Search Results

Search found 11280 results on 452 pages for 'zend newbie dev'.

Page 182/452 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• How would I force Debian to use the physical sector size on a hard disk?

  - by Confused User

  I just purchased a few new 3TB WD drives. These have physical 4k sectors, but there is some sort of layer which is providing 512B logical sectors (see the partition table below). In order to attempt to get some more speed out of my hard drives, I would like to get rid of this logical layer and actually use the physical 4k sectors. However, I can't figure out how to do this (or even if it's possible) from the man pages of fdisk and parted, or from searching Google. Does anybody know how this could be done? As to why this is relevant, this page demonstrates that meerly aligning the sectors properly can already make up to a 25% speed difference for reads, and more than 2500% for writes in some cases! Getting rid of the logical sectors in favor of the physicals ones should improve speeds even more. Thanks! $ parted /dev/sdc GNU Parted 2.3 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD30EZRX-00M (scsi) Disk /dev/sdc: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 3001GB 3001GB zfs 9 3001GB 3001GB 8389kB P.S. I don't care about the data on the drives, I was just playing with different file systems. Also, this is my first time posting here, so please let me know if my posts should be formatted differently, etc.

  Read the article

• Using public interfaces on a server connected through a GRE tunnel

  - by Evan

  I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

  Read the article

• Mysql - innoDb - is in the future! Current system log sequence number

  - by Ward Loockx

  I have this error in my syslog. I restored an older dump to solve this problem, after some reading. Now The errors in syslog are far less than before. But still a few times an hour I get Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96637 log sequence number 7 1223357717 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96638 log sequence number 8 150027924 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96639 log sequence number 7 4208567151 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Anybody that knows how I can track what database is causing this issue? And how to fix?

  Read the article

• Weird mouse behaviour. Debian wheezy

  - by DevNoob

  When I move my mouse slowly over the desktop the pointer jumps often a few pixels (one or two) in the opposite direction of which I move my mouse. Horribly when trying to set the cursor around some semicolons in eclipse. I guess this is the result of a wrong set resolution of it. I suppose this is because the mouse was set initially really fast and even if I do xset 1/2 3, the mouse is just to fast and unprecise for me. It aready tried to configure the xorg.conf like this: Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "Auto" Option "Name" "Logitech G3" Option "Resolution" "2000" EndSection But with no effect. Maybe because there is no /dev/mouse. This ist the content of dev. Maybe you can tell me which one is the mouse. autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dvd dvdrw fd fd0 full fuse fw0 hidraw0 hidraw1 hpet input kmsg log loop0 loop1 loop2 loop3 loop4 loop5 loop6 loop7 loop-control MAKEDEV mapper mcelog mem net network_latency network_throughput null nvidia0 nvidiactl oldmem port ppp printer psaux ptmx pts random rfkill root rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sda8 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sndstat sr0 stderr stdin stdout tty tty0 tty1 tty10 tty11 tty12 tty13 tty14 tty15 tty16 tty17 tty18 tty19 tty2 tty20 tty21 tty22 tty23 tty24 tty25 tty26 tty27 tty28 tty29 tty3 tty30 tty31 tty32 tty33 tty34 tty35 tty36 tty37 tty38 tty39 tty4 tty40 tty41 tty42 tty43 tty44 tty45 tty46 tty47 tty48 tty49 tty5 tty50 tty51 tty52 tty53 tty54 tty55 tty56 tty57 tty58 tty59 tty6 tty60 tty61 tty62 tty63 tty7 tty8 tty9 ttyS0 ttyS1 ttyS2 ttyS3 uinput urandom usb vcs vcs1 vcs2 vcs3 vcs4 vcs5 vcs6 vcs7 vcsa vcsa1 vcsa2 vcsa3 vcsa4 vcsa5 vcsa6 vcsa7 vga_arbiter vmci vmmon vmnet0 vmnet1 vmnet8 vsock watchdog xconsole zero So my question is: How do I setup my mouse correctly in Debian wheezy?

  Read the article

• Why I cannot copy install.wim from Windows 7 ISO to USB (in linux env)

  - by fastreload

  I need to make a USB bootable disk of Windows 7 ISO. My USB is formatted to NTFS, ISO is not corrupt. I can copy install.wim elsewhere but I cannot copy it to USB. I even tried rsync. rsync error sources/install.wim rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: write failed on "/media/52E866F5450158A4/sources/install.wim": Input/output error (5) rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8] Stat for windows.vim File: `X15-65732 (2)/sources/install.wim' Size: 2188587580 Blocks: 4274600 IO Block: 4096 regular file Device: 801h/2049d Inode: 671984 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ umur) Gid: ( 1000/ umur) Access: 2011-10-17 22:59:54.754619736 +0300 Modify: 2009-07-14 12:26:40.000000000 +0300 Change: 2011-10-17 22:55:47.327358410 +0300 fdisk -l Disk /dev/sdd: 8103 MB, 8103395328 bytes 196 heads, 32 sectors/track, 2523 cylinders, total 15826944 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdd1 * 32 15826943 7913456 7 HPFS/NTFS/exFAT hdparm -I /dev/sdd: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ATA device, with non-removable media Model Number: UF?F?A????U]r???U u??tF?f?`~ Serial Number: ?@??~| Firmware Revision: ????V? Media Serial Num: $I?vnladip raititnot baelErrrol aoidgn Media Manufacturer: o eparitgns syetmiM Standards: Used: unknown (minor revision code 0x0c75) Supported: 12 8 6 Likely used: 12 Configuration: Logical max current cylinders 17218 0 heads 0 0 sectors/track 128 0 -- Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 0 MBytes device size with M = 1000*1000: 0 MBytes cache/buffer size = unknown Capabilities: IORDY(may be)(cannot be disabled) Queue depth: 11 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 0 Current = ? Recommended acoustic management value: 254, current value: 62 DMA: not supported PIO: unknown * reserved 69[0] * reserved 69[1] * reserved 69[3] * reserved 69[4] * reserved 69[7] Security: Master password revision code = 60253 not supported not enabled not locked not frozen not expired: security count not supported: enhanced erase 71112min for SECURITY ERASE UNIT. 172min for ENHANCED SECURITY ERASE UNIT. Integrity word not set (found 0xaa55, expected 0x80a5)

  Read the article

• Creating an ec2 image on amazon fails at mkfs.ext3

  - by Dave Orr

  I'm trying to create an image of my ec2 instance in Amazon's cloud. It's been a bit of an adventure so far. I did manage to install Amazon's ec2-api-tools, which was harder than it seemed like it should have been. Then I ran: ec2-bundle-vol -d /mnt -k pk-{key}.pem -c cert-{cert}.pem -u {uid} -s 1536 Which returned: Copying / into the image file /mnt/image... Excluding: /sys/kernel/debug /sys/kernel/security /sys /proc /dev/pts /dev /dev /media /mnt /proc /sys /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/z25_persistent-net.rules /mnt/image /mnt/img-mnt 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00677357 s, 155 MB/s mkfs.ext3: option requires an argument -- 'L' Usage: mkfs.ext3 [-c|-l filename] [-b block-size] [-f fragment-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G meta group size] [-N number-of-inodes] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-T fs-type] [-U UUID] [-jnqvFKSV] device [blocks-count] ERROR: execution failed: "mkfs.ext3 -F /mnt/image -U 1c001580-9118-4a50-9a25-dcf02be6d25f -L " So mkfs.ext3 wants -L, which is a volume name. But ec2-bundle-vol doesn't seem to take in a volume name as an argument, and the docs (http://docs.amazonwebservices.com/AmazonEC2/gsg/2006-06-26/creating-an-image.html) don't seem to think one should be needed. Certainly their sample command: # ec2-bundle-vol -d /mnt -k ~root/pk-HKZYKTAIG2ECMXYIBH3HXV4ZBZQ55CLO.pem -u 495219933132 -s 1536 doesn't specify anything. So... any help? What am I missing?

  Read the article

• Compiling linux kernel, how much size is needed?

  - by ant2009

  Hello, I am have downloaded the newest most stable linux kernel 2.6.33.2 I thought I would test this using virtualbox. So I create a dynamically sized harddisk of 4gb. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4gb, but the actual size is 3.5gb $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a linux kernel? Is there any guidelines to follow when doing this? This is my first time, so just experimenting with this. Many thanks,

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• nginx config woes for multiple subdomains & domains

  - by Peter Hanneman

  I'm finally moving away from Apache and I've got the latest development version of nginx running on a fully updated Ubuntu 10.04 VPS. I've got a single dedicated IP for the box (1.2.3.4) but I've got two separate domains pointing to the server: www.example1.com and www.example2.net. I would like to map the fallowing relationships between urls and document roots in the config: www.example1.com / example1.com -> /var/www/pub/example1.com/ subdomain.example1.com -> /var/www/dev/subdomain/example1.com/ www.example2.net / example2.net -> /var/www/pub/example2.net/ subdomain.example2.net -> /var/www/dev/subdomain/example2.net/ Where the name of the requested subdomain is a folder under /var/www/dev/. Ideally a request for a non-existent subdomain(no matching folder found) would result in a rewrite to the public site (eg: invalid.example1.com -- www.example1.com) however a mere "404 Not Found" wouldn't be the worst thing in the world. It would also be nice if I didn't need to modify the config every time I mkdir a new subdomain folder - even better if I don't need to edit it for a new domain either...but now I'm getting greedy... :p Although in my defense Apache did all of this with a single directive. Does anyone know how I can efficiently mimic this behavior in nginx? Thanks in advance, Peter Hanneman

  Read the article

• Apache in OS X not displaying localhost nor vhosts correctly

  - by Marcus

  I've encountered a really odd problem in my development environment, and I really can't make any sense of it. It started by a locally developed PHP-site refused to update any content I edited in a file – no text or nothing. So if the document was: <h2>Hello!</h2> and I edited it to <h2>What's wrong?!</h2> it still outputed <h2>Hello!</h2>. I thought is was some kind of cache:ing problem, but no "hard reloads" in the browser nor sudo apachectl -k restart sorted it out. Only a restart of my Mac did finally fix it. Now, a few days later even stranger issues are appearing. I have a LAMP-stack installed via Homebrew, in httpd-vhosts.conf I've set ~/Dev/ as my localhost, and I set up a <VirtualHost *80> for each project ("ServerName projectname.dev" for example). However, what ever files of folder I put in ~/Dev/ have stopped showing up on localhost, and new VirtualHost-directives doesn't work. Three projects + "docs" in the folder: But "localhost" only displays the two older projects...? So, as I've said – I've tried restarting Apache (without errors), clearing browser caches (tried in three browsers, Chrome, Safari and Firefox) and ever rebooting the Mac. Nothing. Any ideas? Running OS X 10.8.5 and Apache 2.2.24.

  Read the article

• SQL cluster instance names for large project

  - by Sam

  We're setting up two clusters. One dev and one prod. The Production will host two SQL instances - a OLTP and a DW. The development will host 4 OLTP non-production environments and at least one DW non-production. We're working on getting more DW non-prods and possibly more OLTP systems. I'm considering a naming scheme like this, where PROJ would be 3 initials for the project name. Dev Cluster MSSQLPROJD1\D1 (DEV) MSSQLPROJD2\D2 (TEST) MSSQLPROJD3\D3 (QA) MSSQLPROJD4\D4 (STAGE) MSSQLPROJD5\D5 (DW) Prd Cluster MSSQLPROJP1\P1 (PRD) MSSQLPROJP2\P2 (DW) To the left of the slash, each name must be unique network wide. On each server, the instance name, to the right of the slash, must be unique. Any thoughts on this? I'm trying to avoid having instance names drifting from reality as the project progresses - say we change what we call a certain environment or want to repurpose one. Then we can update a listing of the purposes for the instances and be done with it. How has a scheme like this worked out for you? Maybe you do things another way in your shop - tell me about it. Thanks.

  Read the article

• if the file changes send email about diff

  - by user62367

  I have 2 script. Script "A", Script "B". Script A is regulary watching the dhcpacks [dhcp release is configured to 2mins] in the logs, for the past 2 minutes. It writes the MAC addresses to a file [/dev/shm/dhcpacks-in-last-2min.txt] every 2 minutes. Ok, this is working, active clients are in this file. Super! Script B: On pastebin I'm trying to create a script, that watches the changes in /dev/shm/dhcpacks-in-last-2min.txt file ( every 1 sec). Ok. But: my watcher script [the pastebined][1] is not working fine - sometime it works, sometime it sends that someoneXY logged out`, but it's not true! Nothing happened, and the problem is not in the Script A. Can someone help me point out, what am I missing? How can I watch a file (in every sec), that contains only MAC addresses, and if someone doesn't get dhcpack in 2 minutes, the file /dev/shm/dhcpacks-in-last-2min.txt changes, and that clients MAC address will be gone from it, and i need to know, who was it [pastebined my script - but somethings wrong with it]. Thank you for any help..I've been pathing my script for days now.. :\

  Read the article

• Understanding tcptraceroute versus http response

  - by kojiro

  I'm debugging a web server that has a very high wait time before responding. The server itself is quite fast and has no load, so I strongly suspect a network problem. Basically, I make a web request: wget -O/dev/null http://hostname/ --2013-10-18 11:03:08-- http://hostname/ Resolving hostname... 10.9.211.129 Connecting to hostname|10.9.211.129|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: ‘/dev/null’ 2013-10-18 11:04:11 (88.0 KB/s) - ‘/dev/null’ saved [13641] So you see it took about a minute to give me the page, but it does give it to me with a 200 response. So I try a tcptraceroute to see what's up: $ sudo tcptraceroute hostname 80 Password: Selected device en2, address 192.168.113.74, port 54699 for outgoing packets Tracing the path to hostname (10.9.211.129) on TCP port 80 (http), 30 hops max 1 192.168.113.1 0.842 ms 2.216 ms 2.130 ms 2 10.141.12.77 0.707 ms 0.767 ms 0.738 ms 3 10.141.12.33 1.227 ms 1.012 ms 1.120 ms 4 10.141.3.107 0.372 ms 0.305 ms 0.368 ms 5 12.112.4.41 6.688 ms 6.514 ms 6.467 ms 6 cr84.phlpa.ip.att.net (12.122.107.214) 19.892 ms 18.814 ms 15.804 ms 7 cr2.phlpa.ip.att.net (12.122.107.117) 17.554 ms 15.693 ms 16.122 ms 8 cr1.wswdc.ip.att.net (12.122.4.54) 15.838 ms 15.353 ms 15.511 ms 9 cr83.wswdc.ip.att.net (12.123.10.110) 17.451 ms 15.183 ms 16.198 ms 10 12.84.5.93 9.982 ms 9.817 ms 9.784 ms 11 12.84.5.94 14.587 ms 14.301 ms 14.238 ms 12 10.141.3.209 13.870 ms 13.845 ms 13.696 ms 13 * * * … 30 * * * I tried it again with 100 hops, just to be sure – the packets never get there. So how is it that the server does respond to requests via http, even after a minute? Shouldn't all requests just die? I'm not sure how to proceed debugging why this server is slow (as opposed to why it responds at all).

  Read the article

• Disable RAID to JBOD in server IBM x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• Recovering a mdadm+lvm+ext4 partition with read error

  - by bitwelder

  One of disks in my NAS has failed. The NAS is running Linux, and it uses mdadm + LVM technology for its filesystems. I do have backup for most of the contents, but not for the very last changes, and if possible, I'd like to recover that from this failing disk. The disk (a 'green drive' WD10EARS 1TB in size) throws this kind of errors: Oct 3 12:00:41 kernel: [ 3625.620000] ata5.00: read unc at 9453282 Oct 3 12:00:41 kernel: [ 3625.620000] lba 9453282 start 9453280 end 1953511007 Oct 3 12:00:41 kernel: [ 3625.620000] sde5 auto_remap 0 Oct 3 12:00:41 kernel: [ 3625.630000] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 Oct 3 12:00:41 kernel: [ 3625.630000] ata5.00: edma_err_cause=00000084 pp_flags=00000003, dev error, EDMA self-disable Oct 3 12:00:41 kernel: [ 3625.640000] ata5.00: failed command: READ FPDMA QUEUED Oct 3 12:00:41 kernel: [ 3625.650000] ata5.00: cmd 60/40:00:e0:3e:90/00:00:00:00:00/40 tag 0 ncq 32768 in Oct 3 12:00:41 kernel: [ 3625.650000] res 41/40:00:e2:3e:90/12:00:00:00:00/40 Emask 0x409 (media error) <F> Oct 3 12:00:41 kernel: [ 3625.660000] ata5.00: status: { DRDY ERR } However, while testing with 'dd', I noticed that if I skip the first 4kB, the read seems to be ok, i.e. a command like. dd if=/dev/sde5 of=dev/null bs=4k count=1000 skip=1 doesn't return any read error. Supposing that there is no other read failure in the rest of the disk, would I be able to recover this 900 GB partition (as I mentioned before, it's a 'linux raid autodetect' partition, that contains a a LVM2 volume that contains a ext4 filesystem) if I copy-clone the partition somewhere else, but the first 4kB?

  Read the article

• Route all wlan0 traffic over tun0

  - by Tuinslak

  I'm looking for a way to route all wlan0 traffic (tcp and udp) over tun0 (openvpn). However, all other traffic originating from the device itself should not be routed through tun0. I'm guessing this could be realized using iptables or route, but none of my options seem to work. # route add -net 0.0.0.0 gw 172.27.0.1 dev wlan0 SIOCADDRT: No such process Info: This is because the VPN server is not redundant, and wlan users are not really important. However, all services running on the device are fairly important and having a VPN virtual machine with no SLA on it is just a bad idea. Trying to minimize the odds of something going wrong. So setting the VPN server as default gateway is not really an option. I also want all wlan0 user to use the VPN server's IP address as external IP. Edit with the script provided: root@ft-genesi-xxx ~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.27.0.17 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.13.37.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 172.27.0.0 172.27.0.17 255.255.192.0 UG 0 0 0 tun0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 root@ft-genesi-xxx ~ # ./test.sh RTNETLINK answers: No such process root@ft-genesi-xxx ~ # cat test.sh #!/bin/sh IP=/sbin/ip # replace with the range of your wlan network, or use fwmark instead ${IP} rule add from 10.13.37.0/24 table from-wlan ${IP} route add default dev tun0 via 127.72.0.1 table from-wlan ${IP} route add 10.13.37.0/24 dev wlan0 table from-wlan

  Read the article

• Hard Disk Not Counting Reallocated Sectors

  - by MetaNova

  I have a drive that is reporting that the current pending sectors is "45". I have used badblocks to identify the sectors and I have been trying to write zeros to them with dd. From what I understand, when I attempt writing data directly to the bad sectors, it should trigger a reallocation, reducing current pending sectors by one and increasing the reallocated sector count. However, on this disk both Reallocated_Sector_Ct and Reallocated_Event_Count raw values are 0, and dd fails with I/O errors when I attempt to write zeros to the bad sectors. dd works fine, however, when I write to a good sector. # dd if=/dev/zero of=/dev/sdb bs=512 count=1 seek=217152 dd: error writing ‘/dev/sdb’: Input/output error Does this mean that my drive, in some way, has no spare sectors to be used for reallocation? Is my drive just in general a terrible person? (The drive isn't actually mine, I'm helping a friend out. They might have just gotten a cheap drive or something.) In case it is relevant, here is the output of smartctl -i : Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU3027748 LU WWN Device Id: 5 0014ee 25998d213 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 18 17:47:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled UPDATE: I have run shred on the disk, which has caused Current_Pending_Sector to go to zero. However, Reallocated_Sector_Ct and Reallocated_Event_Count are still zero, and dd is now able to write data to the sectors it was previously unable to. This leads me with several other questions: Why aren't the reallocations being recored by the disk? I'm assuming the reallocation took place as I can now write data directly to the sector and couldn't before. Why did shred cause reallocation and not dd? Does the fact that shred writes random data instead of just zeros make a difference?

  Read the article

• How to diagnose storage system scaling problems?

  - by Unknown

  We are currently testing the maximum sequential read throughput of a storage system (48 disks total behind two HP P2000 arrays) connected to HP DL580 G7 running RHEL 5 with 128 GB of memory. Initial testing has been mainly done by running DD-commands like this: dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=3000 In parallel for each disk. However, we have been unable to scale the results from one array (maximum throughput of 1.3 GB/s) to two (almost the same throughput). Each array is connected to a dedicated host bust adapter, so they should not be the bottleneck. The disks are currently in JBOD configuration, so each disk can be addressed directly. I have two questions: Is running multiple DD commands in parallel really a good way to test maximum read throughput? We have noticed very high SWAPIN-% numbers in iotop, which I find hard to explain because the target is /dev/null How shoud we proceed in trying to find the reason for the scaling problem? Do you thing the server itself is the bottleneck here, or could there be some linux parameters that we have overlooked?

  Read the article

• Upgrade Centos 5 tot PHP 5.2 or 5.3 [recommended way?]

  - by solid

  We are using Zend Framework and in version 2, php 5.2 will be the minimum requirement. We love CentOS and we'd like to keep using it, but PHP 5.1 just won't do anymore when developing web applications with Zend framework. I found several links to solutions to upgrade with external repositories. http://serverfault.com/questions/106801/recommended-method-to-upgrade-php-5-1-6-to-5-2-x-on-centos-5 http://www.webtatic.com/blog/2009/05/installing-php-526-on-centos-5/ http://www.webtatic.com/blog/2009/06/php-530-on-centos-5/ We'd like to see another solution with the use of an "official?" CentOS repository if any is available. We only need to upgrade PHP, the rest of the CentOS setup is fine the way it is. For us, it's important however to keep the YUM cycle intact using the normal repositories. So in short: is it even possible to upgrade only PHP by using an external repo or otherwise? While still upgrading all our other packages safely through normal yum usage? Thanks for your help!

  Read the article

• Grub error 18, gparted not showing anything

  - by Montecristo

  Some week ago I started having some problems with my pc, sometimes it just freezed not allowing me to do anything. I had to turn it off and on and sometimes do it a couple of time even at startup. Now it does not start at all, grub is giving me error 18. I have found that a solution is to create a bootable partition in the first sector of the disk. gparted does not recognize any partition, the window in which there would be my partitions is empty. sudo fdisk -l does not output anything. If I type sudo mount /dev/sda and then tab tab to autocomplete these are the devices coming out: sda sda1 sda2 sda5. If I launch sudo mount -t ext3 /dev/sda1 disk I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg outputs [ 1831.974847] EXT3-fs: unable to read superblock Do you know how to solve this issue? I'm not completely sure this is a software problem, should I try with a new hard disk?

  Read the article

• how can i move ext3 partition to the beginning of drive without losing data?

  - by Felipe Alvarez

  I have a 500GB external drive. It had two partitions, each around 250GB. I removed the first partition. I'd like to move the 2nd to the left, so it consumes 100% of the drive. How can this be accomplished without any GUI tools (CLI only)? fdisk Disk /dev/sdd: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc80b1f3d Device Boot Start End Blocks Id System /dev/sdd2 29374 60801 252445410 83 Linux parted Model: ST350032 0AS (scsi) Disk /dev/sdd: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 2 242GB 500GB 259GB primary ext3 type=83 dumpe2fs Filesystem volume name: extstar Last mounted on: <not available> Filesystem UUID: f0b1d2bc-08b8-4f6e-b1c6-c529024a777d Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal dir_index filetype needs_recovery sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 15808608 Block count: 63111168 Reserved block count: 0 Free blocks: 2449985 Free inodes: 15799302 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8208 Inode blocks per group: 513 Filesystem created: Mon Feb 15 08:07:01 2010 Last mount time: Fri May 21 19:31:30 2010 Last write time: Fri May 21 19:31:30 2010 Mount count: 5 Maximum mount count: 29 Last checked: Mon May 17 14:52:47 2010 Check interval: 15552000 (6 months) Next check after: Sat Nov 13 14:52:47 2010 Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: d0363517-c095-4f53-baa7-7428c02fbfc6 Journal backup: inode blocks Journal size: 128M

  Read the article

• What causes PHP pages to consistently download instead of running normally

  - by Jonathan

  Hi, I'm running a Ubuntu Server on a VM, to test out different web forum solutions. I have set up a ~/public_html/ to be accessible with the apache2 web server, and that works fine. However when I go to a .php file on a browser (using my VM's ip-address/~username/phpfile.php) it does not display it as it should. Instead it offers to save to file/asks what program to open it with. Interestingly though that dialog box does recognise that it is a php file. I have the following version of php installed on the system: PHP 5.3.2-1ubuntu4.5 with Suhosin-Patch (cli) (built: Sep 17 2010 13:49:46) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies And the following server: Server version: Apache/2.2.14 (Ubuntu) Server built: Nov 18 2010 21:19:09 If anyone knows what might be causing this/potential solutions it would make me very happy :) EDIT: Turns out files this behaviour was only apparent on files in the ~/public_html/ directory. All php files in /var/www/ work fine. Prizes go to whoever can explain why? :D (And by prizes I just mean a well done, no actual prizes I'm afraid.)

  Read the article

• Symbolic link modification for HP unix

  - by kalpesh

  Hi David Zaslavsky, Recently i was working on modifying the Symbolic links ... for a particular files.. while searching on internet i saw your post ... I am trying to use this script which you had posted .. find /home/user/public_html/qa/ -type l \ -lname '/home/user/public_html/dev/*' -printf \ 'ln -nsf $(readlink %p|sed s/dev/qa/) $(echo %p|sed s/dev/qa/)\n'\ script.sh SO i tried to modify your script for my problem .. in Hp unix env.. but it seems that the -lname command does not works for HP unix. do you know something equivalent that i can use ... Just to give you and idea of my problem ... I want to change all the symbolic links inside a particular folder .. New Symbolic link -- /base/testusr/scripts Old Symbolic link -- /base/produsr/scripts Now folder "A" contains more than 100 different files having soft links which points to this path -- /base/produsr/scripts But what I want is that the files inside folder A to point to this soft link --/base/testusr/scripts I am trying to achieve in Hp unix ... would really appreciate your help on this ...

  Read the article

• Is there a command to change primary group for a new user in Cygwin?

  - by Rob Gilliam

  Is there a way to set a (new) user's primary group in Cygwin's /etc/passwd file without hand-editing the file? I have a local group set up for members of the Dev Team on a Windows Server 2008 R2 box so that we can all modify a particular group files, but the regular users can only read them. As some of the work we do uses scripts that rely on Cygwin tools, this group is also in the /etc/group file. When I need to add a new user to the "Dev Team" group, I add them in Server Manager, and then use mkpasswd to add that user to Cygwin's /etc/passwd file. Unfortunately, they get the regular Domain Users group assigned as their primary group and I then have to go in and edit the passwd file to change the group. I now need to write some instructions for someone else who is not au fait with UNIX/Linux/Cygwin so that they can set up new Dev Team users and obviously "hand editing" /etc/passwd is a recipe for disaster if you don't know what you're doing. So, is there a way of getting mkpasswd to set a different primary group, or another tool like Linux's usermod which can be used for the purpose of changing the group in a more controlled manner?

  Read the article

• GRUB having problems with my sda1 UUID

  - by Igoru

  I was having trouble trying to setup triple boot on my computer... (Take a look at this thread if you think it would help). I ended up by having a GRUB menu that has Ubuntu entries and "Windows" entry, that calls an EasyBCD menu to choose between Windows 7 and XP. Everything would be fine if, only if, GRUB was set up correctly. I can't find why, but it throws me this when I try to open Ubuntu: I've already tried to remove the menu.lst and do a grub-update, and a grub-install too. I tried to create a symlink to /dev/sda1 at /dev/disk/by-uuid/<<uuid that is there>>, just like the other UUIDs that were there... But I couldn't find that symlink at that busybox that opened when it thrown me the error. Any ideas? [UPDATE] This is the GRUB entry with problems: title Ubuntu 9.04, kernel 2.6.28-15-generic uuid b1ed36e5-4d84-4eb8-86ef-6f1135ffc238 kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=b1ed36e5-4d84-4eb8-86ef-6f1135ffc238 ro quiet splash initrd /boot/initrd.img-2.6.28-15-generic quiet And this my /dev/disk/by-uuid folder: 04DCBCFBDCBCE856 - ../../sdb1 (NTFS backup disk) 4434E77734E769FE - ../../sda4 (NTFS WinXP) ACB09F0DB09EDCE0 - ../../sda2 (NTFS Win7) b5311be8-a853-4fdd-aed5-d65974b3c0c4 - ../../sda5 (EXT4 home) C04B-4D97 - ../../sdc (FAT32 live-pendrive from which i'm running) D28447F68447DB9B - ../../sda6 (NTFS files partition) e0e88f38-d815-423a-9d5e-64b9c74a8b92 - ../../sda7 (swap)

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >