Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 185/1213 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Using USB to Ethernet with Linux Ubuntu 12.04

  - by Sriram

  Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

  Read the article

• Sharing internet to Ubuntu 12.04 VMWare guest

  - by John Cogan

  Got the 12.04 distro and installed this on my Mac VMWare Fusion (Version 4.1.2). Install went fine and Ubuntu seemed to update itself during the install. Rebooted and now I cannot get Ubuntu to access the internet via my Macs Ethernet connection (Connected to a router) Have tried settings the VMWare network adaptor to NAT or bridged and Host only without success. In Ubuntu I have the eth0 set to Automatic DHCP. VMWare tools is installed as well. I know next to nothing about what to do here and net searches on both Stackoverflow and Superuser sites are producing not results for me. Could someone please help? What to eventually have Ubuntu run in the background as a development web server running Zend Framework and CE Server edition but need thew internet access to run updates etc on Ubuntu. Any help would be really appreciated. TIA John

  Read the article

• Networking disabled

  - by Terry Dixon

  Both the Wifi and the ethernet connection to the internet are not working. All had been functioning fine until the Ubuntu suspended itself. On re-starting, the connection to internet failed to function and now I get the message "Network Disabled" whenever I re-boot. nm-tool tells me the state is "asleep". Stopping and starting the NetworkManager has no effect The machine is an Inspiron 9300 and work perfectly with Windows. How do I wake the networking up? Thanks

  Read the article

• Screen Corruption in half the screen only

  - by Guy DAmico

  About 50% of the my NATTY desktop screen is corrupted. Once that happens I can re-boot as many times as I want but the problem continues. If I logout and then into WINDOWS for a day I may be successful and boot UBUNTU with a good screen. The desktop is formatted correctly, there's no pixelation, rather there is a fine grained white crosshatch pattern covering the entire screen. If I open any application the screen corruption worsens eventually to the point I can no longer make out anything. I ran ram memory test w/o any errors. I have no display issues when running WINDOWS 7. Any ideas. My computer is a Dual Boot stock DELL 5150 w/3gig of ram an on board video.

  Read the article

• Ubuntu 12.10 Unity and Gnome not showing correctly after log in

  - by Luis Rodriguez

  Hello Ubuntu community. Since last Saturday when I was about to log into my ubuntu session as always using Unity interface, I came across with something that never happened to me before. When I logged in, the screen only showed the Desktop wallpaper but neither the bar from the top screen neither the dash bar from the left side appear, and after a few minutes of being logged in, I found myself being spammed with Ubuntu errors windows, over and over again. I logged out using ctrl+alt+del and tried my Gnome sessio. But I got exactly the same problem. I'm only able to use Gnome Classic and Classic (No Effects) Can anybody help? Hope a reply soon, and thanks in advance.

  Read the article

• RESIZE casper-rw

  - by Oldrifle

  UsING Toporesize-0.7.1 FLash drive is Transcent I want to add all unused space to casper-rw. Disk=3.72GB 2.68 used 1.GB casper-rw=1.95GB caspe=681MG I boot UBUNTU 11.10 64bit and see that size of HOME is about half of casper-rw It is working from flash drive ok. But I was not able to boot 11.10 64bit using USB 3.0 HDD. UBUNTU 11.10 32 bit on usb 2.0 HDD works ok ( currently multiboot with openSUSE) FUDUNTU 2012 on usb 3.0 hdd VERY FAST. Fast USB 3.0 8GB unit is ready. partitioned. Second part is labeled as casper-rw. Will try to install using partitions as base and home.No swap since I have 8GB ram. ANY SUGGESTION? Thanks

  Read the article

• How to uninstall a firefox plugin?

  - by HappyDeveloper

  I was trying to play minecraft in the browser, and I got asked to install a plugin called "IcedTea-Web Plugin (using IcedTea-Web 1.2 (1.2-2ubuntu1))" (something related to Java 6), which I can see now in Tools Addons Plugins. There was another plugin to install (for Java 7), I didn't know if I had to select one, so I just clicked Install or Accept. Now the game or java app only shows a black screen, so I thought I should uninstall the plugin and try installing the other one. But there doesn't seem to be a way to uninstall plugins through the firefox GUI. Any ideas?

  Read the article

• How do i disable intel graphics in a hybrid graphics setup?

  - by Eshwar

  Hi, I have a Dell Vostro 3700 version A10. The relevant bits from lspci -v | grep VGA are: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) and 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M] (rev a2) so as you can see this is one of those hybrid graphics laptops. Now, I have no interest in any kind of switching. I would like to completely disable the Intel Graphics thats on the processor. I checked in the xorg.log file and it shows that the intel card is in use. from lsmod i see it uses the i915 module. I tried blacklisting that module in /etc/modprobe.d/blacklist.conf but that didn't really work because i still couldn't use the nvidia card for display. I wish there was a BIOS option to disable, but there isn't. Some people have also suggested changing the SATA mode to compatibility, but that does not work either in this case as the intel vga controller still shows up in lspci I tried setting the busid manually in the /etc/X11/xorg.conf file but it still didn't work. It gave me an error that said something along the lines of screen not detected. any bits of xorg.log that you'd like me to attach? So what I am looking for is some solution that allows me to completely disable the use of the intel vga controller. if it was blocked somehow it'd be nice. as if it were not present. Any suggestions? I am desperate here actually. Because I cannot use the HDMI port right now on my laptop for that reason. My guess is this applies to desktops that also have Core i5 processors with onchip graphics as well as dedicated graphics cards. How would they go about solving the problem?

  Read the article

• Script to setup ubuntu as a wireless accesspoint on a bridge mode

  - by nixnotwin

  I use the following script to make my netbook a full-fledged wireless accesspoint. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

  Read the article

• Sitronix ST9RM01 touchscreen not working

  - by Josh Kelley

  I have a Sitronix ST9RM01 touchscreen that I'm trying to get working with Ubuntu 12.04. The touchscreen is apparently recognized by Linux and X - the hid_multitouch module is loaded, and lsinput and xinput both list the touchscreen as an input device - but touching the screen does absolutely nothing, and xinput test shows no events. The same touchscreen works just fine in Windows. How can I troubleshoot from here? Any suggestions?

  Read the article

• Ubuntu 12.04 does not recognize Kingston DT108 16GB memory

  - by aceqott

  I bought a Kingston DT108 16GB and Ubuntu did not recognize it.What should i do?? Output of dmesg | tail after connecting pen drive [ 1455.253010] CPU5: Package power limit notification (total events = 488) [ 1455.253013] CPU1: Package power limit notification (total events = 489) [ 1455.263966] CPU4: Package power limit normal [ 1455.263969] CPU2: Package power limit normal [ 1455.263972] CPU0: Package power limit normal [ 1455.263975] CPU6: Package power limit normal [ 1455.263998] CPU1: Package power limit normal [ 1455.264001] CPU5: Package power limit normal [ 1455.264004] CPU7: Package power limit normal [ 1455.264007] CPU3: Package power limit normal

  Read the article

• How to find the number of packages needing update from the command line?

  - by KayEss

  I'm working on some system admin automation using fabric and I'd like to be able to monitor the number of packages that need upgrading on a given machine. This is the same information that I can see when I first log in to a machine, i.e. this part: 35 packages can be updated. 22 updates are security updates. Is there a command that I can run (preferably without sudo) that gives just that information? I'd also like to know whether or not apg/dpkg thinks that the machine needs a reboot after packages are installed/upgraded. bybobu shows this at the bottom of the screen. That way I can decide whether or not to reboot machines after I update packages a bit more intelligently. I've looked at the apt-python bindings, but they seem to have a high learning curve and they also appear to be changed around a lot -- I'd like something that will work at least as far back as lucid without needing to do different things on different Ubuntu versions.

  Read the article

• how to resize an encrypted logical volume?

  - by Nirmik

  I installed Ubuntu with encryption and LVM on my entire haddisk... Now I want to resize it. How do I do This... Following this link gave me errors on step 2 - How to resize a LVM partition? error ubuntu@ubuntu:~$ sudo e2fsck -f /dev/sda5 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block e2fsck: Superblock invalid, trying backup blocks... e2fsck: Bad magic number in super-block while trying to open /dev/sda5 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 what do I do?

  Read the article

• Problem with webcam after changing camera input to my iPhone's camera [closed]

  - by andrew

  While trying to use my iPhone as a webcam I changed the paths for the camera input - now I can neither use the built-in webcam nor my iPhone's camera This is the website where I got the information from: http://www.kudanai.com/2010/11/howto-use-your-iphone-as-webcam-in.html I got stuck at the loopback part. I would just like to know how to set the path back to my built-in camera so I can at least use that. Or if there is some way to reset the camera input settings. I'm using an Inspiron 1525 running Ubuntu 12.04 LTS. memory:2.9 GiB Processor:Intel® Core™2 Duo CPU T5750 @ 2.00GHz × 2 OS type: 64-bit

  Read the article

• I can't get Ubuntu installation to start

  - by tyler

  I have a computer with the following configuration: AZUS Sabertooth Motherboard Intel I5 2500 CPU Windows 7 installed I'm trying to install linux. I first attempted to install pin guy. I burned the ISO, booted from it, got the initial menu; attempting to either run the live version from DVD, or install to system. However the process stops at a blank screen with the blinking cursor in left corner. So I downloaded Ubuntu and got the same results. Then I tried wubi and ended up in the same position. EDIT: UEFI might be part of the problem? Based on the link below I have determined that the process will be too time consuming and or risky so I'm giving up. https://help.ubuntu.com/community/UEFIBooting

  Read the article

• How to change menu hover text colour?

  - by adarshr

  I have taken a look at Gtk Theme change menu bar hover color but it doesn't seem to work on 12.04, nor can I find those lines in 12.04. My menus look like the below when hovered over for some applications such as Eclipse, Pidgin, LibreOffice etc. Where as it looks much better on Nautilus and a few others. How to change the text colour on hover to white? Edit: I use Cinnamon with Ambiance theme

  Read the article

• The Mystery of the Vanishing Disk Space

  - by Oddthinking

  My disk space is dwindling by about 2GB a day! I only have a few more days before I run out of space. $ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda4 143G 126G 11G 93% / udev 491M 4.0K 491M 1% /dev tmpfs 200M 696K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 499M 144K 499M 1% /run/shm /dev/sda2 1.9G 580M 1.2G 33% /tmp /dev/sda1 92M 29M 58M 33% /boot I have been searching for the biggest directories/log files, deleting and compressing. But I am still losing the war. Finally, I realised I have a big misunderstanding: julian@server1:~$ sudo du -h / | tail -n 1 16G / All of my files in / only add up to 16 GB. That leaves 110 GB unaccounted for! Clearly I have a misunderstanding: I thought the '/dev/sda4' line represented all the files visible from '/'. What should I be reading to understand where the other storage has gone? More details: I have an Ubuntu 11.10 server, that was set-up by data-center staff. It is running my own code (which is fairly prolific with log files, but otherwise doesn't store much stuff on the drive) duplicity for backups (which tends to store a lot of signature files) various other standard services, like Apache, nagios, etc. They are very lightly used. It has been up for about 4 months without a reboot. I lied about the du output (simplified it for effect). It also complained about not being able to access GVFS and the du processes's own resources. I believe they are irrelevant: . du: cannot access `/home/julian/.gvfs': Permission denied du: cannot access `/proc/10841/task/10841/fd/4': No such file or directory du: cannot access `/proc/10841/task/10841/fdinfo/4': No such file or directory du: cannot access `/proc/10841/fd/4': No such file or directory du: cannot access `/proc/10841/fdinfo/4': No such file or directory

  Read the article

• How can i fix some broken packages PyQt packages?

  - by Jorge

  I'm trying to install PyQt but i've met some difficulties (i.e packages that won't be updated and stuff like that). I'm not very proficient with Ubuntu, so some help is needed. Here's the output i get from the terminal: sudo apt-get install python-qt4 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: python-qt4 : Depends: libqt4-declarative (>= 4:4.7.0~rc1) but it is not going to be installed Depends: libqt4-designer (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-help (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-script (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-scripttools (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-svg (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-test (>= 4:4.7.0) but it is not going to be installed Depends: libqt4-xmlpatterns (>= 4:4.7.0) but it is not going to be installed E: Broken packages

  Read the article

• How to run php with Eclipse and XAMPP?

  - by Patterson

  I'm using eclipse kepler on ubuntu 14.04, and I want to know how do I run a php project? I already installed the plugin in eclipse for php and when command run the project, the page does not load in the browser. I know this is why I have to save the php pages in the xampp directory: / opt / lampp / htdocs. My PHP files are in the eclipse workspace in my home folder, how can I run from the workspace if that is possible?

  Read the article

• Some Flash moving portions displayed incorrectly in Firefox 5

  - by hansioux

  I am using 11.04 Natty and Firefox 5. Video card is ATI Radeon HD 4670 and I am using the newest proprietary driver downloaded from ATI website. Some Flash apps, such as embedded youtube vids and a couple of other apps, are displayed incorrectly (i think with real embed instead of the new iframe embed). What happens is as a portion of the flash moves around, parts of it keeps blanking out. For the embedded youtube vid, it greys out. Some other apps turns transparent, showing the webpage's background. The same flash apps runs perfectly fine for Google Chromium on the same computer. I have another computer with 10.10 Maverick, Firefox 5 and nVidia card and driver, and it they also run fine. So, anyone has an idea of what is causing the problem?

  Read the article

• Ubuntu boots to terminal on start up

  - by Jules

  For a long time I've been unable to get updates due to a "repositories not found" error. Yesterday someone fixed this for me but after installing 94 days worth of updates my system wanted to restart. It looks like it is booting normally but then it opens a terminal and asks for my login and password. I had tried Ctrl+ Alt +F7 and startx to no avail. Here is everything that appears on screen when I turn the computer on. Ubuntu 10.04.4 LTS box-o-doom tty1 box-o-doom login:julian password: last login: Sun Jul 8 10:28:02 BST tty1 Linux box-o-doom 2.6.32-41-generic-pae #91-Ubuntu SMP Wed Jun 13 12:00:09 UTC 20 12 i686 GNU/Linux Ubuntu 10.04.4 LTS Welcome to Ubuntu! *Documentation: http://help.ubuntu.com julian@box-o-doom:~$_ i then tried dmesg which produced hundreds of lines all very similar to the first line reproduced here [ 9.453119] type=1505 audit1341742405.022:10): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script" follwed by this at the end [ 9.475880] alloc irq_desc for 27 on node-1 [ 9.475883] alloc kstat_irqs on node-1 [ 9.475890]forcedeth 0000:00:07.0: irq27 for MSI/MSI-X [ 9.760031] hda_code:ALC662 rev1: BIOS auto-probing. [ 10.048095] input:HDA Digital PCBeep as /devices/pci 0000:00:05.o/inp ut/input6 [ 10.862278] ppdev: user-space parallel port driver [ 20.268018] eth0: no IPv6 routers present julian@box-o-doom:~$_ results of startx lots of text scrolls off the screen and i have no way of reading it. but everything i can see is reproduced below current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version Markers: (--) probed, (**) from config file, (==) defult setting, (++) from command line, (!!) notice, (II) informational. (WW) Warning, (EE) error, (NI) not implemented, (??) unknown. (==) log file: "/var/log/Xorg.0.log", Time: SUn Jul 8 12:02:23 2012 (==) using config file: "/etc/X11/xorg.conf" (==)using config directory: "/usr/lib/X11/xorg.conf.d" FATAL: Module nvidia not found. (EE) NVIDIA: Failed to load the NVIDIA kernal module please check your (EE) NVIDIA: systems kernal log for aditional error messages. (EE) Failed to load module "nvidia" (module specific error, 0) (EE) No drivers available. Fatal server error: no screens found please consult the X.org foundation support at http://wiki.x.org for help please also check the log files at "/var/log/X.org.0.log" for aditional informati on ddxSigGiveUp: Closing log giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No suck process (errno 3): server error julian@box-o-doom:~$_

  Read the article

• Cannot move/drag/drop windows/items in remote VNC session

  - by hansioux

  I find it a little hard to believe that no one here has asked this question, I tried searching for it but it isn't asked, so here goes: I setup a Ubuntu desktop computer with VNC to use as a server. And use another Ubuntu desktop computer to VNC into it. The rest of the VNC works ok, but drag and drop with mouse is gone. Thus I can not move windows, or drag and drop items via VNC. I am using the default remote desktop in System - Preferences to setup my server. And use Remmina as my client. The same happens using MS Windows's VNC clients connecting to my Ubuntu desktop. I did a bit of searching on google, and there are actually a lot of reports regarding this issue. But, oddly there is no solution. There are even bug reports made for this since Ubuntu 9.10, yet here it still is in Ubuntu 11.04. There have been suggestions that the bugs is in gtk, as see in link below: http://ubuntuforums.org/showthread.php?t=1497635&page=2 libgtk2.0-0 stable(lenny) -> DnD works libgtk2.0-0 lenny-backport (libgtk2.0-0_2.18.6-1~bpo50+1_i386) -> DnD still works libgtk2.0-0 testing (libgtk2.0-0_2.20.1-2_i386) -> DnD broken please don't give answers such as "use NX", "use ssh -x" or "use x11vnc". I am aware that some people don't have this problem with x11vnc, and I have setup x11vnc before, but i can't for this setup. I am setting this up so Windows only friends/families can use it.

  Read the article

• How to align Conky text to centre of desktop?

  - by Dominic Jordan Hasford

  I am working on creating an entire Theme based off of Coldplay's Mylo Xyloto album. This is my first time working with Conky and theme creation. I started off by creating the Conky setup: I would like to how to centre the text in Conky. First to have it placed in the centre of my desktop, and second to have the text centre (think the Centre align button in word). It is supposed to be aligned like the album art: Conky Script http://paste.ubuntu.com/1230966/ End Result using Answer bellow:

  Read the article

• Kickstart file is ignored by the installer

  - by Nuz

  I have fallowed this guide to create a kickstart file to install ubuntu automatically. However the problem is that when I boot the menu item label autoinstall menu label ^Auto install kernel /casper/vmlinuz append file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz file=/cdrom/ks.cfg -- it doesn't start the installer. I've tried using automatic-ubiquity as one of the parameters, but still it seems that kickstart file isn't used. Is there a way to make this work, or is there another way (preferably without using network, like FAI).

  Read the article

• sell skimmed dump+pin([email protected])wu transfer,bank transfer,paypal+mailpass

  - by bestseller

  http://megareserve.blogspot.com///////// [email protected]////gmail:[email protected] Sell, Cvv, Bank Logins, Tracks, PayPal, Transfers, WU, Credit Cards, Card, Hacks, Citi, Boa, Visa, MasterCard, Amex, American Express, Make Money Fast, Stolen, Cc, C++, Adder, Western, Union, Banks, Of, America, Wellsfargo, Liberty, Reserve, Gram, Mg, LR, AlertPay ..PAYMENT METHOD LIBERTYRESERVE AND WESTERNUNION ONLY........ Ccv EU is $ 6 per ccv (Visa + Master) Ccv EU is $ 7 per ccv (Amex + Discover) Ccv Au is $ 6 per ccv Ccv Italy is 15 $ per cc sweden 12$ spain 10$ france 12$ Ccv US is $ 1.5 per ccv (Visa) Ccv US is $ 2 per ccv (master) Ccv US is $ 3 per ccv (Amex + Discover) Ccv UK is $ 5 per ccv (Visa + Master) Ccv UK is $ 6 per ccv (Amex + swith) Ccv Ca is $ 6 per ccv (Visa+ Master) Ccv Ca is $ 9 per ccv (Visa Business + Visa Gold) Ccv Germany is 14$ Per Ccv Ccv DOB with US is 15 $ per ccv Ccv DOB with UK is 19 $ per ccv Ccv DOB + BIN with UK 25$ per ccv Ccv US full info is 40 $ per ccv Ccv UK full info is 60 $ per ccv 1 Uk check bins= 12.5$/1cvv 1 Sock live = 1$/1sock live 5day yahoo:[email protected] gmail:[email protected] Balance In Chase:.........70K To 155K ========300$ Balance In Wachovia:.........24K To 80K==========180$ Balance In Boa..........75K To 450K==========400$ Balance In Credit Union:.........Any Amount:=========420$ Balance In Hallifax..........ANY AMOUNT=========420$ Balance In Compass..........ANY AMOUNT=========400$ Balance In Wellsfargo..........ANY AMOUNT=========400$ Balance In Barclays..........80K To 100K=========550$ Balance In Abbey:.........82K ==========650$ Balance in Hsbc:.........50K========650$ and more 1 Paypal with pass email = 50$/paypal 1 Paypal don't have pass email = 20$/Paypal 1 Banklogin us or uk (personel)= 550$ yahoo :[email protected] gmail :[email protected] Track 1/2 Visa Classic, MasterCard Standart US - 13$ UK - 17$ EU - 24$ AU - 26$ Track 1/2 Visa Gold | Platinum | Business | Signature, MasterCard Gold | Platinum US - 17$ UK - 20$ EU - 28$ AU - 30$ Bank transfer Balance 71.000$ CITIBANK SOUTH DAKOTA, N.A. Balance 65.000$ Wachovia: 76.000$ Abbey: 65.000£ Hsbc : 87.000$ Hallifax : 97.000£ Barclays: 110.000£ AHLI UNITED BANK --- 80.000£ LLOYDSTSB ---------- 100.000£ BANK OF SCOTLAND --- 123.000£ BOA ----------210.000$ UBS ---------- 152.000$ RBC BANK ------ 245.000$ BANK OF CANADA -------- 78.000$ BDC ---------- 281.000$ BANK LAURENTIENNE ----- 241.000$ please no test yahoo: [email protected] gmail: [email protected] website ; http://megareserve.blogspot.com Prices For Bin and Its List: 5434, 5419, 4670,374288,545140,454634,3791 with d.o.b,4049,4462,4921.4929.46274547,5506,5569,5404,5031,4921, 5505,5506,4921,4550 ,4552,4988,5186,4462,4543,4567 ,4539,5301,4929,5521 , 4291,5051,4975,5413 5255 4563,4547 4505,4563 5413 5255,5521,5506,4921,4929,54609 7,5609,54609,4543, 4975,5432,5187 ,4973,4627,4049,4779,426565,55 05, 5549, 5404, 5434, 5419, 4670,456730,541361, 451105,4670,5505, 5549, 5404, UK Nomall NO BINS(Serial) with DOB is :10$ UK with BINS(Serial) with DOB is :15$ UK Nomall no BINS(Serial) no DOB is: 6$ UK with BINS(Serial) is :12$ Please do not request : cc for TEST and FREE. DON'T CONTACT ME IF YOU NOT READY NEED TO BUY .

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >