Search Results

Search found 7843 results on 314 pages for 'power over ethernet'.

Page 182/314 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• Trouble joining Windows Server 2008 to Domain

  - by Jim R

  When I try to join my new server to my existing domain I get the following error: "An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resove DNS names in the target domain." I have tried all of the following already: Successfully pinged the domain controller. Ping the new server from the domain controller by IP address and by DNS name. Ping the DC server from the new server by IP address and by DNS name. Changed the network to DHCP (it was originally static). No joy as static or DHCP. Turned off all firewall settings. Added the domain name to 'hosts' file. Added the server name of the primary domain controller to the 'hosts' file in the new server. Any ideas? Thanks in advance for any help! Jim Update: With help from J. Brian Kelly (Thanks) I have managed to narrow down the problem to a DNS issue. Specifically, UDP/53 packets are being sent (they are seen in Network Monitor), but are not getting to the DNS server. But, I do not yet know why. Update: The quested output from IPCONFIG for the HyperV host and the virtual machine. IPCONFIG from HyperV Server Windows IP Configuration Host Name . . . . . . . . . . . . : HYPER Primary Dns Suffix . . . . . . . : sfi-wfc.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi-wfc.com Ethernet adapter Local Area Connection 4: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Primary Network Physical Address. . . . . . . . . : 00-30-48-CA-CC-7A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd16:3ac2:3d4f:e275%679(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.100.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.100.10 DHCPv6 IAID . . . . . . . . . . . : -1476382648 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-10-20-E9-00-30-48-CA-CC-7A DNS Servers . . . . . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Intel(R) 82576 Gigabit Dual Port Network Connection #2 Physical Address. . . . . . . . . : 00-30-48-CA-CC-7B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPCONFIG from Virtual Machine Windows IP Configuration Host Name . . . . . . . . . . . . : DB Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-66-03-02 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.100.128(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, August 29, 2009 10:44:45 AM Lease Expires . . . . . . . . . . : Tuesday, September 01, 2009 3:08:33 PM Default Gateway . . . . . . . . . : 192.168.100.10 DHCP Server . . . . . . . . . . . : 192.168.100.5 DNS Servers . . . . . . . . . . . : 192.168.102.5 Primary WINS Server . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 8: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : isatap.sfi Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• Can't access some websites with any browser

  - by Charles Kingsmill

  I'm running Windows 7 64-bit on a new Samsung laptop and accessing the internet okay via ethernet cable to my university's ISP. Some sites work fine (e.g. google.com) but I can't access others at all (microsoft.com, topshop.com). I can't connect to those sites in safe mode with networking. And ping and tracert both fail. There's no proxy. Other users can connect successfully to these sites using my cable and socket. I've tried all the following with no success: using various browsers (IE9, FF, Chrome) creating a new user updating drivers clearing the DNS cache using OpenDNS and Google's DNS turning off Avast tweaking the MTU running MS malicious software removal tool running Spybot S&D reviewing the hosts file disabling the IPv6 options repairing / resetting winsock settings disabling advanced javascript options I have run out of ideas... can anyone see anything I've missed??!

  Read the article

• Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

  - by Ray

  Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

  Read the article

• Looking for a good 16 to 24 gigabit switch for home office

  - by MartinB

  Hi I currently working on my new home office and I want to take that occasion to wire some parts of my house with cat6 Ethernet. To make all this work, I'm looking for a gigabit switch with at least 16 ports (but I would prefer 24 to have some room to grow) that is reliable and quiet. I've about 250$ to put on that. The options I'm looking for now are - DLink 1024D - Netgear JGS524 Would you recommend (or not) one of these switches ? Have you some other suggestions ? Thanks

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• sniffing on a switched LAN

  - by shodanex

  Hi, I often find myself in the position of having to sniff on a connection between for example an arm board I am developing on, and another computer on the network, or out of the network. The easy situation is when I can install a sniffer on the computer talking to the embedded device. When it is not possible, I currently install an old 10Mb/s HUB. However I am afraid my HUB might stop working, and I would like to know some alternative. Here are the alternatives I could think of : Buy another HUB. Is that still possible ? Have some sort of ethernet sniffing bridge, like what they do for USB. I am afraid this kind of device is expensive. use ARP poisoning.

  Read the article

• Local Area Connection in Slacware 13

  - by asdasd

  I have windows xp and slackware 13 on one computer, and the ISP provided me a new modem. There was manual how to configure it, so i start the web browser and typed it's ip address 192.168.1.1 and the web interface of the modem appeared so i logged in, that was easy. But under slackware, i don't know how to enter in the modem config / web interface. I type in 192.168.1.1 but it's not working. Here's the output of ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:a1:b0:01:18:28 inet addr:169.254.73.8 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:febff400-febff4ff How can i log in into the modem from linux, i.e. find it's assigned ip under slackware ? Thank you.

  Read the article

• remote desktop over wireless

  - by tbischel

  So I'm trying to run remote desktop on my laptop to connect to my home desktop. I have a problem where this works fine if I connect my laptop with an ethernet cable, but fails when I try to use wireless internet access (which works fine for normal internet surfing). I've experienced this problem at home with my wireless router, and at work with the wireless network they have there, so I'm inclined to believe that its a setting local to my machine rather than the router blocking the requests... but I'm not sure where to look. Any suggestions?

  Read the article

• Belkin router issue

  - by walr1

  Hi, My cousin and I bought a wireless Belkin router for testing purposes. Please keep in mind for all of our tests there is no ethernet cable plugged in, just the router's power cord. We have been trying to "flood" it with PING requests on its default address 192.168.2.1, but it isn't doing a thing; not even logging any attempts of too many requests. I've disabled the firewall, disabled PING request block, etc. Any idea why this thing isn't being affected? We sent 4 million packets and it hasn't done a thing. Quite odd! Thanks.

  Read the article

• File sharing from a cable connected pc to wifi connected laptop (windows 7 ultimate)

  - by Aiden Jones

  I have a one desktop running windows 7 ultimate connected to Ethernet cable. And I want to share folder to another wifi connected laptop (also windows 7 ultimate). Both machines are on the same home internet connection. I have tried to share folders by going to properties sharing advanced sharing permissions checked all the boxes to allow all but I don’t see any shared files on my laptop. I know it’s possible to share folders between two Wi-Fi connected machines but how can it be done when one pc is cable connected and other is Wi-Fi connected on the same internet connection.

  Read the article

• Why does changing the physical socket on your router cause delays?

  - by Josh Browning

  My question involves the delays involved with changing which physical socket your ethernet cable is connected to. I am aware that if you are connected to a router on a network and then change which physical socket on that router you are using you will gain very small additional delays initially. However I am curious as to what causes these delays. I originally thought it was to do with the infromation stored in the routing table and whether that was allocated to a specific socket on the router or not. Although, if your IP address is the same then I don't understand why there would be delays because I would of assumed that any information within the router was linked to an IP address rather than a physical socket.

  Read the article

• Virtual Hosting in RHEL 5

  - by Kumar P

  We have a RHEL 5 Linux server with a few Windows XP clients. We provide web development in PHP. Now my developers as for common local PHP server for keep their projects in same place. Currently the proxy server and Samba sharing are running on the RHEL 5 server. I installed httpd, PHP and MySQL in the server. And I would like to configure virtual hosting too for LAN. What I want do for it? We have 2 Ethernet ports in the server, 1 for local connections and another one for Internet. Internet is provided by an ADSL provider. (192.168.0.0 series for ADSL modem connection and 10.1.1.0 for the LAN connection. If I want to use virtual hosting, do I need to setup local DNS server? My requirements are: setup PHP with MySQL server for local clients with multiple hosting, without disturbing proxy and Samba.

  Read the article

• XFS disk becomes unavailable after a while

  - by Guard

  Ubuntu 12.04 (but the same was on 11.10 before upgrading) WD MyBook, 2TB, no RAID (or RAID0, not completely sure, anyway no mirroring, both 1TB disks are in use, mounted as a single device). Formatted to XFS, normally used for big movie files. Connected to Firewire 800. At some point the LED started going up and down as when constantly reading/writing. The device gives access error. When unplugged (cable, then holding the power button for a while, then unplugging the power) and re-connected becomes available. xfs_check with no results. xfs_repair did something, but looks like didn't fix any error. Then after a massive read (checking 1.5GB torrent file for integrity) becomes unavailable again. Any ideas what's wrong? Drives? Cables? Motherboard? OS? UPD: not sure how relevant this is, but here are dmesg output [14380.632816] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [14380.633356] SGI XFS Quota Management subsystem [14421.812220] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [14441.890596] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [14441.896858] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [14453.895347] firewire_core: created device fw1: GUID 0090a99500a35518, S400, 9 config ROM retries [14453.904818] scsi6 : SBP-2 IEEE-1394 [14453.905014] scsi7 : SBP-2 IEEE-1394 [14454.139993] firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries) [14454.158769] scsi 6:0:0:0: Direct-Access WD My Book 1015 PQ: 0 ANSI: 4 [14454.159251] sd 6:0:0:0: Attached scsi generic sg3 type 0 [14454.162391] firewire_sbp2: fw1.1: logged in to LUN 0001 (0 retries) [14454.167453] sd 6:0:0:0: [sdc] 3907017568 512-byte logical blocks: (2.00 TB/1.81 TiB) [14454.178822] sd 6:0:0:0: [sdc] Write Protect is off [14454.178826] sd 6:0:0:0: [sdc] Mode Sense: 10 00 00 00 [14454.186830] scsi 7:0:0:1: Enclosure WD My Book Device 1015 PQ: 0 ANSI: 4 [14454.186995] scsi 7:0:0:1: Attached scsi generic sg4 type 13 [14454.190078] sd 6:0:0:0: [sdc] Cache data unavailable [14454.190087] sd 6:0:0:0: [sdc] Assuming drive cache: write through [14454.202176] sd 6:0:0:0: [sdc] Cache data unavailable [14454.202185] sd 6:0:0:0: [sdc] Assuming drive cache: write through [14454.239940] sdc: [mac] sdc1 sdc2 sdc3 sdc4 [14454.271262] sd 6:0:0:0: [sdc] Cache data unavailable [14454.271270] sd 6:0:0:0: [sdc] Assuming drive cache: write through [14454.271354] sd 6:0:0:0: [sdc] Attached SCSI disk [14454.272149] ses 7:0:0:1: Attached Enclosure device [14606.090024] XFS (sdc3): Mounting Filesystem [14612.048343] XFS (sdc3): Starting recovery (logdev: internal) [14620.697636] XFS (sdc3): Ending recovery (logdev: internal) [14748.120957] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [14748.120963] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [14752.568382] uhci_hcd 0000:00:1a.0: PCI INT A disabled [14752.568579] uhci_hcd 0000:00:1a.1: PCI INT B disabled [14752.568738] ehci_hcd 0000:00:1a.7: PCI INT C disabled [14752.568779] ehci_hcd 0000:00:1a.7: PME# enabled [14752.584526] uhci_hcd 0000:00:1d.1: PCI INT B disabled [14752.584689] uhci_hcd 0000:00:1d.2: PCI INT C disabled [14752.680079] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xe4641000-0xe46413ff] (PCI address [0xe4641000-0xe46413ff]) [14752.680104] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b) [14752.680136] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [14752.680170] ehci_hcd 0000:00:1a.7: PME# disabled [14752.680182] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [14752.680190] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [14752.710334] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [14752.710342] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [14752.749186] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [14752.749194] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [14752.790231] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [14752.790239] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [14752.829170] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [14752.829178] uhci_hcd 0000:00:1d.2: setting latency timer to 64

  Read the article

• RTL8168B/8111B Lan card is not detected in Redhat..Error is make ***/lib/modules/2.6.18-53.e15/build

  - by Deepak Narwal

  0 Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1.Redhat is not picking up this model of Lan card automaticlly. I tried it by downloading from realtak site for this particular model and find some .tar packages for my kernal and when i tried to install them ... check old drivers & unload it build the module and install make */lib/modules/2.6.18-53.e15/build: no such file or directory stop make[1]: *[modules] error 2 make : [modules] error 2 i downloaded tar files from sites and unpack according to their instrution i tried to run autorun.sh script as mentioned in readme file but after doing this it is showing above error... Now what to do i am not getting

  Read the article

• Windows XP periodically disconnects, reconnects; Windows 7 doesn't

  - by einpoklum

  My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it doesn't happen. The connection is smooth (OS is sluggish though, but never mind that). Like I said, I updated the NIC driver. I tried reducing the MTU (used something called Dr. TCP), thinking maybe that would help, but it didn't. (I'm a bit but not super-knowledgeable about TCP parameters.) I'm guessing it's either a problem with the driver or some settings which are different between the two OSes. ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• Why is my eth0 getting a dynamic ip when it is configured to be static?

  - by sdek

  For some reason our office linux box is being assigned an ip address via dhcp and I don't know why. What is confusing to me is that when I check system-config-network it shows that my eth0 is setup to be a static ip address. And /etc/sysconfig/network-scripts/ifcfg-eth0 also shows it is setup to be a static ip, yet it is getting a different ip address than the one specified in the ifcfg-eth0. Let me know if you have any suggestions on or ideas on where I can look next. Here are a few details that might help you figure out what an idiot I am :) Fedora 11 Router in front of this box is running dhcp, starting at 10.42.1.100 This box is configured to be 10.42.1.50 (at least I think it is!), subnet 255.255.255.0 (which is same as the router's lan subnet) Instead of having the static IP, this box is getting assigned 10.42.1.100. Here are the ifcfg-eth0 details DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no NM_CONTROLLED=no NETMASK=255.255.255.0 IPADDR=10.42.1.50 GATEWAY=10.42.1.1

  Read the article

• Creating an office network and monitoring all activity without a proxy

  - by Robert

  We are setting up our office network and would like to track all the websites visited by our employees. However, we would not like to use any proxy based solutions. Our work is highly dependent on applications in which you cannot configure a proxy. Hence, the approach we would like to follow is setting up a router inside a computer (something like this : http://www.techrepublic.com/article/configure-windows-server-2003-to-act-as-a-router/5844624) This will also allow us to attach multiple ethernet cards and have redundancy in internet connectivity with complete abstraction from the user about which connection is being used. But most importantly, since all the traffic will be going through the computer (configured as a router) I assume there will be a way to run packet analysis on all the request / responses being made. For example, list all the FTP servers connected to (port 21), give a graph of all the URLs visited per day by frequency. Is there already a software which does this ? Or is it possible to build something like this ?

  Read the article

• vnc connection from linux to windows ce

  - by JosiP

  Im having troubles while im trying to connect from linux to Windows CE, via VNC viewer. Here is what i can see on log: /usr/bin/vncviewer 10.1.1.57 VNC Viewer Free Edition 4.1.2 for X - built Apr 20 2011 12:04:25 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Tue Jul 2 12:15:04 2013 CConn: connected to host 10.1.1.57 port 5900 CConnection: Server supports RFB protocol version 3.5 CConnection: Using RFB protocol version 3.3 TXImage: Using default colormap and visual, TrueColor, depth 24. CConn: Using pixel format depth 6 (8bpp) rgb222 CConn: Using ZRLE encoding I cannot see anything - only black screen. Restarting device does not help. Device is connected directly to machine by crossed ethernet cable, and its IP is assigned by DHCP. Any clues, ideas, what can i do to get normal view ? best regards J.

  Read the article

• What is blocking incoming packets to port 67?

  - by Peter Robertson

  I have a DSP connected to a Windows 7 laptop by Ethernet. The laptop has all firewalls disabled (I've even tried stopping the Windows firewall service and DHCP). The DSP is sending well-formed BOOTP broadcast packets every 3 seconds to port 67. Wireshark running on the laptop sees these BOOTP packets coming in. I have a program running on the laptop with a socket successfully bound to port 67. I can see this using CurrPorts.exe. Nothing else is shown as accessing port 67. The program never sees any packets coming in. If I run a program in the DSP that sends ordinary UDP packets to port 67, Wireshark sees them coming in and reports that they are corrupt BOOTP packets, but now, my program gets them. Any idea what's going on here?

  Read the article

• CentOS: eth0 not starting on boot

  - by Cameron Aziz

  Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

  Read the article

• Which protocol do clients use when communicating with servers in a SAN

  - by Mario De Schaepmeester

  I'm trying to wrap my head around how a SAN works and how it is implemented. If I understand this well, clients wanting to access the storage devices in a SAN need to communicate with the servers via the LAN. When the SAN is implemented with Fibre Channel, these servers are Fibre Channel compliant devices, and internally in the SAN they work with the Fibre Channel Protocol. Both data and communications are supported by Fibre Channel. But which application-layer protocol do the clients use in the LAN to communicate with the servers? Is the data simply transferred via ethernet as well? This is some part I am stuck on. I went trough a lot of sources but most sources don't really mention protocols and if they do, they only mention FCP.

  Read the article

• Encrypt LAN and wifi traffic on small private network

  - by Grimlockz

  I need some advice about encrypt all traffic on a small private network running wi-fi and LAN traffic on 192.168.0.x network. The network would comprise of client laptops connecting to the wi-fi router (192.168.0.254) via ethernet connection or wireless. The main purpose of the server is for the client laptops to talk to two servers on different IP's (192.168.0.200 and 192.168.0.201) on ports 80 and 433. My main concern is having packet sniffers and what not getting access to the data. The only ways I see at the moment is to have VPN running on the network or use IPSec policy's to do this. Any other ways guys?

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >