Search Results

Search found 5124 results on 205 pages for 'searching'.

Page 184/205 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

  • Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

    - by LOGIC9
    Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

    Read the article

  • Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

    - by linni
    I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

    Read the article

  • Troubleshooting an unstable internet connection

    - by Konrad Rudolph
    My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

    Read the article

  • Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

    - by linni
    I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

    Read the article

  • HP F2180 driver installation fails on 64-bit Windows 7

    - by Noam Gal
    Hello; I am trying to install the HP Deskjet AIO (non-network) driver on my machine, which is running the 64-bit version of Windows 7. Before installing it, Windows detected my printer just fine... But I wanted to use the HP scanning application, because tt allows me to scan several photos at once. I ran the DJ_AIO_NonNetwork_ENU_NB file I got from their site, and the installation went almost without a problem... However, at the part where it should have detected the printer, it didn't, so I skipped it - telling the installer I'll connect the printer later. After it was finished I was able to use it regularly, and also scan using the wanted HP application. However, the installer kept popping at random intervals, and giving me an error message. Yesterday I tried removing all the installed HP Applications, and installing from scratch. Running the same installer setup, it now insists that it does not support my operating system, and that 64-bit Vista is the highest it can go... I just don't understand why this is occuring all of the sudden. Has anybody here successfully installed the AIO driver on the 64-bit version of Windows 7? UPDATE: Been chatting with HP chat support over the weekend. Managed to really mess up my windows. At first, they told me to uninstall using an "unintall_l3" batch file inside their installer package, and then reinstall. Didn't work. Also the "l4" batch didn't make any difference. Afterwards I was told to install "Windows install clean up" and remove many hp entries (most of which were not listed on my computer), and I also removed many other hp entries I bumped upon. Then my office 2k7 started failing. I searched around the web, and ran Security Restore, so now my office works, but my windows explorer is all buggy - can't seem to open windows explorer - it hangs while trying to load my hard drives, or completely ignores them and just shows my libraries. Anyone here has any idea how I can restore my win7 to normal, with or without the annoying scanner? UPDATE 2: Ok - explorer back to normal. I guess I just had to wait until it finishes searching while opening the windows explorer for the first time after the Security Restore. Scanner still not working though.

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • a hidden program (virus) send hundred e-mail - Can you have any experience on something similar ?

    - by Aristos
    In one tablet computer yesterday I make the usually automatic updates from ms. This tablet have comodo firewall, and and old nod32. After that I notice very soon, that something start sending hundred smtp e-mail the moment the tablet computer is connected to the internet. Also the previous t time I have make updates, some 'virus' gets on the computer but I find very easy and stop it from run. I find using the autostart from sysinternals, and the process explorer. This virus has also break the automatic update from ms, and lost a lot of time to fix it. This is my usually practice when some call me to delete a virus from xp, I use the process explorer and autostart to locate the program, and delete it from everywhere. How ever the last one is so hard to locate. 0.I delete everything from temp directorys and search for suspicious files everywhere, run the nod32, 1.I use the TCPView to see witch program sending the smpt (I see hundred open smpt connections sending emails) but the SMTP was opened by the main service program. 2. I use the process monitor to locate whats happens but find again the main service that do the job. 3.I start delete many thinks on process explorer, but did not found the one that send the emails 4.I open many times the autorun but did not find there also something suspicion, I stop some thinks, but nothing happends. 5.From the last time that I suspect that this virus come to my computer and I partial remove it, he has broke my windows update, to fix it I lost a lot of time, searching on Internet for the error - it was just a register to a dll. 6.From what I suspect something is trigger after the ms update. 7.For the moment I block the email ports, and try to find a way to locate it. I like to notice here that everything is genius - and I mean everything. I believe that this virus pass from a page, or from an e-mail that this computer receive it in the past. Any help or information are appreciate. If you know anything similar, if you know how this virus send emails and how can I locate it, if you know any anti-virus anti-spyware program that maybe can find it. If you know how a virus gets after the ms updates. Million thanks.

    Read the article

  • Active Directory Partition Error

    - by BLAKE
    Right now my active directory is failing a dcdiag test. I can find no info online about this error. When I run dcdiag /test:crossrefvalidation, I get the output: .... Doing primary tests Testing server: Default-First-Site-Name\ad01 Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : mydomain Starting test: CrossRefValidation ......................... mydomain passed test CrossRefValidation Running partition tests on : t Starting test: CrossRefValidation This cross-ref has a non-standard dNSRoot attribute. Cross-ref DN: CN=a3a24d3a-4782-460b-9148-86ac2d86b9ae,CN=Partitions,CN=Configuration, DC=mydomain,DC=com nCName attribute (Partition name): DC=t Bad dNSRoot attribute: dc01.mydomain.com Check with your network administrator to make sure this dNSRoot attribute is correct, and if not please change the attribute to the value below. dNSRoot should be: t It appears this partition (DC=t) failed to get completely created. This cross-ref (CN=a3a24d3a-4782-460b-9148-86ac2d86b9ae,CN=Partitions,CN=Configurat ion,DC=mydomain,DC=com) is dead and should be removed from the Active Directory. ......................... t failed test CrossRefValidation .... I used LDP from the windows support tools. I searched for the dnsRoot attribute in "cn=partitions,cn=configuration,dc=mydomain,dc=com", with the filter "(&(objectcategory=crossref)(systemFlags:1.2.840.113556.1.4.803:=5))" I got the result: ***Searching... ldap_search_s(ld, "cn=partitions,CN=Configuration,DC=mydomain,DC=com", 1, "(& (objectcategory=crossref)(systemFlags:1.2.840.113556.1.4.803:=5))", attrList, 0, &msg) Result <0>: (null) Matched DNs: Getting 3 entries: >> Dn: CN=65502be3-fc90-442a-83d8-4b3b91e82439,CN=Partitions,CN=Configuration,DC=mydomain,DC=com 1> dnsRoot: ForestDnsZones.mydomain.com; >> Dn: CN=a3a24d3a-4782-460b-9148-86ac2d86b9ae,CN=Partitions,CN=Configuration,DC=mydomain,DC=com 1> dnsRoot: ad01.mydomain.com; >> Dn: CN=f0ef5771-6225-4984-acd9-c08f582eb4e2,CN=Partitions,CN=Configuration,DC=mydomain,DC=com 1> dnsRoot: DomainDnsZones.mydomain.com; It looks like the bad partition has the name of my first domain controller 'ad01.mydomain.com'. I have googled for a while and have not been able to find any help or documentation about application partitions in Active Directory. Does anyone have any advice on how to cleanup this partition (or what the partition is for)? Does anyone know the repercussions for deleting this partition?

    Read the article

  • IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well.

    - by Thomas
    Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

    Read the article

  • Areca 1280ml RAID6 volume set failed

    - by Richard
    Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

    Read the article

  • Where to get laptop replacement parts?

    - by wai
    I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

    Read the article

  • JNDI Datasource Problem on Tomcat 6, Hibernate

    - by Asuman AKYILDIZ
    Hello; I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

    Read the article

  • How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

    - by Pascal Bourque
    I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

    Read the article

  • List repositories from multiple projects in Trac using mod_python

    - by Steffen Eriksen
    Currently working on a customized webpage that shows the available projects I have in Trac (1.0.1). I am using mod_python to connect the trac interface. I found a standard page for this, but it didn't show listing of repositories. The page showed some variables to link to the different projects, but I can't find variables to the different repositories inside the projects. I have set up the webpage from reading this: http://trac.edgewall.org/wiki/TracInterfaceCustomization (under Site Appearance) Short summary; editing ../conf.d/trac.conf: PythonOption TracEnvParentDir /parent/dir/of/projects PythonOption TracEnvIndexTemplate /path/to/template And making a template file I can edit at /path/to/template: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:py="http://genshi.edgewall.org/" xmlns:xi="http://www.w3.org/2001/XInclude"> <head> <title>Available Projects</title> </head> <body> <h1>Available Projects</h1> <ul> <dl> <li py:for="project in projects" py:choose=""> <a py:when="project.href" href="$project.href" title="$project.description">$project.name</a> ## <dd> WANT TO ADD CODE HERE! </dd> <py:otherwise> <small>$project.name: <em>Error</em> <br /> ($project.description)</small> </py:otherwise> </li> </dl> </ul> </body> </html> So... The code I want to add is something like: <dd py:for="repos in project.repository" py:choose=""> <a py:when="repos.href" href="$repos.href"> $repos.name</a> </dd> I can't figure out where to add the variables, or if there already exists some variables I can use. After searching through the files it seemed like main.py had something to do with the variables (/usr/local/Trac-1.0.1/trac/web/main.py), but at first look it didn't seem easy to just add more variables. Is there a simple way to find the rest of the variables ? And how hard is it to add more variables? Will it perhaps be easier to do this an alternative way ? All I need is to link to the repositories dynamically

    Read the article

  • Postfix: How to apply header_checks only for specific Domains?

    - by Lukas
    Basically what I want to do is rewriting the From: Header, using header_checks, but only if the mail goes to a certain domain. The problem with header_check is, that I can't check for a combination of To: and From: Headers. Now I was wondering if it was possible to use the header_checks in combination with smtpd_restriction_classes or something similar. I've found a lot information about header_checks and multiple header fields, when searching the net. All of them basically telling me, that one can't combine two header for checking. But I didn't find any information if it was possible to only do a header check if a condition (eg. mail goes to example.com) was met. Edit: While doing some more Research I've found the following article which suggests to add a Service in postfix master.cf, use a transportmap to pass mails for the Domain to that service and have a separate header_check defined with -o. The thing is that I can't get it to work... What I did so far is adding the Service to the master.cf: example unix - - n - - smtpd -o header_checks=regexp:/etc/postfix/check_headers_example Adding the followin Line to the transportmap: example.com example: Last but not least I have two regexp-files for header checks, one for the newly added service, and one to redirect answers to the rewritten domain. check_headers_example: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 Obviously if someone answers, the mail would go to nirvana, so I have the following check_headers defined in the main postfix process: /To:(.*)<(.*)@mydomain.example.com>(.*)/ REDIRECT [email protected]$2 Somehow the Transport is ignored. Any help is appreciated. Edit 2: I'm still stuck... I did try the following: smtpd_restriction_classes = header_rewrite header_rewrite = regexp:/etc/postfix/rewrite_headers_domain smtpd_recipient_restrictions = (some checks) check_recipient_access hash:/etc/postfix/rewrite_table, (more checks) In the rewrite_table the following entries exist: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 All it gets me is a NOQUEUE: reject: 451 4.3.5 Server configuration error. I couldn't find any resources on how you would do that but some people saying it wasn't possible. Edit 3: The reason I asked this question was, that we have a customer (lets say customer.com) who uses some aliases that will forward mail to a domain, let's say example.com. The mailserver at example.com does not accept any mail from an external server that come from a sender @example.com. So all mails that are written from example.com to [email protected] will be rejected in the end. An exception on example.com's mailserver is not possible. We didn't really solve this problem, but will try to work around it by using lists (mailman) instead of aliases. This is not really nice though, nor a real solution. I'd appreciate all suggestions how this could be done in a proper way.

    Read the article

  • Legacy VB6 application under Win7 SQL error

    - by Shial
    We have a rather unfortunate legacy application at work, written originally in VB6 it predates anybody in our IT department by at least 5 years. We have a contracted developer for ongoing maintenance and where he can he rewrites sections over into .NET code (Not sure about his techniques here, this is a side job for his regular work as an IBM engineer) the application works fine (such as it is) under windows XP. We have only a couple of Windows 7 machines mainly for testing and this application seems to run into a wall. Things like the background not loading and SQL errors. This is even running under administrator. Running an SQL trace from the ODBC control panel shows several interesting things. It makes a connection to the database successfully initially where it runs a query to determine if it is running the correct version. This query works fine. 558-1af0 ENTER SQLExecDirectW HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 BMS 558-1af0 EXIT SQLExecDirectW with return code 1 (SQL_SUCCESS_WITH_INFO) HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 It then seems to drop its connection and can't find the ODBC connection despite the fact its connecting to the same DB. From the trace it looks like it configures the connection then it starts firing off SQLFreeStmt to unbind and close out then when in the application and it tries to do its thing there is no connection. 558-1af0 ENTER SQLFreeStmt HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> BMS 558-1af0 EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS) HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> Then this happens when I try to do something that pulls data 558-1af0 ENTER SQLDriverConnectW HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> BMS 558-1af0 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR) HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> DIAG [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (0) Nearly all of my searching on this issue comes up with programming issues where the connection string has a problem. The only thing that is different in this particular scenario though is Windows 7, I know the connection string is fine since it works on the XP machines. The VB components are supposed to be still functional under Win7. My computer is running 32 bit win7 and my VP is running Win7 64 bit and both have the same problem so that can be ruled out. I have already tried reinstalling the SQL Native Client and the VB runtime as well as the application in question. Hopefully I can find a solution and not have to resort to using the XP VM.

    Read the article

  • HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

    - by Jaime
    Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

    Read the article

  • Changing default datadirectory to one on a External NAS or add external share

    - by Hagbart Celine
    So I have been searching the web for days, looking for a solution to my problem. Now my only hope are you guys. I have installed Owncloud successfully on my Windows Server 2008R2. It all runs smoothly and I can connect without problems. So first checks are OK. Now I wanted to change the default data directory from my server to a shared folder on my NAS (Synology DS1813+, DSM 5.0-4493 Update 3). Tried following: changing the directory in config.php I changed the path in the config file from : "C:\inetpub\wwwroot\myfolder\data" to "\NASIP\cloud". by doing this the owncloud server only shows: Code: Select all Daten-Verzeichnis (\192.168.2.4\Cloud\data) ist ungültig Bitte stelle sicher, dass das Daten-Verzeichnis eine Datei namens ".ocdata" im Wurzelverzeichnis enthält. I also tried coping the files that were created in the local data storage, to the share on the NAS. No Luck. Now I tried it by mapping a network drive and using that in the config.php But still no luck. I get the same message with the missing .ocdata file. Now I tried the "External Storage APP" that comes with owncloud I thought that at least I could add the share as an external storage. But this also does not work. tried UNC, Mapped Drive Name (Z:) but nothing helped. So now I'm turning to you.. Does anyone have expirience with this kind of setup? Or can you even tell me how to make it work? (default or external storgae, I don't care anymore ) Using NAS (Synology DS1813+, DSM 5.0-4493 Update 3), Owncloud 7, Windows Server 2008 R2, IIS7 I got an answer on an other forum: The second option is how it should be done: 1. Put OC in maintenance mode 2. Mount (mapping in the windows world) your NAS directly to your OS 3. Copy the local data directory to the NAS mount 4. Ensure the permission is setup to give the web user access to the NAS mount 5. Update OC config.php with the new data path 6. Disable OC maintenance mode And this seems like the right way.. Ensure the permission is setup to give the web user access to the NAS mount I guess this is where I am not sure. What user is it exactly on my Server that is making the requests to the NAS? If the user is for example "IUSR" I can just create an account on my synology NAS and give him full access to my share? (But what is IUSRs password?) I have full root ssh access to my NAS, so if you can tell me what chmod or chown I need to use on my cloud folder...

    Read the article

  • Empty $_POST data

    - by Antimony
    I am trying to post a post to my MyBB server from a Python script, but try as I might, I can't get it to work. The request shows up in the forensic log and the headers are in the $_SERVER variable, but $_POST is always an empty array. The error log shows nothing, even at the debug level. I've already tried searching, but I haven't found anything that's helped. I already checked the post_max_size thing, which is 8M. Another factor is that it's just my own requests which aren't going through. Browser generated requests seem to do just fine. I've looked and looked, but I can't find anything I'm doing differently that should matter. Anyway, here is an example request. POST /newreply.php?tid=1&processed=1 HTTP/1.1 Host: <redacted> Accept-Encoding: identity Content-Length: 1153 Content-Type: multipart/form-data; boundary=-->0xa216654L Cookie: sid=<redacted>; mybb[lastvisit]=1354995469; mybb[lastactive]=1354995500; mybb[threadread]=a%3A1%3A%7Bi%3A1%3Bi%3A1354995469%3B%7D; mybb[forumread]=a%3A1%3A%7Bi%3A2%3Bi%3A1354995469%3B%7D; loginattempts=1; mybbuser=2_ZlVVfaYS9FstZGQzr4KiNRUm3Z4xAgJkTPPq2ouFcuaragOTVQ Accept: text/html User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:14.0) Gecko/20100101 Firefox/14.0.1 -->0xa216654L Content-Disposition: form-data; name="my_post_key" 257b2bbef4334000d9088169154900a3 -->0xa216654L Content-Disposition: form-data; name="quoted_ids" -->0xa216654L Content-Disposition: form-data; name="tid" 1 -->0xa216654L Content-Disposition: form-data; name="message" foo!2 -->0xa216654L Content-Disposition: form-data; name="attachmentact" -->0xa216654L Content-Disposition: form-data; name="attachmentaid" -->0xa216654L Content-Disposition: form-data; name="icon" -1 -->0xa216654L Content-Disposition: form-data; name="posthash" e93a2c78ce3f6807a86fd475ef4178cf -->0xa216654L Content-Disposition: form-data; name="postoptions[subscriptionmethod]" -->0xa216654L Content-Disposition: form-data; name="replyto" -->0xa216654L Content-Disposition: form-data; name="message_new" foo!2 -->0xa216654L Content-Disposition: form-data; name="submit" Post Reply -->0xa216654L Content-Disposition: form-data; name="attachment"; filename="" Content-Type: application/octet-stream -->0xa216654L Content-Disposition: form-data; name="action" do_newreply -->0xa216654L Content-Disposition: form-data; name="subject" Lol -->0xa216654L

    Read the article

  • Partition table corrupted (USB flash drive)

    - by 13ren
    It's an 8 GB Patriot thumb drive, which I've used extensively with lots of data. Today, it is detected, but all data is gone: (EDIT at least some data is still there, but the partition table is gone) EDIT @Sathya (thanks) here's the relevant output from sudo fdisk -l: Disk /dev/sdc: 8019 MB, 8019509248 bytes 247 heads, 62 sectors/track, 1022 cylinders Units = cylinders of 15314 * 512 = 7840768 bytes Disk /dev/sdc doesn't contain a valid partition table It looks like it is /dev/sdc, with that 8 GB... and no partition table. I tried to mount /dev/sdc (and then dmesg | tail): /media> sudo mount /dev/sdc mytmp mount: wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so /media> dmesg | tail [ 24.300000] sdc: unknown partition table [ 24.320000] sd 2:0:0:0: Attached scsi removable disk sdc [ 24.370000] usb-storage: device scan complete [ 26.870000] EXT2-fs error (device sdc): ext2_check_descriptors: Block bitmap for group 1 not in group (block 0)! [ 26.870000] EXT2-fs: group descriptors corrupted! [ 50.420000] unhashed dentry being revalidated: .DCOPserver_eeepc-brendanma__0 [ 50.430000] unhashed dentry being revalidated: .DCOPserver_eeepc-brendanma__0 [ 50.430000] unhashed dentry being revalidated: .DCOPserver_eeepc-brendanma__0 [ 5565.470000] EXT2-fs error (device sdc): ext2_check_descriptors: Block bitmap for group 1 not in group (block 0)! [ 5565.470000] EXT2-fs: group descriptors corrupted! EDIT @Col: results from testdisk Disk /dev/sdc - 8013 MB / 7642 MiB - CHS 1022 247 62 Current partition structure: Partition Start End Size in sectors Partition sector doesn't have the endmark 0xAA55 After I hit [proceed], it says: Structure: Ok. Keys A: add partition, L: load backup, Enter: to continue The "Structure: Ok." seems reassuring... will "A: add partition" make my old data accessible (if it's still there), or will it make a new, fresh partition? Another option is "[ MBR Code ] Write TestDisk MBR code to first sector" - would it be better to do this? EDIT I found that at least some of my data is still on the flash drive, by using the below, and searching for English text in less (like " the "): cat /dev/sde | tr -cd '\11\12\40\1540-\176' | less (The drive changed from "/dev/sdb" to "/dev/sde" because I connected some extra drives today). I've learnt that "/dev/sde1" would be the first partition; and "/dev/sde" is the whole drive. Because unix treats these devices just like files, you can use all the ordinary unix file commands on them, like cat, and then process them like any other stream of data. The tr above removes non-printable characters ("\40" is space, which I wanted to preserve). In less, you can use "/" to search, similar to Vim. How can I get my data back (assuming it's still there)? If only the partition table is corrupted, is there a standard "partition recovery tool"? Is there a way to "repartition" without deleting everything?

    Read the article

  • How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

    - by Pascal Bourque
    I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

    Read the article

  • IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well

    - by Thomas
    Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

    Read the article

  • ruby on rails gitorious setup on ubuntu

    - by dogmatic69
    Ive been trying to install gitorious for a while now which required ruby and rails etc. Ive finally got rails pages serving but cant finish the installation of gitorious because the gem version is too new. the error logs say please run 'rake ultrasphinx:configure' and that gives rake ultrasphinx:configure (in /var/www/apps/gitorious) rake aborted! uninitialized constant ActiveSupport::Dependencies::Mutex /var/www/apps/gitorious/Rakefile:10:in `require' (See full trace by running task with --trace) From searching google this is beacuse of the wrong gem verison. Cant find a way to down grade it. apparently sudo gem update --system 1.4.2 should do the trick but ubuntu 10.10 does not like this. ERROR: While executing gem ... (RuntimeError) gem update --system is disabled on Debian, because it will overwrite the content of the rubygems Debian package, and might break your Debian system in subtle ways. The Debian-supported way to update rubygems is through apt-get, using Debian official repositories. If you really know what you are doing, you can still update rubygems by setting the REALLY_GEM_UPDATE_SYSTEM environment variable, but please remember that this is completely unsupported by Debian. So i added export REALLY_GEM_UPDATE_SYSTEM=1 to .bashrc and reloaded it with . ~/.bashrc and still the same. ive tried various forms of setting this environmental variable with no luck. Ive also been told on #gitorious irc channel to add the file config/initializers/rubygems.rb with the line require "thread" to it. This has done nothing. EDIT: Just found another way which was rvm install rubygems 1.4.2 and it gave: Removing old Rubygems files... Installing rubygems dedicated to ruby-1.8.7-p334... Retrieving rubygems-1.4.2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 288k 100 288k 0 0 282k 0 0:00:01 0:00:01 --:--:-- 414k Extracting rubygems-1.4.2 ... Installing rubygems for /home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby ERROR: Error running 'GEM_PATH="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global" GEM_HOME="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334" "/home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby" "/home/ubuntu/.rvm/src/rubygems-1.4.2/setup.rb"', please read /home/ubuntu/.rvm/log/ruby-1.8.7-p334/rubygems.install.log WARN: Installation of rubygems did not complete successfully. TL;DR please tell me how to downgrade rubygems on ubuntu 10.10 or upgrade gitorious to work with 1.6.2 gems

    Read the article

  • kvm and qemu host: Is there a limit for max CPUs (Ubuntu 10.04)?

    - by Valentin
    Today we encountered a really strange behaviour on two identical kvm and qemu hosts. The host systems each have 4 x 10 Cores, which means that 40 physical cores are displayed as 80 within the operating system (Ubuntu Linux 10.04 64 Bit). We started a Windows 2003 32 Bit VM (1 CPU, 1 GB RAM, we changed those values multiple times) on one of the nodes and noticed that it took 15 minutes until the boot process began. During those 15 minutes, a black screen is shown and nothing happens. libvirt and the host system show that the qemu-kvm process for the guest is almost idling. stracing this process only shows some FUTEX entries, but nothing special. After those 15 minutes, the Windows VM suddenly starts booting and the Windows logo occurs. After a few seconds, the VM is ready to be used. The VM itself is very performant, so this is no performance issue. We tried to pin the CPUs with the virsh and taskset tools, but this only made things worse. When we boot the Windows VM with a Linux Live CD there is also a black screen for several minutes, but not as long as 15. When booting another VM on this host (Ubuntu 10.04) it also has the black screen problem, and also here the black screen is only shown for 2-3 minutes (instead of 15). So, summerinzing this: Each guest on each of those identical nodes suffers from idling a few minutes after being started. After a few minutes, the boot process suddenly starts. We have observed that the idling time happens right after the bios of the guest was initialized. One of our employees had the idea to limit the amount of CPUs with maxcpus=40 (because of 40 physical cores existing) within Grub (kernel parameter) and suddenly the "black-screen-idling"-behaviour disappeared. Searching the KVM and Qemu mailing lists, the internet, forums, serverfault and other various sites for known bugs etc. showed no useful results. Even asking in the dev IRC channels brought no new ideas. The people there recommend us to use CPU pinning, but as stated before it didn't help. My question is now: Is there a sort of limit of CPUs for a qemu or kvm host system? Browsing the source code of those two tools showed that KVM would send a warning if your host has more than 255 CPUs. But we are not even scratching on that limit. Some stuff about the host system: 3.0.0-20-server kvm 1:84+dfsg-0ubuntu16+0.14.0+noroms+0ubuntu4 kvm-pxe 5.4.4-7ubuntu2 qemu-kvm 0.14.0+noroms-0ubuntu4 qemu-common 0.14.0+noroms-0ubuntu4 libvirt 0.8.8-1ubuntu6 4 x Intel(R) Xeon(R) CPU E7-4870 @ 2.40GHz, 10 Cores

    Read the article

  • Hell: NTFS "Restore previous versions"...

    - by ttsiodras
    The hell I have experienced these last 24h: Windows 7 installation hosed after bluetooth driver install. Attempting to recover using restore points via "Repair" on the bootable Win7 installation CD. Attempting to go back one day in the restore points. No joy. Attempting to go back two days in the restore points. No joy. Attempting to go back one week in the restore points. Stil no joy. Windows won't boot. Apparently something is REALLY hosed. And then it hits me - PANIC - the restore points somehow reverted DATA files to their older versions! Word, Powerpoint, SPSS, etc document versions are all one week old now. Using the "freshest" restore point. Failed to restore yesterday's restore point!!! I am stuck at old versions of the data!!! Booting KNOPPIX, mounting NTFS partition as read-only under KNOPPIX. Checking. Nope, the data files are still the one week old versions. Booting Win7 CD, Recovery console - Cmd prompt - navigating - yep, data files are still one week old. Removing the drive, mounting it under other Win7 installation. Still old data. Running NTFS undelete on the drive (read-only scan), searching for file created yesterday. Not found. Despair. At this point, idea: I will install a brand new Windows installation, keeping the old one in Windows.old (default behaviour of Windows installs). I boot the new install, I go to my C:\Data\ folder, I choose "Restore previous versions", click on yesterday's date, and click open... YES! It works! I can see the latest versions of my files (e.g. from yesterday). Thank God. And then, I try to view the files under the "yesterday snapshot-version" of c:\Users\MyAccount\Desktop ... And I get "Permission Denied" as soon as I try to open "Users\MyAccount". I make sure I am an administrator. No joy. Apparently, the new Windows installation does not have access to read the "NTFS snapshots" or "Volume Shadow Snapshots" of my old Windows account! Cross-installation permissions? I need to somehow tell the new Windows install that I am the same "old" user... So that I will be able to access the "Users\MyAccount" folder of the snapshot of my old user account. Help?

    Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >