Search Results

Search found 30658 results on 1227 pages for 'off screen'.

Page 182/1227 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Chromebook C720 - issue suspending and booting

  - by user72727

  I recently bought an Acer C720 chromebook (Celeron, 2GB RAM, 16GB SSD) with the intention of loading Linux and using it as a cheap development laptop while on my holiday. The installation sort of went ok but initially the trackpad didn't work so I ran a script that mostly fixed that. My current issues are: Booting: it still goes to the chrome "unknown os" white screen - I have to press ctrl L - then escape then 1 then wait for 30 secs while it seems to be searching for something. Then Ubunto loads up fine. Any idea how to fix this? Suspend: if I close the lid of the laptop then it doesn't seem to suspend properly. At least when I open the lid the screen appears to be on but the screen is blank with a cursor. Nothing responds on the keyboard and I have to hold the power down to restart it. The suspend from the top menu has the same issue. Moving windows: I don't have a mouse click button so how do I move windows around the screen? Launcher bar: I've set mine to auto hide (which it does) but what exactly do you have to do to get it back? I just repeatedly jab the mouse at the side of the screen and eventually it pops up. I don't mind starting all over again but obviously a quick fix is preferred ;) Mike Ubunto 14.04.1 LTS Kernel 3.13.0-32-generic PS Sorry for so many questions.

  Read the article

• Is there going to be Twinview ( or alternative) implemented for nouveau ?

  - by lisak

  as I've had heavy issues with nvidia driver regarding performance of basic X window operations (window moving, resizing, scrolling). I switched to nouveau driver. But I lost the possibility of having dual screen that I had previously thanks to nvidia twinview feature... Anyway I rather have fluent X than dual screen, but having dual screen would be nice, so I'm wondering if there is already an nouveau alternative to nvidia's twinview or if it is going to be implemented.

  Read the article

• Q&amp;A: A Mobile World

  The more open source, the better off we'll be Open source - Programming - Languages - Python - Modules

  Read the article

• Explorer.exe does not starts itself at the startup

  - by Maven

  The problem I am facing is whenever I start my PC after use login window where it should show the start screen my PC just doesn’t show anything except for a mouse cursor. I can press CTRL ALT DELETE and go into task manager go into File Run New Task and then run explorer.exe sometimes this works and start screen becmoes accesible but sometimes I have to repeat it multiple times to make it work or sometimes I just have to restart my PC. More over while on the black screen and being able to access task manager If I right click processes there and open containing folder that also work I can access all my program/files from there but all that is missing is my desktop and start screen Can anybody help me with this? Plus can anybody tell like for explorer there is explorer.exe is there a .exe file which would start the start screen ?

  Read the article

• Brightness options in Ubuntu 12.04 desktop missing

  - by Harsh Thakar

  I am unable to change the brightness of my desktop screen using this path. System settings{top right corner of the screen)Under Personal Brightness & lock.No option to change brightness is available here.In Ubuntu 11.04 Shift key + +/- key was used to change brightness,the same doesn't work in 12.04. Also under System settings{top right corner of the screen)Under Hardware Displays,my monitor is recognized as a Laptop despite me using a desktop!

  Read the article

• Projecting onto different size screens by cropping

  - by Jason

  Hi, I am building a phone application which will display a shape on screen. The shape should look the same on different screen sizes. I. Decided the best way to do this is to show more of the background on larger screen keeping the shapes proportion the same on all screens. My problem is I am not sure how to achieve this, I can query the screen size at runtime and calculate how different it is from the six is designed for but I am not sure what to do with this value. What kind of projection should I use for my orthographic matrix an hour will I display more on larger screens and not loose information on smaller screens? Thanks, Jason.

  Read the article

• Restart and/or graphics problem in Ubuntu 12.04

  - by kara

  I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

  Read the article

• How do I apply 2 rotations about different points to a single primitive using OpenGL

  - by Fenoec

  I'm working on a 2D top-down shooter game that has a rotation feature like Realm Of The Mad God such that if you press e the camera rotates around the character in a clockwise direction and q rotates the camera around the character in a counterclockwise direction. I have this working with my floors and walls by translating to the character, doing the screen rotation, and drawing everything with the character as the origin. The problem arises when I shoot projectiles which need to both rotate around the character and rotate around themselves (shooting uses the mouse cursor so I can shoot at any angle). For example, if the screen is not rotated and I'm shooting rectangular projectiles, I want them to face in the direction I'm shooting (rotation around themselves). However if I only do this rotation, when I then rotate the screen the projectiles will always shoot at the same position because my cursor position does not change. Therefore I need to also either rotate the projectiles around the character or rotate the mouse cursor position to get the correct position (which would then totally screw up all of the collision detection). Likewise if I only do the screen rotation on projectiles, the rectangles will always be facing the same way and they would only look correct if I were shooting straight up or straight down. So my question is, how can I perform 2 rotations on a primitive around 2 different points? The only way I can think of is to translate to the character and do the screen rotation, then somehow calculate the translation required to move back to the middle of the projectile (seeing as how my axes are now rotated) and do its rotation. Or am I thinking about this in the wrong way and there is a different solution to accomplishing this effect?

  Read the article

• My ubuntu with unity not loading after last reboot

  - by Abonec

  I have asus u36sd and after last reboot I can't start up my ubuntu 11.10. Usually I suspend my notebook by closing cover but today I reboot it and it not starting up. Booting flowing by normal till to login screen but if I move mouse cursor after that image immediately switch to console (without any error; only normal loading startup processes) and back to login screen. I can type my password and boot continuing loading but after few moment it again switch back to dark console and switch again to login screen. I can load recovery mode but if I try touch my cursor (by mouse or internal notebook touchpad) it again switch back to console and to login screen. But if I use only keyboard it work fine. Where I can see detailed log information about my problem?

  Read the article

• Install tmux on Mac OS X

  - by unixben

  This is a short run down on how to get tmux running on your Mac OS X system. The same methodology applies when compiling this on Solaris. What is tmux? According to the developer's page, "tmux is a terminal multiplexer: it enables a number of terminals (or windows), each running a separate program, to be created, accessed, and controlled from a single screen. tmux may be detached from a screen and continue running in the background, then later reattached". Why not just use screen? For me, the primary reason I switched to tmux from screen is the much easier configuration syntax that tmux offers. If you've ever struggled with formatting screen's caption or hardstatus line, then you will appreciate the ease with which you can achieve the same results in tmux. Preparing your environment You will need a C compiler installed. I believe that OS X ships by default with GNU make, but if not, then you will need to obtain it or use Xcode. Download the sources While I'm putting all this together, I like to keep everything neatly tucked away in a build directory. mkdir ~/build cd ~/build curl -OL http://downloads.sourceforge.net/tmux/tmux-1.5.tar.gz curl -OL http://downloads.sourceforge.net/project/levent/libevent/libevent-2.0/libevent-2.0.16-stable.tar.gz Unpack the sources tar xzf tmux-1.5.tar.gz tar xzf libevent-2.0.16-stable.tar.gz Compiling libevent cd libevent-2.0.16-stable ./configure --prefix=/opt make sudo make install Compiling tmux cd ../tmux-1.5 LDFLAGS="-L/opt/lib" CPPFLAGS="-I/opt/include" LIBS="-lresolv" ./configure --prefix=/opt make sudo make install That's all there is to it!

  Read the article

• Javascript Open a Window Full Size (Mazimized)

  - by SAMIR BHOGAYTA

  function f_open_window_max( aURL, aWinName ) { var wOpen; var sOptions; sOptions = 'status=yes,menubar=yes,scrollbars=yes,resizable=yes,toolbar=yes'; sOptions = sOptions + ',width=' + (screen.availWidth - 10).toString(); sOptions = sOptions + ',height=' + (screen.availHeight - 122).toString(); sOptions = sOptions + ',screenX=0,screenY=0,left=0,top=0'; wOpen = window.open( '', aWinName, sOptions ); wOpen.location = aURL; wOpen.focus(); wOpen.moveTo( 0, 0 ); wOpen.resizeTo( screen.availWidth, screen.availHeight ); return wOpen; }

  Read the article

• How to fix Fullscreen focus error in Unity?

  - by Vagrant232

  Recently, I've been experiencing an error with programs that have a fullscreen mode with low resolution (80xx600 and below) in Unity. The problem isn't valid in gnomeshell. Whenever I launch an application, unity would enlarge the screen more than it should be and would only show me the upper left corner of the screen (I only see a magnified quarter of the screen). At first I thought that it was an issue related to wine but I later found out that native applications (such as world of goo) are affected as well. Apps that taken on the full screen but have a larger resolution don't face such an issue. Is it possible to get this fixed manually? Or do I have to wait for updates?

  Read the article

• Lubuntu 13.10 selected LX games desktop now can't login

  - by user111667

  I logged out of my normal desktop and selected LX games from the dropdown list and logged back in. This led me to a black screen and now I can't see the login screen in order to change back to my normal desktop. On startup the machine boots normally, the lubuntu splash screen shows up, then it goes to a black screen with nothing on it - not even a mouse cursor. I can bring up a terminal using ctrl+alt+F2. Is there a way via terminal to change my desktop environment back to its previous state? Or alternatively, is there a file I can edit where my preferred desktop is stored? (The machine is dual-booted so I can access the Lubuntu files from LXLE which is installed on a second partition). The machine in question is a Toshiba A200 laptop.

  Read the article

• LibGDX drawing map using tiles without space

  - by Enayat Muradi

  I am making a board game. To draw the map on the board I use different tiles. On some screen the map looks good but on some other screens there is a space between the tiles. How can I do so there won't be any space between the tiles? I am designing my game with the size 480x800. To fit other screens I stretch it. My tiles looks like this: I draw the map using a for loop to draw the tile in different (x,y) position on screen. Here is what I mean with space between tiles: Screen with 240x400 Screen with 360x600, here there is no spacing between tiles. I use camera and the screen to draw I don't use stage. I have also tried to use Viewport but I get the same results. cam = new OrthographicCamera();cam.setToOrtho(true, gameWidth, gameHeight); batcher = new SpriteBatch(); batcher.setProjectionMatrix(cam.combined); shapeRenderer = new ShapeRenderer(); shapeRenderer.setProjectionMatrix(cam.combined); How can I do to solve the problem?

  Read the article

• Toshiba satellite u400 hardware buttons, which software?

  - by Kugel

  I've recently intalled Windows 7 64bit onto my Toshiba U400 laptop. I went over to toshiba support-download-drivers page and downloaded every driver that was missing. I chose not to download bloated stuff, only the drivers. Win7 has much better control over hardware buttons out of the box then I had before. But there is one thing that annoys me. I have hardware button on the laptom that is supposed to switch LEDs on/off. Windows 7 turns my sound on/off instead. The second minor thing is, when I turn off sound by pressing Fn+Esc (or light off button;-), the sound is off, however any slight touch with volume wheel turns it right back on! This is something that Ubuntu does also out of the box. I wonder what's the logic behind this. Any lightweight solutions to these out there? Thank you

  Read the article

• How to fix slow wireless with Intel 4965 AGN? [closed]

  - by mikewhatever

  Possible Duplicate: Slow wireless with an Intel 4965 We run Ubuntu 12.04, 32bit, with the current kernel 3.2.27-generic on an MSI EX700. I've already added the 11n_disable=1 tweek, without whcih, wireless has been unusable. Now, it works OK, but speedtest shows: Windows XP - down 11.68mbps, up 2.07mbps Ubuntu 12.04 - down 2.06mbps up 2.0mbps We've disabled ipv6, tried static and dinamic IPs, tried both swcrypto=0 and swcrypto=1 options, none of whcih made any difference. The problem may be the symptom of high packet loss. For example, here's the output of iwconfig after booting and testing the speeds: wlan0 IEEE 802.11abg ESSID:"amu" Mode:Managed Frequency:2.462 GHz Access Point: 00:78:9E:FA:32:C8 Bit Rate=54 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=58/70 Signal level=-52 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:11 Invalid misc:3627 Missed beacon:0 I've posted a help request before with lots of technical info and outputs.

  Read the article

• Second Monitor Detected, but not receiving a signal after upgrading to 12.04

  - by user62458

  After I upgraded to 12.04, my second monitor is detected (in display settings), but will not power on. I have scoured the Internet and forums for a solution and I can't find anything. I have found a couple people with the same problem, but never a solution for it. I am no expert, but I'm certainly not a noob. My computer uses AMD Radeon 6250 graphics, but I do NOT want to use the proprietary graphics drivers. They refuse to work properly with my second monitor (they ATI drivers will only mirror screens, and I've done everything to try to fix it, and I DON't want mirrored screens) Not to mention that the default open-source video drivers seem to work much better than the proprietary anyway! Again, Ubuntu's default video drivers work fine, and they even DETECT the second monitor (Dell 19'). I can drag stuff off the screen and put it on the 'space' of the second monitor and even a screen-shot shows that there are two monitors active; but the monitor is OFF. It will not power on. It goes into 'power-save' mode because it is not receiving a signal. For some reason it is not getting the signal to power on, even though Ubuntu thinks the monitor is working properly. I had this working fine on my Sony VAIO yesterday (with Radeon graphics/default Ubuntu video drivers). I upgraded to a Samsung Series 3 and now I have this issue. I can't for the life of me figure out why the monitor is connected, detected and I have screen space for the monitor, but the screen won't turn on! XRANDR Output: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected (normal left inverted right x axis y axis) 1440x900 59.9 + 75.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.1*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 HDMI-0 disconnected (normal left inverted right x axis y axis)

  Read the article

• Installing Ubuntu on virtualbox with a windows 8 host

  - by ubershmekel

  Installing ubuntu-13.10-desktop-i386.iso gets me to the graphical login screen but after I enter the password I get a black screen. Ctrl-Alt-F2 brings me to a terminal where I can restart lightdm, enter my password again to see another black screen. The screen saver can actually kick into action there and I was told to update packages, but no unity or other ui, just blackenss. The host is windows8-x64 and Virtualbox 4.3.2. I tried installing ubuntu-12.04.3-desktop-i386.iso but that hung during setup. Is there a way to debug? I'm now trying to install Debian to see if that works but wow the network installer takes its sweet time... Update: Debian does work though it gives me a notification that Gnome 3 failed to load. The visual desktop works though so I don't know if there was a substantive problem.

  Read the article

• Sorting for 2D Drawing

  - by Nexian

  okie, looked through quite a few similar questions but still feel the need to ask mine specifically (I know, crazy). Anyhoo: I am drawing a game in 2D (isometric) My objects have their own arrays. (i.e. Tiles[], Objects[], Particles[], etc) I want to have a draw[] array to hold anything that will be drawn. Because it is 2D, I assume I must prioritise depth over any other sorting or things will look weird. My game is turn based so Tiles and Objects won't be changing position every frame. However, Particles probably will. So I am thinking I can populate the draw[] array (probably a vector?) with what is on-screen and have it add/remove object, tile & particle references when I pan the screen or when a tile or object is specifically moved. No idea how often I'm going to have to update for particles right now. I want to do this because my game may have many thousands of objects and I want to iterate through as few as possible when drawing. I plan to give each element a depth value to sort by. So, my questions: Does the above method sound like a good way to deal with the actual drawing? What is the most efficient way to sort a vector? Most of the time it wont require efficiency. But for panning the screen it will. And I imagine if I have many particles on screen moving across multiple tiles, it may happen quite often. For reference, my screen will be drawing about 2,800 objects at any one time. When panning, it will be adding/removing about ~200 elements every second, and each new element will need adding in the correct location based on depth.

  Read the article

• Dual monitor display 12.04?

  - by MrMonty

  I have 2 beautiful 27" asus monitors. I started trying out Ubuntu 12.04 and now only one works and thats vga .. Any help here cause I'm stumped. I have a bfg tech nivida Geforce 8800 gt 512mb and I'm trying to fix this. Getting this error Wen i try to configure the xorg file Failed to set MetaMode (1) 'DFP-0: 1280x1024 @1280x1024 +0+0, DFP-1: 1280x1024 @1280x1024 +1280+0' (Mode 2560x1024, id: 50) on X screen 0. ........................................................................................... This is the xorg.conf ....................................................... nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Removed Option "Xinerama" "1" Removed Option "Xinerama" "0" Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Removed Option "TwinView" "1" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection FILE ^^^^

  Read the article

• Ubuntu 12.04 crashes on startup for newer versions of Linux, possibly related to WiFi

  - by Jake

  My computer gets to the screen with the Ubuntu logo and the orange/white dots, and then the screen goes black, spits out a lot of error messages, and cannot boot. (If it'd be helpful, I can take a photo of my screen in this state.) I've found I can successfully boot if my wireless card is turned off. As soon as I turn it on, my computer crashes with the same black screen of death. I can also successfully boot if I choose "Previous Linux Version" and select a few versions back (I think 3.0.6). Here are some relevant details about my setup: Ubuntu 12.04 Computer: Lenovo x230 Wireless: Realtek RTL8188CE 802.11b/g/n WiFi Adapter Processor: Intel Core i5-3210M CPU @ 2.50GHz × 4 RAM: 16 GB of RAM Thank you!!!

  Read the article

• HDMI signal interrputs after 10 minutes plugged in a TV

  - by desert_unbound

  Ubuntu 11.10, Dell Inspiron N4050, VLC, Jupiter I'm trying to watch movies through HDMI output on a TV, with VLC, with the notebook unplugged from AC (but with enough battery for 2-3 hours of use), just with TV display (the notebook display stays off) And from 10 to 10 minutes, the TV turns black, and according to the TV, the HDMI cable is unplugged. But using the touchpad makes the screen appear again. In "screen" options, on system settings, i've set the screen to never turn off, and never reduce brightness using battery. In "power" settings, i've set to not suspend when using battery. In Jupiter, i've set (while trying to watch the movie) to work in maximum performance. I'm pretty sure it's not VLC, because i've set it to override power options and screensaver options (and also im not using xscreensaver). Also the movie continues, when the screen is black Maybe there's something that i'm missing? When i plug the HDMI in the notebook, i use jupiter to change the display (using the option "external display only")... maybe is that ?

  Read the article

• How do I draw a scrolling background?

  - by droidmachine

  How can I draw background tile in my 2D side-scrolling game? Is that loop logical for OpenGL es? My tile 2400x480. Also I want to use parallax scrolling for my game. batcher.beginBatch(Assets.background); for(int i=0; i<100; i++) batcher.drawSprite(0+2400*i, 240, 2400, 480, Assets.backgroundRegion); batcher.endBatch(); UPDATE And thats my onDrawFrame.I'm sending deltaTime for fps control. public void onDrawFrame(GL10 gl) { GLGameState state = null; synchronized(stateChanged) { state = this.state; } if(state == GLGameState.Running) { float deltaTime = (System.nanoTime()-startTime) / 1000000000.0f; startTime = System.nanoTime(); screen.update(deltaTime); screen.present(deltaTime); } if(state == GLGameState.Paused) { screen.pause(); synchronized(stateChanged) { this.state = GLGameState.Idle; stateChanged.notifyAll(); } } if(state == GLGameState.Finished) { screen.pause(); screen.dispose(); synchronized(stateChanged) { this.state = GLGameState.Idle; stateChanged.notifyAll(); } } }

  Read the article

• How to Create a Grid for a 2D Game?

  - by SoulBeaver

  So I'm currently writing the engine for my videogame. I've almost integrated Tiled (I think) so I should have a map-creator here soon. My question is, how do I actually make the grid? I'm really confused here. If I create a large map with, say, 20x20 grids the size of 32x32 (screen size 640x640), then what do I do with it? Let's say I have the code for creating a window, and then place a player sprite that I can move with input, that's fine. If I use one map that's as big as the screen, then every pixel on the map is also a pixel on the game screen. The mapping is exact. Now what happens if I have a 2000x2000 map, for example? My character would have to keep moving and move the map around (or rather the camera focused on the player moves). Then I can no longer say that the screen maps exactly to the pixel position of the map. I tried making a Grid class that maps out the screen area to 32x32 tiles, but I'm not sure if that makes any sense. Once the map moves each tile would have to update its information, or something. I'm just really confused here. How do I actually make the tiles and a grid and map them to the data I get from tiled, or that I make myself? Are there any good examples of source code that I could look at?

  Read the article

• Windows 7 changes desktop icon location when switching from External Monitor to Internal Monitor (laptop)

  - by Gareth Jones

  I have a Windows 7 Laptop, and lately its been acting really weird with my 1080p Monitor. When I get home from school, Ill plug my screen in, and close my laptop lid (which makes the laptop treat the Monitor as the primary and only screen). However it will move my desktop icons! This also happens when I remove / unplug the screen, as shown in the pictures. I hate this, as Im the kinda person who's use to every icon being in a set spot, and so am use to their location. Its a massive hassle to try and move the icons back to their original spot. Anyone have any ideas on how to fix this? Thanks P.S it could be due to the resolution of the screen's being different, but this never happened before in the past Icons on External Moniter (after having moved them manually back into place): Icons after unplugging external monitor (and so using Laptop screen):

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >