Search Results

Search found 6374 results on 255 pages for 'parent'.

Page 184/255 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• ubuntu 10.04 logs itself out overnight

  - by Corey

  Every night when I leave work, I lock the screen via ubuntu's "power" button in the top right hand panel. When I come to work in the morning, I'm greeted with the log-in screen. This doesn't happen every night, but most. I'm running ubuntu 10.04 on a Dell inspiron. I've included some HW specs, and also dmesg output. Please let me know what other logs may be useful. thanks! Corey ~$ dmesg [20559.696062] type=1503 audit(1285957687.048:16): operation="open" pid=6212 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [21127.951621] type=1503 audit(1285958255.300:17): operation="open" pid=6390 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [291038.528014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.528025] render error detected, EIR: 0x00000000 [291038.528042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973891 at 22973890) [291038.828014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.828023] render error detected, EIR: 0x00000000 [291038.828042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973894 at 22973890) ~$ lspci -vv 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at dc00 [size=8] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 log$ tail -n 15 Xorg.0.log.old for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) Power Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) USB Optical Mouse: Close (II) UnloadModule: "evdev" (II) Dell Dell USB Entry Keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) AIGLX: Suspending AIGLX clients for VT switch ddxSigGiveUp: Closing log

  Read the article

• Unity3D draw call optimization : static batching VS manually draw mesh with MaterialPropertyBlock

  - by Heisenbug

  I've read Unity3D draw call batching documentation. I understood it, and I want to use it (or something similar) in order to optimize my application. My situation is the following: I'm drawing hundreds of 3d buildings. Each building can be represented using a Mesh (or a SubMesh for each building, but I don't thing this will affect performances) Each building can be textured with several combinations of texture patterns(walls, windows,..). Textures are stored into an Atlas for optimizaztion (see Texture2d.PackTextures) Texture mapping and facade pattern generation is done in fragment shader. The shader can be the same (except for few values) for all buildings, so I'd like to use a sharedMaterial in order to optimize parameters passed to the GPU. The main problem is that, even if I use an Atlas, share the material, and declare the objects as static to use static batching, there are few parameters(very fews, it could be just even a float I guess) that should be different for every draw call. I don't know exactly how to manage this situation using Unity3D. I'm trying 2 different solutions, none of them completely implemented. Solution 1 Build a GameObject for each building building (I don't like very much the overhead of a GameObject, anyway..) Prepare each GameObject to be static batched with StaticBatchingUtility.Combine. Pack all texture into an atlas Assign the parent game object of combined batched objects the Material (basically the shader and the atlas) Change some properties in the material before drawing an Object The problem is the point 5. Let's say I have to assign a different id to an object before drawing it, how can I do this? If I use a different material for each object I can't benefit of static batching. If I use a sharedMaterial and I modify a material property, all GameObjects will reference the same modified variable Solution 2 Build a Mesh for every building (sounds better, no GameObject overhead) Pack all textures into an Atlas Draw each mesh manually using Graphics.DrawMesh Customize each DrawMesh call using a MaterialPropertyBlock This would solve the issue related to slightly modify material properties for each draw call, but the documentation isn't clear on the following point: Does several consecutive calls to Graphic.DrawMesh with a different MaterialPropertyBlock would cause a new material to be instanced? Or Unity can understand that I'm modifying just few parameters while using the same material and is able to optimize that (in such a way that the big atlas is passed just once to the GPU)?

  Read the article

• Guidance: A Branching strategy for Scrum Teams

  - by Martin Hinshelwood

  Having a good branching strategy will save your bacon, or at least your code. Be careful when deviating from your branching strategy because if you do, you may be worse off than when you started! This is one possible branching strategy for Scrum teams and I will not be going in depth with Scrum but you can find out more about Scrum by reading the Scrum Guide and you can even assess your Scrum knowledge by having a go at the Scrum Open Assessment. You can also read SSW’s Rules to Better Scrum using TFS which have been developed during our own Scrum implementations. Acknowledgements Bill Heys – Bill offered some good feedback on this post and helped soften the language. Note: Bill is a VS ALM Ranger and co-wrote the Branching Guidance for TFS 2010 Willy-Peter Schaub – Willy-Peter is an ex Visual Studio ALM MVP turned blue badge and has been involved in most of the guidance including the Branching Guidance for TFS 2010 Chris Birmele – Chris wrote some of the early TFS Branching and Merging Guidance. Dr Paul Neumeyer, Ph.D Parallel Processes, ScrumMaster and SSW Solution Architect – Paul wanted to have feature branches coming from the release branch as well. We agreed that this is really a spin-off that needs own project, backlog, budget and Team. Scenario: A product is developed RTM 1.0 is released and gets great sales.  Extra features are demanded but the new version will have double to price to pay to recover costs, work is approved by the guys with budget and a few sprints later RTM 2.0 is released.  Sales a very low due to the pricing strategy. There are lots of clients on RTM 1.0 calling out for patches. As I keep getting Reverse Integration and Forward Integration mixed up and Bill keeps slapping my wrists I thought I should have a reminder: You still seemed to use reverse and/or forward integration in the wrong context. I would recommend reviewing your document at the end to ensure that it agrees with the common understanding of these terms merge (forward integration) from parent to child (same direction as the branch), and merge  (reverse integration) from child to parent (the reverse direction of the branch). - one of my many slaps on the wrist from Bill Heys.   As I mentioned previously we are using a single feature branching strategy in our current project. The single biggest mistake developers make is developing against the “Main” or “Trunk” line. This ultimately leads to messy code as things are added and never finished. Your only alternative is to NEVER check in unless your code is 100%, but this does not work in practice, even with a single developer. Your ADD will kick in and your half-finished code will be finished enough to pass the build and the tests. You do use builds don’t you? Sadly, this is a very common scenario and I have had people argue that branching merely adds complexity. Then again I have seen the other side of the universe ... branching  structures from he... We should somehow convince everyone that there is a happy between no-branching and too-much-branching. - Willy-Peter Schaub, VS ALM Ranger, Microsoft   A key benefit of branching for development is to isolate changes from the stable Main branch. Branching adds sanity more than it adds complexity. We do try to stress in our guidance that it is important to justify a branch, by doing a cost benefit analysis. The primary cost is the effort to do merges and resolve conflicts. A key benefit is that you have a stable code base in Main and accept changes into Main only after they pass quality gates, etc. - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft The second biggest mistake developers make is branching anything other than the WHOLE “Main” line. If you branch parts of your code and not others it gets out of sync and can make integration a nightmare. You should have your Source, Assets, Build scripts deployment scripts and dependencies inside the “Main” folder and branch the whole thing. Some departments within MSFT even go as far as to add the environments used to develop the product in there as well; although I would not recommend that unless you have a massive SQL cluster to house your source code. We tried the “add environment” back in South-Africa and while it was “phenomenal”, especially when having to switch between environments, the disk storage and processing requirements killed us. We opted for virtualization to skin this cat of keeping a ready-to-go environment handy. - Willy-Peter Schaub, VS ALM Ranger, Microsoft   I think people often think that you should have separate branches for separate environments (e.g. Dev, Test, Integration Test, QA, etc.). I prefer to think of deploying to environments (such as from Main to QA) rather than branching for QA). - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft   You can read about SSW’s Rules to better Source Control for some additional information on what Source Control to use and how to use it. There are also a number of branching Anti-Patterns that should be avoided at all costs: You know you are on the wrong track if you experience one or more of the following symptoms in your development environment: Merge Paranoia—avoiding merging at all cost, usually because of a fear of the consequences. Merge Mania—spending too much time merging software assets instead of developing them. Big Bang Merge—deferring branch merging to the end of the development effort and attempting to merge all branches simultaneously. Never-Ending Merge—continuous merging activity because there is always more to merge. Wrong-Way Merge—merging a software asset version with an earlier version. Branch Mania—creating many branches for no apparent reason. Cascading Branches—branching but never merging back to the main line. Mysterious Branches—branching for no apparent reason. Temporary Branches—branching for changing reasons, so the branch becomes a permanent temporary workspace. Volatile Branches—branching with unstable software assets shared by other branches or merged into another branch. Note   Branches are volatile most of the time while they exist as independent branches. That is the point of having them. The difference is that you should not share or merge branches while they are in an unstable state. Development Freeze—stopping all development activities while branching, merging, and building new base lines. Berlin Wall—using branches to divide the development team members, instead of dividing the work they are performing. -Branching and Merging Primer by Chris Birmele - Developer Tools Technical Specialist at Microsoft Pty Ltd in Australia   In fact, this can result in a merge exercise no-one wants to be involved in, merging hundreds of thousands of change sets and trying to get a consolidated build. Again, we need to find a happy medium. - Willy-Peter Schaub on Merge Paranoia Merge conflicts are generally the result of making changes to the same file in both the target and source branch. If you create merge conflicts, you will eventually need to resolve them. Often the resolution is manual. Merging more frequently allows you to resolve these conflicts close to when they happen, making the resolution clearer. Waiting weeks or months to resolve them, the Big Bang approach, means you are more likely to resolve conflicts incorrectly. - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft   Figure: Main line, this is where your stable code lives and where any build has known entities, always passes and has a happy test that passes as well? Many development projects consist of, a single “Main” line of source and artifacts. This is good; at least there is source control . There are however a couple of issues that need to be considered. What happens if: you and your team are working on a new set of features and the customer wants a change to his current version? you are working on two features and the customer decides to abandon one of them? you have two teams working on different feature sets and their changes start interfering with each other? I just use labels instead of branches? That's a lot of “what if’s”, but there is a simple way of preventing this. Branching… In TFS, labels are not immutable. This does not mean they are not useful. But labels do not provide a very good development isolation mechanism. Branching allows separate code sets to evolve separately (e.g. Current with hotfixes, and vNext with new development). I don’t see how labels work here. - Bill Heys, VS ALM Ranger & TFS Branching Lead, Microsoft   Figure: Creating a single feature branch means you can isolate the development work on that branch.   Its standard practice for large projects with lots of developers to use Feature branching and you can check the Branching Guidance for the latest recommendations from the Visual Studio ALM Rangers for other methods. In the diagram above you can see my recommendation for branching when using Scrum development with TFS 2010. It consists of a single Sprint branch to contain all the changes for the current sprint. The main branch has the permissions changes so contributors to the project can only Branch and Merge with “Main”. This will prevent accidental check-ins or checkouts of the “Main” line that would contaminate the code. The developers continue to develop on sprint one until the completion of the sprint. Note: In the real world, starting a new Greenfield project, this process starts at Sprint 2 as at the start of Sprint 1 you would have artifacts in version control and no need for isolation.   Figure: Once the sprint is complete the Sprint 1 code can then be merged back into the Main line. There are always good practices to follow, and one is to always do a Forward Integration from Main into Sprint 1 before you do a Reverse Integration from Sprint 1 back into Main. In this case it may seem superfluous, but this builds good muscle memory into your developer’s work ethic and means that no bad habits are learned that would interfere with additional Scrum Teams being added to the Product. The process of completing your sprint development: The Team completes their work according to their definition of done. Merge from “Main” into “Sprint1” (Forward Integration) Stabilize your code with any changes coming from other Scrum Teams working on the same product. If you have one Scrum Team this should be quick, but there may have been bug fixes in the Release branches. (we will talk about release branches later) Merge from “Sprint1” into “Main” to commit your changes. (Reverse Integration) Check-in Delete the Sprint1 branch Note: The Sprint 1 branch is no longer required as its useful life has been concluded. Check-in Done But you are not yet done with the Sprint. The goal in Scrum is to have a “potentially shippable product” at the end of every Sprint, and we do not have that yet, we only have finished code.   Figure: With Sprint 1 merged you can create a Release branch and run your final packaging and testing In 99% of all projects I have been involved in or watched, a “shippable product” only happens towards the end of the overall lifecycle, especially when sprints are short. The in-between releases are great demonstration releases, but not shippable. Perhaps it comes from my 80’s brain washing that we only ship when we reach the agreed quality and business feature bar. - Willy-Peter Schaub, VS ALM Ranger, Microsoft Although you should have been testing and packaging your code all the way through your Sprint 1 development, preferably using an automated process, you still need to test and package with stable unchanging code. This is where you do what at SSW we call a “Test Please”. This is first an internal test of the product to make sure it meets the needs of the customer and you generally use a resource external to your Team. Then a “Test Please” is conducted with the Product Owner to make sure he is happy with the output. You can read about how to conduct a Test Please on our Rules to Successful Projects: Do you conduct an internal "test please" prior to releasing a version to a client?   Figure: If you find a deviation from the expected result you fix it on the Release branch. If during your final testing or your “Test Please” you find there are issues or bugs then you should fix them on the release branch. If you can’t fix them within the time box of your Sprint, then you will need to create a Bug and put it onto the backlog for prioritization by the Product owner. Make sure you leave plenty of time between your merge from the development branch to find and fix any problems that are uncovered. This process is commonly called Stabilization and should always be conducted once you have completed all of your User Stories and integrated all of your branches. Even once you have stabilized and released, you should not delete the release branch as you would with the Sprint branch. It has a usefulness for servicing that may extend well beyond the limited life you expect of it. Note: Don't get forced by the business into adding features into a Release branch instead that indicates the unspoken requirement is that they are asking for a product spin-off. In this case you can create a new Team Project and branch from the required Release branch to create a new Main branch for that product. And you create a whole new backlog to work from.   Figure: When the Team decides it is happy with the product you can create a RTM branch. Once you have fixed all the bugs you can, and added any you can’t to the Product Backlog, and you Team is happy with the result you can create a Release. This would consist of doing the final Build and Packaging it up ready for your Sprint Review meeting. You would then create a read-only branch that represents the code you “shipped”. This is really an Audit trail branch that is optional, but is good practice. You could use a Label, but Labels are not Auditable and if a dispute was raised by the customer you can produce a verifiable version of the source code for an independent party to check. Rare I know, but you do not want to be at the wrong end of a legal battle. Like the Release branch the RTM branch should never be deleted, or only deleted according to your companies legal policy, which in the UK is usually 7 years.   Figure: If you have made any changes in the Release you will need to merge back up to Main in order to finalise the changes. Nothing is really ever done until it is in Main. The same rules apply when merging any fixes in the Release branch back into Main and you should do a reverse merge before a forward merge, again for the muscle memory more than necessity at this stage. Your Sprint is now nearly complete, and you can have a Sprint Review meeting knowing that you have made every effort and taken every precaution to protect your customer’s investment. Note: In order to really achieve protection for both you and your client you would add Automated Builds, Automated Tests, Automated Acceptance tests, Acceptance test tracking, Unit Tests, Load tests, Web test and all the other good engineering practices that help produce reliable software.     Figure: After the Sprint Planning meeting the process begins again. Where the Sprint Review and Retrospective meetings mark the end of the Sprint, the Sprint Planning meeting marks the beginning. After you have completed your Sprint Planning and you know what you are trying to achieve in Sprint 2 you can create your new Branch to develop in. How do we handle a bug(s) in production that can’t wait? Although in Scrum the only work done should be on the backlog there should be a little buffer added to the Sprint Planning for contingencies. One of these contingencies is a bug in the current release that can’t wait for the Sprint to finish. But how do you handle that? Willy-Peter Schaub asked an excellent question on the release activities: In reality Sprint 2 starts when sprint 1 ends + weekend. Should we not cater for a possible parallelism between Sprint 2 and the release activities of sprint 1? It would introduce FI’s from main to sprint 2, I guess. Your “Figure: Merging print 2 back into Main.” covers, what I tend to believe to be reality in most cases. - Willy-Peter Schaub, VS ALM Ranger, Microsoft I agree, and if you have a single Scrum team then your resources are limited. The Scrum Team is responsible for packaging and release, so at least one run at stabilization, package and release should be included in the Sprint time box. If more are needed on the current production release during the Sprint 2 time box then resource needs to be pulled from Sprint 2. The Product Owner and the Team have four choices (in order of disruption/cost): Backlog: Add the bug to the backlog and fix it in the next Sprint Buffer Time: Use any buffer time included in the current Sprint to fix the bug quickly Make time: Remove a Story from the current Sprint that is of equal value to the time lost fixing the bug(s) and releasing. Note: The Team must agree that it can still meet the Sprint Goal. Cancel Sprint: Cancel the sprint and concentrate all resource on fixing the bug(s) Note: This can be a very costly if the current sprint has already had a lot of work completed as it will be lost. The choice will depend on the complexity and severity of the bug(s) and both the Product Owner and the Team need to agree. In this case we will go with option #2 or #3 as they are uncomplicated but severe bugs. Figure: Real world issue where a bug needs fixed in the current release. If the bug(s) is urgent enough then then your only option is to fix it in place. You can edit the release branch to find and fix the bug, hopefully creating a test so it can’t happen again. Follow the prior process and conduct an internal and customer “Test Please” before releasing. You can read about how to conduct a Test Please on our Rules to Successful Projects: Do you conduct an internal "test please" prior to releasing a version to a client?   Figure: After you have fixed the bug you need to ship again. You then need to again create an RTM branch to hold the version of the code you released in escrow.   Figure: Main is now out of sync with your Release. We now need to get these new changes back up into the Main branch. Do a reverse and then forward merge again to get the new code into Main. But what about the branch, are developers not working on Sprint 2? Does Sprint 2 now have changes that are not in Main and Main now have changes that are not in Sprint 2? Well, yes… and this is part of the hit you take doing branching. But would this scenario even have been possible without branching?   Figure: Getting the changes in Main into Sprint 2 is very important. The Team now needs to do a Forward Integration merge into their Sprint and resolve any conflicts that occur. Maybe the bug has already been fixed in Sprint 2, maybe the bug no longer exists! This needs to be identified and resolved by the developers before they continue to get further out of Sync with Main. Note: Avoid the “Big bang merge” at all costs.   Figure: Merging Sprint 2 back into Main, the Forward Integration, and R0 terminates. Sprint 2 now merges (Reverse Integration) back into Main following the procedures we have already established.   Figure: The logical conclusion. This then allows the creation of the next release. By now you should be getting the big picture and hopefully you learned something useful from this post. I know I have enjoyed writing it as I find these exploratory posts coupled with real world experience really help harden my understanding.  Branching is a tool; it is not a silver bullet. Don’t over use it, and avoid “Anti-Patterns” where possible. Although the diagram above looks complicated I hope showing you how it is formed simplifies it as much as possible.   Technorati Tags: Branching,Scrum,VS ALM,TFS 2010,VS2010

  Read the article

• Best Practices for Building a Virtualized SPARC Computing Environment

  - by Scott Elvington

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle just published Best Practices for Building a Virtualized SPARC Computing Environment, a white paper that provides guidance on the complete hardware and software stack for deploying and managing your physical and virtual SPARC infrastructure. The solution is based on Oracle SPARC T4 servers, Oracle Solaris 11 with Oracle VM for SPARC 2.2, Sun ZFS storage appliances, Sun 10GbE 72 port switches and Oracle Enterprise Manager Ops Center 12c. The paper emphasizes the value and importance of planning the resources (compute, network and storage) that will comprise the virtualized environment to achieve the desired capacity, performance and availability characteristics. The document also details numerous operational best practices that will help you deliver on those characteristics with unique capabilities provided by Enterprise Manager Ops Center including policy-based guest placement, pool resource balancing and automated guest recovery in the event of server failure. Plenty of references to supplementary documentation are included to help point you to additional resources. Whether you’re building the first stages of your private cloud or a general-purpose virtualized SPARC computing environment, these documented best practices will help ensure success. Please join Phil Bullinger and Steve Wilson from Oracle to learn more about breakthrough efficiency in private cloud infrastructure and how SPARC based virtualization can help you get started on your cloud journey. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• WebLogic Scripting Tool Tip &ndash; relax the syntax with the easy button

  - by james.bayer

  I stumbled on to this feature in WLST tonight called easeSyntax.  Apparently it’s a hidden feature that one of the WebLogic support engineers blogged about that allows you to simplify the commands in the interactive mode to have fewer parentheses and quotes.  For example, see how some of the commands instead of typing “ls()” I can type '”ls” or “cd(“/somepath”)” can become “cd /somepath”.  It’s not going to save the world, but it will help cut down on some extra typing. The example I was researching when stumbling into this was for how to print the runtime status of deployed application named “hello” on the “AdminServer”.  See the below output. wls:/base_domain/domainConfig> easeSyntax()   You have chosen to ease syntax for some WLST commands. However, the easy syntax should be strictly used in interactive mode. Easy syntax will not function properly in script mode and when used in loops. You can still use the regular jython syntax although you have opted for easy syntax. Use easeSyntax to turn this off. Use help(easeSyntax) for commands that support easy syntax wls:/base_domain/domainConfig> domainRuntime   wls:/base_domain/domainRuntime> ls dr-- AppRuntimeStateRuntime dr-- CoherenceServerLifeCycleRuntimes dr-- ConsoleRuntime dr-- DeployerRuntime dr-- DeploymentManager dr-- DomainServices dr-- LogRuntime dr-- MessageDrivenControlEJBRuntime dr-- MigratableServiceCoordinatorRuntime dr-- MigrationDataRuntimes dr-- PolicySubjectManagerRuntime dr-- SNMPAgentRuntime dr-- ServerLifeCycleRuntimes dr-- ServerRuntimes dr-- ServerServices dr-- ServiceMigrationDataRuntimes   -r-- ActivationTime Wed Dec 15 22:37:02 PST 2010 -r-- MessageDrivenControlEJBRuntime null -r-- MigrationDataRuntimes null -r-- Name base_domain -rw- Parent null -r-- ServiceMigrationDataRuntimes null -r-- Type DomainRuntime   -r-x preDeregister Void : -r-x restartSystemResource Void : WebLogicMBean(weblogic.management.configuration.SystemResourceMBean)   wls:/base_domain/domainRuntime> cd AppRuntimeStateRuntime/AppRuntimeStateRuntime wls:/base_domain/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> ls   -r-- ApplicationIds java.lang.String[active-cache#[email protected], coherence-web-spi#[email protected], coherence#3. -r-- Name AppRuntimeStateRuntime -r-- Type AppRuntimeStateRuntime   -r-x getCurrentState String : String(appid),String(moduleid),String(subModuleId),String(target) -r-x getCurrentState String : String(appid),String(moduleid),String(target) -r-x getCurrentState String : String(appid),String(target) -r-x getIntendedState String : String(appid) -r-x getIntendedState String : String(appid),String(target) -r-x getModuleIds String[] : String(appid) -r-x getModuleTargets String[] : String(appid),String(moduleid) -r-x getModuleTargets String[] : String(appid),String(moduleid),String(subModuleId) -r-x getModuleType String : String(appid),String(moduleid) -r-x getRetireTimeMillis Long : String(appid) -r-x getRetireTimeoutSeconds Integer : String(appid) -r-x getSubmoduleIds String[] : String(appid),String(moduleid) -r-x isActiveVersion Boolean : String(appid) -r-x isAdminMode Boolean : String(appid),String(java.lang.String) -r-x preDeregister Void :   wls:/base_domain/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> cmo.getCurrentState('hello','AdminServer') 'STATE_ACTIVE' wls:/base_domain/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> cd / wls:/base_domain/domainRuntime>

  Read the article

• Desigual Extiende Uso de Oracle ® ATG Web Commerce para potenciar su expansión internacional en línea

  - by Noelia Gomez

  Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 Desigual, la empresa de moda internacional, ha extendido el uso de Oracle® ATG Web Commerce para dar soporte a su expansión creciente de sus capacidades comerciales de manera internacional y para ayudar a ofrecer un servicio de compra más personalizado a más clientes de manera global. Desigual eligió primero Oracle ATG Web Commerce en 2006 para lanzar su plataforma B2B y automatizar sus ventas a su negocio completo de ventas, Entonces, en Octubre de 2010, Desigual lanzó su plataforma B2C usando Oracle ATG Web Commerce, y ahora ofrece operaciones online en nueve países y 11 lenguas diferentes. Para dar soporte a esta creciente expansión de sus operaciones comerciales y de merchandising en otras geografías, Desigual decidió completar su arquitectura existente con Oracle ATG Web Commerce Merchandising y Oracle ATG Web Commerce Service Center. Además, Desigual implementará Oracle Endeca Guided Search para permitir a los clientes adaptarse de manera más eficiente con su entorno comercial y encontrar rápidamente los productos más relevantes y deseados. Desigual usará las aplicaciones de Oracle para permitir a los usuarios del negocio ganar el control sobre cómo ofrece la compañía una experiencia al cliente más personalizada y conectada a través de los diferentes canales, promoviendo ofertas personalizadas a cada cliente, priorizando los resultados de búsqueda e integrando las operaciones de la web con el contact center sin problemas para aumentar la satisfacción y mejorar los resultados de las conversaciones. Desde que se lanzara en 2002, el minorista español ha crecido rápidamente y ahora ofrece su original moda en sus 200 tiendas propias , 7000 minoristas autorizados y 1700 tiendas de concesión en 55 países. Infórmese con mayor profundidad de nuestras soluciones Oracle Customer Experience aquí. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Going… Going.. Going.. GONE! The OPNX ScoreBoard

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} It was the bottom of the 9th, the bases were loaded and Oracle PartnerNetwork knocked it out of the park! Partners really scored big this year with the first ever Oracle PartnerNetwork Exchange Program at OpenWorld, and it was a win for the ages! With so much to take part in and experience, we wanted to offer you a quick play-by-play of the week in case you couldn’t make every event. Up to bat first was our Global Keynote with Oracle Senior Vice President, Judson Althoff. The Keynote Hall was packed with a full house, and the crowd went wild after the latest Cloud announcements were made. The OPN Exchange General Sessions followed shortly after, and covered topics like Technology, Applications and Engineered Systems – a real game changer for our partners and customers alike! Work hard, play hard has always been our motto, as partners mixed and mingled during Sunday’s AfterDark Reception, all while Macy Gray sung her greatest hits below. But that was only Game Day #1. The rest of the week included: 50+ Partner exclusive sessions, OPN’s Test Fest, the bright and early 5K Partner Fun Run, the Social Media Rally Station at the OPN Lounge, Java Embedded @JavaOne and last but not least, our Ice Cream Social… If only there were some peanuts to go with! Watch below as Judson Althoff recap’s his experience at OPN Exchange this year, and get’s ready for next season! We’re Outta Here! The OPN Communications Team

  Read the article

• Silverlight Cream for March 10, 2010 - 2 -- #811

  - by Dave Campbell

  In this Issue: AfricanGeek, Phil Middlemiss, Damon Payne, David Anson, Jesse Liberty, Jeremy Likness, Jobi Joy(-2-), Fredrik Normén, Bobby Diaz, and Mike Taulty(-2-). Shoutouts: Shawn Wildermuth blogged that they posted My "What's New in Silverlight 3" Video from 0reDev Last Fall Shawn Wildermuth also has a post up for his loyal followers: Where to See Me At MIX10 Jonas Follesø has presentation materials up as well: MVVM presentation from NDC2009 on Vimeo Adam Kinney updated his Favorite Tool and Library Downloads for Silverlight From SilverlightCream.com: Styling Silverlight ListBox with Blend 3 In his latest Video Tutorial, AfricanGeek is animating the ListBox control by way of Expression Blend 3. Animating the Silverlight Opacity Mask Phil Middlemiss has written a Behavior that lets you turn a FrameworkElement into an opacity mask for it's parent container... check out his tutorial and grab the code. AddRange for ObservableCollection in Silverlight 3 Damon Payne has a post up discussing the problem with large amounts of data in an ObservableCollection, and how using AddRange is a performance booster. Easily rotate the axis labels of a Silverlight/WPF Toolkit chart David Anson blogged a solution to rotating the axis labels of a Silverlight and WPF chart. Persisting the Configuration (Updated) Jesse Liberty has a good discussion on the continuation of his HyperVideo Platform talking about what all he is needing from the database in the form of configuration information... including the relationships. Animations and View Models: IAnimationDelegate Check out Jeremy Likness' IAnimationDelegate that lets your ViewModel fire and respond to animations without having to know all about them. Button Style - Silverlight Jobi Joy converted a WPF control template into Silverlight... and you'll want to download the XAML he's got for this :) A Simple Accordion banner using ListBox Jobi Joy also has an Image Accordian created in Expression Blend... and it's a 'drop this XAML in your User Control' kinda thing... again, go grab the XAML :) WCF RIA Services Silverlight Business Application – Using ASP.NET SiteMap for Navigation Fredrik Normén has a code-laden post up on RIA Services and the ASP.NET SiteMap. He is using the Silverlight Business app template that comes with WCF RIA Services. A Simple, Selectable Silverlight TextBlock (sort of)... Bobby Diaz shares with us his solution for a Text control that can be copied from in the same manner 'normal' web controls can be. He also includes a link to another post on the same topic. Silverlight 4 Beta Networking. Part 11 - WCF and TCP Mike Taulty has another pair of video tutorials up in his Networking series. This one is on WCF over TCP Silverlight 4 Beta Networking. Part 12 - WCF and Polling HTTP Mike Taulty's 12th networking video tutorial is on WCF with HTTP polling duplex. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    MIX10

  Read the article

• Adding Descriptive Flex Field (DFF) through OAF Personalization

  - by Manoj Madhusoodanan

  In this blog I will explain how to add a DFF to a existing OAF page through personalization.I am using Supplier Quick Update Page ( /oracle/apps/pos/supplier/webui/SuppSummPG ). If you want to see how to create DFF please click here. In this scenario I am using a custom DFF. Following are the details. Application -> Payables ( Code: SQLAP )Name -> XXCUST_SUPPLIER_DFFTitle -> XXCUST - Supplier DFFTable Name -> AP_SUPPLIERSDFV View name -> XXCUST_SUPPLIER_DFVReference Fields -> ATTRIBUTE_CATEGORY Following are the Context Field Details. Prompt -> Supplier TypeValue Set -> XXCUST_SUP_TYPE ( Values : External and Internal )Reference Field -> ATTRIBUTE_CATEGORY Below table shows the segment details of XXCUST_SUPPLIER_DFF. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Code Segments Column Value Set Global Data Elements Identification Number ATTRIBUTE1 15 Characters External Type ATTRIBUTE2 XXCUST_EXT_SUP_TYPE Values          Domestic           International Internal Department ATTRIBUTE2 15 Characters Following steps you need to perform to create flex item in the Quick Update page. 1) Click on Personalize Page.In the Personalize Page click on Complete View. 2) Click on Create Item.( Based on where you want to place the DFF choose appropriate layout). 3) Create flex item with following details. 4) If you want to arrange the item in the page click on Reorder. Following is the output.

  Read the article

• HPC Server Dynamic Job Scheduling: when jobs spawn jobs

  - by JoshReuben

  HPC Job Types HPC has 3 types of jobs http://technet.microsoft.com/en-us/library/cc972750(v=ws.10).aspx · Task Flow – vanilla sequence · Parametric Sweep – concurrently run multiple instances of the same program, each with a different work unit input · MPI – message passing between master & slave tasks But when you try go outside the box – job tasks that spawn jobs, blocking the parent task – you run the risk of resource starvation, deadlocks, and recursive, non-converging or exponential blow-up. The solution to this is to write some performance monitoring and job scheduling code. You can do this in 2 ways: manually control scheduling - allocate/ de-allocate resources, change job priorities, pause & resume tasks , restrict long running tasks to specific compute clusters Semi-automatically - set threshold params for scheduling. How – Control Job Scheduling In order to manage the tasks and resources that are associated with a job, you will need to access the ISchedulerJob interface - http://msdn.microsoft.com/en-us/library/microsoft.hpc.scheduler.ischedulerjob_members(v=vs.85).aspx This really allows you to control how a job is run – you can access & tweak the following features: max / min resource values whether job resources can grow / shrink, and whether jobs can be pre-empted, whether the job is exclusive per node the creator process id & the job pool timestamp of job creation & completion job priority, hold time & run time limit Re-queue count Job progress Max/ min Number of cores, nodes, sockets, RAM Dynamic task list – can add / cancel jobs on the fly Job counters When – poll perf counters Tweaking the job scheduler should be done on the basis of resource utilization according to PerfMon counters – HPC exposes 2 Perf objects: Compute Clusters, Compute Nodes http://technet.microsoft.com/en-us/library/cc720058(v=ws.10).aspx You can monitor running jobs according to dynamic thresholds – use your own discretion: Percentage processor time Number of running jobs Number of running tasks Total number of processors Number of processors in use Number of processors idle Number of serial tasks Number of parallel tasks Design Your algorithms correctly Finally , don’t assume you have unlimited compute resources in your cluster – design your algorithms with the following factors in mind: · Branching factor - http://en.wikipedia.org/wiki/Branching_factor - dynamically optimize the number of children per node · cutoffs to prevent explosions - http://en.wikipedia.org/wiki/Limit_of_a_sequence - not all functions converge after n attempts. You also need a threshold of good enough, diminishing returns · heuristic shortcuts - http://en.wikipedia.org/wiki/Heuristic - sometimes an exhaustive search is impractical and short cuts are suitable · Pruning http://en.wikipedia.org/wiki/Pruning_(algorithm) – remove / de-prioritize unnecessary tree branches · avoid local minima / maxima - http://en.wikipedia.org/wiki/Local_minima - sometimes an algorithm cant converge because it gets stuck in a local saddle – try simulated annealing, hill climbing or genetic algorithms to get out of these ruts   watch out for rounding errors – http://en.wikipedia.org/wiki/Round-off_error - multiple iterations can in parallel can quickly amplify & blow up your algo ! Use an epsilon, avoid floating point errors,  truncations, approximations Happy Coding !

  Read the article

• Survey Probes the Project Management Concerns of Financial Services Executives

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Do you wonder what are the top reasons why large projects in the financial industry fail to meet budgets, schedules, and other key performance criteria? Being able to answer this question can provide important insight and value of good project management practices for your organization. According to 400 senior executives who participated in a new survey conducted by the Economist Intelligence Unit and sponsored by Oracle, unrealistic project goals is the main reason for roadblocks to success Other common stumbling blocks are poor alignment between project and organizational goals, inadequate human resources, lack of strong leadership, and unwillingness among team members to point out problems. This survey sample also had a lot to say about the impact of regulatory compliance on the overall portfolio management process. Thirty-nine percent acknowledged that regulations enabled efficient functioning of their businesses. But a similar number said that regulations often require more financial resources than were originally allocated to bring projects in on time. Regulations were seen by 35 percent of the executives as roadblocks to their ability to invest in the organization’s growth and success. These revelations among others are discussed in depth in a new on-demand Webcast titled “Too Good to Fail: Developing Project Management Expertise in Financial Services” now available from Oracle. The Webcast features Brian Gardner, editor of the Economist Intelligence Unit, who presents these findings from this survey along with Guy Barlow, director of industry strategy for Oracle Primavera. Together, they analyze what the numbers mean for project and program managers and the financial services industry. Register today to watch the on-demand Webcast and get a full rundown and analysis of the survey results. Take the Economist Intelligence Unit benchmarking survey and see how your views compare with those of other financial services industry executives in ensuring project success.  Read more in the October Edition of the quarterly Information InDepth EPPM Newsletter

  Read the article

• Oracle ADF Core Functionality Now Available for Free - Presenting Oracle ADF Essentials

  - by Shay Shmeltzer

  Normal 0 false false false EN-US X-NONE HE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:Arial;} We are happy to announce the new Oracle ADF Essentials - a free to develop and deploy version of the core technologies at the base of Oracle ADF – Oracle’s strategic development framework that was used, among other things, to build the new generation of the enterprise Oracle Fusion Applications. This release is aligned with the new Oracle JDeveloper 11.1.2.3 version that we released today. Oracle ADF Essentials enables developers to use the following free: Oracle ADF Faces Rich Client components –over 150 JSF 2.0 components that include extensive charting and data visualization components, supports skinning, internalization, accessibility and touch gestures and providing advanced Ajax, windowing, drag and drop and other UI capabilities in a declarative way. Oracle ADF Controller – an extension on top of the JSF controller providing complete process flow definition and enabling advanced reusability of flows inside page’s regions. Oracle ADF Binding – a declarative way to bind various business services to JSF user interfaces eliminating tedious managed-beans coding. Oracle ADF Business Components – a declarative layer for building Java based business services on top of relational databases. The main goal of Oracle ADF Essentials is to bring the benefits of Oracle ADF to a broader community of developers. If you are already using Oracle ADF, a key new functionality for you would be the ability to deploy your application on GlassFish. Several other interesting points: We provide instructions for deployment of Oracle ADF Essentials on GlassFish and officially support this platform for Oracle ADF Essentials deployment. Developers can choose to use the whole Oracle ADF Essentials, or just pieces of the technology. Visual development for Oracle ADF Essentials is provided in Oracle JDeveloper. Eclipse support via Oracle Enterprise for Eclipse (OEPE) is also planned. Want to learn more? Here is a quick overview and development demo of Oracle ADF Essentials For more visit the Oracle ADF Essentials page on OTN

  Read the article

• From Trailer to Cloud: Skire acquisition expands Oracle’s on-demand project management options.

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Alison Weiss Whether building petrochemical facilities in the Middle East or managing mining operations in Australia, project managers face significant challenges. Local regulations and currencies, contingent labor, hybrid public/private funding sources, and more threaten project budgets and schedules. According to Mike Sicilia, senior vice president and general manager for the Oracle Primavera Global Business Unit, there will be trillions of dollars invested in industrial projects around the globe between 2012 and 2016. But even with so much at stake, project leads don’t always have time to look for new and better enterprise project portfolio management (EPPM) software solutions to manage large-scale capital initiatives across the enterprise. Oracle’s recent acquisition of Skire, a leading provider of capital program management and facilities management applications available both in the cloud and on premises, gives customers outstanding new EPPM options. By combining Skire’s cloud-based solutions for managing capital projects, real estate, and facilities with Oracle’s Primavera EPPM solutions, project managers can quickly get a solution running that is interoperable across an extended enterprise. Staff can access the EPPM solution within days, rather than waiting for corporate IT to put technology in place. “Staff can access the EPPM solution within days, rather than waiting for corporate IT to put technology in place,” says Sicilia. This applies to a problem that has, according to Sicilia, bedeviled project managers for decades: extending EPPM functionality into the field. Frequently, large-scale projects are remotely located, and the lack of communications and IT infrastructure threatened the accuracy of project reporting and scheduling. Read the full version of this article in the November 2012 edition of Oracle's Profit Magazine: Special Report on Project Management

  Read the article

• ING Selecciona Oracle Fusion HCM para la Gestión del Capital Humano

  - by Noelia Gomez

  Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif";} La decisión de ING sobre la elección de Oracle Fusion HCM fue impulsada por su deseo continuo de fortalecer la función de RRHH para impulsar su negocio. Tras mucho tiempo como cliente de Oracle PeopleSoft HCM, evaluó el segmento de mercado de HCM antes de seleccionar Oracle Fusion HCM, con el objetivo de seguir utilizando las herramientas principales de recursos humanos y mantener su posición como uno de los principales empleadores en los Países Bajos. ING implementará Oracle Fusion HCM, en estrecha colaboración con NorthgateArinso, miembro de Oracle PartnerNetwork (Gold), que proporcionará los servicios de alojamiento y de Oracle Consulting. La firma de servicios financieros utilizará toda la suite de Oracle Fusion Global Human Resources y Oracle Talent Management incluyendo Oracle Fusion Goal, Oracle Fusion OTBI, Oracle Fusion Workforce Compensation, Oracle Fusion Benefits y Oracle Fusion Performance Management. Además, ING implementará Oracle Fusion Financials, aprovechando la plataforma unificada de Oracle Fusion Applications. “Como institución financiera líder y mejor empleador, ING considera a sus colaboradores el activo más estratégico. Continuar siendo “best-in-class” en recursos humanos, es un diferenciador competitivo para nosotros, y necesitamos una aplicación líder de HCM para complementar nuestros esfuerzos ", dijo Marijke Brunklaus, Director General de Recursos Humanos de ING Bank Países Bajos. "Siendo un antiguo usuario de Oracle PeopleSoft HCM, cuidadosamente hemos evaluado las posibles soluciones disponibles y elegimos Oracle Fusion HCM como nuestra futura plataforma. Las profundas capacidades globales y las herramientas principales de talento de Oracle Fusion HCM son una buena opción para ayudarnos a evolucionar continuamente en nuestro negocio". Puede conocer más sobre HCM Fusion : · Oracle Fusion Applications · Oracle Fusion Human Capital Management · Oracle PartnerNetwork · Oracle Consulting Services · Oracle Human Capital Management Blog · Oracle HCM on Twitter · Oracle HCM on Facebook

  Read the article

• Demonstration VM BIC2g 2013-10 Partner Edition for Download

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 UPDATED ! The “BIC2g” demo VM (now version 2013-10) is downloadable from our BIC2g Beehive Online Workspace portal for OPN member partners. Compared to the prior version, Bic2g 2013-04, the new Bic2g 2013-10 has: OBIEE was upgraded from 11.1.1.7.0 to 11.1.1.7.1. with BI Mobile Application Designer (BIMAD) added. TimesTen was upgraded from 11.2.2.3.0 to 11.2.2.5.0 ODI Client 11.1.1.7.0 was installed, including a Standalone agent and empty repositories, and the BI Applications 11g ODI Repositories were included (BIAPPS_11g) Informatica and DAC were removed from image There are additional demos for BI-Apps and for Endeca. The compact deployment of EPM is installed and configured, including: Hyperion Foundation, Essbase, Essbase Studio, Essbase Administration Services, Provider Services, Calculation Manager, Planning, Reporting and Analysis, Financial Reporting, Web Analysis, and Workspace. The access details, for OPN member partners only, to get added to the BIC2G Beehive Online Workspace portal are shown from this page @ BI Solutions Engineering Partner Portal. This Oracle Business Intelligence Linux VM virtual appliance (“BIC2g”) was developed to support Oracle OBI, BI-Apps and EPM Hyperion sales and Oracle partners in product demonstrations, training activities and POC activities.  If you do not need BI-Apps, then there is a slightly smaller VM OBI Sample-App you can get from OTN: see @ Oracle BI and EPM Demonstration SampleApp V309 on OTN. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• Oracle AIM, Oracle ABF, and Siebel Results Roadmap Officially Retired as of January 31, 2011

  - by tom.spitz

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} It seems somehow appropriate that the first entry of the Oracle® Unified Method (OUM) blog is about the retirement of several of our legacy methods, most notably AIM Foundation.If you're reading this, you're probably aware that Oracle has been developing OUM to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product. As Oracle has continued to acquire new companies and technologies, it has become essential that we also create a single, unified language and approach for implementation - across the Oracle ecosystem.With the release of OUM 5.1 in 2009, OUM provided full support for all enterprise application implementation projects including Oracle E-Business Suite R12, Siebel CRM, PeopleSoft Enterprise, and JD Edwards EnterpriseOne projects. In 2010, we released OUM training that supports the use of OUM on these types of projects.That support represented a major milestone in the evolution of OUM and enabled implementers to transition to OUM. Consequently, we announced a staggered retirement schedule for Oracle's legacy methods. On January 31, 2011 we announced the retirement of:Oracle Application Implementation Method (AIM)Oracle AIM for Business Flows (ABF)Siebel Results RoadmapLater this year, we will announce the retirement of Compass - the legacy PeopleSoft method - and Data Warehouse Method Fast Track.OUM is available free of charge to Oracle Gold, Platinum, and Diamond partners through the Oracle Partner Network (OPN) [OUM on OPN]. The OUM Customer Program allows customers to obtain copies of the method for their internal use by contracting with Oracle for an engagement of two weeks or longer meeting some additional minimum criteria.There be more retirement announcements in the coming months. For now it's "Adios AIM." Thanks for the memories...

  Read the article

• It's Coming: Chalk Talk with John

  - by Tanu Sood

  ...John Brunswick that is. Who is this John Brunswick, you ask? John Brunswick is an Enterprise Architect with Oracle. As an Oracle Enterprise Architect, John focuses on the alignment of technical capabilities in support of business vision and objectives, as well as the overall business value of technology. What's more he is pretty handy with animation and digital videos as you will see shortly. Starting tomorrow, we will host a bi-weekly column with John called "Chalk Talk with John". Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In our "Chalk Talk with John" series, John will leverage his skills, experience and expertise (& his passion in digital animation) to discuss technology in business terms or as he puts it "so my ma understands what I do for a living". Through this series, John will explore the practical value of Middleware in the context of two fictional communities, shared through analogies aligned to enterprise technology.  This format offers business stakeholders and IT a common language for understanding the benefits of technology in support of their business initiatives, regardless of their current level of technical knowledge. So, be sure to tune in tomorrow and every 2 weeks for "Chalk Talk with John".

  Read the article

• Bind Variable and SQL error during statement preparation

  - by Abhishek Dwivedi

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}  I was getting the following exception at run-time. JBO-27122: SQL error during statement preparation. Statement: SELECT AxEO.A_ID, AxEO.B_ID, AxEO.C_ID, ByEO.A_ID, ByEO.B_ID, ByEO.C_ID, Cz.A_ID, Cz.B_ID, Cz.C_ID FROM ABC_x AxEO, ABC_y ByEO, ABC_z CzEO WHERE AxEO.A_ID = ByEO.A_ID AND  CzEO.A_ID = :Bind_PId I copied and pasted the query on SQL worksheet, replaced :Bind_PId with a valid id, and executed the query. The query worked alright, implying the query was alright. I tried to connect to different DBs but the issue persisted, meaning it was not a DB issue either. Finally, the root cause was found to be in the concerned VO; one of the bind variables (say Bind_TId) was marked "Required". De-selecting the Required check-box resolved the issue. In retrospect, the issue looks to be rather straight-forward. However, the error message is not very helpful, if not misleading. Besides, it's counter-intuitive to think that a bind variable which is not being used in a query can cause error while statement preparation. The other bind variable - Bind_TId - was being used in other view criteria, not the view criteria involved in the given query. Still, it was required.

  Read the article

• OPN Exchange @ OpenWorld – Don’t Forget…

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Mark your calendar because we’re less than a week away from kicking off our first ever Oracle PartnerNetwork Exchange @ OpenWorld program, and do we have a lot in store for you!  So don’t forget to attend these great partner events! Sunday, 9/30: The Global Partner Keynote with Judson Althoff and other senior executives @ 1:00pm OPN Exchange General Sessions  to discuss the overview of each OPN Exchange track including, Cloud, Engineered Systems, Industries, Technology and Applications @ 3:30pm The exclusive OPN Exchange AfterDark Reception complete with the smooth sounds of Macy Gray @ 7:30pm. Don’t worry, there is plenty to come after Sunday! Be sure to take part in all the exciting activity taking place during the week, including: Over 40 + OPN Exchange Sessions taking place at the Marriott Marquis throughout the week “Test Fest” exams for OPN Specialist Certifications,  taking place throughout the week The 5k Partner Fun Run- Meet at the W Hotel lobby on Monday 10/1 at 6 a.m. PT – No registration necessary! Led by Judson Althoff, SVP of WWA&C. Social Media Rally Station- Join us in the OPN Lounge on Monday to become social savvy and leverage social media tools for your business Ice Cream Social- Monday October 1st, from 3-5:30 p.m. in the OPN Lounge. Hosted by Oracle Advanced Customer Support Services. Endless Networking Opportunities at the OPN Lounge, the Howard Street Tent for lunch, the ‘It’s a Wrap Reception’, and much more! We can’t wait to see you there! The OPN Communications Team

  Read the article

• SQL SERVER – Rename Columnname or Tablename – SQL in Sixty Seconds #032 – Video

  - by pinaldave

  We all make mistakes at some point of time and we all change our opinion. There are quite a lot of people in the world who have changed their name after they have grown up. Some corrected their parent’s mistake and some create new mistake. Well, databases are not protected from such incidents. There are many reasons why developers may want to change the name of the column or table after it was initially created. The goal of this video is not to dwell on the reasons but to learn how we can rename the column and table. Earlier I have written the article on this subject over here: SQL SERVER – How to Rename a Column Name or Table Name. I have revised the same article over here and created this video. There is one very important point to remember that by changing the column name or table name one creates the possibility of errors in the application the columns and tables are used. When any column or table name is changed, the developer should go through every place in the code base, ad-hoc queries, stored procedures, views and any other place where there are possibility of their usage and change them to the new name. If this is one followed up religiously there are quite a lot of changes that application will stop working due to this name change.  One has to remember that changing column name does not change the name of the indexes, constraints etc and they will continue to reference the old name. Though this will not stop the show but will create visual un-comfort as well confusion in many cases. Here is my question back to you – have you changed ever column name or table name in production database (after project going live)? If yes, what was the scenario and need of doing it. After all it is just a name. Let me know what you think of this video. Here is the updated script. USE tempdb GO CREATE TABLE TestTable (ID INT, OldName VARCHAR(20)) GO INSERT INTO TestTable VALUES (1, 'First') GO -- Check the Tabledata SELECT * FROM TestTable GO -- Rename the ColumnName sp_RENAME 'TestTable.OldName', 'NewName', 'Column' GO -- Check the Tabledata SELECT * FROM TestTable GO -- Rename the TableName sp_RENAME 'TestTable', 'NewTable' GO -- Check the Tabledata - Error SELECT * FROM TestTable GO -- Check the Tabledata - New SELECT * FROM NewTable GO -- Cleanup DROP TABLE NewTable GO Related Tips in SQL in Sixty Seconds: SQL SERVER – How to Rename a Column Name or Table Name What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

  Read the article

• Automatic Standby Recreation for Data Guard

  - by pablo.boixeda(at)oracle.com

  Hi,Unfortunately sometimes a Standby Instance needs to be recreated. This can happen for many reasons such as lost archive logs, standby data files, failover, among others.This is why we wanted to have one script to recreate standby instances in an easy way.This script recreates the standby considering some prereqs:-Database Version should be at least 11gR1-Dummy instance started on the standby node (Seeking to improve this so it won't be needed)-Broker configuration hasn't been removed-In our case we have two TNSNAMES files, one for the Standby creation (using SID) and the other one for production using service names (including broker service name)-Some environment variables set up by the environment db script (like ORACLE_HOME, PATH...)-The directory tree should not have been modified in the stanby hostWe are currently using it on our 11gR2 Data Guard tests.Any improvements will be welcome! Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} #!/bin/ksh ###    NOMBRE / VERSION ###       recrea_dg.sh   v.1.00 ### ###    DESCRIPCION ###       reacreacion de la Standby ### ###    DEVUELVE ###       0 Creacion de STANDBY correcta ###       1 Fallo ### ###    NOTAS ###       Este shell script NO DEBE MODIFICARSE. ###       Todas las variables y constantes necesarias se toman del entorno. ### ###    MODIFICADO POR:    FECHA:        COMENTARIOS: ###    ---------------    ----------    ------------------------------------- ###      Oracle           15/02/2011    Creacion. ### ### ### Cargar entorno ### V_ADMIN_DIR=`dirname $0` . ${V_ADMIN_DIR}/entorno_bd.sh 1>>/dev/null if [ $? -ne 0 ] then   echo "Error Loading the environment."   exit 1 fi V_RET=0 V_DATE=`/bin/date` V_DATE_F=`/bin/date +%Y%m%d_%H%M%S` V_LOGFILE=${V_TRAZAS}/recrea_dg_${V_DATE_F}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1 ### ### Variables para Recrear el Data Guard ### V_DB_BR=`echo ${V_DB_NAME}|tr '[:lower:]' '[:upper:]'` if [ "${ORACLE_SID}" = "${V_DB_NAME}01" ] then         V_LOCAL_BR=${V_DB_BR}'01'         V_REMOTE_BR=${V_DB_BR}'02' else         V_LOCAL_BR=${V_DB_BR}'02'         V_REMOTE_BR=${V_DB_BR}'01' fi echo " Getting local instance ROLE ${ORACLE_SID} ..." sqlplus -s /nolog 1>>/dev/null 2>&1 <<-! whenever sqlerror exit 1 connect / as sysdba variable salida number declare   v_database_role v\$database.database_role%type; begin   select database_role into v_database_role from v\$database;   :salida := case v_database_role        when 'PRIMARY' then 2        when 'PHYSICAL STANDBY' then 3        else 4      end; end; / exit :salida ! case $? in 1) echo " ERROR: Cannot get instance ROLE ." | tee -a ${V_LOGFILE}   2>&1    V_RET=1 ;; 2) echo " Local Instance with PRIMARY role." | tee -a ${V_LOGFILE}   2>&1    V_DB_ROLE_LCL=PRIMARY ;; 3) echo " Local Instance with PHYSICAL STANDBY role." | tee -a ${V_LOGFILE}   2>&1    V_DB_ROLE_LCL=STANDBY ;; *) echo " ERROR: UNKNOWN ROLE." | tee -a ${V_LOGFILE}   2>&1    V_RET=1 ;; esac if [ "${V_DB_ROLE_LCL}" = "PRIMARY" ] then         echo "####################################################################" | tee -a ${V_LOGFILE}   2>&1         echo "${V_DATE} - Reacreating  STANDBY Instance." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "DATAFILES, CONTROL FILES, REDO LOGS and ARCHIVE LOGS in standby instance ${V_REMOTE_BR} will be removed" | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         V_PRIMARY=${V_LOCAL_BR}         V_STANDBY=${V_REMOTE_BR} fi if [ "${V_DB_ROLE_LCL}" = "STANDBY" ] then         echo "####################################################################" | tee -a ${V_LOGFILE}   2>&1         echo "${V_DATE} - Reacreating  STANDBY Instance." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "DATAFILES, CONTROL FILES, REDO LOGS and ARCHIVE LOGS in standby instance ${V_LOCAL_BR} will be removed" | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         V_PRIMARY=${V_REMOTE_BR}         V_STANDBY=${V_LOCAL_BR} fi # Cargamos las variables de los hosts # Cargamos las variables de los hosts PRY_HOST=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_PRIMARY} as sysdba select 'KEEP',host_name from v\\$instance; EOF` SBY_HOST=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba select 'KEEP',host_name from v\\$instance; EOF` echo "el HOST primary es: ${PRY_HOST}" | tee -a ${V_LOGFILE}   2>&1 echo "el HOST standby es: ${SBY_HOST}" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 ## ## Paramos la instancia STANDBY ## V_DATE=`/bin/date` echo "${V_DATE} - Shutting down Standby instance" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ## ## Paramos la instancia STANDBY ## SBY_STATUS=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba select 'KEEP',status from v\\$instance; EOF` if [ ${SBY_STATUS} = 'STARTED' ] || [ ${SBY_STATUS} = 'MOUNTED' ] || [ ${SBY_STATUS} = 'OPEN' ] then         echo "${V_DATE} - Standby instance shutdown in progress..." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1         sqlplus -s /nolog 1>>/dev/null 2>&1 <<-!         whenever sqlerror exit 1         connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba         shutdown abort         ! fi V_DATE=`/bin/date` echo "" echo "${V_DATE} - Standby instance stopped" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ## ## Eliminamos los ficheros de la base de datos ## V_SBY_SID=`echo ${V_STANDBY}|tr '[:upper:]' '[:lower:]'` V_PRY_SID=`echo ${V_PRIMARY}|tr '[:upper:]' '[:lower:]'` ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/data/*.dbf ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/arch/*.arc ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/ctl/*.ctl ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/*.ctl ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/*.rdo ## ## Startup nomount stby instance ## V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Starting  DUMMY Standby Instance " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ssh ${SBY_HOST} touch /home/oracle/init_dg.ora ssh ${SBY_HOST} 'echo "DB_NAME='${V_DB_NAME}'">>/home/oracle/init_dg.ora' ssh ${SBY_HOST} touch /home/oracle/start_dummy.sh ssh ${SBY_HOST} 'echo "ORACLE_HOME=/opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2 ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export ORACLE_HOME">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "PATH=\$ORACLE_HOME/bin:\$PATH">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export PATH">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "ORACLE_SID='${V_SBY_SID}'">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export ORACLE_SID">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "sqlplus -s /nolog <<-!" >>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      whenever sqlerror exit 1 ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      connect / as sysdba ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      startup nomount pfile='\''/home/oracle/init_dg.ora'\''">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "! ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'chmod 744 /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'sh /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'rm /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'rm /home/oracle/init_dg.ora' ## ## TNSNAMES change, specific for RMAN duplicate ## V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Setting up TNSNAMES in PRIMARY host " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ssh ${PRY_HOST} 'cp /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora.inst  /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora' V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Starting STANDBY creation with RMAN.. " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 rman<<-! >>${V_LOGFILE} connect target sys/${V_DB_PWD}@${V_PRIMARY} connect auxiliary sys/${V_DB_PWD}@${V_STANDBY} run { allocate channel prmy1 type disk; allocate channel prmy2 type disk; allocate channel prmy3 type disk; allocate channel prmy4 type disk; allocate auxiliary channel stby type disk; duplicate target database for standby from active database dorecover spfile parameter_value_convert '${V_PRY_SID}','${V_SBY_SID}' set control_files='/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/ctl/control01.ctl','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/control02.ctl' set db_file_name_convert='/opt/oracle/db/db${V_DB_NAME}/${V_PRY_SID}/','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/' set log_file_name_convert='/opt/oracle/db/db${V_DB_NAME}/${V_PRY_SID}/','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/' set 'db_unique_name'='${V_SBY_SID}' set log_archive_config='DG_CONFIG=(${V_PRIMARY},${V_STANDBY})' set fal_client='${V_STANDBY}' set fal_server='${V_PRIMARY}' set log_archive_dest_1='LOCATION=/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/arch DB_UNIQUE_NAME=${V_SBY_SID} MANDATORY VALID_FOR=(ALL_LOGFILES,ALL_ROLES)' set log_archive_dest_2='SERVICE="${V_PRIMARY}"','SYNC AFFIRM DB_UNIQUE_NAME=${V_PRY_SID} DELAY=0 MAX_FAILURE=0 REOPEN=300 REGISTER VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)' nofilenamecheck ; } ! V_DATE=`/bin/date` if [ $? -ne 0 ] then         echo ""         echo "${V_DATE} - Error creating STANDBY instance"         echo ""         echo "********************************************************************************" else         echo ""         echo "${V_DATE} - STANDBY instance created SUCCESSFULLY "         echo ""         echo "********************************************************************************" fi sqlplus -s /nolog 1>>/dev/null 2>&1 <<-!         whenever sqlerror exit 1         connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba         alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=${SBY_HOST})(PORT=1544))' scope=both;         alter system set service_names='${V_DB_NAME}.eu.roca.net,${V_SBY_SID}.eu.roca.net,${V_SBY_SID}_DGMGRL.eu.roca.net' scope=both;         alter database recover managed standby database using current logfile disconnect from session;         alter system set dg_broker_start=true scope=both; ! ## ## TNSNAMES change, back to Production Mode ## V_DATE=`/bin/date` echo " " | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Restoring TNSNAMES in PRIMARY "  | tee -a ${V_LOGFILE}   2>&1 echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************"  | tee -a ${V_LOGFILE}   2>&1 ssh ${PRY_HOST} 'cp /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora.prod  /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora' echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} -  Waiting for media recovery before check the DATA GUARD Broker"  | tee -a ${V_LOGFILE}   2>&1 echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************"  | tee -a ${V_LOGFILE}   2>&1 sleep 200 dgmgrl <<-! | grep SUCCESS 1>/dev/null 2>&1     connect ${V_DB_USR}/${V_DB_PWD}@${V_STANDBY}     show configuration verbose; ! if [ $? -ne 0 ] ; then         echo "       ERROR: El status del Broker no es SUCCESS" | tee -a ${V_LOGFILE}   2>&1 ;         V_RET=1 else          echo "      DATA GUARD OK " | tee -a ${V_LOGFILE}   2>&1 ; Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}         V_RET=0 fi Hope it helps.

  Read the article

• Changing Focus on my Blog

  - by D'Arcy Lussier

  I try to limit these types of blog posts – the ones where I communicate some change as if I have a loyal subscriber base that will be somehow affected. Still, I think its of worth if for nothing else than to document for myself an acknowledgement that my career is evolving. For the last who knows how long, I’ve had this as my banner: It’s funny how technology focuses change over time. 3.5 – 4 years ago I was wanting to immerse myself in BizTalk. Then I shifted, focussing on Silverlight. I even started a short-lived Silverlight user group here in Winnipeg that had, IMO, one of the *best* UG logos ever (do a Google search for the old school Winnipeg Jets logo if you don’t catch the reference)… And even how I identified myself – as a Developer – isn’t really accurate anymore as I’ve shifted more into an architect/analyst role at Online Business Systems as well as getting much more involved in business development. So I’m switching the focus of this blog a bit. Nothing too great, but you’ll find my posts aren’t necessarily tied to a technology or platform. Instead I’ll be focussing on current passions and interests. Solution Architecture Before a line of code is written, a solution is envisioned. The process of performing solution analysis and architecture is an intriguing process that encompasses negotiation and interpersonal skills as much as technical knowledge. Business & Entrepreneurship Creating things, building things, and working with others – business is fascinating and exciting! Entrepreneurship, and intrapreneurship, are growing trends that I’ve been exploring over the last few years through my conference (www.prairiedevcon.com) and within Online. Microsoft At Online one of my roles is “Microsoft Practice Lead” and my entire career has been built around the Microsoft stack of technologies. That focus won’t change here on my blog, and there’s tonnes of exciting new products and technologies coming out of Redmond. Adoption This is a very personal subject that’s extremely close to my heart. I’m not talking about technology adoption, I’m talking about human adoption. Almost three years ago we adopted our first daughter, Sadie, and two years ago we adopted our second daughter, Skylar; an amazing new chapter in my life as I became a “parent”. Adoption is very much misunderstood, and many people have questions about it. Hopefully I can shed some light into our experiences and provide some guidance for those that are looking into it. So come along with me as I start chronicling the next phase of my career and life.

  Read the article

• Eggnog and Oracle’s StorageTek SL150 Updates

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Looks like the holiday’s came early this year! You may remember this snazzy blog that posted a couple months back,  “Keepin’ It Simple with Storage Tek SL150”, that was based on the benefits around Oracle’s StorageTek SL150. Well, in addition to these great benefits, OPN is pleased to provide you with a complete StorageTek SL150 winter wish list that is about to come true! 1. SL150 is the only product in the Oracle portfolio, for which OPN Members can become authorized to create and provide support.  2. OPN Members can qualify for the OPN Incentive Program Rebates, without Oracle Support Attach, (provided all other criteria is met). The requirement of Premier Support Attach has been exempted for this product. 3. OPN Members who become authorized under this model will be eligible for an additional discount on parts.  4. As always Oracle’s StorageTek SL150 is Simple, Scalable and will help you Save! To add just a bit more cheer to your cup of hot coco, watch this video on why Oracle’s StorageTek SL150 Tape Library is for you! So if you haven’t done so already, contact your Oracle Channel Sales representative — let them know if you’ve been nice this year, and tell them you want to learn more! Cheers! The OPN Communications Team

  Read the article

• Spotlight on a career path: Paul, Business Development Consultant

  - by Maria Sandu

  I came to work for Oracle in November 2012 as a Customer Intelligence Representative and since then I was promoted to a Business Development Consultant, for Commercial Industries in the UK, based in Dublin. My background was primarily in Logistics, working for such companies as Indaver Ireland, Wincanton and P&O. I spent 10 years working in this industry and gained experience in negotiating with customers and suppliers in order to meet the needs of both, monitoring the quality and quantity of goods as well as the efficiency and organisation of the movement and storage of products. I decided to move from my logistics career in 2009 to study Information Technology in D.I.T. This was a challenge for me to move my career path; however the lectures at the college helped me significantly with the ability to understand how IT can have an effect on how businesses operate. Following on from college I came to work for Oracle. This also presented challenges but the training I received and the encouragement from management helped me understand that the same business rules apply no matter what background you come from. I have also learnt that using my past experience in working with customers and suppliers in Logistics has helped me understand how to meet customer’s needs. Oracle has offered me excellent training such as Sandler Sales Techniques and John Costigan. I continue to get all the training that I need to develop my career. If you’re interested in joining the Business Development Group visit http://bit.ly/oracledirectcareers or follow our CareersatOracle Facebook Community! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• BI&EPM in Focus June 2013

  - by Mike.Hallett(at)Oracle-BI&EPM

  Analyst Report from Ovum: BI bites into a bigger slice of Oracle’s Red Stack Customers INC Research Ensures 24/7 Enterprise Application Availability and Supports Rapid Expansion in Asia with Managed Cloud Services – Hyperion Planning, PeopleSoft, E-Business Suite, SOA Suite PL Developments Improves Quality and Demand Planning Accuracy, Streamlines Compliance as It Moves into Manufacturing – Hyperion Planning, OBIEE, E-Business Suite Release 12.1, Agile, Demantra Kiabi Provides Store Managers with Monthly Earnings Statements in Four Business Days to Support Continued Retail Growth – Hyperion Planning, Hyperion Financial Reporting, Hyperion Smart View for Office Speedy Cash Improves Global Financial Budgeting and Forecasting to Support Continued Company Growth - Hyperion Planning, Essbase, Hyperion Smart View for Office, Hyperion Financial Management Grupo Sports World Automates and Reduces Budget Consolidation Time by 33% for 30 Fitness Centers – Hyperion Planning Jupiter Shop Channel Automates Budgeting Processes, Enhances Visibility of Project Investments to Support Strategic Decision-Making – Hyperion Planning GENBAND Saves US$1.25 Million Annually with Automated Global Trade Management, Gains Compliance Assurance – Hyperion Financial Management, E-Business Suite Aldar Properties Consolidates and Simplifies Group Planning and Reporting for Business and Finance Structures with Integrated ERP and Business Intelligence – Hyperion Planning, Essbase, Data Integrator, OBIEE, E-Business Suite, SUN Link to Complete Archive Enterprise Performance Management Hyperion EPM 11.1.2.3 Webcast Tutorials EPM Blog: Three Technologies CFOs Need to Know About The CFO as Catalyst for Change - Part 1 The CFO as Catalyst for Change - Part 2 Actions Speak Louder in Scorecards Unlocking Business Potential with Enterprise Performance Management Business Intelligence Oracle Database 12c is launched Analysis: How to Take Big Data Advantage of Oracle Database 12c by Data-informed.com Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >