Search Results

Search found 5685 results on 228 pages for 'encrypted partition'.

Page 184/228 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• e2fsck extremly slow, although enough memory exists

  - by kaefert

  I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there are some problems that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg | grep sdb [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and he scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So this number of the lseeks before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if the numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. (times are in CET)

  Read the article

• Can't read directory owned by my group

  - by Jonathan

  I moved the postgres data directory to a separate partition and it works great. The directory is owned by postgres user and postgres group. d-wx------ 11 postgres postgres 4.0K 2010-06-11 08:28 data/ I added myself to the group > sudo addgroup me postgres > groups me me : me adm dialout cdrom plugdev lpadmin admin sambashare postgres And gave the group read and execute permissions to everything in the directory. sudo chmod -R g+rx ./data d-wxr-x--- 11 postgres postgres 4.0K 2010-06-11 08:28 data/ But I still can not CD or LS the directory. > ls data ls: cannot open directory data: Permission denied What beginner mistake am I making?

  Read the article

• Linux RAID0 - relocating member disk

  - by qdot

  I've got an issue I would rather handle with the array online - I am using RAID0 for temporary video storage - data that is low-cost to restore, but that is used frequently. The software array looks like this: md1 : active raid0 sdb1[2] sdc1[3] sdd1[0] sde1[1] 1953487616 blocks 64k chunks I have another partition (sda1) in this system, that I want to use to replace sdc1 (The drives are of varying age, and sdc1 is definitely the slowest one, limiting the entire array's sequential read performance to only 300MB/s). Is there a way to migrate the data from sdc1 to sda1 while the array is still online?

  Read the article

• Apache load balancer with https real servers and client certificates

  - by Jack Scheible

  Our network requirements state that ALL network traffic must be encrypted. The network configuration looks like this: ------------ /-- https --> | server 1 | / ------------ |------------| |---------------|/ ------------ | Client | --- https --> | Load Balancer | ---- https --> | server 2 | |------------| |---------------|\ ------------ \ ------------ \-- https --> | server 3 | ------------ And it has to pass client certificates. I've got a config that can do load balancing with in-the-clear real servers: <VirtualHost *:8666> DocumentRoot "/usr/local/apache/ssl_html" ServerName vmbigip1 ServerAdmin [email protected] DirectoryIndex index.html <Proxy *> Order deny,allow Allow from all </Proxy> SSLEngine on SSLProxyEngine On SSLCertificateFile /usr/local/apache/conf/server.crt SSLCertificateKeyFile /usr/local/apache/conf/server.key <Proxy balancer://mycluster> BalancerMember http://1.2.3.1:80 BalancerMember http://1.2.3.2:80 # technically we aren't blocking anyone, but could here Order Deny,Allow Deny from none Allow from all # Load Balancer Settings # A simple Round Robin load balancer. ProxySet lbmethod=byrequests </Proxy> # balancer-manager # This tool is built into the mod_proxy_balancer module allows you # to do simple mods to the balanced group via a gui web interface. <Location /balancer-manager> SetHandler balancer-manager Order deny,allow Allow from all </Location> ProxyRequests Off ProxyPreserveHost On # Point of Balance # Allows you to explicitly name the location in the site to be # balanced, here we will balance "/" or everything in the site. ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=JSESSIONID </VirtualHost> What I need is for the servers in my load balancer to be BalancerMember https://1.2.3.1:443 BalancerMember https://1.2.3.2:443 But that does not work. I get SSL negotiation errors. Even when I do get that to work, I will need to pass client certificates. Any help would be appreciated.

  Read the article

• Development environment clean installation

  - by ruigoncalves

  Hi there! I'm about to install a new and clean development environment. To accomplish that, I would like a Windows operating system (possibly Windows 7) and a Ubuntu one (possibly the most recent, 10.04). To allow sharing data between the two operating systems, I'm thinking to create a partition (workspace, for example) with using NTFS to format it and that be automatically mounted by Ubuntu. In terms of the partitioning schema, how would be better to organize the previous mentioned partitions? Thanks in advance, Best regards!

  Read the article

• Where are Wireless Profiles stored in Ubuntu

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Setting per-directory umask using ACLs

  - by Yarin

  We want to mimic the behavior of a system-wide 002 umask on a certain directory foo, in order to ensure the following result: All sub-directories created underneath foo will have 775 permissions All files created underneath foo and subdirectories will have 664 permissions 1 and 2 will happen for files/dirs created by all users, including root, and all daemons. Assuming that ACL is enabled on our partition, this is the command we've come up with: setfacl -R -d -m mask:002 foo This seems to be working- I'm basically just looking for confirmation. Is this the most effective way to apply a per-directory umask with an ACL?

  Read the article

• How does rsync --daemon know which way it is being run?

  - by Skaperen

  I am wanting to run rsync over an SSL/TLS encrypted connection. It does not do this directly so I am exploring options. The stunnel program looks promising, although more complicated than designed due to the need to hop connections with the -r option. However, I do find there is a -l option to run a program. I am assuming this works by having two processes, one to carry out the SSL/TLS work, and one to be the worker which the client is communicating to. These would then communicate by a pipe pair or two way socket between them. What struck me as odd when I surveyed a number of web pages to see how to properly set this up is that whether running as a standalone daemon, or under a super daemon like inetd, the arguments for rsync are the same. How does rsync --daemon know whether it should open a socket and listen on it for many connections, or just service one connection by communicating with the stdin/stdout descriptors is has when it starts up (which really would go through the extra process to handle the encryption, description, and SSL/TLS protocol layer)? And then I need to find a way to wrap the client to have it do SSL/TLS in one simple command (as opposed to connection hopping that stunnel seems to favor).

  Read the article

• Can't Read/Write the Hard disk used in NAS

  - by mgpyone

  I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

  Read the article

• need help in backing up 2 partitions to flash drive(Acronis)

  - by Nrew

  I'm trying it on virtual box and installed Acronis 2010. The backup was successful but when I checked on the backup which is on my flash drive. Here's my problem: Ive installed firefox before the backup, but the program files folder in the flash drive has no folder called firefox. How do I restore the the 2 partitions using the backup. What I did was to: Go to tools & utilities in Acronis then chose clone disk. Selected the source and destination(flash drive). Then I restart, the backup began. First with the first partition which has xp installed and the 2nd was vista lite. What do I do to restore it: I only got these folders on the root of the flash drive: Documents and settings Program files Windows BOOTSECT.BAK

  Read the article

• Why does compressing and decompressing my SSD hard drive free up space?

  - by Paperflyer

  I bought an SSD (SandForce 2), created a tiny 25GB partition on it for Windows and installed Windows 7 64-bit. In order to free disk space, I enabled compression on the drive using the Properties entry in the context menu for the drive in Explorer. Prior to compressing I had around 5GB of free space. After compression I had 4GB, so compression was not working for me. I figured this might have happened because of the built-in data compression of the SSD. I decompressed the files again - after decompression, it left me with 7GB of free space! Better yet, after restarting, I had 10GB. What is happening here?

  Read the article

• Boot Camp: is it possible to restart directly to Windows from Mac OS X?

  - by Jonik

  With the Boot Camp tools installed on Windows, there's an option for rebooting directly to Mac OS ("Restart in Mac OS X" from Boot Camp system tray item). But is this possible in the opposite direction? In other words, instead of the procedure 1) "Restart", 2) wait for OS X to shut down, 3) hold Option key (?), and 4) select the Windows partition, can I tell my Mac to restart so that Windows is selected on the next boot? Something like "Restart in Windows" which would let me bypass steps 2-4. NB: I want to keep Mac OS X as the default OS; I'm just looking for a convenient shortcut when normally running OS X and occasionally wanting to boot to Windows.

  Read the article

• Help looking before I leap! I need expert guidance...

  - by Ellen Reddick

  27" iMac running win7 under bootcamp (slick! ). I have Access 2003 program with files linked through ODBC used by 4 installations (all with Access 2003 installed). I want to buy Access 2010 and try it under virtual PC (under Bootcamp). Will it work (since I have to install the ODBC drivers)? If I decide after this trial that I like what it does, can I then install it under the Windows 7 bootcamp partition (with or without uninstalling the virtual PC) without using up the 2nd allowed installation? Also, I see that MS allows an Office Pro 2010 trial download good for 60 days. Would this work in Windows 7 Virtual PC and would it be a better way to go, followed by a legitimate purchase of Access 2010 for the Windows 7? This is not an Access programming question--I realize there may be some tweaks necessary in the program to run it under 2010 and I can handle that part.

  Read the article

• How to create Restoration Partion?

  - by Fellknight

  For some time now, when buying new computers (laptops in particular) from big name brands-like DELL, HP, TOSHIBA, etc.-most of them come with a "rescue" or "restore" partion instead of installation CD/DVD. Said partitions have everything needed to rebuild the factory installed OS, unfortunately they also include all crapware that the OEM installed on the machine. Is it there a way to custom create such a partition with out all the useless software included?. They seem quite appealing considering they only use about 10GB-20GB of space and offer the pretty much the same functionality as a complete system image/backup.

  Read the article

• Is there a program that will show a tree of the differences in two file trees?

  - by Huckle

  In windows I manually back up from time to time by formatting my external drive and copying the contents of my data partition over. Inevitably there is a difference in the number and size of the files copied because of system files, etc. Is there a program that would diff two directories recursively and compile the differences into a nice GUI tree that I could peruse (preferably filter) to ensure that everything I want made it over to the drive? It should only show files that are not in both directories. (Also, please ignore the inadequacy of my backup solution)

  Read the article

• 32 bit programs can't access Internet in Windows 7 64 bit

  - by korona

  I recently got a new ASUS laptop with Windows 7 Home Premium pre-installed. It worked OK for a while but a couple of days ago, suddenly I couldn't access the Internet any more. After narrowing down the problem, I've reached the conclusion that what's happened is that 32 bit programs are suddenly not able to use the Internet, but 64 bit applications work just fine. Examples of programs that DON'T work any more: Google chrome Firefox Internet Explorer 8 World of Warcraft Examples of programs that DO work: Internet Explorer 8 (64 bit) ping (command line) nslookup (command line) ftp (command line) I'm pretty sure that those command line apps are 64 bit native. A re-install of Windows using the recovery partition on the laptop did fix the problem temporarily, but now it's back again. And I seem to be stuck between a rock and a hard place getting someone to take the responsibility for this; the vendor says to talk to ASUS, ASUS says it's a software issue, and Microsoft doesn't give support on OEM licenses... Does anyone know how to solve this issue?

  Read the article

• Visual Studio Development on Virtual Box, Boot Camp, or VMWare Fusion

  - by Eli

  I currently have a Mac, 2ghz and 2 gigs of ram, running OS X Leopard and Virtual Box with a Windows 7 Pro 32bit virtual machine. Performance on the virtual machine is fine for minor tasks but is very clunky while trying to multi-task or develop in Visual Studio 2008. What would be my best option for being able to use Visual Studio, keeping cost and time in mind? 1) Upgrade ram to 4 gigs ($100). Will this really improve my performance enough to use Visual Studio in a Windows 7 vm? Or am I just wasting time/money? 2) Reinstall/restore Windows 7 disk image as a Boot Camp partition. I assume this should improve my performance, yes? 3) Purchase VMWare fusion instead of VirtualBox. Does Fusion require less resources to run? I am open to any suggestions. Thanks in advance

  Read the article

• Can a power loss break an hard disk?

  - by dag729

  Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

  Read the article

• Problem with Windows Boot Manager after using GParted

  - by Cenoc

  I Get the follow: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, Contact your system administrator or computer manufacturer for assistance. Status: 0XC0000225 Info: The boot selection failed because a required device is inaccessible. After I tried to expand the Windows partition. I dont know where I put the Windows 7 CD and I was wondering if anyone knew of any way of fixing this problem? I'm guessing I deleted something I shouldnt have deleted....... I actually wanted to get some more space at the expense of the recovery drive. Thanks in advance!

  Read the article

• RAID 1 after install and two controlers

  - by jfreak53

  I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

  Read the article

• How to automatically take daily HDD backup?

  - by user13107

  I think my HDD might have crashed. I don't want to lose data if this happens again. I have dual boot Windows/Ubuntu system. What is the best way to backup data and other software settings in Ubuntu? I don't care much about Windows partition, important stuff is in Ubuntu. I have 1 Tb external HDD (laptop HDD is of 500 gb total). One way would be to run rsync every day (or via cronjob) to backup everything to external HDD. What might be better ways of achieving this (backup)? Also are instant backup software recommended? Are there any disadvantages of instant backup as opposed to daily rsync?

  Read the article

• Minimal backup for Windows 7 system recovery

  - by JIm

  There might not be an answer to this, but for a home Win7 system, what files/directories must be backed up to recover after a windows crash? I can reinstall software, and I keep data files elsewhere. When I use acronis home backup software to backup my "critical" files it seems to choose the entire partition. Updates are mostly browser cache files and the like. Or, after a crash, should I just reinstall windows. I dread the hours of windows updates that would require. Thanks.

  Read the article

• Sendmail Configuration for Exchange Server

  - by user119720

  i need help for sendmail configuration in our linux machine. Here the things: I want to send email to outside by using our exchange server as the mail relay.But when sending the email through the server,it will response "user unknown".To make it worse, it will bounce back all the sent message to my localhost. I already tested our configuration by using external mail server such as gmail and yahoo,the configuration is working without any issue and the email can be sent to the recipient.Most of the configuration of my sendmail is based on here. authinfo file : AuthInfo:my_exchange_server "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" AuthInfo:my_exchange_server:587 "U:my_name" "I:my_email" "P:my_passwd" "M:PLAIN LOGIN" sendmail.mc : FEATURE(authinfo,hash /etc/mail/authinfo.db) define(`SMART_HOST', `my_exchange server')dnl define('RELAY_MAILER_ARGS', 'TCP $h 587') define('ESMTP_MAILER_ARGS', 'TCP $h 587') define('confCACERT_PATH', '/usr/share/ssl/certs') define('confCACET','/usr/share/ssl/certs/ca-bundle.crt') define('confSERVER_CERT','/usr/share/ssl/certs/sendmail.pem') define('confSERVER_KEY','/usr/share/ssl/certs/sendmail.pem') define('confAUTH_MECHANISMS', 'EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') TRUST_AUTH_MECH('EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN') define('confAUTH_OPTIONS, 'A')dnl My first assumptions the problem occur is due to the authentication problem, as exchange server need encrypted authentication (DIGEST-MD5).I have already changed this in the authinfo file (from plain login to digest-md5 login) but still not working. I also can telnet our exchange server.So the port is not being blocked by firewall. Can someone help me out with this problems?I'm really at wits ends. Thanks.

  Read the article

• Windows: Should I install Server or stick with regular?

  - by stalker92

  I hope somebody can help me solve my dilemma. I have my home PC (using Windows 7) which I use for both work and leisure (gaming, surfing, movies etc.) I tend to never turn it off, only when I must reboot because some installation requires me to or when the power gets lost. But, sometimes Windows starts acting weird (usually after the long period of system uptime), per example eats up randomly all the space on my system partition etc. which is solved after the reset by itself. I was thinking to switch to Windows Server, I guess that it is more optimized for long uptime, well, obviously it is meant for use on servers. Can somebody with more experience with this help me decide is it worth it, will it solve these issues connected with long uptime periods? Thanks in advance.

  Read the article

• USB Format Error

  - by Dan Finan

  I'm having a real headache trying to reformat a USB drive. Initially it had a 200mb EFI partition and it caused the drive to disappear altogether. Since then I ran the CMD and wiped the disk using 'diskpart'. It took a few attempts but it finally cleaned the drive. Since then it has reappeared under (:E) however I am unable to access the drive and Windows is preventing me from reformatting it. I am just presented with 'Windows was unable to complete the format'. It's now acting like a CD drive instead of removable storage. I've tried going through Disk Management and I'm presented with the same error. I've removed the USB controllers from Device Manager - when the drive is connected again it re-installs the drivers and acts the same way. Any help given will be greatly appreciated, thank you. (Windows 7 machine)

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >