Search Results

Search found 20941 results on 838 pages for 'hard drive recovery'.

Page 183/838 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• How to write image of a floppy disk to a flash drive?

  - by Usman Ajmal

  I have created an image of a floppy disk by executing: dd if=/dev/fd0 of=/home/myFloppy.img My floppy disk is no more working now. So I am thinking now if it's possible to write the image of that floppy to a flash drive and then i may boot my machine from the flash drive. My machine's BIOS has the option of 'Boot from USB'.

  Read the article

• How do I restore to a delta file (disk) on Vmware ESXi

  - by Oscar

  Using VMware Server ESXi (freebie version) I have a Virtual Machine (win 2k3 r2 server). When I first provisioned it I took a snapshot of it. I recently tried to clone the primary drive using my standard hardware-based method to grow a windows disk. (using knoppix, clone drive to a new drive, make it bootable, then I intended to extend the partition via diskpart from within windows). This process failed; I tried setting the cloned drive (via the vmware gui) to replace the original drive, boot and be done. This didn't work out so well. The machine never booted. I checked the boot order, the disk location and all the basics I usually do. As a failsafe, I then tried changing all the settings back so the machine would boot to the original drive and I could figure out (as I eventually did) a better way of growing the disk. However when I powered on the machine with the original drive, it reverted back to that initial snapshot I created; It lost all the changes since. I looked in the file system and found a few files, I think the keyfile here is one named "delta" and I'm assuming that's the disk I want, but I can't find a way to have the Virtual Machine actually use that drive/file. It isn't available to add when I go to add an existing drive. Do I need to somehow commit that delta to the original drive and then boot from it again? Can you point me in the right direction? I've since discovered the proper way of growing drives using "vmkfstools" but I need to get back to the original state of the machine to try this out. Any help would be greatly appreciated.

  Read the article

• Moving files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to move it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public Update: Sorry, I actually mean "move" all the way... so it is not copy but move. So that's why I thought it should take 2, 3 seconds only.

  Read the article

• Any way to map WebDAV with SSL as network drive in Windows XP?

  - by Shadow

  I'm trying to map WebDAV with SSL as a network drive in Windows XP. (I've been at this for several hours) I can read the share just fine using a browser and with Network Places, but it refuses to mount as a network drive. I've tried it using the Windows explorer interface and net use. Net use with the \\server@ssl:443\webdav method gives System error 53. https://server/webdav gives error 67. Any help would be appreciated.

  Read the article

• Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

  - by Carl

  I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

  Read the article

• Copying files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to copy it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public

  Read the article

• Virtualbox for Mac OS X - using an external USB drive, which filesystem is ideal?

  - by bencnscp

  Assuming that I am NOT going to add NTFS drivers that allow read+write of NTFS partitions, I was wondering if the choice of filesystem when I partition an external USB drive matters. The choices appear to be HFS+ vs. FAT32. For the time being, I simply created two half-sized paritions, one of each type. :) I plan to run various versions of Windows, and keep the VirtualBox files on the external drive.

  Read the article

• DISK BOOT FAILURE after upgrading power supply

  - by Phenom

  After upgrading my power supply, I get the following error message when trying to boot into Windows 7. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER My Windows 7 installation is on a SATA hard drive. I'm able to fix this problem if I hook up my IDE hard drive, then it boots the SATA hard drive fine. I don't like this solution though because then that means my IDE hard drive is drawing power even though it isn't being used. Why would a newer power supply need the IDE hard drive hooked up just to boot into the SATA hard drive? There are no boot files on the IDE hard drive; it is completely empty. My old power supply did not need it hooked up in order to boot the SATA hard drive.

  Read the article

• How to move the files of a replicated database (SQL Server 2008 R2) to a different drive

  - by ileon

  I would appreciate if someone could help me with the following problem: We use two SQL Server 2008 R2 databases under transactional replication: transactional publication with updatable subscriptions. because we run out of disk space we need to move the database files into a new drive. But I don't want to break the replication. What I'm looking for are the required steps that will help me to move the files to the new drive. Thanks

  Read the article

• Why does compressing and decompressing my SSD hard drive free up space?

  - by Paperflyer

  I bought an SSD (SandForce 2), created a tiny 25GB partition on it for Windows and installed Windows 7 64-bit. In order to free disk space, I enabled compression on the drive using the Properties entry in the context menu for the drive in Explorer. Prior to compressing I had around 5GB of free space. After compression I had 4GB, so compression was not working for me. I figured this might have happened because of the built-in data compression of the SSD. I decompressed the files again - after decompression, it left me with 7GB of free space! Better yet, after restarting, I had 10GB. What is happening here?

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  What is the best file system to use for a second hard drive when dual booting between WinXP and Win7? I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• Partition and mount my secondary hard drive on CentOS 5.5 64bit?

  - by Andrew Fashion

  I am trying to prepare my second hard drive for user image uploads. Here is the current layout: # sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. I am assuming #4 is my secondary drive? How do I partition and mount it so I can begin using it? And how do I add to fstab? I understand if it's to many questions in one, just help me with whatever you can I guess :) Thank you for any help!

  Read the article

• Anyone tried boosting Windows performance by putting Swap File on a Flash drive?

  - by Clay Nichols

  Windows Vista introduced ReadyBoost which lets you use a Flash drive as a third (after RAM and HD) type of memory. It occurred to me that I could boost peformance on an old PC here w/ Win XP (32 bit, max'd at 4GB RAM) by putting it's swap file (page file) on a flash drive. (Now, before anyone comments: apparently Flash drives (10-30MB/s transfer rates) are slower than HDD (100+ MB/s) (I'm asking that as a separate question on this forum).

  Read the article

• Moving SQL Server databases from one drive to another?

  - by Michael Stum

  I have a SQL Server 2008 R2 on my machine which stores everything on the C: drive (C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA). I got an additional Hard Drive now and would like to move all the databases over. It's 26 databases, so I'd like to avoid manually disconnecting/reconnecting them. Ideally I would just like to move them from C: and D: and tell SQL Server to look there. Downtime is not an issue, I just don't want to do dozens of mouse clicks :)

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How do you do the offsite hard drive backups?

  - by kentchen

  I have been doing hard drive backups for a while, which I believe a lot of you guys do as well, but am having trouble figuring out a better way storing them offsite. I am wondering how you guys out there do that. Any policy or tips & tricks when it comes to offsite store your backups, mainly hard drives not tapes. Thanks in advance. [update] Thanks for mentioning the online backup. We are actually in the middle of this process. And I 100% agree that it's the ultimate way to go. However, considering the cost, sometimes it may not be the option, as it's a quite expensive option if you also consider the application level. I guess online backup can be a very good one in the separate topic. :)

  Read the article

• PC won't boot, even into bios

  - by divided

  Here's the deal: I cleaned a hard drive of some viruses (externally) and put it back into the original pc. This hard drive will boot in any other pc except the original pc. When I try other hard drives in the original pc, they are able to boot. The drive has Windows XP. What is the problem? How can I get this hard drive to work properly? The original hard drive works in other PCs. The PC boots with other hard drives acting as the master. If I boot with no hard drive, I still can't get into the BIOS These are all IDE hard drives The PC doesn't beep, it just boots into a black screen with a cursor blinking in the upper left of the screen

  Read the article

• How do I configure Gnome 3 so that it doesn't pop up a dialog for 'open with files' when I mount a drive?

  - by michael

  I am running Gnome 3 on Ubuntu 11.10. In the file manager, when I click a drive under 'Devices', Gnome 3 always pops up a dialog with the choices 'open with files' and 'eject' and then I need to click 'open with files' to get rid of that dialog. Is there a way to configure Gnome 3 not to do that? I am in file manager already, clicking a drive should show the content in the right pane. Why does it still ask me to 'open with files'?

  Read the article

• How can I boot a vm on Hyper-V 2012 when it has a virtual hard-drive missing?

  - by Zone12

  We have a Hyper-V 2012 server with 8 VM's on. We have attached extra virtual hard-drives to each of the computers to store backups on. These drives are stored on a NAS. After a power failure, we tried to boot the VM's and found that they couldn't be booted without the attached backup drives. We couldn't boot the NAS at that point and so we had to remove all the extra drives manually, boot the VM's and re-attach the drives at a later date when we got the NAS back up and running. These backup drives are non-essential to the running of the system. I would like to know if there is a way to boot a VM on Hyper-V 2012 with some of the hard-drives (scsi) missing so that we can recover automatically from a power failure.

  Read the article

• How to see compressed and actual size of files on a compressed drive?

  - by Phenom

  I'm using Windows 7 and installed a hard disk. When I formatted it I checked the option to enable file compression. I copied some files onto the hard drive. How can I see things like the compression ratio, and how much space the files actually take up?

  Read the article

• Can a virus attack my BIOS to disable the DVD drive?

  - by user636547

  A friend's laptop DVD drive is suddenly no longer detected. It's going to be difficult to walk him through going into the BIOS (he's not local). I wonder if it is even worthwhile i.e. whether the BIOS settings can be corrupted by a virus. Are BIOS settings formatted in a standard way such that a virus writer would know what to alter? FYI, he did reinstall the OS and the drive is still not detected.

  Read the article

• Why Virtualbox VDI doubles the space of the VM hard disk?

  - by logoff

  I have one Xubuntu 12.10 64 bit Virtualbox VM on a Windows 7 64 bit host. It has one dynamic allocated hard disk with VDI format with maximum capacity of 20GB. If I use a command df -h in the VM I get that 5.3GB are in use in th main partition. I have only 2 partitions, one for the ext4 hard disk and another with 512MB of swap. I have no snapshots. The VDI file of this VM has 10.7GB. It is normal this difference of space? It is caused because the VDI format?

  Read the article

• Is there a way I can find if my hard disk data was stolen? [closed]

  - by Bridget

  How can I tell if the repair shop stole my hard drive? I had my computer in the shop for a couple of days to get a diagnostic check and he quoted me $130. I have a family member who said he would do it for $30 so I rejected the offer and requested it back. When he returned it I hooked it back up and now I get a low disk space warning; when I dropped it off I had at least 50 gb of space left, on a total of 149 gb and all my pictures movies, and music are gone. Can I find if he indeed did steal my hard drive or something?

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >