Search Results

Search found 5088 results on 204 pages for '3 5mm audio jack'.

Page 185/204 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• ATG Live Webcast Nov. 8th: Advanced Management of EBS with Oracle Enterprise Manager

  - by Bill Sawyer

  The task of managing and monitoring Oracle E-Business Suite environments can be very challenging. The Application Management Pack plug-in is part of Oracle Enterprise Manager 12c Application Management Suite for Oracle E-Business Suite. The Application Management Pack plug-in is designed to monitor and manage all the different technologies that constitute Oracle E-Business Suite applications, including midtier, configuration, host, and database management—to name just a few. Customers that have implemented Oracle Enterprise Manager have experienced dramatic improvements in system visibility, diagnostic capability, and administrator productivity. This webcast will highlight the key features and benefits of Oracle Enterprise Manager, the latest version of the Oracle Application Management Suite for Oracle E-Business Suite. Advanced Management of Oracle E-Business Suite with Oracle Enterprise Manager Date:                Thursday, November 8, 2012Time:               8:00 AM - 9:00 AM Pacific Standard TimePresenters:   Angelo Rosado, Principal Product Manager, E-Business Suite ATG                         Lauren Cohn, Principal Curriculum Developer, E-Business Suite ATGWebcast Registration Link (Preregistration is optional but encouraged)To hear the audio feed:   Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              103191To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  591460967 If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here. If you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com.

  Read the article

• 2012 EC Election Ballot open; Meet the Candidates Call tomorrow

  - by heathervc

  The JCP Executive Committee (EC) Election ballot is now open and all of the candidates' nominations materials are now available on JCP.org -- note that two new candidates were nominated late last week:  Liferay and North Sixty-One. It is shaping up to be an exciting election this year! The ratified candidates are:  Cinterion, Credit Suisse, Fujitsu and HP.The elected candidates are (9 candidates, 2 open seats):  Cisco Systems, CloudBees, Giuseppe Dell'Abate, Liferay, London Java Community, MoroccoJUG, North Sixty-One, Software AG, and Zero Turnaround. Tomorrow, 18 October, we will hold an open teleconference for the Java Community to meet the candidates and ask questions regarding their nomination.  We hope you will be able to participate in the call.  Should the time be inconvenient, a recording will be made available for download, and candidate questions may be posted on this blog entry or sent to [email protected]. Topic: Meet the EC Candidates Date: Thursday, October 18, 2012 Time: 9:30 am, Pacific Daylight Time (San Francisco, GMT-07:00) Meeting Number: 807 818 225 Meeting Password: MeetEC ------------------------------------------------------- To join the online meeting (Now from mobile devices) ------------------------------------------------------- 1. Go to https://jcp.webex.com/jcp/j.php?ED=186721592&UID=0&PW=NMmUzNjY5ZTMw&RT=MiM0 2. If requested, enter your name and email address. 3. If a password is required, enter the meeting password: MeetEC 4. Click "Join". To view in other time zones or languages, please click the link: https://jcp.webex.com/jcp/j.php?ED=186721592&UID=0&PW=NMmUzNjY5ZTMw&ORT=MiM0 ------------------------------------------------------- To join the audio conference only -------------------------------------------------------     +1 (866) 682-4770     Outside the US: global access numbers  https://www.intercallonline.com/portlets/scheduling/viewNumbers/listNumbersByCode.do?confCode=6279803 or +1 (408) 774-4073     Conference code: 9454597     Security code: JCPEC (52732)------------------------------------------------------- For assistance ------------------------------------------------------- 1. Go to https://jcp.webex.com/jcp/mc 2. On the left navigation bar, click "Support".

  Read the article

• How to Export a Contact to and Import a Contact from a vCard (.vcf) File in Outlook 2013

  - by Lori Kaufman

  vCard is the abbreviation for Virtual Business Card and is the standard format (.vcf files) for electronic business cards. vCards allow you to create and share contact information over the internet, such as in email messages and instant messaging. You can also use vCards to move contact information from one email or personal information management program to another, as long as both programs support the .vcf file format. vCards can contain name and address information, as well as phone numbers, email addresses, URLs, images, and audio clips. We will show you how to export a contact to and import a contact from a vCard, or .vcf file, in Outlook. First access the People section by clicking People at the bottom of the Outlook window. To view your contact in business card format, click Business Card in the Current View section of the Home tab. Select a contact by clicking on the name bar at the top of the business card. To export the selected contact as a vCard, click the File tab. On the Account Information screen, click Save As in the list of options on the left. The Save As dialog box displays. By default, the name of the contact is used to name the .vcf file in the File name edit box. Change the name, if desired, select a location for the file, and click Save. The contact is saved as a .vcf file. To import a vCard, or .vcf file, into Outlook, simply double-click on the .vcf file. By default, .vcf files are automatically associated with Outlook, so the file is opened in Outlook as a Contact. Make any changes or additions to the contact in the contact editing window. To save the contact, click Save & Close in the Actions section of the Contact tab. NOTE: Notice that because this contact is new, the full contact editing window displays rather than the Contact Card that displays when double-clicking on a contact. You can open the full contact editing window instead of the Contact Card when editing a contact or searching for a contact. The contact is added to the Contacts folder. You can add your contact information to a signature in business card format, and it will display as shown above in emails. We have covered how to create signatures and will be discussing more about signatures and business cards in Outlook.     

  Read the article

• How do I prevent Ubuntu gradually slowing down to a stop?

  - by user29165

  I really do not know what is causing the problem of my desktop environment (D.E.) gradually slowing down. It seems to happen in Gnome 3.2, LXDE, XFCE, and KDE. I am running Ubuntu 11.10 and this problem started happening from a fresh install. I have noticed that if I restart Gnome or otherwise re-log-in with any of the D.E.s the speed resets to normal. I don't seem to have and memory leaks that account for it and there are not any processes that are using excessive CPU cycles. Due to the symptoms I am guessing that there is an underlying package that interacts with all D.E.s that is the source of the problem. Just to clarify, in extreme situations, if I let the slowdown continue without a restart of the D.E. my system will finally get to a point where everything, even my clock, freezes. The time over which Gnome slows down (noticeably after 17 hrs) is much less than LXDE, or XFCE but eventually they freeze as well. I didn't mention Unity since I haven't used it enough to verify the problem, but I don't see why it should be different. Just in case this is relevant, I Suspend my computer rather than turn it off. I do this because of the greatly reduced load time and the 17 hrs I stated above is actual up-time, not time where the D.E. is actually active. However, the slow down does not seem to be affected by how long the computer has been in suspend mode. I know that it is possible that this problem is due to an interaction between two or more of the applications that I use and as such it may not be able to be duplicated by others. In the end I am just wondering (a) are other people experiencing this issue and (b) does anyone have some advice on where to start looking for a solution if one is not already known. I am even open to the idea of switching to the beta release of 12.04 if anyone thinks it will solve the problem. Edit: I took a video of my latest freeze that you can watch at http://youtu.be/flKUqUzCmdE, sorry about the audio. Edit: Since that video I checked my memory for errors and tried installing the proprietary video drivers. No memory errors were found and the proprietary video drivers made the display unusable so I had to uninstall them. Any thoughts?

  Read the article

• Primary IDE Channel: Ultra DMA Mode 5 >> PIO Mode

  - by Wesley

  Hi, my netbook was having huge audio lag and just abnormally slow processing. After doing some searching on the internet, I found out that I needed to uninstall/reinstall the Primary IDE Channel found under the IDE controller section in the Device Manager. I would then set the Transfer Mode to DMA if available and everything would be great. For a period of time, I would see that "Ultra DMA Mode 5" was the current transfer mode, but every so often, it'd revert back to "PIO Mode", which is when it's really laggy. What can I do to prevent the Primary IDE Channel to revert from Ultra DMA Mode to PIO Mode? Also, my netbook has BSODed a few times when it is in PIO Mode, without any real explanation. I have a Samsung N120. Specs are as follows: http://www.samsung.com/ca/consumer/office/mobile-computing/netbook/NP-N120-KA01CA/index.idx?pagetype=prd_detail&tab=spec&fullspec=F. Only difference is that I have upgraded to 2.0 GB of DDR2 RAM. EDIT: For all who are looking for an answer to this problem, click the link in Kythos's answer and look at number 6 (Re-enable DMA using the Registry Editor). This always works for me now. If on reboot, you seem to only have a black screen after XP is loading, just wait... it is still loading and will show signs of life after 2-3 minutes.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

  - by Brian

  How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

  Read the article

• Play music on iPhone through computer

  - by Kyle Cronin

  Now that I've had my iPhone for a few months, I'm trying an experiment to see if I can't replace the laptop I carry around with my iPhone + internet connected computer. To this end, I've been trying to find a program that will let me play the music on my iPhone through the hardware and software on the host computer. If I recall correctly this was possible a few years ago with the iPod - Linux software like Rhythmbox and Banshee was able to read the music off an iPod and play it through the speakers. I even thought I recalled iTunes itself being capable of this at one time. Now, however, iTunes greys out/disables the music on my iPhone and I can't find any documented support for the iPhone in any other music program. Is this really no longer possible? Am I limited to using the headphone jack to get music to play? (note: I am using an iPhone 3G with the 3.0 software. I am attempting to play music on computers other than the one I sync with) Several replies mention that I should check "manually manage" to do this. I just tried this on a computer that I don't sync my iPhone to and it asked me to erase and sync, which is obviously something I don't want to do. update: OK, I checked the "Manually manage music and videos" box on a computer that I didn't sync to (now known as "Computer A"), and it told me that I needed to erase & sync to cause the changes to have effect, so I did. At this point I'm guessing that my iPhone thinks that it's syncing with that computer. I copied over a few songs using the autofill feature. At this point, Computer A sees the maybe 10 or so songs I've copied using autofill. I then plug my iPhone into my Macbook ("Computer B") which I've been syncing with. At this point, I'm pretty sure that it still thought that all my synced content was still on my iPhone. The "manually manage music and videos" checkbox isn't checked, so I check it and go through a similar process where iTunes erases the synced content and I copy over a playlist. At this point, there's no trace of the songs that I copied over from Computer A. So I plug my iPhone into Computer A - in the Music section are the handful of songs that I had copied over earlier, greyed out and unplayable. To make sure that this wasn't some sort of caching issue, I plugged my iPhone into my sister's Macbook ("Computer C") and it lists the same few, greyed out songs that I had copied over from Computer A. Plugging into Computer B doesn't reveal these songs at all, only the songs that it copied over (these are playable). A few things: This inconsistent behavior is driving me insane. Why would my iPhone report two versions of its contents to different computers? Is there a way to get a computer to completely forget about an iPhone and just resync everything to get everything into a consistent state? Even if I get the phone into a consistent state, I still can't play the files on my phone anywhere but the computer I sync with, which was my original goal. What am I doing wrong? maybe I should read the fine print before I mess with my iPhone So going over this thread with a fine-toothed comb again yields this lovely tidbit in the Apple docs: Note: Even when manually managing, some content may only be available from one library at time. This includes all content on iPhone and video content on iPods. OK, so manually managing is a dead end on the iPhone. Are there any other options? Any unofficial third-party programs or drivers that will work?

  Read the article

• How to get the permissions right for /dev/raw1394

  - by Mark0978

  I recently upgraded one of my ubuntu machines to Karmic and I'm having trouble getting the permissions of /dev/raw1394 set to 0666. They only thing this machine is used for is recording audio from a firepod which uses /dev/raw1394 via jackd and there are no other FireWire devices connected, so security around this device is not really an issue. If I run as root, everything works as expected, but I have some folks that run the recorder that I don't want to have root access. However, I can't figure out which lines setup the perms I've tied this: /etc/udev/permissions.d/raw1394.rules:raw1394:root:root:0666 And I have this setup (default install) /lib/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})" /lib/udev/rules.d/75-cd-aliases-generator.rules:# the "path" of usb/ieee1394 devices changes frequently, use "id" /lib/udev/rules.d/75-cd-aliases-generator.rules:ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \ /lib/udev/rules.d/60-persistent-storage-tape.rules:KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" /lib/udev/rules.d/50-udev-default.rules:# FireWire (deprecated dv1394 and video1394 drivers) /lib/udev/rules.d/50-udev-default.rules:KERNEL=="dv1394-[0-9]*", NAME="dv1394/%n", GROUP="video" /lib/udev/rules.d/50-udev-default.rules:KERNEL=="video1394-[0-9]*", NAME="video1394/%n", GROUP="video" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" And I find these lines in /var/log/syslog Apr 30 09:11:30 record kernel: [ 3.284010] ieee1394: Node added: ID:BUS[0-00:1023] GUID[000a9200c7062266] Apr 30 09:11:30 record kernel: [ 3.284195] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a97b9f] Apr 30 09:11:30 record kernel: [ 18.372791] ieee1394: raw1394: /dev/raw1394 device initialized What I can't figure out, is which line actually creates that raw1394 device in the first place. How do you get /dev/raw1394 to have permissions 0666?

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• Inexpensive, simple screen recording application for mac

  - by donut

  I am more and more consistently running into the need to create screencasts (record my screen) for clients to show them how to use programs or websites. Up until now I've been using Jing and it's been wonderful. But I would like something that can give me something less annoying than a .swf. A .mov or, best of all, something that plays without fuss on Mac and Windows. Also, the 5-minute limit is annoying, but not show stopping. Basically, I'd like to be able to actually give them the file on a CD or something instead of relying on whatever host I use staying up for eternity. To sum up, here's what I require: Record a portion or all of the screen. Records audio from mic while recording screen. Exports files easily playable on Mac and Windows (requiring Quicktime is okay, but not ideal) Will work on Mac OS 10.5+ Allows recording videos of at least 5 minutes. Text in recorded videos is easily readable when exported. Bonuses points for: Records videos greater than 5 minutes Exported videos will work in Windows Media player without any fuss. I haven't upgraded to Snow Leopard yet but I know it has some screen recording stuff built in but I don't know if it would be sufficient or not. The reason I say, "simple" is because most of the applications I've seen do much more than I need (I mean, Jing is nearly perfect for my needs) and cost more than I would like to spend.

  Read the article

• How to write files in specific order?

  - by Bernie

  Okay, here's a weird problem -- My wife just bought a 2014 Nissan Altima. So, I took her iTunes library and converted the .m4a files to .mp3, since the car audio system only supports .mp3 and .wma. So far so good. Then I copied the files to a DOS FAT-32 formatted USB thumb drive, and connected the drive to the car's USB port, only to find all of the tracks were out of sequence. All tracks begin with a two digit numeric prefix, i.e., 01, 02, 03, etc. So you would think they would be in order. So I called Nissan Connect support and the rep told me that there is a known problem with reading files in the correct order. He said the files are read in the same order they are written. So, I manually copied a few albums with the tracks in a predetermined order, and sure enough he was correct. So I copied about 6 albums for testing, then changed to the top level directory and did a "find . music.txt". Then I passed this file to rsync like this: rsync -av --files-from=music.txt . ../Marys\ Music\ Sequenced/ The files looked like they were copied in order, but when I listed the files in order of modified time, they were in the same sequence as the original files: ../Marys Music Sequenced/Air Supply/Air Supply Greatest Hits ls -1rt 01 Lost In Love.mp3 04 Every Woman In The World.mp3 03 Chances.mp3 02 All Out Of Love.mp3 06 Here I Am (Just When I Thought I Was Over You).mp3 05 The One That You Love.mp3 08 I Want To Give It All.mp3 07 Sweet Dreams.mp3 11 Young Love.mp3 So the question is, how can I copy files listed in a file named music.txt, and copy them to a destination, and ensure the modification times are in the same sequence as the files are listed?

  Read the article

• HLS video segmenting complications. How to create a transport stream with ffmpeg

  - by Agzam

  I have h264 videos, and currently we're using Apple's HTTP Video Streaming tools and mediafilesegmenter to segment these files. What I need to do is to switch to alternative segmenter based on this very popular open-sourced segmenter The problem is that this segmenter does not just take any video, but takes only MPEG-TS videos. So I have to convert my h264 videos to TS first. I can do that with ffmpeg. I'm using this: ffmpeg -i encoded.mp4 -vcodec h264 -i encoded.mp4 -sameq -acodec aac -strict experimental -f mpegts output.ts But this creates fairly larger output. And the reason is that Apple's segmenter keeps the same codec - AVC and the same audio codec - AAC, whereas ffmpeg changes video format to MPEG Video. The question is: can I somehow keep the same AVC video codec and still convert video to a transport stream? So my goal is to keep the same video quality and same video codecs as Apple's medifilesegmenter does. UPD: Okay... it seems that ffmpeg CAN split videos into segments: ffmpeg -i encoded.mp4 -c copy -map 0 -vbsf h264_mp4toannexb -f segment -segment_time 10 -segment_list test.m3u8 -segment_format mpegts segment%d.ts That's still has one problem: it doesn't create http live streaming index file. (-segment_list creates a file with list of segments, but it doesn't look like HLS index). So, you still have to create index file

  Read the article

• Installing SATA dvd burner on machine with no spare SATA ports/connectors

  - by Faheem Mitha

  Greetings. I have the following motherboard Tyan Thunder K8WE S2895A2NRF Motherboard - extended ATX - nForce Pro 2200/2050 - Socket 940 - UDMA133, Serial ATA-300 (RAID) - 2 x Gigabit Ethernet - FireWire - 6-1 channel audio This is part of a computer that was assembled in the winter of 2006/2007. The user manual says the following with regard to SATA Integrated SATAII Generation 1 Controllers (from NForce Professional 2200) Two integrated dual port SATA II controllers Four SATA connectors support up to four drives 3 Gb/s per direction per channel NvRAID v2.0 support Supports RAID 0, 1, 0+1 and JBOD. I just purchased a SATA DVD burner. Here is the page for the product http://www.amazon.ca/gp/product/B002QGDWLK/ The problem I am facing is that I already have 4 SATA drives installed. I don't want to remove any of them. However, I want the DVD burner above installed as well. The person I am consulting with here (Bombay, India) tells me that my four available SATA ports are filled, and that my only option is to install a SATA card into the one free PCI slot on the motherboard. However, he says that with this setup I will not be able to boot from the DVD drive. Are these statements correct, and what are my other options if any? Even it the statements in the last para are true, I suppose I could use one of the motherboard connectors/ports there are currently being used with the hard drives with the DVD drive, and use the "add-on" connector with one of the hard drives. Not all the 4 hard drives need to be bootable. BTW, despite having read through http://en.wikipedia.org/wiki/Serial_ATA#Cables.2C_connectors.2C_and_ports I am fuzzy on the differences between connectors, cables and ports. Thanks in advance.

  Read the article

• script to run sox to combine multiple mono tracks to stereo

  - by Ze'ev

  I have a folder full of .wav audio files. Some are stereo, most are mono splits. The mono split pairs are all named foo bar track.L.wav and foo bar track.R.wav I can use the command line tool sox to combine a mono pair into 1 stereo track like this: sox -M track1.L.wav track1.R.wav track1.Stereo.wav where the first 2 files are the mono pairs, and the third is the output stereo file. This is great, but I'd like to have a script that will automatically find all the mono pairs and combine them into stereo files. I.e., I need it to find all files which have the same name except for the .L. and .R. before the extension, and run sox on them, outputting to a new file with the same name without the L/R suffix. For example, if my folder contains these files: track1.L.wav track2.L.wav track3.L.wav track4.L.wav track1.R.wav track2.R.wav track3.R.wav track4.R.wav track6.wav track7.wav I need to run these commands: sox -M track1.L.wav track1.R.wav track1.Stereo.wav sox -M track2.L.wav track2.R.wav track2.Stereo.wav sox -M track3.L.wav track3.R.wav track3.Stereo.wav sox -M track4.L.wav track4.R.wav track4.Stereo.wav Here's where I am so far: for file in ./*.L.wav; do file2=`echo $file | sed 's_\(.*\).L.wav_\1.R.wav_'`; out=`echo $file | sed 's_\(.*\).L.wav_\1.STEREO.wav_'`; echo $file - $file2 - $out; done That works, but when I replace the echo line with sox -M $file $file2 $out; it doesn't work; spaces in the filenames cause it to fail.

  Read the article

• Songbird looping my library playlist

  - by Logi

  I'm using Songbird (on Windows) as my iTunes replacement. There's two things that annoy me about Songbird: 1) It has a web browser built in. I can ignore this as I don't use it. But, seriously, a web browser? :/ 2) It loops my library. This, I don't like. The way I play my audio is by launching Windows Explorer, navigating to my media library and double clicking on a single MP3. I only want to hear that one MP3. I don't use the Media Import function in Songbird - Or any other media player. But it insists on adding every song I play to the Library. Disabling this would be excellent but, falling short of that, I'd at least like to stop it repeating every song in the library. When Songbird finishes playing the last song in the Library (which is the song I just opened via Windows Explorer (gets appended to the library)), it jumps to the top of the library and starts playing all the songs again. How can I stop this? Songbird is set to 'Repeat none'

  Read the article

• Networking Home Office

  - by Matt

  I'm in the process of building an office in my garden. It's about 25m away from my house. I'd like to run a wired network connection to the office. I'd rather not go down the powerline route, as speeds don't seem great, and I'm likely to want to be moving a lot of data around on the internal network. I have an electrician who is running armoured electrical cable to the office, and is providing conduit for me to run network cable. My questions are: 1) What type of cable to run 2) How I terminate/connect it at both ends I could get something like armoured cat6 utp solid core (like this: http://www.netstoredirect.com/cat6-cable/289166-external-armoured-cat6-utp-solid-cable-price-per-metre.html) which seems fairly robust, but then I have to terminate it. Additionally, where the cable enters my house, there is about another 15m to where my router is situated. I also read this artice: http://www.audioholics.com/audio-video-cables/bjc-cat-network-cable-quality-interview which scared me into realising I don't know what I'm doing!! particularly with termination. Or I could get an "cat6 external patch cable" (e.g http://www.netstoredirect.com/rj45-network-cables/239231-external-cat6-utp-ldpe-rj45-patch-leads.html) and run that in the conduit, and work out how to terminate it at the house end. At the office end I guess I can just plug it into a switch. Any help? Thanks

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• New SSD freezing on older motherboard (intel G31)

  - by DJM

  I have an ECS G31T-M motherboard running a Core2 Quad processor, 4gb RAM, Windows 7 32bit, Geforce 9600GT. Bought a Sandisk Extreme III 120GB (SDSSDX-120G-G25) and installed today. I'm outputting this from my 9600GT with included TV-out adapter to Component video (to my HDTV). This motherboard is SATA 2 and from what I can tell, SSDs run on the IDE controller and there is nothing fancy to set up advanced features of SSDs. I've noticed on other forums (but not verifying with ECS) this board does not support AHCI. I have two versions of Windows 7 installed on two drives, the SSD and an old 500G disc drive. When booted from my older 500G HDD, video plays fine on the HDTV. When booting the SSD windows 7 install, I am freezing constantly, as in, video plays OK for a minute, then picture freezes for 1-3 minutes (sometimes as audio continues playing) and returns for 20-30 seconds before doing the same thing again. Other tasks such as basic maneuvering through file folders seems to be no problem. Please help!! Do I need a new system for this thing to work, or could there be other fixes? I updated firmware to R201 to no avail. DJM

  Read the article

• Tablet as Car Computer

  - by luxurychair

  Okay, so forward this off to the right place if this isn't the right place to ask this question. I want to use a tablet computer as a car-computer. Minimum features would be to run my music (through iPod, Pandora, whatever I want) and GPS Navigation, watch TV or movies while I'm parked waiting for people, and the hard one: it needs to answer my phone calls with a pleasant interface much like in-dash systems do. It needs to detect that my phone is ringing in my pocket and provide an on-screen answer/ignore and then route the audio through the cars speakers. It would be nice to dial out and have address book access, but that is somewhat secondary. I have an iPhone myself and I figured that an iPad with 3G might make a good system for this - but I'm open to other options if an iPad can't do everything I need. I'm willing to write code, and I'm willing to jailbreak one or both devices. I haven't done much work in Obj-C, but I'm not opposed to learning a new language for this project. It's self enrichment for the most part, as I'm sure I can buy an indash entertainment system for less. Does anyone have experience with the iPhone/iPad SDK that can tell me whether or not it would be possible to get it an iPad to answer my calls in the car? What about an Android tablet? (that Adam looks promising, too).

  Read the article

• Unix Permissions issue with users belonging to the same group accessing a folder

  - by TK Kocheran

  I have a folder I'd really like to allow another user on this machine access to. I'm using mt-daapd to serve music to the network, so I'd like to enable the mt-daapd user to access my Music directory, /home/rfkrocktk/Music. The master user is rfkrocktk obviously. I've tried to set all of my permissions properly on the directory, but the mt-daapd user can't acces the files. I created a group called media-users and added both rfkrocktk and mt-daapd to it in order to give mt-daapd permission to simply read all of the files in that directory and subdirectories. If I run id on each of my users, here's what's displayed: $ id rfkrocktk > uid=1000(rfkrocktk) gid=1000(rfkrocktk) groups=1000(rfkrocktk),4(adm),20(dialout),24(cdrom),29(audio),46(plugdev),104(lpadmin),115(admin),120(sambashare),124(vboxusers),1001(jupiter),2002(media-users) $ id mt-daapd > uid=123(mt-daapd) gid=65534(nogroup) groups=65534(nogroup),2002(media-users) It definitely seems that both users are a part of the media-users group, so what could be going wrong? If I run ls -l on the actual Music directory to see its permissions, here's the output: drwxr-Sr-- 201 rfkrocktk media-users 12288 2011-01-13 12:26 Music If I run ls -l on the Music directory to get its children, here's the output: drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-12-20 15:31 2DBoy drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-05-25 12:50 ABBA drwxr-Sr-- 3 rfkrocktk media-users 4096 2009-12-28 15:19 Access Denied drwxr-Sr-- 10 rfkrocktk media-users 4096 2009-12-28 15:19 AC-DC drwxr-Sr-- 3 rfkrocktk media-users 4096 2009-12-28 15:19 Aerosmith drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-06-04 10:45 A Flock of Seagulls drwxr-Sr-- 4 rfkrocktk media-users 4096 2010-05-28 18:13 Alestorm drwxr-Sr-- 3 rfkrocktk media-users 4096 2010-06-22 23:29 Amon Amarth drwxr-Sr-- 5 rfkrocktk media-users 4096 2009-12-28 15:19 Anberlin ... From this, it would seem that I should be able to access the folders from mt-daapd, but I can't. Running sudo -i -u mt-daapd ls -l /home/rfkrocktk/Music displays nothing, indicating to me that for whatever reason, mt-daapd doesn't have access to read the folder. What am I doing wrong?

  Read the article

• What service do you use for music on hold?

  - by Russ Warren

  This may not be a sysadmin question for some, but it is definitely a hurdle I have to jump as the sysadmin for my company. We recently rolled-out a company wide VoiP system (Switchvox, to be exact) that has come preloaded with some royalty-free music on hold. Our customers have been complaining that the music on hold sounds like "funeral music." This may be the case (although I wouldn't want it played at my funeral), but it is all we have and we aren't willing to be sued over using music that isn't properly licensed. So, that brings me to the question asked in the title -- what and/or how do you provide decent music on hold? I'm assuming many people here use a PBX that allows customized music, so this has to apply to many of you. We've been looking at some sites that allow you to download royalty-free music for a one-time fee, but the music seems...lame. Something like a one-year subscription from ibaudio.com seems to be the best bet so far. Have you been able to discover something a little more mainstream for a decent licensing fee? Thank you. EDIT: Our PBX allows the playback of MP3 and OGG files, but does not allow streaming of a live audio source, Internet-based or otherwise. It also does not allow the use of a "line-in" source such as a CD player or radio. Don't let this stop you from sharing your setup, though. I'm interested in hearing what everyone uses!

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >