tony Berk
    We want to welcome our RightNow CX customers to Oracle OpenWorld next week. Get ready for a great week and a whole new experience! For a high level overview of what is going on during the week, please review these previous posts: Is There a Cloud Over OpenWorld? and What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12. Also, don't forget you can add on the Customer Experience Summit @ OpenWorld to make your week even more complete and get involved with the Experience Revolution! Below is a highlight of only some of the RightNow related sessions at OpenWorld. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. No better way to start off than hearing where Oracle RightNow is going! Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from David Vap and his team of Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Interested in the Cloud and want to know why some leading CIOs are moving to the cloud? You can hear first hand from CIOs from Emerson, Intuit and Overstock.com: CIOs and Governance in the Cloud (CON9767) - Oct 3, 11:45 AM.   And of course there are a number of sessions that drill down into more specific areas. Here are just a few: Deliver Outstanding Customer Experiences: Oracle RightNow Dynamic Agent Desktop Cloud Service (CON9771) - Oct 1, 4:45 PM. This session covers how companies have delivered exceptional customer experiences and how the Oracle RightNow Dynamic Agent Desktop Cloud Service roadmap will evolve in the future. The Oracle RightNow Contact Center Experience suite includes incident management, knowledge, guided processes, and other service capabilities to unify the customer experience across channels. Come learn about the powerful tools that enable even your junior agents to consistently provide outstanding service across all customer interaction channels. Self-Service in the Age of Data Intimacy (CON11516) - Oct 1, 3:15. Even though businesses are generating more and more data around their relationships and interactions with customers, very little of the information a business generates ends up available to the contact center and even less is made available to the online service experience. The generic one-size-fits-all approach that typifies most online service experiences ultimately fails to address all user needs, and that failure ultimately leads to the continued use of high-cost agent-assisted channels for low-value interactions. This session introduces Oracle RightNow Web Experience’s Virtual Assistant and discusses how you can deliver rich, engaging, highly personalized experiences with the quality of agent-assisted service at a much lower cost. Improve Chat Experiences: Best Practices for Chat Pilots and Deployments (CON11517) - Oct 1, 4:45 PM. Today’s organizations are challenged to grow revenue and retain customers with fewer resources, and many have turned to chat as an approach to improving the customer experience, increasing sales conversions, and reducing costs at the same time. From setting goals and metrics and training staff to customizing and tuning the solution, this session provides best practices and lessons learned from a broad set of implementations to help you get the most out of your chat solution. Differentiated Experience with Web Service (CON9770) - Oct 2, 1:15 PM. A reputation for excellent customer service can differentiate your brand and drive revenue. In this session, learn how to develop that reputation by transforming your online self-service into a highly interactive, branded customer experience. See live examples of how Oracle RightNow Web Experience has helped customers deliver on their Web service strategies. Unifying the Agent’s Engagement Console (CON11518) - Oct 2, 1:15 PM. Does your customer experience suffer because your agents are toggling between multiple tools? Do your agent productivity and morale suffer as well? Come to this session to learn how Oracle RightNow CX Cloud Service seamlessly unifies these disparate systems into a single engagement console. Regardless of channel, powerful adaptive tools consistently guide agents across contextually aware personalized workflows. Great agent experiences drive great customer experiences. Oracle RightNow CX Cloud Service and the Oracle Customer Experience Portfolio (CON9775) - Oct 3, 10:15 AM. This session covers how Oracle’s integrated suite of customer experience (CX) products fits with the Oracle CX portfolio of products (Oracle Fusion Customer Relationship Management; the Oracle ATG, Oracle Endeca, and Oracle Knowledge product families; and Oracle Business Intelligence) to increase revenues, strengthen customer relationships, and reduce costs across the entire end-to-end customer lifecycle for companies that sell to consumers and those that sell to businesses. Greater Insights from Customer Engagements (CON9773) Oct 4, 12:45 PM. In this session, hear how to leverage service interaction insights, customer feedback, and segmented service engagements to improve the customer experience. Discover how customers, such as J&P Cycles, learn and take action based on business insights gained through their customer engagements. Again, these are just some of the sessions, so check out the Content Catalog for details on Knowledge Management, Customization, Integration and more in the Oracle Develop stream for Customer Experience. Be sure to visit the Oracle DEMOgrounds in the Moscone West Exhibit Hall. If this is your first OpenWorld, welcome! If you are returning, hi again and enjoy!

    Read the article

  • Partner Webcast – Oracle Exadata X3 Database In-Memory Machine - Next-Generation Technologies Update - 20 Dec 2012

    - by Thanos
    Oracle’s next-generation database machine, Oracle Exadata X3, combines massive memory and low-cost disks to deliver even faster performance and greater storage capabilities at the lowest cost, making it the ideal database platform for the varied and unpredictable workloads of cloud computing. Oracle Exadata is available in multiple configurations including a low-cost eighth-rack configuration, so you can start small and grow at your own pace. We have also introduced new migration services designed to streamline implementation thereby saving you time and money. If your IT department is expected to deliver business value—or even drive business growth—then you’ll want to join us for a live Webcast discussing how the new Oracle Exadata X3 can help you transform data management.  Agenda: Oracle Exadata Evolution Oracle Exadata X3 Database In-Memory Machine Hardware Update Software Update Exadata Unique Next Generation Technologies Getting on board Oracle Exadata Q&A Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Thursday, December 20th, 10am CET (9am GMT) Duration: 1 hour Register Now! For any questions please contact us at [email protected] Visit our ISV Migration Center blog Or Follow us @oracleimc to learn more on Oracle Technologies, upcoming partner webcasts and events. Existing content available YouTube - SlideShare - Oracle Mix.

    Read the article

  • Internet Good but update manager not good

    - by Raja
    I am using Ubuntu 12.04 . I am doing Internet with a USB Modem of 236kbps . My issue is , If i am accessing webpage through browser its good but if i am doing sudo apt-get update through terminal , its not responding & its just hanging there .I am unable to get whats my issue . help me to solve this . one more thing , i am unable to change my dns also . raja@badfox:~$ cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 220.226.100.40 nameserver 220.226.6.104 nameserver 127.0.0.1 I wanna replace them to dns ip's linked here http://www.cyberciti.biz/faq/free-dns-server/ see the picture to have some idea about my issue .

    Read the article

  • What is the difference between Java 6 and PHP 5.4? [closed]

    - by Mashael
    First of all, let me explain the matter. I'm in a class where we learn Java 6 OOP fundamentals. However, my goal is to learn PHP (the last version) next. So, my question: Is there a big difference between PHP and Java 6 in OOP concepts? Meaning that after I finish the OOP class in Java will I find a lot of things that need to be learned in PHP regarding OOP? Update: *My goal of learning PHP next is to build dynamic sites* (I'm not sure of other options) and to follow OOP.

    Read the article

  • How can I host a website on a dynamically-assigned IP address?

    - by nick
    I recently upgraded my internet to the point that it is much faster and more reliable than my current webhost. I would like to move my current domain to be hosted at home, but my IP address is dynamic. As far as I know, I only get a new IP when I restart my modem and or router (which is almost never) or when cable one (my ISP) pushes out a firmware update (rarely). There are a few ways I can see doing this: Convince my ISP to give me a static IP Assign my router my current IP to force a static IP (which might work?) Set my DNS record to my current IP address and update it on the rare occasions that it changes. Obviously I'm hoping that the first one works, but I don't want to pay a lot of extra money (if that's what it takes) to get a static IP address. Which of these options will work most reliably?

    Read the article

  • Why is the root partition on my disk full?

    - by Agmenor
    I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

    Read the article

  • How does a search functionality fit in DDD with CQRS?

    - by Songo
    In Vaughn Vernon's book Implementing domain driven design and the accompanying sample application I found that he implemented a CQRS approach to the iddd_collaboration bounded context. He presents the following classes in the application service layer: CalendarApplicationService.java CalendarEntryApplicationService.java CalendarEntryQueryService.java CalendarQueryService.java I'm interested to know if an application will have a search page that feature numerous drop downs and check boxes with a smart text box to match different search patterns; How will you structure all that search logic? In a command service or a query service? Taking a look at the CalendarQueryService.java I can see that it has 2 methods for a huge query, but no logic at all to mix and match any search filters for example. I've heard that the application layer shouldn't have any business logic, so where will I construct my dynamic query? or maybe just clutter everything in the Query service?

    Read the article

  • Xcode Video From UITableView [migrated]

    - by Luis Felipe Beltran
    I have created different UITableViews. Each of these are dynamic tables that contain NSarrays of words. Right now When a cell is tabbed it takes the user to another View (simple view controller) that has a label and a UIImageview that displays a picture. My problem is that I also want to show video. Some of these words need to show pictures, and others need to show video. I have shown video before but I have done it using a button. I need help! I would appreciate if you guys could help here. Again, Im trying to show a video from a UITableView after the user tabs a cell. (I have many videos not just one, so dynamically would be better if possible)

    Read the article

  • Installing old Loki games on 12.04 64-bit results in no audio

    - by FlabbergastedPickle
    All, Here's an interesting problem. I followed instructions provided online for installing Loki Games' Heroes of Might and Magic 3 (see http://www.swanson.ukfsn.org/loki/ and http://wtanaka.com/node/7641) and got it installed and patched to the latest version. However, every time I start it regardless whether the pulseaudio is running, I get the following error: LD_LIBRARY_PATH=/usr/local/lib/Loki_Compat/ /usr/local/lib/Loki_Compat/ld-linux.so.2 /usr/local/games/Heroes3/heroes3.dynamic ALSA lib conf.c:3314:(snd_config_hooks_call) Cannot open shared library libasound_module_conf_pulse.so ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM default Couldn't open audio: My first soundcard is HDMI output and my second one is the actual soundcard (HP DM1 running 12.04 64-bit with latest updates). I did set up /etc/asound.conf as follows: asound.conf pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } So, the default soundcard should work ok. Between Shadowgrounds that also stopped working and this it appears a there may be some unfinished business/regressions in 32-bit support on 64-bit systems in 12.04. Any thoughts?

    Read the article

  • Have to run sudo dhclient eth0 automatically every boot

    - by Fyksen
    I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

    Read the article

  • How to point GoDaddy to EntryDNS domain

    - by geminiCoder
    I have a server connected via dynamic IP. I have set up EntryDNS to manage the change of my IP. If I put in my EntryDNS URL it points me to my server's current IP. I purchased a domain from GoDaddy, but I have been unable to get it to point to my EntryDNS. What I want is to be able to ssh to my server, but ideally I'd like to do this by using my domain name. I must confess I'm a bit overwhelmed by the GoDaddy interface. So the bottom line is, how do I point my GoDaddy domain to my DNS domain so that when I look up the domain I get the current IP of the server?

    Read the article

  • Can not print after upgrading from 12.x to 14.04

    - by user318889
    After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

    Read the article

  • creating the nodes for path finding during run time - more like path making and more

    - by bigbadbabybear
    i'm making my 1st game. i'm using javascript as i currently want to learn to make games without needing to learn another language but this is more of a general game dev question its a 2d turn-based tile/grid game. you can check it here http://www.patinterotest.tk/ it creates a movable area when you hover a player and it implements the A* algo for moving the player. The Problem: i want to make the 'dynamic movable area creation' already implement a limited number of steps for a player. The Questions: what is a good way to do this? is there another algorithm to use for this? the A* algorithm needs a start and destination, with what i want to do i don't have a destination or should i just limit the iteration of the A* algo to the steps variable? hopefully you understand the problem & questions easily

    Read the article

  • Avoid GPL violation by moving library out of process

    - by Andrey
    Assume there is a library that is licensed under GPL. I want to use it is closed source project. I do following: Create small wrapper application around that GPL library that listens to socket, parse messages and call GPL library. Then returns results back. Release it's sources (to comply with GPL) Create client for this wrapper in my main application and don't release sources. I know that this adds huge overhead compared to static/dynamic linking, but I am interested in theoretical way.

    Read the article

  • structure problem in Relational DBMS creation

    - by Kane
    For learning and understanding purpose, I currently want to try to make a small relational DBMS with simple features like (for now) only sequential reading/writing and CREATE TABLE, INSERT, SELECT, UPDATE and DELETE management. I am currently on the "think" part of the project and I am stuck on the way to store the read data in memory. First I was thinking of putting them properly on a structure, but the problem is that tables are all different, know the type of each column is not an issue, but I am not sure C provide a way to make fully dynamic structure. My second and current idea is to make a simple char array of the required length and just get the data by order with cast. But I am not sure if it is the good way to do that part, so I wanted to ask for your opinion and advices about that. Thanks in advance for your help. nb: I hope my question is enough clear and understandable, I still lack of pratice in english

    Read the article

  • Integration error in high velocity

    - by Elektito
    I've implemented a simple simulation of two planets (simple 2D disks really) in which the only force is gravity and there is also collision detection/response (collisions are completely elastic). I can launch one planet into orbit of the other just fine. The collision detection code though does not work so well. I noticed that when one planet hits the other in a free fall it speeds backward and goes much higher than its original position. Some poking around convinced me that the simplistic Euler integration is causing the error. Consider this case. One object has a mass of 1kg and the other has a mass equal to earth. Say the object is 10 meters above ground. Assume that our dt (delta t) is 1 second. The object goes to the height of 9 meters at the end of the first iteration, 7 at the end of the second, 4 at the end of the third and 0 at the end of the fourth iteration. At this points it hits the ground and bounces back with the speed of 10 meters per second. The problem is with dt=1, on the first iteration it bounces back to a height of 10. It takes several more steps to make the object change its course. So my question is, what integration method can I use which fixes this problem. Should I split dt to smaller pieces when velocity is high? Or should I use another method altogether? What method do you suggest? EDIT: You can see the source code here at github:https://github.com/elektito/diskworld/

    Read the article

  • Some websites are not opening in any web browser (firefox/chrome). What should I do? [closed]

    - by Jamal
    Some websites are not opening in my system. I am using Ubuntu 12.10. Earlier, when I was using Ubuntu 10.10,11.10 there was no such issue. The problem was started in ubuntu 12.04, but it remained the same even after formatting and installing ubuntu 12.10. I have tried Firefox as well as Chromium and I am sure the issue is not with the browser. same websites are opening perfectly with Windows. Google, Twitter and Ubuntu related websites are running perfect. Other websites like www.downrightnow.com, easy-mantra.com, facebook.com, sourceforge.net are not opening. Installed dual boot with win xp. Ubuntu 12.10 is 64 bit. Processor Intel core i3, RAM 4GB. $ cat /etc/resolv.conf <-- Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) -- DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN -- output --> nameserver 127.0.1.1

    Read the article

  • Can SpriteBatch be used to fill a polygon with a texture?

    - by can poyrazoglu
    I basically need to fill a texture into a polygon using the SpriteBatch. I've done some research but couldn't find anything useful except polygon triangulation method, which works well only with convex polygons (without diving into super math which is definitely not something I'm pretty good at). Are there any solutions for filling in a polygon in a basic way? I of course need something dynamic (I'll have a map editor that you can define polygons, and the game will render them (and collision detection will also use them but that's off topic), basically I can't accept solutions like "pre-calculated" bitmaps or anything like that. I need to draw a polygon with the segments provided, to the screen, using the SpriteBatch.

    Read the article

  • What are some client-side sitemap generators?

    - by BHare
    Most of the sitemap generators I've found all scan my internal files and base it on that. However using apache and htaccess I have many aliases for things for example: /brand/model/photos/ is empty directory wise, but on the web it relocates it to a zenphoto gallery using htaccess. http://www.xml-sitemaps.com/ does What I need, but I'd like to have more control over it and I need it to be dynamic and run weekly or daily. Allow for specific change frequencies based on the file/directory. I also want to be able to make a "pretty" sitemap html file. Counting the photo gallery I have around 300 links, without the photo gallery more like 100. I have MySQL, PHP 5.3 installed.

    Read the article

  • flash twitter and facebook widgets

    - by NorthPole
    I'm stuck with a crappy digital signage platform that only renders .html and .swf files (and rss feeds) No customization of rss, only way to show something dynamic in a pretty way is to use flash. The question: is there any way to embed javascript in swf files or somehow have facebook and twitter flash plugins? I looked for ready-made swf widgets for the job but didn't find any, if there is any flash widget that serves a facebook and/or twitter feed please give me a link. (sorry if the question is out of context but these things usually run a stripped-down browser to display everything so its pretty much a web page run from a file and not a web server)

    Read the article

  • unknown filsystem with grub rescue caption cannot boot

    - by Dom
    I just recently partitioned my hard drive and I got this error when booting Ubuntu on that drive. unknown filesystem. With the grub rescue terminal. I did some research and tried to download super grub disk but I cant seem to fix it with that. I have two hard disks. One with Windows Vista on it and the other with Ubuntu which is the one I partitioned. There was 100GB reserved for all the Ubuntu partitions that I needed and the rest was split into two partitions, one for backup folders for my Windows machine and the other for music production which is the one that I created. The space used to created that was shrunk from my backup partition so I didn't mess with any of the Ubuntu partitions. As of now there are a total of 5 partitions. I also downloaded Rescatux which is another Super Grub Disk for Grub 2 not knowing which grub I had. It still didn't work. In Super Grub Disk I tried to swap the hard disk because that was what was said to do in order to fix the grub, that didn't work it said it was unsuccessful. I even tried to unplug the Windows hard disk and run Super Grub Disk and that wasn't successful either. Is there another way I can fix this? Please any help would be greatly appreciated. I would like to have a nice step by step response.

    Read the article

  • Canon MG6100 series USB Printer not mounting

    - by user35201
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

    Read the article

  • Don&rsquo;t Miss &ldquo;Transform Field Service Delivery with Oracle Real-Time Scheduler&rdquo;

    - by ruth.donohue
    Field resources are an expensive element in the service equation. Maximizing the scheduling and routing of these resources is critical in reducing costs, increasing profitability, and improving the customer experience. Oracle Real-Time Scheduler creates cost-optimized plans and schedules for service technicians that increase operational efficiencies and improve margins. It enhances Oracle’s Siebel Field Service with real-time scheduling and dispatch capabilities that ensure service requests are allocated efficiently and service levels are honored. Join our live Webcast to learn how your organization can leverage Oracle Real-Time Scheduler to: Increase operational efficiency with real-time scheduling that enables field service technicians to handle more calls per day and reduce travel mileage Resolve issues faster with dynamic work flows that ensure you have the right technician with the right skill set for the right job Improve the customer experience with real-time planning that optimizes field technician routing, reduces customer wait times, and minimizes missed SLAs Date: Thursday, March 10, 2011 Time: 8:30 am PT / 11:30 am ET / 4:30 pm UK / 5:30 pm CET Click here to register now.   Technorati Tags: Siebel Field Service,Oracle Real-Time Scheduler

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >