Search Results

Search found 10810 results on 433 pages for 'port forwarding'.

Page 184/433 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• OpenVPN and TomatoVPN

  - by Bill Johnson

  Wondering if someone can help me with the following. I have updated my Linksys router with TomatoVPN and used the following config: Interface Type:TAP Protocol:UDP Port:1195 Firewall Custom Authorization Mode:Static Key I have then inserted the static key generated in OpenVPN saved and started the service. connect.ovpn. # Use the following to have your client computer send all traffic through your router # (remote gateway) remote (entered my DNS/DHCP servers external IP address here) port 1195 dev tap secret static.key.txt proto udp comp-lzo route-gateway 192.168.1.1 redirect-gateway float I've then placed my static key in a file in the same directory as your connect.ovpn (static.key.txt) Now OpenVPN is installed on a laptop that I use at home. I have plugged in the laptop to my home connection and started connect.ovpn The Local Area Connection is connected as 'Home Network 3' - and when I start OpenVPN it is connected as 'Local Area Connection 2' and this is showing as 'Unidentified Network' and it appears there is no network access. TAP-Win32 Adapter V9 appears to be the adaptors name and the IP and DNS properties are set to automatic. If I open up the OpenVPN GUI it shows an error message saying "Connecting to connect has failed". Looking at the error message behind this pop-up one line says "TCP/UDP Socket bind failed on local address [undef]:1195 Address already in use [WSAEADDRINUSE] Could anyone possibly help me further with this please?

  Read the article

• mysqladmin - Unknown MySQL server host

  - by ert

  I'm trying to connect to a mysql server over a local network. The server is running and listening to post 41322. dylan~$ netstat -ln | s mysql unix 2 [ ACC ] STREAM LISTENING 41322 /var/run/mysqld/mysqld.sock My user is granted all rights from all addresses, and I can log in locally. dylan~$ mysqladmin -P 41322 -h [email protected] create database test mysqladmin: connect to server at '[email protected]' failed error: 'Unknown MySQL server host '[email protected]' (1)' Check that mysqld is running on [email protected] and that the port is 41322. You can check this by doing 'telnet [email protected] 41322' Adding a --verbose flag gives no additional output. I've commented out bind-address=127.0.0.1 in /etc/mysql/my.cnf on the server. I can ssh into the server without a problem. dylan~$ ps a | grep mysql 11131 pts/3 S 0:00 /bin/sh /usr/bin/mysqld_safe 11170 pts/3 Sl 0:03 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock 11171 pts/3 S 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld 13710 pts/1 S+ 0:00 grep mysq Any help or thoughts are appreciated.

  Read the article

• ipvsadm lists a few hosts by IP only, rest by name

  - by dmourati

  We use keepalived to manage our Linux Virtual Server (LVS) load balancer. The LVS VIPs are setup to use a FWMARK as configured in iptables. virtual_server fwmark 300000 { delay_loop 10 lb_algo wrr lb_kind NAT persistence_timeout 180 protocol TCP real_server 10.10.35.31 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.31" misc_timeout 30 } } real_server 10.10.35.32 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.32" misc_timeout 30 } } real_server 10.10.35.33 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.33" misc_timeout 30 } } real_server 10.10.35.34 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.34" misc_timeout 30 } } } http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.fwmark.html [root@lb1 ~]# iptables -L -n -v -t mangle Chain PREROUTING (policy ACCEPT 182G packets, 114T bytes) 190M 167G MARK tcp -- * * 0.0.0.0/0 w1.x1.y1.4 multiport dports 80,443 MARK set 0x493e0 62M 58G MARK tcp -- * * 0.0.0.0/0 w1.x1.y2.4 multiport dports 80,443 MARK set 0x493e0 [root@lb1 ~]# ipvsadm -L IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn FWM 300000 wrr persistent 180 -> 10.10.35.31:0 Masq 24 1 0 -> dis2.domain.com:0 Masq 24 3 231 -> 10.10.35.33:0 Masq 24 0 208 -> 10.10.35.34:0 Masq 24 0 0 At the time the realservers were setup, there was a misconfigured dns for some hosts in the 10.10.35.0/24 network. Thereafter, we fixed the DNS. However, the hosts continue to show up as only their IP numbers (10.10.35.31,10.10.35.33,10.10.35.34) above. [root@lb1 ~]# host 10.10.35.31 31.35.10.10.in-addr.arpa domain name pointer dis1.domain.com. OS is CentOS 6.3. Ipvsadm is ipvsadm-1.25-10.el6.x86_64. kernel is kernel-2.6.32-71.el6.x86_64. Keepalived is keepalived-1.2.7-1.el6.x86_64. How can we get ipvsadm -L to list all realservers by their proper hostnames?

  Read the article

• HP ProCurve & Cisco switches interoperability

  - by Kamil Z

  I have a couple of questions regarding Cisco and HP ProCurve interoperability. Here's a link to pdf with my network topology. Can someone help me with basic VLAN configuration in such topology? Below there are some details of my configuration: # m_management_2 interface FastEthernet0/43 switchport access vlan 250 switchport mode access spanning-tree port-priority 32 spanning-tree cost 100 # MTA2-swmgmt1 vlan 1 name "DEFAULT_VLAN" untagged 1-48 ip address 10.10.249.190 255.255.255.128 exit # MTA2-swtr1 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.188 255.255.255.128 exit # MTA2-swtr2 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.189 255.255.255.128 exit I don't post MTA2-bcsw[12] configuration, because I wasn's successfull in this one yet. Every time I configure VLANs on MTA2-bcsw[12] Fa0/24 interface on m_management_2 goes down bacause of receiving tagged BPDUs on access port (there are no VLANs configured on MTA2-swmgmt1 because of fact that only 250 VLAN is allowed in this switch. Is it correct?). Can someone provide me some basic configuration for this topology? Second thing I want to ask is concept of connection from MTA2-swmgmt1 to MTA2-swtr[12] HP switches for the sake of management. How to configure such ports on HP switches (managed switch and manager switch). Is my actual configuration correct?

  Read the article

• Setting up ProxyPass for a Virtualmin virtual server

  - by Andy Ibanez

  I am trying to set up my web server so that I can server multiple Ghost.org blogs. I am stuck in one crucial step. To be honest, my knowledge in servers is not so big, so I request your help to do this. Basically, a tutorial I'm reading suggests I set up a VirtualHost in this way: NameVirtualHost *:80 <VirtualHost *:80> ServerName your-url.com ServerAlias www.your-url.com ProxyRequests off ProxyPass / http://127.0.0.1:2368/ ProxyPassReverse / http:/127.0.0.1:2368/ </VirtualHost> So I have gone to the Virtual site on Virtualmin to try to add everything as is. Services Configure Website Edit Directives The problem is, the previous page (Services Configure website) says I can't edit the port: This Apache virtual host belongs to the Virtualmin server linguist.andyibanez.com, so the address, port, base directory and hostname cannot be changed here. And whenever I try to add the ProxyRequests off (the other two can be added fine) directive in Edit Directives manually, I'm simply told that the directive can't be there. So what is the right way to "add" the last three directives in the VirtualHost above to my sub server? Maybe I'm missing a menu item that will help me with this? I request your help as I have looked for a while, Google keeps thinking I want to serve Webmin via Apache when I google "Set up Virtualmin proxypass", and I have no clue what to do.

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• mysql master-master setup as a way to simply master-slave promotion

  - by Chris Go

  I'm trying to see if the following plan is viable. Goal here is to be able to do HA (uptime) and not necessarily for load -- writes are fine on one MySQL 5.5 server (with innodb) but not really possible when the database is down. Currently, I have a master-slave replication setup which works fine except it doesn't have automatic promotion (obviously). what I am planning on doing is setup master-master replication to possibly do this "automatic promotion" using Amazon Route 53 DNS Failover (Health checks). What I am trying to avoid is to NOT have to do the auto-increment trick because the "business folks" got used to the auto-incrementing PK as consecutive numbers (yeah, I know this is bad but data is from 2004). So, setup the master-master replication WITHOUT the auto-increment collision prevention bit. The primary master is db1.domain.com and secondary master is db2.domain.com In Amazon Route 53, setup DNS Failover record for db.domain.com - primary failover is db1.domain.com - with a TCP healthcheck on IP address port 3306 - secondary failover is db2.domain.com - with a TCP healthcheck on IP address port 3306 Most of the time (99%), unless tcp://db1.domain.com:3306 is dead, db1.domain.com will be served up on DNS hits to db.domain.com. In fact, hopefully this is 100%. The possible downsides of this is the loss of a primary key (collision) and I think I am OK with losing one order. We are a low data volume B2B business and can just call our client up if this occurs (like an order disappearing). Does this sound like a good plan? Then I will also run another slave replication on db1.domain.com as "master" to a slave-db1.domain.com -- not sure why, maybe for heavy SELECTs?

  Read the article

• Apache2 - mod_rewrite : RequestHeader and environment variables

  - by Guillaume

  I try to get the value of the request parameter "authorization" and to store it in the header "Authorization" of the request. The first rewrite rule works fine. In the second rewrite rule the value of $2 does not seem to be stored in the environement variable. As a consequence the request header "Authorization" is empty. Any idea ? Thanks. <VirtualHost *:8010> RewriteLog "/var/apache2/logs/rewrite.log" RewriteLogLevel 9 RewriteEngine On RewriteRule ^/(.*)&authorization=@(.*)@(.*) http://<ip>:<port>/$1&authorization=@$2@$3 [L,P] RewriteRule ^/(.*)&authorization=@(.*)@(.*) - [E=AUTHORIZATION:$2,NE] RequestHeader add "Authorization" "%{AUTHORIZATION}e" </VirtualHost> I need to handle several cases because sometimes parameters are in the path and sometines they are in the query. Depending on the user. This last case fails. The header value for AUTHORIZATION looks empty. # if the query string includes the authorization parameter RewriteCond %{QUERY_STRING} ^(.*)authorization=@(.*)@(.*)$ # keep the value of the parameter in the AUTHORIZATION variable and redirect RewriteRule ^/(.*) http://<ip>:<port>/ [E=AUTHORIZATION:%2,NE,L,P] # add the value of AUTHORIZATION in the header RequestHeader add "Authorization" "%{AUTHORIZATION}e"

  Read the article

• How to restore infrared support in Windows XP?

  - by Emil Rasmussen

  My infrared port is not working on my Windows XP SP 3 (Thinkpad X60). I can see it Device Manager, and it's status is, that it is working probably. The problem manifests in several ways. Originally I was trying to transfer data from my Polar RS800CX watch, and the Polar ProTrainer 5 software gave me the this error message: "Communication port couldn't be opened". Then I tried to connect the watch to another computer, and the infrared connection was established immediately. I then tried to connect the other computer to my Thinkpad X60. The other computer again immediately showed the Wireless Link icon "'computername' is in range" in the notification area. But nothing is shown on the Thinkpad, and a file transfer to the Thinkpad is unsuccessful with an error message that reports that "the target machine actively refused it [the connection]". This brings me to conclude that the infrared support in Windows on the Thinkpad is somehow broken. This is further supported by the fact that I can't find the "Wireless Link" icon in the Control Panel and when I try to run the irprops.cpl nothing happens. So the question is, how to reinstall the infrared support? Some of the solutions that I have explored is: I have tried to disable/enable the infrared in the BIOS - to trick a re-installation. The IR modules settings on the other computer that can get a successful IR connection is an exact match to the ThinkPad that can't get a connection. The was a problem in Windows XP SP 2 with the Wireless Link icon - MS KB article - but that hotfix can't be applied on SP 3 installation. I also guess that the hotfix is included in SP 3. Any other suggestions?

  Read the article

• error 20014 with mod_proxy

  - by punkish

  I have strange situation. I need to call a program in cgi-bin from within a perl script. When I try to do that with exec($program), I get (20014)Internal error: proxy: error reading status line from remote server proxy: Error reading from remote server returned by ... The long story... I am calling mapserv (http://mapserver.org) as a cgi program from OpenLayers (http://openlayers.org). Ordinarily, my web site is served by Perl Dancer, but the mapserver calls are made directly to http://server/cgi-bin/mapserv from JavaScript. The Dancer web site is served by Starman behind an Apache2 proxy front-end. This is how it looks [browser] -> http://server/app -> [apache2] -> proxy port 5000 -> Starman | | +-> http://server/cgi-bin/mapserv -> [apache2] -> cgi-bin -> mapserv This is what I am trying to accomplish [browser] -> http://server/app -> [apache2] -> proxy port 5000 -> Starman | | mapserv <-- cgi-bin <-- [apache2] <--+ I saw this question re: 20014 error, but that suggested solution didn't help. Any other hints?

  Read the article

• Reloading NAT configuration on a running VMWare Server 2.0.2

  - by Jonathan Clarke

  I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

  Read the article

• Not Able To Connect to Windows Server 2008 R2 using FileZilla Externally

  - by obautista

  I configured FTP Service/Role on my Windows Server 2008 R2 machine. I am able to connect from the inside, but not from the outside. On the inside I tested using cmd prompt and IE FTP. On the outside, I am testing with FileZilla and IE FTP. From the outside, IE FTP prompts me to enter my username/pwd, but nothing happens. Page eventually times out and I get "Internet Explorer cannot display page". Using FileZilla, I get the following messages. Note FileZilla resolved domain name and authenticates. I did not configure FTP Wirewall Support on the FTP site. I am not sure if I need to do this. I set up basic authentication, non-ssl, not allowing anonymous. I testing with Windows Firewall Turned off and on (I added windows firewall rule for port 21). On my network firewall (Cisco), I added a rule to forward port 21 traffic to FTP Server. Status: Resolving address of ftp.technologyblends.com Status: Connecting to 75.149.66.201:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER * Response: 331 Password required for . Command: PASS *** Response: 230 User logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: LANG EN* Response: UTF8 Response: AUTH TLS;TLS-C;SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: CCC Response: HOST Response: SIZE Response: MDTM Response: REST STREAM Response: 211 END Command: OPTS UTF8 ON Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing

  Read the article

• bind9 "error sending response: host unreachable"

  - by wolfgangsz

  of course), I have a number of DNS servers, all running bind9 (9.5.1, to be specific) under fedora. 4 of them are slaves, fed by a common master for our public DNS. These are all located on the public gateways of our various offices. One of them has tons of messages in its log files similar to these: Jul 21 17:26:18 gateway named[3487]: client 10.171.3.8#52500: view internal: error sending response: host unreachable I wonder where that comes from. The firewall is open on port 53 between the two machines (10.171.3.8 is an internal DNS server located on a Windows Domain Controller). The internal domains do NOT list the gateway as a name server (so there should not be any attempts of replicating the domains), and the gateway does not handle any internal DNS. The clients in these messages vary between the two domain controllers on the internal network and a third internal name server (running bind9 on debian in a different segment of the network). Any pointers are highly welcome. In response to the first reply: The issue with this really is that tcpdump doesn't show any problems. Here is an extract from "tcpdump -i any port 53" 09:13:38.283308 IP valine.aminocom.com.61815 ns-pri.ripe.net.domain: 14075 PTR? 166.225.58.95.in-addr.arpa. (44) 09:13:42.007410 IP gateway-eng.aminocom.com.37047 alanine.aminocom.com.domain: 35410+ PTR? 12.3.172.10.in-addr.arpa. (42) At the same time, the DNS log shows: Jul 22 09:13:38 gateway named[3487]: client 10.171.3.6#61300: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.172.3.12#56230: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.171.3.8#55221: view internal: error sending response: host unreachable Jul 22 09:13:49 gateway named[3487]: client 10.171.3.8#51342: view internal: error sending response: host unreachable So clearly at 09:13:40 there were two unsuccessful attempts to connect to internal machines (10.172.3.12 and 10.171.3.8, both are DNS servers), but nothing in the tcpdump output.

  Read the article

• r1soft agent is failing with the error: "write error while sending code: Broken pipe"

  - by curiousguy

  I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

  Read the article

• switchless Infiniband between two servers on RHEL 6.3

  - by exfizik

  I have 2 servers running RHEL 6.3 which have 2 port Infiniband cards >lspci | grep -i infini 07:00.0 InfiniBand: QLogic Corp. IBA7322 QDR InfiniBand HCA (rev 02) I'm interested in connecting them directly to each other bypassing an Infiniband switch (which I don't have). Quick googling showed that at least in some configurations it's possible. I installed all RedHat Infiniband packages with yum groupinstall "Infiniband Support". However, ibv_devinfo shows that both ports in each card are down, which indicates that cables are not connected. But the cable is connected, although the LEDs are off on the cards (not a good sign). Another source of confusion for me is that according to this, RedHat doesn't come with OFED packages and I'm slightly hesitant to install them from source due to the lack of RedHat support for them... So where am I going with this? The questions I have are: is it possible to have a switchless/direct Infiniband connection between two servers the way I described above? If it's possible, do I have to use the OFED packages or can I configure everything with just the packages coming with RHEL. Why are the LEDs off on my servers even though the cable is connected? Any additional input/advice/pointers would be appreciated. P.S. I followed this guide for installation instructions. The Infiniband cards are clearly recognized by my OS and the rdma service is running. Update: I have opensm installed. When I run it it says: OpenSM 3.3.13 Command Line Arguments: Log File: /var/log/opensm.log ------------------------------------------------- OpenSM 3.3.13 Entering DISCOVERING state Using default GUID 0x1175000076e4c8 SM port is down and stays at that point.

  Read the article

• iPhone Remote with iTunes Library via VPN

  - by sudo work

  Alright, so I'm currently behind a network router (not under my control). The router performs NAT and somehow prevents a computer from scanning other nodes. At least, you're unable, in this instance, to locate an iTunes library. You can, however, communicate with a node's open ports if the local IP address is known, as well as the port. I haven't actually tried port scanning a specific IP using nmap or another tool yet. So I've tried one solution to remove the contribution of the router entirely (to verify that it works without the influence of the routers). I set up an access point using my iPhone and tethered my computer (with the library) to it. From here, I was able to pair my library and the iPhone Remote application. Control of the library was normal as well. This solution is not ideal, however, because I am actively using bandwidth with my computer and cannot afford to be tethered to my 3G connection. A viable solution for me is to use a common VPN connection, which I have set up on a Ubuntu (Intrepid) server that is remote. Both my computer and iPhone are able to access the VPN via PPTP. The server is setup with PPTPD as the VPN-server; I'm using IPTables to perform IP masquerading and forwarding traffic. I however, still cannot connect the library to the phone. I can however, see both devices on the VPN subnet (192.168.0.0/24). SSH'ing and such works fine. What settings on the VPN server must I change to get this to work? Also, how can I assign static IP addresses to various PPTP clients based on MAC addresses?

  Read the article

• Unable to add datasource in ColdFusion 9 and SQL Server 2008 R2

  - by Evik James

  I just installed SQL Server 2008 R2 and ColdFusion 9.0.1 on my Windows 7 machine for development use only. I have ColdFusion running well and serving pages (that aren't connected to a database). I can view my databases in SQL Server Management Studio. I successfully restored a few small databases and now I am trying to set up datasources for them through the ColdFusion Administrator. On my other machine, this was super easy. Not so much this time. The database I just added is named "Test". I am getting this error: Connection verification failed for data source: Test java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect It looks like the connection between ColdFusion and SQL Server is being refused. I know, brilliant observation, right? On my other machine, I was able to create datasources with just the default settings, no server name, username, or password. Any clue as to what might be the cause and how I might fix it?

  Read the article

• Boot iMac into Centos from external hard drive

  - by user1704978

  I have Centos 6.3 installed on an external Western Digital drive with Firewire and USB interfaces. I want to be able to boot an iMac (2008, 3.06GHz Core 2 Duo) from this disk. The iMac has Mac OS X 10.5.8 and also a Window XP installation. I have tried holding 'T' on bootup for target disk mode but the external disk is ignored (presumably as it's not a Mac OSX image). I created an rEFit boot DVD which when booted in CD mode (holding 'C' on startup) displays three options, Mac OS (on internal drive), Linux and Windows. Selecting the Linux option unfortunately boots the Mac into XP. Three options are only displayed when the external disk is plugged into the Firewire port. If the external disk is plugged into a USB port the Linux option is not displayed and I can only boot into Mac OS X or Windows. This external disk will happily boot a Lenovo T410 laptop into Centos. My questions are: 1) Is it actually possible to boot into Centos on an iMac with an external hard drive. If so how do I achieve this? 2) Why is rEFit apparently booting from the wrong partition?

  Read the article

• ZFS: Mirror vs. RAID-Z

  - by John Clayton

  I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

  Read the article

• Problem running mysql client, cannot connect to mysql server

  - by ehsanul

  Edit3: Thanks for the help everyone. Sorry for wasting anybody's time, but it seems like a simple reboot solved it. I should've known better, but I just had the assumption that the "restart" solution is mostly valid just for MS Windows (no offense). I'll keep this in mind before I ask a question here again. I installed the mysql-client-5.0 and mysql-server-5.0 packages on Ubuntu 8.04, using sudo apt-get install. When I try to run the "mysql" command, I get the following error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) To verify that mysql server is running, I tried this, and it does seem to be running, with the correct socket too: $ ps aux | grep mysql root 13388 0.0 0.0 1772 528 ? S 06:24 0:00 /bin/sh /usr/bin/mysqld_safe mysql 13553 0.0 1.4 127012 15332 ? Sl 06:25 0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock root 13555 0.0 0.0 3008 696 ? S 06:25 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld ehsanul 16910 0.0 0.0 3092 772 pts/4 R+ 07:17 0:00 grep mysql So I don't understand why I'm getting an error trying to connect to mysql server. Note that I'm completely new to mysql. Edit: As requested in comments, the exact command that is returning the error is simply "sudo mysql". And when I check netstats for active networks services, I do see an entry for port 3306, with Protocol: tcp, IP Source: 127.0.0.1, State: LISTEN Edit2: It appears as if the /var/run/mysqld/mysqld.sock socket doesn't exist (if I'm interpreting the following output correctly): $ ls -al /var/run/mysqld/ total 0 drwxr-xr-x 2 mysql root 40 2009-08-06 06:36 . drwxr-xr-x 20 root root 860 2009-08-06 06:25 ..

  Read the article

• How can I add a wireless router to a wired router?

  - by Tester101

  The Setup: wired D-link (EBR-2310) router connected to my cable modem. Wireless NetGear N300 (WNR2000v3) router connected to a LAN port on the wired router. What I'm trying to do: I'm trying to setup the wireless router to be a separate network, that only accesses the internet through the wired router. What I've done so far. I setup the wireless router's WAN port to get an address from ISP (which should be coming from my wired router running DHCP), and the LAN as a subnet (192.168.1). Wired router's LAN is 192.168.0. The problem: I'm not able to connect to the internet from the wireless router. At one point my wired router showed that it was handing out an IP to the wireless router, but that is not happening anymore. The question: Is what I'm trying to do possible? Am I not thinking about this properly? Do I need to buy a better wired router, with 2 WAN ports? How can I configure these routers to work together?

  Read the article

• Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

  - by James

  First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

  Read the article

• configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

  - by Wayne

  vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

  Read the article

• Setting up AJP with JBoss 7

  - by purlogic

  I have two different versions of JBoss on a server, JBoss 6.0 Final and JBoss 7.0.2. I can one run or the other by switching a couple of sym links and issuing a "service jboss start" command. I am, by no means, an expert in JBoss, however JBoss 6.0 appears to have AJP running out of the box with no initial configuration required on port 8009. With JBoss 7, however, I had to vi the file "standalone/configuration/standalone.xml" and add a few entries. Those entries are: In the <subsystem /> tag, I added: <connector name="ajp" protocol="AJP/1.3" socket-binding="ajp" /> In the <socket-binding-group /> tag I added: <socket-binding name="ajp" port="8009"/> Then in Apache's configuration file (httpd.conf), I added: <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> ProxyPass /app ajp://localhost:8009/app ProxyPassReverse /app ajp://localhost:8009/app AJP proxying works with 6, not with 7... I assume it's because I haven't properly set up AJP in JBoss 7 and not entirely sure how to do that. I have searched documentation on their site with not a lot of specifics on how to do so. Any help or insight into setting up AJP with JBoss 7 would be much appreciated!!

  Read the article

• AjaxControlToolkit JavaScript is not pointing correctly on IIS7 running behind Apache mod_proxy

  - by sohum

  So here's my setup. I've got a DynDNS account since I have a dynamic IP. I have Apache listening on port 80 and IIS7 on port 8080. I don't want users to have to enter in mydyndns.dyndns.com:8080 to get to IIS7, so I've added the following code to my Apache httpd.conf file to enable a proxy/reverse proxy: <VirtualHost *:80> ProxyPass / http://localhost:8080/myASPSite/ ProxyPassReverse / http://localhost:8080/myASPSite/ ServerName myaspsite.mydomain.com </VirtualHost> I've got a CNAME record set up on my DNS so that myaspsite.mydomain.com redirects to mydyndns.dyndns.com. When I type in myaspsite.mydomain.com into my browser, everything works beautifully... mostly. IIS7 serves up the ASPX pages and visitors to the site don't know any better. A problem arises, however, when I add Ajax Control Toolkit controls into my ASPX website, because these generate JavaScript and apparently mod_proxy_html isn't geared to handle the JS URIs properly. Sure enough, when I open up the source of my ASPX page, it has script elements as follows: <script src="/myASPSite/WebResource.axd?xyz" type="text/javascript"></script> <script src="/myASPSite/ScriptResource.axd?xyz" type="text/javascript"></script> Sure enough, these scripts are attempting to be resolved at http://myaspsite.mydomain.com/myASPSite/WebResource..., which through the proxy translates to localhost:8080/myASPSite/myASPSite/.... How can I solve this problem. The couple of websites I found suggested turning on ProxyHTMLExtended but when I tried doing that, the server did not start. I'm guessing I didn't know how to do it properly. Anyone has a handy couple of config lines that I can add to my Apache conf file to get this working as I need? I'm using Apache 2.2.11. Thanks!

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >