Search Results

Search found 8472 results on 339 pages for 'boot'.

Page 185/339 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• ubuntu mass deployment kickstart file how/where?

  - by gkrawiec

  i've succesfully been able to prepare an OEM image that is ready to be cloned and installed in about 1100 machines. My only issue right now is that when the machine boots for the first time it asks for the basic setup questions. I think I have the kickstart file ready, but I dont know how to call it. My logic says that before I run the "prepare to ship to end user" script that I have to modify the boot parameters to call the ks file so the ks.cfg file goes with each drive. My issue is I cant figure out how to modify the boot parameters. Also, i dont know if there is a log i can check to see if its actually calling it or not. I am using ubuntu 12.04 desktop x64. I am trying on /etc/default/grub by modifying one line from GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash ks=file:/ks.cfg" then I run an update-grub but its not working. My ks.cfg file is: ----------------------- #Generated by Kickstart Configurator #System language lang en_US #System keyboard keyboard us #System timezone timezone America/Tijuana Initial user user mytestuser --fullname "Test User" --iscrypted --password $sdfsfsdgthrttyujtkyktru #Rebootafter installation reboot ------------------------- what am I doing wrong? thanks, -gk

  Read the article

• Cannot Restore GRUB (Ubuntu 11.04 + Win 7)

  - by Benny

  I'm trying to fix GRUB on my PC, but I'm running into serious issues doing so. Any help would be greatly appreciated as I'm completely crippled right now. Here is the sequence of events for this PC: Installed Windows 7 Split full disk into two partitions (one for win7 and one for multimedia) Long time passed Split one of the partitions into two again Installed Ubuntu 11.04 on new partition A little time passed Windows 7 acting up, reinstall Ubuntu GRUB gone Tried restoring GRUB by mounting and grub-install from live USB Tried switching to a live CD instead of USB (thinking it might be the drive) Now I don't see GRUB and I'm getting "input/output" errors An example i/o error: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe86aff6 Device Boot Start End Blocks Id System /dev/sda1 * 1 48727 391393280 7 HPFS/NTFS /dev/sda2 48727 77063 227612647+ 7 HPFS/NTFS /dev/sda3 77063 91202 113566721 5 Extended /dev/sda5 77063 90622 108908544 83 Linux /dev/sda6 90622 91202 4657152 82 Linux swap / Solaris ubuntu@ubuntu:~$ sudo mount /dev/sda5 /mnt ubuntu@ubuntu:~$ sudo grub-install --root-directory=/mnt /dev/sda mkdir: cannot create directory `/mnt/boot': Input/output error ubuntu@ubuntu:~$ cd /mnt ubuntu@ubuntu:/mnt$ ls ls: cannot access etc: Input/output error

  Read the article

• Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

  - by David Skare

  Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

  Read the article

• Chainloading GRUB2 from BURG

  - by WindowsEscapist

  I have an old PC with Puppy Linux in addition to Ubuntu and Windows XP. THis creates a LOT of menu entries (all of which I would like to keep): Ubuntu 10.04 Ubuntu Recovery Mode Memtest x86 Memtest Serial Windows XP Pro Precise Puppy Linux Precise Puppy TORAM Puppy 4.3.1 Puppy 4.3.1 TORAM Plop Boot Manager (for booting to USB, PC doesn't have BIOS option). Now, in my fancy shiny laptop I've gotten really attached to BURG, and would like a setup where I have a Windows icon, an Ubuntu icon, and an arrow that chainloads GRUB2 so that I can boot from USB or run Puppy if need be (all these entries will obviously not fit into the BURG theme I use, Lightness). The problem is, GRUB2 can't install the the beginning of a partition like it used to be able to (I am reluctant to specify andything with --force at the end), at least, without warning that warn: This is a BAD idea!. So I'm kind of at a loss here. I can't see how the folding option would work, because all of those other options would have the same icon once I unfolded (Lightness is non-text-based). If I do embed GRUB using grub-install /dev/sdax --force, how do I chainload it with BURG? Is there another way?

  Read the article

• What is the safest way to remove a swap partition?

  - by user212062

  I am running Ubuntu 12.04 on a 64-bit HP laptop with a 16 GB flash drive. I do not have a working hard drive right now. When I installed Ubuntu, I created a 2 GB swap partition on sdb1. I have since learned that swap partitions are generally a bad idea on flash drives, so I would like to use my swap space for my other partitions. You can see my partition scheme in the link below. I have read that I just have to comment sdb1 out of the fstab file, boot from a GParted live CD, select swapoff for sdb1, delete/merge with other partition, and everything's good. But, I've also read that messing with sdb1 can change the UUID of sdb2 or sdb3 and cause problems. Is this true? Does initramfs use swap at all? Also, when I get Ubuntu running on my laptop with an internal hard drive, does the swap partition help that much? I have 6 GB of DDR3. Does the rule of 1.5xActual RAM still apply? It seems like quite a bit to me. Thanks for the help! UPDATE: I have removed swap. The process I followed is: Right click swap partition in GParted and selected swapoff. Used # to comment the swap partition out of fstab. I tried to boot from a live GParted CD, but I kept getting an error, so I ran GParted in Ubuntu. Deleted swap partition in GParted. Unmounted /windows. Expanded /windows to take the remaining space. Mounted /windows. The / and /windows partitions each kept their own names and UUIDs, and everything is running fine. I have never seen any swap space being used before, and I don't intend to use the hibernate function, so I think removing swap was a good idea.

  Read the article

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• How do I choose which way to enable/disable, start/stop, or check the status of a service?

  - by Glyph

  If I want to start a system installed service, I can do: # /etc/init.d/some-svc start # initctl start some-svc # service some-svc start # start some-svc If I want to disable a service from running at boot, I can do: # rm /etc/rc2.d/S99some-svc # update-rc.d some-svc disable # mv /etc/init/some-svc.conf /etc/init/some-svc.conf.disabled Then there are similarly various things I can do to enable services for starting at boot, and so on. I'm aware of the fact that upstart is a (relatively) new thing, and I know about how SysV init used to work, and I'm vaguely aware of a bunch of D-Bus nonsense, but what I don't know is how one is actually intended to interface with this stuff. For example, I don't know how to easily determine whether a service is an Upstart job or a legacy SysV thing, without actually reading through the source of its shell scripts extensively. So: if I want to start or stop a service, either at the moment or persistently, which of these tools should I use, and why? If the answer depends on some attribute (like "this service supports upstart") then how do I quickly and easily learn about that attribute of an installed package? Relatedly, are there any user interface tools which can safely and correctly interact with the modern service infrastructure (upstart, and/or whatever its sysv compatibility is)? For example, could I reliably use sysv-rc-conf to determine which services should start?

  Read the article

• How to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  - by mehdi

  I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  Read the article

• Hide icons encrypted file system partitions in Nautilus

  - by Eddy Pronk

  I've installed Ubuntu 10.04 from the alternate CD. It has an encrypted root and swap partition. The root partition is visible in Nautilus as 'File Syste' icon. There is another icon "216 GB Filesystem". If I click it says: Unable to mount 216 GB Filesystem. /dev/mapper/sda5_crypt is mounted. Then there is another icon "6.1 GB Swap Space". If I click it it says: Unable to mount 6.1 GB Swap Space. Not a mountable file system. How can I hide these last two icons? Partition layout: $ sudo fdisk -l /dev/sda [sudo] password for eddyp: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa6e92df4 Device Boot Start End Blocks Id System /dev/sda1 1 11749 94373811 7 HPFS/NTFS /dev/sda2 11871 38914 217219073 5 Extended /dev/sda3 * 11750 11871 976896 83 Linux /dev/sda5 11871 38167 211220480 83 Linux /dev/sda6 38167 38914 5997568 83 Linux Partition table entries are not in disk order Mounted as: $ mount /dev/mapper/sda5_crypt on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda3 on /boot type ext4 (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/eddyp/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=eddyp) /dev/sda1 on /media/S3A6595D003 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

  Read the article

• Installing Ubuntu 12.04 on a single GPT SSD which contains Windows 7

  - by Gary

  I recently bought a brand new 64 bit PC with a (ASUS) motherboard that supports UEFI and a GPT formatted 240Gb SSD, which contains Windows 7 in the first of 3 (80Gb) partitions. When the system arrived, it booted into Windows 7 like a dream, with no problems. I did not originally want Windows, but the manufacturer does not work with Linux (of any flavour), so I thought I would install Ubuntu into the second partition and dual boot. I downloaded the 12.04 64bit version and proceeded to install. Having selected to 'install', the screen became corrupted, with multicoloured garbage across the middle third of the screen !! So, I rebooted and --- MISSING OPERATING SYSTEM !!! The only way I can now get into Windows is via Super Grub2. First question - what went wrong ? 2nd - Will Ubuntu install on a GPT disk partition ? 3rd - Will it install alongside Windows 7 without screwing the boot mechanism ? 4th - How do I do it ? I have scoured the internet looking for appropriate answers and found NONE ! Please help.......

  Read the article

• NEW! Oracle Unified Business Process Management Specialization!

  - by michaela.seika(at)oracle.com

  Be one of the very first to become an Oracle Unified Business Process Management Specialist! Check out the Oracle Unified Business Process Management Knowledge Zone and go to the Specialization criteria to learn how you can become an BPM Specialized Partner. Pass the following assessment tests and exam to meet the competency criteria: · Oracle Unified Business Process Management Suite 11g Sales Specialist · Oracle Unified Business Process Management Suite 11g PreSales Specialist Assessment · Oracle Unified Business Process Management Suite 11g Essentials (1Z1-560) Exam Go to the OPN Competency Center to access the Specialist Guided Leaning Paths and Boot Camp to get the product information that can help you pass the tests: · Oracle Unified Business Process Management 11g Sales Specialist GLP · Oracle Unified Business Process Management 11g PreSales Specialist GLP · Oracle Unified Business Process Management 11g Implementation Specialist GLP · Oracle Unified Business Process Management Suite 11g Implementation Boot Camp Oracle Unified Business Process Management Suite 11g Essentials (1Z1-560) Exam is available in beta testing. Pass the exam to become an Oracle Unified Business Process Management Certified Implementation Specialist! As an incentive we are offering FREE beta exam vouchers to early-adopter Partners. As there are a limited number of free vouchers available, the requests will be processed on a first-come, first-served basis. To request a voucher send an e-mail to: [email protected] specifying the exam name, and your contact information: name, job role, and company name. Register for the OU beta exam at the nearest Pearson VUE testing center. For More Information Oracle Certification Program Beta Exams OPN Certified Specialist exams OPN Certified Specialist FAQ

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• Burg Custom Icons work only with specific themes

  - by el10780

  I have made a custom icon for burg loader for my Lenovo Recovery Partition.I have made 3 icons : large_qdrive.png (128 X 128 pixels) small_qdrive.png (24 X 24 pixels) grey_qdrive.png (128 x 128 pixels) The .png icons that I created I made them using gimp from a qdrive.ico file that I found in the Lenovo Recovery Partition. I transferred the icons to the /boot/burg/themes/icons folder and I added to the class list of the grey,large,small and the hover files the following lines : -qdrive { image = "$$/large_qdrive.png" } in the large file -qdrive { image = "$$/small_qdrive.png" } in the small file -qdrive { image = "$$/grey_qdrive.png" } in the grey file -qdrive { image = "$$/grey_qdrive.png:$$/large_qdrive.png" } in the hover file I ran sudo update-burg and after that I modified the following line in the burg.cfg file : menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { to menuentry "Windows 7 (loader) (on /dev/sda2)" --class qdrive --class os { and I also tried to change the title for the Lenovo Recovery Partition,so I tried this as well: menuentry "Lenovo Recovery Partition (on /dev/sda2)" --class qdrive --class os { None of this tries enforced actually burg loader to use the custom icon that I made and I can't figure out why. I have to mention also that there are a few themes that I have installed in burg which actually are able to use the small_qdrive.png icon that I made,but all the others which use either the large_qdrive.png or the grey_qdrive.png weren't able to use the custom icons. I have double checked for typos in all the files that I have created or I modified,so I am pretty sure that I haven't misspelled anything. I have checked also the title of the custom icons that I made and neither of them have a typo. I have looked also if there are any other folder that the themes might use to retrieve the icons,but it seems that all of them except for **Fortune** theme,which I downloaded from OMG!UBUNTU,use the icons folder which is located in /boot/burg/themes/icons I tried to add the custom icons to the icons folder of the theme **Fortune**,but still nothing happened.

  Read the article

• Deleting Unused Swaps Partions

  - by Nikita Kononov

  Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Really slow wireless internet on 12.04 with HP dv6 6070ca

  - by Joe

  I was recently running the previous version of Ubuntu through Wine, and everything was working great. I decided to upgrade to pangolin when I saw it came out. After upgrading the internet was very slow (the estimated time on the updates was something like 4 days). I thought maybe this had something to do with the Wine installation, so I decided to finally do an actual dual boot. I partitioned my drive all nice and neat, but I made the mistake of connecting to the internet for the installation, and clicking the option to install updates and restricted extras. This was in the morning, circa 6 am. Fast forward to the evening, the installation is frozen at around 75%. In frustration I gave the ol girl a hard shut-down, which effectively rendered my machine useless. I used the thumb drive to reinstall Ubuntu, this time without connecting to the internet. Installed nice and easy, no problems, but the internet is still ridiculously slow. It took me about 20 minutes of frustration and hitting stop and reload repeatedly to even get this question page to open. This is important to me as now Windows won't even boot and I have to use ubuntu for the time being but I can't even bear to turn on my laptop due to the frustration that immediately ensues. Please help! Oh, and I'm relatively new so if there are some terminal commands that spew out info you guys would find useful let me know what they are and I'll post back the information.

  Read the article

• Data recovery on Ubuntu 11.10?! (after crashing with Seagate 320GB)

  - by Sam

  Just installed 11.10 last week and decided to transfer iTunes music (from Windows dual boot) to my Seagate 320GB. I left it in, restarted, clicked Ubuntu at the boot screen, and then it froze after a few lines of code! I think I got to 3.7086 or something before I pressed CTRL+ALT+DEL and the system restarted after another few lines of code. I am completely new to Ubuntu so after Googling, I made a live CD with 10.04, the most stable release I've heard, and I'm typing this from there now. However, when I go to mount my partition, only the Windows Vista partition (308GB) is there! It has all my Windows files but my Ubuntu 11.10 ones are nowhere to be found. I need to restore these pictures I transferred from my camera using Shotwell the other day... any help is appreciated! p.s. 11.10 has never crashed on me in my trial week, so I'm guessing it's the Seagate hard drive's fault. However, now I'm running it on 10.04 and it works fine.

  Read the article

• How do I force Wubi to install a 32-bit version?

  - by marx

  I'm using Windows 8 (32bit) customer preview and installing WUBI Ubuntu 12,04.1. I down loaded 32 bit installer from ubuntu dot com, The wubi installer says AMD 64 xt. I had a previous 12,04 install and in the terminal typed in uname -a, it say's 64 bit. I also opened detail from the system and it read 64 bit system. My question is: how to ensure that a windows/wubi/ubuntu/installer is 32 bit or 64 bit BEFORE making a commitment to install from the wrong wubi install? After posting this I did another wubi installation. Signed into ubuntu, opened system settings, open Details: OS Type 64 Bit. Why is it doing this? I have a 32 Bit machine: Toshiba Satellite A-215 S5818 (previous Windows Vista)<--wiped clean. from an earlier installation of Ubuntu 10.10 which worked, in feb 2012 i installed Win8 Customer Preview Release (32Bit) which took over the BOOT order and 140 GB Hard Disk. I am trying patiently to install WUBI 32 BIT Ubuntu 12.04 Install, it keeps returning 64 BIT install.. Why?? I should also mention that i was successful in a dual boot install ubuntu 10.04/win8 32 bit install and upgraded to 12.04 which is fine for now, but i want a win8/wubi/ubuntu12.04 32 bit working not 64 bit breaking what i have. thank you.

  Read the article

• OS choice for functional developing

  - by Carsten König

  I'm mainly a .NET developer so I normaly use Windows/VisualStudio (that means: I'm spoiled) but I'm enjoying Haskell and other (mostly functional) languagues in my spare time. Now for Haskell the windows-support is ok (you can get the Haskell-Platform) but latley I tried to get a basic Clojure/Scheme environment set up and it's just a pain on windows. So I'm thinking about trying out another OS for better tooling and languague support. Of course that leaves me with MacOS or some Linux distribution. I never used MacOS before and of course Linux would be cheaper (free) and I don't think I can parallel-boot MacOS on your normal PC-Hardware (can you?). PLUS: I don't have a clue about the tools you can use on those (to me) forign OSs. To make it short: I want to explore more Haskell, Clojure, Scala, Scheme and of course need at least good tooling for JavaScript/HTML5/Css. Support for .NET/Mono/F# would be great but for this I will still have my Win7 boot. So I like to know: - what is your prefered OS, Distribution (is Ubuntu viable?) - what Editor/IDE are you using Thank you for your help! PS: I'm not sure if this is the right place for this question but I surely hope so - if not please let me know where I should move this to (StackOverflow don't seem to be the right place IMHO)

  Read the article

• All files on automounted NTFS partition are marked as executable

  - by MHC

  I have set up an NTFS partition to automount via fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda7 during installation UUID=e63fa8a2-432f-4749-b9db-dab328807d04 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda4 during installation UUID=e9ad1bb4-7c1f-4ea9-a6a5-799dfad71c0a /boot ext4 defaults 0 2 # /home was on /dev/sda8 during installation UUID=eda8c755-5448-4de8-b58c-9cb75823c22d /home ext4 defaults 0 2 # swap was on /dev/sda9 during installation UUID=804ff3a7-e5dd-406a-b63c-e8f3c635fbc5 none swap sw 0 0 #Windows-Partition UUID=368CEBC57807FDCD /media/Share ntfs defaults,uid=1000,gid=1000,noexec 0 0 As you can see I have added the noexec bit to the configuration. Why? Because any file I create on or move to the partition is automatically marked as executable. The problem is that there is no way of changing that through nautilus. I cannot uncheck the "Allow executing file as program" option. The noexec option doesn't help, unfortunately. It only prevents nautilus from displaying the "run" or "read" dialog but doesn't change the executable flag. Is there any way I can fix this?

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• How to Pin Any File to the Start Screen in Windows 8

  - by Taylor Gibb

  By default Windows 8 only allows you to pin a few file types to the Start Screen. Read on to find out how you can change that by editing the registry. How to Pin Any File to the Start Screen in Windows 8 Press the Win + R keyboard combination to open a run box, then type notepad and press enter. When notepad opens, paste the following into the new document: Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\*\shell\pintostartscreen] “MUIVerb”=”@shell32.dll,-51201″ “NeverDefault”=”" “Description”=”@shell32.dll,-51202″ “MultiSelectModel”=”Single” [HKEY_CLASSES_ROOT\*\shell\pintostartscreen\command] “DelegateExecute”=”{470C0EBD-5D73-4d58-9CED-E91E22E23282}” Then click on the File menu item and select save as… Before you go any further, change the Save as type to All Files. Then give your file a name ending in .reg and click Save. PinToStartHack.reg To use the hack, just double click on the .reg file you just created. When you are prompted about whether you want to continue, click Yes. Now you can pin any file to the Start Screen. Undo the Change If you ever wish to undo the change, press the Win + R keyboard combination and type regedit, then press enter. Then drill down into: HKEY_CLASSES_ROOT\*\shell\ Finally delete the pintostartscreen key. That’s all there is to it. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• BusEnum2 and a Minor Bug Fix

  - by Kate Moss' Open Space

  The default root bus driver, BusEnum, enumerate and active drivers one by one in synchronized manner. It is not only slowing the boot time but in the even if any of driver's init function (XXX_init) get hanged, the whole system won't boot at all. There is a sample of enhanced root bus driver, BusEnum2, on the http://msdn.microsoft.com/en-us/library/dd187254.aspx The page provides the sample code and the detail explanation of the design concept. With multi-threaded BusEnum2 on CE7 with SMP enabled system, the scalability is even more significant. Since you have more than one processor and it can load drivers in parallel! Everything looks good so far, except to there is a small bug in the sample code. Fortunately, it is easy to fix. But hard to trace if you ever enc outer it! The BUSENUM2 flag only defined in BUSENUM2\BUSDEF\sources but not in BUSENUM2\BUSENUM\sources. The DeviceFolder is implemented in BUSENUM2\BUSDEF but the instance is created in BUSENUM2\BUSENUM\busenum.cpp, so the result is it allocates less memory than actual need.   Add   CDEFINES=$(CDEFINES) -DBUSENUM2   into BUSENUM2\BUSENUM\sources and the problem fixed!

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >