insurance policy administration - Page 185

amplified reflected attack on dns

- by Mike Janson

The term is new to me. So I have a few questions about it. I've heard it mostly happens with DNS servers? How do you protect against it? How do you know if your servers can be used as a victim? This is a configuration issue right? my named conf file include "/etc/rndc.key"; controls { inet 127.0.0.1 allow { localhost; } keys { "rndc-key"; }; }; options { /* make named use port 53 for the source of all queries, to allow * firewalls to block all ports except 53: */ // query-source port 53; /* We no longer enable this by default as the dns posion exploit has forced many providers to open up their firewalls a bit */ // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default pid-file "/var/run/named/named.pid"; dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; /* memstatistics-file "data/named_mem_stats.txt"; */ allow-transfer {"none";}; }; logging { /* If you want to enable debugging, eg. using the 'rndc trace' command, * named will try to write the 'named.run' file in the $directory (/var/named"). * By default, SELinux policy does not allow named to modify the /var/named" directory, * so put the default debug log file in data/ : */ channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { /* This view sets up named to be a localhost resolver ( caching only nameserver ). * If all you want is a caching-only nameserver, then you need only define this view: */ match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; /* these are zones that contain definitions for all the localhost * names and addresses, as recommended in RFC1912 - these names should * ONLY be served to localhost clients: */ include "/var/named/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above :

Read the article

How does the Cloud compare to Colocation? And development too

- by David

Currently I/we run a SaaS web application where each subscriber has their own physical instance of the application in addition to their own database. The setup has each web application instance deployed on two different IIS boxes both for load-balancing and redundancy (the machines have their Windows Update install times 12 hours apart, for example). Databases are mirrored on two different SQL Server 2012 machines with AlwaysOn for uptime. I don't make use of SQL Server clustering (as it doesn't provide storage-level failover: we don't have a shared storage box). Because it's a Windows setup it means there are two Domain Controllers (we cheat: they're both Mac Minis, 17W each, which keeps our colo power costs low). Finally there's also an Exchange server (Mailbox, Hub Transport and Client Access). One of the SQL Servers also doubles-up as an Exchange Hub Transport. Running costs are about $700 a month for our quarter-rack colocation (which includes power and peering/transfer), then there's about $150 a month for SPLA licensing, so $850 a month in total. Then there's the hard-to-quantify cost of administration, but I reckon I spend a couple of hours a week checking-in on the servers: reviewing event logs, etc. I keep getting bombarded by ads and manufactured news stories about how great "the cloud" is. Back in 2008 when the cloud was taking off I was reading up about the proper "cloud" services like Google AppEngine, where you write in Python against Google's API and that's how they scale your application across servers and also use their database provider for scaling storage. Simple enough to understand. Then came along Amazon, and I understand how Amazon Storage works, but I'm not sure how Amazon Compute works: web application pages don't take much CPU time to compute, how do you even quantify usage anyway? Finally, RackSpace gets in the act and now I'm really confused. RackSpace advertise "Cloud" SQL Server 2012 available for about "$0.70 per hour", going by how they advertise it I thought the "hour" meant the sum of CPU time, IO blocking time, maybe time spent transferring data, so for a low-intensity application that works out pretty cheap then? Nope. I went on to a Sales Chat window and spoke to one of their advisors. They told me the $0.70/hour was actually for every hour the SQL Server is running... but who wants a SQL Server for only a few hours? You're going to need it available 24 hours a day for months on end. $0.70 * 24 * 31 works out at $520 a month, which is rediculously expensive for SQL Server. An SPLA license for SQL Server is only $50 a month or so. That $520 a month does not include "fanatical support", and you also need to stack on top the costs of the host Windows server instance too. From what I can tell, Rackspace's "Cloud" products seem like like an cynical rebranding of an overpriced VPS service, but priced by the hour. I have the same confusion about Windows Azure which uses similar terms to describe the products available, but I think that's because Azure offers both traditional shared webhosting in addition to their own APIs you can target for scalable applications.

Read the article

SQL Server Log File Won't Shrink due cause "log are pending replication" on non replicated DB?

- by user796466

I have a non Mission Critial DB 9am-5pm SQL Server database that I have set up to do nightly full backups and log backups every 30 minutes during business hours. The database is in full recovery and normally I have no reason to truncate/shrink logs unless I do some heavy maintenance. Log backups manage the size with no issue. However I have not been at this client for several weeks and upon inspection I noticed that the log had grown to about 10 times the size of the .mdf file. I poked around backups had been running and I had not gotten any severity error alerts (SQL mail). I attempted to put DB in simple recovery and shrink the log, this was no good. I precede to try a log backup and I got: The log was not truncated because records at the beginning of the log are pending replication or Change Data Capture. Ensure the Log Reader Agent or capture job is running or use sp_repldone to mark transactions as distributed or captured. Restart SQL Server rinse repeat same thing ... I said ??? Replication is not nor ever has been set up on this DB or database /server ??? So the log backups have not been flushing the .ldf. So I did a couple hours of research and I found: http://www.sqlmonster.com/Uwe/Forum.aspx/sql-server/5445/Log-file-is-not-truncated-inspite-of-regular-log-backup http://www.eggheadcafe.com/software/aspnet/30708322/the-log-was-not-truncated-because-records-at-the-beginning-of-the-log-are-pending-replication.aspx seems to be some kind of poorly documented bug ?? The solution seems to have been to run exec sp_repldone, more precisley EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time= 0, @reset = 1 This procedure can be used in emergency situations to allow truncation of the transaction log when transactions pending replication are present. Using this procedure prevents Microsoft SQL Server 2000 from replicating the database until the database is unpublished and republished. ~ MSDN When I do that I get the following Msg 18757, Level 16, State 1, Procedure sp_repldone, Line 1 Unable to execute procedure. The database is not published. Execute the procedure in a database that is published for replication. Which makes sense Because the DB has never been published for replication. I have several questions: A) First and foremost is, WTF is going on ? What is causeing this, I am interested in knowing the why here ? Is this genuinley a bug or is there some aspect of the backup that is not functioning properly that cause's the DB to mimick a replicated state ? Someone please edify me on this. B) Second ... Do I really have to publish / replicate this DB to exec this SP to fix this ??? Sounds crazy or is there some T-SQL that I can put it in a published state exec the proc and be on my way ... C) Third, if I do indeed have to publish this database to exec the SP to release this unneeded mis replicated/intended log , to get my .ldf file and backup back on track. How do I publish the database without an online host that it is asking for ??? I don't generally do this kind of database administration and need some guidance. Sorry if this is too verbose but just voicing the question helps me clarify it ... Thank you in advance for your help

Read the article

Introducing Oracle VM Server for SPARC

- by Honglin Su

As you are watching Oracle's Virtualization Strategy Webcast and exploring the great virtualization offerings of Oracle VM product line, I'd like to introduce Oracle VM Server for SPARC -- highly efficient, enterprise-class virtualization solution for Sun SPARC Enterprise Systems with Chip Multithreading (CMT) technology. Oracle VM Server for SPARC, previously called Sun Logical Domains, leverages the built-in SPARC hypervisor to subdivide supported platforms' resources (CPUs, memory, network, and storage) by creating partitions called logical (or virtual) domains. Each logical domain can run an independent operating system. Oracle VM Server for SPARC provides the flexibility to deploy multiple Oracle Solaris operating systems simultaneously on a single platform. Oracle VM Server also allows you to create up to 128 virtual servers on one system to take advantage of the massive thread scale offered by the CMT architecture. Oracle VM Server for SPARC integrates both the industry-leading CMT capability of the UltraSPARC T1, T2 and T2 Plus processors and the Oracle Solaris operating system. This combination helps to increase flexibility, isolate workload processing, and improve the potential for maximum server utilization. Oracle VM Server for SPARC delivers the following: Leading Price/Performance - The low-overhead architecture provides scalable performance under increasing workloads without additional license cost. This enables you to meet the most aggressive price/performance requirement Advanced RAS - Each logical domain is an entirely independent virtual machine with its own OS. It supports virtual disk mutipathing and failover as well as faster network failover with link-based IP multipathing (IPMP) support. Moreover, it's fully integrated with Solaris FMA (Fault Management Architecture), which enables predictive self healing. CPU Dynamic Resource Management (DRM) - Enable your resource management policy and domain workload to trigger the automatic addition and removal of CPUs. This ability helps you to better align with your IT and business priorities. Enhanced Domain Migrations - Perform domain migrations interactively and non-interactively to bring more flexibility to the management of your virtualized environment. Improve active domain migration performance by compressing memory transfers and taking advantage of cryptographic acceleration hardware. These methods provide faster migration for load balancing, power saving, and planned maintenance. Dynamic Crypto Control - Dynamically add and remove cryptographic units (aka MAU) to and from active domains. Also, migrate active domains that have cryptographic units. Physical-to-virtual (P2V) Conversion - Quickly convert an existing SPARC server running the Oracle Solaris 8, 9 or 10 OS into a virtualized Oracle Solaris 10 image. Use this image to facilitate OS migration into the virtualized environment. Virtual I/O Dynamic Reconfiguration (DR) - Add and remove virtual I/O services and devices without needing to reboot the system. CPU Power Management - Implement power saving by disabling each core on a Sun UltraSPARC T2 or T2 Plus processor that has all of its CPU threads idle. Advanced Network Configuration - Configure the following network features to obtain more flexible network configurations, higher performance, and scalability: Jumbo frames, VLANs, virtual switches for link aggregations, and network interface unit (NIU) hybrid I/O. Official Certification Based On Real-World Testing - Use Oracle VM Server for SPARC with the most sophisticated enterprise workloads under real-world conditions, including Oracle Real Application Clusters (RAC). Affordable, Full-Stack Enterprise Class Support - Obtain worldwide support from Oracle for the entire virtualization environment and workloads together. The support covers hardware, firmware, OS, virtualization, and the software stack. SPARC Server Virtualization Oracle offers a full portfolio of virtualization solutions to address your needs. SPARC is the leading platform to have the hard partitioning capability that provides the physical isolation needed to run independent operating systems. Many customers have already used Oracle Solaris Containers for application isolation. Oracle VM Server for SPARC provides another important feature with OS isolation. This gives you the flexibility to deploy multiple operating systems simultaneously on a single Sun SPARC T-Series server with finer granularity for computing resources. For SPARC CMT processors, the natural level of granularity is an execution thread, not a time-sliced microsecond of execution resources. Each CPU thread can be treated as an independent virtual processor. The scheduler is naturally built into the CPU for lower overhead and higher performance. Your organizations can couple Oracle Solaris Containers and Oracle VM Server for SPARC with the breakthrough space and energy savings afforded by Sun SPARC Enterprise systems with CMT technology to deliver a more agile, responsive, and low-cost environment. Management with Oracle Enterprise Manager Ops Center The Oracle Enterprise Manager Ops Center Virtualization Management Pack provides full lifecycle management of virtual guests, including Oracle VM Server for SPARC and Oracle Solaris Containers. It helps you streamline operations and reduce downtime. Together, the Virtualization Management Pack and the Ops Center Provisioning and Patch Automation Pack provide an end-to-end management solution for physical and virtual systems through a single web-based console. This solution automates the lifecycle management of physical and virtual systems and is the most effective systems management solution for Oracle's Sun infrastructure. Ease of Deployment with Configuration Assistant The Oracle VM Server for SPARC Configuration Assistant can help you easily create logical domains. After gathering the configuration data, the Configuration Assistant determines the best way to create a deployment to suit your requirements. The Configuration Assistant is available as both a graphical user interface (GUI) and terminal-based tool. Oracle Solaris Cluster HA Support The Oracle Solaris Cluster HA for Oracle VM Server for SPARC data service provides a mechanism for orderly startup and shutdown, fault monitoring and automatic failover of the Oracle VM Server guest domain service. In addition, applications that run on a logical domain, as well as its resources and dependencies can be controlled and managed independently. These are managed as if they were running in a classical Solaris Cluster hardware node. Supported Systems Oracle VM Server for SPARC is supported on all Sun SPARC Enterprise Systems with CMT technology. UltraSPARC T2 Plus Systems · Sun SPARC Enterprise T5140 Server · Sun SPARC Enterprise T5240 Server · Sun SPARC Enterprise T5440 Server · Sun Netra T5440 Server · Sun Blade T6340 Server Module · Sun Netra T6340 Server Module UltraSPARC T2 Systems · Sun SPARC Enterprise T5120 Server · Sun SPARC Enterprise T5220 Server · Sun Netra T5220 Server · Sun Blade T6320 Server Module · Sun Netra CP3260 ATCA Blade Server Note that UltraSPARC T1 systems are supported on earlier versions of the software.Sun SPARC Enterprise Systems with CMT technology come with the right to use (RTU) of Oracle VM Server, and the software is pre-installed. If you have the systems under warranty or with support, you can download the software and system firmware as well as their updates. Oracle Premier Support for Systems provides fully-integrated support for your server hardware, firmware, OS, and virtualization software. Visit oracle.com/support for information about Oracle's support offerings for Sun systems. For more information about Oracle's virtualization offerings, visit oracle.com/virtualization.

Read the article

Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1

- by rajbk

The Open Data Protocol, referred to as OData, is a new data-sharing standard that breaks down silos and fosters an interoperative ecosystem for data consumers (clients) and producers (services) that is far more powerful than currently possible. It enables more applications to make sense of a broader set of data, and helps every data service and client add value to the whole ecosystem. WCF Data Services (previously known as ADO.NET Data Services), then, was the first Microsoft technology to support the Open Data Protocol in Visual Studio 2008 SP1. It provides developers with client libraries for .NET, Silverlight, AJAX, PHP and Java. Microsoft now also supports OData in SQL Server 2008 R2, Windows Azure Storage, Excel 2010 (through PowerPivot), and SharePoint 2010. Many other other applications in the works. * This post walks you through how to create an OData feed, define a shape for the data and pre-filter the data using Visual Studio 2010, WCF Data Services and the Entity Framework. A sample project is attached at the bottom of Part 2 of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Create the Web Application File –› New –› Project, Select “ASP.NET Empty Web Application” Add the Entity Data Model Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “ADO.NET Entity Data Model” under "Data”. Name the Model “Northwind” and click “Add”. In the “Choose Model Contents”, select “Generate Model From Database” and click “Next” Define a connection to your database containing the Northwind database in the next screen. We are going to expose the Products table through our OData feed. Select “Products” in the “Choose your Database Object” screen. Click “Finish”. We are done creating our Entity Data Model. Save the Northwind.edmx file created. Add the WCF Data Service Right click on the Web Application in the Solution Explorer and select “Add New Item..” Select “WCF Data Service” from the list and call the service “DataService” (creative, huh?). Click “Add”. Enable Access to the Data Service Open the DataService.svc.cs class. The class is well commented and instructs us on the next steps. public class DataService : DataService< /* TODO: put your data source class name here */ > { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { // TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc. // Examples: // config.SetEntitySetAccessRule("MyEntityset", EntitySetRights.AllRead); // config.SetServiceOperationAccessRule("MyServiceOperation", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } Replace the comment that starts with “/* TODO:” with “NorthwindEntities” (the entity container name of the Model we created earlier). WCF Data Services is initially locked down by default, FTW! No data is exposed without you explicitly setting it. You have explicitly specify which Entity sets you wish to expose and what rights are allowed by using the SetEntitySetAccessRule. The SetServiceOperationAccessRule on the other hand sets rules for a specified operation. Let us define an access rule to expose the Products Entity we created earlier. We use the EnititySetRights.AllRead since we want to give read only access. Our modified code is shown below. public class DataService : DataService<NorthwindEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Products", EntitySetRights.AllRead); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } We are done setting up our ODataFeed! Compile your project. Right click on DataService.svc and select “View in Browser” to see the OData feed. To view the feed in IE, you must make sure that "Feed Reading View" is turned off. You set this under Tools -› Internet Options -› Content tab. If you navigate to “Products”, you should see the Products feed. Note also that URIs are case sensitive. ie. Products work but products doesn’t. Filtering our data OData has a set of system query operations you can use to perform common operations against data exposed by the model. For example, to see only Products in CategoryID 2, we can use the following request: /DataService.svc/Products?$filter=CategoryID eq 2 At the time of this writing, supported operations are $orderby, $top, $skip, $filter, $expand, $format†, $select, $inlinecount. Pre-filtering our data using Query Interceptors The Product feed currently returns all Products. We want to change that so that it contains only Products that have not been discontinued. WCF introduces the concept of interceptors which allows us to inject custom validation/policy logic into the request/response pipeline of a WCF data service. We will use a QueryInterceptor to pre-filter the data so that it returns only Products that are not discontinued. To create a QueryInterceptor, write a method that returns an Expression<Func<T, bool>> and mark it with the QueryInterceptor attribute as shown below. [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.Discontinued == false; } Viewing the feed after compilation will only show products that have not been discontinued. We also confirm this by looking at the WHERE clause in the SQL generated by the entity framework. SELECT [Extent1].[ProductID] AS [ProductID], ... ... [Extent1].[Discontinued] AS [Discontinued] FROM [dbo].[Products] AS [Extent1] WHERE 0 = [Extent1].[Discontinued] Other examples of Query/Change interceptors can be seen here including an example to filter data based on the identity of the authenticated user. We are done pre-filtering our data. In the next part of this post, we will see how to shape our data. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2 Foot Notes * http://msdn.microsoft.com/en-us/data/aa937697.aspx † $format did not work for me. The way to get a Json response is to include the following in the request header “Accept: application/json, text/javascript, */*” when making the request. This is easily done with most JavaScript libraries.

Read the article

Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard Drive

- by Trevor Bekolay

Deleting files or quickly formatting a drive isn’t enough for sensitive personal information. We’ll show you how to get rid of it for good using a Ubuntu Live CD. When you delete a file in Windows, Ubuntu, or any other operating system, it doesn’t actually destroy the data stored on your hard drive, it just marks that data as “deleted.” If you overwrite it later, then that data is generally unrecoverable, but if the operating system don’t happen to overwrite it, then your data is still stored on your hard drive, recoverable by anyone who has the right software. By securely delete files or entire hard drives, your data will be gone for good. Note: Modern hard drives are extremely sophisticated, as are the experts who recover data for a living. There is no guarantee that the methods covered in this article will make your data completely unrecoverable; however, they will make your data unrecoverable to the majority of recovery methods, and all methods that are readily available to the general public. Shred individual files Most of the data stored on your hard drive is harmless, and doesn’t reveal anything about you. If there are just a few files that you know you don’t want someone else to see, then the easiest way to get rid of them is a built-in Linux utility called shred. Open a terminal window by clicking on Applications at the top-left of the screen, then expanding the Accessories menu and clicking on Terminal. Navigate to the file that you want to delete using cd to change directories and ls to list the files and folders in the current directory. As an example, we’ve got a file called BankInfo.txt on a Windows NTFS-formatted hard drive. We want to delete it securely, so we’ll call shred by entering the following in the terminal window: shred <file> which is, in our example: shred BankInfo.txt Notice that our BankInfo.txt file still exists, even though we’ve shredded it. A quick look at the contents of BankInfo.txt make it obvious that the file has indeed been securely overwritten. We can use some command-line arguments to make shred delete the file from the hard drive as well. We can also be extra-careful about the shredding process by upping the number of times shred overwrites the original file. To do this, in the terminal, type in: shred –remove –iterations=<num> <file> By default, shred overwrites the file 25 times. We’ll double this, giving us the following command: shred –remove –iterations=50 BankInfo.txt BankInfo.txt has now been securely wiped on the physical disk, and also no longer shows up in the directory listing. Repeat this process for any sensitive files on your hard drive! Wipe entire hard drives If you’re disposing of an old hard drive, or giving it to someone else, then you might instead want to wipe your entire hard drive. shred can be invoked on hard drives, but on modern file systems, the shred process may be reversible. We’ll use the program wipe to securely delete all of the data on a hard drive. Unlike shred, wipe is not included in Ubuntu by default, so we have to install it. Open up the Synaptic Package Manager by clicking on System in the top-left corner of the screen, then expanding the Administration folder and clicking on Synaptic Package Manager. wipe is part of the Universe repository, which is not enabled by default. We’ll enable it by clicking on Settings > Repositories in the Synaptic Package Manager window. Check the checkbox next to “Community-maintained Open Source software (universe)”. Click Close. You’ll need to reload Synaptic’s package list. Click on the Reload button in the main Synaptic Package Manager window. Once the package list has been reloaded, the text over the search field will change to “Rebuilding search index”. Wait until it reads “Quick search,” and then type “wipe” into the search field. The wipe package should come up, along with some other packages that perform similar functions. Click on the checkbox to the left of the label “wipe” and select “Mark for Installation”. Click on the Apply button to start the installation process. Click the Apply button on the Summary window that pops up. Once the installation is done, click the Close button and close the Synaptic Package Manager window. Open a terminal window by clicking on Applications in the top-left of the screen, then Accessories > Terminal. You need to figure our the correct hard drive to wipe. If you wipe the wrong hard drive, that data will not be recoverable, so exercise caution! In the terminal window, type in: sudo fdisk -l A list of your hard drives will show up. A few factors will help you identify the right hard drive. One is the file system, found in the System column of the list – Windows hard drives are usually formatted as NTFS (which shows up as HPFS/NTFS). Another good identifier is the size of the hard drive, which appears after its identifier (highlighted in the following screenshot). In our case, the hard drive we want to wipe is only around 1 GB large, and is formatted as NTFS. We make a note of the label found under the the Device column heading. If you have multiple partitions on this hard drive, then there will be more than one device in this list. The wipe developers recommend wiping each partition separately. To start the wiping process, type the following into the terminal: sudo wipe <device label> In our case, this is: sudo wipe /dev/sda1 Again, exercise caution – this is the point of no return! Your hard drive will be completely wiped. It may take some time to complete, depending on the size of the drive you’re wiping. Conclusion If you have sensitive information on your hard drive – and chances are you probably do – then it’s a good idea to securely delete sensitive files before you give away or dispose of your hard drive. The most secure way to delete your data is with a few swings of a hammer, but shred and wipe from a Ubuntu Live CD is a good alternative! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDScan a Windows PC for Viruses from a Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveCreate a Bootable Ubuntu USB Flash Drive the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

Read the article

Stream Music and Video Over the Internet with Windows Media Player 12

- by DigitalGeekery

A new feature in Windows Media Player 12, which is included with Windows 7, is being able to stream media over the web to other Windows 7 computers. Today we will take a look at how to set it up and what you need to begin. Note: You will need to perform this process on each computer that you want to use. What You’ll Need Two computers running Windows 7 Home Premium, Professional, or Ultimate. The host, or home computer that you will be streaming the media from, cannot be on a public network or part of domain. Windows Live ID UPnP or Port Forwarding enabled on your home router Media files added to your Windows Media Player library Windows Live ID Sign up online for a Windows Live ID if you do not already have one. See the link below for a link to Windows Live. Configuring the Windows 7 Computers Open Windows Media Player and go to the library section. Click on Stream and then “Allow Internet access to home media.” The Internet Home Media Access pop up window will prompt you to link your Windows Live ID to a user account. Click “Link an online ID.” If you haven’t already installed the Windows Live ID Sign-In Assistant, you will be taken to Microsoft’s website and prompted to download it. Once you have completed the Windows Live download assistant install, you will see Windows Live ID online provider appear in the “Link Online IDs” window. Click on “Link Online ID.” Next, you’ll be prompted for a Windows Live ID and password. Enter your Windows Live ID and password and click “Sign In.” A pop up window will notify you that you have successfully allowed Internet access to home media. Now, you will have to repeat the exact same configuration on the 2nd Windows 7 computer. Once you have completed the same configuration on your 2nd computer, you might also need to configure your home router for port forwarding. If your router supports UPnP, you may not need to manually forward any ports on your router. So, this would be a good time to test your connection. Go to a nearby hotspot, or perhaps a neighbor’s house, and test to see if you can stream your media. If not, you’ll need to manually forward the ports. You can always choose to forward the ports anyway, just in case. Note: We tested on a Linksys WRT54GL router, which supports UPnP, and found we still needed to manually forward the ports. Finding the ports to forward on the router Open Windows Media Player and make sure you are in Library view. Click on “Stream” on the top menu, and select “Allow Internet access to home media.” On the “Internet Home Media Access” window, click on “Diagnose connections.” The “Internet Streaming Diagnostic Tool” will pop up. Click on “Port forwarding information” near the bottom. On the “Port Forwarding Information” window you will find both the Internal and External Port numbers you will need to forward on your router. The Internal port number should always be 10245. The external number will be different depending on your computer. Microsoft also recommends forwarding port 443. Configuring the Router Next, you’ll need to configure Port Forwarding on your home router. We will show you the steps for a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Administration Tab along the top, click the “Applications & Gaming Tab, and then the “Port Range Forward” tab below it. Under “Application,” type in a name. It can be any name you choose. In both the “Start” and “End” boxes, type the port number. Enter the IP address of your home computer in the IP address column. Click the check box under “Enable.” Do this for both the internal and external port numbers and port 443. When finished, click the “Save Settings” button. Note: It’s highly recommended that you configure your home computer with a static IP address When you’re ready to play your media over the Internet, open up Windows Media Player and look for your host computer and username listed under “Other Libraries.” Click on it expand the list to see your media libraries. Choose a library and a file to play. Now you can enjoy your streaming media over the Internet. Conclusion We found media streaming over the Internet to work fairly well. However, we did see a loss of quality with streaming video. Also, Recorded TV .wtv and dvr-ms files did not play at all. Check out our previous article to see how to stream media share and stream media between Windows 7 computers on your home network. Similar Articles Productive Geek Tips Enable Media Streaming in Windows Home Server to Windows Media PlayerFixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Share and Stream Digital Media Between Windows 7 Machines On Your Home NetworkLearning Windows 7: Manage Your Music with Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox)

Read the article

Solaris 11 Launch Blog Carnival Roundup

- by constant

Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

Read the article

Getting Started with ASP.NET Membership, Profile and RoleManager

- by Ben Griswold

A new ASP.NET MVC project includes preconfigured Membership, Profile and RoleManager providers right out of the box. Try it yourself – create a ASP.NET MVC application, crack open the web.config file and have a look. First, you’ll find the ApplicationServices database connection: <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> Notice the connection string is referencing the aspnetdb.mdf database hosted by SQL Express and it’s using integrated security so it’ll just work for you without having to call out a specific database login or anything. Scroll down the file a bit and you’ll find each of the three noted sections: <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/" /> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/" /> </providers> </profile> <roleManager enabled="false"> <providers> <clear /> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </roleManager> Really. It’s all there. Still don’t believe me. Run the application, walk through the registration process and finally login and logout. Completely functional – and you didn’t have to do a thing! What else? Well, you can manage your users via the Configuration Manager which is hiding in Visual Studio behind Projects > ASP.NET Configuration. The ASP.NET Web Site Administration Tool isn’t MVC-specific (neither is the Membership, Profile or RoleManager stuff) but it’s neat and I hardly ever see anyone using it. Here you can set up and edit users, roles, and set access permissions for your site. You can manage application settings, establish your SMTP settings, configure debugging and tracing, define default error page and even take your application offline. The UI is rather plain-Jane but it works great. And here’s the best of all. Let’s say you, like most of us, don’t want to run your application on top of the aspnetdb.mdf database. Let’s suppose you want to use your own database and you’d like to add the membership stuff to it. Well, that’s easy enough. Take a look inside your [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\ folder. Here you’ll find a bunch of files. If you were to run the InstallCommon.sql, InstallMembership.sql, InstallRoles.sql and InstallProfile.sql files against the database of your choices, you’d be installing the same membership, profile and role artifacts which are found in the aspnet.db to your own database. Too much trouble? Okay. Run [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\aspnet_regsql.exe from the command line instead. This will launch the ASP.NET SQL Server Setup Wizard which walks you through the installation of those same database objects into the new or existing database of your choice. You may not always have the luxury of using this tool on your destination server, but you should use it whenever you can. Last tip: don’t forget to update the ApplicationServices connectionstring to point to your custom database after the setup is complete. At the risk of sounding like a smarty, everything I’ve mentioned in this post has been around for quite a while. The thing is that not everyone has had the opportunity to use it. And it makes sense. I know I’ve worked on projects which used custom membership services. Why bother with the out-of-the-box stuff, right? And the .NET framework is so massive, who can know it all. Well, eventually you might have a chance to architect your own solution using any implementation you’d like or you will have the time to play around with another aspect of the framework. When you do, think back to this post.

Read the article

Change or Reset Windows Password from a Ubuntu Live CD

- by Trevor Bekolay

If you can’t log in even after trying your twelve passwords, or you’ve inherited a computer complete with password-protected profiles, worry not – you don’t have to do a fresh install of Windows. We’ll show you how to change or reset your Windows password from a Ubuntu Live CD. This method works for all of the NT-based version of Windows – anything from Windows 2000 and later, basically. And yes, that includes Windows 7. You’ll need a Ubuntu 9.10 Live CD, or a bootable Ubuntu 9.10 Flash Drive. If you don’t have one, or have forgotten how to boot from the flash drive, check out our article on creating a bootable Ubuntu 9.10 flash drive. The program that lets us manipulate Windows passwords is called chntpw. The steps to install it are different in 32-bit and 64-bit versions of Ubuntu. Installation: 32-bit Open up Synaptic Package Manager by clicking on System at the top of the screen, expanding the Administration section, and clicking on Synaptic Package Manager. chntpw is found in the universe repository. Repositories are a way for Ubuntu to group software together so that users are able to choose if they want to use only completely open source software maintained by Ubuntu developers, or branch out and use software with different licenses and maintainers. To enable software from the universe repository, click on Settings > Repositories in the Synaptic window. Add a checkmark beside the box labeled “Community-maintained Open Source software (universe)” and then click close. When you change the repositories you are selecting software from, you have to reload the list of available software. In the main Synaptic window, click on the Reload button. The software lists will be downloaded. Once downloaded, Synaptic must rebuild its search index. The label over the text field by the Search button will read “Rebuilding search index.” When it reads “Quick search,” type chntpw in the text field. The package will show up in the list. Click on the checkbox near the chntpw name. Click on Mark for Installation. chntpw won’t actually be installed until you apply the changes you’ve made, so click on the Apply button in the Synaptic window now. You will be prompted to accept the changes. Click Apply. The changes should be applied quickly. When they’re done, click Close. chntpw is now installed! You can close Synaptic Package Manager. Skip to the section titled Using chntpw to reset your password. Installation: 64-bit The version of chntpw available in Ubuntu’s universe repository will not work properly on a 64-bit machine. Fortunately, a patched version exists in Debian’s Unstable branch, so let’s download it from there and install it manually. Open Firefox. Whether it’s your preferred browser or not, it’s very readily accessible in the Ubuntu Live CD environment, so it will be the easiest to use. There’s a shortcut to Firefox in the top panel. Navigate to http://packages.debian.org/sid/amd64/chntpw/download and download the latest version of chntpw for 64-bit machines. Note: In most cases it would be best to add the Debian Unstable branch to a package manager, but since the Live CD environment will revert to its original state once you reboot, it’ll be faster to just download the .deb file. Save the .deb file to the default location. You can close Firefox if desired. Open a terminal window by clicking on Applications at the top-left of the screen, expanding the Accessories folder, and clicking on Terminal. In the terminal window, enter the following text, hitting enter after each line: cd Downloadssudo dpkg –i chntpw* chntpw will now be installed. Using chntpw to reset your password Before running chntpw, you will have to mount the hard drive that contains your Windows installation. In most cases, Ubuntu 9.10 makes this simple. Click on Places at the top-left of the screen. If your Windows drive is easily identifiable – usually by its size – then left click on it. If it is not obvious, then click on Computer and check out each hard drive until you find the correct one. The correct hard drive will have the WINDOWS folder in it. When you find it, make a note of the drive’s label that appears in the menu bar of the file browser. If you don’t already have one open, start a terminal window by going to Applications > Accessories > Terminal. In the terminal window, enter the commands cd /medials pressing enter after each line. You should see one or more strings of text appear; one of those strings should correspond with the string that appeared in the title bar of the file browser earlier. Change to that directory by entering the command cd <hard drive label> Since the hard drive label will be very annoying to type in, you can use a shortcut by typing in the first few letters or numbers of the drive label (capitalization matters) and pressing the Tab key. It will automatically complete the rest of the string (if those first few letters or numbers are unique). We want to switch to a certain Windows directory. Enter the command: cd WINDOWS/system32/config/ Again, you can use tab-completion to speed up entering this command. To change or reset the administrator password, enter: sudo chntpw SAM SAM is the file that contains your Windows registry. You will see some text appear, including a list of all of the users on your system. At the bottom of the terminal window, you should see a prompt that begins with “User Edit Menu:” and offers four choices. We recommend that you clear the password to blank (you can always set a new password in Windows once you log in). To do this, enter “1” and then “y” to confirm. If you would like to change the password instead, enter “2”, then your desired password, and finally “y” to confirm. If you would like to reset or change the password of a user other than the administrator, enter: sudo chntpw –u <username> SAM From here, you can follow the same steps as before: enter “1” to reset the password to blank, or “2” to change it to a value you provide. And that’s it! Conclusion chntpw is a very useful utility provided for free by the open source community. It may make you think twice about how secure the Windows login system is, but knowing how to use chntpw can save your tail if your memory fails you two or eight times! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDChange Your Forgotten Windows Password with the Linux System Rescue CDHow to Create and Use a Password Reset Disk in Windows Vista & Windows 7Reset Your Forgotten Password the Easy Way Using the Ultimate Boot CD for WindowsHow to install Spotify in Ubuntu 9.10 using Wine TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

Read the article

South Florida Code Camp 2010 – VI – 2010-02-27

- by Dave Noderer

Catching up after our sixth code camp here in the Ft Lauderdale, FL area. Website at: http://www.fladotnet.com/codecamp. For the 5th time, DeVry University hosted the event which makes everything else really easy! Statistics from 2010 South Florida Code Camp: 848 registered (we use Microsoft Group Events) ~ 600 attended (516 took name badges) 64 speakers (including speaker idol) 72 sessions 12 parallel tracks Food 400 waters 600 sodas 900 cups of coffee (it was cold!) 200 pounds of ice 200 pizza's 10 large salad trays 900 mouse pads Photos on facebook Dave Noderer: http://www.facebook.com/home.php#!/album.php?aid=190812&id=693530361 Joe Healy: http://www.facebook.com/devfish?ref=mf#!/album.php?aid=202787&id=720054950 Will Strohl:http://www.facebook.com/home.php#!/album.php?aid=2045553&id=1046966128&ref=mf Veronica Gonzalez: http://www.facebook.com/home.php#!/album.php?aid=150954&id=672439484 Florida Speaker Idol One of the sessions at code camp was the South Florida Regional speaker idol competition. After user group level competitions there are five competitors. I acted as MC and score keeper while Ed Hill, Bob O’Connell, John Dunagan and Shervin Shakibi were judges. This statewide competition is being run by Roy Lawsen in Lakeland and the winner, Jeff Truman from Naples will move on to the state finals to be held at the Orlando Code Camp on 3/27/2010: http://www.orlandocodecamp.com/. Each speaker has 10 minutes. The participants were: Alex Koval Jeff Truman Jared Nielsen Chris Catto Venkat Narayanasamy They all did a great job and I’m working with each to make sure they don’t stop there and start speaking at meetings. Thanks to everyone involved! Volunteers As always events like this don’t happen without a lot of help! The key people were: Ed Hill, Bob O’Connell – DeVry For the months leading up to the event, Ed collects all of the swag, books, etc and stores them. He holds meeting with various DeVry departments to coordinate the day, he works with the students in the days before code camp to stuff bags, print signs, arrange tables and visit BJ’s for our supplies (I go and pay but have a small car!). And of course the day of the event he is there at 5:30 am!! We took two SUV’s to BJ’s, i was really worried that the 36 cases of water were going to break his rear axle! He also helps with the students and works very hard before and after the event. Rainer Haberman – Speakers and Volunteer of the Year Rainer has helped over the past couple of years but this time he took full control of arranging the tracks. I did some preliminary work solicitation speakers but he took over all communications after that. We have tried various organizations around speakers, chair per track, central team but having someone paying attention to the details is definitely the way to go! This was the first year I did not have to jump in at the last minute and re-arrange everything. There were lots of kudo’s from the speakers too saying they felt it was more organized than they have experienced in the past from any code camp. Thanks Rainer! Ray Alamonte – Book Swap We saw the idea of a book swap from the Alabama Code Camp and thought we would give it a try. Ray jumped in and took control. The idea was to get people to bring their old technical books to swap or for others to buy. You got a ticket for each book you brought that you could then turn in to buy another book. If you did not have a ticket you could buy a book for $1. Net proceeds were $153 which I rounded up and donated to the Red Cross. There is plenty going on in Haiti and Chile! I don’t think we really got a count of how many books came in. I many cases the books barely hit the table before being picked up again. At the end we were left with a dozen books which we donated to the DeVry library. A great success we will definitely do again! Jace Weiss / Ratchelen Hut – Coffee and Snacks Wow, this was an eye opener. In past years a few of us would struggle to give some attention to coffee, snacks, etc. But it was always tenuous and always ended up running out of coffee. In the past we have tried buying Dunkin Donuts coffee, renting urns, borrowing urns, etc. This year I actually purchased 2 – 100 cup Westbend commercial brewers plus a couple of small urns (30 and 60 cup we used for decaf). We got them both started early (although i forgot to push the on button on one!) and primed it with 10 boxes of Joe from Dunkin. then Jace and Rachelen took over.. once a batch was brewed they would refill the boxes, keep the area clean and at one point were filling cups. We never ran out of coffee and served a few hundred more than last year. We did look but next year I’ll get a large insulated (like gatorade) dispensing container. It all went very smoothly and having help focused on that one area was a big win. Thanks Jace and Rachelen! Ken & Shirley Golding / Roberta Barbosa – Registration Ken & Shirley showed up and took over registration. This year we printed small name tags for everyone registered which was great because it is much easier to remember someone’s name when they are labeled! In any case it went the smoothest it has ever gone. All three were actively pulling people through the registration, answering questions, directing them to bags and information very quickly. I did not see that there was too big a line at any time. Thanks!! Scott Katarincic / Vishal Shukla – Website For the 3rd?? year in a row, Scott was in charge of the website starting in August or September when I start on code camp. He handles all the requests, makes changes to the site and admin. I think two years ago he wrote all the backend administration and tunes it and the website a bit but things are pretty stable. The only thing I do is put up the sponsors. It is a big pressure off of me!! Thanks Scott! Vishal jumped into the web end this year and created a new Silverlight agenda page to replace the old ajax page. We will continue to enhance this but it is definitely a good step forward! Thanks! Alex Funkhouser – T-shirts/Mouse pads/tables/sponsors Alex helps in many areas. He helps me bring in sponsors and handles all the logistics for t-shirts, sponsor tables and this year the mouse pads. He is also a key person to help promote the event as well not to mention the after after party which I did not attend and don’t want to know much about! Students There were a number of student volunteers but don’t have all of their names. But thanks to them, they stuffed bags, patrolled pizza and helped with moving things around. Sponsors We had a bunch of great sponsors which allowed us to feed people and give a way a lot of great swag. Our major sponsors of DeVry, Microsoft (both DPE and UGSS), Infragistics, Telerik, SQL Share (End to End, SQL Saturdays), and Interclick are very much appreciated. The other sponsors Applied Innovations (also supply code camp hosting), Ultimate Software (a great local SW company), Linxter (reliable cloud messaging we are lucky to have here!), Mediascend (a media startup), SoftwareFX (another local SW company we are happy to have back participating in CC), CozyRoc (if you do SSIS, check them out), Arrow Design (local DNN and Silverlight experts),Boxes and Arrows (a local SW consulting company) and Robert Half. One thing we did this year besides a t-shirt was a mouse pad. I like it because it will be around for a long time on many desks. After much investigation and years of using mouse pad’s I’ve determined that the 1/8” fabric top is the best and that is what we got! So now I get a break for a few months before starting again!

Read the article

What is SharePoint Out of the Box?

- by Bil Simser

It’s always fun in the blog-o-sphere and SharePoint bloggers always keep the pot boiling. Bjorn Furuknap recently posted a blog entry titled Why Out-of-the-Box Makes No Sense in SharePoint, quickly followed up by a rebuttal by Marc Anderson on his blog. Okay, now that we have all the players and the stage what’s the big deal? Bjorn started his post saying that you don’t use “out-of-the-box” (OOTB) SharePoint because it makes no sense. I have to disagree with his premise because what he calls OOTB is basically installing SharePoint and admiring it, but not using it. In his post he lays claim that modifying say the OOTB contacts list by removing (or I suppose adding) a column, now puts you in a situation where you’re no longer using the OOTB functionality. Really? Side note. Dear Internet, please stop comparing building software to building houses. Or comparing software architecture to building architecture. Or comparing web sites to making dinner. Are you trying to dumb down something so the general masses understand it? Comparing a technical skill to a construction operation isn’t the way to do this. Last time I checked, most people don’t know how to build houses and last time I checked people reading technical SharePoint blogs are generally technical people that understand the terms you use. Putting metaphors around software development to make it easy to understand is detrimental to the goal. </rant> Okay, where were we? Right, adding columns to lists means you are no longer using the OOTB functionality. Yeah, I still don’t get it. Another statement Bjorn makes is that using the OOTB functionality kills the flexibility SharePoint has in creating exactly what you want. IMHO this really flies in the absolute face of *where* SharePoint *really* shines. For the past year or so I’ve been leaning more and more towards OOTB solutions over custom development for the simple reason that its expensive to maintain systems and code and assets. SharePoint has enabled me to do this simply by providing the tools where I can give users what they need without cracking open up Visual Studio. This might be the fact that my day job is with a regulated company and there’s more scrutiny with spending money on anything new, but frankly that should be the position of any responsible developer, architect, manager, or PM. Do you really want to throw money away because some developer tells you that you need a custom web part when perhaps with some creative thinking or expectation setting with customers you can meet the need with what you already have. The way I read Bjorn’s terminology of “out-of-the-box” is install the software and tell people to go to a website and admire the OOTB system, but don’t change it! For those that know things like WordPress, DotNetNuke, SubText, Drupal or any of those content management/blogging systems, its akin to installing the software and setting up the “Hello World” blog post or page, then staring at it like it’s useful. “Yes, we are using WordPress!”. Then not adding a new post, creating a new category, or adding an About page. Perhaps I’m wrong in my interpretation. This leads us to what is OOTB SharePoint? To many people I’ve talked to the last few hours on twitter, email, etc. it is *not* just installing software but actually using it as it was fit for purpose. What’s the purpose of SharePoint then? It has many purposes, but using the OOTB templates Microsoft has given you the ability to collaborate on projects, author/share/publish documents, create pages, track items/contacts/tasks/etc. in a multi-user web based interface, and so on. Microsoft has pretty clear definitions of these different levels of SharePoint we’re talking about and I think it’s important for everyone to know what they are and what they mean. Personalization and Administration To me, this is the OOTB experience. You install the product and then are able to do things like create new lists, sites, edit and personalize pages, create new views, etc. Basically use the platform services available to you with Windows SharePoint Services (or SharePoint Foundation in 2010) to your full advantage. No code, no special tools needed, and very little user training required. Could you take someone who has never done anything in a website or piece of software and unleash them onto a site? Probably not. However I would argue that anyone who’s configured the Outlook reading layout or applied styles to a Word document probably won’t have too much difficulty in using SharePoint OUT OF THE BOX. Customization Here’s where things might get a bit murky but to me this is where you start looking at HTML/ASPX page code through SharePoint Designer, using jQuery scripts and plugging them into Web Part Pages via a Content Editor Web Part, and generally enhancing the site. The JavaScript debate might kick in here claiming it’s no different than C#, and frankly you can totally screw a site up with jQuery on a CEWP just as easily as you can with a C# delegate control deployed to the server file system. However (again, my blog, my opinion) the customization label comes in when I need to access the server (for example creating a custom theme) or have some kind of net-new element I add to the system that wasn’t there OOTB. It’s not content (like a new list or site), it’s code and does something functional. Development Here’s were the propeller hats come on and we’re talking algorithms and unit tests and compilers oh my. Software is deployed to the server, people are writing solutions after some kind of training (perhaps), there might be some specialized tools they use to craft and deploy the solutions, there’s the possibility of exceptions being thrown, etc. There are a lot of definitions here and just like customization it might get murky (do you let non-developers build solutions using development, i.e. jQuery/C#?). In my experience, it’s much more cost effective keeping solutions under the first two umbrellas than leaping into the third one. Arguably you could say that you can’t build useful solutions without *some* kind of code (even just some simple jQuery). I think you can get a *lot* of value just from using the OOTB experience and I don’t think you’re constraining your users that much. I’m not saying Marc or Bjorn are wrong. Like Obi-Wan stated, they’re both correct “from a certain point of view”. To me, SharePoint Out of the Box makes total sense and should not be dismissed. I just don’t agree with the premise that Bjorn is basing his statements on but that’s just my opinion and his is different and never the twain shall meet.

Read the article

WWDC and Tech Ed: A Tale of Two DevCons

- by andrewbrust

Next week marks the first full week of June. Summer will feel in full swing and it will be a pretty big season for technology. In seeming acknowledgement of that very fact, both Apple and Microsoft will be holding large developers conferences starting Monday. Apple will hold its annual Worldwide Developers Conference (WWDC) in lovely San Francisco and Microsoft will hold its Tech Ed conference in muggy, oil-laden yet soulful New Orleans. A brief survey of each show reveals much about the differences in each company’s offerings, strategy, and approach to customers and partners. In the interest of full disclosure, I must explain that I will be speaking at Microsoft’s Tech Ed show, and have done so, on and off, since 2003. I have never been to an Apple conference and, as readers of this blog may know, I acquired my first ever Apple product 2 months ago when I bought an iPad on the day of that product’s launch. I think I have keen insights into Microsoft’s conference. My ability to comment on Apple’s event ranges somewhere between backseat driver and naive observer. Just so you know. Although both shows cater to their respective company’s developers, there are a number of differences in the events’ purposes and content approaches. First off, let’s consider each show as a news and PR vehicle. WWDC will feature Steve Jobs’ keynote address and most likely will be where Apple officially reveals details of its 4th-generation iPhone. Jobs will likely also provide deep background information on the corresponding iPhone OS release. These presumed announcements will make the show a magnet for the tech press and tech blogger elite. Apple’s customers will be interested too, especially since the iPhone OS release will likely be made available to owners of existing iPhone, iPod Touch and iPad devices. Tech Ed, on the other hand, may not be especially newsworthy at all. The keynote address will be given by Bob Muglia, who is President of the company’s Server and Tools Division, and he’ll likely be reviewing things more than previewing them. That’s because the company has, in the last 6-8 months, already released new versions of a majority of its products, including Windows, Office, SharePoint, SQL Server, Exchange, its Azure cloud platform, its .NET software development layer, its Silverlight Rich Internet Application (RIA) technology and its Visual Studio developer suite. Redmond’s product pipeline has functioned more like a firehose of late, and the company has a ton of work to do to get developers up to speed on everything that’s new. I know I keep saying “developers,” but in Tech Ed’s case, that’s not really accurate. In North America, Tech Ed caters to both developers and IT pros (i.e. technologists who work with physical IT infrastructure, as well as security and administration of the server software that runs on it). This pairing has, since its inception, struck some as anomalous and others, including many exhibitors, as very smart. Certainly, it means Tech Ed ends up being a confab for virtually all professionals in Microsoft’s ecosystem. And this year, Microsoft’s Business Intelligence (BI) conference will be co-located with Tech Ed, further enhancing that fusion effect. Clearly then, Microsoft’s show will focus on education, as its name assures us. Apple’s will serve as both a press event and an opportunity to get its own App Store developer channel synced up with its newest technology advances. For example, we already know that iPhone OS 4.0 will provide for a limited multitasking capability; that will only work well if people know how to code to it in a capable way. Apple also told us its iAd advertising platform will be part of the new OS, and Steve Jobs insists that’s to provide a revenue opportunity for developers. This too, then, needs to be explicated and soaked up buy the faithful. A look at each show’s breakout session lineup provides some interesting takeaways. WWDC will have very few Mac-specific sessions on offer, and virtually no sessions that at are IT- or “Enterprise-“ related. It’s all about the phone, music players and tablets. However, WWDC will have plenty of low-level, hardcore tech coverage of such things as Advanced Memory Analysis and Creating Secure Applications, as well as lots of rich media-related content like Core Animation and Game Design and Development. Beyond Apple’s proprietary platform, WWDC will also feature an array of sessions on HTML 5 and other Web standards. In all, WWDC offers over 100 technical sessions and hands-on labs. What about Tech Ed’s editorial content? Like the target audience, it really runs the gamut. The show has 21 tracks (versus WWDC’s 5) and more than 745 “learning opportunities” which include breakout sessions, demo stations, hands-on labs and BIrds of a Feather discussion sessions. Topics range from Architecture talks like Patterns of Parallel Programming to cloud computing talks like Building High Capacity Compute Applications with Windows Azure to IT-focused topics like Virtualization of Microsoft SharePoint 2010 Farm Architecture. I also count 19 sessions on Windows Phone 7. Unfortunately, with regard to Web standards and HTML 5, only a few sessions are offered, all of them specific to Internet Explorer. All-in-all, Apple’s show looks more exciting and “sexier” than Tech Ed. Microsoft’s show seems a lot more enterprise-focused than WWDC. This is, of course, well in sync with each company’s approach and products. Microsoft’s content is much wider ranging and bests WWDC in sheer volume of sessions and labs. I suppose some might argue that less is more; others that Apple’s consumer-focused offerings simply don’t provide for the same depth of coverage to a business audience. Microsoft has a serious focus on the cloud and a paucity of coverage on client-side Web standards; Apple has virtually no cloud offering at all. Again, this reflects each tech titan’s go-to-market strategy. My own take is that employees of each company should attend the other’s event. The amount of mutual exclusivity in content may make sense in terms of corporate philosophy, but the reality is that each company could stand to diversify into the other’s territory, at least somewhat. My own talk at Tech Ed will focus on competitive analysis around Microsoft’s BI products. Apple does not today figure into that analysis. Maybe one day it will.

Read the article

PPTP connection disconnect

- by Vladimir Franciz S. Blando

My pptp connection wont stay connected, it will disconnect in less than a minute here are some relevant log entries May 31 13:32:31 localhost NetworkManager[931]: <info> Starting VPN service 'pptp'... May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 15216 May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' appeared; activating connections May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: init (1) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: starting (3) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (Connect) reply received. May 31 13:32:31 localhost pppd[15221]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. May 31 13:32:31 localhost pppd[15221]: pppd 2.4.5 started by root, uid 0 May 31 13:32:31 localhost pptp[15224]: nm-pptp-service-15216 log[main:pptp.c:314]: The synchronous pptp option is NOT activated May 31 13:32:31 localhost pppd[15221]: Using interface ppp0 May 31 13:32:31 localhost pppd[15221]: Connect: ppp0 <--> /dev/pts/5 May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. May 31 13:32:33 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1536). May 31 13:32:37 localhost pppd[15221]: CHAP authentication succeeded May 31 13:32:37 localhost kernel: [54007.078553] PPP MPPE Compression module registered May 31 13:32:40 localhost pppd[15221]: MPPE 128-bit stateless compression enabled May 31 13:32:42 localhost pppd[15221]: local IP address 10.100.0.52 May 31 13:32:42 localhost pppd[15221]: remote IP address 10.100.0.1 May 31 13:32:42 localhost pppd[15221]: primary DNS address 4.2.2.1 May 31 13:32:42 localhost pppd[15221]: secondary DNS address 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) reply received. May 31 13:32:42 localhost NetworkManager[931]: <info> VPN Gateway: 103.28.219.2 May 31 13:32:42 localhost NetworkManager[931]: <info> Tunnel Device: ppp0 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Address: 10.100.0.52 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Prefix: 32 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Point-to-Point Address: 10.100.0.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Maximum Segment Size (MSS): 0 May 31 13:32:42 localhost NetworkManager[931]: <info> Forbid Default Route: no May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 4.2.2.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> DNS Domain: '(none)' May 31 13:32:43 localhost dnsmasq[2127]: exiting on receipt of SIGTERM May 31 13:32:43 localhost NetworkManager[931]: <info> DNS: starting dnsmasq... May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dnsmasq[15290]: error at line 2 of /var/run/nm-dns-dnsmasq.conf May 31 13:32:43 localhost dnsmasq[15290]: FAILED to start up May 31 13:32:43 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) complete. May 31 13:32:43 localhost NetworkManager[931]: <info> Policy set 'Dynalabs' (ppp0) as default for IPv4 routing and DNS. May 31 13:32:43 localhost NetworkManager[931]: <info> VPN plugin state changed: started (4) May 31 13:32:43 localhost NetworkManager[931]: <warn> dnsmasq exited with error: Configuration problem (1) May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dbus[872]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) May 31 13:32:43 localhost dbus[872]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' May 31 13:33:00 localhost ntpdate[15370]: step time server 91.189.94.4 offset -1.110301 sec May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd6d6 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x93aa May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xcc83 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2031 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x13d4 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x5b11 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x414b May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f5f May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe9ff May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8e20 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8f0 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf166 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x36e6 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xdd19 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xda26 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xac5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x53a5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x507e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1dc5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf87b May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f27 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd10c May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66ef May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa294 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb15 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x52a2 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd863 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8a96 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xde19 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9763 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb23 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x83ca May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x964e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe8ae May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf614 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9b1 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf086 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbff4 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66c5 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe42 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf295 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x86fe May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3bc1 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbaad May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x88b5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd7a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x30d5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2d8f May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3933 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8d42 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x4b4 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa205 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x7cc5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1b6a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf004 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x21b6 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x51eb

Read the article

Create PDF document using iTextSharp in ASP.Net 4.0 and MemoryMappedFile

- by sreejukg

In this article I am going to demonstrate how ASP.Net developers can programmatically create PDF documents using iTextSharp. iTextSharp is a software component, that allows developers to programmatically create or manipulate PDF documents. Also this article discusses the process of creating in-memory file, read/write data from/to the in-memory file utilizing the new feature MemoryMappedFile. I have a database of users, where I need to send a notice to all my users as a PDF document. The sending mail part of it is not covered in this article. The PDF document will contain the company letter head, to make it more official. I have a list of users stored in a database table named “tblusers”. For each user I need to send customized message addressed to them personally. The database structure for the users is give below. id Title Full Name 1 Mr. Sreeju Nair K. G. 2 Dr. Alberto Mathews 3 Prof. Venketachalam Now I am going to generate the pdf document that contains some message to the user, in the following format. Dear <Title> <FullName>, The message for the user. Regards, Administrator Also I have an image, bg.jpg that contains the background for the document generated. I have created .Net 4.0 empty web application project named “iTextSharpSample”. First thing I need to do is to download the iTextSharp dll from the source forge. You can find the url for the download here. http://sourceforge.net/projects/itextsharp/files/ I have extracted the Zip file and added the itextsharp.dll as a reference to my project. Also I have added a web form named default.aspx to my project. After doing all this, the solution explorer have the following view. In the default.aspx page, I inserted one grid view and associated it with a SQL Data source control that bind data from tblusers. I have added a button column in the grid view with text “generate pdf”. The output of the page in the browser is as follows. Now I am going to create a pdf document when the user clicking on the Generate PDF button. As I mentioned before, I am going to work with the file in memory, I am not going to create a file in the disk. I added an event handler for button by specifying onrowcommand event handler. My gridview source looks like <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" Width="481px" CellPadding="4" ForeColor="#333333" GridLines="None" onrowcommand="Generate_PDF" > ………………………………………………………………………….. ………………………………………………………………………….. </asp:GridView> In the code behind, I wrote the corresponding event handler. protected void Generate_PDF(object sender, GridViewCommandEventArgs e) { // The button click event handler code. // I am going to explain the code for this section in the remaining part of the article } The Generate_PDF method is straight forward, It get the title, fullname and message to some variables, then create the pdf using these variables. The code for getting data from the grid view is as follows // get the row index stored in the CommandArgument property int index = Convert.ToInt32(e.CommandArgument); // get the GridViewRow where the command is raised GridViewRow selectedRow = ((GridView)e.CommandSource).Rows[index]; string title = selectedRow.Cells[1].Text; string fullname = selectedRow.Cells[2].Text; string msg = @"There are some changes in the company policy, due to this matter you need to submit your latest address to us. Please update your contact details / personnal details by visiting the member area of the website. ................................... "; since I don’t want to save the file in the disk, I am going the new feature introduced in .Net framework 4, called Memory-Mapped Files. Using Memory-Mapped mapped file, you can created non-persisted memory mapped files, that are not associated with a file in a disk. So I am going to create a temporary file in memory, add the pdf content to it, then write it to the output stream. To read more about MemoryMappedFile, read this msdn article http://msdn.microsoft.com/en-us/library/dd997372.aspx The below portion of the code using MemoryMappedFile object to create a test pdf document in memory and perform read/write operation on file. The CreateViewStream() object will give you a stream that can be used to read or write data to/from file. The code is very straight forward and I included comment so that you can understand the code. using (MemoryMappedFile mmf = MemoryMappedFile.CreateNew("test1.pdf", 1000000)) { // Create a new pdf document object using the constructor. The parameters passed are document size, left margin, right margin, top margin and bottom margin. iTextSharp.text.Document d = new iTextSharp.text.Document(PageSize.A4, 72,72,172,72); //get an instance of the memory mapped file to stream object so that user can write to this using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { // associate the document to the stream. PdfWriter.GetInstance(d, stream); /* add an image as bg*/ iTextSharp.text.Image jpg = iTextSharp.text.Image.GetInstance(Server.MapPath("Image/bg.png")); jpg.Alignment = iTextSharp.text.Image.UNDERLYING; jpg.SetAbsolutePosition(0, 0); //this is the size of my background letter head image. the size is in points. this will fit to A4 size document. jpg.ScaleToFit(595, 842); d.Open(); d.Add(jpg); d.Add(new Paragraph(String.Format("Dear {0} {1},", title, fullname))); d.Add(new Paragraph("\n")); d.Add(new Paragraph(msg)); d.Add(new Paragraph("\n")); d.Add(new Paragraph(String.Format("Administrator"))); d.Close(); } //read the file data byte[] b; using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { BinaryReader rdr = new BinaryReader(stream); b = new byte[mmf.CreateViewStream().Length]; rdr.Read(b, 0, (int)mmf.CreateViewStream().Length); } Response.Clear(); Response.ContentType = "Application/pdf"; Response.BinaryWrite(b); Response.End(); } Press ctrl + f5 to run the application. First I got the user list. Click on the generate pdf icon. The created looks as follows. Summary: Creating pdf document using iTextSharp is easy. You will get lot of information while surfing the www. Some useful resources and references are mentioned below http://itextsharp.com/ http://www.mikesdotnetting.com/Article/82/iTextSharp-Adding-Text-with-Chunks-Phrases-and-Paragraphs http://somewebguy.wordpress.com/2009/05/08/itextsharp-simplify-your-html-to-pdf-creation/ Hope you enjoyed the article.

Read the article

Company Review: Google Products

Google, Inc offers an array of products and services to all of its end-users. However their search capabilities are the foundation for Google’s current success and their primary business focus. Currently, Google offers over twenty different search applications that allow users to search the internet for books, maps, videos, images, products and much more. Their product decisions have allowed users demands to be met while focusing on the free based model. This allows users to access Google data free of charge and indirectly gives Google a strong competitive advantage of other competitors along with the accuracy of the search results. According to Google, Inc, they offer the following types of searching capabilities: Alerts Get email updates on the topics of your choice Blog Search Find blogs on your favorite topics Books Search the full text of books Custom Search Create a customized search experience for your community Desktop Search and personalize your computer Dictionary Search for definitions of words and phrases Directory Search the web, organized by topic or category Earth Explore the world from your computer Finance Business info, news and interactive charts GOOG-411 Find and connect for free with businesses from your phone Images Search for images on the web Maps View maps and directions News Search thousands of news stories Patent Search Search the full text of US Patents Product Search Search for stuff to buy Scholar Search scholarly papers Toolbar Add a search box to your browser Trends Explore past and present search trends Videos Search for videos on the web Web Search Search billions of web pages Web Search Features Find movies, music, stocks, books and more mapping Google’s free based business model is only one way it differentiates itself from its competition. There is also a strong focus on the accuracy of search results and the speed in which they are returned to the end-user. Quality function deployment (QFD) is a structured method used to help connect user needs to the design features of a project proposed to address those needs. This method is particularly useful in accounting for needs that are not easily articulated or precisely defined according to the U. S. Department of Transportation Federal Highway Administration. Due to the fact that QFD is so customer driven Google is always in a constant state of change in attempt to reengineer its search algorithms, and other dependant systems so that end-users requirements are constantly being met. Value engineering is a key example of this, Google is constantly trying to improve all aspects of its products, improve system maintainability, and system interoperability. Bridgefield Group defines value engineering as an organized methodology that identifies and selects the lowest lifecycle cost options in design, materials and processes that achieves the desired level of performance, reliability and customer satisfaction. In addition, it seeks to remove unnecessary costs in the above areas and is often a joint effort with cross-functional internal teams and relevant suppliers. Common issues that appear when developing large scale systems like Google’s search applications include modular design of a product and/or service and providing accurate value analysis. A design approach that adheres to four fundamental tenets of cohesiveness, encapsulation, self-containment, and high binding to design a system component as an independently operable unit subject to change is how the Open System Joint Task Force defines modular design. More specifically M. S. Schmaltz defines modular software design as having a large collection of statements strung together in one partition of in-line code; we segment or divide the statements into logical groups called modules. Each module performs one or two tasks, and then passes control to another module. By breaking up the code into "bite-sized chunks", so to speak, we are able to better control the flow of data and control. This is especially true in large software systems. Value analysis is a process to evaluate products and services based on effectiveness, safety, and cost. Value analysis involves assessing the quality as well as the cost of a product or service as defined by the Healthcare Financial Management Association. “Operations Management deals with the design and management of products, processes, services and supply chains. It considers the acquisition, development, and utilization of resources that firms need to deliver the goods and services their clients want.” (MIT,2010) Google, Inc encourages an open environment between all employees, also known as Googlers. This is reinforced by a cross-section team or cross-functional teams comprised from multiple departments assigned to every project so that every department like marketing, finance, and quality assurance has input on every project. In addition, Google is known for their openness to new ideas regardless of the status or seniority of an employee. In fact, Google allows for 20% of an employee’s time can be devoted to developing new ideas and/or pet projects. HumTech.com defines a cross-functional team as a collection of people with varied levels of skills and experience brought together to accomplish a task. As the name implies, Cross-Functional Team members come from different organizational units. Cross-Functional Teams may be permanent or ad hoc. Google’s search application product strategy primarily focuses on mass customization. This is allows Google to create a base search application and allows results to be returned to the end-users quickly based on specific parameters and search settings. In addition, they also store the data that is returned in case other desire the same results based on other end-users supplying the same customized settings. This allows Google to appear to render search results in virtually real-time to the user while allowing for complete customization of the searching criteria. Greg Vogl, a professor at Uganda Martyrs University, defines mass customization as when a business gives its customers the opportunity to tailor its products or services to the customer's specifications. The IT staff at Google play a key role in ensuring that the search application’s product strategy is maintained simply because the IT staff designs, develops, and maintains all of their proprietary applications. In fact, they also maintain all network infrastructure to ensure that it is available to all end-users. References: http://www.google.com/intl/en/options/ http://ops.fhwa.dot.gov/freight/publications/ftat_user_guide/sec5.htm http://www.bridgefieldgroup.com/bridgefieldgroup/glos9.htm#V http://www.acq.osd.mil/osjtf/termsdef.html http://www.cise.ufl.edu/~mssz/Pascal-CGS2462/prog-dsn.html http://www.hfma.org/publications/business_caring_newsletter/exclusives/Supply+and+Inventory+Terms+Defined.htm http://mitsloan.mit.edu/omg/om-definition.php http://www.humtech.com/opm/grtl/ols/ols3.cfm http://www.gregvogl.net/courses/mis1/glossary.htm

Read the article

Top tweets SOA Partner Community – October 2012

- by JuergenKress

Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community Deploying Fusion Order Demo on 11.1.1.6 by Antony Reynolds http://wp.me/p10C8u-vA leonsmiers ?Cant wait to test it >> 't waiRT @OracleSOA: Case Management patterns, session coverage from #OOW #OracleBPM #ACM #BPM http://bit.ly/OdcZL6 Danilo Schmiedel Bye bye San Francisco. #oow was a great conference in a wonderful city! Thanks! @soacommunity pic.twitter.com/lcYSe9xC OPITZ CONSULTING ?The Journey towards #Oracle #BPM @OpenWorld 2012 - Slides by @t_winterberg & H. Normann: http://ow.ly/edkWE #oow demed Full house at the SOA Customer Advisory Board! #oow12 http://instagr.am/p/QX9B8eLMLS/ Danilo Schmiedel "@whitehorsesnl: Had some great talks with the BPM guys at the DEMOgrounds. It is one of the best things at #oow" -> I agree!! @soacommunity Mark Simpson ?Fusion Middleware Global Innovation Awards: nice to pick up a soa and bpm with our customer. #oow Mark Simpson ?RT @SOASimone: #oraclesoa #oow hands on lab fully booked pic.twitter.com/pwI94Ew7 <--quick, provision some more compute power on the cloud! Oracle SOA ?Join us for BPM and Analytics: Process Dashboards. BAM, and Intelligent OptimizationMoscone South - 308#OracleBPM #OOW Oracle SOA ?Real-time public safety demo! License plate recognition and processing in London via Oracle Event Processing. #oow pic.twitter.com/WufesDBq Marc ?Nice session on customer success stories on #SOA11g on with @SOASimone Pro and cons and architectural overview. #oow pic.twitter.com/bzuhsujm Lucas Jellema Full length Keynote on Middleware #oow : http://medianetwork.oracle.com/video/player/1873556035001 … #oow_amis OracleBlogs ?Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers? http://ow.ly/2stVQ0 OracleBlogs ?Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications http://ow.ly/2suhzf Ronald Luttikhuizen ?VENNSTER BLOG | Presentations at OpenWorld 2012 | http://blog.vennster.nl/2012/10/presentations-at-openworld-2012.html … Andrejus Baranovskis @dschmied @soacommunity next OOW for sure, and may be SOA community event ! @soacommunity Danilo Schmiedel ?@andrejusb Thanks Andrejus - I really enjoyed having a session with you at #oow. When is next time :-) ? @soacommunity Lionel Dubreuil ?@soacommunity #oow12 Today-1:15pm-Marriott Marquis Salon 7 Jump-starting Integration with Oracle Foundation Pack http://bit.ly/QKKJzF Ronald Luttikhuizen ?Impression from our fault handling session in OSB and SOA Suite from the audience @soacommunity @gschmutz #oow pic.twitter.com/WSg1Z89E Marc Nice session on Oracle Virtual Assembly for #SOA11g, @soacommunity Works with #exalogic but not required SOA Community ?Send your #soacommunity #oow pictures and blog posts @soacommunity or http://www.facebook.com/soacommunity Enjoy OOW ;-) Jon petter hjulstad Oracle BPM- Big leap forward in 11.1.1.7 ! Whitehorses ?Common BPM Use Cases from Oracle #bpm #oow pic.twitter.com/ofOv04EF Whitehorses ?Oracle BPM 11.1.1.7 top new features. Interesting #oow #oowbenelux pic.twitter.com/HY9QN5un SOA Community Industrialized SOA - topic of Business Technology Magazine http://wp.me/p10C8u-vi orclateamsoa ?A-Team Blog #ateam: The curious case of SOA Human tasks' automatic completion http://ow.ly/1mq6YU Simone Geib Look for this sign #oow #oraclesoa pic.twitter.com/MJsPV4PO Lucas Jellema My summary of Larry Ellison's keynote at #oow on the AMIS Blog: http://technology.amis.nl/2012/10/01/oow-2012-larry-ellisons-keynote-announcements-exa-cloud-database/ … #oow_amis gschmutz ?Join my #oow session "Five Cool Use Cases for the Spring Component" to see the power of Spring and SOA Suite combined! Moscone 310 - 3:15 PM Ronald Luttikhuizen Thanks to @soacommunity for great SOA/BPM dinner event yesterday night! #oow pic.twitter.com/v7x3i0DC OracleBlogs ?OSB, Service Callouts and OQL http://ow.ly/2sq6B2 OracleBlogs ?Cloud and On-Premises Applications Integration using Oracle Integration Adapters http://ow.ly/2sqiDy OracleBlogs ?Adapters, SOA Suite and More @Openworld 2012 http://ow.ly/2srdTg Eric Elzinga ?OSB, Service Callouts and OQL - Part 3, http://see.sc/JodzEx #oracleservicebus Donatas Valys interesting articles about soa industrialization to read #soa #industrialization http://it-republik.de/business-technology/bt-magazin-ausgaben/Industrialized-SOA-000516.html … gschmutz ?“@techsymp: 2012 Symposium Presentation Download Page Now Available! 75% of presentations published. http://www.servicetechsymposium.com ” find mine there.. Oracle BPM Customer Experience and BPM – From Efficiency to Engagement #bpm #oraclebpm #processmanagement #socialbpm http://pub.vitrue.com/Tahi SOA Community ?@soacommunity SOA Community Newsletter September 2012 http://wp.me/p10C8u-wa SOA Community again again again.... it is Oracle Open World 2012 http://wp.me/p10C8u-wk OracleBlogs ?SOA Proactive support http://ow.ly/2smrSJ demed ?@gschmutz on NoSQL at @techsymp http://lockerz.com/s/247601661 demed ?Just finished "#BigData and its impact on #SOA" talk @techsymp. Really enjoyed getting out of beaten path. #london #oep http://lockerz.com/s/247636974 OTNArchBeat ?Need help selling SOA to business stakeholders? Give them this free eBook. #soasuite http://pub.vitrue.com/hsQY SOA Community top Tweets SOA Partner Community – September 2012 http://wp.me/p10C8u-vc SOA Community Move Data into the grid for scalable, predictable response times http://wp.me/p10C8u-vv ServiceTechSymposium ?The September issue of the Service Technology Magazine is now published with six new items! Read them at http://www.servicetechmag.com Marc ?Reviewed @Packt_OracleFMW new book on SOA11g administration! Very good ! http://tinyurl.com/8pzd5ww SOA Community ?BPM Solution Catalogue–promote your process templates http://wp.me/p10C8u-vt OTNArchBeat ?BPM ADF Task forms: Checking whether the current user is in a BPM Swimlane | @ChrisKarlChan http://pub.vitrue.com/aPMG OTNArchBeat ?Cloud, automation drive new growth in SOA governance market | @JoeMcKendrick http://pub.vitrue.com/hNPv Simon Haslam ?Looking for "oak style"(!) advanced content but you're a middleware specialist? See #ukoug2012 #middlewaresunday http://2012.ukoug.org/default.asp?p=9355 … Simon Haslam ?The #ukoug2012 agenda is "go, go, go!" (as Murray would say!) http://2012.ukoug.org/agendagrid Germán Gazzoni SOA Spezial II verfügbar – Industralized SOA: Die überarbeitete und ergänzte Neuauflage des SOA Spezial Sonderhe... http://bit.ly/PAWwN9 Oracle SOA ?Flip thru new interactive "Oracle SOA Suite eBook-In the Customers Words" #middleware #soa #oraclesoa http://pub.vitrue.com/NzFZ SOA Community Follow SOA Community on Facebook http://www.facebook.com/soacommunity #soacommunity #opn SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

Read the article

Improving the Industry’s Best Cloud Project Portfolio Management (PPM) Solution – New Release of Instantis EnterpriseTrack

- by Melissa Centurio Lopes

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Yasser Mahmud, Vice President of Product Strategy & Industry Marketing, Oracle Primavera We know that in today’s rapidly changing world, organizations and leaders must adapt to fierce competition, business climate change and customers consistently demanding more for less. And project portfolio management (PPM) initiatives are a key component to help organizations thrive and stand out among competitors. That’s why I’m excited to announce Instantis EnterpriseTrack 8.5. Since Oracle’s acquisition of Instantis late last year, we’ve been busy working to enhance the leading cloud PPM solution. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here’s what’s new: Perform more precise resource planning and management Gain more precise capacity visibility for resource planning and project execution with resource calendars that capture vacation, LOA and part-time resource availability Ensure compliance and governance processes with activity labor cost capitalization Improve project labor cost estimation, tracking and administration with variable resource rates Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Optimize Project Demand Management And Execution Enhance productivity and analysis with project request flexible staffing plan and simplified finance estimation Improve project status communication and execution with estimated time to complete (ETC) in timesheets and projects Achieve audit compliance and governance with field change history for key project and project request fields Enforce proper financial accounting processes with the new strict finance lock/close period option Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Improve Reporting and the User Experience Enhance user productivity and analysis with improved listing pages Improve program reporting with new program filters in listing pages and reports Run large data volume user defined Excel reports with MS Excel 2010 support Accelerate user productivity and satisfaction with an improved user interface for project issues, risks, and scope changes Enjoy faster system response and improved user experience with optimized listing pages, resource planning, and application cache Deliver user self-service training on demand with UPK support And if that wasn’t enough, we’ve also made additional improvements to timesheets, field change history and finance lock/close period. Learn more about Instantis EnterpriseTrack 8.5.

Read the article

Microsoft TechEd 2010 - Day 3 @ Bangalore

- by sathya

Microsoft TechEd 2010 - Day 3 @ Bangalore Sorry for my delayed post on day 3 because I had to travel from Blore to Chennai So I couldnt write for the past two days. On day 3 as usual we had lot of simultaneous tracks on various sessions. This day I choose the Your Data, Our Platform Track. It had sessions on the following 5 topics : Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan Data Recovery / Consistency with CheckDB - by Vinod Kumar M Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam This was one of the superb sessions i have attended. He explained all the concepts in detail with a demo. The important thing in this is there is something called Data-Tier application project which is newly introduced in this VS2010 with which we can manage all our data along with our application inside our VS itself. We can create DB,Tables,Procs,Views etc. here itself and once we deploy it creates a compressed file called .dacpac which stores all the changes in Table Schema,Created procs, etc. on to that single file which reduces our (developer's) effort in preparing the deployment scripts and giving it to the DBA. It also has some policy configurations which can be managed easily by checking some rules like in outlook. For Ex : IF the SQL Server Version > 10 then deploy else dont. This rule specifies that even if we try to deploy on SQL Server DB with version less than 10 It will not do it. And if we deploy some .dacpac to SQL server production db with the option upgrade DB with this dacpac once everything completes successfully it will say success else it rollsback to the prior version. Even if it gets deployed successfully and later @ a point of time you wish to revert it back to the prior version, you can go ahead and delete the existing dacpac version so that it reverts to the older version of the db changes. And for the good questions that were asked in the session T-Shirts were given. SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M This one too was the best session. The speaker Vinod explained everything very much clearly. This was really useful session and you dont believe, as per my knowledge, in the total 3 days in the TechEd except the Keynote, for this session seats were full (House FULL) People were even standing out to attend this session. Such a great one it was. The speaker did a deep dive in to the Query Plan section and showed which actually causes the problem. Its all about the thing that we need to understand about the execution of SQL server Queries. We think in a way and SQL Server never executes in that way. We need to understand that first. He also told about there might be two plans generated for a single query at a point of time because of parallel processors in the system. The Key is here in every query. There is something called Estimated Row Count and Actual Row Count in the query plan. If the estimated row count by SQL server tallies with the actual row count your performance will be awesome. He said some tweaks to achieve the same. After this as usual we had lunch SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan This was more of a DBA's session. Am really sorry I was totally blank and I was not interested to attend this session and walked out to attend Migrating to the cloud by Harish Ranganathan (My favorite Speaker) but unfortunately that was some other persons session. There the speaker was telling about how to configure the connection strings in such a way that we can connect to the SQL Azure platform from our VS and also showed us how to deploy the same in to Windows Azure. In between there were lot of technical problems like laptop hang, user locked and he was switching between systems, also i came in the half so i wasnt able to listen that fully. In between, Since I got an MCTS certification they gave me T-Shirt with the lines 'Iam Certified. Are you?' and they asked me to wear that. If we wear that we might get spotted and they would give us some goodies So on the 3rd day I was wearing that T-Shirt. I got spotted by the person Tarun who was coordinating things about the certification, and he was accompanied with a cameraman and they interviewed me about the certification and I was shown live in the Teched and was seen by 60000 live viewers of the TechEd. I was really happy on that. Data Recovery / Consistency with CheckDB - by Vinod Kumar M This was one of the best sessions too in the TechEd. This guy is really amazing. In front of us he crashed a DB and showed how to recover the same in 6 different ways for different no of failures. Showed about Different types of error msgs like : 823,824,825 msdb..suspect_pages DBCC CheckDB (different parameters to it) I am really waiting for his session to get uploaded live in the Teched Website. Here is his contact info If you wish to connect to him : Twitter : @vinodk_sql Website : www.ExtremeExperts.com Blog : http://blogs.sqlxml.org/vinodkumar Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Pinal Dave is a King in SQL and he is a SQL MVP and he is the owner of SQLAuthority.com He took the session on Spatial Databases from the start. Showed about the different types of Spatial : Geometric and Geographic Geometric : x and y axis its a planar surface Geographic : Spherical surface with 3600 as the maximum which is used to represent the geographic points on the earth and easy to draw maps of different kinds. He had a lot of obstacles during his session like rain coming inside the hall, mic wires got bursted due to rain, Videos off on the display screens. In spite of that he asked the audience to come in the front rows and managed to take a good session without ppts and finally we got the displays on and he was showing demos on the same what he explained orally. That was really a fun filled informative session. He gave some books for the persons who asked good questions and answered well for his questions and I got one too (It was a book on Data Mining - Wrox Publishers) And finally after all these things there was Keynote session for close of the TechEd. and we all assembled in a big hall where Mr.Ashok Soota, a man of age around 70 co-founder of Mindtree was called to give some lecture on his successes. He was explaining about his past and what all companies he switched and for what reasons and what are all his successes and what are all his failures and the learnings of him from his past failures. and his success and failures on his partnerships with the other concern. And there were some questions for him like What is your suggestion on young entrepreneur? How did you learn from past failures? What is reiterating your success? What is your suggestion on partnerships? How to choose partnerships? etc. And they said @ 7.30 Pm there would be a party night, but unfortunately i was not able to attend that because I had to catch my train and before that i had to pack things, so I started @ 7 itself. Thats it about the TechED!!! Stay tuned for further Technology updates.

Read the article

Chock-full of Identity Customers at Oracle OpenWorld

- by Tanu Sood

Oracle Openworld (OOW) 2012 kicks off this coming Sunday. Oracle OpenWorld is known to bring in Oracle customers, organizations big and small, from all over the world. And, Identity Management is no exception. If you are looking to catch up with Oracle Identity Management customers, hear first-hand about their implementation experiences and discuss industry trends, business drivers, solutions and more at OOW, here are some sessions we recommend you attend: Monday, October 1, 2012 CON9405: Trends in Identity Management 10:45 a.m. – 11:45 a.m., Moscone West 3003 Subject matter experts from Kaiser Permanente and SuperValu share the stage with Amit Jasuja, Snior Vice President, Oracle Identity Management and Security to discuss how the latest advances in Identity Management are helping customers address emerging requirements for securely enabling cloud, social and mobile environments. CON9492: Simplifying your Identity Management Implementation 3:15 p.m. – 4:15 p.m., Moscone West 3008 Implementation experts from British Telecom, Kaiser Permanente and UPMC participate in a panel to discuss best practices, key strategies and lessons learned based on their own experiences. Attendees will hear first-hand what they can do to streamline and simplify their identity management implementation framework for a quick return-on-investment and maximum efficiency. CON9444: Modernized and Complete Access Management 4:45 p.m. – 5:45 p.m., Moscone West 3008 We have come a long way from the days of web single sign-on addressing the core business requirements. Today, as technology and business evolves, organizations are seeking new capabilities like federation, token services, fine grained authorizations, web fraud prevention and strong authentication. This session will explore the emerging requirements for access management, what a complete solution is like, complemented with real-world customer case studies from ETS, Kaiser Permanente and TURKCELL and product demonstrations. Tuesday, October 2, 2012 CON9437: Mobile Access Management 10:15 a.m. – 11:15 a.m., Moscone West 3022 With more than 5 billion mobile devices on the planet and an increasing number of users using their own devices to access corporate data and applications, securely extending identity management to mobile devices has become a hot topic. This session will feature Identity Management evangelists from companies like Intuit, NetApp and Toyota to discuss how to extend your existing identity management infrastructure and policies to securely and seamlessly enable mobile user access. CON9491: Enhancing the End-User Experience with Oracle Identity Governance applications 11:45 a.m. – 12:45 p.m., Moscone West 3008 As organizations seek to encourage more and more user self service, business users are now primary end users for identity management installations. Join experts from Visa and Oracle as they explore how Oracle Identity Governance solutions deliver complete identity administration and governance solutions with support for emerging requirements like cloud identities and mobile devices. CON9447: Enabling Access for Hundreds of Millions of Users 1:15 p.m. – 2:15 p.m., Moscone West 3008 Dealing with scale problems? Looking to address identity management requirements with million or so users in mind? Then take note of Cisco’s implementation. Join this session to hear first-hand how Cisco tackled identity management and scaled their implementation to bolster security and enforce compliance. CON9465: Next Generation Directory – Oracle Unified Directory 5:00 p.m. – 6:00 p.m., Moscone West 3008 Get the 360 degrees perspective from a solution provider, implementation services partner and the customer in this session to learn how the latest Oracle Unified Directory solutions can help you build a directory infrastructure that is optimized to support cloud, mobile and social networking and yet deliver on scale and performance. Wednesday, October 3, 2012 CON9494: Sun2Oracle: Identity Management Platform Transformation 11:45 a.m. – 12:45 p.m., Moscone West 3008 Sun customers are actively defining strategies for how they will modernize their identity deployments. Learn how customers like Avea and SuperValu are leveraging their Sun investment, evaluating areas of expansion/improvement and building momentum. CON9631: Entitlement-centric Access to SOA and Cloud Services 11:45 a.m. – 12:45 p.m., Marriott Marquis, Salon 7 How do you enforce that a junior trader can submit 10 trades/day, with a total value of $5M, if market volatility is low? How can hide sensitive patient information from clerical workers but make it visible to specialists as long as consent has been given or there is an emergency? How do you externalize such entitlements to allow dynamic changes without having to touch the application code? In this session, Uberether and HerbaLife take the stage with Oracle to demonstrate how you can enforce such entitlements on a service not just within your intranet but also right at the perimeter. CON3957 - Delivering Secure Wi-Fi on the Tube as an Olympics Legacy from London 2012 11:45 a.m. – 12:45 p.m., Moscone West 3003 In this session, Virgin Media, the U.K.’s first combined provider of broadband, TV, mobile, and home phone services, shares how it is providing free secure Wi-Fi services to the London Underground, using Oracle Virtual Directory and Oracle Entitlements Server, leveraging back-end legacy systems that were never designed to be externalized. As an Olympics 2012 legacy, the Oracle architecture will form a platform to be consumed by other Virgin Media services such as video on demand. CON9493: Identity Management and the Cloud 1:15 p.m. – 2:15 p.m., Moscone West 3008 Security is the number one barrier to cloud service adoption. Not so for industry leading companies like SaskTel, ConAgra foods and UPMC. This session will explore how these organizations are using Oracle Identity with cloud services and how some are offering identity management as a cloud service. CON9624: Real-Time External Authorization for Middleware, Applications, and Databases 3:30 p.m. – 4:30 p.m., Moscone West 3008 As organizations seek to grant access to broader and more diverse user populations, the importance of centrally defined and applied authorization policies become critical; both to identify who has access to what and to improve the end user experience. This session will explore how customers are using attribute and role-based access to achieve these goals. CON9625: Taking control of WebCenter Security 5:00 p.m. – 6:00 p.m., Moscone West 3008 Many organizations are extending WebCenter in a business to business scenario requiring secure identification and authorization of business partners and their users. Leveraging LADWP’s use case, this session will focus on how customers are leveraging, securing and providing access control to Oracle WebCenter portal and mobile solutions. Thursday, October 4, 2012 CON9662: Securing Oracle Applications with the Oracle Enterprise Identity Management Platform 2:15 p.m. – 3:15 p.m., Moscone West 3008 Oracle Enterprise identity Management solutions are designed to secure access and simplify compliance to Oracle Applications. Whether you are an EBS customer looking to upgrade from Oracle Single Sign-on or a Fusion Application customer seeking to leverage the Identity instance as an enterprise security platform, this session with Qualcomm and Oracle will help you understand how to get the most out of your investment. And here’s the complete listing of all the Identity Management sessions at Oracle OpenWorld.

Read the article

bluetooth not working on Ubuntu 13.10

- by iacopo

I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

Read the article

Java FAQ: Tudo o que você precisa saber

- by Bruno.Borges

Com frequência recebo e-mails de clientes com dúvidas sobre "quando sairá a próxima versão do Java?", ou então "quando vai expirar o Java?" ou ainda "quais as mudanças da próxima versão?". Por isso resolvi escrever aqui um FAQ, respondendo estas dúvidas e muitas outras. Este post estará sempre atualizado, então se você possui alguma dúvida, envie para mim no Twitter @brunoborges. Qual a diferença entre o Oracle JDK e o OpenJDK?O projeto OpenJDK funciona como a implementação de referência Open Source do Java Standard Edition. Empresas como a Oracle, IBM, e Azul Systems suportam e investem no projeto OpenJDK para continuar evoluindo a plataforma Java. O Oracle JDK é baseado no OpenJDK, mas traz outras ferramentas como o Mission Control, e a máquina virtual traz algumas features avançadas como por exemplo o Flight Recorder. Até a versão 6, a Oracle oferecia duas máquinas virtuais: JRockit (BEA) e HotSpot (Sun). A partir da versão 7 a Oracle unificou as máquinas virtuais, e levou as features avançadas do JRockit para dentro da VM HotSpot. Leia também o OpenJDK FAQ. Onde posso obter binários beta Early Access do JDK 7, JDK 8, JDK 9 para testar?A partir do projeto OpenJDK, existe um projeto específico para cada versão do Java. Nestes projetos você pode encontrar binários beta Early Access, além do código-fonte. JDK 6 - http://jdk6.java.net/ JDK 7 - http://jdk7.java.net/ JDK 8 - http://jdk8.java.net/ JDK 9 - http://jdk9.java.net/ Quando acaba o suporte do Oracle Java SE 6, 7, 8? Somente produtos e versões com release oficial são suportados pela Oracle (exemplo: não há suporte para binários beta do JDK 7, JDK 8, ou JDK 9). Existem duas categorias de datas que o usuriário do Java deve estar ciente: EOPU - End of Public UpdatesMomento em que a Oracle não mais disponibiliza publicamente atualizações Oracle SupportPolítica de suporte da Oracle para produtos, incluindo o Oracle Java SE O Oracle Java SE é um produto e portando os períodos de suporte são regidos pelo Oracle Lifetime Support Policy. Consulte este documento para datas atualizadas e específicas para cada versão do Java. O Oracle Java SE 6 já atingiu EOPU (End of Public Updates) e agora é mantido e atualizado somente para clientes através de contrato comercial de suporte. Para maiores informações, consulte a página sobre Oracle Java SE Support. O mais importante aqui é você estar ciente sobre as datas de EOPU para as versões do Java SE da Oracle.Consulte a página do Oracle Java SE Support Roadmap e busque nesta página pela tabela com nome Java SE Public Updates. Nela você encontrará a data em que determinada versão do Java irá atingir EOPU. Como funciona o versionamento do Java?Em 2013, a Oracle divulgou um novo esquema de versionamento do Java para facilmente identificar quando é um release CPU e quando é um release LFR, e também para facilitar o planejamento e desenvolvimento de correções e features para futuras versões. CPU - Critical Patch UpdateAtualizações com correções de segurança. Versão será múltipla de 5, ou com soma de 1 para manter o número ímpar. Exemplos: 7u45, 7u51, 7u55. LFR - Limited Feature ReleaseAtualizações com correções de funcionalidade, melhorias de performance, e novos recursos. Versões de números pares múltiplos de 20, com final 0. Exemplos: 7u40, 7u60, 8u20. Qual a data da próxima atualização de segurança (CPU) do Java SE?Lançamentos do tipo CPU são controlados e pré-agendados pela Oracle e se aplicam a todos os produtos, inclusive o Oracle Java SE. Estes releases acontecem a cada 3 meses, sempre na Terça-feira mais próxima do dia 17 dos meses de Janeiro, Abril, Julho, e Outubro. Consulte a página Critical Patch Updates, Security Alerts and Third Party Bulleting para saber das próximas datas. Caso tenha interesse, você pode acompanhar através de recebimentos destes boletins diretamente no seu email. Veja como assinar o Boletim de Segurança da Oracle. Qual a data da próxima atualização de features (LFR) do Java SE?A Oracle reserva o direito de não divulgar estas datas, assim como o faz para todos os seus produtos. Entretanto é possível acompanhar o desenvolvimento da próxima versão pelos sites do projeto OpenJDK. A próxima versão do JDK 7 será o update 60 e binários beta Early Access já estão disponíveis para testes. A próxima versão doJDK 8 será o update 20 e binários beta Early Access já estão disponíveis para testes. Onde posso ver as mudanças e o que foi corrigido para a próxima versão do Java?A Oracle disponibiliza um changelog para cada binário beta Early Access divulgado no portal Java.net. JDK 7 update 60 changelogs JDK 8 update 20 changelogs Quando o Java da minha máquina (ou do meu usuário) vai expirar?Conheçendo o sistema de versionamento do Java e a periodicidade dos releases de CPU, o usuário pode determinar quando que um update do Java irá expirar. De todo modo, a cada novo update, a Oracle já informa quando que este update deverá expirar diretamente no release notes da versão. Por exemplo, no release notes da versão Oracle Java SE 7 update 55, está escrito na seção JRE Expiration Date o seguinte: The JRE expires whenever a new release with security vulnerability fixes becomes available. Critical patch updates, which contain security vulnerability fixes, are announced one year in advance on Critical Patch Updates, Security Alerts and Third Party Bulletin. This JRE (version 7u55) will expire with the release of the next critical patch update scheduled for July 15, 2014. For systems unable to reach the Oracle Servers, a secondary mechanism expires this JRE (version 7u55) on August 15, 2014. After either condition is met (new release becoming available or expiration date reached), the JRE will provide additional warnings and reminders to users to update to the newer version. For more information, see JRE Expiration Date.Ou seja, a versão 7u55 irá expirar com o lançamento do próximo release CPU, pré-agendado para o dia 15 de Julho de 2014. E caso o computador do usuário não possa se comunicar com o servidor da Oracle, esta versão irá expirar forçadamente no dia 15 de Agosto de 2014 (através de um mecanismo embutido na versão 7u55). O usuário não é obrigado a atualizar para versões LFR e portanto, mesmo com o release da versão 7u60, a versão atual 7u55 não irá expirar.Veja o release notes do Oracle Java SE 8 update 5. Encontrei um bug. Como posso reportar bugs ou problemas no Java SE, para a Oracle?Sempre que possível, faça testes com os binários beta antes da versão final ser lançada. Qualquer problema que você encontrar com estes binários beta, por favor descreva o problema através do fórum de Project Feebdack do JDK.Caso você encontre algum problema em uma versão final do Java, utilize o formulário de Bug Report. Importante: bugs reportados por estes sistemas não são considerados Suporte e portanto não há SLA de atendimento. A Oracle reserva o direito de manter o bug público ou privado, e também de informar ou não o usuário sobre o progresso da resolução do problema. Tenho uma dúvida que não foi respondida aqui. Como faço?Se você possui uma pergunta que não foi respondida aqui, envie para bruno.borges_at_oracle.com e caso ela seja pertinente, tentarei responder neste artigo. Para outras dúvidas, entre em contato pelo meu Twitter @brunoborges.

Read the article

Fragmented Log files could be slowing down your database

- by Fatherjack

Something that is sometimes forgotten by a lot of DBAs is the fact that database log files get fragmented in the same way that you get fragmentation in a data file. The cause is very different but the effect is the same – too much effort reading and writing data. Data files get fragmented as data is changed through normal system activity, INSERTs, UPDATEs and DELETEs cause fragmentation and most experienced DBAs are monitoring their indexes for fragmentation and dealing with it accordingly. However, you don’t hear about so many working on their log files. How can a log file get fragmented? I’m glad you asked. When you create a database there are at least two files created on the disk storage; an mdf for the data and an ldf for the log file (you can also have ndf files for extra data storage but that’s off topic for now). It is wholly possible to have more than one log file but in most cases there is little point in creating more than one as the log file is written to in a ‘wrap-around’ method (more on that later). When a log file is created at the time that a database is created the file is actually sub divided into a number of virtual log files (VLFs). The number and size of these VLFs depends on the size chosen for the log file. VLFs are also created in the space added to a log file when a log file growth event takes place. Do you have your log files set to auto grow? Then you have potentially been introducing many VLFs into your log file. Let’s get to see how many VLFs we have in a brand new database. USE master GO CREATE DATABASE VLF_Test ON ( NAME = VLF_Test, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test.mdf', SIZE = 100, MAXSIZE = 500, FILEGROWTH = 50 ) LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5MB, MAXSIZE = 250MB, FILEGROWTH = 5MB ); go USE VLF_Test go DBCC LOGINFO; The results of this are firstly a new database is created with specified files sizes and the the DBCC LOGINFO results are returned to the script editor. The DBCC LOGINFO results have plenty of interesting information in them but lets first note there are 4 rows of information, this relates to the fact that 4 VLFs have been created in the log file. The values in the FileSize column are the sizes of each VLF in bytes, you will see that the last one to be created is slightly larger than the others. So, a 5MB log file has 4 VLFs of roughly 1.25 MB. Lets alter the CREATE DATABASE script to create a log file that’s a bit bigger and see what happens. Alter the code above so that the log file details are replaced by LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 1GB, MAXSIZE = 25GB, FILEGROWTH = 1GB ); With a bigger log file specified we get more VLFs What if we make it bigger again? LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5GB, MAXSIZE = 250GB, FILEGROWTH = 5GB ); This time we see more VLFs are created within our log file. We now have our 5GB log file comprised of 16 files of 320MB each. In fact these sizes fall into all the ranges that control the VLF creation criteria – what a coincidence! The rules that are followed when a log file is created or has it’s size increased are pretty basic. If the file growth is lower than 64MB then 4 VLFs are created If the growth is between 64MB and 1GB then 8 VLFs are created If the growth is greater than 1GB then 16 VLFs are created. Now the potential for chaos comes if the default values and settings for log file growth are used. By default a database log file gets a 1MB log file with unlimited growth in steps of 10%. The database we just created is 6 MB, let’s add some data and see what happens. USE vlf_test go -- we need somewhere to put the data so, a table is in order IF OBJECT_ID('A_Table') IS NOT NULL DROP TABLE A_Table go CREATE TABLE A_Table ( Col_A int IDENTITY, Col_B CHAR(8000) ) GO -- Let's check the state of the log file -- 4 VLFs found EXECUTE ('DBCC LOGINFO'); go -- We can go ahead and insert some data and then check the state of the log file again INSERT A_Table (col_b) SELECT TOP 500 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO -- insert 500 rows and we get 22 VLFs EXECUTE ('DBCC LOGINFO'); go -- Let's insert more rows INSERT A_Table (col_b) SELECT TOP 2000 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO 10 -- insert 2000 rows, in 10 batches and we suddenly have 107 VLFs EXECUTE ('DBCC LOGINFO'); Well, that escalated quickly! Our log file is split, internally, into 107 fragments after a few thousand inserts. The same happens with any logged transactions, I just chose to illustrate this with INSERTs. Having too many VLFs can cause performance degradation at times of database start up, log backup and log restore operations so it’s well worth keeping a check on this property. How do we prevent excessive VLF creation? Creating the database with larger files and also with larger growth steps and actively choosing to grow your databases rather than leaving it to the Auto Grow event can make sure that the growths are made with a size that is optimal. How do we resolve a situation of a database with too many VLFs? This process needs to be done when the database is under little or no stress so that you don’t affect system users. The steps are: BACKUP LOG YourDBName TO YourBackupDestinationOfChoice Shrink the log file to its smallest possible size DBCC SHRINKFILE(FileNameOfTLogHere, TRUNCATEONLY) * Re-size the log file to the size you want it to, taking in to account your expected needs for the coming months or year. ALTER DATABASE YourDBName MODIFY FILE ( NAME = FileNameOfTLogHere, SIZE = TheSizeYouWantItToBeIn_MB) * – If you don’t know the file name of your log file then run sp_helpfile while you are connected to the database that you want to work on and you will get the details you need. The resize step can take quite a while This is already detailed far better than I can explain it by Kimberley Tripp in her blog 8-Steps-to-better-Transaction-Log-throughput.aspx. The result of this will be a log file with a VLF count according to the bullet list above. Knowing when VLFs are being created By complete coincidence while I have been writing this blog (it’s been quite some time from it’s inception to going live) Jonathan Kehayias from SQLSkills.com has written a great article on how to track database file growth using Event Notifications and Service Broker. I strongly recommend taking a look at it as this is going to catch any sneaky auto grows that take place and let you know about them right away. Hassle free monitoring of VLFs If you are lucky or wise enough to be using SQL Monitor or another monitoring tool that let’s you write your own custom metrics then you can keep an eye on this very easily. There is a custom metric for VLFs (written by Stuart Ainsworth) already on the site and there are some others there are very useful so take a moment or two to look around while you are there. Resources MSDN – http://msdn.microsoft.com/en-us/library/ms179355(v=sql.105).aspx Kimberly Tripp from SQLSkills.com – http://www.sqlskills.com/BLOGS/KIMBERLY/post/8-Steps-to-better-Transaction-Log-throughput.aspx Thomas LaRock at Simple-Talk.com – http://www.simple-talk.com/sql/database-administration/monitoring-sql-server-virtual-log-file-fragmentation/ Disclosure I am a Friend of Red Gate. This means that I am more than likely to say good things about Red Gate DBA and Developer tools. No matter how awesome I make them sound, take the time to compare them with other products before you contact the Red Gate sales team to make your order.

Read the article

15 Kasim 2012 Oracle Day

- by TUFEKCIOGLU,FATIH

15.Kasim'da Harbiye Istanbul Kongre Merkezi'nde düzenlenecek Oracle Day'e ait etkinlik bilgileri : Oracle Day etkinlik bilgileri için tiklayiniz En Son Teknolojiden Faydalanin: Inovasyona ve Rekabete Zaman Birakin 15 Kasim 2012 Bulut Bilisim, Mobilite, Sosyal Medya ve Büyük Veri, bildigimiz dünyayi yeniden tanimliyor. Bu teknolojileri kurumuna ilk getirenlerden biri olun; daha hizli yeni ürün ve hizmet gelistirme, müsteri deneyimini iyilestirme ve yeni inovatif is modellerini hayata geçirme firsati yakalayarak rekabetteki konumunuzu güçlendirin. Oracle ve is ortaklari bu noktada size, teknolojik yenilikleri kurumunuza uyarlamanizda yardim ederken, sizin de piyasadaki degisimlerden rakiplerinizden önce avantaj elde etmenizi saglar. Oracle'in, birlikte çalismak için tasarlanmis olan yazilim ve donanimlarda en yeni teknolojileri kullanarak, bilgi teknolojilerini nasil sadelestirdigini ögrenmek için Oracle Day'de bize katilin. Oracle Day'de: Oracle'in Bulut Bilisim, Büyük Veri, Sosyal Medya, is uygulamalari çözümleri hakkinda bilgi edinme, Basarili is dönüsümleri hakkinda örnek basari hikayelerini dinleme, Sizinle ayni zorluklari tecrübe eden sektör çalisanlariyla biraraya gelme, Oracle uzmanlari ve is ortaklari ile tanisma ve yeni ürün tanitimlarini izleme, Oracle OpenWorld'den en yeni ürün bilgilerini edinme firsatini kaçirmayin... Saygilarimizla, Oracle Türkiye Hemen Kaydolun! Platin Sponsor Istanbul Kongre Merkezi Taskisla Caddesi Harbiye 34367 Istanbul / Türkiye 15 Kasim 2012, Persembe 08:30 - 18:30 LCV: [email protected] oracle.com/oracleday Bizi takip edin: #oracleday Oracle Is Ortagi Müsteri Basari Hikayesi TROUG Sunum Ingilizce'dir Günün Ajandasi 08:45-09:30 Kayit 09:30-10:00 Hos Geldiniz Filiz Dogan, Genel Müdür, Oracle Türkiye 10:00-10:30 Navigating Complexity by Simplifying I.T. Andrew Mendelsohn, Kidemli Baskan Yardimcisi, Oracle Veritabani Sunucu Teknolojileri, Oracle 10:30-11:00 Dönüsümsel Bulut Yolculugu Ilker Kuruöz, CIO, Turkcell 11:00-11:20 Yeni Dönemde Veri Merkezlerinin Olmazsa Olmazlari Yalim Eristiren, Genel Müdür Yardimcisi, Intel 11:20-11:30 Slimfit Feyza Narli, Is Çözümleri Direktörü, Innova 11:30-12:00 Java ile Inovasyon Cuma Yigit, Teknik Mimar, Etiya Yusuf Tok, Java Grup Yöneticisi, OBSS Ersun Engel, Satis Müdürü, Oracle 12:00-12:10 Kahve Molasi 1. SALON 2. SALON 3. SALON 4. SALON 5. SALON 6. SALON 7. SALON 8. SALON 9. SALON 10. SALON Müsteri Deneyimi: Çalisaninizi Yetkinlestirin. Markanizi Güçlendirin. Is Süreçlerinde Degisim Daha Fazla Veri, Daha Hizli Sonuç: Isinizi Analitik Çözümlerle Güçlendirin Peki Ama Nasil? Bulut Uygulayicilari için Çözüm Haritasi Is Uygulamalarinizda Inovasyonun Gücünü Kullanin Yeni Nesil Veri Merkezi ile BT'nin Gücünü Ortaya Çikartin Oracle & Is Ortaklari Çözümleri - Basari Hikayeleri I Oracle & Is Ortaklari Çözümleri - Basari Hikayeleri II Oracle Finansal Hizmetler - Core Banking and Analytical Solutions Oracle User Group (TROUG) 12:10-12:40 Müsteri Deneyimi: Çalisaninizi Yetkinlestirin. Markanizi Güçlendirin. Tekfen Ceyhan Çelik Fabrikasi Maliyet Yönetimi ve Üretim Takibi Daha Fazla Veriyle, Daha Hizli Hareket: Yaraticiligi Aksiyonla Güçlendirme Architect Your Cloud: A Blueprint for Cloud Builders Technology Strategies that Drive Business Excellence: Get Social. Be Mobile. Run Cloud. Yeni Nesil Veri Merkezi ile BT'nin Gücünü Ortaya Çikartin Innovate with Oracle - Virtual Banking and Self Service Channels What's Next for Oracle Database? Oracle Innova Oracle Oracle Oracle Oracle Oracle Oracle 12:40-13:40 Ögle Yemegi 13:40-14:10 Uygulamalariniz Artik Bulutta 21. Yüzyilda Finans: Potansiyeli Kullanin - Sonuçlara Ulasin! "Düsünce Hizinda" Intel Islemcili Oracle Büyük Veri ve Is Analitigi Çözümleri Deniz Seviyesinden Bulutlara I CRM'inizi Sosyallestirin: Telaura Sosyal CRM Yeni Nesil Veri Merkezinde Trend: Sadelik Abone Bilgi Yönetim Sistemi (ABYS) Yüksek Oracle Veri Tabani Performansi - Oracle Veri Tabani Oracle Veri Depolama Sistemi ile Entegre Oldugunda Sigortacilikta Finansal Transformasyon ve Entegre Veri Ambari Çözümleri SQL/PLSQL Yeni Özellikler Oracle Oracle Intel Oracle Etiya Oracle Inspirit Oracle Oraturk TROUG 14:10-14:20 Kahve Molasi 14:20-14:50 Satis ve Pazarlamada Sosyal Mecralar Müsteri Basari Hikayeleri Paneli: Degisim Yolculugu ve Sonuçlari Tukas'in Analitik Yolculugu Deniz Seviyesinden Bulutlara II Loupe: IP Tabanli Servisler için Proaktif Izleme Veri Merkezinizdeki Riskleri Ortadan Kaldirin Oracle iAS to WebLogic Migrasyonu Oracle ZFS Storage Appliance - Turkcell Deneyimleri Analytical Transformation - Risk and Finance Together to Address the Regulatory Changes Today and Tomorrow Veri Madenciligi Veritabaninda Yapilir: Uygulamalariyla Oracle R Enterprise ve Oracle Data Mining Opsiyonu Oracle Akbank, Teknosa, Dogus Holding, Ceynak Gtech Oracle Netas Oracle OBSS Turkcell&Gantek Oracle TROUG 14:50-15:00 Kahve Molasi 15:00-15:30 Yetenek Yönetiminde Entegre Çözümler: Taleo ile Ise Alim Artik Daha Kolay Müsteri Basari Hikayeleri Paneli: Degisim Yolculugu ve Sonuçlari Büyük Veri & Exalytics - Exadata'nin Gelecek Rotasi - Bütünlesik (Engineered) Sistemler'de Ücretsiz Platin Hizmetleri Aksigorta Oracle ATS (Application Testing Suite) ile Uygulamalarini Nasil Test Ediyor? Üstün Performans ve Esneklik ile Servis Seviyenizi Arttirin Akilli Belediyecilik Uygulamalarinda Oracle BPM ile Süreç Yönetimi Teyp ile Uçtan Uca Yedekleme Çözümleri Connecting with Customers to Enhance Revenue Generation: Unleashing the Power of an Enterprise Revenue Management and Billing Solution Günümüzün Uygulama Mimarisi Sorunlari ve Çözüm Önerileri Oracle Akbank, Teknosa, Dogus Holding, Ceynak Oracle Oracle Aksigorta Oracle Sampas Remivac Oracle TROUG 15:30-15:40 Kahve Molasi 15:40-16:10 JD Edwards Yeni Sürüm ile Satis Agi Yönetimi Oracle Policy Automation ile Türkçe Merkezi Is Kurallari Yönetimi Oracle BI ile Kurumsal Karne Çözümleri Turkcell Süperbulut ile Yazilim Artik Hizmetinizde Bütünlesik (Engineered) Sistemler Artik SAP Müsterilerinde de Fark Yaratiyor Yeni Nesil Veri Merkezi Olusturma: Denenmis ve Ispatlanmis Yöntemler Türk Telekom SOA Projesi Basari Hikayesi Yapi Kredi Sigorta Uygulamalarinda Son Kullanici Deneyimini Nasil Izliyor? 2013 NFC Trendleri Karagöz ile Hacivat Veri Tabaninda TupperWare & Akademi Danismanlik Oracle Oracle Turkcell Oracle Oracle Türk Telekom Yapi Kredi Sigorta Smartsoft TROUG 16:10-16:20 Kahve Molasi 16:20-16:50 Tutarli, Tekil Veriye Yolculuk: Oracle Ana Veri Yönetimi Turkcell/Superonline'da Varlik Yönetimi Her Tür Verinin Endeca ile Rahat Analizi Bulut Bilisim'de Güvenlik Nasil Saglanir? Rekabette Kazanmak: GoldenGate ile Dogru Kararlari Rakiplerinizden Önce Verin. Veri Merkeziniz için Bulut Altyapi Stratejileri Oracle Orkestrasi: Çok Sesli Yönetime Kulak Verin Lojistik Zekasi / Horoz Lojistik Basari Hikayesi Bütünlesik Sistemler (Engineered Systems) ile Yüksek Performansli Java Uygulamalari International Growth - Helping the Banks Standardize Overseas Operations Oracle Big Data Oracle Turkcell Oracle Oracle Oracle Oracle Kora & Horoz Lojistik Oracle Oracle TROUG 16:50-18:30 Kokteyl Eger bir kamu kurumunun/kurulusunun çalisani veya görevlisi iseniz, bu etkinlige iliskin önemli etik kurallara iliskin bilgi için lütfen buraya tiklayiniz Copyright 2012, Oracle and/or its affiliates. All rights reserved. Bize Ulasin | Yasal Uyarilar | Gizlilik Beyani

Read the article

SQL SERVER – A Quick Look at Logging and Ideas around Logging

- by pinaldave

This blog post is written in response to the T-SQL Tuesday post on Logging. When someone talks about logging, personally I get lots of ideas about it. I have seen logging as a very generic term. Let me ask you this question first before I continue writing about logging. What is the first thing comes to your mind when you hear word “Logging”? Now ask the same question to the guy standing next to you. I am pretty confident that you will get a different answer from different people. I decided to do this activity and asked 5 SQL Server person the same question. Question: What is the first thing comes to your mind when you hear the word “Logging”? Strange enough I got a different answer every single time. Let me just list what answer I got from my friends. Let us go over them one by one. Output Clause The very first person replied output clause. Pretty interesting answer to start with. I see what exactly he was thinking. SQL Server 2005 has introduced a new OUTPUT clause. OUTPUT clause has access to inserted and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. Here are some references for Output Clause: OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE Reasons for Using Output Clause – Quiz Tips from the SQL Joes 2 Pros Development Series – Output Clause in Simple Examples Error Logs I was expecting someone to mention Error logs when it is about logging. The error log is the most looked place when there is any error either with the application or there is an error with the operating system. I have kept the policy to check my server’s error log every day. The reason is simple – enough time in my career I have figured out that when I am looking at error logs I find something which I was not expecting. There are cases, when I noticed errors in the error log and I fixed them before end user notices it. Other common practices I always tell my DBA friends to do is that when any error happens they should find relevant entries in the error logs and document the same. It is quite possible that they will see the same error in the error log and able to fix the error based on the knowledge base which they have created. There can be many different kinds of error log files exists in SQL Server as well – 1) SQL Server Error Logs 2) Windows Event Log 3) SQL Server Agent Log 4) SQL Server Profile Log 5) SQL Server Setup Log etc. Here are some references for Error Logs: Recycle Error Log – Create New Log file without Server Restart SQL Error Messages Change Data Capture I got surprised with this answer. I think more than the answer I was surprised by the person who had answered me this one. I always thought he was expert in HTML, JavaScript but I guess, one should never assume about others. Indeed one of the cool logging feature is Change Data Capture. Change Data Capture records INSERTs, UPDATEs, and DELETEs applied to SQL Server tables, and makes a record available of what changed, where, and when, in simple relational ‘change tables’ rather than in an esoteric chopped salad of XML. These change tables contain columns that reflect the column structure of the source table you have chosen to track, along with the metadata needed to understand the changes that have been made. Here are some references for Change Data Capture: Introduction to Change Data Capture (CDC) in SQL Server 2008 Tuning the Performance of Change Data Capture in SQL Server 2008 Download Script of Change Data Capture (CDC) CDC and TRUNCATE – Cannot truncate table because it is published for replication or enabled for Change Data Capture Dynamic Management View (DMV) I like this answer. If asked I would have not come up with DMV right away but in the spirit of the original question, I think DMV does log the data. DMV logs or stores or records the various data and activity on the SQL Server. Dynamic management views return server state information that can be used to monitor the health of a server instance, diagnose problems, and tune performance. One can get plethero of information from DMVs – High Availability Status, Query Executions Details, SQL Server Resources Status etc. Here are some references for Dynamic Management View (DMV): SQL SERVER – Denali – DMV Enhancement – sys.dm_exec_query_stats – New Columns DMV – sys.dm_os_windows_info – Information about Operating System DMV – sys.dm_os_wait_stats Explanation – Wait Type – Day 3 of 28 DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module Transaction Log Impact Detection Using DMV – dm_tran_database_transactions Log Files I almost flipped with this final answer from my friend. This should be probably the first answer. Yes, indeed log file logs the SQL Server activities. One can write infinite things about log file. SQL Server uses log file with the extension .ldf to manage transactions and maintain database integrity. Log file ensures that valid data is written out to database and system is in a consistent state. Log files are extremely useful in case of the database failures as with the help of full backup file database can be brought in the desired state (point in time recovery is also possible). SQL Server database has three recovery models – 1) Simple, 2) Full and 3) Bulk Logged. Each of the model uses the .ldf file for performing various activities. It is very important to take the backup of the log files (along with full backup) as one never knows when backup of the log file come into the action and save the day! How to Stop Growing Log File Too Big Reduce the Virtual Log Files (VLFs) from LDF file Log File Growing for Model Database – model Database Log File Grew Too Big master Database Log File Grew Too Big SHRINKFILE and TRUNCATE Log File in SQL Server 2008 Can I just say I loved this month’s T-SQL Tuesday Question. It really provoked very interesting conversation around me. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Search Results

Search found 4947 results on 198 pages for 'insurance policy administration'.

Page 185/198 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192 | Next Page >

- by Mike Janson

- by David

- by user796466

- by Honglin Su

- by rajbk

- by Trevor Bekolay

- by DigitalGeekery

- by constant

- by Ben Griswold

- by Trevor Bekolay

- by Dave Noderer

- by Bil Simser

- by andrewbrust

- by Vladimir Franciz S. Blando

- by sreejukg

- by JuergenKress

- by Melissa Centurio Lopes

- by sathya

- by Tanu Sood

- by iacopo

- by Bruno.Borges

- by Fatherjack

- by TUFEKCIOGLU,FATIH

- by pinaldave

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192 | Next Page >