Search Results

Search found 6136 results on 246 pages for 'quick and dirty'.

Page 183/246 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• mdadm lvm and ext4 slowness - How can I speed it up?

  - by beatbreaker

  I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

  Read the article

• What is the best time to set the IP address for a server headed to a server colocation facility?

  - by jim_m_somewhere

  What is the best time to set the IP address for a server? I have a server that I am going to install the OS on and then I am going to send it to a server colocation facility. The server is going to have Internet facing services (www, email, etc.) I can set up a "fake" IP address during install (by fake I mean private as in RFC 1918) and change the "fake" IPs to the real IPs once I set up the colocation service. The other option is to set up the colocation service...wait for them to give me the "real" IPs and use them during the OS install. The ramification are that...if I use "fake" IPs during install...I will have to wait before I set up things like SSL certs. If I wait for IPs from the colocation provider...then I can set up SSL certs that use the "correct" (as in "real") IP addresses...no changes to the certs until they expire. Do the "gotchas" of changing an IP address on a server outweigh the benefits of a quick install? The other danger with using "fake" IPs is that I could make a mistake when I go through the various files to change the IP address to the "live" IP address. Server OS: CentOS 6.2 or CentOS 6.3, 64 bit. Apps: Apache 2.4.X httpd, MySQL 5.X (will eventually use replication)

  Read the article

• Outlook 2010: Can I search Only My: Inbox, All Inbox Subfolders, and Specified Archive File Folders all at once

  - by JLH

  The setup is a user that has a laptop with Outlook 2010. We have Outlook hosted by Sherweb. The user that has a large number of emails (40,000) in a single Inbox subfolder. (I believe) Having such a large number of emails in an inox is slowing the users laptop down and I want to start moving old emails to a seperate pst file on a machine on our network. The problem I have is the user needs to be able to search all 40,000 emails. Right now he can can search do a search on the single subfolder. I would like to be able to move some of the emails to a seperate pst so I can compact the Inbox and still give them a 'one-click' search function that is still fairly quick. I don't think the 'Search All Outlook Items' is the soltuion because this will search all outlook folders -- sent items, other public folders. P.S. I'm not a expericenced outlook administrator, so there may be some assumptions in my questions that are wrong. I have no problem with somebody showing the error of my ways.

  Read the article

• I just deleted my backup file! How do I save it?

  - by Sammy

  I just accidentally deleted a backup file that I need to restore my system. It's an Acronis True Image TIB file. It was stored at H:\My backups and the name of the file was File_backup_2012-10-18.tib. I did a quick scan with Recuva 1.43.623 and it found the file using the recovery wizard, but it was unable to recover it. The "state" of the file is "unrecoverable". So the resulting file is 0 byte. I am trying to do a deep scan with Recuva right now but it takes a lot of time. If it should fail, what other recovery option do I have? Is there any other good file recovery software that's free to use for home users? I do have a second copy of the whole system partition, but I needed this file backup copy because it is more up to date. That's the file, right there! But why is Recuva unable to recover it?

  Read the article

• From Binary to Data Structures

  - by Cédric Menzi

  Table of Contents Introduction PE file format and COFF header COFF file header BaseCoffReader Byte4ByteCoffReader UnsafeCoffReader ManagedCoffReader Conclusion History This article is also available on CodeProject Introduction Sometimes, you want to parse well-formed binary data and bring it into your objects to do some dirty stuff with it. In the Windows world most data structures are stored in special binary format. Either we call a WinApi function or we want to read from special files like images, spool files, executables or may be the previously announced Outlook Personal Folders File. Most specifications for these files can be found on the MSDN Libarary: Open Specification In my example, we are going to get the COFF (Common Object File Format) file header from a PE (Portable Executable). The exact specification can be found here: PECOFF PE file format and COFF header Before we start we need to know how this file is formatted. The following figure shows an overview of the Microsoft PE executable format. Source: Microsoft Our goal is to get the PE header. As we can see, the image starts with a MS-DOS 2.0 header with is not important for us. From the documentation we can read "...After the MS DOS stub, at the file offset specified at offset 0x3c, is a 4-byte...". With this information we know our reader has to jump to location 0x3c and read the offset to the signature. The signature is always 4 bytes that ensures that the image is a PE file. The signature is: PE\0\0. To prove this we first seek to the offset 0x3c, read if the file consist the signature. So we need to declare some constants, because we do not want magic numbers.   private const int PeSignatureOffsetLocation = 0x3c; private const int PeSignatureSize = 4; private const string PeSignatureContent = "PE";   Then a method for moving the reader to the correct location to read the offset of signature. With this method we always move the underlining Stream of the BinaryReader to the start location of the PE signature.   private void SeekToPeSignature(BinaryReader br) { // seek to the offset for the PE signagure br.BaseStream.Seek(PeSignatureOffsetLocation, SeekOrigin.Begin); // read the offset int offsetToPeSig = br.ReadInt32(); // seek to the start of the PE signature br.BaseStream.Seek(offsetToPeSig, SeekOrigin.Begin); }   Now, we can check if it is a valid PE image by reading of the next 4 byte contains the content PE.   private bool IsValidPeSignature(BinaryReader br) { // read 4 bytes to get the PE signature byte[] peSigBytes = br.ReadBytes(PeSignatureSize); // convert it to a string and trim \0 at the end of the content string peContent = Encoding.Default.GetString(peSigBytes).TrimEnd('\0'); // check if PE is in the content return peContent.Equals(PeSignatureContent); }   With this basic functionality we have a good base reader class to try the different methods of parsing the COFF file header. COFF file header The COFF header has the following structure: Offset Size Field 0 2 Machine 2 2 NumberOfSections 4 4 TimeDateStamp 8 4 PointerToSymbolTable 12 4 NumberOfSymbols 16 2 SizeOfOptionalHeader 18 2 Characteristics If we translate this table to code, we get something like this:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public MachineType Machine; public ushort NumberOfSections; public uint TimeDateStamp; public uint PointerToSymbolTable; public uint NumberOfSymbols; public ushort SizeOfOptionalHeader; public Characteristic Characteristics; } BaseCoffReader All readers do the same thing, so we go to the patterns library in our head and see that Strategy pattern or Template method pattern is sticked out in the bookshelf. I have decided to take the template method pattern in this case, because the Parse() should handle the IO for all implementations and the concrete parsing should done in its derived classes.   public CoffHeader Parse() { using (var br = new BinaryReader(File.Open(_fileName, FileMode.Open, FileAccess.Read, FileShare.Read))) { SeekToPeSignature(br); if (!IsValidPeSignature(br)) { throw new BadImageFormatException(); } return ParseInternal(br); } } protected abstract CoffHeader ParseInternal(BinaryReader br);   First we open the BinaryReader, seek to the PE signature then we check if it contains a valid PE signature and rest is done by the derived implementations. Byte4ByteCoffReader The first solution is using the BinaryReader. It is the general way to get the data. We only need to know which order, which data-type and its size. If we read byte for byte we could comment out the first line in the CoffHeader structure, because we have control about the order of the member assignment.   protected override CoffHeader ParseInternal(BinaryReader br) { CoffHeader coff = new CoffHeader(); coff.Machine = (MachineType)br.ReadInt16(); coff.NumberOfSections = (ushort)br.ReadInt16(); coff.TimeDateStamp = br.ReadUInt32(); coff.PointerToSymbolTable = br.ReadUInt32(); coff.NumberOfSymbols = br.ReadUInt32(); coff.SizeOfOptionalHeader = (ushort)br.ReadInt16(); coff.Characteristics = (Characteristic)br.ReadInt16(); return coff; }   If the structure is as short as the COFF header here and the specification will never changed, there is probably no reason to change the strategy. But if a data-type will be changed, a new member will be added or ordering of member will be changed the maintenance costs of this method are very high. UnsafeCoffReader Another way to bring the data into this structure is using a "magically" unsafe trick. As above, we know the layout and order of the data structure. Now, we need the StructLayout attribute, because we have to ensure that the .NET Runtime allocates the structure in the same order as it is specified in the source code. We also need to enable "Allow unsafe code (/unsafe)" in the project's build properties. Then we need to add the following constructor to the CoffHeader structure.   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { unsafe { fixed (byte* packet = &data[0]) { this = *(CoffHeader*)packet; } } } }   The "magic" trick is in the statement: this = *(CoffHeader*)packet;. What happens here? We have a fixed size of data somewhere in the memory and because a struct in C# is a value-type, the assignment operator = copies the whole data of the structure and not only the reference. To fill the structure with data, we need to pass the data as bytes into the CoffHeader structure. This can be achieved by reading the exact size of the structure from the PE file.   protected override CoffHeader ParseInternal(BinaryReader br) { return new CoffHeader(br.ReadBytes(Marshal.SizeOf(typeof(CoffHeader)))); }   This solution is the fastest way to parse the data and bring it into the structure, but it is unsafe and it could introduce some security and stability risks. ManagedCoffReader In this solution we are using the same approach of the structure assignment as above. But we need to replace the unsafe part in the constructor with the following managed part:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { IntPtr coffPtr = IntPtr.Zero; try { int size = Marshal.SizeOf(typeof(CoffHeader)); coffPtr = Marshal.AllocHGlobal(size); Marshal.Copy(data, 0, coffPtr, size); this = (CoffHeader)Marshal.PtrToStructure(coffPtr, typeof(CoffHeader)); } finally { Marshal.FreeHGlobal(coffPtr); } } }     Conclusion We saw that we can parse well-formed binary data to our data structures using different approaches. The first is probably the clearest way, because we know each member and its size and ordering and we have control about the reading the data for each member. But if add member or the structure is going change by some reason, we need to change the reader. The two other solutions use the approach of the structure assignment. In the unsafe implementation we need to compile the project with the /unsafe option. We increase the performance, but we get some security risks.

  Read the article

• SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

  - by pinaldave

  TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Ajax Control Toolkit and Superexpert

  - by Stephen Walther

  Microsoft has asked my company, Superexpert Consulting, to take ownership of the development and maintenance of the Ajax Control Toolkit moving forward. In this blog entry, I discuss our strategy for improving the Ajax Control Toolkit. Why the Ajax Control Toolkit? The Ajax Control Toolkit is one of the most popular projects on CodePlex. In fact, some have argued that it is among the most successful open-source projects of all time. It consistently receives over 3,500 downloads a day (not weekends -- workdays). A mind-boggling number of developers use the Ajax Control Toolkit in their ASP.NET Web Forms applications. Why does the Ajax Control Toolkit continue to be such a popular project? The Ajax Control Toolkit fills a strong need in the ASP.NET Web Forms world. The Toolkit enables Web Forms developers to build richly interactive JavaScript applications without writing any JavaScript. For example, by taking advantage of the Ajax Control Toolkit, a Web Forms developer can add modal dialogs, popup calendars, and client tabs to a web application simply by dragging web controls onto a page. The Ajax Control Toolkit is not for everyone. If you are comfortable writing JavaScript then I recommend that you investigate using jQuery plugins instead of the Ajax Control Toolkit. However, if you are a Web Forms developer and you don’t want to get your hands dirty writing JavaScript, then the Ajax Control Toolkit is a great solution. The Ajax Control Toolkit is Vast The Ajax Control Toolkit consists of 40 controls. That’s a lot of controls (For the sake of comparison, jQuery UI consists of only 8 controls – those slackers J). Furthermore, developers expect the Ajax Control Toolkit to work on browsers both old and new. For example, people expect the Ajax Control Toolkit to work with Internet Explorer 6 and Internet Explorer 9 and every version of Internet Explorer in between. People also expect the Ajax Control Toolkit to work on the latest versions of Mozilla Firefox, Apple Safari, and Google Chrome. And, people expect the Ajax Control Toolkit to work with different operating systems. Yikes, that is a lot of combinations. The biggest challenge which my company faces in supporting the Ajax Control Toolkit is ensuring that the Ajax Control Toolkit works across all of these different browsers and operating systems. Testing, Testing, Testing Because we wanted to ensure that we could easily test the Ajax Control Toolkit with different browsers, the very first thing that we did was to set up a dedicated testing server. The dedicated server -- named Schizo -- hosts 4 virtual machines so that we can run Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, and Internet Explorer 9 at the same time (We also use the virtual machines to host the latest versions of Firefox, Chrome, Opera, and Safari). The five developers on our team (plus me) can each publish to a separate FTP website on the testing server. That way, we can quickly test how changes to the Ajax Control Toolkit affect different browsers. QUnit Tests for the Ajax Control Toolkit Introducing regressions – introducing new bugs when trying to fix existing bugs – is the concern which prevents me from sleeping well at night. There are so many people using the Ajax Control Toolkit in so many unique scenarios, that it is difficult to make improvements to the Ajax Control Toolkit without introducing regressions. In order to avoid regressions, we decided early on that it was extremely important to build good test coverage for the 40 controls in the Ajax Control Toolkit. We’ve been focusing a lot of energy on building automated JavaScript unit tests which we can use to help us discover regressions. We decided to write the unit tests with the QUnit test framework. We picked QUnit because it is quickly becoming the standard unit testing framework in the JavaScript world. For example, it is the unit testing framework used by the jQuery team, the jQuery UI team, and many jQuery UI plugin developers. We had to make several enhancements to the QUnit framework in order to test the Ajax Control Toolkit. For example, QUnit does not support tests which include postbacks. We modified the QUnit framework so that it works with IFrames so we could perform postbacks in our automated tests. At this point, we have written hundreds of QUnit tests. For example, we have written 135 QUnit tests for the Accordion control. The QUnit tests are included with the Ajax Control Toolkit source code in a project named AjaxControlToolkit.Tests. You can run all of the QUnit tests contained in the project by opening the Default.aspx page. Automating the QUnit Tests across Multiple Browsers Automated tests are useless if no one ever runs them. In order for the QUnit tests to be useful, we needed an easy way to run the tests automatically against a matrix of browsers. We wanted to run the unit tests against Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, Firefox, Chrome, and Safari automatically. Expecting a developer to run QUnit tests against every browser after every check-in is just too much to expect. It takes 20 seconds to run the Accordion QUnit tests. We are testing against 8 browsers. That would require the developer to open 8 browsers and wait for the results after each change in code. Too much work. Therefore, we built a JavaScript Test Server. Our JavaScript Test Server project was inspired by John Resig’s TestSwarm project. The JavaScript Test Server runs our QUnit tests in a swarm of browsers (running on different operating systems) automatically. Here’s how the JavaScript Test Server works: 1. We created an ASP.NET page named RunTest.aspx that constantly polls the JavaScript Test Server for a new set of QUnit tests to run. After the RunTest.aspx page runs the QUnit tests, the RunTest.aspx records the test results back to the JavaScript Test Server. 2. We opened the RunTest.aspx page on instances of Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, FireFox, Chrome, Opera, Google, and Safari. Now that we have the JavaScript Test Server setup, we can run all of our QUnit tests against all of the browsers which we need to support with a single click of a button. A New Release of the Ajax Control Toolkit Each Month The Ajax Control Toolkit Issue Tracker contains over one thousand five hundred open issues and feature requests. So we have plenty of work on our plates J At CodePlex, anyone can vote for an issue to be fixed. Originally, we planned to fix issues in order of their votes. However, we quickly discovered that this approach was inefficient. Constantly switching back and forth between different controls was too time-consuming. It takes time to re-familiarize yourself with a control. Instead, we decided to focus on two or three controls each month and really focus on fixing the issues with those controls. This way, we can fix sets of related issues and avoid the randomization caused by context switching. Our team works in monthly sprints. We plan to do another release of the Ajax Control Toolkit each and every month. So far, we have competed one release of the Ajax Control Toolkit which was released on April 1, 2011. We plan to release a new version in early May. Conclusion Fortunately, I work with a team of smart developers. We currently have 5 developers working on the Ajax Control Toolkit (not full-time, they are also building two very cool ASP.NET MVC applications). All the developers who work on our team are required to have strong JavaScript, jQuery, and ASP.NET MVC skills. In the interest of being as transparent as possible about our work on the Ajax Control Toolkit, I plan to blog frequently about our team’s ongoing work. In my next blog entry, I plan to write about the two Ajax Control Toolkit controls which are the focus of our work for next release.

  Read the article

• SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

  - by pinaldave

  TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Understanding Request Validation in ASP.NET MVC 3

  - by imran_ku07

       Introduction:             A fact that you must always remember "never ever trust user inputs". An application that trusts user inputs may be easily vulnerable to XSS, XSRF, SQL Injection, etc attacks. XSS and XSRF are very dangerous attacks. So to mitigate these attacks ASP.NET introduced request validation in ASP.NET 1.1. During request validation, ASP.NET will throw HttpRequestValidationException: 'A potentially dangerous XXX value was detected from the client', if he found, < followed by an exclamation(like <!) or < followed by the letters a through z(like <s) or & followed by a pound sign(like &#123) as a part of query string, posted form and cookie collection. In ASP.NET 4.0, request validation becomes extensible. This means that you can extend request validation. Also in ASP.NET 4.0, by default request validation is enabled before the BeginRequest phase of an HTTP request. ASP.NET MVC 3 moves one step further by making request validation granular. This allows you to disable request validation for some properties of a model while maintaining request validation for all other cases. In this article I will show you the use of request validation in ASP.NET MVC 3. Then I will briefly explain the internal working of granular request validation.       Description:             First of all create a new ASP.NET MVC 3 application. Then create a simple model class called MyModel,     public class MyModel { public string Prop1 { get; set; } public string Prop2 { get; set; } }             Then just update the index action method as follows,   public ActionResult Index(MyModel p) { return View(); }             Now just run this application. You will find that everything works just fine. Now just append this query string ?Prop1=<s to the url of this application, you will get the HttpRequestValidationException exception.           Now just decorate the Index action method with [ValidateInputAttribute(false)],   [ValidateInput(false)] public ActionResult Index(MyModel p) { return View(); }             Run this application again with same query string. You will find that your application run without any unhandled exception.           Up to now, there is nothing new in ASP.NET MVC 3 because ValidateInputAttribute was present in the previous versions of ASP.NET MVC. Any problem with this approach? Yes there is a problem with this approach. The problem is that now users can send html for both Prop1 and Prop2 properties and a lot of developers are not aware of it. This means that now everyone can send html with both parameters(e.g, ?Prop1=<s&Prop2=<s). So ValidateInput attribute does not gives you the guarantee that your application is safe to XSS or XSRF. This is the reason why ASP.NET MVC team introduced granular request validation in ASP.NET MVC 3. Let's see this feature.           Remove [ValidateInputAttribute(false)] on Index action and update MyModel class as follows,   public class MyModel { [AllowHtml] public string Prop1 { get; set; } public string Prop2 { get; set; } }             Note that AllowHtml attribute is only decorated on Prop1 property. Run this application again with ?Prop1=<s query string. You will find that your application run just fine. Run this application again with ?Prop1=<s&Prop2=<s query string, you will get HttpRequestValidationException exception. This shows that the granular request validation in ASP.NET MVC 3 only allows users to send html for properties decorated with AllowHtml attribute.            Sometimes you may need to access Request.QueryString or Request.Form directly. You may change your code as follows,   [ValidateInput(false)] public ActionResult Index() { var prop1 = Request.QueryString["Prop1"]; return View(); }             Run this application again, you will get the HttpRequestValidationException exception again even you have [ValidateInput(false)] on your Index action. The reason is that Request flags are still not set to unvalidate. I will explain this later. For making this work you need to use Unvalidated extension method,     public ActionResult Index() { var q = Request.Unvalidated().QueryString; var prop1 = q["Prop1"]; return View(); }             Unvalidated extension method is defined in System.Web.Helpers namespace . So you need to add using System.Web.Helpers; in this class file. Run this application again, your application run just fine.             There you have it. If you are not curious to know the internal working of granular request validation then you can skip next paragraphs completely. If you are interested then carry on reading.             Create a new ASP.NET MVC 2 application, then open global.asax.cs file and the following lines,     protected void Application_BeginRequest() { var q = Request.QueryString; }             Then make the Index action method as,    [ValidateInput(false)] public ActionResult Index(string id) { return View(); }             Please note that the Index action method contains a parameter and this action method is decorated with [ValidateInput(false)]. Run this application again, but now with ?id=<s query string, you will get HttpRequestValidationException exception at Application_BeginRequest method. Now just add the following entry in web.config,   <httpRuntime requestValidationMode="2.0"/>             Now run this application again. This time your application will run just fine. Now just see the following quote from ASP.NET 4 Breaking Changes,   In ASP.NET 4, by default, request validation is enabled for all requests, because it is enabled before the BeginRequest phase of an HTTP request. As a result, request validation applies to requests for all ASP.NET resources, not just .aspx page requests. This includes requests such as Web service calls and custom HTTP handlers. Request validation is also active when custom HTTP modules are reading the contents of an HTTP request.             This clearly state that request validation is enabled before the BeginRequest phase of an HTTP request. For understanding what does enabled means here, we need to see HttpRequest.ValidateInput, HttpRequest.QueryString and HttpRequest.Form methods/properties in System.Web assembly. Here is the implementation of HttpRequest.ValidateInput, HttpRequest.QueryString and HttpRequest.Form methods/properties in System.Web assembly,     public NameValueCollection Form { get { if (this._form == null) { this._form = new HttpValueCollection(); if (this._wr != null) { this.FillInFormCollection(); } this._form.MakeReadOnly(); } if (this._flags[2]) { this._flags.Clear(2); this.ValidateNameValueCollection(this._form, RequestValidationSource.Form); } return this._form; } } public NameValueCollection QueryString { get { if (this._queryString == null) { this._queryString = new HttpValueCollection(); if (this._wr != null) { this.FillInQueryStringCollection(); } this._queryString.MakeReadOnly(); } if (this._flags[1]) { this._flags.Clear(1); this.ValidateNameValueCollection(this._queryString, RequestValidationSource.QueryString); } return this._queryString; } } public void ValidateInput() { if (!this._flags[0x8000]) { this._flags.Set(0x8000); this._flags.Set(1); this._flags.Set(2); this._flags.Set(4); this._flags.Set(0x40); this._flags.Set(0x80); this._flags.Set(0x100); this._flags.Set(0x200); this._flags.Set(8); } }             The above code indicates that HttpRequest.QueryString and HttpRequest.Form will only validate the querystring and form collection if certain flags are set. These flags are automatically set if you call HttpRequest.ValidateInput method. Now run the above application again(don't forget to append ?id=<s query string in the url) with the same settings(i.e, requestValidationMode="2.0" setting in web.config and Application_BeginRequest method in global.asax.cs), your application will run just fine. Now just update the Application_BeginRequest method as,   protected void Application_BeginRequest() { Request.ValidateInput(); var q = Request.QueryString; }             Note that I am calling Request.ValidateInput method prior to use Request.QueryString property. ValidateInput method will internally set certain flags(discussed above). These flags will then tells the Request.QueryString (and Request.Form) property that validate the query string(or form) when user call Request.QueryString(or Request.Form) property. So running this application again with ?id=<s query string will throw HttpRequestValidationException exception. Now I hope it is clear to you that what does requestValidationMode do. It just tells the ASP.NET that not invoke the Request.ValidateInput method internally before the BeginRequest phase of an HTTP request if requestValidationMode is set to a value less than 4.0 in web.config. Here is the implementation of HttpRequest.ValidateInputIfRequiredByConfig method which will prove this statement(Don't be confused with HttpRequest and Request. Request is the property of HttpRequest class),    internal void ValidateInputIfRequiredByConfig() { ............................................................... ............................................................... ............................................................... ............................................................... if (httpRuntime.RequestValidationMode >= VersionUtil.Framework40) { this.ValidateInput(); } }              Hopefully the above discussion will clear you how requestValidationMode works in ASP.NET 4. It is also interesting to note that both HttpRequest.QueryString and HttpRequest.Form only throws the exception when you access them first time. Any subsequent access to HttpRequest.QueryString and HttpRequest.Form will not throw any exception. Continuing with the above example, just update Application_BeginRequest method in global.asax.cs file as,   protected void Application_BeginRequest() { try { var q = Request.QueryString; var f = Request.Form; } catch//swallow this exception { } var q1 = Request.QueryString; var f1 = Request.Form; }             Without setting requestValidationMode to 2.0 and without decorating ValidateInput attribute on Index action, your application will work just fine because both HttpRequest.QueryString and HttpRequest.Form will clear their flags after reading HttpRequest.QueryString and HttpRequest.Form for the first time(see the implementation of HttpRequest.QueryString and HttpRequest.Form above).           Now let's see ASP.NET MVC 3 granular request validation internal working. First of all we need to see type of HttpRequest.QueryString and HttpRequest.Form properties. Both HttpRequest.QueryString and HttpRequest.Form properties are of type NameValueCollection which is inherited from the NameObjectCollectionBase class. NameObjectCollectionBase class contains _entriesArray, _entriesTable, NameObjectEntry.Key and NameObjectEntry.Value fields which granular request validation uses internally. In addition granular request validation also uses _queryString, _form and _flags fields, ValidateString method and the Indexer of HttpRequest class. Let's see when and how granular request validation uses these fields.           Create a new ASP.NET MVC 3 application. Then put a breakpoint at Application_BeginRequest method and another breakpoint at HomeController.Index method. Now just run this application. When the break point inside Application_BeginRequest method hits then add the following expression in quick watch window, System.Web.HttpContext.Current.Request.QueryString. You will see the following screen,                                              Now Press F5 so that the second breakpoint inside HomeController.Index method hits. When the second breakpoint hits then add the following expression in quick watch window again, System.Web.HttpContext.Current.Request.QueryString. You will see the following screen,                            First screen shows that _entriesTable field is of type System.Collections.Hashtable and _entriesArray field is of type System.Collections.ArrayList during the BeginRequest phase of the HTTP request. While the second screen shows that _entriesTable type is changed to Microsoft.Web.Infrastructure.DynamicValidationHelper.LazilyValidatingHashtable and _entriesArray type is changed to Microsoft.Web.Infrastructure.DynamicValidationHelper.LazilyValidatingArrayList during executing the Index action method. In addition to these members, ASP.NET MVC 3 also perform some operation on _flags, _form, _queryString and other members of HttpRuntime class internally. This shows that ASP.NET MVC 3 performing some operation on the members of HttpRequest class for making granular request validation possible.           Both LazilyValidatingArrayList and LazilyValidatingHashtable classes are defined in the Microsoft.Web.Infrastructure assembly. You may wonder why their name starts with Lazily. The fact is that now with ASP.NET MVC 3, request validation will be performed lazily. In simple words, Microsoft.Web.Infrastructure assembly is now taking the responsibility for request validation from System.Web assembly. See the below screens. The first screen depicting HttpRequestValidationException exception in ASP.NET MVC 2 application while the second screen showing HttpRequestValidationException exception in ASP.NET MVC 3 application.   In MVC 2:                 In MVC 3:                          The stack trace of the second screenshot shows that Microsoft.Web.Infrastructure assembly (instead of System.Web assembly) is now performing request validation in ASP.NET MVC 3. Now you may ask: where Microsoft.Web.Infrastructure assembly is performing some operation on the members of HttpRequest class. There are at least two places where the Microsoft.Web.Infrastructure assembly performing some operation , Microsoft.Web.Infrastructure.DynamicValidationHelper.GranularValidationReflectionUtil.GetInstance method and Microsoft.Web.Infrastructure.DynamicValidationHelper.ValidationUtility.CollectionReplacer.ReplaceCollection method, Here is the implementation of these methods,   private static GranularValidationReflectionUtil GetInstance() { try { if (DynamicValidationShimReflectionUtil.Instance != null) { return null; } GranularValidationReflectionUtil util = new GranularValidationReflectionUtil(); Type containingType = typeof(NameObjectCollectionBase); string fieldName = "_entriesArray"; bool isStatic = false; Type fieldType = typeof(ArrayList); FieldInfo fieldInfo = CommonReflectionUtil.FindField(containingType, fieldName, isStatic, fieldType); util._del_get_NameObjectCollectionBase_entriesArray = MakeFieldGetterFunc<NameObjectCollectionBase, ArrayList>(fieldInfo); util._del_set_NameObjectCollectionBase_entriesArray = MakeFieldSetterFunc<NameObjectCollectionBase, ArrayList>(fieldInfo); Type type6 = typeof(NameObjectCollectionBase); string str2 = "_entriesTable"; bool flag2 = false; Type type7 = typeof(Hashtable); FieldInfo info2 = CommonReflectionUtil.FindField(type6, str2, flag2, type7); util._del_get_NameObjectCollectionBase_entriesTable = MakeFieldGetterFunc<NameObjectCollectionBase, Hashtable>(info2); util._del_set_NameObjectCollectionBase_entriesTable = MakeFieldSetterFunc<NameObjectCollectionBase, Hashtable>(info2); Type targetType = CommonAssemblies.System.GetType("System.Collections.Specialized.NameObjectCollectionBase+NameObjectEntry"); Type type8 = targetType; string str3 = "Key"; bool flag3 = false; Type type9 = typeof(string); FieldInfo info3 = CommonReflectionUtil.FindField(type8, str3, flag3, type9); util._del_get_NameObjectEntry_Key = MakeFieldGetterFunc<string>(targetType, info3); Type type10 = targetType; string str4 = "Value"; bool flag4 = false; Type type11 = typeof(object); FieldInfo info4 = CommonReflectionUtil.FindField(type10, str4, flag4, type11); util._del_get_NameObjectEntry_Value = MakeFieldGetterFunc<object>(targetType, info4); util._del_set_NameObjectEntry_Value = MakeFieldSetterFunc(targetType, info4); Type type12 = typeof(HttpRequest); string methodName = "ValidateString"; bool flag5 = false; Type[] argumentTypes = new Type[] { typeof(string), typeof(string), typeof(RequestValidationSource) }; Type returnType = typeof(void); MethodInfo methodInfo = CommonReflectionUtil.FindMethod(type12, methodName, flag5, argumentTypes, returnType); util._del_validateStringCallback = CommonReflectionUtil.MakeFastCreateDelegate<HttpRequest, ValidateStringCallback>(methodInfo); Type type = CommonAssemblies.SystemWeb.GetType("System.Web.HttpValueCollection"); util._del_HttpValueCollection_ctor = CommonReflectionUtil.MakeFastNewObject<Func<NameValueCollection>>(type); Type type14 = typeof(HttpRequest); string str6 = "_form"; bool flag6 = false; Type type15 = type; FieldInfo info6 = CommonReflectionUtil.FindField(type14, str6, flag6, type15); util._del_get_HttpRequest_form = MakeFieldGetterFunc<HttpRequest, NameValueCollection>(info6); util._del_set_HttpRequest_form = MakeFieldSetterFunc(typeof(HttpRequest), info6); Type type16 = typeof(HttpRequest); string str7 = "_queryString"; bool flag7 = false; Type type17 = type; FieldInfo info7 = CommonReflectionUtil.FindField(type16, str7, flag7, type17); util._del_get_HttpRequest_queryString = MakeFieldGetterFunc<HttpRequest, NameValueCollection>(info7); util._del_set_HttpRequest_queryString = MakeFieldSetterFunc(typeof(HttpRequest), info7); Type type3 = CommonAssemblies.SystemWeb.GetType("System.Web.Util.SimpleBitVector32"); Type type18 = typeof(HttpRequest); string str8 = "_flags"; bool flag8 = false; Type type19 = type3; FieldInfo flagsFieldInfo = CommonReflectionUtil.FindField(type18, str8, flag8, type19); Type type20 = type3; string str9 = "get_Item"; bool flag9 = false; Type[] typeArray4 = new Type[] { typeof(int) }; Type type21 = typeof(bool); MethodInfo itemGetter = CommonReflectionUtil.FindMethod(type20, str9, flag9, typeArray4, type21); Type type22 = type3; string str10 = "set_Item"; bool flag10 = false; Type[] typeArray6 = new Type[] { typeof(int), typeof(bool) }; Type type23 = typeof(void); MethodInfo itemSetter = CommonReflectionUtil.FindMethod(type22, str10, flag10, typeArray6, type23); MakeRequestValidationFlagsAccessors(flagsFieldInfo, itemGetter, itemSetter, out util._del_BitVector32_get_Item, out util._del_BitVector32_set_Item); return util; } catch { return null; } } private static void ReplaceCollection(HttpContext context, FieldAccessor<NameValueCollection> fieldAccessor, Func<NameValueCollection> propertyAccessor, Action<NameValueCollection> storeInUnvalidatedCollection, RequestValidationSource validationSource, ValidationSourceFlag validationSourceFlag) { NameValueCollection originalBackingCollection; ValidateStringCallback validateString; SimpleValidateStringCallback simpleValidateString; Func<NameValueCollection> getActualCollection; Action<NameValueCollection> makeCollectionLazy; HttpRequest request = context.Request; Func<bool> getValidationFlag = delegate { return _reflectionUtil.GetRequestValidationFlag(request, validationSourceFlag); }; Func<bool> func = delegate { return !getValidationFlag(); }; Action<bool> setValidationFlag = delegate (bool value) { _reflectionUtil.SetRequestValidationFlag(request, validationSourceFlag, value); }; if ((fieldAccessor.Value != null) && func()) { storeInUnvalidatedCollection(fieldAccessor.Value); } else { originalBackingCollection = fieldAccessor.Value; validateString = _reflectionUtil.MakeValidateStringCallback(context.Request); simpleValidateString = delegate (string value, string key) { if (((key == null) || !key.StartsWith("__", StringComparison.Ordinal)) && !string.IsNullOrEmpty(value)) { validateString(value, key, validationSource); } }; getActualCollection = delegate { fieldAccessor.Value = originalBackingCollection; bool flag = getValidationFlag(); setValidationFlag(false); NameValueCollection col = propertyAccessor(); setValidationFlag(flag); storeInUnvalidatedCollection(new NameValueCollection(col)); return col; }; makeCollectionLazy = delegate (NameValueCollection col) { simpleValidateString(col[null], null); LazilyValidatingArrayList array = new LazilyValidatingArrayList(_reflectionUtil.GetNameObjectCollectionEntriesArray(col), simpleValidateString); _reflectionUtil.SetNameObjectCollectionEntriesArray(col, array); LazilyValidatingHashtable table = new LazilyValidatingHashtable(_reflectionUtil.GetNameObjectCollectionEntriesTable(col), simpleValidateString); _reflectionUtil.SetNameObjectCollectionEntriesTable(col, table); }; Func<bool> hasValidationFired = func; Action disableValidation = delegate { setValidationFlag(false); }; Func<int> fillInActualFormContents = delegate { NameValueCollection values = getActualCollection(); makeCollectionLazy(values); return values.Count; }; DeferredCountArrayList list = new DeferredCountArrayList(hasValidationFired, disableValidation, fillInActualFormContents); NameValueCollection target = _reflectionUtil.NewHttpValueCollection(); _reflectionUtil.SetNameObjectCollectionEntriesArray(target, list); fieldAccessor.Value = target; } }             Hopefully the above code will help you to understand the internal working of granular request validation. It is also important to note that Microsoft.Web.Infrastructure assembly invokes HttpRequest.ValidateInput method internally. For further understanding please see Microsoft.Web.Infrastructure assembly code. Finally you may ask: at which stage ASP NET MVC 3 will invoke these methods. You will find this answer by looking at the following method source,   Unvalidated extension method for HttpRequest class defined in System.Web.Helpers.Validation class. System.Web.Mvc.MvcHandler.ProcessRequestInit method. System.Web.Mvc.ControllerActionInvoker.ValidateRequest method. System.Web.WebPages.WebPageHttpHandler.ProcessRequestInternal method.       Summary:             ASP.NET helps in preventing XSS attack using a feature called request validation. In this article, I showed you how you can use granular request validation in ASP.NET MVC 3. I explain you the internal working of  granular request validation. Hope you will enjoy this article too.   SyntaxHighlighter.all()

  Read the article

• Hey, Google: It’s Time to Add Multi-Window Multitasking To Android

  - by Chris Hoffman

  In 2012, Google’s Dianne Hackborn threatened to revoke CyanogenMod’s access to the Android Market if they moved forward with adding “Cornerstone” multitasking to their custom ROM. Samsung has since created their own multi-window multitasking feature. Dianne Hackborn said this “is something that needs to be done at the mainline platform level” so apps wouldn’t break. She was right — Android needs this as a standard feature and it’s time for Google to provide it. Doesn’t Android Have Multitasking? Android originally stood out from Apple’s iOS with its powerful multitasking. Applications can continue running in the background while you’re using another application. This makes Android powerful — you can even have BitTorrent clients downloading files in the background while using another app. Android still kept the design of a single app on screen at a time. This made a lot of sense when Android only ran on smartphones with small screens. Today, Android runs on everything from smaller smartphones all the way up to huge “phablets” like the Galaxy Note. Android has gone beyond phones and runs on 12-inch tablets, convertibles with keyboard docks, laptops, and even Android desktops. Android isn’t just a phone operating system. Samsung’s Multi-Window Isn’t Good Enough Samsung has tried to add value to Android by adding a multi-window feature. When you’re using a high-end phone like the Galaxy Note or Galaxy S, or a Galaxy tablet, you have the ability to run certain apps side-by-side with each other. There are big problems here. This only works on Samsung devices, and only on specific Samsung devices. To add support for this feature in a way that doesn’t break other apps, Samsung’s multi-window feature also only works with specific apps. You can’t just run any app in multi-window view, only the apps on the Multi Window bar Samsung provides. This prevents third-party apps from breaking, which is what Google was worried about with CyanogenMod’s Cornerstone feature. A feature that only works with a handful of apps on specific devices from a single manufacturer isn’t good enough. This feature needs to work on every Android device — or at least ones with suitably large screens and powerful enough internals. It needs to be an Android platform feature so application developers can ensure their apps will work properly with it on every device. Android developers shouldn’t have to add support for each manufacturer’s own multi-window feature if other manufacturers decide to copy Samsung. Floating Apps Are a Dirty Hack Floating apps also enable real multitasking. Remember that Android allows apps to run in the background while you’re using an app in the foreground. These apps can present interfaces that appear floating above the current app — think of it like using “always on top” to make a window always appear over every other app on a desktop operating system. You can install floating apps to browse the web, take notes, chat, and watch videos while using any app. Only apps specifically designed to run as floating apps will work, so you have to seek them out. Floating apps are also awkward to use because they float over the app you’re using, blocking parts of its interface. Microsoft added floating-window support to Skype for Android. You can have a video conversation and the other person’s face will always appear on your screen, even when you leave the Skype app. Microsoft is using more of Android’s multi-window multitasking power than Google is. Custom ROMs and Root-Only Tweaks Aren’t Acceptable Some custom ROMs are adding this feature to Android. Google threatened to revoke CyanogenMod’s access to the Android Market (now known as Google Play) if they added this feature because it could potentially break third-party apps. Today, other custom ROMs are working on split-screen multitasking. Samsung added their own version to their own devices. You can also get this feature by using a root-only Xposed Framework tweak known as XMultiWindow. If you have root access, you can get multi-window multitasking or any app on your device. This shouldn’t require rooting your device or installing a custom ROM. These third-party solutions often have awkward interfaces and bugs. We need an integrated, supported solution that works the same on every device. Why Multi-Window is Important Microsoft’s Windows 8.1 stands out among tablet operating systems for its powerful multitasking support, allowing you to view several apps side-by-side at the same time. Apple is also reported to be working on adding side-by-side apps to the iPad with iOS 8. On every competitor’s operating system, you’ll be able to view a web page while you write an email, watch a video while you browse the web, or chat with someone while you do anything else. But Android’s still remained frozen in time. Despite all Android’s underlying power — and despite the way Android allows apps to adapt to different screen sizes — Google is resisting adding this feature. Large-screen Android tablets like the Nexus 10 (remember that tablet Google hasn’t updated in over 18 months?) need this feature. So do huge phones, convertibles, laptops, and Android desktops. If tablets are the future of personal computing, we should be able to do more than one thing at a time on our tablets’ big screens. Microsoft, Samsung, and even Apple are realizing this — now it’s Google’s turn. Image Credit: Sergey Galyonkin on Flickr, Karlis Dambrans on Flickr

  Read the article

• TFS, G.I. Joe and Under-doing

  If I were to rank the most consistently irritating parts of my work day, using TFS would come in first by a wide margin. Even repeated network outages this week seem like a pleasant reprieve from this monolithic beast. This is not a reflexive anti-Microsoft feeling, that attitude just wouldnt work for a consultant who does .NET development. It is also not an utter dismissal of TFS as worthless; Ive seen people use it effectively on several projects. So why? Ill start with a laundry list of shortcomings. An out of the box UI for work items that is insultingly bad, a source control system that is confoundingly fragile when handling merges, folder renames and long file names, the arcane XML wizardry necessary to customize a template and a build system that adds an extra layer of oddness on top of msbuild. Im sure my legion of readers will soon point out to me how I can work around all these issues, how this is fixed in TFS 2010 or with this add-in, and how once you have everything set up, youre fine. And theyd be right, any one of these problems could be worked around. If not dirty laundry, what else? I thought about it for a while, and came to the conclusion that TFS is so irritating to me because it represents a vision of software development that I find unappealing. To expand upon this, lets start with some wisdom from those great PSAs at the end of the G.I. Joe cartoons of the 80s: Now you know, and knowing is half the battle. In software development, Id go further and say knowing is more than half the battle. Understanding the dimensions of the problem you are trying to solve, the needs of the users, the value that your software can provide are more than half the battle. Implementation of this understanding is not easy, but it is not even possible without this knowledge. Assuming we have a fixed amount of time and mental energy for any project, why does this spell trouble for TFS? If you think about what TFS is doing, its offering you a huge array of options to track the day to day implementation of your project. From tasks, to code churn, to test coverage. All valuable metrics, but only in exchange for valuable time to get it all working. In addition, when you have a shiny toy like TFS, the temptation is to feel obligated to use it. So the push from TFS is to encourage a project manager and team to focus on process and metrics around process. You can get great visibility, and graphs to show your project stakeholders, but none of that is important if you are not implementing the right product. Not just unimportant, these activities can be harmful as they drain your time and sap your creativity away from the rest of the project. To be more concrete, lets suppose your organization has invested the time to create a template for your projects and trained people in how to use it, so there is no longer a big investment of time for each project to get up and running. First, Id challenge if that template could be specific enough to be full featured and still applicable for any project. Second, the very existence of this template would be a indication to a project manager that the success of their project was somehow directly related to fitting management of that project into this format. Again, while the capabilities are wonderful, the mirage is there; just get everything into TFS and your project will run smoothly. Ill close the loop on this first topic by proposing a thought experiment. Think of the projects youve worked on. How many times have you been chagrined to discover youve implemented the wrong feature, misunderstood how a feature should work or just plain spent too much time on a screen that nobody uses? That sounds like a really worthwhile area to invest time in improving. How about going back to these projects and thinking about how many times you wished you had optimized the state change flow of your tasks or been embarrassed to not have a code churn report linked back to the latest changeset? With thanks to the Real American Heroes, Ill move on to a more current influence, that of the developers at 37signals, and their philosophy towards software development. This philosophy, fully detailed in the books Getting Real and Rework, is a vision of software that under does the competition. This is software that is deliberately limited in functionality in order to concentrate fully on making sure ever feature that is there is awesome and needed. Why is this relevant? Well, in one of those fun seeming paradoxes in life, constraints can be a spark for creativity. Think Twitter, the small screen of an iPhone, the limitations of HTML for applications, the low memory limits of older or embedded system. As long as there is some freedom within those constraints, amazing things emerge. For project management, some of the most respected people in the industry recommend using just index cards, pens and tape. They argue that with change the constant in software development, your process should be as limited (yet rigorous) as possible. Looking at TFS, this is not a system designed to under do anybody. It is a big jumble of components and options, with every feature you could think of. Predictably this means many basic functions are hard to use. For task management, many people just use an Excel spreadsheet linked up to TFS. Not a stirring endorsement of the tooling there. TFS as a whole would be far more appealing to me if there was less of it, but better. Id cut 50% of the features to make the other half really amaze and inspire me. And thats really the heart of the matter. TFS has great promise and I want to believe it can work better. But ultimately it focuses your attention on a lot of stuff that doesnt really matter and then clamps down your creativity in a mess of forms and dialogs obscuring what does.   --- Relevant Links --- All those great G.I. Joe PSAs are on YouTube, including lots of mashed up versions. A simple Google search will get you on the right track.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• [GEEK SCHOOL] Network Security 4: Windows Firewall: Your System’s Best Defense

  - by Ciprian Rusen

  If you have your computer connected to a network, or directly to your Internet connection, then having a firewall is an absolute necessity. In this lesson we will discuss the Windows Firewall – one of the best security features available in Windows! The Windows Firewall made its debut in Windows XP. Prior to that, Windows system needed to rely on third-party solutions or dedicated hardware to protect them from network-based attacks. Over the years, Microsoft has done a great job with it and it is one of the best firewalls you will ever find for Windows operating systems. Seriously, it is so good that some commercial vendors have decided to piggyback on it! Let’s talk about what you will learn in this lesson. First, you will learn about what the Windows Firewall is, what it does, and how it works. Afterward, you will start to get your hands dirty and edit the list of apps, programs, and features that are allowed to communicate through the Windows Firewall depending on the type of network you are connected to. Moving on from there, you will learn how to add new apps or programs to the list of allowed items and how to remove the apps and programs that you want to block. Last but not least, you will learn how to enable or disable the Windows Firewall, for only one type of networks or for all network connections. By the end of this lesson, you should know enough about the Windows Firewall to use and manage it effectively. What is the Windows Firewall? Windows Firewall is an important security application that’s built into Windows. One of its roles is to block unauthorized access to your computer. The second role is to permit authorized data communications to and from your computer. Windows Firewall does these things with the help of rules and exceptions that are applied both to inbound and outbound traffic. They are applied depending on the type of network you are connected to and the location you have set for it in Windows, when connecting to the network. Based on your choice, the Windows Firewall automatically adjusts the rules and exceptions applied to that network. This makes the Windows Firewall a product that’s silent and easy to use. It bothers you only when it doesn’t have any rules and exceptions for what you are trying to do or what the programs running on your computer are trying to do. If you need a refresher on the concept of network locations, we recommend you to read our How-To Geek School class on Windows Networking. Another benefit of the Windows Firewall is that it is so tightly and nicely integrated into Windows and all its networking features, that some commercial vendors decided to piggyback onto it and use it in their security products. For example, products from companies like Trend Micro or F-Secure no longer provide their proprietary firewall modules but use the Windows Firewall instead. Except for a few wording differences, the Windows Firewall works the same in Windows 7 and Windows 8.x. The only notable difference is that in Windows 8.x you will see the word “app” being used instead of “program”. Where to Find the Windows Firewall By default, the Windows Firewall is turned on and you don’t need to do anything special in order for it work. You will see it displaying some prompts once in a while but they show up so rarely that you might forget that is even working. If you want to access it and configure the way it works, go to the Control Panel, then go to “System and Security” and select “Windows Firewall”. Now you will see the Windows Firewall window where you can get a quick glimpse on whether it is turned on and the type of network you are connected to: private networks or public network. For the network type that you are connected to, you will see additional information like: The state of the Windows Firewall How the Windows Firewall deals with incoming connections The active network When the Windows Firewall will notify you You can easily expand the other section and view the default settings that apply when connecting to networks of that type. If you have installed a third-party security application that also includes a firewall module, chances are that the Windows Firewall has been disabled, in order to avoid performance issues and conflicts between the two security products. If that is the case for your computer or device, you won’t be able to view any information in the Windows Firewall window and you won’t be able to configure the way it works. Instead, you will see a warning that says: “These settings are being managed by vendor application – Application Name”. In the screenshot below you can see an example of how this looks. How to Allow Desktop Applications Through the Windows Firewall Windows Firewall has a very comprehensive set of rules and most Windows programs that you install add their own exceptions to the Windows Firewall so that they receive network and Internet access. This means that you will see prompts from the Windows Firewall on occasion, generally when you install programs that do not add their own exceptions to the Windows Firewall’s list. In a Windows Firewall prompt, you are asked to select the network locations to which you allow access for that program: private networks or public networks. By default, Windows Firewall selects the checkbox that’s appropriate for the network you are currently using. You can decide to allow access for both types of network locations or just to one of them. To apply your setting press “Allow access”. If you want to block network access for that program, press “Cancel” and the program will be set as blocked for both network locations. At this step you should note that only administrators can set exceptions in the Windows Firewall. If you are using a standard account without administrator permissions, the programs that do not comply with the Windows Firewall rules and exceptions are automatically blocked, without any prompts being shown. You should note that in Windows 8.x you will never see any Windows Firewall prompts related to apps from the Windows Store. They are automatically given access to the network and the Internet based on the assumption that you are aware of the permissions they require based on the information displayed by the Windows Store. Windows Firewall rules and exceptions are automatically created for each app that you install from the Windows Store. However, you can easily block access to the network and the Internet for any app, using the instructions in the next section. How to Customize the Rules for Allowed Apps Windows Firewall allows any user with an administrator account to change the list of rules and exceptions applied for apps and desktop programs. In order to do this, first start the Windows Firewall. On the column on the left, click or tap “Allow an app or feature through Windows Firewall” (in Windows 8.x) or “Allow a program or feature through Windows Firewall” (in Windows 7). Now you see the list of apps and programs that are allowed to communicate through the Windows Firewall. At this point, the list is grayed out and you can only view which apps, features, and programs have rules that are enabled in the Windows Firewall.

  Read the article

• Using HTML 5 SessionState to save rendered Page Content

  - by Rick Strahl

  HTML 5 SessionState and LocalStorage are very useful and super easy to use to manage client side state. For building rich client side or SPA style applications it's a vital feature to be able to cache user data as well as HTML content in order to swap pages in and out of the browser's DOM. What might not be so obvious is that you can also use the sessionState and localStorage objects even in classic server rendered HTML applications to provide caching features between pages. These APIs have been around for a long time and are supported by most relatively modern browsers and even all the way back to IE8, so you can use them safely in your Web applications. SessionState and LocalStorage are easy The APIs that make up sessionState and localStorage are very simple. Both object feature the same API interface which  is a simple, string based key value store that has getItem, setItem, removeitem, clear and  key methods. The objects are also pseudo array objects and so can be iterated like an array with  a length property and you have array indexers to set and get values with. Basic usage  for storing and retrieval looks like this (using sessionStorage, but the syntax is the same for localStorage - just switch the objects):// set var lastAccess = new Date().getTime(); if (sessionStorage) sessionStorage.setItem("myapp_time", lastAccess.toString()); // retrieve in another page or on a refresh var time = null; if (sessionStorage) time = sessionStorage.getItem("myapp_time"); if (time) time = new Date(time * 1); else time = new Date(); sessionState stores data that is browser session specific and that has a liftetime of the active browser session or window. Shut down the browser or tab and the storage goes away. localStorage uses the same API interface, but the lifetime of the data is permanently stored in the browsers storage area until deleted via code or by clearing out browser cookies (not the cache). Both sessionStorage and localStorage space is limited. The spec is ambiguous about this - supposedly sessionStorage should allow for unlimited size, but it appears that most WebKit browsers support only 2.5mb for either object. This means you have to be careful what you store especially since other applications might be running on the same domain and also use the storage mechanisms. That said 2.5mb worth of character data is quite a bit and would go a long way. The easiest way to get a feel for how sessionState and localStorage work is to look at a simple example. You can go check out the following example online in Plunker: http://plnkr.co/edit/0ICotzkoPjHaWa70GlRZ?p=preview which looks like this: Plunker is an online HTML/JavaScript editor that lets you write and run Javascript code and similar to JsFiddle, but a bit cleaner to work in IMHO (thanks to John Papa for turning me on to it). The sample has two text boxes with counts that update session/local storage every time you click the related button. The counts are 'cached' in Session and Local storage. The point of these examples is that both counters survive full page reloads, and the LocalStorage counter survives a complete browser shutdown and restart. Go ahead and try it out by clicking the Reload button after updating both counters and then shutting down the browser completely and going back to the same URL (with the same browser). What you should see is that reloads leave both counters intact at the counted values, while a browser restart will leave only the local storage counter intact. The code to deal with the SessionStorage (and LocalStorage not shown here) in the example is isolated into a couple of wrapper methods to simplify the code: function getSessionCount() { var count = 0; if (sessionStorage) { var count = sessionStorage.getItem("ss_count"); count = !count ? 0 : count * 1; } $("#txtSession").val(count); return count; } function setSessionCount(count) { if (sessionStorage) sessionStorage.setItem("ss_count", count.toString()); } These two functions essentially load and store a session counter value. The two key methods used here are: sessionStorage.getItem(key); sessionStorage.setItem(key,stringVal); Note that the value given to setItem and return by getItem has to be a string. If you pass another type you get an error. Don't let that limit you though - you can easily enough store JSON data in a variable so it's quite possible to pass complex objects and store them into a single sessionStorage value:var user = { name: "Rick", id="ricks", level=8 } sessionStorage.setItem("app_user",JSON.stringify(user)); to retrieve it:var user = sessionStorage.getItem("app_user"); if (user) user = JSON.parse(user); Simple! If you're using the Chrome Developer Tools (F12) you can also check out the session and local storage state on the Resource tab:   You can also use this tool to refresh or remove entries from storage. What we just looked at is a purely client side implementation where a couple of counters are stored. For rich client centric AJAX applications sessionStorage and localStorage provide a very nice and simple API to store application state while the application is running. But you can also use these storage mechanisms to manage server centric HTML applications when you combine server rendering with some JavaScript to perform client side data caching. You can both store some state information and data on the client (ie. store a JSON object and carry it forth between server rendered HTML requests) or you can use it for good old HTTP based caching where some rendered HTML is saved and then restored later. Let's look at the latter with a real life example. Why do I need Client-side Page Caching for Server Rendered HTML? I don't know about you, but in a lot of my existing server driven applications I have lists that display a fair amount of data. Typically these lists contain links to then drill down into more specific data either for viewing or editing. You can then click on a link and go off to a detail page that provides more concise content. So far so good. But now you're done with the detail page and need to get back to the list, so you click on a 'bread crumbs trail' or an application level 'back to list' button and… …you end up back at the top of the list - the scroll position, the current selection in some cases even filters conditions - all gone with the wind. You've left behind the state of the list and are starting from scratch in your browsing of the list from the top. Not cool! Sound familiar? This a pretty common scenario with server rendered HTML content where it's so common to display lists to drill into, only to lose state in the process of returning back to the original list. Look at just about any traditional forums application, or even StackOverFlow to see what I mean here. Scroll down a bit to look at a post or entry, drill in then use the bread crumbs or tab to go back… In some cases returning to the top of a list is not a big deal. On StackOverFlow that sort of works because content is turning around so quickly you probably want to actually look at the top posts. Not always though - if you're browsing through a list of search topics you're interested in and drill in there's no way back to that position. Essentially anytime you're actively browsing the items in the list, that's when state becomes important and if it's not handled the user experience can be really disrupting. Content Caching If you're building client centric SPA style applications this is a fairly easy to solve problem - you tend to render the list once and then update the page content to overlay the detail content, only hiding the list temporarily until it's used again later. It's relatively easy to accomplish this simply by hiding content on the page and later making it visible again. But if you use server rendered content, hanging on to all the detail like filters, selections and scroll position is not quite as easy. Or is it??? This is where sessionStorage comes in handy. What if we just save the rendered content of a previous page, and then restore it when we return to this page based on a special flag that tells us to use the cached version? Let's see how we can do this. A real World Use Case Recently my local ISP asked me to help out with updating an ancient classifieds application. They had a very busy, local classifieds app that was originally an ASP classic application. The old app was - wait for it: frames based - and even though I lobbied against it, the decision was made to keep the frames based layout to allow rapid browsing of the hundreds of posts that are made on a daily basis. The primary reason they wanted this was precisely for the ability to quickly browse content item by item. While I personally hate working with Frames, I have to admit that the UI actually works well with the frames layout as long as you're running on a large desktop screen. You can check out the frames based desktop site here: http://classifieds.gorge.net/ However when I rebuilt the app I also added a secondary view that doesn't use frames. The main reason for this of course was for mobile displays which work horribly with frames. So there's a somewhat mobile friendly interface to the interface, which ditches the frames and uses some responsive design tweaking for mobile capable operation: http://classifeds.gorge.net/mobile  (or browse the base url with your browser width under 800px)   Here's what the mobile, non-frames view looks like:   As you can see this means that the list of classifieds posts now is a list and there's a separate page for drilling down into the item. And of course… originally we ran into that usability issue I mentioned earlier where the browse, view detail, go back to the list cycle resulted in lost list state. Originally in mobile mode you scrolled through the list, found an item to look at and drilled in to display the item detail. Then you clicked back to the list and BAM - you've lost your place. Because there are so many items added on a daily basis the full list is never fully loaded, but rather there's a "Load Additional Listings"  entry at the button. Not only did we originally lose our place when coming back to the list, but any 'additionally loaded' items are no longer there because the list was now rendering  as if it was the first page hit. The additional listings, and any filters, the selection of an item all were lost. Major Suckage! Using Client SessionStorage to cache Server Rendered Content To work around this problem I decided to cache the rendered page content from the list in SessionStorage. Anytime the list renders or is updated with Load Additional Listings, the page HTML is cached and stored in Session Storage. Any back links from the detail page or the login or write entry forms then point back to the list page with a back=true query string parameter. If the server side sees this parameter it doesn't render the part of the page that is cached. Instead the client side code retrieves the data from the sessionState cache and simply inserts it into the page. It sounds pretty simple, and the overall the process is really easy, but there are a few gotchas that I'll discuss in a minute. But first let's look at the implementation. Let's start with the server side here because that'll give a quick idea of the doc structure. As I mentioned the server renders data from an ASP.NET MVC view. On the list page when returning to the list page from the display page (or a host of other pages) looks like this: https://classifieds.gorge.net/list?back=True The query string value is a flag, that indicates whether the server should render the HTML. Here's what the top level MVC Razor view for the list page looks like:@model MessageListViewModel @{ ViewBag.Title = "Classified Listing"; bool isBack = !string.IsNullOrEmpty(Request.QueryString["back"]); } <form method="post" action="@Url.Action("list")"> <div id="SizingContainer"> @if (!isBack) { @Html.Partial("List_CommandBar_Partial", Model) <div id="PostItemContainer" class="scrollbox" xstyle="-webkit-overflow-scrolling: touch;"> @Html.Partial("List_Items_Partial", Model) @if (Model.RequireLoadEntry) { <div class="postitem loadpostitems" style="padding: 15px;"> <div id="LoadProgress" class="smallprogressright"></div> <div class="control-progress"> Load additional listings... </div> </div> } </div> } </div> </form> As you can see the query string triggers a conditional block that if set is simply not rendered. The content inside of #SizingContainer basically holds  the entire page's HTML sans the headers and scripts, but including the filter options and menu at the top. In this case this makes good sense - in other situations the fact that the menu or filter options might be dynamically updated might make you only cache the list rather than essentially the entire page. In this particular instance all of the content works and produces the proper result as both the list along with any filter conditions in the form inputs are restored. Ok, let's move on to the client. On the client there are two page level functions that deal with saving and restoring state. Like the counter example I showed earlier, I like to wrap the logic to save and restore values from sessionState into a separate function because they are almost always used in several places.page.saveData = function(id) { if (!sessionStorage) return; var data = { id: id, scroll: $("#PostItemContainer").scrollTop(), html: $("#SizingContainer").html() }; sessionStorage.setItem("list_html",JSON.stringify(data)); }; page.restoreData = function() { if (!sessionStorage) return; var data = sessionStorage.getItem("list_html"); if (!data) return null; return JSON.parse(data); }; The data that is saved is an object which contains an ID which is the selected element when the user clicks and a scroll position. These two values are used to reset the scroll position when the data is used from the cache. Finally the html from the #SizingContainer element is stored, which makes for the bulk of the document's HTML. In this application the HTML captured could be a substantial bit of data. If you recall, I mentioned that the server side code renders a small chunk of data initially and then gets more data if the user reads through the first 50 or so items. The rest of the items retrieved can be rather sizable. Other than the JSON deserialization that's Ok. Since I'm using SessionStorage the storage space has no immediate limits. Next is the core logic to handle saving and restoring the page state. At first though this would seem pretty simple, and in some cases it might be, but as the following code demonstrates there are a few gotchas to watch out for. Here's the relevant code I use to save and restore:$( function() { … var isBack = getUrlEncodedKey("back", location.href); if (isBack) { // remove the back key from URL setUrlEncodedKey("back", "", location.href); var data = page.restoreData(); // restore from sessionState if (!data) { // no data - force redisplay of the server side default list window.location = "list"; return; } $("#SizingContainer").html(data.html); var el = $(".postitem[data-id=" + data.id + "]"); $(".postitem").removeClass("highlight"); el.addClass("highlight"); $("#PostItemContainer").scrollTop(data.scroll); setTimeout(function() { el.removeClass("highlight"); }, 2500); } else if (window.noFrames) page.saveData(null); // save when page loads $("#SizingContainer").on("click", ".postitem", function() { var id = $(this).attr("data-id"); if (!id) return true; if (window.noFrames) page.saveData(id); var contentFrame = window.parent.frames["Content"]; if (contentFrame) contentFrame.location.href = "show/" + id; else window.location.href = "show/" + id; return false; }); … The code starts out by checking for the back query string flag which triggers restoring from the client cache. If cached the cached data structure is read from sessionStorage. It's important here to check if data was returned. If the user had back=true on the querystring but there is no cached data, he likely bookmarked this page or otherwise shut down the browser and came back to this URL. In that case the server didn't render any detail and we have no cached data, so all we can do is redirect to the original default list view using window.location. If we continued the page would render no data - so make sure to always check the cache retrieval result. Always! If there is data the it's loaded and the data.html data is restored back into the document by simply injecting the HTML back into the document's #SizingContainer element:$("#SizingContainer").html(data.html); It's that simple and it's quite quick even with a fully loaded list of additional items and on a phone. The actual HTML data is stored to the cache on every page load initially and then again when the user clicks on an element to navigate to a particular listing. The former ensures that the client cache always has something in it, and the latter updates with additional information for the selected element. For the click handling I use a data-id attribute on the list item (.postitem) in the list and retrieve the id from that. That id is then used to navigate to the actual entry as well as storing that Id value in the saved cached data. The id is used to reset the selection by searching for the data-id value in the restored elements. The overall process of this save/restore process is pretty straight forward and it doesn't require a bunch of code, yet it yields a huge improvement in the usability of the site on mobile devices (or anybody who uses the non-frames view). Some things to watch out for As easy as it conceptually seems to simply store and retrieve cached content, you have to be quite aware what type of content you are caching. The code above is all that's specific to cache/restore cycle and it works, but it took a few tweaks to the rest of the script code and server code to make it all work. There were a few gotchas that weren't immediately obvious. Here are a few things to pay attention to: Event Handling Logic Timing of manipulating DOM events Inline Script Code Bookmarking to the Cache Url when no cache exists Do you have inline script code in your HTML? That script code isn't going to run if you restore from cache and simply assign or it may not run at the time you think it would normally in the DOM rendering cycle. JavaScript Event Hookups The biggest issue I ran into with this approach almost immediately is that originally I had various static event handlers hooked up to various UI elements that are now cached. If you have an event handler like:$("#btnSearch").click( function() {…}); that works fine when the page loads with server rendered HTML, but that code breaks when you now load the HTML from cache. Why? Because the elements you're trying to hook those events to may not actually be there - yet. Luckily there's an easy workaround for this by using deferred events. With jQuery you can use the .on() event handler instead:$("#SelectionContainer").on("click","#btnSearch", function() {…}); which monitors a parent element for the events and checks for the inner selector elements to handle events on. This effectively defers to runtime event binding, so as more items are added to the document bindings still work. For any cached content use deferred events. Timing of manipulating DOM Elements Along the same lines make sure that your DOM manipulation code follows the code that loads the cached content into the page so that you don't manipulate DOM elements that don't exist just yet. Ideally you'll want to check for the condition to restore cached content towards the top of your script code, but that can be tricky if you have components or other logic that might not all run in a straight line. Inline Script Code Here's another small problem I ran into: I use a DateTime Picker widget I built a while back that relies on the jQuery date time picker. I also created a helper function that allows keyboard date navigation into it that uses JavaScript logic. Because MVC's limited 'object model' the only way to embed widget content into the page is through inline script. This code broken when I inserted the cached HTML into the page because the script code was not available when the component actually got injected into the page. As the last bullet - it's a matter of timing. There's no good work around for this - in my case I pulled out the jQuery date picker and relied on native <input type="date" /> logic instead - a better choice these days anyway, especially since this view is meant to be primarily to serve mobile devices which actually support date input through the browser (unlike desktop browsers of which only WebKit seems to support it). Bookmarking Cached Urls When you cache HTML content you have to make a decision whether you cache on the client and also not render that same content on the server. In the Classifieds app I didn't render server side content so if the user comes to the page with back=True and there is no cached content I have to a have a Plan B. Typically this happens when somebody ends up bookmarking the back URL. The easiest and safest solution for this scenario is to ALWAYS check the cache result to make sure it exists and if not have a safe URL to go back to - in this case to the plain uncached list URL which amounts to effectively redirecting. This seems really obvious in hindsight, but it's easy to overlook and not see a problem until much later, when it's not obvious at all why the page is not rendering anything. Don't use <body> to replace Content Since we're practically replacing all the HTML in the page it may seem tempting to simply replace the HTML content of the <body> tag. Don't. The body tag usually contains key things that should stay in the page and be there when it loads. Specifically script tags and elements and possibly other embedded content. It's best to create a top level DOM element specifically as a placeholder container for your cached content and wrap just around the actual content you want to replace. In the app above the #SizingContainer is that container. Other Approaches The approach I've used for this application is kind of specific to the existing server rendered application we're running and so it's just one approach you can take with caching. However for server rendered content caching this is a pattern I've used in a few apps to retrofit some client caching into list displays. In this application I took the path of least resistance to the existing server rendering logic. Here are a few other ways that come to mind: Using Partial HTML Rendering via AJAXInstead of rendering the page initially on the server, the page would load empty and the client would render the UI by retrieving the respective HTML and embedding it into the page from a Partial View. This effectively makes the initial rendering and the cached rendering logic identical and removes the server having to decide whether this request needs to be rendered or not (ie. not checking for a back=true switch). All the logic related to caching is made on the client in this case. Using JSON Data and Client RenderingThe hardcore client option is to do the whole UI SPA style and pull data from the server and then use client rendering or databinding to pull the data down and render using templates or client side databinding with knockout/angular et al. As with the Partial Rendering approach the advantage is that there's no difference in the logic between pulling the data from cache or rendering from scratch other than the initial check for the cache request. Of course if the app is a  full on SPA app, then caching may not be required even - the list could just stay in memory and be hidden and reactivated. I'm sure there are a number of other ways this can be handled as well especially using  AJAX. AJAX rendering might simplify the logic, but it also complicates search engine optimization since there's no content loaded initially. So there are always tradeoffs and it's important to look at all angles before deciding on any sort of caching solution in general. State of the Session SessionState and LocalStorage are easy to use in client code and can be integrated even with server centric applications to provide nice caching features of content and data. In this post I've shown a very specific scenario of storing HTML content for the purpose of remembering list view data and state and making the browsing experience for lists a bit more friendly, especially if there's dynamically loaded content involved. If you haven't played with sessionStorage or localStorage I encourage you to give it a try. There's a lot of cool stuff that you can do with this beyond the specific scenario I've covered here… Resources Overview of localStorage (also applies to sessionStorage) Web Storage Compatibility Modernizr Test Suite© Rick Strahl, West Wind Technologies, 2005-2013Posted in JavaScript  HTML5  ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Mocking the Unmockable: Using Microsoft Moles with Gallio

  - by Thomas Weller

  Usual opensource mocking frameworks (like e.g. Moq or Rhino.Mocks) can mock only interfaces and virtual methods. In contrary to that, Microsoft’s Moles framework can ‘mock’ virtually anything, in that it uses runtime instrumentation to inject callbacks in the method MSIL bodies of the moled methods. Therefore, it is possible to detour any .NET method, including non-virtual/static methods in sealed types. This can be extremely helpful when dealing e.g. with code that calls into the .NET framework, some third-party or legacy stuff etc… Some useful collected resources (links to website, documentation material and some videos) can be found in my toolbox on Delicious under this link: http://delicious.com/thomasweller/toolbox+moles A Gallio extension for Moles Originally, Moles is a part of Microsoft’s Pex framework and thus integrates best with Visual Studio Unit Tests (MSTest). However, the Moles sample download contains some additional assemblies to also support other unit test frameworks. They provide a Moled attribute to ease the usage of mole types with the respective framework (there are extensions for NUnit, xUnit.net and MbUnit v2 included with the samples). As there is no such extension for the Gallio platform, I did the few required lines myself – the resulting Gallio.Moles.dll is included with the sample download. With this little assembly in place, it is possible to use Moles with Gallio like that: [Test, Moled] public void SomeTest() {     ... What you can do with it Moles can be very helpful, if you need to ‘mock’ something other than a virtual or interface-implementing method. This might be the case when dealing with some third-party component, legacy code, or if you want to ‘mock’ the .NET framework itself. Generally, you need to announce each moled type that you want to use in a test with the MoledType attribute on assembly level. For example: [assembly: MoledType(typeof(System.IO.File))] Below are some typical use cases for Moles. For a more detailed overview (incl. naming conventions and an instruction on how to create the required moles assemblies), please refer to the reference material above.  Detouring the .NET framework Imagine that you want to test a method similar to the one below, which internally calls some framework method:   public void ReadFileContent(string fileName) {     this.FileContent = System.IO.File.ReadAllText(fileName); } Using a mole, you would replace the call to the File.ReadAllText(string) method with a runtime delegate like so: [Test, Moled] [Description("This 'mocks' the System.IO.File class with a custom delegate.")] public void ReadFileContentWithMoles() {     // arrange ('mock' the FileSystem with a delegate)     System.IO.Moles.MFile.ReadAllTextString = (fname => fname == FileName ? FileContent : "WrongFileName");       // act     var testTarget = new TestTarget.TestTarget();     testTarget.ReadFileContent(FileName);       // assert     Assert.AreEqual(FileContent, testTarget.FileContent); } Detouring static methods and/or classes A static method like the below… public static string StaticMethod(int x, int y) {     return string.Format("{0}{1}", x, y); } … can be ‘mocked’ with the following: [Test, Moled] public void StaticMethodWithMoles() {     MStaticClass.StaticMethodInt32Int32 = ((x, y) => "uups");       var result = StaticClass.StaticMethod(1, 2);       Assert.AreEqual("uups", result); } Detouring constructors You can do this delegate thing even with a class’ constructor. The syntax for this is not all  too intuitive, because you have to setup the internal state of the mole, but generally it works like a charm. For example, to replace this c’tor… public class ClassWithCtor {     public int Value { get; private set; }       public ClassWithCtor(int someValue)     {         this.Value = someValue;     } } … you would do the following: [Test, Moled] public void ConstructorTestWithMoles() {     MClassWithCtor.ConstructorInt32 =            ((@class, @value) => new MClassWithCtor(@class) {ValueGet = () => 99});       var classWithCtor = new ClassWithCtor(3);       Assert.AreEqual(99, classWithCtor.Value); } Detouring abstract base classes You can also use this approach to ‘mock’ abstract base classes of a class that you call in your test. Assumed that you have something like that: public abstract class AbstractBaseClass {     public virtual string SaySomething()     {         return "Hello from base.";     } }      public class ChildClass : AbstractBaseClass {     public override string SaySomething()     {         return string.Format(             "Hello from child. Base says: '{0}'",             base.SaySomething());     } } Then you would set up the child’s underlying base class like this: [Test, Moled] public void AbstractBaseClassTestWithMoles() {     ChildClass child = new ChildClass();     new MAbstractBaseClass(child)         {                 SaySomething = () => "Leave me alone!"         }         .InstanceBehavior = MoleBehaviors.Fallthrough;       var hello = child.SaySomething();       Assert.AreEqual("Hello from child. Base says: 'Leave me alone!'", hello); } Setting the moles behavior to a value of  MoleBehaviors.Fallthrough causes the ‘original’ method to be called if a respective delegate is not provided explicitly – here it causes the ChildClass’ override of the SaySomething() method to be called. There are some more possible scenarios, where the Moles framework could be of much help (e.g. it’s also possible to detour interface implementations like IEnumerable<T> and such…). One other possibility that comes to my mind (because I’m currently dealing with that), is to replace calls from repository classes to the ADO.NET Entity Framework O/R mapper with delegates to isolate the repository classes from the underlying database, which otherwise would not be possible… Usage Since Moles relies on runtime instrumentation, mole types must be run under the Pex profiler. This only works from inside Visual Studio if you write your tests with MSTest (Visual Studio Unit Test). While other unit test frameworks generally can be used with Moles, they require the respective tests to be run via command line, executed through the moles.runner.exe tool. A typical test execution would be similar to this: moles.runner.exe <mytests.dll> /runner:<myframework.console.exe> /args:/<myargs> So, the moled test can be run through tools like NCover or a scripting tool like MSBuild (which makes them easy to run in a Continuous Integration environment), but they are somewhat unhandy to run in the usual TDD workflow (which I described in some detail here). To make this a bit more fluent, I wrote a ReSharper live template to generate the respective command line for the test (it is also included in the sample download – moled_cmd.xml). - This is just a quick-and-dirty ‘solution’. Maybe it makes sense to write an extra Gallio adapter plugin (similar to the many others that are already provided) and include it with the Gallio download package, if  there’s sufficient demand for it. As of now, the only way to run tests with the Moles framework from within Visual Studio is by using them with MSTest. From the command line, anything with a managed console runner can be used (provided that the appropriate extension is in place)… A typical Gallio/Moles command line (as generated by the mentioned R#-template) looks like that: "%ProgramFiles%\Microsoft Moles\bin\moles.runner.exe" /runner:"%ProgramFiles%\Gallio\bin\Gallio.Echo.exe" "Gallio.Moles.Demo.dll" /args:/r:IsolatedAppDomain /args:/filter:"ExactType:TestFixture and Member:ReadFileContentWithMoles" -- Note: When using the command line with Echo (Gallio’s console runner), be sure to always include the IsolatedAppDomain option, otherwise the tests won’t use the instrumentation callbacks! -- License issues As I already said, the free mocking frameworks can mock only interfaces and virtual methods. if you want to mock other things, you need the Typemock Isolator tool for that, which comes with license costs (Although these ‘costs’ are ridiculously low compared to the value that such a tool can bring to a software project, spending money often is a considerable gateway hurdle in real life...).  The Moles framework also is not totally free, but comes with the same license conditions as the (closely related) Pex framework: It is free for academic/non-commercial use only, to use it in a ‘real’ software project requires an MSDN Subscription (from VS2010pro on). The demo solution The sample solution (VS 2008) can be downloaded from here. It contains the Gallio.Moles.dll which provides the here described Moled attribute, the above mentioned R#-template (moled_cmd.xml) and a test fixture containing the above described use case scenarios. To run it, you need the Gallio framework (download) and Microsoft Moles (download) being installed in the default locations. Happy testing…

  Read the article

• Fixing a SkyDrive Sync Disaster

  - by Rick Strahl

  For a few months I've been using SkyDrive to handle some basic synching tasks for a number of folders of mine. Specifically I've been dumping a few of my development folders into sky drive so I have a live running backup. It had been working just fine until about a week ago when something went awry. Badly! The idea is that the SkyDrive should sync files, but somewhere in its sync relationship it appears that SkyDrive got confused and assumed it needed to sync back older files to my local machine from the SkyDrive server. So rather than syncing my newer files to the server SkyDrive was pushing older files back to me. Because SkyDrive is so slow actually updating data it's not unusual for SkyDrive to be far behind in syncing and apparently some files were out of date by several months. Of course this is insidious because I didn't notice it for quite some time. I'd been happily working away on my files when a few days ago I noted a bunch of files with -RasXps (my machine name) popping up in various folders. At first I thought my Git repository was giving me a fit, but eventually realized that SkyDrive was actually pushing old files into my monitored folders. To be fair SkyDrive did make backups of the existing files, but by the time I caught it there were literally a few thousand files scattered on my machine that were now updated with old files from online. Here's what some of this looks like: If you look at the directory list you see a bunch of files with a -RasXps postfix appended to them. Those are the files that SkyDrive replaced and backed up on my machine. As you can see the backed up files are actually newer than the ones it pulled from the online SkyDrive. Unless I modified the files after they were updated they all were older than the existing local files. Not exactly how I imagined my synching would work. At first I started cleaning up this mess manually. In most cases the obvious solution was to simply delete the original file and replace with the -RasXps file, but not in all files. Some scrutiny was required and besides being a pain in the ass to rename files, quite frequently I had to dig out Beyond Compare to compare a few files where it wasn't quite clear what's wrong. I quickly realized that doing this by hand would be too hard for the large number of files that got hosed. Hacking together a small .NET Utility So, I figured the easiest way to tackle this is to write a small utility app that shows me all the mangled files that have backups, allows me to compare them and then quickly select and update them, removing the -RasXps file after choosing one of the two files. What I ended up with was a quick and dirty WinForms app that allows me to pick a root folder, and then shows all the -MachineName files: I start by picking a base folder and a template to search for - typically the -MachineName. Clicking Go brings up a list of all files in that folder and its subdirectories.  The list also displays the dates for the saved (-MachineName) file and the current file on disk, along with highlighting for the newer of the two. I can right click on any file and get a context menu pop up to open the folder in Explorer, or open Beyond Compare and view the two files to compare differences which I found very helpful for a number of files where I had modified the files after SkyDrive had updated to an old one. Typically these would be the green files (of which there were thankfully few). To 'fix' files I can select any number of files in the list, then use one of the three buttons on the right to apply an operation. I can use the Saved files - that is the backup file that SkyDrive created with the -MachineName extension (-RasXps above). Or I can use the current file, which is the file with the right name on disk right now and delete the -MachineName file. Or on some occasions I can just opt to delete both of them. For some files like binaries it's often easier to just delete and them be rebuild than choosing. For the most part the process involves accepting the pink files, and checking the few green files and see if any modifications were made since the file was updated incorrectly by SkyDrive. For me luckily those are few in number. Anyways, I thought I share this utility in case anybody else runs into this issue. I've included the VS2012 solution and all the source code so you can see how it works and you can tweak it as needed. The .NET 4.5 binaries are also included if you can't compile. Be warned though!  This rough code is provided as is and makes no guarantees or claims about file safety. All three of the action buttons on the form will delete data. It's a very rough utility and there are no safeguards that ask nicely before deleting files. I highly recommend you make a backup before you have at it. This tools is very narrow in focus, but it might also work with other sync issues from other vendors. I seem to remember that I had similar issues with SugarSync at some point and it too created the -MachineName style files on sync conflicts. Hope this helps somebody out so you can avoid wasting the better part of a full work day on this… Resources Download the Source Code and Binaries for SkyDrive Rescue© Rick Strahl, West Wind Technologies, 2005-2013Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Thursday, April 15, 2010

  CodePlex Daily Summary for Thursday, April 15, 2010New ProjectsApplication Logging Repository (ALR): The ALR is a light-weight logging framework that allows applications to log events and exceptions to a central repository.Arkane.FileProperties.DSS: Arkane.FileProperties.Dss is a library for parsing the file header of a .DSS file (as used by Olympus digital dictaphone systems) to obtain time, v...B in conTrol project: This project enables controling log-in and locking your workstation automatically, identifyng you bluetooth.DarkBook: DarkBook is a personal library project.Direct2D for Microsoft .Net: Direct2D, DirectWrite and Windows Imaging wrappers for .Net. This library allows to access Direct2D, DirectWrite and Windows Imaging Windows API f...DJ Ware: DJ Ware is an extensible music player with plugin support and innovative features to organize and explore music files. It is developed with C#, WPF...gpsMe: gpsMe is a Windows Mobile 6.x mapping solution allowing to place the user on a personnalized map. The screen requirements are VGA or WVGA but, you ...jErrorLog: jErrorLog is an error logging component for use in DotNet 2.0 or later applications. It can log error messages to any of the following: database, e...KEMET_API: Java Library (open - source). This library is a help to study egyptian hieroglyphs.Meadow: A web site project for a Swedish floorball team called Slackers. Home page built with ASP.NET 2.0, ASP.NET AJAX and SQL Server 2005.Mustang Math: Mustang Math makes it easier for young children to practice basic math facts on the computer. No keyboard or mouse required - just say the answer!...Net.Formats.oEmbed: oEmbed format implementation in c#. oEmbed is a format for allowing an embedded representation of a URL on third party sites. The simple API allows...Normlize O/R Mapper: Open source O/RM tool that participates with traditional inheritance object models as well as Hibernate/nHibernate style class shells. As I have t...N-Twill Twitter Client for VB.NET: Proyecto de cliente twitter hecho con la libreria TwitterVB2 y hecho en VB.net 2008.SIQM: Spatial Information Quality Management Toolset TIMETABLEASY Web: Under developmentTweetSharp: TweetSharp is a complete .NET library for micro-blogging platforms that allows you to write short and sweet expressions that fly to Twitter, Yammer...UISandbox: UISandbox is a sample C# source code showing how to deal with plugins requiring sandbox, when those plugins must interact with WPF application inte...WinForm SharePoint Web Part Manager: The SharePoint Web Part Manager is a WinForm tool using the SharePoint object model that enables developers and power users to add, update, delete,...WoW Character Viewer: View your World of Warcraft character (or anyone else's character), using this application. Written using Visual Basic Express 2008, then ported t...Xrns2XMod: Xrns2XMod converts from Renoise format (xrns) to mod or xm, which are more compatible formats playable from xmplay or vlc.New ReleasesArkane.FileProperties.DSS: 1.0 stable release: Executables and merge module for 1.0. (See documentation.)Bluetooth Radar: Version 2.0: Add IrDA reference for Bluetooth sending using Obex Add Project icon Add Bluetooth detection mode (Auto close application is there is no blueto...BUtil: BUtil 5.0 Alpha: Backup tasks adding.... in progressChronos WPF: Chronos v1.0 RC 1: Chronos v1.0 RC 1. Development will be feature frozen after this release, only bug fixes will be allowed. Updated nRoute assembly to v0.4 (http:...clipShow: Version 2.5: Release that addresses the canonical syntax issues in search discoverd by Tschachim (thanks again!). Also, the play list and play all menu items s...DarkBook: DarkBook alpha: Hi, here comes the alpha version of Darkbook. It has all the functions already but is still in developing. I hope it's helpful for you, at least it...DirectQ: Release 1.8.3a: Improvements to 1.8.2, which will be shortly be removed. This replaces the original 1.8.3 release from earlier today which had some late-breaking ...Effect Custom Tool for Visual Studio: Effect Custom Tool v1.1: Effect Custom Tool for Visual Studio is a visual studio 2008 extension that helps you generate c# classes from effect (*.fx) files for use with Xna...Folder Bookmarks: Folder Bookmarks 1.4.3: This is the latest version of Folder Bookmarks (1.4.3), with general improvements. It has an installer - it will create a directory 'CPascoe' in My...gpsMe: gpsMe v0.3: Required Hardware Windows Mobile 6 .Net Compact Framework 3.5 integrated gps device VGA or WVGA screen (normally works on others)IST435: Lab 4 - Enterprise Level CMS with DotNetNuke: Lab 4 - Enterprise Level CMS with DotNetNukeThis is the "starter kit" that you must base your Lab 4 on. This lab must be completed in-class.Mouse Jiggler: MouseJiggle-1.1: 1.1 release of Mouse Jiggler, now with x64 compatibility and the ability to start jiggling on run with the --jiggle or -j command-line switch.Mustang Math: MustangMath.exe: This is a quick and dirty "0.1" prototype to demonstrate the speech recognition idea. It starts asking you questions automatically on launch and k...MvcContrib: a Codeplex Foundation project: 2.0.36.0 for MVC2 (RTW): Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcC...Nito.LINQ: Beta (v0.3): New features for this release: Several new supported platforms (see below). PDBs that are source-indexed to the appropriate CodePlex changeset. ...OpenIdPortableArea: 0.1.0.2 OpenIdPortableArea: OpenIdPortableArea.Release: DotNetOpenAuth.dll DotNetOpenAuth.xml MvcContrib.dll MvcContrib.xml OpenIdPortableArea.dll OpenIdPortableAre...PokeIn Comet Ajax Library: PokeIn Sample with Library v0.2: New version of PokeIn library with sample. v0.2 There are new features in this release and no bug detected yet.Project Tru Tiên: Elements-test V1-fix (v2): Là EL test được fix tiếp theo bản fix V1, tạm gọi đây là bản fix V2 của ELtest Trong bản fix này EL được fix thêm vụ Quest, Quest chỉnh sửa đúng t...Rule 18 - Love your clipboard: Rule 18: This is the third public beta for the first version of Rule 18. This version has been updated to support Visual Studio 2010 RTM and .NET 4.0 RTM. ...SevenZipSharp: SevenZipSharp 0.62: Added: Extraction from SFX archives. Now it is possible to unrar RAR self-extractors, unzip ZIP self-extractors, etc. Extraction from DOC, XLS, (...SharePoint Labs: SPLab3001A-FRA-Level200: SPLab3001A-FRA-Level200 This SharePoint Lab will teach the persistence object layer that SharePoint uses to centraly store configuration data and o...TTXPathNavigator: TTXPathNavigator for VS2010: Version for Visual Studio 2010turing machine simulator: SDS: SDS documentVecDraw: VecDraw_0.2.25: Alpha release for test purposesWinForm SharePoint Web Part Manager: Beta 1: First release of the WinForm SharePoitn web part manager toolXrns2XMod: Xrns2XMod 0.5.1: Mod and XM conversion format - No sample data conversion at momentZip Solution: ZipSolution 5.3: Features: 1. Added WaitMsec for visual studio support with getting access to files in post build event; 2. Added ShowTextInToolbars to app.config ...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelpatterns & practices – Enterprise LibraryMost Active ProjectsRawrpatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationFarseer Physics EngineIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBlogEngine.NETjQuery Library for SharePoint Web ServicesDotRasFacebook Developer Toolkit

  Read the article

• The DOS DEBUG Environment

  - by MarkPearl

  Today I thought I would go back in time and have a look at the DEBUG command that has been available since the beginning of dawn in DOS, MS-DOS and Microsoft Windows. up to today I always knew it was there, but had no clue on how to use it so for those that are interested this might be a great geek party trick to pull out when you want the awe the younger generation and want to show them what “real” programming is about. But wait, you will have to do it relatively quickly as it seems like DEBUG was finally dumped from the Windows group in Windows 7. Not to worry, pull out that Windows XP box which will get you even more geek points and you can still poke DEBUG a bit. So, for those that are interested and want to find out a bit about the history of DEBUG read the wiki link here. That all put aside, lets get our hands dirty.. How to Start DEBUG in Windows Make sure your version of Windows supports DEBUG. Open up a console window Make a directory where you want to play with debug – in my instance I called it C221 Enter the directory and type Debug You will get a response with a – as illustrated in the image below…   The commands available in DEBUG There are several commands available in DEBUG. The most common ones are A (Assemble) R (Register) T (Trace) G (Go) D (Dump or Display) U (Unassemble) E (Enter) P (Proceed) N (Name) L (Load) W (Write) H (Hexadecimal) I (Input) O (Output) Q (Quit) I am not going to cover all these commands, but what I will do is go through a few of them briefly. A is for Assemble Command (to write code) The A command translates assembly language statements into machine code. It is quite useful for writing small assembly programs. Below I have written a very basic assembly program. The code typed out is as follows mov ax,0015 mov cx,0023 sub cx,ax mov [120],al mov cl,[120]A nop R is for Register (to jump to a point in memory) The r command turns out to be one of the most frequent commands you will use in DEBUG. It allows you to view the contents of registers and to change their values. It can be used with the following combinations… R – Displays the contents of all the registers R f – Displays the flags register R register_name – Displays the contents of a specific register All three methods are illustrated in the image above T is for Trace (To execute a program step by step) The t command allows us to execute the program step by step. Before we can trace the program we need to point back to the beginning of the program. We do this by typing in r ip, which moves us back to memory point 100. We then type trace which executes the first line of code (line 100) (As shown in the image below starting from the red arrow). You can see from the above image that the register AX now contains 0015 as per our instruction mov ax,0015 You can also see that the IP points to line 0103 which has the MOV CX,0023 command If we type t again it will now execute the second line of the program which moves 23 in the cx register. Again, we can see that the line of code was executed and that the CX register now holds the value of 23. What I would like to highlight now is the section underlined in red. These are the status flags. The ones we are going to look at now are 1st (NV), 4th (PL), 5th (NZ) & 8th (NC) NV means no overflow, the alternate would be OV PL means that the sign of the previous arithmetic operation was Plus, the alternate would be NG (Negative) NZ means that the results of the previous arithmetic operation operation was Not Zero, the alternate would be ZR NC means that No final Carry resulted from the previous arithmetic operation. CY means that there was a final Carry. We could now follow this process of entering the t command until the entire program is executed line by line. G is for Go (To execute a program up to a certain line number) So we have looked at executing a program line by line, which is fine if your program is minuscule BUT totally unpractical if we have any decent sized program. A quicker way to run some lines of code is to use the G command. The ‘g’ command executes a program up to a certain specified point. It can be used in connection with the the reset IP command. You would set your initial point and then run the G command with the line you want to end on. P is for Proceed (Similar to trace but slightly more streamlined) Another command similar to trace is the proceed command. All that the p command does is if it is called and it encounters a CALL, INT or LOOP command it terminates the program execution. In the example below I modified our example program to include an int 20 at the end of it as illustrated in the image below… Then when executing the code when I encountered the int 20 command I typed the P command and the program terminated normally (illustrated below). D is for Dump (or for those more polite Display) So, we have all these assembly lines of code, but if you have ever opened up an exe or com file in a text/hex editor, it looks nothing like assembly code. The D command is a way that we can see what our code looks like in memory (or in a hex editor). If we examined the image above, we can see that Debug is storing our assembly code with each instruction following immediately after the previous one. For instance in memory address 110 we have int and 111 we have 20. If we examine the dump of memory we can see at memory point 110 CD is stored and at memory point 111 20 is stored. U is for Unassemble (or Convert Machine code to Assembly Code) So up to now we have gone through a bunch of commands, but probably one of the most useful is the U command. Let’s say we don’t understand machine code so well and so instead we want to see it in its equivalent assembly code. We can type the U command followed by the start memory point, followed by the end memory point and it will show us the assembly code equivalent of the machine code. E is for a bunch of things… The E command can be used for a bunch of things… One example is to enter data or machine code instructions directly into memory. It can also be used to display the contents of memory locations. I am not going to worry to much about it in this post. N / L / W is for Name, Load & Write So we have written out assembly code in debug, and now we want to save it to disk, or write it as a com file or load it. This is where the N, L & W command come in handy. The n command is used to give a name to the executable program file and is pretty simple to use. The w command is a bit trickier. It saves to disk all the memory between point bx and point cx so you need to specify the bx memory address and the cx memory address for it to write your code. Let’s look at an example illustrated below. You do this by calling the r command followed by the either bx or cx. We can then go to the directory where we were working and will see the new file with the name we specified. The L command is relatively simple. You would first specify the name of the file you would like to load using the N command, and then call the L command. Q is for Quit The last command that I am going to write about in this post is the Q command. Simply put, calling the Q command exits DEBUG. Commands we did not Cover Out of the standard DEBUG commands we covered A, T, G, D, U, E, P, R, N, L & W. The ones we did not cover were H, I & O – I might make mention of these in a later post, but for the basics they are not really needed. Some Useful Resources Please note this post is based on the COS2213 handouts for UNISA A Guide to DEBUG - http://mirror.href.com/thestarman/asm/debug/debug.htm#NT

  Read the article

• Creating vCard action result

  - by DigiMortal

  I added support for vCards to one of my ASP.NET MVC applications. I worked vCard support out as very simple and intelligent solution that fits perfectly to ASP.NET MVC applications. In this posting I will show you how to send vCards out as response to ASP.NET MVC request. We need three things: some vCard class, vCard action result, controller method to test vCard action result. Everything is very simple, let’s get hands on. vCard class As first thing we need vCard class. Last year I introduced vCard class that supports also images. Let’s take this class because it is easy to use and some dirty work is already done for us. NB! Take a look at ASP.NET example in the blog posting referred above. We need it later when we close the topic. Now think about how useful blogging and information sharing with others can be. With this class available at public I saved pretty much time now. :) vCardResult As we have vCard it is now time to write action result that we can use in our controllers. Here’s the code. public class vCardResult : ActionResult {     private vCard _card;       protected vCardResult() { }       public vCardResult(vCard card)     {         _card = card;     }       public override void ExecuteResult(ControllerContext context)     {         var response = context.HttpContext.Response;         response.ContentType = "text/vcard";         response.AddHeader("Content-Disposition", "attachment; fileName=" + _card.FirstName + " " + _card.LastName + ".vcf");           var cardString = _card.ToString();         var inputEncoding = Encoding.Default;         var outputEncoding = Encoding.GetEncoding("windows-1257");         var cardBytes = inputEncoding.GetBytes(cardString);           var outputBytes = Encoding.Convert(inputEncoding,                                 outputEncoding, cardBytes);           response.OutputStream.Write(outputBytes, 0, outputBytes.Length);     } } And we are done. Some notes: vCard is sent to browser as downloadable file (user can save or open it with Outlook or any other e-mail client that supports vCards), File name is made of first and last name of contact. Encoding is important because Outlook may not understand vCards otherwise (don’t know if this problem is solved in Outlook 2010). Using vCardResult in controller Now let’s tale a look at simple controller method that accepts person ID and returns vCardResult. public class ContactsController : Controller {       // ... other controller methods ...       public vCardResult vCard(int id)     {         var person = _partyRepository.GetPersonById(id);         var card = new vCard                 {                     FirstName=person.FirstName,                     LastName = person.LastName,                     StreetAddress = person.StreetAddress,                     City = person.City,                     CountryName = person.Country.Name,                       Mobile = person.Mobile,                     Phone = person.Phone,                     Email = person.Email,                 };           return new vCardResult(card);     } } Now you can run Visual Studio and check out how your vCard is moving from your web application to your e-mail client. Conclusion We took old code that worked well with ASP.NET Forms and we divided it into action result and controller method that uses vCard as bridge between our controller and action result. All functionality is located where it should be and we did nothing complex. We wrote only couple of lines of very easy code to achieve our goal. Do you understand now why I love ASP.NET MVC? :)

  Read the article

• Why did Ubuntu suddenly get so slow?

  - by user101383

  12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

  Read the article

• Using Sitecore RenderingContext Parameters as MVC controller action arguments

  - by Kyle Burns

  I have been working with the Technical Preview of Sitecore 6.6 on a project and have been for the most part happy with the way that Sitecore (which truly is an MVC implementation unto itself) has been expanded to support ASP.NET MVC. That said, getting up to speed with the combined platform has not been entirely without stumbles and today I want to share one area where Sitecore could have really made things shine from the "it just works" perspective. A couple days ago I was asked by a colleague about the usage of the "Parameters" field that is defined on Sitecore's Controller Rendering data template. Based on the standard way that Sitecore handles a field named Parameters, I was able to deduce that the field expected key/value pairs separated by the "&" character, but beyond that I wasn't sure and didn't see anything from a documentation perspective to guide me, so it was time to dig and find out where the data in the field was made available. My first thought was that it would be really nice if Sitecore handled the parameters in this field consistently with the way that ASP.NET MVC handles the various parameter collections on the HttpRequest object and automatically maps them to parameters of the action method executing. Being the hopeful sort, I configured a name/value pair on one of my renderings, added a parameter with matching name to the controller action and fired up the bugger to see... that the parameter was not populated. Having established that the field's value was not going to be presented to me the way that I had hoped it would, the next assumption that I would work on was that Sitecore would handle this field similar to how they handle other similar data and would plug it into some ambient object that I could reference from within the controller method. After a considerable amount of guessing, testing, and cracking code open with Redgate's Reflector (a must-have companion to Sitecore documentation), I found that the most direct way to access the parameter was through the ambient RenderingContext object using code similar to: string myArgument = string.Empty; var rc = Sitecore.Mvc.Presentation.RenderingContext.CurrentOrNull; if (rc != null) {     var parms = rc.Rendering.Parameters;     myArgument = parms["myArgument"]; } At this point, we know how this field is used out of the box from Sitecore and can provide information from Sitecore's Content Editor that will be available when the controller action is executing, but it feels a little dirty. In order to properly test the action method I would have to do a lot of setup work and possible use an isolation framework such as Pex and Moles to get at a value that my action method is dependent upon. Notice I said that my method is dependent upon the value but in order to meet that dependency I've accepted another dependency upon Sitecore's RenderingContext.  I'm a big believer in, when possible, ensuring that any piece of code explicitly advertises dependencies using the method signature, so I found myself still wanting this to work the same as if the parameters were in the request route, querystring, or form by being able to add a myArgument parameter to the action method and have this parameter populated by the framework. Lucky for us, the ASP.NET MVC framework is extremely flexible and provides some easy to grok and use extensibility points. ASP.NET MVC is able to provide information from the request as input parameters to controller actions because it uses objects which implement an interface called IValueProvider and have been registered to service the application. The most basic statement of responsibility for an IValueProvider implementation is "I know about some data which is indexed by key. If you hand me the key for a piece of data that I know about I give you that data". When preparing to invoke a controller action, the framework queries registered IValueProvider implementations with the name of each method argument to see if the ValueProvider can supply a value for the parameter. (the rest of this post will assume you're working along and make a lot more sense if you do) Let's pull Sitecore out of the equation for a second to simplify things and create an extremely simple IValueProvider implementation. For this example, I first create a new ASP.NET MVC3 project in Visual Studio, selecting "Internet Application" and otherwise taking defaults (I'm assuming that anyone reading this far in the post either already knows how to do this or will need to take a quick run through one of the many available basic MVC tutorials such as the MVC Music Store). Once the new project is created, go to the Index action of HomeController.  This action sets a Message property on the ViewBag to "Welcome to ASP.NET MVC!" and invokes the View, which has been coded to display the Message. For our example, we will remove the hard coded message from this controller (although we'll leave it just as hard coded somewhere else - this is sample code). For the first step in our exercise, add a string parameter to the Index action method called welcomeMessage and use the value of this argument to set the ViewBag.Message property. The updated Index action should look like: public ActionResult Index(string welcomeMessage) {     ViewBag.Message = welcomeMessage;     return View(); } This represents the entirety of the change that you will make to either the controller or view.  If you run the application now, the home page will display and no message will be presented to the user because no value was supplied to the Action method. Let's now write a ValueProvider to ensure this parameter gets populated. We'll start by creating a new class called StaticValueProvider. When the class is created, we'll update the using statements to ensure that they include the following: using System.Collections.Specialized; using System.Globalization; using System.Web.Mvc; With the appropriate using statements in place, we'll update the StaticValueProvider class to implement the IValueProvider interface. The System.Web.Mvc library already contains a pretty flexible dictionary-like implementation called NameValueCollectionValueProvider, so we'll just wrap that and let it do most of the real work for us. The completed class looks like: public class StaticValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider;     public StaticValueProvider(ControllerContext controllerContext)     {         var parameters = new NameValueCollection();         parameters.Add("welcomeMessage", "Hello from the value provider!");         _wrappedProvider = new NameValueCollectionValueProvider(parameters, CultureInfo.InvariantCulture);     }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } Notice that the only entry in the collection matches the name of the argument to our HomeController's Index action.  This is the important "secret sauce" that will make things work. We've got our new value provider now, but that's not quite enough to be finished. Mvc obtains IValueProvider instances using factories that are registered when the application starts up. These factories extend the abstract ValueProviderFactory class by initializing and returning the appropriate implementation of IValueProvider from the GetValueProvider method. While I wouldn't do so in production code, for the sake of this example, I'm going to add the following class definition within the StaticValueProvider.cs source file: public class StaticValueProviderFactory : ValueProviderFactory {     public override IValueProvider GetValueProvider(ControllerContext controllerContext)     {         return new StaticValueProvider(controllerContext);     } } Now that we have a factory, we can register it by adding the following line to the end of the Application_Start method in Global.asax.cs: ValueProviderFactories.Factories.Add(new StaticValueProviderFactory()); If you've done everything right to this point, you should be able to run the application and be presented with the home page reading "Hello from the value provider!". Now that you have the basics of the IValueProvider down, you have everything you need to enhance your Sitecore MVC implementation by adding an IValueProvider that exposes values from the ambient RenderingContext's Parameters property. I'll provide the code for the IValueProvider implementation (which should look VERY familiar) and you can use the work we've already done as a reference to create and register the factory: public class RenderingContextValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider = null;     public RenderingContextValueProvider(ControllerContext controllerContext)     {         var collection = new NameValueCollection();         var rc = RenderingContext.CurrentOrNull;         if (rc != null && rc.Rendering != null)         {             foreach(var parameter in rc.Rendering.Parameters)             {                 collection.Add(parameter.Key, parameter.Value);             }         }         _wrappedProvider = new NameValueCollectionValueProvider(collection, CultureInfo.InvariantCulture);         }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } In this post I've discussed the MVC IValueProvider used to map data to controller action method arguments and how this can be integrated into your Sitecore 6.6 MVC solution.

  Read the article

• Resolving data redundancy up front

  - by okeofs

  Introduction As all of us do when confronted with a problem, the resource of choice is to ‘Google it’. This is where the plot thickens. Recently I was asked to stage data from numerous databases which were to be loaded into a data warehouse. To make a long story short, I was looking for a manner in which to obtain the table names from each database, to ascertain potential overlap.   As the source data comes from a SQL database created from dumps of a third party product,  one could say that there were +/- 95 tables for each database.   Yes I know that first instinct is to use the system stored procedure “exec sp_msforeachdb 'select "?" AS db, * from [?].sys.tables'”. However, if one stops to think about this, it would be nice to have all the results in a temporary or disc based  table; which in itself , implies additional labour. This said,  I decided to ‘re-invent’ the wheel. The full code sample may be found at the bottom of this article.   Define a few temporary tables and variables   declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ -- A temp table to hold the names of my databases CREATE TABLE #rawdata1 (    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) )     --A temp table with the same database names as above, HOWEVER using an --Identity number (recNO) as a loop variable. --You will note below that I loop through until I reach 25 (see below) as at --that point the system databases, the reporting server database etc begin. --1- 24 are user databases. These are really what I was looking for. --Whilst NOT the best solution,it works and the code was meant as a quick --and dirty. CREATE TABLE #rawdata11 (    recNo int identity(1,1),    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) )   --My output table showing the database name and table name CREATE TABLE ##rawdata3 (    database_name varchar(75) ,    table_name varchar(75), )   Insert the database names into a temporary table I pull the database names using the system stored procedure sp_databases   INSERT INTO #rawdata1 EXEC sp_databases Go   Insert the results from #rawdata1 into a table containing a record number  #rawdata11 so that I can LOOP through the extract   INSERT into #rawdata11 select * from  #rawdata1   We now declare 3 more variables:  @kounter is used to keep track of our position within the loop. @databasename is used to keep track of the’ current ‘ database name being used in the current pass of the loop;  as inorder to obtain the tables for that database we  need to issue a ‘USE’ statement, an insert command and other related code parts. This is the challenging part. @sql is a varchar(max) variable used to contain the ‘USE’ statement PLUS the’ insert ‘ code statements. We now initalize @kounter to 1 .   declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1   The Loop The astute reader will remember that the temporary table #rawdata11 contains our  database names  and each ‘database row’ has a record number (recNo). I am only interested in record numbers under 25. I now set the value of the temporary variable @DatabaseName (see below) .Note that I used the row number as a part of the predicate. Now, knowing the database name, I can create dynamic T-SQL to be executed using the sp_sqlexec stored procedure (see the code in red below). Finally, after all the tables for that given database have been placed in temporary table ##rawdata3, I increment the counter and continue on. Note that I used a global temporary table to ensure that the result set persists after the termination of the run. At some stage, I plan to redo this part of the code, as global temporary tables are not really an ideal solution.    WHILE (@kounter < 25)  BEGIN  select @DatabaseName = database_name from #rawdata11 where recNo = @kounter  set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec  @Sql  SET @kounter  = @kounter + 1  END   The full code extract   Here is the full code sample.   declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ CREATE TABLE #rawdata1 (    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) ) CREATE TABLE #rawdata11 (    recNo int identity(1,1),    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) ) CREATE TABLE ##rawdata3 (    database_name varchar(75) ,    table_name varchar(75), )   INSERT INTO #rawdata1 EXEC sp_databases go INSERT into #rawdata11 select * from  #rawdata1 declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1 WHILE (@kounter < 25)  BEGIN  select @databasename = database_name from #rawdata11 where recNo = @kounter  set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec  @Sql  SET @kounter  = @kounter + 1  END    select * from ##rawdata3  where table_name like '%SalesOrderHeader%'

  Read the article

• Organization &amp; Architecture UNISA Studies &ndash; Chap 4

  - by MarkPearl

  Learning Outcomes Explain the characteristics of memory systems Describe the memory hierarchy Discuss cache memory principles Discuss issues relevant to cache design Describe the cache organization of the Pentium Computer Memory Systems There are key characteristics of memory… Location – internal or external Capacity – expressed in terms of bytes Unit of Transfer – the number of bits read out of or written into memory at a time Access Method – sequential, direct, random or associative From a users perspective the two most important characteristics of memory are… Capacity Performance – access time, memory cycle time, transfer rate The trade off for memory happens along three axis… Faster access time, greater cost per bit Greater capacity, smaller cost per bit Greater capacity, slower access time This leads to people using a tiered approach in their use of memory   As one goes down the hierarchy, the following occurs… Decreasing cost per bit Increasing capacity Increasing access time Decreasing frequency of access of the memory by the processor The use of two levels of memory to reduce average access time works in principle, but only if conditions 1 to 4 apply. A variety of technologies exist that allow us to accomplish this. Thus it is possible to organize data across the hierarchy such that the percentage of accesses to each successively lower level is substantially less than that of the level above. A portion of main memory can be used as a buffer to hold data temporarily that is to be read out to disk. This is sometimes referred to as a disk cache and improves performance in two ways… Disk writes are clustered. Instead of many small transfers of data, we have a few large transfers of data. This improves disk performance and minimizes processor involvement. Some data designed for write-out may be referenced by a program before the next dump to disk. In that case the data is retrieved rapidly from the software cache rather than slowly from disk. Cache Memory Principles Cache memory is substantially faster than main memory. A caching system works as follows.. When a processor attempts to read a word of memory, a check is made to see if this in in cache memory… If it is, the data is supplied, If it is not in the cache, a block of main memory, consisting of a fixed number of words is loaded to the cache. Because of the phenomenon of locality of references, when a block of data is fetched into the cache, it is likely that there will be future references to that same memory location or to other words in the block. Elements of Cache Design While there are a large number of cache implementations, there are a few basic design elements that serve to classify and differentiate cache architectures… Cache Addresses Cache Size Mapping Function Replacement Algorithm Write Policy Line Size Number of Caches Cache Addresses Almost all non-embedded processors support virtual memory. Virtual memory in essence allows a program to address memory from a logical point of view without needing to worry about the amount of physical memory available. When virtual addresses are used the designer may choose to place the cache between the MMU (memory management unit) and the processor or between the MMU and main memory. The disadvantage of virtual memory is that most virtual memory systems supply each application with the same virtual memory address space (each application sees virtual memory starting at memory address 0), which means the cache memory must be completely flushed with each application context switch or extra bits must be added to each line of the cache to identify which virtual address space the address refers to. Cache Size We would like the size of the cache to be small enough so that the overall average cost per bit is close to that of main memory alone and large enough so that the overall average access time is close to that of the cache alone. Also, larger caches are slightly slower than smaller ones. Mapping Function Because there are fewer cache lines than main memory blocks, an algorithm is needed for mapping main memory blocks into cache lines. The choice of mapping function dictates how the cache is organized. Three techniques can be used… Direct – simplest technique, maps each block of main memory into only one possible cache line Associative – Each main memory block to be loaded into any line of the cache Set Associative – exhibits the strengths of both the direct and associative approaches while reducing their disadvantages For detailed explanations of each approach – read the text book (page 148 – 154) Replacement Algorithm For associative and set associating mapping a replacement algorithm is needed to determine which of the existing blocks in the cache must be replaced by a new block. There are four common approaches… LRU (Least recently used) FIFO (First in first out) LFU (Least frequently used) Random selection Write Policy When a block resident in the cache is to be replaced, there are two cases to consider If no writes to that block have happened in the cache – discard it If a write has occurred, a process needs to be initiated where the changes in the cache are propagated back to the main memory. There are several approaches to achieve this including… Write Through – all writes to the cache are done to the main memory as well at the point of the change Write Back – when a block is replaced, all dirty bits are written back to main memory The problem is complicated when we have multiple caches, there are techniques to accommodate for this but I have not summarized them. Line Size When a block of data is retrieved and placed in the cache, not only the desired word but also some number of adjacent words are retrieved. As the block size increases from very small to larger sizes, the hit ratio will at first increase because of the principle of locality, which states that the data in the vicinity of a referenced word are likely to be referenced in the near future. As the block size increases, more useful data are brought into cache. The hit ratio will begin to decrease as the block becomes even bigger and the probability of using the newly fetched information becomes less than the probability of using the newly fetched information that has to be replaced. Two specific effects come into play… Larger blocks reduce the number of blocks that fit into a cache. Because each block fetch overwrites older cache contents, a small number of blocks results in data being overwritten shortly after they are fetched. As a block becomes larger, each additional word is farther from the requested word and therefore less likely to be needed in the near future. The relationship between block size and hit ratio is complex, and no set approach is judged to be the best in all circumstances.   Pentium 4 and ARM cache organizations The processor core consists of four major components: Fetch/decode unit – fetches program instruction in order from the L2 cache, decodes these into a series of micro-operations, and stores the results in the L2 instruction cache Out-of-order execution logic – Schedules execution of the micro-operations subject to data dependencies and resource availability – thus micro-operations may be scheduled for execution in a different order than they were fetched from the instruction stream. As time permits, this unit schedules speculative execution of micro-operations that may be required in the future Execution units – These units execute micro-operations, fetching the required data from the L1 data cache and temporarily storing results in registers Memory subsystem – This unit includes the L2 and L3 caches and the system bus, which is used to access main memory when the L1 and L2 caches have a cache miss and to access the system I/O resources

  Read the article

• How to split a string with negative numbers using ActionScript 3.0

  - by inzombiak

  I'm having trouble loading my level. I'm using Ogmo to create my level then I import it. I have no problem converting 0's and 1's into an Array, but I can't figure out how to do the same for -1's. It separates the "-" and the "1". Any help would be great. I've posted my code and the XML files below levelXML = new XML(e.target.data); playerX = int(levelXML.Entities.Player.@x); playerY = int(levelXML.Entities.Player.@y); levelGrid = levelXML.Grid; levelGrid = levelGrid.split("\n").join(""); levelTiles = levelXML.Tiles; levelTiles = levelTiles.split("\n").join(""); levelTiles = levelTiles.split(",").join(""); tileArray = levelTiles.split(""); gridArray = levelGrid.split(""); for(i = 0; i <= 34; i++) { levelArray[i] = new Array(); for(j = 0; j <= 34; j++) { if(tileArray[j*35 + i] == 0) { gridArray[j*35+i] = -1; } var currentSymbol = gridArray[j*35+i]; levelArray[i][j] = currentSymbol; if(gridArray[j*35 + i] == 1) { wall = new Wall; addChild(wall); wall.x = i*20 + 10; wall.y = j*20 + 10; } else if(gridArray[j*35 + i] == -1) { pellet = new Pellet; addChild(pellet); pellet.x = i*20 + 10; pellet.y = j*20 + 10; } } } I know the code is very dirty, but I needed a quick fix. Grid exportMode="Bitstring" 11111111111111111111111111111111111 10000000000000000011000000000000001 10000000000000000011000000000000001 10011111001111110011001111110011001 10011111001111110011001111110011001 10011111001111110011001111110011001 10000000000000000000000000000000001 10000000000000000000000000000000001 10011111001100111111100110011111001 10011111001100000100000110011111001 10000000001100000100000110000000001 10000000001111100100111110000000001 11111111001111100100111110011111111 00000001001111100100111110010000000 00000001001100000000000110010000000 11111111001100000000000110011111111 00000000000000111111100000000000000 00000000000000100000100000000000000 11111111001100100000100110011111111 00000001001100111111100110010000000 00000001001100000000000110010000000 11111111001100111111100110011111111 10000000000000000100000000000000001 10000000000000000100000000000000001 10011111001111100100111110011111001 10000011000000000000000000011000001 10000011000000000000000000011000001 11110011001100111111100110011001111 11110011001100111111100110011001111 10000000001100000100000110000000001 10000000001100000100000110000000001 10011111111111100100111111111111001 10000000000000000000000000000000001 10000000000000000000000000000000001 11111111111111111111111111111111111 Tiles tileset="Tiles" exportMode="CSV"-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1,-1,-1,-1,-1,-1,-1,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,0,0,0,0,0,0,0,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,0,-1 -1,-1,-1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1 -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1

  Read the article

• ?Oracle????SELECT????UNDO

  - by Liu Maclean(???)

  ????????Oracle?????(dirty read),?Oracle??????Asktom????????Oracle???????, ???undo??????????(before image)??????Consistent, ???????????????Oracle????????????? ????????? ??,??,Oracle?????????????RDBMS,???????????? ?????????2?????: _offline_rollback_segments or _corrupted_rollback_segments ?2?????????Oracle???????????ORA-600[4XXX]???????????????,???2??????Undo??Corruption????????????,?????2????????????????? ??????????????_offline_rollback_segments ? _corrupted_rollback_segments ?2?????: ???????(FORCE OPEN DATABASE) ????????????(consistent read & delayed block cleanout) ??????rollback segment??? ?????:???????Oracle????????,??????????2?????,?????????????!! _offline_rollback_segments ? _corrupted_rollback_segments ???????????: ??2???????Undo Segments(???/???)????????online ?UNDO$???????????OFFLINE??? ???instance??????????????????? ??????Undo Segments????????active transaction????????????dead??SMON???(????????SMON??(?):Recover Dead transaction) _OFFLINE_ROLLBACK_SEGMENTS(offline undo segment list)????(hidden parameter)?????: ???startup???open database???????_OFFLINE_ROLLBACK_SEGMENTS????Undo segments(???/???),?????undo segments????????alert.log???TRACE?????,???????startup?? ?????????????,?ITL?????undo segments?: ???undo segments?transaction table?????????????????? ???????????commit,?????CR??? ????undo segments????(???corrupted??,???missed??)???????????alert.log,??????? ?DML?????????????????????????????????CPU,????????????????????? _CORRUPTED_ROLLBACK_SEGMENTS(corrupted undo segment list)??????????: ?????startup?open database???_CORRUPTED_ROLLBACK_SEGMENTS????undo segments(???/???)???????? ???????_CORRUPTED_ROLLBACK_SEGMENTS???undo segments????????????commit,???undo segments???drop??? ??????????? ??????????????????,?????????????????? ??bootstrap???????????,?????????ORA-00704: bootstrap process failure??,???????????(???Oracle????:??ORA-00600:[4000] ORA-00704: bootstrap process failure????) ??????_CORRUPTED_ROLLBACK_SEGMENTS????????????????????,??????????????? Oracle???????TXChecker??????????? ???????2?????,??????????????_CORRUPTED_ROLLBACK_SEGMENTS?????SELECT????UNDO???????: SQL> alter system set event= '10513 trace name context forever, level 2' scope=spfile; System altered. SQL> alter system set "_in_memory_undo"=false scope=spfile; System altered. 10513 level 2 event????SMON ??rollback ??? dead transaction _in_memory_undo ?? in memory undo ?? SQL> startup force; ORACLE instance started. Total System Global Area 3140026368 bytes Fixed Size 2232472 bytes Variable Size 1795166056 bytes Database Buffers 1325400064 bytes Redo Buffers 17227776 bytes Database mounted. Database opened. session A: SQL> conn maclean/maclean Connected. SQL> create table maclean tablespace users as select 1 t1 from dual connect by level exec dbms_stats.gather_table_stats('','MACLEAN'); PL/SQL procedure successfully completed. SQL> set autotrace on; SQL> select sum(t1) from maclean; SUM(T1) ---------- 501 Execution Plan ---------------------------------------------------------- Plan hash value: 1679547536 ------------------------------------------------------------------------------ | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 | | 1 | SORT AGGREGATE | | 1 | 3 | | | | 2 | TABLE ACCESS FULL| MACLEAN | 501 | 1503 | 3 (0)| 00:00:01 | ------------------------------------------------------------------------------ Statistics ---------------------------------------------------------- 1 recursive calls 0 db block gets 3 consistent gets 0 physical reads 0 redo size 515 bytes sent via SQL*Net to client 492 bytes received via SQL*Net from client 2 SQL*Net roundtrips to/from client 0 sorts (memory) 0 sorts (disk) 1 rows processe ???????????,????current block, ????????,consistent gets??3? SQL> update maclean set t1=0; 501 rows updated. SQL> alter system checkpoint; System altered. ??session A?commit; ???? session: SQL> conn maclean/maclean Connected. SQL> SQL> set autotrace on; SQL> select sum(t1) from maclean; SUM(T1) ---------- 501 Execution Plan ---------------------------------------------------------- Plan hash value: 1679547536 ------------------------------------------------------------------------------ | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 | | 1 | SORT AGGREGATE | | 1 | 3 | | | | 2 | TABLE ACCESS FULL| MACLEAN | 501 | 1503 | 3 (0)| 00:00:01 | ------------------------------------------------------------------------------ Statistics ---------------------------------------------------------- 0 recursive calls 0 db block gets 505 consistent gets 0 physical reads 108 redo size 515 bytes sent via SQL*Net to client 492 bytes received via SQL*Net from client 2 SQL*Net roundtrips to/from client 0 sorts (memory) 0 sorts (disk) 1 rows processed ?????? ?????????undo??CR?,???consistent gets??? 505 [oracle@vrh8 ~]$ ps -ef|grep LOCAL=YES |grep -v grep oracle 5841 5839 0 09:17 ? 00:00:00 oracleG10R25 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) [oracle@vrh8 ~]$ kill -9 5841 ??session A???Server Process????,???dead transaction ????smon?? select ktuxeusn, to_char(sysdate, 'DD-MON-YYYY HH24:MI:SS') "Time", ktuxesiz, ktuxesta from x$ktuxe where ktuxecfl = 'DEAD'; KTUXEUSN Time KTUXESIZ KTUXESTA ---------- -------------------- ---------- ---------------- 2 06-AUG-2012 09:20:45 7 ACTIVE ???1?active rollback segment SQL> conn maclean/maclean Connected. SQL> set autotrace on; SQL> select sum(t1) from maclean; SUM(T1) ---------- 501 Execution Plan ---------------------------------------------------------- Plan hash value: 1679547536 ------------------------------------------------------------------------------ | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 | | 1 | SORT AGGREGATE | | 1 | 3 | | | | 2 | TABLE ACCESS FULL| MACLEAN | 501 | 1503 | 3 (0)| 00:00:01 | ------------------------------------------------------------------------------ Statistics ---------------------------------------------------------- 0 recursive calls 0 db block gets 411 consistent gets 0 physical reads 108 redo size 515 bytes sent via SQL*Net to client 492 bytes received via SQL*Net from client 2 SQL*Net roundtrips to/from client 0 sorts (memory) 0 sorts (disk) 1 rows processed ????? ????kill?? ???smon ??dead transaction , ???????????? ?????undo??????? ????active?rollback segment??? SQL> select segment_name from dba_rollback_segs where segment_id=2; SEGMENT_NAME ------------------------------ _SYSSMU2$ SQL> alter system set "_corrupted_rollback_segments"='_SYSSMU2$' scope=spfile; System altered. ? _corrupted_rollback_segments ?? ???2?rollback segment, ????????undo SQL> startup force; ORACLE instance started. Total System Global Area 3140026368 bytes Fixed Size 2232472 bytes Variable Size 1795166056 bytes Database Buffers 1325400064 bytes Redo Buffers 17227776 bytes Database mounted. Database opened. SQL> conn maclean/maclean Connected. SQL> set autotrace on; SQL> select sum(t1) from maclean; SUM(T1) ---------- 94 Execution Plan ---------------------------------------------------------- Plan hash value: 1679547536 ------------------------------------------------------------------------------ | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 | | 1 | SORT AGGREGATE | | 1 | 3 | | | | 2 | TABLE ACCESS FULL| MACLEAN | 501 | 1503 | 3 (0)| 00:00:01 | ------------------------------------------------------------------------------ Statistics ---------------------------------------------------------- 228 recursive calls 0 db block gets 29 consistent gets 5 physical reads 116 redo size 514 bytes sent via SQL*Net to client 492 bytes received via SQL*Net from client 2 SQL*Net roundtrips to/from client 4 sorts (memory) 0 sorts (disk) 1 rows processed SQL> / SUM(T1) ---------- 94 Execution Plan ---------------------------------------------------------- Plan hash value: 1679547536 ------------------------------------------------------------------------------ | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 | | 1 | SORT AGGREGATE | | 1 | 3 | | | | 2 | TABLE ACCESS FULL| MACLEAN | 501 | 1503 | 3 (0)| 00:00:01 | ------------------------------------------------------------------------------ Statistics ---------------------------------------------------------- 0 recursive calls 0 db block gets 3 consistent gets 0 physical reads 0 redo size 514 bytes sent via SQL*Net to client 492 bytes received via SQL*Net from client 2 SQL*Net roundtrips to/from client 0 sorts (memory) 0 sorts (disk) 1 rows processed ?????? consistent gets???3,?????????????????,??ITL???UNDO SEGMENTS?_corrupted_rollback_segments????,???????????COMMIT??,????UNDO? ???????,?????????????????????????(????????????????????),????????????????? ???? , ?????

  Read the article

• Error when Eclipse started and now my package explorer is empty!

  - by carpenteri

  Friends, Just a quick introduction, I'm currently learning Java, using a combination of the Head First Java book and Eclipse. Everything was going well until tonight! When I started up Eclipse tonight, I saw an error message which I didn't pay attention to (I know! I know!) and acknowledged after which the project explorer was empty where it used to contain my Head First project! After a quick "google" I found the workspace.metadata.log and the errors are shown below. The version of Eclipse I am using is: 20100218-1602 and the only plugin that I use is egit. Any help would be much appreciated. Thanks !SESSION 2010-06-08 19:24:33.841 ----------------------------------------------- eclipse.buildId=unknown java.version=1.5.0_22 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_GB Framework arguments: -product org.eclipse.epp.package.java.product Command-line arguments: -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.java.product !ENTRY org.eclipse.ui.workbench 4 2 2010-06-08 19:24:36.475 !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.ui.workbench". !STACK 1 org.eclipse.ui.WorkbenchException: Content is not allowed in prolog. at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:121) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:64) at org.eclipse.ui.internal.Workbench$49.run(Workbench.java:1895) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1890) at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183) at org.eclipse.ui.application.WorkbenchAdvisor$1.run(WorkbenchAdvisor.java:781) Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:94) ... 6 more !SUBENTRY 1 org.eclipse.ui 4 0 2010-06-08 19:24:36.475 !MESSAGE Content is not allowed in prolog. !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:94) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:64) at org.eclipse.ui.internal.Workbench$49.run(Workbench.java:1895) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1890) at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183) at org.eclipse.ui.application.WorkbenchAdvisor$1.run(WorkbenchAdvisor.java:781) !SUBENTRY 1 org.eclipse.ui 4 0 2010-06-08 19:24:36.475 !MESSAGE Content is not allowed in prolog. !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:94) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:64) at org.eclipse.ui.internal.Workbench$49.run(Workbench.java:1895) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1890) at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183) at org.eclipse.ui.application.WorkbenchAdvisor$1.run(WorkbenchAdvisor.java:781) !ENTRY org.eclipse.jdt.ui 4 10001 2010-06-08 19:24:41.442 !MESSAGE Internal Error !STACK 1 org.eclipse.jdt.internal.ui.JavaUIException: Problems reading information from XML 'OpenTypeHistory.xml' at org.eclipse.jdt.internal.corext.util.History.createException(History.java:70) at org.eclipse.jdt.internal.corext.util.History.load(History.java:257) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.<init>(OpenTypeHistory.java:199) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.getInstance(OpenTypeHistory.java:185) at org.eclipse.jdt.internal.ui.JavaPlugin.initializeAfterLoad(JavaPlugin.java:381) at org.eclipse.jdt.internal.ui.InitializeAfterLoadJob$RealJob.run(InitializeAfterLoadJob.java:36) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) ... 6 more !SUBENTRY 1 org.eclipse.jdt.ui 4 4 2010-06-08 19:24:41.442 !MESSAGE Problems reading information from XML 'OpenTypeHistory.xml' !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.<init>(OpenTypeHistory.java:199) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.getInstance(OpenTypeHistory.java:185) at org.eclipse.jdt.internal.ui.JavaPlugin.initializeAfterLoad(JavaPlugin.java:381) at org.eclipse.jdt.internal.ui.InitializeAfterLoadJob$RealJob.run(InitializeAfterLoadJob.java:36) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) !ENTRY org.eclipse.jdt.ui 4 10001 2010-06-08 19:24:50.435 !MESSAGE Internal Error !STACK 1 org.eclipse.jdt.internal.ui.JavaUIException: Problems reading information from XML 'QualifiedTypeNameHistory.xml' at org.eclipse.jdt.internal.corext.util.History.createException(History.java:70) at org.eclipse.jdt.internal.corext.util.History.load(History.java:257) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.<init>(QualifiedTypeNameHistory.java:33) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.getDefault(QualifiedTypeNameHistory.java:26) at org.eclipse.jdt.internal.ui.JavaPlugin.stop(JavaPlugin.java:602) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:843) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.stop(BundleContextImpl.java:836) at org.eclipse.osgi.framework.internal.core.BundleHost.stopWorker(BundleHost.java:474) at org.eclipse.osgi.framework.internal.core.AbstractBundle.suspend(AbstractBundle.java:546) at org.eclipse.osgi.framework.internal.core.Framework.suspendBundle(Framework.java:1098) at org.eclipse.osgi.framework.internal.core.StartLevelManager.decFWSL(StartLevelManager.java:593) at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:261) at org.eclipse.osgi.framework.internal.core.StartLevelManager.shutdown(StartLevelManager.java:216) at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.suspend(InternalSystemBundle.java:266) at org.eclipse.osgi.framework.internal.core.Framework.shutdown(Framework.java:685) at org.eclipse.osgi.framework.internal.core.Framework.close(Framework.java:583) at org.eclipse.core.runtime.adaptor.EclipseStarter.shutdown(EclipseStarter.java:409) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:200) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) ... 25 more !SUBENTRY 1 org.eclipse.jdt.ui 4 4 2010-06-08 19:24:50.435 !MESSAGE Problems reading information from XML 'QualifiedTypeNameHistory.xml' !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.<init>(QualifiedTypeNameHistory.java:33) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.getDefault(QualifiedTypeNameHistory.java:26) at org.eclipse.jdt.internal.ui.JavaPlugin.stop(JavaPlugin.java:602) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:843) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.stop(BundleContextImpl.java:836) at org.eclipse.osgi.framework.internal.core.BundleHost.stopWorker(BundleHost.java:474) at org.eclipse.osgi.framework.internal.core.AbstractBundle.suspend(AbstractBundle.java:546) at org.eclipse.osgi.framework.internal.core.Framework.suspendBundle(Framework.java:1098) at org.eclipse.osgi.framework.internal.core.StartLevelManager.decFWSL(StartLevelManager.java:593) at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:261) at org.eclipse.osgi.framework.internal.core.StartLevelManager.shutdown(StartLevelManager.java:216) at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.suspend(InternalSystemBundle.java:266) at org.eclipse.osgi.framework.internal.core.Framework.shutdown(Framework.java:685) at org.eclipse.osgi.framework.internal.core.Framework.close(Framework.java:583) at org.eclipse.core.runtime.adaptor.EclipseStarter.shutdown(EclipseStarter.java:409) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:200) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >