Search Results

Search found 5348 results on 214 pages for 'mouse'.

Page 184/214 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

  • Latitude D600 USB port problem

    - by Moab
    Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

    Read the article

  • Solutions on how to use an OS X calendar as a more perfect time tracking solution for 5-10 users in a small agency?

    - by jnthnclrk
    I really like OS X's iCal. Entering events is easy with the mouse and it also gives you a very real visual sense of how long tasks take to complete. We often work remotely in our organisation, so we use a few shared calendars between key individuals to provide us with an overview of hours worked, availability & schedule conflicts without too much disruption to our various, hectic workflows. It really is a neat solution, especially on shared tasks. How many times have you tasked a remote colleague and then lost the thread on whether that task was completed or not? With shared calendars you get a much clearer idea of what your people are working on without having to pick up the phone or compose a chat. However, there are a few areas where this approach fails... iCloud syncing often needs to be re-jiggered The "view only" option on shared calendars does not seem to work, which makes all shared calendars editable by others There is no decent reporting with this workflow There is no task categorisation or tagging Things get very busy in iCal when working with more than 2 shared calendars I've looked at a few task management apps like Basecamp and Harvest, but nothing appears to let me edit my calendar natively and then sync with a 3rd party. Interested in solutions to improve the above workflow and enable us to elegantly increase the amount of users.

    Read the article

  • What switch should we use for PCoIP?

    - by Jay R.
    We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

    Read the article

  • Windows 8 install app for multiple user accounts

    - by Robert Graves
    I purchased Adera episode 2 intending to play through it with my son. We each have our own user account on the same PC. When my son logged in, he was prompted to purchase the app which I had already purchased, installed, and played on the same PC. So I checked the Terms of Use. After selecting an app in the store, there is a Terms of Use link on the left side under the Install button. It is almost impossible to identify it as a link unless you put your mouse over it. The Terms of Use are standard across all apps in the store, not specific to particular apps. The terms of use indicates that the app may be installed on up to five devices, but says nothing about multiple user accounts on those devices. However, this Microsoft blog article indicates that it is allowed. Say, for example, that your family has a shared PC. You have previously used your Microsoft account to purchase a game that all your kids like to play. You can install it for each of your kids by having each of them sign in to their Windows accounts on the shared PC, then launch the Store and sign in to the Store using your own Microsoft account. There, you’ll see all your apps and you can re-install the app on your kid’s Windows account. Installing apps on multiple user accounts on a shared PC still only counts as one of the five allowable PCs where you can install apps. So I have two questions: Is it permissible under the Terms of Use to install the app under multiple accounts on the same device? If so, how do I do so given that my son has already signed into the store using his own Microsoft account.

    Read the article

  • Excel controls not visible for certain users

    - by Nossidge
    One of the users of an Excel program I've written is having a weird problem. None of the control objects (Command Button, ComboBox, etc.) are visible to him when he opens the file on his laptop. He is using Excel 2003, the same version I used to create the program, and enables macros using the pop-up when the file loads. I have Googled this, and have found these people who seem to be having the exact same problem, with various versions of Excel. Unfortunately, none of their questions were answered. I can't really explain it any better than this user: If I enter design mode and pull a control from the control toolbar onto a sheet all I see are the drag handles. When not in design mode I have to feel around with the mouse and can click the button which executes the button click code correctly and opens another sheet where again I have to feel around for the buttons to return me to the original sheet. The button I managed to click is now visible but as soon as I click anywhere on the sheet it disappears. I have verified that the visible property of the buttons is set and that the Show All Objects on the Options View tab is selected. If I pull buttons from the Forms toolbar onto a sheet they are visible. If I try to find Objects using F5 when not in design mode Excel reports no objects on the sheet. So, Super Users, can you help? UPDATE: Thanks for your replies, but much like the person in the ozgrid link, the problem has gone away. Not sure why it went, but I can confirm that the user rebooted again and also started up other Excel files that didn't contain controls in the interim. Perhaps that fixed it, or maybe it'll be back again. I'll keep udating with progress, and close if the problem doesn't reoccur for the next few days. Thanks again.

    Read the article

  • After RAID failure SBS 2008 issues logging in and Exchange store does not mount

    - by Josh R
    today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

    Read the article

  • Windows Vista freezes

    - by Kakurady
    Windows Vista (32-bit) would randomly freeze on my computer, usually 15-30 minutes after login but can happen just after login. All applications would stop responding and the hard drive will not make any sound, and after a while, the mouse cursor will also stop moving. I dual-boot Ubuntu, and that still works fine. It started with the computer freezing when loading Team Fortress 2. Alt-Tab and Ctrl-Alt-Del have no effect, and the hard drive does not make any sound. I tried to verify the game data using Steam and that freezes the computer too. So I stupidly reinstalled the game. Now the game doesn't freeze when it starts, but instead the whole computer randomly freezes. This computer is a Dell XPS M1530 with a 320GB (298GiB) drive (WDC WD3200BEVT-7) split 5-ways, with Windows and Linux a partition each, one more for Linux swap space, and another two partitions for Dell diagnostic program and factory image and drivers. There was once where the hard drive would make clicking noises all day, and only stopped when I rebooted the computer. Since then, the BIOS diagnostics would fail the drive (for "self-test log contains previous errors") whenever ran. (The on-disk diagnostics cannot be run because I overwrote the MBR with GRUB.) Naturally, I thought the hard drive could be the problem. CHKDSK found one bad sector, but this seems to have no effect. System File Checker found two protected files with wrong hashes, one is some kind of IE manifest, and the other is a tcpmon.ini. Neither of them can be restored because their back up copy also have wrong hashes. Nothing about system failures in the event viewer. What should I do next?

    Read the article

  • PCI configuration method error (Linux Kernel)

    - by user326580
    (I'm not sure if here is the best place for that question, so I will be pleased if anyone suggests me a more proper forum for that.) I'm trying to install Ubuntu 12.04.4 in a netbook (from an usb), but the kernel stops very early in initialization process. After two days of research, I've found that it boots with the parameter pci=conf2 but not with the default conf1 method. Nevertheless, after kernel boot, it seems that Ubuntu can't find usb devices and I'm not be able to install it. Trying with Debian, its a graphic installer and I found that the mouse isn't working neither.I think pci devices are not working. I tried about 50% of kernel pci boot options in the kernel-parameters file (in conjunction with the implicit default conf1) without luck. Any suggestions? PS: The problem is the same with kernel 2.6 or 3. (In Spanish) No estoy seguro si éste es el mejor lugar para esta pregunta, por lo cual estaré encantado si alguno me sugiere un mejor lugar para ella. Estoy intentando instalar Ubuntu 12.04.4 en una netbook (desde un usb), pero el kernel se detiene muy temprano en la inicialización. Después de dos días de investigar, encontré que arranca con el parámetro pci=conf2 pero no con método default conf1. Sin embargo después de que el kernel arranca, parece que Ubuntu no logra encontrar los dispositivos usb y no puedo instalar el sistema. Intentando con Debian y su instalador gráfico, encontré que el ratón tampoco funcionaba, así que pienso que los dispositivos pci no están funcionando. Intenté con aproximadamente el 50% de las opciones de arranque del kernel para pci (en conjunción con el método implícito conf1) sin suerte. Alguna idea? PS: El problema es el mismo con el kernel 2.6 o 3.

    Read the article

  • 64-bit Windows 7 gets stuck on logo screen on bootup

    - by Richard B
    I've had a PC running Windows 7 in my office which I'm not using at the moment (cause I'm working elsewhere as a consultant atm), I'm only accessing the PC using Team Viewer (http://www.teamviewer.com/) which means the PC has been running for quite some time now. I've restarted it maybe twice a week though. A few days ago I couldn't access it using Team Viewer and when I got to the office the screen was black with only the mouse pointer showing. The PC has four hard disks, three of them (all 1Tb) is using RAID 5. This is what I've done so far: I reboot and everything seems to load correctly. I get to a screen that gives me two choices - boot Windows normally or perform a startup repair. Choosing to boot Windows only gets me to the Windows 7 logo screen which only animates over and over again. Choosing to repair gets me to the repair screen that "checks for problems" and then it gets stuck on the "Attempting repairs..."-screen (I let it run for about 24 hours before giving up). What is the next step to take? I don't have any backups and no system restore points saved. I can access files and folders through a terminal window using a Windows 7 DVD so I guess nothing is lost yet... Please help me, thanks!

    Read the article

  • Remote Desktop leaves host unresponsive

    - by Jeff Dalley
    I have my desktop PC at home set up to accept remote connections, and I often connect to it from work on my laptop via mstsc.exe. However, every time I remote to it, I find when I go home that despite the monitor being on - it's not receiving an image and it looks as though the computer is hibernating/asleep. I basically have to restart it whenever I get home and I know there's an answer for why its doing this. More details: When exiting the remote session, I have tried both logging off the account, and closing the RDP window without logging off; both give the same result. When I get home to the desktop I of course try moving the mouse, ctrl+alt+del to see if its responsive to restart, multiple key-press to see if I can get any audio out of it; It seems pretty obvious its sleeping/hibernating in some way: Nothing happens in any of these cases and a physical restart is necessary. Both desktop and laptop are running Windows 7 Ultimate. I'm thinking it really is sleeping/hibernating it, and I'm not sure why because left alone my desktop's power options are set to never turn off the HDD or change its state - I leave it on 24/7. This could be a stupid error on my part but I just can't see it! Thanks.

    Read the article

  • Window too big to fit the screen!

    - by syockit
    I'm using Windows 7 on a 8.9' monitor with 1280x768 screen resolution. Using the might of arithmetics, I'm able to determine that my dpi (actually ppi) should be 167. Win7 is really helpful in that it doesn't have to restart to apply new dpi settings, unlike its predecessors (though I'd rather it applies straight away). The problem with small monitors in Windows is that when you come across windows too big to fit the screen, you can't move the title bar far above it. In X window managers I used in the past, you could alt-drag the window to anywhere you want, but in Windows, even if you alt-space and select move, it will automatically push the window back until the title bar is visible. I'm looking for a solution that either: allows me to move window freely without regard to titlebar visibility, or attach a scrollbar to existing window, or EDIT: create virtual desktops that allow me to span windows over 2 desktops, or EDIT 2: allow me to set larger virtual resolution, then pan & scan. EDIT 3: I found some progs that might do some of the above: 1) AltDrag allows me to drag, resize using alt and left/right mouse button. Neat! Best solution so far. 2) GiMeSpace Desktop Extender is supposed to allow me to scroll desktop. Didn't work. The other new version, GiMeSpace Ultimate Taskbar worked, but it destroys my Superbar, replacing it with its map.

    Read the article

  • Graphics artifacts/distortion with Win7 and nVidia

    - by Gepard
    Problem I encounter is rather hard to describe, so I provide a screenshot: http://dl.dropbox.com/u/1732760/video-distortion.png As you can see there are some horizontal stripes in random colors. These stripes appear sometimes in all windowed apps, games and on the desktop too. They tend to stay in place until I refresh window (or force it to to redraw by for example minimizing and maximizing again). They also tend to appear in the same place and shape multiple times, even if they disappear, it's very likely they will be again in the same place after a while. These artifacts do not blink or change if computer is idling. If I don't touch anything, do not use mouse, they will stay in place forever (unless some app redraws its window on its own). I first encountered this problem some weeks ago. Back then I thought it might be cooling problem, so I took out the graphics card, removed dust from the radiator and fan and put it into PC back. I also ran some stress test using Furmark (peak tempearature was ~65C) to see if the problem becomes more intense if the card gets hotter, but suprisingly no artifacts whatsoever appear during the stress test. Graphic card is Galaxy GeForce 7300 GT with DDR3 memory, was never overclocked. Drivers are the latest, from Nvidia site. OS is Windows 7 64-bit, updated. AMD64 3000+, 2GB RAM. I'm running a dual monitor setup with 2 19'' Samsung LCDs and problem is on both, so I assume it's not a monitor or cable issue.

    Read the article

  • How do I prevent my computer from freezing when it starts to swap?

    - by cdauth
    I work as a Java programmer, so I often have to run several programs at the same time that consume a lot of memory. When my memory is full and Linux starts swapping, my computer almost completely freezes. I can see that it is heavily writing on the hard-disk and everything reacts really slowly, often not at all. Moving the mouse in X sometimes doesn’t work at all, sometimes it has a delay of several seconds, clicking usually has a delay of several minutes. Sometimes it is possible to change to the TTY (with a long delay), there I can usually type without delay, but when I try to log in, it takes several minutes after typing in the user name until the password prompt appears, and usually an error message appears that tells me that the login timed out. So the only possibility is usually to restart the computer. I noticed that other intensive writing to the hard disk also significantly slows down my computer. Sometimes, I used rsync to limit the bandwidth when I copied files around on my own computer, as else the system would be almost unusable. How can this be? At the moment it seems more useful to me to completely turn off swapping. That might crash some processes, which is unfortunate, but the alternative at the moment is to crash all processes by turning off my computer. I am using Gentoo Linux with kernel 3.6.2-gentoo, I have a 10 GB swap partition on a HDD.

    Read the article

  • Computer freezes after watching Youtube videos

    - by Roberts
    I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

    Read the article

  • Sudden "No Signal" in HDMI-DVI connection

    - by nazikus
    Yesterday I have connected external display Asus VW192C to my laptop Dell XPS 14-L421X via HDMI-to-DVI-D cable. And it worked perfectly fine from start. The day after, Asus screen went blank showing "No signal". Every time I connection/disconnection cable or power off/on the display it says "No signal". And I didn't change any system configurations meanwhile. To troubleshoot the problem, I have tried to connect laptop to TV (hdmi-to-hdmi) - it was fine. I've tried to connect a different laptop to the display via the same cable - worked fine as well. So its obviously something on system level, either Windows or graphics drivers. Also it seems that Windows still see the external display (I can move mouse pointer away from the main screen in Extended mode), but there's just no signal. Any ideas? What else to try? PS. My laptop has 2 graphics cards - GeForce 630M and Intel HD 4000 using NVidia Optimus technology. I have updated to latest Intel and NVidia drivers, still didn't help. PPS. Although I shouldn't have updated (from Intel support): "our Intel generic graphics drivers from the Intel website do not support using both Intel Graphics 4000 and NVidia GeForece GT630M". Nevertheless, it should not affect connectivity to additional display.

    Read the article

  • Hibernate & Sleep broken after IE 9 RTM installation in Windows 7 x64.

    - by AKa
    I have a question about hibernation. I installed Internet Explorer 9 RTM x64 on my Windows 7 x64 SP1 desktop machine. After this, computer don't entry the hibernation or (hybrid) sleep state properly. After I hibernate the computer the monitor become blank screen and the keyboard and mouse are inactive. But the machine is still running and there isn't any possibility to switch them off as only with power button. But this is recognized on next start as ineligible because of log entry with message “The previous system shutdown at xx:xx:xx on ?xx.?xx.?x was unexpected“ and menu with safe mode option. I’m clearly not sure if it has something to do with Internet Explorer installation, but I’m definitely guaranteed that before of this I never had some problems with hibernation or (hybrid) sleep. In Windows logs isn’t something suspect. I switched the hibernation off and on, installed new drivers for mainboard, graphic and network card, checked the hard disk, nothing was helpful. This is really sad, beacuse I don't like to switch the computer completely off because it takes longer to boot. Any suggestions?

    Read the article

  • Change the background color of selected text in Google Docs to increase readability [migrated]

    - by gene_wood
    How can I override or change the background color of text selected in Google Docs? It is difficult for me to see the difference and I would like to increase the contrast or difference. After Google restyled Google Docs last year (or earlier this year), I've been unable to see selected text. It's possible this is a visual deficiency with my eyes. In Google Docs, under both Google Chrome (17.0.963.83 (Official Build 127885) m) and Firefox (11.0), when I select text inside a Google Doc, the selected text has a background of color #d6e0f5. Compare this to the default browser background color of #2f65c0. (I determined the color of the selected text background by taking a screenshot and using the color picker tool in Photoshop). I've tested this using a brand new Firefox profile as well as google chrome profile. Here's a section of a screenshot showing the selected text : I've tried using a userscript to override the CSS to go back to the default text selection color using the "Stylish" plugin with this css : ::selection { background:#2f65c0; color:#ffffff; } ::-moz-selection { background:#2f65c0; color:#ffffff; } ::-webkit-selection { background:#2f65c0; color:#ffffff; } This code works on other sites, but I'm unable to get it to work on Google Docs. (I tested on other sites but applying the userscript to a different domain and using bright yellow instead of the default dark blue #2f65c0.) When you use Google Docs, do you have the same color background for selected text or something different? (To test this, browse to docs.google.com , create a document, type text into the document, select the text with the mouse by dragging over it, take a screenshot, load the screenshot up in an image editor and determine the background color of the selected text.) This color differential (between light blue #d6e0f5 and white #fffff) may be easy to see for others and the problem lies with my eyes.

    Read the article

  • Touchpad scroll slow and jumpy

    - by IR
    I have a laptop with a synaptics touchpad running on win7 x64. When i use the scrolling region of the touchpad in some applications, for example in Visual Studio 2008, Notepad and Windows Media Player 12, the scroll is very slow. If i pull the edge of the touchpad slowly the program will scroll one row at a time(regardless of the number of lines-settings in the mouse configuration). If i pull the edge quickly though, the program will instantly jump like 20 rows making it way too fast. In some applications, like Firefox, the scrolling work as expected. Changing the scrollspeed-setting for the touchpad does not help. If you make it slower it doesn't do the 20-row jump but then it's horribly slow and if you try to make it faster it will do the jumps all the time. I have tried both synaptics generic drivers and the "special" drivers that HP provides but they both have the same problem (except that the generic one can't adjust the scrolling speed, even though that didn't help anyway). With windows generic drivers the scrolling region doesn't even work. Other mice i've tried with scrollwheel work as they should do.

    Read the article

  • Did Adobe Photoshop just killed my Graphics Card for good?

    - by user6004
    I was working with Adobe Photoshop, just some regular work, when I came to edit a PSD file and change the text of some layer, when all of a sudden the PC froze. No mouse, screen is frozen, keyboard strokes aren't getting me anything, no Task Manager, nada. So I rebooted my PC, and then something quite terrifying appeared before my eyes. It was not the Checkdisk utility that was launched, that made me terrified (by the way, that reboot damaged the partition table of an external HDD that was connected at the time to my PC, but that's another story). It was the screen itself. Please have a look. So after Checkdisk finished and Windows loaded, I noticed that the resolution was not right. Instead of 1440x900 which I had set, it was 1280x1024. When I went to change it back, I had no option to change back to my old resolution, and has only 3 other general resolution properties, as if my Video Card (GeForce 8800 GTS btw) was not recognized. And what do you know, in the Device Manager it appeared with an exclamation mark. Inside the hardware, it said this: Windows has stopped this device because it has reported problems. (Code 43) Uninstalling the drivers, downloading the newest drivers from NVIDIA and installing them did not work. It always comes back to this. So, do you have any advice before I go out and buy a new graphics card? I thought this was the only option left, but maybe the experts at Super User can help me out. By the way, the dotted screen appears after every reboot, and I see the dots when the ASUS Motherboard screen shows up at boot. Thanks in advance.

    Read the article

  • Install Peppermint OS three on Asus EeePC

    - by Kithoth
    I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

    Read the article

  • Oracle Linux screen freezes during installation

    - by Fearless
    I was installing Oracle Linux 6.4 on a server, and the screen suddenly froze. Here were the previous steps: I put in the disk, clicked install, checked the disk (no errors), did pre-install setup (clock, root password, host+domain name, etc.), configured two 40GB hard drives in a RAID1 array (no swap, 3100mb encrypted raid partitions, ~100mb ext4 partition mounting to /boot, encrypted ext4 RAID device with mounting to /), selected packages, hit continue. The system did its short preinstall processes, then when to the main installation screen with the long status bar. The installer proceeded like always, but around package 250 out of ~1000, the screen suddenly went black with a text cursor in the upper left corner of the screen and the mouse cursor in its previous place. Neither cursor moved and the only thing that triggered a response was a ctrl-alt-delete that rebooted it. I have run this in VMs before without this issue. Memtest hasn't reported anything, and the media check went smoothly. The machine has supported Ubuntu server without issues before. Any ideas? I have tried booting after that, but the grub bootloader tries to find fd0 for some reason (I have no idea why it would search for the floppy disk). UPDATE My server successfully installed, but won't boot up. I think that, for some reason, it is still using the old bootloader from the previous installation. Any ideas on how to fix that?

    Read the article

  • Why is my browser using so much memory?

    - by Steve
    Hi. I've recently had problems with Firefox running very slowly when I have many tabs open; say 20 tabs. My whole system would slow down. I decided to give Google Chrome a try, and it started out fine. But lately I am finding that it too, slows down my whole system. Looking at Task Manager, chrome.exe is using about 250MB of memory in about 6 different entries in task manager. However, when I shut Chrome down, memory usage is reduced by about 600MB. How can this be? (shows drop in memory usage after ending Chrome.) When my system locks up with Chrome having many tabs open, it takes 10 seconds to load the Start Menu, 10 seconds to expand All Programs, and each folder and subfolder, and 30 seconds for the program to be highlighted under my mouse. It also takes 10 seconds to switch to Notepad. Why is Chrome appearing to use so much more memory than Task Manager indicates? Why is my pagefile being used when I have around 1.1GB of memory? Can I set Chrome to run in RAM and not in the pagefile? How can 20 tabs use 600MB? That's 30MB per tab. Thanks for your help.

    Read the article

  • My Hard Drive isn't Working

    - by MeCB
    I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

    Read the article

  • How to tell Linux to explicitly swap out main memory of suspended process?

    - by Vi
    I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

    Read the article

  • Good support to multiple desktops AND multiple monitors in Linux (Ubuntu)?

    - by Somebody still uses you MS-DOS
    I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminal in my Linux environment. Nowadays I have 4 worspaces: Corporate management (e-mail) and corporate messenger; Work (Documents, Requisites) Dev (Development, All gVim windows, terminal and Firefox for development) Personal (Personal stuff: personal e-mail, delicious, twitter and so on) Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea). I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example. My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. Does Linux (Ubuntu 10.04 Lucid Lynx) support this envisioned setup? If so, how?

    Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >