Search Results

Search found 19265 results on 771 pages for 'country specific'.

Page 183/771 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• Routing a PPTP client and VMware Server instance running on the same box

  - by servermanfail

  I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

  Read the article

• Failure retrieving contents of directory

  - by Bondye

  Currently I have a couple of websites. My problem is that if I login on 1 specific domain with any of my programs (using notepadd++, FileZilla and Netbeans) the program stops at the content listing. I had it correctly running, (I'm working on a project on this domain for more than a year now) and suddenly I broke it somehow. This only happens on 1 specific domain, all other domains (from other hosts) are working. My colleague (next to me with same ip address) is able to login on this domain. Notepadd++ says: Failure retrieving contents of directory Filezilla says: Failed to retrieve directory listing Netbean popups: Upload files on save failed. (Because I have the setting upload on save enabled.) What I tried: First I thought it's my firewall, I disabled firewall but no result. Also notice that all other domain are working. Maby a blacklist with my ip address? No my colleague has the same ip address. Could anyone help me on this? Notepad++ Log [NppFTP] Everything initialized -> TYPE I Connecting -> Quit 220 ProFTPD 1.3.3e Server ready. -> USER username 331 Password required for domain -> PASS *HIDDEN* 230 User username logged in -> TYPE A 200 Type set to A -> MODE S 200 Mode set to S -> STRU F 200 Structure set to F -> CWD /domains/domain.nl/ 250 CWD command successful Connected -> CWD /domains/domain.nl/ 250 CWD command successful -> PASV 227 Entering Passive Mode (194,247,31,xx,137,xx). -> LIST -al Failure retrieving contents of directory /domains/domain.nl/ Filezilla log Status: Verbinden met 194.247.xx.xx:21... Status: Verbinding aangemaakt, welkomstbericht afwachten... Antwoord: 220 ProFTPD 1.3.3e Server ready. Commando: USER username Antwoord: 331 Password required for username Commando: PASS ******** Antwoord: 230 User username logged in Commando: SYST Antwoord: 215 UNIX Type: L8 Commando: FEAT Antwoord: 211-Features: Antwoord: MDTM Antwoord: MFMT Antwoord: LANG en-US;ja-JP;zh-TW;it-IT;fr-FR;zh-CN;ru-RU;bg-BG;ko-KR Antwoord: TVFS Antwoord: UTF8 Antwoord: AUTH TLS Antwoord: MFF modify;UNIX.group;UNIX.mode; Antwoord: MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*; Antwoord: PBSZ Antwoord: PROT Antwoord: REST STREAM Antwoord: SIZE Antwoord: 211 End Commando: OPTS UTF8 ON Antwoord: 200 UTF8 set to on Status: Verbonden Status: Mappenlijst ophalen... Commando: PWD Antwoord: 257 "/" is the current directory Commando: TYPE I Antwoord: 200 Type set to I Commando: PASV Antwoord: 227 Entering Passive Mode (194,247,31,xx,xxx,xx). Commando: MLSD Fout: Verbinding verloren Fout: Ontvangen van mappenlijst is mislukt Sorry that it's dutch.

  Read the article

• OCR anything with OneNote 2007 and 2010

  - by Matthew Guay

  Quality OCR software can often be very expensive, but you may have one already installed on your computer that you didn’t know about.  Here’s how you can use OneNote to OCR anything on your computer. OneNote is one of the overlooked gems in recent versions of Microsoft Office.  OneNote makes it simple to take notes and keep track of everything with integrated search, and offers more features than its popular competitor Evernote.  One way it is better is its high quality optical character recognition (OCR) engine.  One of Evernote’s most popular features is that you can search for anything, including text in an image, and you can easily find it.  OneNote takes this further, and instantly OCRs any text in images you add.  Then, you can use this text easily and copy it from the image.  Let’s see how this works and how you can use OneNote as the ultimate OCR. Please Note: This feature is available in OneNote 2007 and 2010.  OneNote 2007 is included with Office 2007 Home and Student, Enterprise, and Ultimate, while OneNote 2010 is included with all edition of Office 2010 except for Starter edition. OCR anything First, let’s add something to OCR into OneNote.  There are many different ways you can add items to OCR into OneNote.  Open a blank page or one you want to insert something into, and then follow these steps to add what you want into OneNote. Picture Simply drag-and-drop a picture with text into a notebook… You can insert a picture directly from OneNote as well.  In OneNote 2010, select the Insert tab, and then choose Picture. In OneNote 2007, select the Insert menu, select Picture, and then choose From File.   Screen Clipping There are many times we’d like to copy text from something we see onscreen, but there is no direct way to copy text from that thing.  For instance, you cannot copy text from the title-bar of a window, or from a flash-based online presentation.  For these cases, the Screen Clipping option is very useful.  To add a clip of anything onscreen in OneNote 2010, select the Insert tab in the ribbon and click Screen Clipping. In OneNote 2007, either click the Clip button on the toolbar or select the Insert menu and choose Screen Clipping.   Alternately, you can take a screen clipping by pressing the windows key + S. When you click Screen Clipping, OneNote will minimize, your desktop will fade lighter, and your mouse pointer will change to a plus sign.  Now, click and drag over anything you want to add to OneNote.  Here we’re selecting the title of this article. The section you selected will now show up in your OneNote notebook, complete with the date and time the clip was made. Insert a file You’re not limited to pictures; OneNote can even OCR anything in most files on your computer.  You can add files directly in OneNote 2010 by selecting File Printout in the Insert tab. In OneNote 2007, select the Insert menu and choose Files as Printout. Choose the file you want to add to OneNote in the dialog. Select Insert, and OneNote will pause momentarily as it processes the file. Now your file will show up in OneNote as a printout with a link to the original file above it. You can also send any file directly to OneNote via the OneNote virtual printer.  If you have a file open, such as a PDF, that you’d like to OCR, simply open the print dialog in that program and select the “Send to OneNote” printer. Or, if you have a scanner, you can scan documents directly into OneNote by clicking Scanner Printout in the Insert tab in OneNote 2010. In OneNote 2003, to add a scanned document select the Insert menu, select Picture, and then choose From Scanner or Camera. OCR the image, file, or screenshot you put in OneNote Now that you’ve got your stuff into OneNote, let’s put it to work.  OneNote automatically did an OCR scan on anything you inserted into OneNote.  You can check to make sure by right-clicking on any picture, screenshot, or file you inserted.  Select “Make Text in Image Searchable” and then make sure the correct language is selected. Now, you can copy text from the Picture.  Simply right-click on the picture, and select “Copy Text from Picture”. And here’s the text that OneNote found in this picture: OCR anything with OneNote 2007 and 2010 - Windows Live Writer Not bad, huh?  Now you can paste the text from the picture into a document or anywhere you need to use the text. If you are instead copying text from a printout, it may give you the option to copy text from this page or all pages of the printout.   This works the exact same in OneNote 2007. In OneNote 2010, you can also edit the text OneNote has saved in the image from the OCR.  This way, if OneNote read something incorrectly you can change it so you can still find it when you use search in OneNote.  Additionally, you can copy only a specific portion of the text from the edit box, so it can be useful just for general copying as well.  To do this, right-click on the item and select “Edit Alt Text”. Here is the window to edit alternate text.  If you want to copy only a portion of the text, simply select it and press Ctrl+C to copy that portion. Searching OneNote’s OCR engine is very useful for finding specific pictures you have saved in OneNote.  Simply enter your search query in the search box on top right, and OneNote will automatically find all instances of that term in all of your notebooks.  Notice how it highlights the search term even in the image! This works the same in OneNote 2007.  Notice how it highlighted “How-to” in a shot of the header image in our favorite website. In Windows Vista and 7, you can even search for things OneNote OCRed from the Start Menu search.  Here the start menu search found the words “Windows Live Writer” in our OCR Test notebook in OneNote where we inserted the screen clip above. Conclusion OneNote is a very useful OCR tool, and can help you capture text from just about anything.  Plus, since you can easily search everything you have stored in OneNote, you can quickly find anything you insert anytime.  OneNote is one of the least-used Office tools, but we have found it very useful and hope you do too. Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteRemove Office 2010 Beta and Reinstall Office 2007How To Create and Publish Blog Posts in Word 2010 & 2007How To Copy Worksheets in Excel 2007 & 2010Add Page Numbers to Documents in Word 2007 & 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers

  Read the article

• Error on 64 Bit Install of IIS &ndash; LoadLibraryEx failed on aspnet_filter.dll

  - by Rick Strahl

  I’ve been having a few problems with my Windows 7 install and trying to get IIS applications to run properly in 64 bit. After installing IIS and creating virtual directories for several of my applications and firing them up I was left with the following error message from IIS: Calling LoadLibraryEx on ISAPI filter “c:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll” failed This is on Windows 7 64 bit and running on an ASP.NET 4.0 Application configured for running 64 bit (32 bit disabled). It’s also on what is essentially a brand new installation of IIS and Windows 7. So it failed right out of the box. The problem here is that IIS is trying to loading this ISAPI filter from the 32 bit folder – it should be loading from Framework64 folder note the Framework folder. The aspnet_filter.dll component is a small Win32 ISAPI filter used to back up the cookieless session state for ASP.NET on IIS 7 applications. It’s not terribly important because of this focus, but it’s a default loaded component. After a lot of fiddling I ended up with two solutions (with the help and support of some Twitter folks): Switch IIS to run in 32 bit mode Fix the filter listing in ApplicationHost.config Switching IIS to allow 32 Bit Code This is a quick fix for the problem above which enables 32 bit code in the Application Pool. The problem above is that IIS is trying to load a 32 bit ISAPI filter and enabling 32 bit code gets you around this problem. To configure your Application Pool, open the Application Pool in IIS Manager bring up Advanced Options and Enable 32 Bit Applications: And voila the error message above goes away. Fix Filters Enabling 32 bit code is a quick fix solution to this problem, but not an ideal one. If you’re running a pure .NET application that doesn’t need to do COM or pInvoke Interop with 32 bit apps there’s usually no need for enabling 32 bit code in an Application Pool as you can run in native 64 bit code. So trying to get 64 bit working natively is a pretty key feature in my opinion :-) So what’s the problem – why is IIS trying to load a 32 bit DLL in a 64 bit install, especially if the application pool is configured to not allow 32 bit code at all? The problem lies in the server configuration and the fact that 32 bit and 64 bit configuration settings exist side by side in IIS. If I open my Default Web Site (or any other root Web Site) and go to the ISAPI filter list here’s what I see: Notice that there are 3 entries for ASP.NET 4.0 in this list. Only two of them however are specifically scoped to the specifically to 32 bit or 64 bit. As you can see the 64 bit filter correctly points at the Framework64 folder to load the dll, while both the 32 bit and the ‘generic’ entry point at the plain Framework 32 bit folder. Aha! Hence lies our problem. You can edit ApplicationHost.config manually, but I ran into the nasty issue of not being able to easily edit that file with the 32 bit editor (who ever thought that was a good idea???? WTF). You have to open ApplicationHost.Config in a 64 bit native text editor – which Visual Studio is not. Or my favorite editor: EditPad Pro. Since I don’t have a native 64 bit editor handy Notepad was my only choice. Or as an alternative you can use the IIS 7.5 Configuration Editor which lets you interactively browse and edit most ApplicationHost settings. You can drill into the configuration hierarchy visually to find your keys and edit attributes and sub values in property editor type interface. I had no idea this tool existed prior to today and it’s pretty cool as it gives you some visual clues to options available – especially in absence of an Intellisense scheme you’d get in Visual Studio (which doesn’t work). To use the Configuration Editor go the Web Site root and use the Configuration Editor option in the Management Group. Drill into System.webServer/isapiFilters and then click on the Collection’s … button on the right. You should now see a display like this: which shows all the same attributes you’d see in ApplicationHost.config (cool!). These entries correspond to these raw ApplicationHost.config entries: <filter name="ASP.Net_4.0" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0" /> <filter name="ASP.Net_4.0_64bit" path="C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness64" /> <filter name="ASP.Net_4.0_32bit" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness32" /> The key attribute we’re concerned with here is the preCondition and the bitness subvalue. Notice that the ‘generic’ version – which comes first in the filter list – has no bitness assigned to it, so it defaults to 32 bit and the 32 bit dll path. And this is where our problem comes from. The simple solution to fix the startup problem is to remove the generic entry from this list here or in the filters list shown earlier and leave only the bitness specific versions active. The preCondition attribute acts as a filter and as you can see here it filters the list by runtime version and bitness value. This is something to keep an eye out in general – if a bitness values are missing it’s easy to run into conflicts like this with any settings that are global and especially those that load modules and handlers and other executable code. On 64 bit systems it’s a good idea to explicitly set the bitness of all entries or remove the non-specific versions and add bit specific entries. So how did this get misconfigured? I installed IIS before everything else was installed on this machine and then went ahead and installed Visual Studio. I suspect the Visual Studio install munged this up as I never saw a similar problem on my live server where everything just worked right out of the box. In searching about this problem a lot of solutions pointed at using aspnet_regiis –r from the Framework64 directory, but that did not fix this extra entry in the filters list – it adds the required 32 bit and 64 bit entries, but it doesn’t remove the errand un-bitness set entry. Hopefully this post will help out anybody who runs into a similar situation without having to trouble shoot all the way down into the configuration settings and noticing the bitness settings. It’s a good lesson learned for me – this is my first desktop install of a 64 bit OS and things like this are what I was reluctant to find. Now that I ran into this I have a good idea what to look for with 32/64 bit misconfigurations in IIS at least.© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

  Read the article

• Consume WCF Service InProcess using Agatha and WCF

  - by REA_ANDREW

  I have been looking into this lately for a specific reason.  Some integration tests I want to write I want to control the types of instances which are used inside the service layer but I want that control from the test class instance.  One of the problems with just referencing the service is that a lot of the time this will by default be done inside a different process.  I am using StructureMap as my DI of choice and one of the tools which I am using inline with RhinoMocks is StructureMap.AutoMocking.  With StructureMap the main entry point is the ObjectFactory.  This will be process specific so if I decide that the I want a certain instance of a type to be used inside the ServiceLayer I cannot configure the ObjectFactory from my test class as that will only apply to the process which it belongs to. This is were I started thinking about two things: Running a WCF in process Being able to share mocked instances across processes A colleague in work pointed me to a project which is for the latter but I thought that it would be a better solution if I could run the WCF Service in process.  One of the projects which I use when I think about WCF Services is AGATHA, and the one which I have to used to try and get my head around doing this. Another asset I have is a book called Programming WCF Services by Juval Lowy and if you have not heard of it or read it I would definately recommend it.  One of the many topics that is inside this book is the type of configuration you need to communicate with a service in the same process, and it turns out to be quite simple from a config point of view. <system.serviceModel> <services> <service name="Agatha.ServiceLayer.WCF.WcfRequestProcessor"> <endpoint address ="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </service> </services> <client> <endpoint name="MyEndpoint" address="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </client> </system.serviceModel>   You can see here that I am referencing the Agatha object and contract here, but also that my binding and the address is something called Named Pipes.  THis is sort of the “Magic” which makes it happen in the same process. Next I need to open the service prior to calling the methods on a proxy which I also need.  My initial attempt at the proxy did not use any Agatha specific coding and one of the pains I found was that you obviously need to give your proxy the known types which the serializer can be aware of.  So we need to add to the known types of the proxy programmatically.  I came across the following blog post which showed me how easy it was http://bloggingabout.net/blogs/vagif/archive/2009/05/18/how-to-programmatically-define-known-types-in-wcf.aspx. First Pass So with this in mind, and inside a console app this was my first pass at consuming a service in process.  First here is the proxy which I made making use of the Agatha IWcfRequestProcessor contract. public class InProcProxy : ClientBase<Agatha.Common.WCF.IWcfRequestProcessor>, Agatha.Common.WCF.IWcfRequestProcessor { public InProcProxy() { } public InProcProxy(string configurationName) : base(configurationName) { } public Agatha.Common.Response[] Process(params Agatha.Common.Request[] requests) { return Channel.Process(requests); } public void ProcessOneWayRequests(params Agatha.Common.OneWayRequest[] requests) { Channel.ProcessOneWayRequests(requests); } } So with the proxy in place I could then use this after opening the service so here is the code which I use inside the console app make the request. static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new InProcProxy()) { foreach (var operation in proxy.Endpoint.Contract.Operations) { foreach (var t in KnownTypeProvider.GetKnownTypes(null)) { operation.KnownTypes.Add(t); } } var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } So what I used here is the KnownTypeProvider of Agatha to easily get all the types I need for the service/proxy and add them to the proxy.  My Request handler for this was just a test one which always returned 2 products. public class GetProductsHandler : RequestHandler<GetProductsRequest,GetProductsResponse> { public override Agatha.Common.Response Handle(GetProductsRequest request) { return new GetProductsResponse { Products = new List<ProductDto> { new ProductDto{}, new ProductDto{} } }; } } Second Pass Now after I did this I started reading up some more on some resources including more by Davy Brion and others on Agatha.  Now it turns out that the work I did above to create a derived class of the ClientBase implementing Agatha.Common.WCF.IWcfRequestProcessor was not necessary due to a nice class which is present inside the Agatha code base, RequestProcessorProxy which takes care of this for you! :-) So disregarding that class I made for the proxy and changing my code to use it I am now left with the following: static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new RequestProcessorProxy()) { var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); }   Cheers for now, Andy References Agatha WCF InProcess Without WCF StructureMap.AutoMocking Cross Process Mocking Agatha Programming WCF Services by Juval Lowy

  Read the article

• Getting Started with Boxee

  - by DigitalGeekery

  Boxee is a free Media PC application that runs on Windows, Mac, and Ubuntu Linux. With Boxee, you can integrate online video, music and pictures, with your own local media and social networking. Today we are going to take a closer look at Boxee and some of it’s features. Note: We used Windows 7 for this tutorial. Your experience on a Mac or Ubuntu Linux build may vary slightly. Hardware Requirements x86 (Intel/AMD processor) based system running at 1.0GHz or greater 512MB system memory (RAM) or more Video card capable of OpenGL 1.4, Direct X 9.0 Software Requirements Mac OS X 10.4+ (Intel based processor) Ubuntu Linux 9.04+ x86 only Windows XP / Vista / 7 (64 bit in Vista or 7) Installing Boxee Before downloading and installing Boxee, you’ll need to register for a free account. (See link below) Once your account is registered and verified, you’ll be able to log in and download the application. Installation is pretty straightforward…just take the defaults. Boxee will open in full screen mode and you’ll be prompted to login with your username and password. Before you login, you may want to take a moment to click on the “Guide” icon and learn a bit about navigating in Boxee. Some basic keyboard navigation is as follows. Move right, left, up, & down with the arrow keys. Hit “Enter” to make a selection, the forward slash key “\” to toggle between full screen and windowed mode, and “Esc” to go back to the previous screen. For Playback, the volume is controlled by plus & minus (+/-) keys, you can Play / Pause using the spacebar, and skip using the arrow keys. Boxee will also work with any infrared remote. If you have an iPhone or iPod Touch you can download software to enable them as a Boxee remote. If you’re using a mouse and keyboard, hover over the username and password boxes to enter your login credentials. If using a a remote, click your OK button and enter credentials with the on screen keyboard. Click “Done” when finished.   When you are ready to login, enter your credentials and click “Login.” On first login, you’ll be prompted to calibrate your screen. If you choose “Skip” you can always calibrate your screen later under Settings > Appearance > Screen. When Boxee opens, you’ll be greeted by the Home screen. To the left will be your Feeds. This will be any recommended content from friends on Boxee, and social networks such as Facebook and Twitter. Although, when you first login, it will mainly be info from the Boxee staff. You’ll have “Featured” content in the center and your Queue on the right. You’ll also have the Menu along the top.   Pop Up Menu The Pop Menu can be accessed by hitting the “Esc” key, or back on your remote. Depending on where you are located in Boxee, you may have to hit it a few time to “back out” to the Pop Up menu. From the Pop Up Menu, you can easily access any of the resources, settings, and favorites. Queue The Queue is your playlist of TV shows, movies, or Internet videos you wish to watch. When you find an offering you’d like to watch, select it and then click “Add to Queue.” The selected item will be added to your Queue and can be accessed at any time from the Menu. TV Show Library The TV Show library can contain files from your local hard drive or streaming content from the Web. Boxee pulls content from a variety of online locations such as Hulu and TV network sites. Click on the show to see which specific episodes are currently available. To search for your favorite shows, click on the yellow arrow to the left, or navigate to the left with your keyboard or remote. Enter your selection into the search box. My Apps By default, the “My Apps” section includes a list of the most popular apps, such as Netflix, Pandora, YouTube, and others. You can remove Apps from “My Apps,” or add new Apps from the Apps Library.   To access all the available Apps, click on the left arrow button, or click on the yellow arrow at the left, then select “App Library.” Choose an App from the Library and click it to open… … and then select “Add to My Apps.” Or, you can click start to play the App if you don’t wish to Add it to your “My Apps.”   Music, Pictures, and Movies Boxee will scan your PC for movies, pictures, and music. You can choose to scan specific folders by clicking on “Scan Media Folders…” … or from the Pop Up Menu, selecting Settings > Media, and then browsing for your media.   Conclusion Boxee to be a great way to integrate your local media with online streaming content. It can be run as an application on your home PC, or as a stand alone media PC. It should also be noted, however, that your access to online content will vary depending on your country. If you are a Windows Media Center user and and want to add the additional features of Boxee, check out our article on integrating Boxee with Windows 7 Media Center. Download Boxee Similar Articles Productive Geek Tips Integrate Boxee with Media Center in Windows 7Disable Fast User Switching on Windows XPOops! Sorry About the Feed ErrorsDisplay a list of Started Services from the Command Line (Windows)Feedburner to Google: Worst Transition Ever. TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Are SMART goals useful for programmers?

  - by Craig Schwarze

  Several organisations I know use SMART goals for their programmers. SMART is an acronym for Specific, Measurable, Achievable, Relevant and Time-Bound. They are fairly common in large corporations. My own prior experience with SMART goals has not been all that positive. Have other programmers found them an effective way to measure performance? What are some examples of good SMART goals for programmers (if they exist).

  Read the article

• Adding DTrace Probes to PHP Extensions

  - by cj

  The powerful DTrace tracing facility has some PHP-specific probes that can be enabled with --enable-dtrace. DTrace for Linux is being created by Oracle and is currently in tech preview. Currently it doesn't support userspace tracing so, in the meantime, Systemtap can be used to monitor the probes implemented in PHP. This was recently outlined in David Soria Parra's post Probing PHP with Systemtap on Linux. My post shows how DTrace probes can be added to PHP extensions and traced on Linux. I was using Oracle Linux 6.3. Not all Linux kernels are built with Systemtap, since this can impact stability. Check whether your running kernel (or others installed) have Systemtap enabled, and reboot with such a kernel: # grep CONFIG_UTRACE /boot/config-`uname -r` # grep CONFIG_UTRACE /boot/config-* When you install Systemtap itself, the package systemtap-sdt-devel is needed since it provides the sdt.h header file: # yum install systemtap-sdt-devel You can now install and build PHP as shown in David's article. Basically the build is with: $ cd ~/php-src $ ./configure --disable-all --enable-dtrace $ make (For me, running 'make' a second time failed with an error. The workaround is to do 'git checkout Zend/zend_dtrace.d' and then rerun 'make'. See PHP Bug 63704) David's article shows how to trace the probes already implemented in PHP. You can also use Systemtap to trace things like userspace PHP function calls. For example, create test.php: <?php $c = oci_connect('hr', 'welcome', 'localhost/orcl'); $s = oci_parse($c, "select dbms_xmlgen.getxml('select * from dual') xml from dual"); $r = oci_execute($s); $row = oci_fetch_array($s, OCI_NUM); $x = $row[0]->load(); $row[0]->free(); echo $x; ?> The normal output of this file is the XML form of Oracle's DUAL table: $ ./sapi/cli/php ~/test.php <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> To trace the PHP function calls, create the tracing file functrace.stp: probe process("sapi/cli/php").function("zif_*") { printf("Started function %s\n", probefunc()); } probe process("sapi/cli/php").function("zif_*").return { printf("Ended function %s\n", probefunc()); } This makes use of the way PHP userspace functions (not builtins) like oci_connect() map to C functions with a "zif_" prefix. Login as root, and run System tap on the PHP script: # cd ~cjones/php-src # stap -c 'sapi/cli/php ~cjones/test.php' ~cjones/functrace.stp Started function zif_oci_connect Ended function zif_oci_connect Started function zif_oci_parse Ended function zif_oci_parse Started function zif_oci_execute Ended function zif_oci_execute Started function zif_oci_fetch_array Ended function zif_oci_fetch_array Started function zif_oci_lob_load <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> Ended function zif_oci_lob_load Started function zif_oci_free_descriptor Ended function zif_oci_free_descriptor Each call and return is logged. The Systemtap scripting language allows complex scripts to be built. There are many examples on the web. To augment this generic capability and the PHP probes in PHP, other extensions can have probes too. Below are the steps I used to add probes to OCI8: I created a provider file ext/oci8/oci8_dtrace.d, enabling three probes. The first one will accept a parameter that runtime tracing can later display: provider php { probe oci8__connect(char *username); probe oci8__nls_start(); probe oci8__nls_done(); }; I updated ext/oci8/config.m4 with the PHP_INIT_DTRACE macro. The patch is at the end of config.m4. The macro takes the provider prototype file, a name of the header file that 'dtrace' will generate, and a list of sources files with probes. When --enable-dtrace is used during PHP configuration, then the outer $PHP_DTRACE check is true and my new probes will be enabled. I've chosen to define an OCI8 specific macro, HAVE_OCI8_DTRACE, which can be used in the OCI8 source code: diff --git a/ext/oci8/config.m4 b/ext/oci8/config.m4 index 34ae76c..f3e583d 100644 --- a/ext/oci8/config.m4 +++ b/ext/oci8/config.m4 @@ -341,4 +341,17 @@ if test "$PHP_OCI8" != "no"; then PHP_SUBST_OLD(OCI8_ORACLE_VERSION) fi + + if test "$PHP_DTRACE" = "yes"; then + AC_CHECK_HEADERS([sys/sdt.h], [ + PHP_INIT_DTRACE([ext/oci8/oci8_dtrace.d], + [ext/oci8/oci8_dtrace_gen.h],[ext/oci8/oci8.c]) + AC_DEFINE(HAVE_OCI8_DTRACE,1, + [Whether to enable DTrace support for OCI8 ]) + ], [ + AC_MSG_ERROR( + [Cannot find sys/sdt.h which is required for DTrace support]) + ]) + fi + fi In ext/oci8/oci8.c, I added the probes at, for this example, semi-arbitrary places: diff --git a/ext/oci8/oci8.c b/ext/oci8/oci8.c index e2241cf..ffa0168 100644 --- a/ext/oci8/oci8.c +++ b/ext/oci8/oci8.c @@ -1811,6 +1811,12 @@ php_oci_connection *php_oci_do_connect_ex(char *username, int username_len, char } } +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_CONNECT_ENABLED()) { + DTRACE_OCI8_CONNECT(username); + } +#endif + /* Initialize global handles if they weren't initialized before */ if (OCI_G(env) == NULL) { php_oci_init_global_handles(TSRMLS_C); @@ -1870,11 +1876,22 @@ php_oci_connection *php_oci_do_connect_ex(char *username, int username_len, char size_t rsize = 0; sword result; +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_NLS_START_ENABLED()) { + DTRACE_OCI8_NLS_START(); + } +#endif PHP_OCI_CALL_RETURN(result, OCINlsEnvironmentVariableGet, (&charsetid_nls_lang, 0, OCI_NLS_CHARSET_ID, 0, &rsize)); if (result != OCI_SUCCESS) { charsetid_nls_lang = 0; } smart_str_append_unsigned_ex(&hashed_details, charsetid_nls_lang, 0); + +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_NLS_DONE_ENABLED()) { + DTRACE_OCI8_NLS_DONE(); + } +#endif } timestamp = time(NULL); The oci_connect(), oci_pconnect() and oci_new_connect() calls all use php_oci_do_connect_ex() internally. The first probe simply records that the PHP application made a connection call. I already showed a way to do this without needing a probe, but adding a specific probe lets me record the username. The other two probes can be used to time how long the globalization initialization takes. The relationships between the oci8_dtrace.d names like oci8__connect, the probe guards like DTRACE_OCI8_CONNECT_ENABLED() and probe names like DTRACE_OCI8_CONNECT() are obvious after seeing the pattern of all three probes. I included the new header that will be automatically created by the dtrace tool when PHP is built. I did this in ext/oci8/php_oci8_int.h: diff --git a/ext/oci8/php_oci8_int.h b/ext/oci8/php_oci8_int.h index b0d6516..c81fc5a 100644 --- a/ext/oci8/php_oci8_int.h +++ b/ext/oci8/php_oci8_int.h @@ -44,6 +44,10 @@ # endif # endif /* osf alpha */ +#ifdef HAVE_OCI8_DTRACE +#include "oci8_dtrace_gen.h" +#endif + #if defined(min) #undef min #endif Now PHP can be rebuilt: $ cd ~/php-src $ rm configure && ./buildconf --force $ ./configure --disable-all --enable-dtrace \ --with-oci8=instantclient,/home/cjones/instantclient $ make If 'make' fails, do the 'git checkout Zend/zend_dtrace.d' trick I mentioned. The new probes can be seen by logging in as root and running: # stap -l 'process.provider("php").mark("oci8*")' -c 'sapi/cli/php -i' process("sapi/cli/php").provider("php").mark("oci8__connect") process("sapi/cli/php").provider("php").mark("oci8__nls_done") process("sapi/cli/php").provider("php").mark("oci8__nls_start") To test them out, create a new trace file, oci.stp: global numconnects; global start; global numcharlookups = 0; global tottime = 0; probe process.provider("php").mark("oci8-connect") { printf("Connected as %s\n", user_string($arg1)); numconnects += 1; } probe process.provider("php").mark("oci8-nls_start") { start = gettimeofday_us(); numcharlookups++; } probe process.provider("php").mark("oci8-nls_done") { tottime += gettimeofday_us() - start; } probe end { printf("Connects: %d, Charset lookups: %ld\n", numconnects, numcharlookups); printf("Total NLS charset initalization time: %ld usecs/connect\n", (numcharlookups 0 ? tottime/numcharlookups : 0)); } This calculates the average time that the NLS character set lookup takes. It also prints out the username of each connection, as an example of using parameters. Login as root and run Systemtap over the PHP script: # cd ~cjones/php-src # stap -c 'sapi/cli/php ~cjones/test.php' ~cjones/oci.stp Connected as cj <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> Connects: 1, Charset lookups: 1 Total NLS charset initalization time: 164 usecs/connect This shows the time penalty of making OCI8 look up the default character set. This time would be zero if a character set had been passed as the fourth argument to oci_connect() in test.php.

  Read the article

• Solaris 11 Launch Blog Carnival Roundup

  - by constant

  Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

  Read the article

• DiscountASP.NET Launches SQL Server Profiling as a Service

  - by wisecarver

  DiscountASP.NET announces enhancing our SQL Server hosting with the launch of SQL Server Profiling as a service. SQL Profiler is a powerful tool that allows the application and database developer to troubleshoot general SQL locking problems, performance issues, and perform database tuning. With our SQL Profiling as a Service customers can schedule a database trace at a specific time of their choosing and offers a new way to help our customers troubleshoot. For more information, visit: http://www...(read more)

  Read the article

• DiscountASP.NET Launches SQL Server Profiling as a Service

  - by wisecarver

  DiscountASP.NET announces enhancing our SQL Server hosting with the launch of SQL Server Profiling as a service. SQL Profiler is a powerful tool that allows the application and database developer to troubleshoot general SQL locking problems, performance issues, and perform database tuning. With our SQL Profiling as a Service customers can schedule a database trace at a specific time of their choosing and offers a new way to help our customers troubleshoot. For more information, visit: http://www...(read more)

  Read the article

• C++ Multithreading on Unix

  - by Roger

  I have two related questions: 1) Are there any good books for multithreading in C++, especially now that C++11 contains multithreading in the standard library? 2) I have the Wrox Programming on Unix book (1000 pages fat red one) and within it, it uses the Unix Thread class. How does this code relate to boost and the C++11 multithreading libraries? Is it better/worse/just specific to Unix etc? Is the performance the same?

  Read the article

• Looking ahead at 2011-with Gartner

  - by andrea.mulder

  Speaking of forecasting the future. Gartner highlighted the top 10 technologies and trends that will be strategic for most organizations in 2011. While Gartner's predictions are not specific to CRM, you just cannot help but notice some of the common themes in store for 2011. The top 10 strategic technologies for 2011 include: Cloud Computing Mobile Applications and Media Tablets Social Communications and Collaborations Video Next Generation Analytics Social Analytics Context-Aware Computing Storage Class Memory Ubiquitous Computing Fabric-Based Infrastructure and Computers

  Read the article

• Hey, Google: It’s Time to Add Multi-Window Multitasking To Android

  - by Chris Hoffman

  In 2012, Google’s Dianne Hackborn threatened to revoke CyanogenMod’s access to the Android Market if they moved forward with adding “Cornerstone” multitasking to their custom ROM. Samsung has since created their own multi-window multitasking feature. Dianne Hackborn said this “is something that needs to be done at the mainline platform level” so apps wouldn’t break. She was right — Android needs this as a standard feature and it’s time for Google to provide it. Doesn’t Android Have Multitasking? Android originally stood out from Apple’s iOS with its powerful multitasking. Applications can continue running in the background while you’re using another application. This makes Android powerful — you can even have BitTorrent clients downloading files in the background while using another app. Android still kept the design of a single app on screen at a time. This made a lot of sense when Android only ran on smartphones with small screens. Today, Android runs on everything from smaller smartphones all the way up to huge “phablets” like the Galaxy Note. Android has gone beyond phones and runs on 12-inch tablets, convertibles with keyboard docks, laptops, and even Android desktops. Android isn’t just a phone operating system. Samsung’s Multi-Window Isn’t Good Enough Samsung has tried to add value to Android by adding a multi-window feature. When you’re using a high-end phone like the Galaxy Note or Galaxy S, or a Galaxy tablet, you have the ability to run certain apps side-by-side with each other. There are big problems here. This only works on Samsung devices, and only on specific Samsung devices. To add support for this feature in a way that doesn’t break other apps, Samsung’s multi-window feature also only works with specific apps. You can’t just run any app in multi-window view, only the apps on the Multi Window bar Samsung provides. This prevents third-party apps from breaking, which is what Google was worried about with CyanogenMod’s Cornerstone feature. A feature that only works with a handful of apps on specific devices from a single manufacturer isn’t good enough. This feature needs to work on every Android device — or at least ones with suitably large screens and powerful enough internals. It needs to be an Android platform feature so application developers can ensure their apps will work properly with it on every device. Android developers shouldn’t have to add support for each manufacturer’s own multi-window feature if other manufacturers decide to copy Samsung. Floating Apps Are a Dirty Hack Floating apps also enable real multitasking. Remember that Android allows apps to run in the background while you’re using an app in the foreground. These apps can present interfaces that appear floating above the current app — think of it like using “always on top” to make a window always appear over every other app on a desktop operating system. You can install floating apps to browse the web, take notes, chat, and watch videos while using any app. Only apps specifically designed to run as floating apps will work, so you have to seek them out. Floating apps are also awkward to use because they float over the app you’re using, blocking parts of its interface. Microsoft added floating-window support to Skype for Android. You can have a video conversation and the other person’s face will always appear on your screen, even when you leave the Skype app. Microsoft is using more of Android’s multi-window multitasking power than Google is. Custom ROMs and Root-Only Tweaks Aren’t Acceptable Some custom ROMs are adding this feature to Android. Google threatened to revoke CyanogenMod’s access to the Android Market (now known as Google Play) if they added this feature because it could potentially break third-party apps. Today, other custom ROMs are working on split-screen multitasking. Samsung added their own version to their own devices. You can also get this feature by using a root-only Xposed Framework tweak known as XMultiWindow. If you have root access, you can get multi-window multitasking or any app on your device. This shouldn’t require rooting your device or installing a custom ROM. These third-party solutions often have awkward interfaces and bugs. We need an integrated, supported solution that works the same on every device. Why Multi-Window is Important Microsoft’s Windows 8.1 stands out among tablet operating systems for its powerful multitasking support, allowing you to view several apps side-by-side at the same time. Apple is also reported to be working on adding side-by-side apps to the iPad with iOS 8. On every competitor’s operating system, you’ll be able to view a web page while you write an email, watch a video while you browse the web, or chat with someone while you do anything else. But Android’s still remained frozen in time. Despite all Android’s underlying power — and despite the way Android allows apps to adapt to different screen sizes — Google is resisting adding this feature. Large-screen Android tablets like the Nexus 10 (remember that tablet Google hasn’t updated in over 18 months?) need this feature. So do huge phones, convertibles, laptops, and Android desktops. If tablets are the future of personal computing, we should be able to do more than one thing at a time on our tablets’ big screens. Microsoft, Samsung, and even Apple are realizing this — now it’s Google’s turn. Image Credit: Sergey Galyonkin on Flickr, Karlis Dambrans on Flickr

  Read the article

• SQL Server 2008 Best Practices Analyzer - keep an eye for the release

  - by ssqa.net

  What practice do you classify as a best practice? The answer is its not a rocket science, you don't need any specific formula to satisfy the need! Ok what if a tool can follow those common best practices & perform ... read from here ....(read more)

  Read the article

• Analyze your IIS Log Files - Favorite Log Parser Queries

  - by The Official Microsoft IIS Site

  The other day I was asked if I knew about a tool that would allow users to easily analyze the IIS Log Files, to process and look for specific data that could easily be automated. My recommendation was that if they were comfortable with using a SQL-like language that they should use Log Parser . Log Parser is a very powerful tool that provides a generic SQL-like language on top of many types of data like IIS Logs, Event Viewer entries, XML files, CSV files, File System and others; and it allows you...(read more)

  Read the article

• Looking for Your Next Challenge...Don't Stretch Too Far

  - by david.talamelli

  In my role as a Recruiter at Oracle I receive a large number of resumes of people who are interested in working with us. People contact me for a number of reasons, it can be about a specific role that we may be hiring for or they may send me an email asking if there are any suitable roles for them. Sometimes when I speak to people we have similar roles available to the roles that they may actually be in now. Sometimes people are interested in making this type of sideways move if their motivation to change jobs is not necessarily that they are looking for increased responsibility or career advancement (example: money, redundancy, work environment). However there are times when after walking through a specific role with a candidate that they may say to me - "You know that is very similar to the role that I am doing now. I would not want to move unless my next role presents me with the next challenge in my career". This is a far statement - if a person is looking to change jobs for the next step in their career they should be looking at suitable opportunities that will address their need. In this instance a sideways step will not really present any new challenges or responsibilities. The main change would be the company they are working for. Candidates looking for a new role because they are looking to move up the ladder should be looking for a role that offers them the next level of responsibility. I think the best job changes for people who are looking for career advancement are the roles that stretch someone outside of their comfort zone but do not stretch them so much that they can't cope with the added responsibilities and pressure. In my head I often think of this example in the same context of an elastic band - you can stretch it, but only so much before it snaps. That is what you should be looking for - to be stretched but not so much that you snap. If you are for example in an individual contributor role and would like to move into a management role - you may not be quite ready to take on a role that is managing a large workforce or requires significant people management experience. While your intentions may be right, your lack of management experience may fit you outside of the scope of search to be successful this type of role. In this example you can move from an individual contributor role to a management role but it may need to be managing a smaller team rather than a larger team. While you are trying to make this transition you can try to pick up some responsibilities in your current role that would give you the skills and experience you need for your next role. Never be afraid to put your hand up to help on a new project or piece of work. You never know when that newly gained experience may come in handy in your career. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

  Read the article

• [SQLServer JDBC Driver][SQLServer]Could not find stored procedure 'master..xp_jdbc_open2'.

  - by Vijaya Moderator -Oracle

  When connecting to MS SQL Server Database via Weblogic Datasource and using XA jdbc driver, the following error is thrown. <Jun 3, 2014 5:16:49 AM PDT> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Could not find stored procedure 'master..xp_jdbc_open2'. at weblogic.jdbc.sqlserverbase.ddb_.b(Unknown Source)at weblogic.jdbc.sqlserverbase.ddb_.a(Unknown Source)at weblogic.jdbc.sqlserverbase.ddb9.b(Unknown Source)at weblogic.jdbc.sqlserverbase.ddb9.a(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddr.v(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddr.a(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddq.a(Unknown Source)at weblogic.jdbc.sqlserver.tds.ddr.a(Unknown Source)at weblogic.jdbc.sqlserver.ddj.m(Unknown Source)at weblogic.jdbc.sqlserverbase.ddel.e(Unknown Source)at weblogic.jdbc.sqlserverbase.ddel.a(Unknown Source)  The cause behind the issue is that  the MS SQL Server was not installed with the Stored procedures to enable JTA/XA Solution To connect to SQL Server via XA Driver from WLS Datasource you need to install Stored Procedures for JTATo use JDBC distributed transactions through JTA, your system administrator should use the following procedure to install Microsoft SQL Server JDBC XA procedures. This procedure must be repeated for each MS SQL Server installation that will be involved in a distributed transaction.To install stored procedures for JTA:1. Copy the appropriate sqljdbc.dll and instjdbc.sql files from the WL_HOME\server\lib directory to the SQL_Server_Root/bin directory of the MS SQL Server database server, where WL_HOME is the directory in which WebLogic server is installed, typically c:\Oracle\Middleware\wlserver_10.x.  Note:  If you are installing stored procedures on a database server with multiple Microsoft SQL Server instances, each running SQL Server instance must be able to locate the sqljdbc.dll file.Therefore the sqljdbc.dll file needs to be anywhere on the global PATH or on the application-specific path. For the application-specific path, place the sqljdbc.dll file into the :\Program Files\Microsoft SQL Server\MSSQL$\Binn directory for each instance. 2. From the database server, use the ISQL utility to run the instjdbc.sql script. As a precaution, have your system administrator back up the master database before running instjdbc.sql. At a command prompt, use the following syntax to run instjdbc.sql:  ISQL -Usa -Psa_password -Sserver_name -ilocation\instjdbc.sql  where:  sa_password is the password of the system administrator.  server_name is the name of the server on which SQL Server resides.  location is the full path to instjdbc.sql. (You copied this script to the SQL_Server_Root/bin directory in step 1.)  The instjdbc.sql script generates many messages. In general, these messages can be ignored; however, the system administrator should scan the output for any messages that may indicate an execution error. The last message should indicate that instjdbc.sql ran successfully. The script fails when there is insufficient space available in the master database to store the JDBC XA procedures or to log changes to existing procedures.

  Read the article

• Validating a linked item&rsquo;s data template in Sitecore

  - by Kyle Burns

  I’ve been doing quite a bit of work in Sitecore recently and last week I encountered a situation that it appears many others have hit.  I was working with a field that had been configured originally as a grouped droplink, but now needed to be updated to support additional levels of hierarchy in the folder structure.  If you’ve done any work in Sitecore that statement makes sense, but if not it may seem a bit cryptic.  Sitecore offers a number of different field types and a subset of these field types focus on providing links either to other items on the content tree or to content that is not stored in Sitecore.  In the case of the grouped droplink, the field is configured with a “root” folder and each direct descendant of this folder is considered to be a header for a grouping of other items and displayed in a dropdown.  A picture is worth a thousand words, so consider the following piece of a content tree: If I configure a grouped droplink field to use the “Current” folder as its datasource, the control that gets to my content author looks like this: This presents a nicely organized display and limits the user to selecting only the direct grandchildren of the folder root.  It also presents the limitation that struck as we were thinking through the content architecture and how it would hold up over time – the authors cannot further organize content under the root folder because of the structure required for the dropdown to work.  Over time, not allowing the hierarchy to go any deeper would prevent out authors from being able to organize their content in a way that it would be found when needed, so the grouped droplink data type was not going to fit the bill. I needed to look for an alternative data type that allowed for selection of a single item and limited my choices to descendants of a specific node on the content tree.  After looking at the options available for links in Sitecore and considering them against each other, one option stood out as nearly perfect – the droptree.  This field type stores its data identically to the droplink and allows for the selection of zero or one items under a specific node in the content tree.  By changing my data template to use droptree instead of grouped droplink, the author is now presented with the following when selecting a linked item: Sounds great, but a did say almost perfect – there’s still one flaw.  The code intended to display the linked item is expecting the selection to use a specific data template (or more precisely it makes certain assumptions about the fields that will be present), but the droptree does nothing to prevent the author from selecting a folder (since folders are items too) instead of one of the items contained within a folder.  I looked to see if anyone had already solved this problem.  I found many people discussing the problem, but the closest that I found to a solution was the statement “the best thing would probably be to create a custom validator” with no further discussion in regards to what this validator might look like.  I needed to create my own validator to ensure that the user had not selected a folder.  Since so many people had the same issue, I decided to make the validator as reusable as possible and share it here. The validator that I created inherits from StandardValidator.  In order to make the validator more intuitive to developers that are familiar with the TreeList controls in Sitecore, I chose to implement the following parameters: ExcludeTemplatesForSelection – serves as a “deny list”.  If the data template of the selected item is in this list it will not validate IncludeTemplatesForSelection – this can either be empty to indicate that any template not contained in the exclusion list is acceptable or it can contain the list of acceptable templates Now that I’ve explained the parameters and the purpose of the validator, I’ll let the code do the rest of the talking: 1: /// <summary> 2: /// Validates that a link field value meets template requirements 3: /// specified using the following parameters: 4: /// - ExcludeTemplatesForSelection: If present, the item being 5: /// based on an excluded template will cause validation to fail. 6: /// - IncludeTemplatesForSelection: If present, the item not being 7: /// based on an included template will cause validation to fail 8: /// 9: /// ExcludeTemplatesForSelection trumps IncludeTemplatesForSelection 10: /// if the same value appears in both lists. Lists are comma seperated 11: /// </summary> 12: [Serializable] 13: public class LinkItemTemplateValidator : StandardValidator 14: { 15: public LinkItemTemplateValidator() 16: { 17: } 18:   19: /// <summary> 20: /// Serialization constructor is required by the runtime 21: /// </summary> 22: /// <param name="info"></param> 23: /// <param name="context"></param> 24: public LinkItemTemplateValidator(SerializationInfo info, StreamingContext context) : base(info, context) { } 25:   26: /// <summary> 27: /// Returns whether the linked item meets the template 28: /// constraints specified in the parameters 29: /// </summary> 30: /// <returns> 31: /// The result of the evaluation. 32: /// </returns> 33: protected override ValidatorResult Evaluate() 34: { 35: if (string.IsNullOrWhiteSpace(ControlValidationValue)) 36: { 37: return ValidatorResult.Valid; // let "required" validation handle 38: } 39:   40: var excludeString = Parameters["ExcludeTemplatesForSelection"]; 41: var includeString = Parameters["IncludeTemplatesForSelection"]; 42: if (string.IsNullOrWhiteSpace(excludeString) && string.IsNullOrWhiteSpace(includeString)) 43: { 44: return ValidatorResult.Valid; // "allow anything" if no params 45: } 46:   47: Guid linkedItemGuid; 48: if (!Guid.TryParse(ControlValidationValue, out linkedItemGuid)) 49: { 50: return ValidatorResult.Valid; // probably put validator on wrong field 51: } 52:   53: var item = GetItem(); 54: var linkedItem = item.Database.GetItem(new ID(linkedItemGuid)); 55:   56: if (linkedItem == null) 57: { 58: return ValidatorResult.Valid; // this validator isn't for broken links 59: } 60:   61: var exclusionList = (excludeString ?? string.Empty).Split(','); 62: var inclusionList = (includeString ?? string.Empty).Split(','); 63:   64: if ((inclusionList.Length == 0 || inclusionList.Contains(linkedItem.TemplateName)) 65: && !exclusionList.Contains(linkedItem.TemplateName)) 66: { 67: return ValidatorResult.Valid; 68: } 69:   70: Text = GetText("The field \"{0}\" specifies an item which is based on template \"{1}\". This template is not valid for selection", GetFieldDisplayName(), linkedItem.TemplateName); 71:   72: return GetFailedResult(ValidatorResult.FatalError); 73: } 74:   75: protected override ValidatorResult GetMaxValidatorResult() 76: { 77: return ValidatorResult.FatalError; 78: } 79:   80: public override string Name 81: { 82: get { return @"LinkItemTemplateValidator"; } 83: } 84: }   In this blog entry, I have shared some code that I found useful in solving a problem that seemed fairly common.  Hopefully the next person that is looking for this answer finds it useful as well.

  Read the article

• How to update all the SSIS packages&rsquo; Connection Managers in a BIDS project with PowerShell

  - by Luca Zavarella

  During the development of a BI solution, we all know that 80% of the time is spent during the ETL (Extract, Transform, Load) phase. If you use the BI Stack Tool provided by Microsoft SQL Server, this step is accomplished by the development of n Integration Services (SSIS) packages. In general, the number of packages made ??in the ETL phase for a non-trivial solution of BI is quite significant. An SSIS package, therefore, extracts data from a source, it "hammers" :) the data and then transfers it to a specific destination. Very often it happens that the connection to the source data is the same for all packages. Using Integration Services, this results in having the same Connection Manager (perhaps with the same name) for all packages: The source data of my BI solution comes from an Helper database (HLP), then, for each package tha import this data, I have the HLP Connection Manager (the use of a Shared Data Source is not recommended, because the Connection String is wired and therefore you have to open the SSIS project and use the proper wizard change it...). In order to change the HLP Connection String at runtime, we could use the Package Configuration, or we could run our packages with DTLoggedExec by Davide Mauri (a must-have if you are developing with SQL Server 2005/2008). But my need was to change all the HLP connections in all packages within the SSIS Visual Studio project, because I had to version them through Team Foundation Server (TFS). A good scribe with a lot of patience should have changed by hand all the connections by double-clicking the HLP Connection Manager of each package, and then changing the referenced server/database: Not being endowed with such virtues :) I took just a little of time to write a small script in PowerShell, using the fact that a SSIS package (a .dtsx file) is nothing but an xml file, and therefore can be changed quite easily. I'm not a guru of PowerShell, but I managed more or less to put together the following lines of code: $LeftDelimiterString = "Initial Catalog=" $RightDelimiterString = ";Provider=" $ToBeReplacedString = "AstarteToBeReplaced" $ReplacingString = "AstarteReplacing" $MainFolder = "C:\MySSISPackagesFolder" $files = get-childitem "$MainFolder" *.dtsx `       | Where-Object {!($_.PSIsContainer)} foreach ($file in $files) {       (Get-Content $file.FullName) `             | % {$_ -replace "($LeftDelimiterString)($ToBeReplacedString)($RightDelimiterString)", "`$1$ReplacingString`$3"} ` | Set-Content $file.FullName; } The script above just opens any SSIS package (.dtsx) in the supplied folder, then for each of them goes in search of the following text: Initial Catalog=AstarteToBeReplaced;Provider= and it replaces the text found with this: Initial Catalog=AstarteReplacing;Provider= I don’t enter into the details of each cmdlet used. I leave the reader to search for these details. Alternatively, you can use a specific object model exposed in some .NET assemblies provided by Integration Services, or you can use the Pacman utility: Enjoy! :) P.S. Using TFS as versioning system, before running the script I checked out the packages and, after the script executed succesfully, I checked in them.

  Read the article

• Predicting Likelihood of Click with Multiple Presentations

  - by Michel Adar

  When using predictive models to predict the likelihood of an ad or a banner to be clicked on it is common to ignore the fact that the same content may have been presented in the past to the same visitor. While the error may be small if the visitors do not often see repeated content, it may be very significant for sites where visitors come repeatedly. This is a well recognized problem that usually gets handled with presentation thresholds – do not present the same content more than 6 times. Observations and measurements of visitor behavior provide evidence that something better is needed. Observations For a specific visitor, during a single session, for a banner in a not too prominent space, the second presentation of the same content is more likely to be clicked on than the first presentation. The difference can be 30% to 100% higher likelihood for the second presentation when compared to the first. That is, for example, if the first presentation has an average click rate of 1%, the second presentation may have an average CTR of between 1.3% and 2%. After the second presentation the CTR stays more or less the same for a few more presentations. The number of presentations in this plateau seems to vary by the location of the content in the page and by the visual attraction of the content. After these few presentations the CTR starts decaying with a curve that is very well approximated by an exponential decay. For example, the 13th presentation may have 90% the likelihood of the 12th, and the 14th has 90% the likelihood of the 13th. The decay constant seems also to depend on the visibility of the content. Modeling Options Now that we know the empirical data, we can propose modeling techniques that will correctly predict the likelihood of a click. Use presentation number as an input to the predictive model Probably the most straight forward approach is to add the presentation number as an input to the predictive model. While this is certainly a simple solution, it carries with it several problems, among them: If the model learns on each case, repeated non-clicks for the same content will reinforce the belief of the model on the non-clicker disproportionately. That is, the weight of a person that does not click for 200 presentations of an offer may be the same as 100 other people that on average click on the second presentation. The effect of the presentation number is not a customer characteristic or a piece of contextual data about the interaction with the customer, but it is contextual data about the content presented. Models tend to underestimate the effect of the presentation number. For these reasons it is not advisable to use this approach when the average number of presentations of the same content to the same person is above 3, or when there are cases of having the presentation number be very large, in the tens or hundreds. Use presentation number as a partitioning attribute to the predictive model In this approach we essentially build a separate predictive model for each presentation number. This approach overcomes all of the problems in the previous approach, nevertheless, it can be applied only when the volume of data is large enough to have these very specific sub-models converge.

  Read the article

• Save the Date for Oracle’s 2015 JD Edwards Summit

  - by Catalin Teodor

  If you’re part of the JD Edwards community, you won’t want to miss our 6th annual JD Edwards Summit. Please save the date for this event in Broomfield, Colorado on Monday, February 2 through Thursday, February 5. Formal invitation and registration to come soon.We welcome the opportunity to hear from you regarding any specific topics you would like to see covered during this valuable exchange. Please send your ideas to Sheila Ebbitt at sheila.ebbitt-AT-oracle-DOT-com.Partners interested in sponsorship should contact Rene Chapman at rene.chapman-AT-oracle-DOT-com.

  Read the article

• How To Personalize the Windows Command Prompt

  - by Matthew Guay

  Command line interfaces can be downright boring, and always seem to miss out on the fresh coats of paint liberally applied to the rest of Windows.  Here’s how to add a splash of color to Command Prompt and make it unique. By default, Windows Command Prompt is white text on a black background. It get’s the job done, but maybe you want to add some color to it.   To get an overview of what we can do with the color command, let’s enter: color /? So, to get the color you want, enter color then the option for the background color followed by the font color.  For example, let’s make an old-fashioned green on black look by entering: color 02   There are a bunch of different combinations you can do, like this black background with red text. color 04 You can’t mess it up too much.  The color command won’t let you set both the font and the background to the same color, which would make it unreadable.  Also, if you want to get back to the default settings, just enter: color Now we’re back to plain-old black and white. Personalize Command Prompt Without Commands If you’d prefer to change the color without entering commands, just click on the Command Prompt icon in the top left corner of the window and select Properties. Select the Colors tab, and then choose the color you want for the screen text and background.  You can also enter your own RGB color combination if you want.   Here we entered the RGB values to get a purple background color like Ubuntu 10.04. Back in the Properties dialog, you can also change your Command Prompt font from the font tab.  Choose any font you want, as long as the one you want is one of the three listed here. Customizations you make via the Properties dialog are saved and will be used any time you open Command Prompt, but any customizations you make with the Color command are only for that session. Conclusion Whether you want to make your command prompt bright enough to cause a sunburn or old-style enough to scare a mainframe operator, with these settings, you can make Command Prompt a bit more unique.   Similar Articles Productive Geek Tips Use "Command Prompt Here" in Windows VistaVerify the Integrity of Windows Vista System FilesKeyboard Ninja: Scrolling the Windows Command Prompt With Only the KeyboardRun a Command as Administrator from the Windows 7 / Vista Run boxStart an Application Assigned to a Specific CPU in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app

  Read the article

• Run Your Tests With Any NUnit Version

  - by Alois Kraus

  I always thought that the NUnit test runners and the test assemblies need to reference the same NUnit.Framework version. I wanted to be able to run my test assemblies with the newest GUI runner (currently 2.5.3). Ok so all I need to do is to reference both NUnit versions the newest one and the official for the current project. There is a nice article form Kent Bogart online how to reference the same assembly multiple times with different versions. The magic works by referencing one NUnit assembly with an alias which does prefix all types inside it. Then I could decorate my tests with the TestFixture and Test attribute from both NUnit versions and everything worked fine except that this was ugly. After playing a little bit around to make it simpler I found that I did not need to reference both NUnit.Framework assemblies. The test runners do not require the TestFixture and Test attribute in their specific version. That is really neat since the test runners are instructed by attributes what to do in a declarative way there is really no need to tie the runners to a specific version. At its core NUnit has this little method hidden to find matching TestFixtures and Tests   public bool CanBuildFrom(Type type) {     if (!(!type.IsAbstract || type.IsSealed))     {         return false;     }     return (((Reflect.HasAttribute(type,           "NUnit.Framework.TestFixtureAttribute", true) ||               Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestAttribute"       , true)) ||               Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TestCaseAttribute"   , true)) ||               Reflect.HasMethodWithAttribute(type, "NUnit.Framework.TheoryAttribute"     , true)); } That is versioning and backwards compatibility at its best. I tell NUnit what to do by decorating my tests classes with NUnit Attributes and the runner executes my intent without the need to bind me to a specific version. The contract between NUnit versions is actually a bit more complex (think of AssertExceptions) but this is also handled nicely by using not the concrete type but simply to check for the catched exception type by string. What can we learn from this? Versioning can be easy if the contract is small and the users of your library use it in a declarative way (Attributes). Everything beyond it will force you to reference several versions of the same assembly with all its consequences. Type equality is lost between versions so none of your casts will work. That means that you cannot simply use IBigInterface in two versions. You will need a wrapper to call the correct versioned one. To get out of this mess you can use one (and only one) version agnostic driver to encapsulate your business logic from the concrete versions. This is of course more work but as NUnit shows it can be easy. Simplicity is therefore not a nice thing to have but also requirement number one if you intend to make things more complex in version two and want to support any version (older and newer). Any interaction model above easy will not be maintainable. There are different approached to versioning. Below are my own personal observations how versioning works within the  .NET Framwork and NUnit.   Versioning Models 1. Bug Fixing and New Isolated Features When you only need to fix bugs there is no need to break anything. This is especially true when you have a big API surface. Microsoft did this with the .NET Framework 3.0 which did leave the CLR as is but delivered new assemblies for the features WPF, WCF and Windows Workflow Foundations. Their basic model was that the .NET 2.0 assemblies were declared as red assemblies which must not change (well mostly but each change was carefully reviewed to minimize the risk of breaking changes as much as possible) whereas the new green assemblies of .NET 3,3.5 did not have such obligations since they did implement new unrelated features which did not have any impact on the red assemblies. This is versioning strategy aimed at maximum compatibility and the delivery of new unrelated features. If you have a big API surface you should strive hard to do the same or you will break your customers code with every release. 2. New Breaking Features There are times when really new things need to be added to an existing product. The .NET Framework 4.0 did change the CLR in many ways which caused subtle different behavior although the API´s remained largely unchanged. Sometimes it is possible to simply recompile an application to make it work (e.g. changed method signature void Func() –> bool Func()) but behavioral changes need much more thought and cannot be automated. To minimize the impact .NET 2.0,3.0,3.5 applications will not automatically use the .NET 4.0 runtime when installed but they will keep using the “old” one. What is interesting is that a side by side execution model of both CLR versions (2 and 4) within one process is possible. Key to success was total isolation. You will have 2 GCs, 2 JIT compilers, 2 finalizer threads within one process. The two .NET runtimes cannot talk  (except via the usual IPC mechanisms) to each other. Both runtimes share nothing and run independently within the same process. This enables Explorer plugins written for the CLR 2.0 to work even when a CLR 4 plugin is already running inside the Explorer process. The price for isolation is an increased memory footprint because everything is loaded and running two times.   3. New Non Breaking Features It really depends where you break things. NUnit has evolved and many different Assert, Expect… methods have been added. These changes are all localized in the NUnit.Framework assembly which can be easily extended. As long as the test execution contract (TestFixture, Test, AssertException) remains stable it is possible to write test executors which can run tests written for NUnit 10 because the execution contract has not changed. It is possible to write software which executes other components in a version independent way but this is only feasible if the interaction model is relatively simple.   Versioning software is hard and it looks like it will remain hard since you suddenly work in a severely constrained environment when you try to innovate and to keep everything backwards compatible at the same time. These are contradicting goals and do not play well together. The easiest way out of this is to carefully watch what your customers are doing with your software. Minimizing the impact is much easier when you do not need to guess how many people will be broken when this or that is removed.

  Read the article

• Sixeyed.Caching available now on NuGet and GitHub!

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/22/sixeyed.caching-available-now-on-nuget-and-github.aspxThe good guys at Pluralsight have okayed me to publish my caching framework (as seen in Caching in the .NET Stack: Inside-Out) as an open-source library, and it’s out now. You can get it here: Sixeyed.Caching source code on GitHub, and here: Sixeyed.Caching package v1.0.0 on NuGet. If you haven’t seen the course, there’s a preview here on YouTube: In-Process and Out-of-Process Caches, which gives a good flavour. The library is a wrapper around various cache providers, including the .NET MemoryCache, AppFabric cache, and  memcached*. All the wrappers inherit from a base class which gives you a set of common functionality against all the cache implementations: •    inherits OutputCacheProvider, so you can use your chosen cache provider as an ASP.NET output cache; •    serialization and encryption, so you can configure whether you want your cache items serialized (XML, JSON or binary) and encrypted; •    instrumentation, you can optionally use performance counters to monitor cache attempts and hits, at a low level. The framework wraps up different caches into an ICache interface, and it lets you use a provider directly like this: Cache.Memory.Get<RefData>(refDataKey); - or with configuration to use the default cache provider: Cache.Default.Get<RefData>(refDataKey); The library uses Unity’s interception framework to implement AOP caching, which you can use by flagging methods with the [Cache] attribute: [Cache] public RefData GetItem(string refDataKey) - and you can be more specific on the required cache behaviour: [Cache(CacheType=CacheType.Memory, Days=1] public RefData GetItem(string refDataKey) - or really specific: [Cache(CacheType=CacheType.Disk, SerializationFormat=SerializationFormat.Json, Hours=2, Minutes=59)] public RefData GetItem(string refDataKey) Provided you get instances of classes with cacheable methods from the container, the attributed method results will be cached, and repeated calls will be fetched from the cache. You can also set a bunch of cache defaults in application config, like whether to use encryption and instrumentation, and whether the cache system is enabled at all: <sixeyed.caching enabled="true"> <performanceCounters instrumentCacheTotalCounts="true" instrumentCacheTargetCounts="true" categoryNamePrefix ="Sixeyed.Caching.Tests"/> <encryption enabled="true" key="1234567890abcdef1234567890abcdef" iv="1234567890abcdef"/> <!-- key must be 32 characters, IV must be 16 characters--> </sixeyed.caching> For AOP and methods flagged with the cache attribute, you can override the compile-time cache settings at runtime with more config (keyed by the class and method name): <sixeyed.caching enabled="true"> <targets> <target keyPrefix="MethodLevelCachingStub.GetRandomIntCacheConfiguredInternal" enabled="false"/> <target keyPrefix="MethodLevelCachingStub.GetRandomIntCacheExpiresConfiguredInternal" seconds="1"/> </targets> It’s released under the MIT license, so you can use it freely in your own apps and modify as required. I’ll be adding more content to the GitHub wiki, which will be the main source of documentation, but for now there’s an FAQ to get you started. * - in the course the framework library also wraps NCache Express, but there's no public redistributable library that I can find, so it's not in Sixeyed.Caching.

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >