Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 182/356 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • Rough estimate for speed advantage of SAN-via-fibre to san-via-iSCSI when using VMware vSphere

    - by Dirk Paessler
    We are in the process of setting up two virtualization servers (DELL R710, Dual Quadcore Xeon CPUs at 2.3 Ghz, 48 GB RAM) for VMware VSphere with storage on a SAN (DELL Powervault MD3000i, 10x 500 GB SAS drives, RAID 5) which will be attached via iSCSI on a Gbit Ethernet Switch (DELL Powerconnect 5424, they call it "iSCSI-optimized"). Can anyone give an estimate how much faster a fiber channel based solution would be (or better "feel")? I don't mean the nominal speed advantage, I mean how much faster will virtual machines effectively work? Are we talking twice the speed, five times, 10 times faster? Does it justify the price? PS: We are not talking about heavily used database servers or exchange servers. Most of the virtualized servers run below 3-5% average CPU load.

    Read the article

  • Verify server performance

    - by George Kesler
    I'm looking for a quick and SIMPLE way to verify that new servers are performing as expected. The most important metric is disk performance, second is network performance. I’m trying to prevent problems caused by misconfiguration of RAID arrays, NIC teaming etc. The solution should work with both physical and virtual servers. I don’t need sophisticated analysis with different workloads, just one set of benchmarks which I would run against a reference server and later compare to new ones. One problem is that most benchmarks are not giving accurate results when running on a VM.

    Read the article

  • Recording phone calls on my Droid

    - by justSteve
    I've been bumping my head against Droid's inability to record phone calls hoping against hope that things would improve after the update. Is there any indication that phone recording will work better under 2.1? Any place that explains why Droids _can't record the phone audio stream? Hardware or OS? thx

    Read the article

  • Trying to determine the correct number of XFS allocation groups for postgresql server on Linux

    - by HBlend
    I am running a postgres 8.4.5 server on the linux 2.6.33.7 kernel on an 8 disk raid array with an LSI controller. Most of the tables are around 1GB or less. I know that XFS uses allocation groups (AG) to achieve I/O parallelism. My first question is, does this mean that if two tables are in the same AG, all I/O requests are queued to both of them if either is being read from/written to? If so, I assume I would want to spread my tables across as my allocation groups as possible, correct? Wouldn't this ensure that multiple users querying different tables would get the best performance?

    Read the article

  • Why Buy Hardrives with storage server from a vendor?

    - by Mark
    Hi all, Im just browsing around at storage server's like the Dell MD100/ MD3000 and the Sun J4200 and although the storage server seems reasonable (approx $3000-$4000 AUD) the hard-drives that you buy to go along with them seems exorbitantly expensive. And I'm not sure why. Surely at most they are using good quality RAID level 7200rpm SATA hdd, but even then they are still charging almost 4 times the price. What is the advantage to buying these from them. I can see if one fails then the vendor replacing it is convenient. But at that price you could buy double the amount of hdd and just claim on warranty directly with the manufacturer. It would be much cheaper and you wouldn't be relying on someone else to fix your problems. Is this the case of "you don't get fired if you buy IBM?" mentality or is there some reason I'm not grasping here? Cheers Mark

    Read the article

  • Trouble with wireless driver on a Dell Latitude D830

    - by Kevin
    After uninstalling Dell's wireless utility I get a new hardware found dialog that can not find any driver for my wifi card on it's own. I'm running Windows XP Professional Service Pack 3, and I would like to use the default wifi handler since dell's utility does not work with my company's wireless switch. I did try downloading the recommend driver from the dell support site Network Adapter 2 Model Intel(R) PRO/Wireless 3945ABG Network Connection Description [12] Intel(R) PRO/Wireless 3945ABG Network Connection Status Connected

    Read the article

  • Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

    - by josecortesp
    Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

    Read the article

  • Windows server's HDD Spin down daily/nightly - Does it makes sense?

    - by Riccardo
    A Windows Server 2003 R2 has the following hard disk configuration: - 3 internal hard disks attached to a 3Ware unit, configured in Raid 1 + spare unit - 3 external USB backup disks: 2 Verbatim 1TB (Samsung HD103SI) + 1 Western Digital 1TB (WD10EADS) The server runs 365 days per year, h24, however: - at daytime the server/user usage is limited to the internal hard disks - at nighttime there's no user usage, apart from scheduled maintenance tasks, basically the Server will be idle from 7PM to 8AM. apart from nighly backups (few hours). I was wondering if: (a) it makes any sense let Windows manage power savings, allowing disks to spin down accordingly, ** OR** let the disks stay awlays-on, to avoid permature wearing, due to continuous spin up/down (b) leave internal disks always on, and force external disks to power down while idle (this requires third party tools, such as Verbatim's Green button utility) Your thoughts?

    Read the article

  • Move Virtual PC VM to another machine

    - by user1501700
    I need to move a virtual machine that was created with Windows Virtual PC to another machine. I just copied the files in the Virtual Machines folder to another PC, but when I tried to run it, I got this message: 'Windows XP mode' could not be restored because of either host processor type mismatch or lack of hardware-assisted virtualization support in the system Is it possible copy a virtual machine? What is correct way of achieving this?

    Read the article

  • Alternative to Windows Home Server (WHS) backups

    - by Adam Tegen
    Since Microsoft announced the end of life for WHS, are there any alternatives? Specifically, I am interested in recovering from a catastrophic disk failure with WHS. For example, this is my ideal scenario when a desktop hard-drive fails (has a bad virus, etc): Install a disk of the same size or greater Boot the desktop with the Recovery Disc Point the recovery application at the WHS Pick the machine, the drive(s) and the date of the backup Have a couple beers Reboot to a working machine as if nothing happened. I would need to slap multiple disks in the machine without raid. It sounds like LVM will work here. It would be nice, but not required to have de-duplication of files when multiple machines are backed up. (Single Instance Storage)

    Read the article

  • Set-and-forget Windows backup software with NAS-support?

    - by Evert
    Hi all, I am looking for set-and-forget backup software for Windows (Vista & 7, and if possible XP/2003). The idea is that it runs in the background on the clients, and does its thing towards a network-share. In case the HDD of one of these clients spontaneously combusts, all I want to have to do is: replace the drive, insert a USB-stick, boot from it, and restore the machine. It should support drives which use [ICH]-RAID. What are my options here? It looks like WHS meets all the requirements, but I am curious about my other options here.

    Read the article

  • Migrate OS Install to VMWare Virtual Machine

    - by rockinthesixstring
    I have Windows Server 2003 installed on my server. I'd really like to be running it via VMWare EXSi as a virtual machine, but I don't what to have to reconfigure the whole deal. Is there a relatively painless way to move it to a virtual machine? It will be staying on the same box with the exact same hardware... nothing changes. Thoughts?

    Read the article

  • Diagnosing high CPU waiting

    - by Will
    I have a monitoring server that is running icinga/collectd/graphite with about 50 hosts. I have noticed high load/slugging performance on the box. If you take a look at top, you'll see: Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 7.6%id, 23.4%wa, 0.0%hi, 0.2%si, 0.0%st Notice the HUGE %wa value, which as far as I know means a network or disk bottleneck. ifconfig shows no dropping packets and there's not a ton of bandwidth going on, so that leaves disk issues, right? There's not a lot of disk writing going on either...iotop is reporting we're only writing a little over 1 MB per second and the RAID tool reports everything is A-OK and write caching is enabled. How do I go about trying to figure out how to fix this? UPDATE: iostat -x output is: avg-cpu: %user %nice %system %iowait %steal %idle 0.62 0.10 0.31 9.65 0.00 89.31 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.21 33.34 83.55 16.54 1599.94 399.07 19.97 43.21 416.98 3.71 37.13

    Read the article

  • small IIS web farm-create an Active Directory domain or no?

    - by brian b
    We have a smallish web farm of < 5 Windows 2008 servers. Some do data, most do IIS hosting. Is it a good/bad idea to set up a domain controller and put all in the same "production" domain? We want to avoid a world where we have to sync multiple admin passwords between the boxes (or share admin credentials among the team). Presumably, the DC would be just another VM, so hardware cost doesn't enter into the discussion.

    Read the article

  • How to know which operating system is suitable for my PC between 32/64-bit?

    - by avirk
    I'm using 32-bit operating system since I've my laptop. I've never used the 64-bit operating system so I'm much curious about this that if I upgrade to 64-bit still my pc will give me the same performance. However I've checked about my hardware from this question. I don't know about those result that what they are saying? So I'm here for little help to know that is there any performance issue after upgrading or not?

    Read the article

  • Is Steam for Mac effectively running as superuser?

    - by godDLL
    When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

    Read the article

  • Does SpinRite do what it claims to do?

    - by romandas
    I don't have any real (i.e. professional) experience with Steve Gibson's SpinRite so I'd like to put this to the SF community. Does SpinRite actually do what it claims? Is it a good product to use? With a proper backup solution and RAID fault tolerance, I've never found need for it, but I'm curious. There seems to be some conflicting messages regarding it, and no hard data to be found either way. On one hand, I've heard many home users claim it helped them, but I've heard home users say a lot of things -- most of the time they don't have the knowledge or experience to accurately describe what really happened. On the other hand, Steve's own description and documentation don't give me a warm fuzzy about it either. So what is the truth of the matter? Would you use it?

    Read the article

  • Windows Disk I/O Analysis

    - by Jonathon
    It appears that we are having a problem with the disk i/o speed on our Windows 2003 Enterprise Edition server (64-bit). As we were initializing a database that created two 1G tablespaces on 3 different machines, it became obvious that the two smaller machines (each 32-bit Windows 2003 Standard Edition with less RAM) killed the larger machine when creating the files. The larger machine took 10x as long to create the tablespaces than did the other machines. Now, I am left wondering how that could be. What programs or scripts would you guys recommend for tracking down the I/O problem? I think the issue may be with the controller card (all boxes are hardware RAID 10, but have different controller cards), but I would like to check the actual disk I/O speed as well, so I have some hard numbers to work with. Any help would be appreciated.

    Read the article

  • Can Perforce backup files?

    - by Macca
    From reading the Perforce docs it sounds like only changelists and version history can be backed up. Is it possible to get Perforce to create a backup of files too, so that in the event of loss, through hardware failure for example, a complete set of files could be recovered?

    Read the article

  • System for public internet access

    - by Pydev UA
    I'm looking for solution for a public wifi spot.. I want that all people who connect to our wifi network should be redirected to special website(after they open any internet page) where they should reed and agree with our terms of services(by clicking a button). After that they can open any internet page. I have a router and a linux box with site(with agreement page ready), so I'm looking for some software/or hardware solution for this, preferable open-source.

    Read the article

  • Install Win7 on Dell XPS1730: CD Driver missing

    - by Mies75
    Vista crashed on my DELL XPS 1730 laptop. Again. I deleted the RAID array, created a new one and started to install Window 7 from DVD. During the initial phase of installation the setup pop ups this: Load Driver: A required CD/DVD device driver is missing... I can then insert other media to load the drivers, but it can't find any. I checked the DELL site for drivers but I can only find firmware for the drive. Which driver do I need, and where can I download it?

    Read the article

  • How do I combine static and dynamic DHCP leases on a Cisco router?

    - by Brad
    Basically, what I need is super similar to the unanswered cisco forum question below: https://supportforums.cisco.com/message/3139749#3139749 I have a Cisco 850 Series router. I have configured a DHCP pool for the 10.0.0.0/24 network. I have excluded 10.0.0.1 - 10.0.0.99 from the DHCP pool. I want to add a static DHCP pool for stuff and I want DHCP to statically assign them the addresses of my choice below 100. Actually, I don't care what addresses I statically assign. They can be anything in the pool for all I care, I just want it to work. Why are you doing this? Just statically assign the IPs on the devices! I don't want to do this because I have some laptop users. They could obviously only use that static IP here. This isn't a problem if they could be bothered to change any location setting or something. They can't. So it HAS to be DHCP. It also has to be static IPs because I need to forward ports to them. I know, I know, this is weird but it's an apartment LAN/WLAN so this isn't exactly a typical use case. Relevant sections of config below: ip dhcp excluded-address 10.0.0.1 10.0.0.99 ! ip dhcp pool Internal-net import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.1 domain-name 1770.local lease 7 ! ip dhcp pool static-pool import all origin file flash://staticmap default-router 10.0.0.1 domain-name 1770.local Contents of staticmap: *time* Aug 5 2010 09:00 AM *version* 2 !IP address Type Hardware address Lease expiration 10.0.0.100/24 1 001f.5b3e.d50a Infinite *end* You can see here I was trying addresses outside the excluded-address range to see if that would make any difference. My testing machine's MAC: mainframe:~ brad$ ifconfig en1 en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:3e:d5:0a What shows up in the DHCP binding table: basestar#show ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.0.0.112 0100.1f5b.3ed5.0a Aug 12 2010 10:06 AM Automatic What's up with the funny looking MAC in the DHCP binding table?? Is what I'm trying to accomplish basically impossible? Am I going about this the wrong way? All I want to to be able to port forward some ports to specific devices. The way I would do this with a consumer router is to do what I'm trying to do here; assign static DHCP to those devices then configure PAT for ports on those addresses.

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >