Search Results

Search found 12484 results on 500 pages for 'seraphims host'.

Page 182/500 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• Cisco SG200 vlan issue in ESXi VSA cluster

  - by George

  I have three Cisco SG200-26 switches, and I also have two ESXi hosts that I have connected like shown in the below "best practice" map by VMware: http://communities.vmware.com/servlet/JiveServlet/previewBody/17393-102-1-22458/VSA_networking_map.pdf Even though I created the VLANs in the SG200 and I set the two VLANs (508 and 608) as allowed for these untagged ports (where my ESX NIC's are connected), I can not ping from host 1 to host 2 when configuring the NIC's to use 608 VLAN. Am I missing something? my IP's are all in the 192.168. range, and the only reason I need the VLANs is to isolate the traffic of VSA back-end internally, only the two hosts will be using the VLANs. So I think I do not have to create virtual interfaces on my router since that's the case, is my understanding correct? Also sending my switch config screenshot below.. all 3 switches have the latest firmware (it seems these were originally linksys and got rebranded as cisco after the acquisition) http://img31.imageshack.us/img31/2503/switch.gif Any ideas what to change on the Cisco SG200 to make this work , would be appreciated! The second VLAN (608) only needs two IP's: 192.168.0.1 and 192.168.0.2 The first VLAN (508) will have about 15 IP's for ESXi Management and VSA cluster service, I could use either 192.168.1.xx or 10.0.1.xx The rest of my network (about 50 clients) is in 192.168.1.xx range VMware also states that the VLAN protocol on the physical switch must be 802.1Q, not ISL, anyone knows which of the two my SG200-26 uses? In addition to that, the only requirement from VSA is that my two hosts: -Are in the same subnet. -Have static IP addresses set. -Have the same Default Gateway configured. If I need inter-vlan routing for this, I suppose I have to create virtual interfaces on my sonicwall, and assign an IP for each VLAN, and then set routes between them? Thank you for your time!

  Read the article

• IIS serving static content gives 503 at random

  - by Steffen

  We're having a few issues with our image server. It's a Win 2008 running IIS 7.5 and it only serves static content: images. It has run without issues for quite a while, until recently when we disabled Output Caching, as we noticed having it enabled meant it sent no-cache host-headers to the clients (forcing them to fetch the images from the server every time) We've read quite a bit about it, and it seems IIS just works that way - either you use Output Caching or you get to use cache host-headers. Anyway having disabled the Output Cache, we now experience random 5 minutes intervals, where all requests just get a 503 Service Unavailable. During this period the "Files cached" performance counter staggers (neither increased nor decreased) and after the period all caches are flushed. You might find it weird I talk about caching, since we disabled Output Caching. The thing is we changed the ObjectTTL parameter in registry, so we cache files for 3 minutes (which has worked very well, our Disk I/O dropped significantly) So even with Output Caching disabled, we're still caching plenty of files - if we could just get rid of the random 503 it'd be perfect :-D We don't get any messages in the Windows event log during these 503 intervals, so we're pretty stumped as to what to do. Any ideas are very welcome :-)

  Read the article

• Problem while Installing mysql cluster

  - by Champion

  I downloaded latest mysql cluster file 64 bit (mysql-cluster-gpl-7.1.9-linux-x86_64-glibc23) from mysql site. Ran following command to install mysql server. /home/mysql_cluster/mysqlc/scripts/mysql_install_db --no-defaults --basedir=/home/mysql_cluster/mysqlc --datadir=/home/mysql_cluster/my_cluster/mysqld_data It's giving following issues. /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Neither host 'db' nor 'localhost' could be looked up with /home/mysql_cluster/mysqlc/bin/resolveip Please configure the 'hostname' command to return a correct hostname. If you want to solve this at a later stage, restart this script with the --force option My host is pinging and hostname command gives correct hostname. I tried also with --force option force but still not working giving following issues: /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Installing MySQL system tables... /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 393: /home/mysql_cluster/mysqlc/bin/mysqld: No such file or directory Installation of system tables failed! Examine the logs in /home/mysql_cluster/my_cluster/mysqld_data for more information. It says above files doesn't exist but this files are present checked with ls command. We are using XEN VM with 64 bit debian lenny os. How this issue can be resolved ?

  Read the article

• port forwarding with VirtualBox

  - by Argh

  I have a virtualbox VM running ubuntu. The Ubuntu guest is running a web server which listens on port 3000 (http://127.0.0.1:3000) The host machine is windows vista. I have configured port forwarding using VBoxManage. If I query the config using VboxManage getextradata "MyMachine", I get Key: GUI/AutoresizeGuest, Value: on Key: GUI/Fullscreen, Value: off Key: GUI/LastCloseAction, Value: shutdown Key: GUI/LastWindowPostion, Value: 9,34,640,529,max Key: GUI/MiniToolBarAlignment, Value: bottom Key: GUI/MiniToolBarAutoHide, Value: off Key: GUI/SaveMountedAtRuntime, Value: yes Key: GUI/Seamless, Value: off Key: GUI/ShowMiniToolBar, Value: yes Key: VBoxInternal/Devices/pcnet/0/LUN#0/Config/guesthttp/GuestPort, Value: 3000 Key: VBoxInternal/Devices/pcnet/0/LUN#0/Config/guesthttp/HostPort, Value: 3000 Key: VBoxInternal/Devices/pcnet/0/LUN#0/Config/guesthttp/Protocol, Value: TCP This looks like it should work... However when I try to access the web server from the host machine (windows box) I dont get a response. I ran a netstat on the windows box and nothing appears to be listening on port 3000 which explains why forwrding isnt working. Note that I have already tested with my firewall switched off... The version of VirtualBox I am using is 3.1.4 Any ideas?

  Read the article

• Exim rejects recipient address on my domain

  - by Nicolas

  Hi, I have a dedicated server (debian) on which I have installed Exim and Dovecot. Everything worked fine until around a month ago. I tried to reinstall and reconfigure exim but I keep having all the incoming emails rejected. Outlook says: A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after RCPT TO:: host mail.mydomain.com [94.76.##.##]: 550 relay not permitted GMAIL: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). On the server side, my rejectlog file shows: 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted ... and the mainlog file: 2011-01-04 17:00:01 1PaAEr-0007vN-DX <= root@ETC_MAILNAME U=root P=local S=869 2011-01-04 17:00:01 1PaAEr-0007vN-DX ** root@etc_mailname: Unrouteable address 2011-01-04 17:00:01 1PaAEr-0007vY-Kn Error while reading message with no usable sender address (R=1PaAEr-0007vN-DX): at least one malformed recipient address: root@ETC_MAILNAME - malformed address: _MAILNAME may not follow root@ETC 2011-01-04 17:00:01 1PaAEr-0007vN-DX Process failed (1) when writing error message to root@ETC_MAILNAME (frozen) 2011-01-04 17:09:21 no IP address found for host MAIN_RELAY_NETS (during SMTP connection from mail-qw0-f53.google.com [209.85.216.53]) 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted then after the message becomes frozen: 2011-01-04 17:28:44 1PaAEr-0007vN-DX Message is frozen Thank you for your help, any idea/comment is welcomed as I am really running out of idea to fix this issue, Nicolas. Oh and the PHP mail() function does not do anything as well, would it be linked to? I think mail() uses sendmail from my php.ini.

  Read the article

• When using procmail with maildir, it returns error with code I found

  - by bradlis7

  I'm not an expert at procmail, but I have this code: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user, sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Thanks for the help.

  Read the article

• r1soft agent is failing with the error: "write error while sending code: Broken pipe"

  - by curiousguy

  I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

  Read the article

• ESXi 4.0 Guests Locking up

  - by Brendan Sherwin

  I installed ESXi 4.0 on an HP Proliant g5 with a 64bit Xeon processor and took advantage of the free license as I work for a public school. I created two instances of server 2003 from scratch, one to be the DC, DHCP, the other to be a file server and DNS/DHCP backup. I had both guests up and running fine, setup my user accounts, transferred the data, etc etc. Once I joined a client machine to the domain, I would find that both of my Windows guests would lock up. Sometimes it would be for five or so minutes, once it was overnight. The "locked up" state means that as far I could tell, all services were stopped; dhcp no longer handed out IP's, DNS stopped working, I couldn't RDP into the server. The ESXi host, my HP server, was still running fine. VSphere was working, and I could look at the performance of the individual guests.I would try Powering off the hosts from inside VSPhere, and the hosts would start powering off, but get stuck at 95%, and stay that way, sometimes only for 10 minutes, others for hours. Several times I had to restart ESXi from it's console in order to restart my machines. Now, can anyone tell me what is happening, and how I can fix it, or take steps to prevent it? I hired a consultant to come take a look at it, someone who's experience and knowledge I trust, and he told me he had never seen anything like this ever before. He spoke to a friend of his who is VM certified, and he also said he had never heard of this issue. Thanks for your replies, and I'll do my best to respond ASAP. Currently, the server is powered off, and I've reinstituted my nine year old Server 2000 boxes, and I'm considering installing ESXi 3.5. Does anyone know a host created in 4.0 will work in 3.5? I'd really like to avoid having to rebuild those accounts! I know 4.0 works on this server, as I have another server in another school with the same exact hardware running 4.0 fine. Brendan

  Read the article

• mod_wsgi, .htaccess and rewriterule

  - by hadaraz

  I'm using several django projects running on the same apache instance through mod_wsgi, configured with virtualhost for each site, see the httpd.conf here. For one of the sites I want to use static-cache (staticgenerator), so I set up a directory with .htaccess file which contains: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}/index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] where 3456 is the django port on the server. Using this rewrite rule, the request is always forwarded to the mod_wsgi handler, even if the file or directory exists, and if the file index.html exists the request shows as request-path/index.html. I tried another setup: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond $1 !-d RewriteCond $1index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] but got almost the same results. All requests are transferred to the mod_wsgi handler, but the request path is now the original one. To sum it up: What is the correct RewriteCond to use here? How do you transfer a request to the mod_wsgi handler? Is it the right way? If that's not the way to do it, then how do you serve static files from a directory when they exist, and when they don't you serve from apache/mode_wsgi? Thanks for your help.

  Read the article

• Weird routing issue

  - by Joel Coel

  I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

  Read the article

• Bind9 zone files

  - by user42780

  Well for the better part of the last two hours I've tried to figure out what is actually wrong, but I can't seem to find anything obvious to me. What I'm trying to do is setup my DNS for say(per example) domain.com. This should include two NS records, namely ns1.domain.com and ns2.domain.com. With that there should be a mail record, as well as a CNAME record for www. I've been trough roughly 20 how to's in the last two hours, rewrote everything from scratch four times and I still can't seem to find whats wrong. My only suspicion to this might be two things; the error I get from the bind9 daemon when I stop the service, and the named.conf file. The error I get from the bind9 daemon when stopping the service is: * Stopping domain name service... bind9 rndc: connection to remote host closed This may indicate that * the remote server is using an older version of the command protocol, * this host is not authorized to connect, * the clocks are not syncronized, or * the key is invalid. I honestly doesn't know what this means, apart from the key defined in /etc/bind/rndc.key that's not in the named.conf file(yes, I did try to add it to no avail). Here's all the zone files, and configuration files; http://208.77.101.5/bind9/ If anyone could help, it would be greatly appreciated.

  Read the article

• HP Storageworks 448 tape drive input/output error with Ubuntu

  - by Dan D

  I'm trying to set a backup to tape of a machine using flexbackup. However any attempt to write to the tape drive (via either flexbackup or just tar) results in "/dev/st0: Input/output error" The machine seems to recognise the drive (HP Storageworks Ultrium 448) and that there's a tape in it and "mt status" seems to work... "mt -f /dev/st0 rewind" or "erase" throw no errors... root@stor001:/# mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x42 (LTO-2). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN root@stor001:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KS02 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: Ultrium 2-SCSI Rev: S65D Type: Sequential-Access ANSI SCSI revision: 03 "tell" does however root@stor001:/# mt -f /dev/st0 tell /dev/st0: Input/output error Based on a forum post I found, I tried: root@stor001:/# dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 10+0 records in 10+0 records out 10240 bytes (10 kB) copied, 5.0815 s, 2.0 kB/s which gave the person on the forum an error but seems to work for me. If anyone has any suggestions, I'm all ears...

  Read the article

• Different routing rules for a particular user using firewall mark and ip rule

  - by Paul Crowley

  Running Ubuntu 12.10 on amd64. I'm trying to set up different routing rules for a particular user. I understand that the right way to do this is to create a firewall rule that marks the packets for that user, and add a routing rule for that mark. Just to get testing going, I've added a rule that discards all packets as unreachable: # ip rule 0: from all lookup local 32765: from all fwmark 0x1 unreachable 32766: from all lookup main 32767: from all lookup default With this rule in place and all firewall chains in all tables empty and policy ACCEPT, I can still ping remote hosts just fine as any user. If I then add a rule to mark all packets and try to ping Google, it fails as expected # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 # ping www.google.com ping: unknown host www.google.com If I restrict this rule to the VPN user, it seems to have no effect. # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 -m owner --uid-owner vpn # sudo -u vpn ping www.google.com PING www.google.com (173.194.78.103) 56(84) bytes of data. 64 bytes from wg-in-f103.1e100.net (173.194.78.103): icmp_req=1 ttl=50 time=36.6 ms But it appears that the mark is being set, because if I add a rule to drop these packets in the firewall, it works: # iptables -t mangle -A OUTPUT -j DROP -m mark --mark 0x01 # sudo -u vpn ping www.google.com ping: unknown host www.google.com What am I missing? Thanks!

  Read the article

• Can't get SSH public key authentication to work

  - by Trey Parkman

  My server is running CentOS 5.3. I'm on a Mac running Leopard. I don't know which is responsible for this: I can log on to my server just fine via password authentication. I've gone through all of the steps for setting up PKA (as described at http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-ssh-beyondshell.html), but when I use SSH, it refuses to even attempt publickey verification. Using the command ssh -vvv user@host (where -vvv cranks up verbosity to the maximum level) I get the following relevant output: debug2: key: /Users/me/.ssh/id_dsa (0x123456) debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug3: start over, passed a different list publickey,gssapi-with-mic,password debug3: preferred keyboard-interactive,password debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password followed by a prompt for my password. If I try to force the issue with ssh -vvv -o PreferredAuthentications=publickey user@host I get debug2: key: /Users/me/.ssh/id_dsa (0x123456) debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug3: start over, passed a different list publickey,gssapi-with-mic,password debug3: preferred publickey debug3: authmethod_lookup publickey debug3: No more authentication methods to try. So, even though the server says it accepts the publickey authentication method, and my SSH client insists on it, I'm rebutted. (Note the conspicuous absence of an "Offering public key:" line above.) Any suggestions?

  Read the article

• Unable to add datasource in ColdFusion 9 and SQL Server 2008 R2

  - by Evik James

  I just installed SQL Server 2008 R2 and ColdFusion 9.0.1 on my Windows 7 machine for development use only. I have ColdFusion running well and serving pages (that aren't connected to a database). I can view my databases in SQL Server Management Studio. I successfully restored a few small databases and now I am trying to set up datasources for them through the ColdFusion Administrator. On my other machine, this was super easy. Not so much this time. The database I just added is named "Test". I am getting this error: Connection verification failed for data source: Test java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect It looks like the connection between ColdFusion and SQL Server is being refused. I know, brilliant observation, right? On my other machine, I was able to create datasources with just the default settings, no server name, username, or password. Any clue as to what might be the cause and how I might fix it?

  Read the article

• How to specify search domain name of nginx resolver for proxy_pass

  - by myjpa

  Assuming my server is www.mydomain.com, on Nginx 1.0.6 I'm trying to proxy all request to http://www.mydomain.com/fetch to other hosts, the destination URL is specified as a GET parameter named "url". For instance, when user requests either one: http://www.mydomain.com/fetch?url=http://another-server.mydomain.com/foo/bar http://www.mydomain.com/fetch?url=http://another-server/foo/bar it should be proxyed to http://another-server.mydomain.com/foo/bar I'm using the following nginx config and it works fine only if the url paramter contains domain name, like http://another-server.mydomain.com/...; but fails on http://another-server/... on error: another-server could not be resolved (3: Host not found) nginx.conf is: http { ... # the DNS server resolver 171.10.129.16; server { listen 80; server_name localhost; root /path/to/site/root; location = /fetch { proxy_pass $arg_url; } } Here, I'd like to resolve all URL without domain name as host name in mydomain.com, in /etc/resolv.conf, it's possible to specify default search domain name for the whole Linux system, but it doesn't affect nginx resolver: search mydomain.com Is it possible in Nginx? Or alternatively, how to "rewrite" the url parameter so that I can add the domain name?

  Read the article

• Domain with www pointing yo another site

  - by ntechi

  Recently I started Multi Sites on my VPS which is having Centos 64 bit. Currently I am having two sites live and each is working fine, Now the problem is in the URL I have the following sites: http://mbas.co.in http://u-k.in mbas was the very first site on my VPS Now in URL if I type http://mbas.co.in or http://www.mbas.co.in both redirect to my mbas website But for the second website, If in URL I type http://u-k.in then it redirects to the u-k website correctly but if I type http://www.u-k.in then it redirects me to mbas website. You can try that I have configured my DNS in this way, see the image http://i55.tinypic.com/14vlpxl.jpg And my Multi Site code is this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.mbas.co.in ServerName mbas.co.in ErrorLog logs/mbas.co.in-error_log CustomLog logs/mbas.co.in-access_log common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/u-k.in ServerName u-k.in ErrorLog logs/u-k-error_log CustomLog logs/u-k-access_log common </VirtualHost>

  Read the article

• SSH garbling characters in vim/nano on remote server

  - by geerlingguy

  ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

  Read the article

• remote telnet and email

  - by Mustafa Ismail Mustafa

  This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

  Read the article

• Freeradius authentication failed for unknown reason

  - by Moein7tl

  I followed this instruction to force freeradius to use mysql database. and run freeradius in debug mod. but it rejects all authentication. mysql database : mysql select * from radcheck; +----+----------+-----------+----+---------+ | id | username | attribute | op | value | +----+----------+-----------+----+---------+ | 1 | test | Password | == | test123 | | 2 | test | Auth-Type | == | Local | +----+----------+-----------+----+---------+ 2 rows in set (0.02 sec) radtest command : # radtest test test123 localhost 0 testing123 Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=235, length=20 radiusd debug mod log: rad_recv: Access-Request packet from host 127.0.0.1 port 51034, id=235, length=74 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0xbf111cbbae24fb0f0a558bfa26f53476 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 20 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 20 Sending Access-Reject of id 235 to 127.0.0.1 port 51034 Waking up in 4.9 seconds. Cleaning up request 20 ID 235 with timestamp +4325 Ready to process requests. where is the problem and how should I solve it?

  Read the article

• Whats the difference between local and remote addresses in 2008 firewall address

  - by Ian

  In the firewall advanced security manager/Inbound rules/rule property/scope tab you have two sections to specify local ip addresses and remote ip addresses. What makes an address qualify as a local or remote address and what difference does it make? This question is pretty obvious with a normal setup, but now that I'm setting up a remote virtualized server I'm not quite sure. What I've got is a physical host with two interfaces. The physical host uses interface 1 with a public IP. The virtualized machine is connected interface 2 with a public ip. I have a virtual subnet between the two - 192.168.123.0 When editing the firewall rule, if I place 192.168.123.0/24 in the local ip address area or remote ip address area what does windows do differently? Does it do anything differently? The reason I ask this is that I'm having problems getting the domain communication working between the two with the firewall active. I have plenty of experience with firewalls so I know what I want to do, but the logic of what is going on here escapes me and these rules are tedious to have to edit one by one. Ian

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• Cannot push to GitHub from Amazon EC2 Linux instance

  - by Eli

  Having the worst luck push files to a repo from EC2 to GitHub. I have my ssh key setup and added to Github. Here are the results of ssh -v [email protected] OpenSSH_5.3p1, OpenSSL 1.0.0g-fips 18 Jan 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to github.com [207.97.227.239] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5github2 debug1: match: OpenSSH_5.1p1 Debian-5github2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'github.com' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Offering public key: /root/.ssh/id_rsa debug1: Remote: Forced command: gerve eliperelman 81:5f:8a:b2:42:6d:4e:8c:2d:ba:9a:8a:2b:9e:1a:90 debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Pty allocation disabled. debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey).

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >