Search Results

Search found 5385 results on 216 pages for 'wordpress newbie'.

Page 182/216 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

  • Cannot boot into system after deleting partition

    - by Clayton
    Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

    Read the article

  • Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

    - by arlendo
    Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

    Read the article

  • Getting Started with Kinect for Windows.

    - by Vishal
    Hello folks,      Recently I got involved in a project for building a demo application for one of our customers with Kinect for Windows. Yes, something similar what Tom Cruise did in the movie Minority Report. Waving arms, moving stuff around, swipes, speech recognition, manipulating computer screens without even touching it. Pretty cool!!! The idea in the movie showed us how technology would be after 50 years from that day.   Minority Report Movie clip.           Well, that 50 years of time frame got squeezed and recently on Feb 1st 2012, Microsoft released the official Kinect for Windows SDK. That’s just 10 years from the movie release. Although, the product is in it early stages but with developer creativity and continuously improving hardware, those features shown in the movie are not very far away from becoming a reality. Soon after releasing the SDK, Microsoft again announced in March the release of its new Kinect for Windows SDK version 1.5 which is coming out in sometime May. More history about Kinect. Anyways, so for a newbie with Kinect, where would you start. Here is what I would suggest you can do. Watch the Kinect for Windows Quick start Series by Den Fernandez. Download the Kinect for Windows SDK and start playing around with the demos in it. It also comes with some basic Kinect documentation. Coding4Fun Kinect Projects | Lot many more videos and open sources projects information. Kinect for Windows Session at Techdays NL demo by Jesus Rodriguez. Book: Beginning Kinect Programming with the Microsoft Kinect SDK.  | I did go through few of the chapters in this book and based on that, it does talk deeply about core Kinect concepts but in very easy to understand way. I would definitely suggest this book for any Kinect developers. I liked the way it explained the Gestures recognition in Chapter 6. Buy your Kinect device from either Amazon or NewEgg. You will get it cheaper then buying it from Microsoft Store. Personally, I love Newegg.com as I never had any order related or shipping issues with them. I always hate developing UI application but well, you would need to get your hands dirty with WPF too in order to work with Kinect. So get started with WPF concepts too. I will keep adding stuff to the list once I come across them but so far the above list would definitely get you started building your first Kinect apps. Till then Happy Kinecting…!!!!! Thanks, Vishal Mody

    Read the article

  • How do I import my first sprites?

    - by steven_desu
    Continuing from this question (new question - now unrelated) So I have a thorough background in programming already (algorithms, math, logic, graphing problems, etc.) however I've never attempted to code a game before. In fact, I've never had anything more than minimal input from a user during the execution of a program. Generally input was given from a file or passed through console, all necessary functions were performed, then the program terminated with an output. I decided to try and get in on the world of game development. From several posts I've seen around gamedev.stackexchange.com XNA seems to be a favorite, and it was recommended to me when I asked where to start. I've downloaded and installed Visual Studio 2010 along with the XNA Framework and now I can't seem to get moving in the right direction. I started out looking on Google for "xna game studio tutorial", "xna game development beginners", "my first xna game", etc. I found lots of crap. The official "Introduction to Game Studio 4.0" gave me this (plus my own train of thought happily pasted on top thanks to MSPaint): http://tinypic.com/r/2w1sgvq/7 The "Get Additional Help" link (my best guess, since there was no "Continue" or "Next" link) lead me to this page: http://tinypic.com/r/2qa0dgx/7 I tried every page. The forum was the only thing that seemed helpful, however searching for "beginner", "newbie", "getting started", "first project", and similar on the forums turned up many threads with specific questions that are a bit above my level ("beginner to collision detection", for instance) Disappointed I returned to the XNA Game Studio home page. Surely their own website would have some introduction, tutorial, or at least a useful link to a community. EVERYTHING on their website was about coding Windows Phone 7.... Everything. http://tinypic.com/r/10eit8i/7 http://tinypic.com/r/120m9gl/7 Giving up on any official documentation after a while, I went back to Google. I managed to locate www.xnadevelopment.com. The website is built around XNA Game Studio 3.0, but how different can 3.0 be from 4.0?.... Apparently different enough. http://tinypic.com/r/5d8mk9/7 http://tinypic.com/r/25hflli/7 Figuring that this was the correct folder, I right-clicked.... http://tinypic.com/r/24o94yu/7 Hmm... maybe by "Add Content Reference" they mean "Add a reference to an existing file (content)"? Let's try it (after all- it's my only option) http://tinypic.com/r/2417eqt/7 At this point I gave up. I'm back. My original goal in my last question was to create a keyboard-navigable 3D world (no physics necessary, no logic or real game necessary). After my recent failures my goal has been revised. I want to display an image on the screen. Hopefully in time I'll be able to move it with the keyboard.

    Read the article

  • Make Browsing Safer for Children in Google Chrome

    - by Asian Angel
    If you are worried about the websites that your children could accidentally visit while browsing, then you may want to have a look at the Kid Safe – LinkExtend extension for Google Chrome. Kid Safe – LinkExtend in Action Before going any further you may want to have a quick look at the options. Everything is enabled by default but it is recommended that you disable the “Allow entering unsafe sites Option”. For our first example we visited “chatroulette.com”. As you can see in the screenshot WOT and McAfee SiteAdvisor gave the website a “green rating” but when it came specifically to its’ level of appropriateness for children LinkExtend gave it a “yellow rating”. Our second example was “hotbabes.com”…obviously not a good website for any child to visit. You can see that the entire window area has been totally “blacked out” and the available information for this site from each of the six ratings sources. The “Toolbar Button” is also displaying a “red rating”… Notice the two links at the bottom of the ratings screen…both will be visible if the “Allow entering unsafe sites Option” is not disabled (see Options above). You can see the difference for the links at the bottom of the ratings screen if you have the “Allow entering unsafe sites Option” disabled. Definitely much much better… Clicking on the “Find Kids Sites Link” will navigate the tab to the Yahoo! Kids website. The extension will also place “ratings buttons” beside search results at Google. As you can see in the screenshot below not all of the results had information available for them at this time. But it is certainly a lot better than nothing at all when it comes to keeping your children safe. A close-up look at the ratings for one of the search results. Conclusion While no browser add-in makes for a perfect solution the Kid Safe – LinkExtend extension will definitely be a helpful addition to your family’s Chrome browser. Links Download the Kid Safe – LinkExtend extension (Google Chrome Extensions) Similar Articles Productive Geek Tips How to Make Google Chrome Your Default BrowserAccess Browsing History in Google Chrome the Easy WayFocused New Tabs Quick-Fix for Google ChromeVisually Browse Through Your Open Tabs in Google ChromeSubscribe to RSS Feeds in Chrome with a Single Click TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Are You an IT Geek? Why Not Write for How-To Geek?

    - by The Geek
    Are you a geek in the IT field that wants to share your skills with the world? We’re looking for an experienced Sysadmin / IT Admin / Webmaster geek with writing skills that wants to join our team on a part-time basis. Please apply if you have the following qualities: You must be a geek at heart, willing to try and make the boring world of IT sound glamorous and sexy. If that’s not possible, at least be willing to share your wisdom and skills to help other IT geeks save time and become better at what they do. You must be able to write articles that are easy to understand. Either Windows or Linux writers are welcome to apply. You must be able to follow our style guide. You must be creative. You must generate ideas for articles on your own, and take suggestions like a pro. You’re ambitious, looking to build your skills and your name, and are prepared to work hard. If you aren’t willing to work hard, put some dedication and pride into your work, or aren’t really interested in the topic, this job might not be for you. We’re looking for serious individuals that want to grow with us, and as we grow, you’ll grow as well. How To Apply If you think this job is a good fit for you, send an email to [email protected] and include some background information about yourself, why you’d be a good fit, some topic areas you are familiar with, and hopefully some examples of your work. Bonus points if you have a ninja costume and a keyboard strapped to your back. Similar Articles Productive Geek Tips What Topics Should The How-To Geek Write About?Got Awesome Skills? Why Not Write for How-To Geek?Got Awesome Geek Skills? The How-To Geek is Looking for WritersAbout the GeekThe How-To Geek Bounty Program TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job?

    Read the article

  • Designing a completely new database/gui solution for my compnay

    - by user1277304
    I'm no expert when it come to everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my company that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio button control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionally done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that running, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our business is growing and our current ancient solution just can't keep up, and I'd hate to see our business go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endeavor, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole.

    Read the article

  • *Un*installing with Ubuntu Software Center (Centre) doesn't work on 64-bit 12.04.1

    - by likethesky
    Not sure if I'm doing something wrong, or if the .deb package I'm installing is broken in some way (I've built it, using NetBeans 7.2), or if indeed this is a bug in Software Center. When I install this particular 32-bit .deb on Ubuntu 10.04 LTS--all updates applied--(where it was built), GDebi shows it and has an 'Uninstall' button next to it. So it works fine to uninstall it there, via the GDebi GUI. However, when I install it on 12.04.1 LTS--all updates applied--it installs fine, but then does not show up in Ubuntu Software Center as available to be uninstalled. No combination of searching finds it. However, I can from the command line, do sudo apt-get purge javafxapplication1 and it finds it and deletes it. The same thing happens when I build a 64-bit .deb and attempt to install it to the same (64-bit AMD) or a different 64-bit Ubuntu 12.04.1 system. So it seems to be isolated to this NetBeans-generated .deb and the 64-bit AMD build (though I haven't tried it on a 32-bit 12.04.1 install yet). These are all on VirtualBox VMs, btw, if that matters. Any way to 'clean up' my Software Center and see if it's something I've done to get it in this state? Could this behavior be due to how this particular .deb has been built? (It doesn't have an 'Installed-Size' control field, so I do get the "Package is of bad quality" warning when I install it--which I do by clicking 'Ignore and install' button.) If you want all the gory details about why this happening--a bug has been reported against NetBeans for this behavior here: http://javafx-jira.kenai.com/browse/RT-25486 (EDIT: Just to be clear, the app installs fine, runs fine, all works as intended--I just can't get that 'bad package' message to go away, and now... I also can't uninstall it via Software Center, but rather, need to use sudo apt-get purge to uninstall it, after it installs. /END EDIT) Thanks for any pointers. I'm happy to report this as a bug against Ubuntu Software Center/Centre too, if that's what it seems to be, just tell me where to do so (a link). I'm a relative Ubuntu, NetBeans, and JavaFX newbie, though a long-time programmer. If I report it as a bug, I'll try it on the 32-bit build of 12.04.1 as well. Also, if I should add any more detail to the bug reported against NetBeans above, let me know--or feel free to add it yourself to the bug report above, if you would like. Thanks again!

    Read the article

  • NVIDIA 550M Drivers

    - by DOOM
    First to say, I am newbie, to the linux world and in situation where i have to get used to using ubuntu. My system is: i7-2630QM 8GB Ram with 750GB HD + NVIDIa 550M (1GB) Since i was facing problems with wubi - "slow Ubuntu", i installed it on a separate partition, of 80GB (10GB Swap, 40GB HOME, 30GB ROOT). The system was running fine, before I started using some "CFD" (Graphics Dependent) application. I needed to use "paraview" a graphics software, to design some engineering stuff. Following the installation problems, i installed something called "messa" on my system. The software works but, now my system is "dead-slow". Even with the computer at an idle state, the laptop, is pretty slow, and with huge annoying fan noise. I was tried running some similar applications with windows, and it turns out that its not a hardware, but has to do with the GPU drivers. Following some forums, I installed the "nvidia-current" and now everything is the same. I know, there are many solutions on this forum for nvidia-driver updates, but as you see, nothings working my way. Please someone, tell me what is that I am doing wrong :( This is the output from my terminal for the command lspci | grep 'intel' 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)

    Read the article

  • Best Language for the job? Database | C++, .NET, Java

    - by Randy E
    Ok, quick overview. I'm pretty brand new to software design. I have experience reading and editing/customizing PHP things for online scripts/software; Such as CMS, Wordpress, some forum solutions. I'm about to begin my degree in Software Design, the school I'm going to will allow us to kind of focus on an area, C++, Java, or .NET. I've played around a little with VB over the past week, mostly just trying to get a slight feel for it, however nothing extensive. I've been through Herbert Schildt's "C++, A Beginner's Guide." but I was mainly reading it, not doing anything with it beyond a couple basic Console Apps (and getting frustrated with auto-close :/ ). Now, where I decide to focus more in with my degree will depend on what the best language for the job is for my first piece of software I want to develop on my own. Assume I haven't looked at any of the languages at all, please help with the following: My first piece of software will be a database program. Everything has to do with users inputting and retrieving data, and calling that data to help with another function of the software, automatically calculating billing information based on information inputted in the other portion of the program. I won't go into too many details as I'm targeting a niche that doesn't have too much competition, but the competition that is there is established. I want to offer more features, scalable solutions, and the ability to port it to an online version. Ok, basically, it is a complete case management with integrated billing for Private Investigators. I would like the case management to be able to check the Database to see if certain information has been inputted before (such as Names/SSN's), and then the billing will pull hours inputted in the case portion for investigative work, multiplying by an already inputted amount for the fee, and then calculate sales tax. I also want to provide potential clients with an easily scalable solution, that is, a basic option for start ups that costs the least amount, with no additional users, ran on one machine. A middle option with the ability to create users and place them in two groups (User or Admin), as well as adding a few additional features, ran on one machine, but this will allow it to be accessed after being mapped on a network drive. And a third option to allow the placement into 4 different groups (Investigators, Billing, Managers, Admins) and more features. And then, a couple of years after launch, a 4th option that is browser based allowing the same 4 groups to login, as well as clients (view things concerning their case, with some admin customizable objects that can be added for clients view), over the internet. The only licensing security I would like to employ right off the bat will be serial key generated after ordering online (received in an email after the successful purchase). The program will access a database stored on a server periodically to verify license. I would like it to be able to check to make sure it's the most updated version and automatically update if not.

    Read the article

  • Ubuntu 12.04.3 Graphics Issues: Broken Pipes, Reinstalled Xorg and Bumblebee

    - by user190488
    It seems I have a problem, and am only making it worse by following what I find online. I have a new Asus N550JV-D71 (not sure about the part after the dash, though I definitely know it includes 71). I decided to downgrade Windows 8 to 7, then dual boot Ubuntu 12.04 with it (there were issues with Windows 8, and I had a Windows 7 disk handy). It did work and, after installing Bumblebee in tty (because it wouldn't boot when it was first installed), it worked marvelously for a little less than a week. However, I restarted it last night and got the Could not write bytes: Broken pipes error. (I see it's a very common error, but I've looked at the majority of the suggested Similar Questions already.) I followed what I could find online, followed those instructions (making sure to not install any sort of graphics drivers other than what Bumblebee provides), and it just seems to go further and further downhill. I'm afraid I didn't write the exact steps to get to this point (it was late by the time I gave up the night before), but it involved reinstalling lightdm, xorg (and xserver?), and Bumblebee. I then changed the Bumblebee.conf file so that Device=nvidia. I'm pretty new to Linux in general (I've used it since 10.04, but I hadn't had issues up until this computer, so it let me stay a newbie), so I'm not exactly sure what log files to look at to find the errors to look up. However, I did look at lshw and noticed that displays was marked as unassigned. Also, if I try to start lightdm using the command line, it always stops at Stopping Mount network filesystems. I should note that there isn't an xorg.conf file, and no .Xauthority. I would really, really prefer not to reinstall 12.04 if possible. I managed to get grub to display only a short time ago, and I can't boot to the dvd drive unless I go into the BIOS settings and manually change the boot order (that was an issue from the beginning, before the Ubuntu install), and getting into those settings often means rebooting several times due to the fact that the window to get to it is extremely small. I have most of what I need backed up, however, in case it does get to that point. If I really have to, I can just use the latest Ubuntu version instead of the LTS, but the reason I chose 12.04 in the first place is because I need something stable-ish, and Windows isn't suitable to what I need to do. I should note that the reason I restarted last night in the first place was that it wasn't charging the battery, and the wifi kept on going out. Hardware: Nvidia GeForce GT 750M Intel HD graphics 4600

    Read the article

  • Learn programming backwards, or "so I failed the FizzBuzz test. Now what?"

    - by moraleida
    A Little Background I'm 28 today, and I've never had any formal training in software development, but I do have two higher education degrees equivalent to a B.A in Public Relations and an Executive MBA focused on Project Management. I've worked on those fields for about 6 years total an then, 2,5 years ago I quit/lost my job and decided to shift directions. After a month thinking things through I decided to start freelancing developing small websites in WordPress. I self-learned my way into it and today I can say I run a humble but successful career developing themes and plugins from scratch for my clients - mostly agencies outsourcing some of their dev work for medium/large websites. But sometimes I just feel that not having studied enough math, or not having a formal understanding of things really holds me behind when I have to compete or work with more experienced developers. I'm constantly looking for ways to learn more but I seem to lack the basics. Unfortunately, spending 4 more years in Computer Science is not an option right now, so I'm trying to learn all I can from books and online resources. This method is never going to have NASA employ me but I really don't care right now. My goal is to first pass the bar and to be able to call myself a real programmer. I'm currently spending my spare time studying Java For Programmers (to get a hold on a language everyone says is difficult/demanding), reading excerpts of Code Complete (to get hold of best practices) and also Code: The Hidden Language of Computer Hardware and Software (to grasp the inner workings of computers). TL;DR So, my current situation is this: I'm basically capable of writing any complete system in PHP (with the help of Google and a few books), integrating Ajax, SQL and whatnot, and maybe a little slower than an experienced dev would expect due to all the research involved. But I was stranded yesterday trying to figure out (not Google) a solution for the FizzBuzz test because I didn't have the if($n1 % $n2 == 0) method modulus operator memorized. What would you suggest as a good way to solve this dilemma? What subjects/books should I study that would get me solving problems faster and maybe more "in a programmers way"? EDIT - Seems that there was some confusion about what did I not know to solve FizzBuzz. Maybe I didn't express myself right: I knew the steps needed to solve the problem. What I didn't memorize was the modulus operator. The problem was in transposing basic math to the program, not in knowing basic math. I took the test for fun, after reading about it on Coding Horror. I just decided it was a good base-comparison line between me and formally-trained devs. I just used this as an example of how not having dealt with math in a computer environment before makes me lose time looking up basic things like modulus operators to be able to solve simple problems.

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-05

    - by Bob Rhubart
    Why is enterprise software often so complicated? | Rajesh Raheja rraheja.wordpress.com Rajesh Raheja shares "a few examples of requirements that lead to creation of complex platform infrastructures that up the complex enterprise software." Educause Top-Ten IT Issues - the most change in a decade or more | Cole Clark blogs.oracle.com Cole Clark discusses why "higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia." Oracle VM RAC template - what it took | Wim Coekaerts blogs.oracle.com Wim Coekaerts shares an example that shows how easy it is to deploy a complete Oracle RAC cluster with Oracle VM. Oracle Cloud and Oracle Platinum Services Announcements oracle.com Featuring Larry Ellison and Mark Hurd. Wednesday, June 06, 2012. 1:00 p.m. PT – 2:30 p.m. PT Creating an Oracle Endeca Information Discovery 2.3 Application Part 1 : Scoping and Design | Mark Rittman www.rittmanmead.com Oracle ACE Director Mark Rittman launches a new series that dives into "the various stages in building a simple Oracle Endeca Information Discovery application, using the recent Endeca Information Discovery 2.3 release." Introducing Decision Tables in the SOA Suite 11g | Lucas Jellama technology.amis.nl Oracle ACE Director Lucas Jellema demonstrates how "the decision table can be put to good use to implement the business logic behind the classical game of Rock, Paper and Scissors." Application integration: reorganise, recycle, repurpose | Andrew Clarke radiofreetooting.blogspot.com "Integration is a topic which is in everybody's baliwick," says Oracle ACE Andrew Clarke. "The business people want to get the best value from their existing IT investments. The architects need to understand the interfaces between the silos and across the layers. The developers have to implement it." Using XA Transactions in Coherence-based Applications | Jonathan Purdy blogs.oracle.com Purdy shares "a few common approaches when integrating Coherence into applications via the use of an application server's transaction manager." Thought for the Day "The difficulty lies, not in the new ideas, but in escaping from the old ones..." — John Maynard Keynes (June 5, 1883 - April 4, 1946) Source: Quotations Page

    Read the article

  • Designing a completly new database/gui solution for my compnay

    - by user1277304
    I'm no expert when it come to Everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my compnay that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio buttton control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionaly done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that runnning, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our buisness is growing and our current ancient solution just can't keep up, and I'd hate to see our buisness go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endevour, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole. Thank you guys for your time.

    Read the article

  • jQuery open and close nested ul nav depending on location

    - by firefusion
    I'm making a sub nav in wordpress and have a nested list style menu. An example of the HTML is below. Whichever is the current item has the li class "current_page_item". I need all child menus collapsed unless there is a current_page_item class on the parent or one of the children. <ul> <li class="current_page_item"><a href="#">Parent Item</a> <ul class="children"> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> </ul> </li> <li><a href="#">Parent Item</a> <ul class="children"> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> </ul> </li> <li><a href="#">Parent Item</a> <ul class="children"> <li><a href="#">Child page</a></li> <li><a href="#">Child page</a></li> </ul> </li> <li><a href="#">Parent Item</a></li> <li><a href="#">Parent Item</a></li> </ul> This so far, which works but i wonder if it can be improved as there is some flashing open and then closed again.... jQuery('ul.children').slideUp(); jQuery('li.current_page_item ul.children').slideDown('medium'); jQuery('li.current_page_item').parent().slideDown('medium');

    Read the article

  • Small hiccup with VMware Player after upgrading to Ubuntu 12.04

    The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

    Read the article

  • Analysing SQLBits Feedback

    - by jamiet
    Earlier this week I received all the feedback that people offered on my session at SQLBits 7 in York – “SSIS Dataflow Performance Tuning” (the video is available online if you wish to see it). As you may have gathered from previous posts on this blog and my less-SQLy-focused Wordpress blog I am a big fan of collecting and tracking both personal and public data and session feedback lends itself very well to tracking because it is quantitative rather than qualitative; by that I mean attendees are invited to provide marks out of ten rather than (or, in the case of SQLBits, as well as) written comments. The SQLBits feedback is also useful because they use a consistent format – the same questions are asked each time – this means it is particularly easy to to track whether the scores that people give are trending up or down. I suspect that somewhere the SQLBits organisers have a big Analysis Services cube (ok, perhaps its an Excel pivot table) that allows them to analyse these scores per conference, speaker, track etc.… and there’s no reason that we as session speakers cannot do the same thing. To that end I have started to store my feedback in an Excel spreadsheet of my own which in the interests of transparency is available for public viewing (only a web browser required) on SkyDrive at http://cid-550f681dad532637.office.live.com/view.aspx/Public/Misc/Personal%20SQLBits%20Session%20Feedback.xlsx. I have used a pivot table to aggregate all that feedback and here is a screenshot: I am hereby making a public plea to the SQLBits organisers (on the off-chance that they are reading) to please continue to keep the feedback format consistent in the future and I encourage them to publish all of the feedback in an anonymised form. I would also encourage anyone doing conference speaking to track their conference feedback in the same way that I am doing so that you get an insight into whether or not you are improving over time. It is not difficult to setup and maintaining it as you do more sessions takes very little effort. Storing feedback data like this leads me to wider thoughts about well-known conventions and data format standardisation. Let’s imagine a utopia where there were a standard set of questions for capturing session feedback that were leveraged at every conference regardless of subject matter, location or culture; that would give rise to immense cross-conference and cross-discipline analysis – the data analyst in me goes giddy at the thought of it. It is scenarios like this that drive my interest both in data formats such as iCalendar, microformats and RDF, and in emerging movements such as the semantic web and linked data, all things which I have written about in the past. I don’t know whether we will ever reach the stage where every piece of data has structured, descriptive metadata associated with it but I live in hope. @Jamiet

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by Torben Gundtofte-Bruun
    My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

    Read the article

  • Looking for recommendations for a server-side newsletter program

    - by Sparky672
    Hello- I'm currently using a server-side SQL based mailing list program called Php-List on multiple sites and it works fairly well. But installation and setup is quite cumbersome, quirky and the interface is not well organized... neither is the code... with pieces all over the place in random fashion. Customizing the "look & feel" and full site integration are both tedious and painful. Upgrading the version is made more complex since multiple edits need to be manually transferred each time. Also, probably due to a poor English translation, descriptions and instructions within certain areas of the user interface are contradictory and unclear. You just have to play with it and remember what you did last time it worked. It's supposed to be so my customers can send out their own newsletters... after supplying a written tutorial, about half of them seem to stumble through it okay and the other half just hire me to do it for them. So not quite easy enough for most average people to use. I'm looking for something that's as easy for them as using a blog or discussion forum. It also must be easier to set up and integrate into a site than Php-List. I have no problem getting dirty and writing CSS or HTML by hand. Nor do I have any problem editing the program code. Perhaps what I'm looking for is a solution that is more organized, a better GUI, and template or "skin" based. Therefore, if I spend many hours customizing a skin, I can simply update the program and re-use my custom skin without having to reproduce the tedious setup over and over. (I currently maintain a list of about 25 things I must manually edit or add to multiple files in multiple directories each time I install or upgrade Php-List) A great example of what I'm looking for is very much like WordPress or phpBB. They're both easy to install and customize yet powerful and packed full of features. They're also VERY well organized making customization less painful. So enough yammering for now... anyone know of something, besides Php-List, with many of the same features as Php-List; maintaining a mailing list with a server-side database, custom sign-up pages, automatic opt-in opt-out, allowing custom HTML newsletter templates, etc? Thank-you!

    Read the article

  • core.* files eating up server space (~50MB)

    - by skytreader
    I'm renting server space from someone and, upon logging in my control panel after quite sometime, noticed an abnormal spike (~50MB) in the disk usage. Upon investigating, I found a lot of core.* files scattered around my public_html directory. Each one is more than 5MB in size but no more than 6MB. The * part is all numbers (in programming regex, that should be core\.\d+). I downloaded one and checked the contents. There was a lot of balderdash characters (NUL mostly, but also a scattering of ETB, ETX, STX) but there's this block of readable text which says: This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Pretty self-explanatory. A few blocks above the text are some more readable messages that look like logs but is sandwiched in between non printable characters. I've extracted some below. Scan not valid for mh mailboxes Bogus character 0x%x in news state Can't rewrite news state %.80s Error closing backup news state %.80s No state for newsgroup %.80s found Now, a few concerns: Am I under attack? The messages seem to be about my webmail but I don't use my personal webmail that much---only for a vanity email address and an inbox for an outdated comments system. However, lately, I seem to notice a spike in the spam for my vanity mail. (Note: the comments system is covered by a captcha but every now and then some get through. My vanity email has a spam filter but it isn't as good as I'd like). Next, if this is a feature, can I turn it off? Is it advisable to? I've only 150MB so you see why I'm fretting over a 50MB spike. Some final details: my only server-side scripts are in PHP. The directory which accumulated the most number of these core files is the one containing the Wordpress-managed subdomain of my site. I manage my server through CPanel. Lastly, I decided to delete this files and after some checking nothing seems amiss in my websites nor in my mail. They are indeed the ones responsible for the ~50MB spike as my disk space usage is back to expected.

    Read the article

  • Imperative vs. component based programming [closed]

    - by AlexW
    I've been thinking about how programming and more specifically the teaching of programming is advocated amongst the community (online). Often I've heard that Ruby and RoR is an ideal platform for learning to program. I completely disagree... RoR and Ruby are based on the application of the component based paradigm, which means they are ideal for rapid application development. This is much like the MVC model in PHP and ASP.NET But, learning a proper imperative language like Java or C/C++ (or even Perl and PHP) is the only way for a new programmer to explore logic itself, and not get too bogged down in architectural concerns like the need for separation of concerns, and the preference for components. Maybe it's a personal preference thing. I rather think that the most interesting aspects to programming are the procedural bits of code I write that actually do stuff rather than the project planning, and modelling that comes about from fully object oriented engineering or simply using the MVC model. I know this may sound confused to some of you. I feel strongly though that the best way for programming to be taught is through imperative and procedural methods. Architectural (component) methods come later, if at all. After all, none of the amazing algorithms that exist were based on OOP practice! It's all procedural code when it comes to the 'magic'. OOP is useful in creating products and utilities. Algorithms are what makes things happen, and move data around, and so imperative (and/or procedural) code are what matters most. When I see programmers recommending Ruby on Rails to newbie developers, I think it's just so wrong. Just because you write less code with Ruby does not make it easier to do! It's the opposite... you have to know loads more to appreciate its succinct nature. New coders who really want to understand the nuts and bolts of coding need to go away and figure out writing methods/functions (i.e. imperative programming) and working in procedural style, in order to grasp the fundamentals, first, before looking into architectural ways of working. So, my question is: should Ruby ever be recommended as a first language? I think no (obviously)... what arguments are there for it?

    Read the article

  • I have a performance problem

    - by Alan
    (copied from my wordpress blog). So start 95% of the performance calls that I receive. They usually continue something like: I have gathered some *stat data for you (eg the guds tool from Document 1285485.1), can you please root cause our problem? So, do you think you could? Neither can I, based on this my answer inevitably has to be "No". Given this kind of problem statement, I have no idea about the expectations, the boundary conditions, or even the application. The answer may as well be "Performance problems? Consult your local Doctor for Viagra". It's really not a lot to go on. So, What kind of problem description is going to allow me to start work on the issue that is being seen? I don't doubt that there really is an issue, it just needs to be pinned down somewhat. What behavior exactly are you expecting to see? Be specific and use business metrics. For example "run-time", "response-time" and "throughput". This helps us define exit criterea. Now, let's look at the system that is having problems. How is what you are seeing different? Use the same type of metrics. The answers to these two questions take us a long way towards being able to work a call. Even more helpful are answers to questions like Has this system ever worked to expectation? If so, when did it start exhibiting this behavior? Is the problem always present, or does it sometimes work to expectation? If it sometimes works to expectation, when are you seeing the problem? Is there any discernible pattern? Is the impact of the problem getting better, worse, or remaining constant? What kind of differences are there between when the system was performing to expectation and when it is not? Are there other machines where we could expect to see the same issue (eg similar usage and load), but are not? Again, differences? Once we start to gather information like this we start to build up a much clearer picture of exactly what we need to investigate, and what we need to achieve so that both you and me agree that the problem has been solved. Please help get that figure of poorly defined problem statements down from it's current 95% value.

    Read the article

  • Is it smart to take a year off from school to get experience?

    - by user134147
    firstly I apologize if this question is not appropriate for the site, but I've seen other similar (though slightly deviant) questions on this sight before and I know the people here are the most qualified to answer my question. Anyways, I'm currently between my sophomore and junior years at a 4 year university, and after a bit of deliberation I've decided on computer science as a major (BA, by the way, as a BS would require me to stay at least an extra year the way our program is set up). I've been interested now in programming for a few months and I've developed a passion for it in a very short time. I began learning C++, migrating to Java recently when I learned my school focuses on this language. Now, I should mention that the concept of higher education has never sat well with me, so part of my motivation for wanting to take time off is to truly challenge myself and see what I can accomplish when I actually try at something. The autodidact in me finds it difficult to focus on my passions while trying to keep a high GPA in unrelated classes. However, I understand the times we live in and therefore would plan to complete my degree after this year. So my question is whether or not the skills I learn in a year off from college could justify the time off from school. Unfortunately, I don't believe I know enough yet to gain any professional experience (internship, etc.) so I would mostly focus my time on learning Java and another language, possibly Wordpress (to gain an understanding of web programming concepts as I have not yet decided what field I want to get into, and to make some money to fund my off-year), and to delve into security concepts, which also interest me. I'm hoping I could work on projects, such as simple applications or contributions to open source software during this time to enhance my resume once I do finish school, so I can find a job out of college easier. I do not want to be the new hire who knows nothing beyond the concepts of his Java textbooks. Does anyone have any input about these thoughts of mine, or any ideas for where I should focus my studies or how high I might set the bar for my work? Thanks a lot everyone!

    Read the article

  • SQL Server express service is not starting

    - by Mahdi Ghiasi
    I've bought my first VPS yesterday, and I have installed Microsoft SQL Server 2012 Express on it. Then I have restarted my VPS. But SQL Server Service didn't start. I've tried to start it manually, but It can't start: What is the problem? How to solve it? P.S: This is my first server management, and I'm a newbie, if you need any further details about this, please leave a comment. I'll update the question. Update 1: This is some log details from Event viewer that I thought that they may be useful for this problem: FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.). The resource database build version is 11.00.3000. This is an informational message only. No user action is required. FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation. Starting up database 'model'. FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.). FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'. Diagnose and correct the operating system error, and retry the operation. I'm confused about these e:\s, my VPS has just one C:\ drive, So what is e:\ ?

    Read the article

  • Kernel panic while loading Mac OS X on VMWare

    - by Vladimir Gritsenko
    I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

    Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >