Search Results

Search found 4947 results on 198 pages for 'insurance policy administration'.

Page 187/198 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• The SPARC SuperCluster

  - by Karoly Vegh

  Oracle has been providing a lead in the Engineered Systems business for quite a while now, in accordance with the motto "Hardware and Software Engineered to Work Together." Indeed it is hard to find a better definition of these systems.  Allow me to summarize the idea. It is:  Build a compute platform optimized to run your technologies Develop application aware, intelligently caching storage components Take an impressively fast network technology interconnecting it with the compute nodes Tune the application to scale with the nodes to yet unseen performance Reduce the amount of data moving via compression Provide this all in a pre-integrated single product with a single-pane management interface All these ideas have been around in IT for quite some time now. The real Oracle advantage is adding the last one to put these all together. Oracle has built quite a portfolio of Engineered Systems, to run its technologies - and run those like they never ran before. In this post I'll focus on one of them that serves as a consolidation demigod, a multi-purpose engineered system.  As you probably have guessed, I am talking about the SPARC SuperCluster. It has many great features inherited from its predecessors, and it adds several new ones. Allow me to pick out and elaborate about some of the most interesting ones from a technological point of view.  I. It is the SPARC SuperCluster T4-4. That is, as compute nodes, it includes SPARC T4-4 servers that we learned to appreciate and respect for their features: The SPARC T4 CPUs: Each CPU has 8 cores, each core runs 8 threads. The SPARC T4-4 servers have 4 sockets. That is, a single compute node can in parallel, simultaneously  execute 256 threads. Now, a full-rack SPARC SuperCluster has 4 of these servers on board. Remember the keyword demigod.  While retaining the forerunner SPARC T3's exceptional throughput, the SPARC T4 CPUs raise the bar with single performance too - a humble 5x better one than their ancestors.  actually, the SPARC T4 CPU cores run in both single-threaded and multi-threaded mode, and switch between these two on-the-fly, fulfilling not only single-threaded OR multi-threaded applications' needs, but even mixed requirements (like in database workloads!). Data security, anyone? Every SPARC T4 CPU core has a built-in encryption engine, that is, encryption algorithms cast into silicon.  A PCI controller right on the chip for customers who need I/O performance.  Built-in, no-cost Virtualization:  Oracle VM for SPARC (the former LDoms or Logical Domains) is not a server-emulation virtualization technology but rather a serverpartitioning one, the hypervisor runs in the server firmware, and all the VMs' HW resources (I/O, CPU, memory) are accessed natively, without performance overhead.  This enables customers to run a number of Solaris 10 and Solaris 11 VMs separated, independent of each other within a physical server II. For Database performance, it includes Exadata Storage Cells - one of the main reasons why the Exadata Database Machine performs at diabolic speed. What makes them important? They provide DB backend storage for your Oracle Databases to run on the SPARC SuperCluster, that is what they are built and tuned for DB performance.  These storage cells are SQL-aware.  That is, if a SPARC T4 database compute node executes a query, it doesn't simply request tons of raw datablocks from the storage, filters the received data, and throws away most of it where the statement doesn't apply, but provides the SQL query to the storage node too. The storage cell software speaks SQL, that is, it is able to prefilter and through that transfer only the relevant data. With this, the traffic between database nodes and storage cells is reduced immensely. Less I/O is a good thing - as they say, all the CPUs of the world do one thing just as fast as any other - and that is waiting for I/O.  They don't only pre-filter, but also provide data preprocessing features - e.g. if a DB-node requests an aggregate of data, they can calculate it, and handover only the results, not the whole set. Again, less data to transfer.  They support the magical HCC, (Hybrid Columnar Compression). That is, data can be stored in a precompressed form on the storage. Less data to transfer.  Of course one can't simply rely on disks for performance, there is Flash Storage included there for caching.  III. The low latency, high-speed backbone network: InfiniBand, that interconnects all the members with: Real High Speed: 40 Gbit/s. Full Duplex, of course. Oh, and a really low latency.  RDMA. Remote Direct Memory Access. This technology allows the DB nodes to do exactly that. Remotely, directly placing SQL commands into the Memory of the storage cells. Dodging all the network-stack bottlenecks, avoiding overhead, placing requests directly into the process queue.  You can also run IP over InfiniBand if you please - that's the way the compute nodes can communicate with each other.  IV. Including a general-purpose storage too: the ZFSSA, which is a unified storage, providing NAS and SAN access too, with the following features:  NFS over RDMA over InfiniBand. Nothing is faster network-filesystem-wise.  All the ZFS features onboard, hybrid storage pools, compression, deduplication, snapshot, replication, NFS and CIFS shares Storageheads in a HA-Cluster configuration providing availability of the data  DTrace Live Analytics in a web-based Administration UI Being a general purpose application data storage for your non-database applications running on the SPARC SuperCluster over whichever protocol they prefer, easily replicating, snapshotting, cloning data for them.  There's a lot of great technology included in Oracle's SPARC SuperCluster, we have talked its interior through. As for external scalability: you can start with a half- of full- rack SPARC SuperCluster, and scale out to several racks - that is, stacking not separate full-rack SPARC SuperClusters, but extending always one large instance of the size of several full-racks. Yes, over InfiniBand network. Add racks as you grow.  What technologies shall run on it? SPARC SuperCluster is a general purpose scaleout consolidation/cloud environment. You can run Oracle Databases with RAC scaling, or Oracle Weblogic (end enjoy the SPARC T4's advantages to run Java). Remember, Oracle technologies have been integrated with the Oracle Engineered Systems - this is the Oracle on Oracle advantage. But you can run other software environments such as SAP if you please too. Run any application that runs on Oracle Solaris 10 or Solaris 11. Separate them in Virtual Machines, or even Oracle Solaris Zones, monitor and manage those from a central UI. Here the key takeaways once again: The SPARC SuperCluster: Is a pre-integrated Engineered System Contains SPARC T4-4 servers with built-in virtualization, cryptography, dynamic threading Contains the Exadata storage cells that intelligently offload the burden of the DB-nodes  Contains a highly available ZFS Storage Appliance, that provides SAN/NAS storage in a unified way Combines all these elements over a high-speed, low-latency backbone network implemented with InfiniBand Can grow from a single half-rack to several full-rack size Supports the consolidation of hundreds of applications To summarize: All these technologies are great by themselves, but the real value is like in every other Oracle Engineered System: Integration. All these technologies are tuned to perform together. Together they are way more than the sum of all - and a careful and actually very time consuming integration process is necessary to orchestrate all these for performance. The SPARC SuperCluster's goal is to enable infrastructure operations and offer a pre-integrated solution that can be architected and delivered in hours instead of months of evaluations and tests. The tedious and most importantly time and resource consuming part of the work - testing and evaluating - has been done.  Now go, provide services.   -- charlie  

  Read the article

• Oracle Tutor: Top 10 to Implement Sustainable Policies and Procedures

  - by emily.chorba(at)oracle.com

  Overview Your organization (executives, managers, and employees) understands the value of having written business process documents (process maps, procedures, instructions, reference documents, and form abstracts). Policies and procedures should be documented because they help to reduce the range of individual decisions and encourage management by exception: the manager only needs to give special attention to unusual problems, not covered by a specific policy or procedure. As more and more procedures are written to cover recurring situations, managers will begin to make decisions which will be consistent from one functional area to the next.Companies should take a project management approach when implementing an environment for a sustainable documentation program and do the following:1. Identify an Executive Champion2. Put together a winning team3. Assign ownership4. Centralize publishing5. Establish the Document Maintenance Process Up Front6. Document critical activities only7. Document actual practice8. Minimize documentation9. Support continuous improvement10. Keep it simple 1. Identify an Executive ChampionAppoint a top down driver. Select one key individual to be a mentor for the procedure planning team. The individual should be a senior manager, such as your company president, CIO, CFO, the vice-president of quality, manufacturing, or engineering. Written policies and procedures can be important supportive aids when known to express the thinking for the chief executive officer and / or the president and to have his or her full support. 2. Put Together a Winning TeamChoose a strong Project Management Leader and staff the procedure planning team with management members from cross functional groups. Make sure team members have the responsibility - and the authority - to make things happen.The winning team should consist of the Documentation Project Manager, Document Owners (one for each functional area), a Document Controller, and Document Specialists (as needed). The Tutor Implementation Guide has complete job descriptions for these roles. 3. Assign Ownership It is virtually impossible to keep process documentation simple and meaningful if employees who are far removed from the activity itself create it. It is impossible to keep documentation up-to-date when responsibility for the document is not clearly understood.Key to the Tutor methodology, therefore, is the concept of ownership. Each document has a single owner, who is responsible for ensuring that the document is necessary and that it reflects actual practice. The owner must be a person who is knowledgeable about the activity and who has the authority to build consensus among the persons who participate in the activity as well as the authority to define or change the way an activity is performed. The owner must be an advocate of the performers and negotiate, not dictate practices.In the Tutor environment, a document's owner is the only person with the authority to approve an update to that document. 4. Centralize Publishing Although it is tempting (especially in a networked environment and with document management software solutions) to decentralize the control of all documents -- with each owner updating and distributing his own -- Tutor promotes centralized publishing by assigning the Document Administrator (gate keeper) to manage the updates and distribution of the procedures library. 5. Establish a Document Maintenance Process Up Front (and stick to it) Everyone in your organization should know they are invited to suggest changes to procedures and should understand exactly what steps to take to do so. Tutor provides a set of procedures to help your company set up a healthy document control system. There are many document management products available to automate some of the document change and maintenance steps. Depending on the size of your organization, a simple document management system can reduce the effort it takes to track and distribute document changes and updates. Whether your company decides to store the written policies and procedures on a file server or in a database, the essential tasks for maintaining documents are the same, though some tasks are automated. 6. Document Critical Activities Only The best way to keep your documentation simple is to reduce the number of process documents to a bare minimum and to include in those documents only as much detail as is absolutely necessary. The first step to reducing process documentation is to document only those activities that are deemed critical. Not all activities require documentation. In fact, some critical activities cannot and should not be standardized. Others may be sufficiently documented with an instruction or a checklist and may not require a procedure. A document should only be created when it enhances the performance of the employee performing the activity. If it does not help the employee, then there is no reason to maintain the document. Activities that represent little risk (such as project status), activities that cannot be defined in terms of specific tasks (such as product research), and activities that can be performed in a variety of ways (such as advertising) often do not require documentation. Sometimes, an activity will evolve to the point where documentation is necessary. For example, an activity performed by single employee may be straightforward and uncomplicated -- that is, until the activity is performed by multiple employees. Sometimes, it is the interaction between co-workers that necessitates documentation; sometimes, it is the complexity or the diversity of the activity.7. Document Actual Practices The only reason to maintain process documentation is to enhance the performance of the employee performing the activity. And documentation can only enhance performance if it reflects reality -- that is, current best practice. Documentation that reflects an unattainable ideal or outdated practices will end up on the shelf, unused and forgotten.Documenting actual practice means (1) auditing the activity to understand how the work is really performed, (2) identifying best practices with employees who are involved in the activity, (3) building consensus so that everyone agrees on a common method, and (4) recording that consensus.8. Minimize Documentation One way to keep it simple is to document at the highest level possible. That is, include in your documents only as much detail as is absolutely necessary.When writing a document, you should ask yourself, What is the purpose of this document? That is, what problem will it solve?By focusing on this question, you can target the critical information.• What questions are the end users likely to have?• What level of detail is required?• Is any of this information extraneous to the document's purpose? Short, concise documents are user friendly and they are easier to keep up to date. 9. Support Continuous Improvement Employees who perform an activity are often in the best position to identify improvements to the process. In other words, continuous improvement is a natural byproduct of the work itself -- but only if the improvements are communicated to all employees who are involved in the process, and only if there is consensus among those employees.Traditionally, process documentation has been used to dictate performance, to limit employees' actions. In the Tutor environment, process documents are used to communicate improvements identified by employees. How does this work? The Tutor methodology requires a process document to reflect actual practice, so the owner of a document must routinely audit its content -- does the document match what the employees are doing? If it doesn't, the owner has the responsibility to evaluate the process, to build consensus among the employees, to identify "best practices," and to communicate these improvements via a document update. Continuous improvement can also be an outgrowth of corrective action -- but only if the solutions to problems are communicated effectively. The goal should be to solve a problem once and only once, which means not only identifying the solution, but ensuring that the solution becomes part of the process. The Tutor system provides the method through which improvements and solutions are documented and communicated to all affected employees in a cost-effective, timely manner; it ensures that improvements are not lost or confined to a single employee. 10. Keep it Simple Process documents don't have to be complex and unfriendly. In fact, the simpler the format and organization, the more likely the documents will be used. And the simpler the method of maintenance, the more likely the documents will be kept up-to-date. Keep it simply by:• Minimizing skills and training required• Following the established Tutor document format and layout• Avoiding technology just for technology's sake No other rule has as major an impact on the success of your internal documentation as -- keep it simple. Learn More For more information about Tutor, visit Oracle.Com or the Tutor Blog. Post your questions at the Tutor Forum.   Emily Chorba Principle Product Manager Oracle Tutor & BPM 

  Read the article

• Big Visible Charts

  - by Robert May

  An important part of Agile is the concept of transparency and visibility. In proper functioning teams, stakeholders can look at any team at any time in the iteration or release and see how that team is doing by simply looking at what we call Big Visible Charts. If you’ve done Scrum, you’ve seen these charts. However, interpreting these charts can often be an art form. There are several different charts that can be useful. In this newsletter, I’ll focus on the Iteration Burndown and Cumulative Flow charts. I’ve included a copy of the spreadsheet that I used to create the charts, and if you don’t have a tool that creates them for you, you can use this spreadsheet to do so. Our preferred tool for managing Scrum projects is Rally. Rally creates all of these charts for you, saving you quite a bit of time. The Iteration Burndown and Cumulative Flow Charts This is the main chart that teams use. Although less useful to stakeholders, this chart is critical to the team and provides quite a bit of information to the team about how their iteration is going. Most charts are a combination of the charts below, so you may need to combine aspects of each section to understand what is happening in your iterations. Ideal Ah, isn’t that a pretty picture? Unfortunately, it’s also very unrealistic. I’ve seen iterations that come close to ideal, but never that match perfectly. If your iteration matches perfectly, chances are, someone is playing with the numbers. Reality is just too difficult to have a burndown chart that matches this exactly. Late Planning Iteration started, but the team didn’t. You can tell this by the fact that the real number of estimated hours didn’t appear until day two. In the cumulative flow, you can also see that nothing was defined in Day one and two. You want to avoid situations like this. You’ll note that the team had to burn faster than is ideal to meet the iteration because of the late planning. This often results in long weeks and days. Testing Starved Determining whether or not testing is starved is difficult without the cumulative flow. The pattern in the burndown could be nothing more that developers not completing stories early enough or could be caused by stories being too big. With the cumulative flow, however, you see that only small bites are in progress and stories were completed early, but testing didn’t start testing until the end of the iteration, and didn’t complete testing all stories in the iteration. When this happens, question whether or not your testing resources are sufficient for your team and whether or not acceptance is adequately defined. No Testing With this one, both graphs show the same thing; the team needs testers and testing! Without testing, what was completed cannot be verified to make sure that it is acceptable to the business. If you find yourself in this situation, review your testing practices and acceptance testing process and make changes today. Late Development With this situation, both graphs tell a story. In the top graph, you can see that the hours failed to burn down as quickly as the team expected. This could be caused by the team not correctly estimating their hours or the team could have had illness or some other issue that affected them. Often, when teams are tackling something that is more unknown, they’ll run into technical barriers that cause the burn down to happen slower than expected. In the cumulative flow graph, you can see that not much was completed in the first few days. This could be because of illness or technical barriers or simply poor estimation. Testing was able to keep up with everything that was completed, however. No Tool Updating When you see graphs that look like this, you can be assured that it’s because the team is not updating the tool that generates the graphs. Review your policy for when they are to update. On the teams that I run, I require that each team member updates the tool at least once daily. You should also check to see how well the team is breaking down stories into tasks. If they’re creating few large tasks, graphs can look similar to this. As a general rule, I never allow tasks, other than Unit Testing and Uncertainty, to be greater than eight hours in duration. Scope Increase I always encourage team members to enter in however much time they think they have left on a task, even if that means increasing the total amount of time left to do. You get a much better and more realistic picture this way. Increasing time remaining could explain the burndown graph, but by looking at the cumulative flow graph, we can see that stories were added to the iteration and scope was increased. Since planning should consume all of the hours in the iteration, this is almost always a bad thing. If the scope change happened late in the iteration and the hours remaining were well below the ideal burn, then increasing scope is probably o.k., but estimation needs to get better. However, with the charts above, that’s clearly not what happened and the team was required to do extra work to make the iteration. If you find this happening, your product owner and ScrumMasters need training. The team also needs to learn to say no. Scope Decrease Scope decreases are just as bad as scope increases. Usually, graphs above show that the team did a poor job of estimating their stories and part way through had to reduce scope to change the iteration. This will happen once in a while, but if you find it’s a pattern on your team, you need to re-evaluate planning. Some teams are hopelessly optimistic. In those cases, I’ll introduce a task I call “Uncertainty.” With Uncertainty, the team estimates how many hours they might need if things don’t go well with the tasks they’ve defined. They try to estimate things that could go poorly and increase the time appropriately. Having an Uncertainty task allows them to have a low and high estimate. Uncertainty should not just be an arbitrary buffer. It must correlate to real uncertainty in the tasks that have been defined. Stories are too Big Often, we see graphs like the ones above. Note that the burndown looks fairly good, other than the chunky acceptance of stories. However, when you look at cumulative flow, you can see that at one point, everything is in progress. This is a bad thing. When you see graphs like this, you’re in one of two states. You may just have a very small team and can only handle one or two stories in your iteration. If you have more than one or two people, then the most likely problem is that your stories are far too big. To combat this, break large high hour stories into smaller pieces that can be completed independently and accepted independently. If you don’t, you’ll likely be requiring your testers to do heroic things to complete testing on the last day of the iteration and you’re much more likely to have the entire iteration fail, because of the limited amount of things that can be completed. Summary There are other charts that can be useful when doing scrum. If you don’t have any big visible charts, you really need to evaluate your process and change. These charts can provide the team a wealth of information and help you write better software. If you have any questions about charts that you’re seeing on your team, contact me with a screen capture of the charts and I’ll tell you what I’m seeing in those charts. I always want this information to be useful, so please let me know if you have other questions. Technorati Tags: Agile

  Read the article

• CodePlex Daily Summary for Sunday, September 02, 2012

  CodePlex Daily Summary for Sunday, September 02, 2012Popular ReleasesThisismyusername's codeplex page.: HTML5 Multitouch Example - Fruit Ninja in HTML5: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. This example isn't responsive enough, so I will be working on that, and it doesn't have great graphics, either. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but here the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixRuminate XNA 4.0 GUI: Release 1.1.1: Fixed bugs with Slider and TextBox. Added ComboBox.Confuser: Confuser build 76542: This is a build of changeset 76542.SharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0.0901.1830 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install ...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....New ProjectsATSV: this is a student project for making a new silverlight UI Bookmark Collector: This project is a best practice example of how to use content items in DotNetNuke. It allows you to quickly and easily manage a listing of external links.BPVotingmachine: BP Vote SystemClean My Space: Sort your files in a fun and fast! With Clean My Space you can!CutePlatform: CutePlatform is a platform game based around the PlanetCute graphics pack from Daniel cook, make him a visit in www.lostgardem.comDancTeX: This project is targeting the integration of LaTeX into VisusalStudio. Epi Info™ Companion for Android: A mobile companion to the Epi Info™ 7 desktop tool for epidemiologic data collection and analysis.Flucene: Object Document Mapper for Lucene.Netfluentserializer: FluentSerializer is a library for .NET usable to create serialize/deserialize data through its fluent interface. The methods it creates are compiled.hongjiapp: hongjiappidealthings educational comprehensive administration system: ?????????????????????????????????????????????.Java Accounting Library: The project aims at providing a Financial Accounting Java Library which may be integrated to any other Java Application independent of its Backend Database.mycnblogs: mycnblogsNETPack: Lightweight and flexible packer for .NETRandom Useful Code: This project is where I will store various useful classes I have built over time. Only the code will be provided, no Library or the like.Suleymaniye Tavimi: Namaz vakitleri hesaplama uygulamasidir. Istenilen yer için hesaplama yapar.

  Read the article

• Evaluating Solutions to Manage Product Compliance? Don't Wait Much Longer

  - by Kerrie Foy

  Depending on severity, product compliance issues can cause all sorts of problems from run-away budgets to business closures. But effective policies and safeguards can create a strong foundation for innovation, productivity, market penetration and competitive advantage. If you’ve been putting off a systematic approach to product compliance, it is time to reconsider that decision, or indecision. Why now?  No matter what industry, companies face a litany of worldwide and regional regulations that require proof of product compliance and environmental friendliness for market access.  For example, Restriction of Hazardous Substances (RoHS) is a regulation that restricts the use of six dangerous materials used in the manufacture of electronic and electrical equipment.  ROHS was originally adopted by the European Union in 2003 for implementation in 2006, and it has evolved over time through various regional versions for North America, China, Japan, Korea, Norway and Turkey.  In addition, the RoHS directive allowed for material exemptions used in Medical Devices, but that exemption ends in 2014.   Additional regulations worth watching are the Battery Directive, Waste Electrical and Electronic Equipment (WEEE), and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives.  Additional evolving regulations are coming from governing bodies like the Food and Drug Administration (FDA) and the International Organization for Standardization (ISO). Corporate sustainability initiatives are also gaining urgency and influencing product design. In a survey of 405 corporations in the Global 500 by Carbon Disclosure Project, co-written by PwC (CDP Global 500 Climate Change Report 2012 entitled Business Resilience in an Uncertain, Resource-Constrained World), 48% of the respondents indicated they saw potential to create new products and business services as a response to climate change. Just 21% reported a dedicated budget for the research. However, the report goes on to explain that those few companies are winning over new customers and driving additional profits by exploiting their abilities to adapt to environmental needs. The article cites Dell as an example – Dell has invested in research to develop new products designed to reduce its customers’ emissions by more than 10 million metric tons of CO2e per year. This reduction in emissions should save Dell’s customers over $1billion per year as a result! Over time we expect to see many additional companies prove that eco-design provides marketplace benefits through differentiation and direct customer value. How do you meet compliance requirements and also successfully invest in eco-friendly designs? No doubt companies struggle to answer this question. After all, the journey to get there may involve transforming business models, go-to-market strategies, supply networks, quality assurance policies and compliance processes per the rapidly evolving global and regional directives. There may be limited executive focus on the initiative, inability to quantify noncompliance, or not enough resources to justify investment. To make things even more difficult to address, compliance responsibility can be a passionate topic within an organization, making the prospect of change on an enterprise scale problematic and time-consuming. Without a single source of truth for product data and without proper processes in place, ensuring product compliance burgeons into a crushing task that is cost-prohibitive and overwhelming to an organization. With all the overhead, certain markets or demographics become simply inaccessible. Therefore, the risk to consumer goodwill and satisfaction, revenue, business continuity, and market potential is too great not to solve the compliance challenge. Companies are beginning to adapt and even thrive in today’s highly regulated and transparent environment by implementing systematic approaches to product compliance that are more than functional bandages but revenue-generating engines. Consider partnering with Oracle to help you address your compliance needs. Many of the world’s most innovative leaders and pioneers are leveraging Oracle’s Agile Product Lifecycle Management (PLM) portfolio of enterprise applications to manage the product value chain, centralize product data, automate processes, and launch more eco-friendly products to market faster.   Particularly, the Agile Product Governance & Compliance (PG&C) solution provides out-of-the-box functionality to integrate actionable regulatory information into the enterprise product record from the ideation to the disposal/recycling phase. Agile PG&C makes it possible to efficiently manage compliance per corporate green initiatives as well as regional and global directives. Options are critical, but so is ease-of-use. Anyone who’s grappled with compliance policy knows legal interpretation plays a major role in determining how an organization responds to regulation. Agile PG&C gives you the freedom to configure product compliance per your needs, while maintaining rigorous control over the product record in an easy-to-use interface that facilitates adoption efforts. It allows you to assign regulations as specifications for a part or BOM roll-up. Each specification has a threshold value that alerts you to a non-compliance issue if the threshold value is exceeded. Set however many regulations as specifications you need to make sure a product can be sold in your target countries. Another option is to implement like one of our leading consumer electronics customers and define your own “catch-all” specification to ensure compliance in all markets. You can give your suppliers secure access to enter their component data or integrate a third party’s data. With Agile PG&C you are able to design compliance earlier into your products to reduce cost and improve quality downstream when stakes are higher. Agile PG&C is a comprehensive solution that makes product compliance more reliable and efficient. Throughout product lifecycles, use the solution to support full material disclosures, efficiently manage declarations with your suppliers, feed compliance data into a corrective action if a product must be changed, and swiftly satisfy audits by showing all due diligence tracked in one solution. Given the compounding regulation and consumer focus on urgent environmental issues, now is the time to act. Implementing an enterprise, systematic approach to product compliance is a competitive investment. From the start, Agile Product Governance & Compliance enables companies to confidently design for compliance and sustainability, reduce the cost of compliance, minimize the risk of business interruption, deliver responsible products, and inspire new innovation.  Don’t wait any longer! To find out more about Agile Product Governance & Compliance download the data sheet, contact your sales representative, or call Oracle at 1-800-633-0738. Many thanks to Shane Goodwin, Senior Manager, Oracle Agile PLM Product Management, for contributions to this article. 

  Read the article

• Master Data

  - by david.butler(at)oracle.com

  Let's take a deeper look at what we mean when we talk about 'Master' data. In its most general sense, master data is data that exists in more than one operational application. These are the applications that automate business processes. These applications require significant amounts of data to function correctly.  This includes data about the objects that are involved in transactions, as well as the transaction data itself.  For example, when a customer buys a product, the transaction is managed by a sales application.  The objects of the transaction are the Customer and the Product.  The transactional data is the time, place, price, discount, payment methods, etc. used at the point of sale. Many thousands of transactional data attributes are needed within the application. These important data elements are local to the applications and have no bearing on other applications. Harmonization and synchronization across applications is not necessary. The Customer and Product objects of the transaction also have a large number of attributes. Customer for example, includes hierarchies, hierarchical and matrixed relationships, contacts, classifications, preferences, accounts, identifiers, profiles, and addresses galore for 'ship to', 'mail to'; 'service at'; etc. Dozens of attributes exist for individuals, hundreds for organizations, and thousands for products. This data has meaning beyond any particular application. It exists in many applications and drives the vital cross application enterprise business processes. These are the processes that define and differentiate the organization. At every decision point, information about the objects of the process determines the direction of the process flow. This is the nature of the data that exists in more than one application, and this is why we call it 'master data'. Let me elaborate. Parties Oracle has developed a party schema to model all participants in your daily business operations. It models people, organizations, groups, customers, contacts, employees, and suppliers. It models their accounts, locations, classifications, and preferences.  And most importantly, it models the vast array of hierarchical and matrixed relationships that exist between all the participants in your real world operations.  The model logically separates people and organizations from their relationships and accounts.  This separation creates flexibility unmatched in the industry and accounts for the fact that the Oracle schema for Customers, Suppliers, and Accounts is a true superset of the wide variety of commercial and homegrown customer models in existence. Sites Sites are places where business is conducted. They can be addresses, clusters such as retail malls, locations within a cluster, floors within a building, places where meters are located, rooms on floors, etc.  Fully understanding all attributes of a site is key to many business processes. Attributes such as 'noise abatement policy' at a point of delivery, or the size of an oven in a business kitchen drive day-to-day activities such as delivery schedules or food promotions. Typically this kind of data is siloed in departments and scattered across applications and spreadsheets.  This leads to conflicting information and poor operational efficiencies. Oracle's Global Single Schema can hold all site attributes in one place and enables a single version of authoritative site information across the enterprise. Products and Services The Oracle Global Single Schema also includes a number of entities that define the products and services a company creates and offers for sale. Key entities include Items organized into Catalogs and Price Lists. The Catalog structures provide for the ability to capture different views of a product such as engineering, manufacturing, and service which are based on a unified product model. As a result, designers, manufacturing engineers, purchasers and partners can work simultaneously on a common product definition. The Catalog schema allows for unlimited attributes, combines them into meaningful groups, and maps them to catalog categories to track these different types of information. The model also maps an unlimited number of functional structures for each item. For example, multiple Bills of Material (BOMs) can be constructed representing requirements BOM, features BOM, and packaging BOM for an item. The Catalog model also supports hierarchical information about each item and all standard Global Data Synchronization attributes. Business Processes Utilizing Linked Data Entities Each business entity codified into a centralized master data environment significantly improves the efficiency of the automated business processes that use the consolidated data.  When all the key business entities used by an organization's process are so consolidated, the advantages are multiplied.  The primary reason for business process breakdowns (i.e. data errors across application boundaries) is eliminated. All processes are positively impacted and business process automation is itself automated.  I like to use the "Call to Resolution" business process as an example to help illustrate this important point. It involves call center applications, service applications, RMA applications, transportation applications, inventory applications, etc. Customer, Site, Product and Supplier master data must all be correct and consistent across these applications.  What's more, the data relationships between customer and product, and product and suppliers must be right. This is the minimum quality needed to insure the business process flows without error. But that is not the end of the story. Critical master data attributes such as customer loyalty, profitability, credit worthiness, and propensity to buy can optimize the call center point of contact component of the process. Critical product information such as alternative parts or equivalent products can optimize the resolution selected by the process. A comprehensive understanding of the 'service at' location can help insure multiple trips are avoided in the process. Full supplier information on reliability, delivery delays, and potential alternates can prevent supplier exceptions and play a significant role in optimizing the process.  In other words, these master data attributes enable the optimization of the "Call to Resolution" enterprise business process. Master data supports and guides business process flows. Thus the phrase 'Master Data' is indeed appropriate. MDM is the software that houses, manages, and governs the master data that resides in all applications and controls the enterprise business processes. A complete master data solution takes a data model that holds fully attributed master data entities and their inter-relationships. Oracle has this model. Oracle, with its deep understanding of application data is the logical choice for managing all your master data within the enterprise whether or not your organization actually runs any Oracle Applications.

  Read the article

• Set Context User Principal for Customized Authentication in SignalR

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/05/27/set-context-user-principal-for-customized-authentication-in-signalr.aspxCurrently I'm working on a single page application project which is built on AngularJS and ASP.NET WebAPI. When I need to implement some features that needs real-time communication and push notifications from server side I decided to use SignalR. SignalR is a project currently developed by Microsoft to build web-based, read-time communication application. You can find it here. With a lot of introductions and guides it's not a difficult task to use SignalR with ASP.NET WebAPI and AngularJS. I followed this and this even though it's based on SignalR 1. But when I tried to implement the authentication for my SignalR I was struggled 2 days and finally I got a solution by myself. This might not be the best one but it actually solved all my problem.   In many articles it's said that you don't need to worry about the authentication of SignalR since it uses the web application authentication. For example if your web application utilizes form authentication, SignalR will use the user principal your web application authentication module resolved, check if the principal exist and authenticated. But in my solution my ASP.NET WebAPI, which is hosting SignalR as well, utilizes OAuth Bearer authentication. So when the SignalR connection was established the context user principal was empty. So I need to authentication and pass the principal by myself.   Firstly I need to create a class which delivered from "AuthorizeAttribute", that will takes the responsible for authenticate when SignalR connection established and any method was invoked. 1: public class QueryStringBearerAuthorizeAttribute : AuthorizeAttribute 2: { 3: public override bool AuthorizeHubConnection(HubDescriptor hubDescriptor, IRequest request) 4: { 5: } 6:  7: public override bool AuthorizeHubMethodInvocation(IHubIncomingInvokerContext hubIncomingInvokerContext, bool appliesToMethod) 8: { 9: } 10: } The method "AuthorizeHubConnection" will be invoked when any SignalR connection was established. And here I'm going to retrieve the Bearer token from query string, try to decrypt and recover the login user's claims. 1: public override bool AuthorizeHubConnection(HubDescriptor hubDescriptor, IRequest request) 2: { 3: var dataProtectionProvider = new DpapiDataProtectionProvider(); 4: var secureDataFormat = new TicketDataFormat(dataProtectionProvider.Create()); 5: // authenticate by using bearer token in query string 6: var token = request.QueryString.Get(WebApiConfig.AuthenticationType); 7: var ticket = secureDataFormat.Unprotect(token); 8: if (ticket != null && ticket.Identity != null && ticket.Identity.IsAuthenticated) 9: { 10: // set the authenticated user principal into environment so that it can be used in the future 11: request.Environment["server.User"] = new ClaimsPrincipal(ticket.Identity); 12: return true; 13: } 14: else 15: { 16: return false; 17: } 18: } In the code above I created "TicketDataFormat" instance, which must be same as the one I used to generate the Bearer token when user logged in. Then I retrieve the token from request query string and unprotect it. If I got a valid ticket with identity and it's authenticated this means it's a valid token. Then I pass the user principal into request's environment property which can be used in nearly future. Since my website was built in AngularJS so the SignalR client was in pure JavaScript, and it's not support to set customized HTTP headers in SignalR JavaScript client, I have to pass the Bearer token through request query string. This is not a restriction of SignalR, but a restriction of WebSocket. For security reason WebSocket doesn't allow client to set customized HTTP headers from browser. Next, I need to implement the authentication logic in method "AuthorizeHubMethodInvocation" which will be invoked when any SignalR method was invoked. 1: public override bool AuthorizeHubMethodInvocation(IHubIncomingInvokerContext hubIncomingInvokerContext, bool appliesToMethod) 2: { 3: var connectionId = hubIncomingInvokerContext.Hub.Context.ConnectionId; 4: // check the authenticated user principal from environment 5: var environment = hubIncomingInvokerContext.Hub.Context.Request.Environment; 6: var principal = environment["server.User"] as ClaimsPrincipal; 7: if (principal != null && principal.Identity != null && principal.Identity.IsAuthenticated) 8: { 9: // create a new HubCallerContext instance with the principal generated from token 10: // and replace the current context so that in hubs we can retrieve current user identity 11: hubIncomingInvokerContext.Hub.Context = new HubCallerContext(new ServerRequest(environment), connectionId); 12: return true; 13: } 14: else 15: { 16: return false; 17: } 18: } Since I had passed the user principal into request environment in previous method, I can simply check if it exists and valid. If so, what I need is to pass the principal into context so that SignalR hub can use. Since the "User" property is all read-only in "hubIncomingInvokerContext", I have to create a new "ServerRequest" instance with principal assigned, and set to "hubIncomingInvokerContext.Hub.Context". After that, we can retrieve the principal in my Hubs through "Context.User" as below. 1: public class DefaultHub : Hub 2: { 3: public object Initialize(string host, string service, JObject payload) 4: { 5: var connectionId = Context.ConnectionId; 6: ... ... 7: var domain = string.Empty; 8: var identity = Context.User.Identity as ClaimsIdentity; 9: if (identity != null) 10: { 11: var claim = identity.FindFirst("Domain"); 12: if (claim != null) 13: { 14: domain = claim.Value; 15: } 16: } 17: ... ... 18: } 19: } Finally I just need to add my "QueryStringBearerAuthorizeAttribute" into the SignalR pipeline. 1: app.Map("/signalr", map => 2: { 3: // Setup the CORS middleware to run before SignalR. 4: // By default this will allow all origins. You can 5: // configure the set of origins and/or http verbs by 6: // providing a cors options with a different policy. 7: map.UseCors(CorsOptions.AllowAll); 8: var hubConfiguration = new HubConfiguration 9: { 10: // You can enable JSONP by uncommenting line below. 11: // JSONP requests are insecure but some older browsers (and some 12: // versions of IE) require JSONP to work cross domain 13: // EnableJSONP = true 14: EnableJavaScriptProxies = false 15: }; 16: // Require authentication for all hubs 17: var authorizer = new QueryStringBearerAuthorizeAttribute(); 18: var module = new AuthorizeModule(authorizer, authorizer); 19: GlobalHost.HubPipeline.AddModule(module); 20: // Run the SignalR pipeline. We're not using MapSignalR 21: // since this branch already runs under the "/signalr" path. 22: map.RunSignalR(hubConfiguration); 23: }); On the client side should pass the Bearer token through query string before I started the connection as below. 1: self.connection = $.hubConnection(signalrEndpoint); 2: self.proxy = self.connection.createHubProxy(hubName); 3: self.proxy.on(notifyEventName, function (event, payload) { 4: options.handler(event, payload); 5: }); 6: // add the authentication token to query string 7: // we cannot use http headers since web socket protocol doesn't support 8: self.connection.qs = { Bearer: AuthService.getToken() }; 9: // connection to hub 10: self.connection.start(); Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Instructions on how to configure a WebLogic Cluster and use it with Oracle Http Server

  - by Laurent Goldsztejn

  On October 17th I delivered a webcast on WebLogic Clustering that included a demo with Apache as the proxy server.  I realized that many steps are needed to set up the configuration I used during the demo.  The purpose of this article is to go through these steps to show how quickly and easily one can define a new cluster and then proxy requests via an Oracle Http Server (OHS). The domain configuration wizard offers the option to create a cluster.  The administration console or WLST, the Weblogic scripting tool can also be used to define a new cluster.  It can be created at any time but the servers that will participate in it cannot be in a running state. Cluster Creation using the configuration wizard Network and architecture requirements need to be considered while choosing between unicast and multicast. Multicast Vs. Unicast with WebLogic Clustering is of great help to make the best decision between the two messaging modes.  In addition, Configure Cluster offers details on each single field displayed above. After this initial configuration page, individual servers could be assigned to this newly created cluster although servers can be added later to the cluster.  What is not recommended is for the Admin server to participate in a cluster as the main purpose of the Admin server is to perform the bulk of the processing for the domain.  Servers need to stop before being assigned to a cluster.  There is also no minimum number of servers that have to participate in the cluster. At this point the configuration should be done and the cluster created successfully.  This can easily be verified from the console. Each clustered managed server can be launched to join the cluster.   At startup the following messages should be logged for each clustered managed server: <Notice> <WeblogicServer> <BEA-000365> <Server state changed to STARTING> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using messaging_mode cluster messaging> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_name>  It's time to try sending requests to the cluster and we will do this with the help of Oracle Http Server to play the role of a proxy server to demonstrate load balancing.  Proxy Server configuration  The first step is to download Weblogic Server Web Server Plugin that will enhance the web server by handling requests aimed at being sent to the Weblogic cluster.  For our test Oracle Http Server (OHS) will be used.  However plug-ins are also available for Apache Http server, Microsoft Internet Information Server (IIS), Oracle iPlanet Webserver or even WebLogic Server with the HttpClusterServlet. Once OHS is installed on the system, the configuration file, mod_wl_ohs.conf, will need to be altered to include Weblogic proxy specifics. First of all, add the following directive to instruct Apache to load the Weblogic shared object module extracted from the plugins file just downloaded. LoadModule weblogic_module modules/mod_wl_ohs.so and then create an IfModule directive to encapsulate the following location block so that proxy will be enabled by path (each request including /wls will be directed directly to the WebLogic Cluster).  You could also proxy requests by MIME type using MatchExpression in the Location block. <IfModule weblogic_module> <Location /wls>    SetHandler weblogic-handler    PathTrim /wls    WebLogicCluster MS1_URL:port,MS2_URL:port    Debug ON    WLLogFile        c:/tmp/global_proxy.log     WLTempDir        "c:/myTemp"    DebugConfigInfo  On </Location> </IfModule> SetHandler specifies the handler for the plug-in module  PathTrim will instruct the plug-in to trim /w ls from the URL before forwarding the request to the cluster. The list of WebLogic Servers defined in WeblogicCluster could contain a mixed set of clustered and single servers.  However, the dynamic list returned for this parameter will only contain valid clustered servers and may contain more servers if not all clustered servers are listed in WeblogicCluster. Testing proxy and load balancing It's time to start OHS web server which should at this point be configured correctly to proxy requests to the clustered servers.  By default round-robin is the load balancing strategy set by WebLogic. Testing the load balancing can be easily done by disabling cookies on your browser given that a request containing a cookie attempts to connect to the primary server. If that attempt fails, the plug-in attempts to make a connection to the next available server in the list in a round-robin fashion.  With cookies enabled, you could use two different browsers to test the load balancing with a JSP page that contains the following: <%@ page contentType="text/html; charset=iso-8859-1" language="java"  %>  <%  String path = request.getContextPath();   String getProtocol=request.getScheme();   String getDomain=request.getServerName();   String getPort=Integer.toString(request.getLocalPort());   String getPath = getProtocol+"://"+getDomain+":"+getPort+path+"/"; %> <html> <body> Receiving Server <%=getPath%> </body> </html>  Assuming that you name the JSP page Test.jsp and the webapp that contains it TestApp, your browsers should open the following URL: http://localhost/wls/TestApp/Test.jsp  Each browser should connect to a different clustered server and this simple JSP should confirm that.  The webapp that contains the JSP needs to be deployed to the cluster. You can also verify that the load is correctly balanced by looking at the proxy log file.  Each request generates a set of log entries that starts with : timestamp ================New Request: Each request is associated with a primary server and a secondary server if one is available.  For our test request, the following entries should appear in the log as well:Using Uri /wls/TestApp/Test.jsp After trimming path: '/TestApp/Test.jsp' The final request string is '/TestApp/Test.jsp' If an exception occurs, it should also be logged in the proxy log file with the prefix:timestamp *******Exception type   WeblogicBridgeConfig DebugConfigInfo enables runtime statistics and the production of configuration information.  For security purposes, this parameter should be turned off in production. http://webserver_host:port/path/xyz.jsp?__WebLogicBridgeConfig will display a proxy bridge page detailing the plugin configuration followed by runtime statistics which could help in diagnosing issues along with the analyzing of the proxy log file.  In our example the url would be: http://localhost/wls/TestApp/Test.jsp?__WebLogicBridgeConfig  Here is how the top section of the screen can look like: The bottom part of the page contains runtime statistics, here is a snippet of it (unrelated with the previous JSP example).   This entire plugin configuration should be very similar with other web servers, what varies is the name of the proxy server configuration file. So, as you can see, it only takes a few minutes to configure a Weblogic cluster and get servers to join it. 

  Read the article

• Securing an ADF Application using OES11g: Part 1

  - by user12587121

  Future releases of the Oracle stack should allow ADF applications to be secured natively with Oracle Entitlements Server (OES). In a sequence of postings here I explore one way to achive this with the current technology, namely OES 11.1.1.5 and ADF 11.1.1.6. ADF Security Basics ADF Bascis The Application Development Framework (ADF) is Oracle’s preferred technology for developing GUI based Java applications.  It can be used to develop a UI for Swing applications or, more typically in the Oracle stack, for Web and J2EE applications.  ADF is based on and extends the Java Server Faces (JSF) technology.  To get an idea, Oracle provides an online demo to showcase ADF components. ADF can be used to develop just the UI part of an application, where, for example, the data access layer is implemented using some custom Java beans or EJBs.  However ADF also has it’s own data access layer, ADF Business Components (ADF BC) that will allow rapid integration of data from data bases and Webservice interfaces to the ADF UI component.   In this way ADF helps implement the MVC  approach to building applications with UI and data components. The canonical tutorial for ADF is to open JDeveloper, define a connection to a database, drag and drop a table from the database view to a UI page, build and deploy.  One has an application up and running very quickly with the ability to quickly integrate changes to, for example, the DB schema. ADF allows web pages to be created graphically and components like tables, forms, text fields, graphs and so on to be easily added to a page.  On top of JSF Oracle have added drag and drop tooling with JDeveloper and declarative binding of the UI to the data layer, be it database, WebService or Java beans.  An important addition is the bounded task flow which is a reusable set of pages and transitions.   ADF adds some steps to the page lifecycle defined in JSF and adds extra widgets including powerful visualizations. It is worth pointing out that the Oracle Web Center product (portal, content management and so on) is based on and extends ADF. ADF Security ADF comes with it’s own security mechanism that is exposed by JDeveloper at development time and in the WLS Console and Enterprise Manager (EM) at run time. The security elements that need to be addressed in an ADF application are: authentication, authorization of access to web pages, task-flows, components within the pages and data being returned from the model layer. One  typically relies on WLS to handle authentication and because of this users and groups will also be handled by WLS.  Typically in a Dev environment, users and groups are stored in the WLS embedded LDAP server. One has a choice when enabling ADF security (Application->Secure->Configure ADF Security) about whether to turn on ADF authorization checking or not: In the case where authorization is enabled for ADF one defines a set of roles in which we place users and then we grant access to these roles to the different ADF elements (pages or task flows or elements in a page). An important notion here is the difference between Enterprise Roles and Application Roles. The idea behind an enterprise role is that is defined in terms of users and LDAP groups from the WLS identity store.  “Enterprise” in the sense that these are things available for use to all applications that use that store.  The other kind of role is an Application Role and the idea is that  a given application will make use of Enterprise roles and users to build up a set of roles for it’s own use.  These application roles will be available only to that application.   The general idea here is that the enterprise roles are relatively static (for example an Employees group in the LDAP directory) while application roles are more dynamic, possibly depending on time, location, accessed resource and so on.  One of the things that OES adds that is that we can define these dynamic membership conditions in Role Mapping Policies. To make this concrete, here is how, at design time in Jdeveloper, one assigns these rights in Jdeveloper, which puts them into a file called jazn-data.xml: When the ADF app is deployed to a WLS this JAZN security data is pushed to the system-jazn-data.xml file of the WLS deployment for the policies and application roles and to the WLS backing LDAP for the users and enterprise roles.  Note the difference here: after deploying the application we will see the users and enterprise roles show up in the WLS LDAP server.  But the policies and application roles are defined in the system-jazn-data.xml file.  Consult the embedded WLS LDAP server to manage users and enterprise roles by going to the domain console and then Security Realms->myrealm->Users and Groups: For production environments (or in future to share this data with OES) one would then perform the operation of “reassociating” this security policy and application role data to a DB schema (or an LDAP).  This is done in the EM console by reassociating the Security Provider.  This blog posting has more explanations and references on this reassociation process. If ADF Authentication and Authorization are enabled then the Security Policies for a deployed application can be managed in EM.  Our goal is to be able to manage security policies for the applicaiton rather via OES and it's console. Security Requirements for an ADF Application With this package tour of ADF security we can see that to secure an ADF application with we would expect to be able to take care of at least the following items: Authentication, including a user and user-group store Authorization for page access Authorization for bounded Task Flow access.  A bounded task flow has only one point of entry and so if we protect that entry point by calling to OES then all the pages in the flow are protected.  Authorization for viewing data coming from the data access layer In the next posting we will describe a sample ADF application and required security policies. References ADF Dev Guide: Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework: Enabling ADF Security in a Fusion Web Application Oracle tutorial on securing a sample ADF application, appears to require ADF 11.1.2 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Oracle Identity Manager Role Management With API

  - by mustafakaya

  As an administrator, you use roles to create and manage the records of a collection of users to whom you want to permit access to common functionality, such as access rights, roles, or permissions. Roles can be independent of an organization, span multiple organizations, or contain users from a single organization. Using roles, you can: View the menu items that the users can access through Oracle Identity Manager Administration Web interface. Assign users to roles. Assign a role to a parent role Designate status to the users so that they can specify defined responses for process tasks. Modify permissions on data objects. Designate role administrators to perform actions on roles, such as enabling members of another role to assign users to the current role, revoke members from current role and so on. Designate provisioning policies for a role. These policies determine if a resource object is to be provisioned to or requested for a member of the role. Assign or remove membership rules to or from the role. These rules determine which users can be assigned/removed as direct membership to/from the role.  In this post, i will share some examples for role management with Oracle Identity Management API.  You can do role operations you can use Thor.API.Operations.tcGroupOperationsIntf interface. tcGroupOperationsIntf service =  getClient().getService(tcGroupOperationsIntf.class);     Assign an user to role :    public void assignRoleByUsrKey(String roleName, String usrKey) throws Exception {         Map<String, String> filter = new HashMap<String, String>();         filter.put("Groups.Role Name", roleName);         tcResultSet role = service.findGroups(filter);         String groupKey = role.getStringValue("Groups.Key");         service.addMemberUser(Long.parseLong(groupKey), Long.parseLong(usrKey));     }  Revoke an user from role:     public void revokeRoleByUsrKey(String roleName, String usrKey) throws Exception {         Map<String, String> filter = new HashMap<String, String>();         filter.put("Groups.Role Name", roleName);         tcResultSet role = service.findGroups(filter);         String groupKey = role.getStringValue("Groups.Key");         service.removeMemberUser(Long.parseLong(groupKey), Long.parseLong(usrKey));     } Get all members of a role :      public List<User> getRoleMembers(String roleName) throws Exception {         List<User> userList = new ArrayList<User>();         Map<String, String> filter = new HashMap<String, String>();         filter.put("Groups.Role Name", roleName);         tcResultSet role = service.findGroups(filter);       String groupKey = role.getStringValue("Groups.Key");         tcResultSet members = service.getAllMemberUsers(Long.parseLong(groupKey));         for (int i = 0; i < members.getRowCount(); i++) {                 members.goToRow(i);                 long userKey = members.getLongValue("Users.Key");                 User member = oimUserManager.findUserByUserKey(String.valueOf(userKey));                 userList.add(member);         }        return userList;     } About me: Mustafa Kaya is a Senior Consultant in Oracle Fusion Middleware Team, living in Istanbul. Before coming to Oracle, he worked in teams developing web applications and backend services at a telco company. He is a Java technology enthusiast, software engineer and addicted to learn new technologies,develop new ideas. Follow Mustafa on Twitter,Connect on LinkedIn, and visit his site for Oracle Fusion Middleware related tips.

  Read the article

• 5 Best Practices - Laying the Foundation for WebCenter Projects

  - by Kellsey Ruppel

  Today’s guest post comes from Oracle WebCenter expert John Brunswick. John specializes in enterprise portal and content management solutions and actively contributes to the enterprise software business community and has authored a series of articles about optimal business involvement in portal, business process management and SOA development, examining ways of helping organizations move away from monolithic application development. We’re happy to have John join us today! Maximizing success with Oracle WebCenter portal requires a strategic understanding of Oracle WebCenter capabilities.  The following best practices enable the creation of portal solutions with minimal resource overhead, while offering the greatest flexibility for progressive elaboration. They are inherently project agnostic, enabling a strong foundation for future growth and an expedient return on your investment in the platform.  If you are able to embrace even only a few of these practices, you will materially improve your deployment capability with WebCenter. 1. Segment Duties Around 3Cs - Content, Collaboration and Contextual Data "Agility" is one of the most common business benefits touted by modern web platforms.  It sounds good - who doesn't want to be Agile, right?  How exactly IT organizations go about supplying agility to their business counterparts often lacks definition - hamstrung by ambiguity. Ultimately, businesses want to benefit from reduced development time to deliver a solution to a particular constituent, which is augmented by as much self-service as possible to develop and manage the solution directly. All done in the absence of direct IT involvement. With Oracle WebCenter's depth in the areas of content management, pallet of native collaborative services, enterprise mashup capability and delegated administration, it is very possible to execute on this business vision at a technical level. To realize the benefits of the platform depth we can think of Oracle WebCenter's segmentation of duties along the lines of the 3 Cs - Content, Collaboration and Contextual Data.  All three of which can have their foundations developed by IT, then provisioned to the business on a per role basis. Content – Oracle WebCenter benefits from an extremely mature content repository.  Work flow, audit, notification, office integration and conversion capabilities for documents (HTML & PDF) make this a haven for business users to take control of content within external and internal portals, custom applications and web sites.  When deploying WebCenter portal take time to think of areas in which IT can provide the "harness" for content to reside, then allow the business to manage any content items within the site, using the content foundation to ensure compliance with business rules and process.  This frees IT to work on more mission critical challenges and allows the business to respond in short order to emerging market needs. Collaboration – Native collaborative services and WebCenter spaces are a perfect match for business users who are looking to enable document sharing, discussions and social networking.  The ability to deploy the services is granular and on the basis of roles scoped to given areas of the system - much like the first C “content”.  This enables business analysts to design the roles required and IT to provision with peace of mind that users leveraging the collaborative services are only able to do so in explicitly designated areas of a site. Bottom line - business will not need to wait for IT, but cannot go outside of the scope that has been defined based on their roles. Contextual Data – Collaborative capabilities are most powerful when included within the context of business data.  The ability to supply business users with decision shaping data that they can include in various parts of a portal or portals, just as they would with content items, is one of the most powerful aspects of Oracle WebCenter.  Imagine a discussion about new store selection for a retail chain that re-purposes existing information from business intelligence services about various potential locations and or custom backend systems - presenting it directly in the context of the discussion.  If there are some data sources that are preexisting in your enterprise take a look at how they can be made into discrete offerings within the portal, then scoped to given business user roles for inclusion within collaborative activities. 2. Think Generically, Execute Specifically Constructs.  Anyone who has spent much time around me knows that I am obsessed with this word.  Why? Because Constructs offer immense power - more than APIs, Web Services or other technical capability. Constructs offer organizations the ability to leverage a platform's native characteristics to offer substantial business functionality - without writing code.  This concept becomes more powerful with the additional understanding of the concepts from the platform that an organization learns over time.  Let's take a look at an example of where an Oracle WebCenter construct can substantially reduce the time to get a subscription-based site out the door and into the hands of the end consumer. Imagine a site that allows members to subscribe to specific disciplines to access information and application data around that various discipline.  A space is a collection of secured pages within Oracle WebCenter.  Spaces are not only secured, but also default content stored within it to be scoped automatically to that space. Taking this a step further, Oracle WebCenter’s Activity Stream surfaces events, discussions and other activities that are scoped to the given user on the basis of their space affiliations.  In order to have a portal that would allow users to "subscribe" to information around various disciplines - spaces could be used out of the box to achieve this capability and without using any APIs or low level technical work to achieve this. 3. Make Governance Work for You Imagine driving down the street without the painted lines on the road.  The rules of the road are so ingrained in our minds, we often do not think about the process, but seemingly mundane lane markers are critical enablers. Lane markers allow us to travel at speeds that would be impossible if not for the agreed upon direction of flow. Additionally and more importantly, it allows people to act autonomously - going where they please at any given time. The return on the investment for mobility is high enough for people to buy into globally agreed up governance processes. In Oracle WebCenter we can use similar enablers to lane markers.  Our goal should be to enable the flow of information and provide end users with the ability to arrive at business solutions as needed, not on the basis of cumbersome processes that cannot meet the business needs in a timely fashion. How do we do this? Just as with "Segmentation of Duties" Oracle WebCenter technologies offer the opportunity to compartmentalize various business initiatives from each other within the system due to constructs and security that are available to use within the platform. For instance, when a WebCenter space is created, any content added within that space by default will be secured to that particular space and inherits meta data that is associated with a folder created for the space. Oracle WebCenter content uses meta data to support a broad range of rich ECM functionality and can automatically impart retention, workflow and other policies automatically on the basis of what has been defaulted for that space. Depending on your business needs, this paradigm will also extend to sub sections of a space, offering some interesting possibilities to enable automated management around content. An example may be press releases within a particular area of an extranet that require a five year retention period and need to the reviewed by marketing and legal before release.  The underlying content system will transparently take care of this process on the basis of the above rules, enabling peace of mind over unstructured data - which could otherwise become overwhelming. 4. Make Your First Project Your Second Imagine if Michael Phelps was competing in a swimming championship, but told right before his race that he had to use a brand new stroke.  There is no doubt that Michael is an outstanding swimmer, but chances are that he would like to have some time to get acquainted with the new stroke. New technologies should not be treated any differently.  Before jumping into the deep end it helps to take time to get to know the new approach - even though you may have been swimming thousands of times before. To quickly get a handle on Oracle WebCenter capabilities it can be helpful to deploy a sandbox for the team to use to share project documents, discussions and announcements in an effort to help the actual deployment get under way, while increasing everyone’s knowledge of the platform and its functionality that may be helpful down the road. Oracle Technology Network has made a pre-configured virtual machine available for download that can be a great starting point for this exercise. 5. Get to Know the Community If you are reading this blog post you have most certainly faced a software decision or challenge that was solved on the basis of a small piece of missing critical information - which took substantial research to discover.  Chances were also good that somewhere, someone had already come across this information and would have been excited to share it. There is no denying the power of passionate, connected users, sharing key tips around technology.  The Oracle WebCenter brand has a rich heritage that includes industry-leading technology and practitioners.  With the new Oracle WebCenter brand, opportunities to connect with these experts has become easier. Oracle WebCenter Blog Oracle Social Enterprise LinkedIn WebCenter Group Oracle WebCenter Twitter Oracle WebCenter Facebook Oracle User Groups Additionally, there are various Oracle WebCenter related blogs by an excellent grouping of services partners.

  Read the article

• NUMA-aware placement of communication variables

  - by Dave

  For classic NUMA-aware programming I'm typically most concerned about simple cold, capacity and compulsory misses and whether we can satisfy the miss by locally connected memory or whether we have to pull the line from its home node over the coherent interconnect -- we'd like to minimize channel contention and conserve interconnect bandwidth. That is, for this style of programming we're quite aware of where memory is homed relative to the threads that will be accessing it. Ideally, a page is collocated on the node with the thread that's expected to most frequently access the page, as simple misses on the page can be satisfied without resorting to transferring the line over the interconnect. The default "first touch" NUMA page placement policy tends to work reasonable well in this regard. When a virtual page is first accessed, the operating system will attempt to provision and map that virtual page to a physical page allocated from the node where the accessing thread is running. It's worth noting that the node-level memory interleaving granularity is usually a multiple of the page size, so we can say that a given page P resides on some node N. That is, the memory underlying a page resides on just one node. But when thinking about accesses to heavily-written communication variables we normally consider what caches the lines underlying such variables might be resident in, and in what states. We want to minimize coherence misses and cache probe activity and interconnect traffic in general. I don't usually give much thought to the location of the home NUMA node underlying such highly shared variables. On a SPARC T5440, for instance, which consists of 4 T2+ processors connected by a central coherence hub, the home node and placement of heavily accessed communication variables has very little impact on performance. The variables are frequently accessed so likely in M-state in some cache, and the location of the home node is of little consequence because a requester can use cache-to-cache transfers to get the line. Or at least that's what I thought. Recently, though, I was exploring a simple shared memory point-to-point communication model where a client writes a request into a request mailbox and then busy-waits on a response variable. It's a simple example of delegation based on message passing. The server polls the request mailbox, and having fetched a new request value, performs some operation and then writes a reply value into the response variable. As noted above, on a T5440 performance is insensitive to the placement of the communication variables -- the request and response mailbox words. But on a Sun/Oracle X4800 I noticed that was not the case and that NUMA placement of the communication variables was actually quite important. For background an X4800 system consists of 8 Intel X7560 Xeons . Each package (socket) has 8 cores with 2 contexts per core, so the system is 8x8x2. Each package is also a NUMA node and has locally attached memory. Every package has 3 point-to-point QPI links for cache coherence, and the system is configured with a twisted ladder "mobius" topology. The cache coherence fabric is glueless -- there's not central arbiter or coherence hub. The maximum distance between any two nodes is just 2 hops over the QPI links. For any given node, 3 other nodes are 1 hop distant and the remaining 4 nodes are 2 hops distant. Using a single request (client) thread and a single response (server) thread, a benchmark harness explored all permutations of NUMA placement for the two threads and the two communication variables, measuring the average round-trip-time and throughput rate between the client and server. In this benchmark the server simply acts as a simple transponder, writing the request value plus 1 back into the reply field, so there's no particular computation phase and we're only measuring communication overheads. In addition to varying the placement of communication variables over pairs of nodes, we also explored variations where both variables were placed on one page (and thus on one node) -- either on the same cache line or different cache lines -- while varying the node where the variables reside along with the placement of the threads. The key observation was that if the client and server threads were on different nodes, then the best placement of variables was to have the request variable (written by the client and read by the server) reside on the same node as the client thread, and to place the response variable (written by the server and read by the client) on the same node as the server. That is, if you have a variable that's to be written by one thread and read by another, it should be homed with the writer thread. For our simple client-server model that means using split request and response communication variables with unidirectional message flow on a given page. This can yield up to twice the throughput of less favorable placement strategies. Our X4800 uses the QPI 1.0 protocol with source-based snooping. Briefly, when node A needs to probe a cache line it fires off snoop requests to all the nodes in the system. Those recipients then forward their response not to the original requester, but to the home node H of the cache line. H waits for and collects the responses, adjudicates and resolves conflicts and ensures memory-model ordering, and then sends a definitive reply back to the original requester A. If some node B needed to transfer the line to A, it will do so by cache-to-cache transfer and let H know about the disposition of the cache line. A needs to wait for the authoritative response from H. So if a thread on node A wants to write a value to be read by a thread on node B, the latency is dependent on the distances between A, B, and H. We observe the best performance when the written-to variable is co-homed with the writer A. That is, we want H and A to be the same node, as the writer doesn't need the home to respond over the QPI link, as the writer and the home reside on the very same node. With architecturally informed placement of communication variables we eliminate at least one QPI hop from the critical path. Newer Intel processors use the QPI 1.1 coherence protocol with home-based snooping. As noted above, under source-snooping a requester broadcasts snoop requests to all nodes. Those nodes send their response to the home node of the location, which provides memory ordering, reconciles conflicts, etc., and then posts a definitive reply to the requester. In home-based snooping the snoop probe goes directly to the home node and are not broadcast. The home node can consult snoop filters -- if present -- and send out requests to retrieve the line if necessary. The 3rd party owner of the line, if any, can respond either to the home or the original requester (or even to both) according to the protocol policies. There are myriad variations that have been implemented, and unfortunately vendor terminology doesn't always agree between vendors or with the academic taxonomy papers. The key is that home-snooping enables the use of a snoop filter to reduce interconnect traffic. And while home-snooping might have a longer critical path (latency) than source-based snooping, it also may require fewer messages and less overall bandwidth. It'll be interesting to reprise these experiments on a platform with home-based snooping. While collecting data I also noticed that there are placement concerns even in the seemingly trivial case when both threads and both variables reside on a single node. Internally, the cores on each X7560 package are connected by an internal ring. (Actually there are multiple contra-rotating rings). And the last-level on-chip cache (LLC) is partitioned in banks or slices, which with each slice being associated with a core on the ring topology. A hardware hash function associates each physical address with a specific home bank. Thus we face distance and topology concerns even for intra-package communications, although the latencies are not nearly the magnitude we see inter-package. I've not seen such communication distance artifacts on the T2+, where the cache banks are connected to the cores via a high-speed crossbar instead of a ring -- communication latencies seem more regular.

  Read the article

• Oracle Enterprise Manager Ops Center : Using Operational Profiles to Install Packages and other Content

  - by LeonShaner

  Oracle Enterprise Manager Ops Center provides numerous ways to deploy content, such as through OS Update Profiles, or as part of an OS Provisioning plan or combinations of those and other "Install Software" capabilities of Deployment Plans.  This short "how-to" blog will highlight an alternative way to deploy content using Operational Profiles. Usually we think of Operational Profiles as a way to execute a simple "one-time" script to perform a basic system administration function, which can optionally be based on user input; however, Operational Profiles can be much more powerful than that.  There is often more to performing an action than merely running a script -- sometimes configuration files, packages, binaries, and other scripts, etc. are needed to perform the action, and sometimes the user would like to leave such content on the system for later use. For shell scripts and other content written to be generic enough to work on any flavor of UNIX, converting the same scripts and configuration files into Solaris 10 SVR4 package, Solaris 11 IPS package, and/or a Linux RPM's might be seen as three times the work, for little appreciable gain.   That is where using an Operational Profile to deploy simple scripts and other generic content can be very helpful.  The approach is so powerful, that pretty much any kind of content can be deployed using an Operational Profile, provided the files involved are not overly large, and it is not necessary to convert the content into UNIX variant-specific formats. The basic formula for deploying content with an Operational Profile is as follows: Begin with a traditional script header, which is a UNIX shell script that will be responsible for decoding and extracting content, copying files into the right places, and executing any other scripts and commands needed to install and configure that content. Include steps to make the script platform-aware, to do the right thing for a given UNIX variant, or a "sorry" message if the operator has somehow tried to run the Operational Profile on a system where the script is not designed to run.  Ops Center can constrain execution by target type, so such checks at this level are an added safeguard, but also useful with the generic target type of "Operating System" where the admin wants the script to "do the right thing," whatever the UNIX variant. Include helpful output to show script progress, and any other informational messages that can help the admin determine what has gone wrong in the case of a problem in script execution.  Such messages will be shown in the job execution log. Include necessary "clean up" steps for normal and error exit conditions Set non-zero exit codes when appropriate -- a non-zero exit code will cause an Operational Profile job to be marked failed, which is the admin's cue to look into the job details for diagnostic messages in the output from the script. That first bullet deserves some explanation.  If Operational Profiles are usually simple "one-time" scripts and binary content is not allowed, then how does the actual content, packages, binaries, and other scripts get delivered along with the script?  More specifically, how does one include such content without needing to first create some kind of traditional package?   All that is required is to simply encode the content and append it to the end of the Operational Profile.  The header portion of the Operational Profile will need to contain the commands to decode the embedded content that has been appended to the bottom of the script.  The header code can do whatever else is needed, and finally clean up any intermediate files that were created during the decoding and extraction of the content. One way to encode binary and other content for inclusion in a script is to use the "uuencode" utility to convert the content into simple base64 ASCII text -- a form that is suitable to be appended to an Operational Profile.   The behavior of the "uudecode" utility is such that it will skip over any parts of the input that do not fit the uuencoded "begin" and "end" clauses.  For that reason, your header script will be skipped over, and uudecode will find your embedded content, that you will uuencode and paste at the end of the Operational Profile.  You can have as many "begin" / "end" clauses as you need -- just separate each embedded file by an empty line between "begin" and "end" clauses. Example:  Install SUNWsneep and set the system serial number Script:  deploySUNWsneep.sh ( <- right-click / save to download) Highlights: #!/bin/sh # Required variables: OC_SERIAL="$OC_SERIAL" # The user-supplied serial number for the asset ... Above is a good practice, showing right up front what kind of input the Operational Profile will require.   The right-hand side where $OC_SERIAL appears in this example will be filled in by Ops Center based on the user input at deployment time. The script goes on to restrict the use of the program to the intended OS type (Solaris 10 or older, in this example, but other content might be suitable for Solaris 11, or Linux -- it depends on the content and the script that will handle it). A temporary working directory is created, and then we have the command that decodes the embedded content from "self" which in scripting terms is $0 (a variable that expands to the name of the currently executing script): # Pass myself through uudecode, which will extract content to the current dir uudecode $0 At that point, whatever content was appended in uuencoded form at the end of the script has been written out to the current directory.  In this example that yields a file, SUNWsneep.7.0.zip, which the rest of the script proceeds to unzip, and pkgadd, followed by running "/opt/SUNWsneep/bin/sneep -s $OC_SERIAL" which is the command that stores the system serial for future use by other programs such as Explorer.   Don't get hung up on the example having used a pkgadd command.  The content started as a zip file and it could have been a tar.gz, or any other file.  This approach simply decodes the file.  The header portion of the script has to make sense of the file and do the right thing (e.g. it's up to you). The script goes on to clean up after itself, whether or not the above was successful.  Errors are echo'd by the script and a non-zero exit code is set where appropriate. Second to last, we have: # just in case, exit explicitly, so that uuencoded content will not cause error OPCleanUP exit # The rest of the script is ignored, except by uudecode # # UUencoded content follows # # e.g. for each file needed, #  $ uuencode -m {source} {source} > {target}.uu5 # then paste the {target}.uu5 files below # they will be extracted into the workding dir at $TDIR # The commentary above also describes how to encode the content. Finally we have the uuencoded content: begin-base64 444 SUNWsneep.7.0.zip UEsDBBQAAAAIAPsRy0Di3vnukAAAAMcAAAAKABUAcmVhZG1lLnR4dFVUCQADOqnVT7up ... VXgAAFBLBQYAAAAAAgACAJEAAADTNwEAAAA= ==== That last line of "====" is the base64 uuencode equivalent of a blank line, followed by "end" and as mentioned you can have as many begin/end clauses as you need.  Just separate each embedded file by a blank line after each ==== and before each begin-base64. Deploying the example Operational Profile looks like this (where I have pasted the system serial number into the required field): The job succeeded, but here is an example of the kind of diagnostic messages that the example script produces, and how Ops Center displays them in the job details: This same general approach could be used to deploy Explorer, and other useful utilities and scripts. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

  Read the article

• Need personal advice on how to get out of a company..

  - by SOfan

  Hi, I am an SO user since past 6 months and this is the first time I am turning to SO for personal help. I have asked technical questions before with my real ID. I am stuck inside a service based IT company for the past one year and haven't been able to decide if to leave it, when to leave it and how to leave it. I had taken 2 weeks LWP on medical reason roughly at end of 1 year and then soon after reporting, I applied for 2 months more LWP (on medical/personal ground) with the intention of working on my health,take up a hobby class to ward off depression,pessimism, to have some fun in life, and to look for a job which I really would be excited about - that interests me and which matches with my strength. My leave starts from this Monday. So in any case, I had hard set in mind that I will leave the company after I join them back hopefully with some job offer already in hand (after figuring out what I want do). Neither I can stand the past project,past colleagues,company, HR, pathetically low salary. But if I really listen to my heart, I don't want to have to go back to that office after my sabbatical and again have to see those people. I will have to resign it after my sabbatical ends. Then HR people perhaps wont like it, may even accuse me on face or behind back that primary purpose of my leave must have been to hunt for a better job and I lied about medical and person reasons. Also, if they get nasty and force me to serve 2 months notice period. There is no way I see myself after sabbatical resuming in old project or starting new work. It will be a pain. Since they have already approved 2 months leave and stuff, ideally if they want, they should be just able to relieve me right on the next day after I join back. But, I don't know if they want to get nasty, will they mention about my 2 months sabbatical leave in my experience letter or more scary, the term medical/personal reason. I have hard earned my experience here, have worked against my will, mostly it has been painful and slogged like anything, because I realize the importance of work experience in IT industry. I don't have greed to have those 2 months included extra in my experience letter, but I don't want to mess up with my experience letter in a way which makes my next employer ask question, get suspicious, or be wary if I have any medical reason going on. Being an emotional,moody person or somebody who can't be in an environment, once my mind and heart starts hating it. I think it perhaps is best, if I resign on Monday itself telling them (in polite manner) something that look I took sabbatical for some reason but I don't want to resume working in the company after my sabbatical ends. So please accept my resignation. Now tell me what you want to do about my leave request, my notice period and when you are willing to relieve me. What should I write and how? Some background: I am working in an IT company in India.I am overqualified in the company. It is grossly underpaying me. My education qualifications far exceed anyone's in the whole company being a CS undergrad as well as a CS grad. I joined this company after finishing the grad. I had self-doubts about my skills and interest as a programmer. I like doing research oriented work, though didn't have any particular success during grad. My life here has been very hectic. The project containing many many sub-projects has kept me on my toes and I have never really liked the work. I have been playing against my strength. Also the company strict internet usage policy (you can't read gmails, can't browse any non-work related sites not even news). When working for a client, from the machine we can't even check company related emails.For this one has to go to kiosk like 5 machines in a small room etc. Most of the times those machines are not available, so it was not unusual to keep making rounds to these kiosk machines to check company emails, browse company related emails etc.So it was not so easy to keep in touch with company related basic affairs for a not particular careful person. Things like this which are new to me, make me feel restricted. I am an undecisive person with a sense of failure, self-doubt, not meeting up unrealistic expectation. Somewhere at back of mind, I envy my classmates who make a smooth transition from company to company without causing any gap in their resume. I on other hand have gaps in resume. I get tired after working in a place for sometime. problem with colleagues in general. I am not particular great with people, have few friends, not known for a fun nature, rather serious, scholar. I am not a typical conventional female. I think females are usually more disciplined. But I am not so. I reach office late (though after informing manager). I don't want to blame them entirely, because from my past, it is not unusual for me to get undecisive on things. Also I had doubts about my ability as researched and to succeed there. of building a relationship in a group, to have something to talk about, newspaper. I get cut-off from people. peer pressure. I make blunders in coding, lose patience. Consciously or unconsciously I feel contempt for people here, work here, environment here. I have doubts that either I go to a place which does innovation, does research oriented work, product biggies, have great motivated people, have competent people passionate about products they are building. But then I also doubt my ability to survive there. I have identified that an idea job for me would be 4 days a week, a high salary job. When among people in company/team, I can't think much. I need some time at home to read good authentic books written in good style on what work I am doing.So that I am comfortable with my understanding of work. I get into pressure easily under deadline and need 5th day to cool myself off. I took for 2 weeks leave, because each day was hell for me. May be the depression phase of bipolar is on and also partially it could be that being a work centered person, who derives happiness,self-esteem from work, haven't been enjoying work and have been working for the sole person of proving stability, and ability to stick, against all odds, and facing what challenges I see, bonding with people, identifying opportunities to learn in given task etc.have been averaging one day LWP in 1 week or 10 days. or may be because of my nature,ADD,not being able to switch context,out of touch with news, don't have a circle of friends with who I enjoy. less knowledge in general to talk about, just some technical stuff.anyway, so due to emotional reason, some practical reason etc, I wanted to be very sure before leaving. So my leave starts from Monday and I should feel happy about it. I have taken the leave to for a few purposes - to take care of my health by regular yoga/exercise (with project on, I just can't do anything regular), reassess myself to see what I want to try next which work I might like, look for next job, take up a hobby which I like say singing. I am not clear on my career,job aspiration. I have tried my hands on research. During this year appraisal yesterday, I even had some conflict with my last manager. In meeting with me one on one, he would say all nice things about me, but in feedback to new manager, he hasn't given any excellent feedback. It is all only good. I am angry at this old Manager. Also new manager also scolded me as I didn't agree to his appraisal and waited to hear myself from old Manager. He kind of scolded me for wasting his time. Am I being unethical somewhere? I am always very conscious of if I am cheating anywhere. What advice I am seeking? How to resign and what to write in resignation letter

  Read the article

• CodePlex Daily Summary for Sunday, September 29, 2013

  CodePlex Daily Summary for Sunday, September 29, 2013Popular ReleasesAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features -------- list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed ----- case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download end...Activity Viewer 2012: Activity Viewer 2012 V 5.0.0.3: Planning to add new features: 1. Import/Export rules 2. Tabular mode multi servers connections.Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...OfflineBrowser: Release v1.2: This release includes some multi-threading support, a better progress bar, more JavaScript fixes, and a help system. This release is also portable (can run with no issues from a flash drive).CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.0.0.34288 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-0-0-34288-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of ...CrmSvcUtil Generate Attribute Constants: Generate Attribute Constants (1.0.5018.28159): Built against version 5.0.15 of the CRM SDK Fixed issue where constant for primary key attribute was being duplicated in all entity classes Added ability to override base class for entity classesC# Intellisense for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.SimpleExcelReportMaker: Serm 0.02: SourceCode and SampleMagick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen v2.1.3.api release: This is for the brave at heart, this is the maint release to update to the new movie api. please send feedback on fix requests.FFXIV Crafting Simulator: Crafting Simulator 2.3: - Major refactoring of the code behind. - Added a current durability and a current CP textbox.DNN CMS Platform: 07.01.02: Major HighlightsAdded the ability to manage the Vanity URL prefix Added the ability to filter members in the member directory by role Fixed issue where the user could inadvertently click the login button multiple times Fixed issues where core classes could not be used in out of process cache provider Fixed issue where profile visibility submenu was not displayed correctly Fixed issue where the member directory was broken when Convert URL to lowercase setting was enabled Fixed issu...Rawr: Rawr 5.4.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Sample MVC4 EF Codefirst Architecture: RazMVCWebApp ver 1.1: Signal R sample is added.CODE Framework: 4.0.30923.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.JayData -The unified data access library for JavaScript: JayData 1.3.2 - Indian Summer Edition: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.2 - Indian Summer Edition For detai...ZXing.Net: ZXing.Net 0.12.0.0: sync with rev. 2892 of the java version new PDF417 decoder improved Aztec decoder global speed improvements direct Kinect support for ColorImageFrame better Structured Append support many other small bug fixes and improvementsNew ProjectsCACHEDB: CLIENT-DATABASE || CLIENT_CACHEDB-DATABASEClassic WiX Burn Theme: A WiX Burn theme inspired by the classic WiX wizard user interface.CryptStr.Fody: A post-build weaver that encrypts literal strings in your .NET assemblies without breaking ClickOnce.Easy Code: A setting framework.EduSoft: This is a school eg.GameStuff: GameStuff is a library of Physics and Geometrics concepts for video game. Nekora Test Project: Nekora test projectPopCorn Console Game: Simple console gameRadioController: This project started from people installing Tablets in Mustangs. You would typically loose most control of the radio. This projects brings that back!Random searcher i pochodne: Wyszukiwarka plików multimedialnych i czego dusza zapragnie.SporkRandom: A .NET (C#, Visual Basic) interface for the true random number generator service of random.org

  Read the article

• Secure Your Wireless Router: 8 Things You Can Do Right Now

  - by Chris Hoffman

  A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

  Read the article

• “It’s only test code…”

  - by Chris George

  “Let me hack this in, it’s only test code”, “Don’t worry about getting it reviewed, it’s only test code”, “It doesn’t have to be elegant or efficient, it’s only test code”… do these phrases sound familiar? Chances are if you’ve working with test automation, at one point or other you will have heard these phrases, you have probably even used them yourself! What is certain is that code written under this “it’s only test code” mantra will come back and bite you in the arse! I’ve recently encountered a case where a test was giving a false positive, therefore hiding a real product bug because that test code was very badly written. Firstly it was very difficult to understand what the test was actually trying to achieve let alone how it was doing it, and this complexity masked a simple logic error. These issues are real and they do happen. Let’s take a step back from this and look at what we are trying to do. We are writing test code that tests product code, and we do this to create a suite of tests that will help protect our software against regressions. This test code is making sure that the product behaves as it should by employing some sort of expected result verification. The simple cases of these are generally not a problem. However, automation allows us to explore more complex scenarios in many more permutations. As this complexity increases then so does the complexity of the test code. It is at this point that code which has not been architected properly will cause problems.   Keep your friends close… So, how do we make sure we are doing it right? The development teams I have worked on have always had Test Engineers working very closely with their Software Engineers. This is something that I have always tried to take full advantage of. They are coding experts! So run your ideas past them, ask for advice on how to structure your code, help you design your data structures. This may require a shift in your teams viewpoint, as contrary to this section title and folklore, Software Engineers are not actually the mortal enemy of Test Engineers. As time progresses, and test automation becomes more and more ingrained in what we do, the two roles are converging more than ever. Over the 16 years I have spent as a Test Engineer, I have seen the grey area between the two roles grow significantly larger. This serves to strengthen the relationship and common bond between the two roles which helps to make test code activities so much easier!   Pair for the win Possibly the best thing you could do to write good test code is to pair program on the task. This will serve a few purposes. you will get the benefit of the Software Engineers knowledge and experience the Software Engineer will gain knowledge on the testing process. Sharing the love is a wonderful thing! two pairs of eyes are always better than one… And so are two brains. Between the two of you, I will guarantee you will derive more useful test cases than if it was just one of you.   Code reviews Another policy which certainly pays dividends is the practice of code reviews. By having one of your peers review your code before you commit it serves two purposes. Firstly, it forces you to explain your code. Just the act of doing this will often pick up errors in your code. Secondly, it gets yet another pair of eyes on your code! I cannot stress enough how important code reviews are. The benefits they offer apply as much to product code as test code. In short, Software and Test Engineers should all be doing them! It can be extended even further by getting test code reviewed by a Software Engineer and a Test Engineer, and likewise product code. This serves to keep both functions in the loop with changes going on within your code base.   Learn from your devs I briefly touched on this earlier but I’d like to go into more detail here. Pairing with your Software Engineers when writing your test code is such an amazing opportunity to improve your coding skills. As I sit here writing this article waiting to be called into court for jury service, it reminds me that it takes a lot of patience to be a Test Engineer, almost as much as it takes to be a juror! However tempting it is to go rushing in and start writing your automated tests, resist that urge. Discuss what you want to achieve then talk through the approach you’re going to take. Then code it up together. I find it really enlightening to ask questions like ‘is there a better way to do this?’ Or ‘is this how you would code it?’ The latter question, especially, is where I learn the most. I’ve found that most Software Engineers will be reluctant to show you the ‘right way’ to code something when writing tests because they perceive the ‘right way’ to be too complicated for the Test Engineer (e.g. not mentioning LINQ and instead doing something verbose). So by asking how THEY would code it, it unleashes their true dev-ness and advanced code usually ensues! I would like to point out, however, that you don’t have to accept their method as the final answer. On numerous occasions I have opted for the more simple/verbose solution because I found the code written by the Software Engineer too advanced and therefore I would find it unreadable when I return to the code in a months’ time! Always keep the target audience in mind when writing clever code, and in my case that is mostly Test Engineers.  

  Read the article

• Getting Started With Tailoring Business Processes

  - by Richard Bingham

  In this article, and for the sake of simplicity, we will use the term “On-Premise” to mean a deployment where you have design-time development access to the instance, including administration of the technology components, the applications filesystem, and the database. In reality this might be a local development instance that is then supported by a team who can deploy your customizations to the restricted production instance equivalents. Tools Overview Firstly let’s look at the Design-Time tools within JDeveloper for customizing and extending the artifacts of a Business Process. In essence this falls into two buckets; SOA Composite Editor for working with BPEL processes, and the BPM Studio. The SOA Composite Editor As a standard extension to JDeveloper, this graphical design tool should be familiar to anyone previously worked with Oracle SOA Server. With easy-to-use modeling capability, backed-up by full XML source-view (for read-only), it provides everything that is needed to implement the technical design. In simple terms, once deployed to the remote SOA Server the composite components (like Mediator) leverage the Event Delivery Network (EDN) for interaction with the application logic. If you are customizing an existing Fusion Applications BPEL process then be aware that it does support MDS-based customization layers just like Page Composer where different customizations are used based on the run-time context, like for a specific Product or Business Unit. This also makes them safe from patching and upgrades, although only a single active version of the composite is available at run-time. This is defined by a field on the composite record, available in Enterprise Manager. Obviously if you wish to fire different activities and tasks based on the user context then you can should include switches to fork the flows in your custom BPEL process. Figure 1 – A BPEL process in Composite Editor The following describes the simplified steps for making customizations to BPEL processes. This is the most common method of changing the business processes of Fusion Applications, as over 400 BPEL-based composite applications are provided out-of-the-box. Setup your local Fusion Applications JDeveloper environment. The SOA Composite Editor should be installed as part of the Fusion Applications extension. If there are problems you can also find it under the ‘Check for Updates’ help menu option. Since SOA Server is not part of the JDeveloper integrated WebLogic Server, setup a standalone WebLogic environment for deploying and testing. Obviously you might use a Fusion Applications development instance also. Package the existing standard Fusion Applications SOA Composite using Enterprise Manager and export it as a complete SOA Archive (SAR) file, resulting in a local .jar file. You may need to ask your system administrator for this. Import the exported SAR .jar file into JDeveloper using the File menu, under the option ‘SOA Archive into SOA Project’. In JDeveloper set the appropriate customization layer values, and then change from the default role to the Fusion Applications Customization Developer role. Make the customizations and save the application project. Finally redeploy the composite application, either to a direct Application Server connection, or as a fresh SAR (jar) file that can then be re-imported and deployed via Enterprise Manager. The Business Process Management (BPM) Suite In addition to the relatively low-level development environment associated with BPEL process creation, Oracle provides a suite of products that allow business process adjustments to be made without the need for some of the programming skills.  The aim is to abstract much of the technical implementation and to provide a Business Analyst tools for immediately implementing organization changes. Obviously there are some limitations on what they can do, however the BPM Suite functionality increases with each release and for the majority of the cases the tools remains as applicable as its developer-orientated sister. At the current time business processes must be explicitly coded to support just one of these use-cases, either BPEL for developer use or BPM for business analyst use. That said, they both run on the same SOA Server in much the same way. The components bundled in each SOA Composite Application can be verified by inspection through Enterprise Manager. Figure 2 – A BPM Process in JDeveloper BPM Suite. BPM processes are written in a standard notation (BPMN) and the modeling tools are very similar to that of BPEL. The steps to deploy a custom BPM process are also essentially much the same, since the BPM process is bundled into a SOA Composite just like a BPEL process. As such the SOA Composite Editor  actually has support for both artifacts and even allows use of them together, such as a calling a BPM process as a partnerlink from a BPEL process. For more details see the references below. Business Analyst Tooling In addition to using JDeveloper extensions for BPM development, there are run-time tools that Business Analysts can use to make adjustments, so that without high costs of an IT project the system can be tuned to match changes to the business operation. The first tool to consider is the BPM Composer, deployed with the middleware SOA Server and accessible online, and for Fusion Applications it is under the Business Process icon on the homepage of the Application Composer. Figure 3 – Business Process Composer showing a CRM process flow. The key difference between this and using JDeveloper is that the BPM Composer has a Business Catalog prepopulated with features and functions that can be used, mostly through registered WebServices. This means no coding or complex interface development is required, simply drag-drop-configure. The items in the business catalog are seeded by either Oracle (as a BPM Template) or added to by your own custom development. You cannot create or generate catalog content from BPM Composer directly. As per the screenshot you can see the Business Catalog content in the BPM Project browser region. In addition, other online tools for use by Business Analysts include the BPM Worklist application for editing business rules and approval management configuration, plus the SOA Composer which focuses on non-approval business rules and domain value maps. At the current time there are only a handful of BPM processes shipped with Fusion Applications HCM and CRM, including on-boarding workers and processing customer registrations.  This also means a limited number of associated BPM Templates provided out-of-the-box, therefore a limited Business Catalog. That said, BPM-based extension is a powerful capability to leverage and will most likely develop going forwards, especially for use in SaaS deployments where full design-time JDeveloper access is not available. Further Reading For BPEL – Fusion Applications Extensibility Guide – Section 12 For BPM – Fusion Applications Extensibility Guide – Section 7 The product-specific documentation and implementation guides for Fusion Applications Fusion Middleware Developers Guide for SOA Suite Modeling and Implementation Guide for Oracle Business Process Management User’s Guide for Oracle Business Process Composer Oracle University courses on BPM Suite and SOA Development

  Read the article

• Oracle B2B - Synchronous Request Reply

  - by cdwright

  Introduction So first off, let me say I didn't create this demo (although I did modify it some). I got it from a member of the B2B development technical staff. Since it came with only a simple readme file, I thought I would take some time and write a more detailed explanation about how it works. Beginning with Oracle SOA Suite PS5 (11.1.1.6), B2B supports synchronous request reply over http using the b2b/syncreceiver servlet. I’m attaching the demo to this blog which includes a SOA composite archive that needs to be deployed using JDeveloper, a B2B repository with two agreements that need to be deployed using the B2B console, and a test xml file that gets sent to the b2b/syncreceiver servlet using your favorite SOAP test tool (I'm using Firefox Poster here). You can download the zip file containing the demo here. The demo works by sending the sample xml request file (req.xml) to http://<b2bhost>:8001/b2b/syncreceiver using the SOAP test tool.  The syncreceiver servlet keeps the socket connection open between itself and the test tool so that it can synchronously send the reply message back. When B2B receives the inbound request message, it is passed to the SOA composite through the default B2B Fabric binding. A simple reply is created in BPEL and returned to B2B which then sends the message back to the test tool using that same socket connection. I’ll show you the B2B configuration first, then we’ll look at the soa composite. Configuring B2B No additional configuration necessary in order to use the syncreceiver servlet. It is already running when you start SOA. After importing the GC_SyncReqRep.zip repository file into B2B, you’ll have the typical GlobalChips host trading partner and the Acme remote trading partner. Document Management The repository contains two very simple custom XML document definitions called Orders and OrdersResponse. In order to determine the trading partner agreement needed to process the inbound Orders document, you need to know two things about it; what is it and where it came from. So let’s look at how B2B identifies the appropriate document definition for the message. The XSD’s for these two document definitions themselves are not particularly interesting. Whenever you're dealing with custom XML documents, B2B identifies the appropriate document definition for each XML message using an XPath Identification Expression. The expression is entered for each of these document definitions under the document administration tab in the B2B console. The full XPATH expression for the Orders document is  //*[local-name()='shiporder']/*[local-name()='shipto']/*[local-name()='name']/text(). You can see this path in the XSD diagram below and how it uniquely identifies this message. The OrdersReponse document is identified in the same way. The XPath expression for it is //*[local-name()='Response']/*[local-name()='Status']/text(). You can see how it’s path differs uniquely identifying the reply from the request. Trading Partner Profile The trading partner profiles are very simple too. For GlobalChips, a generic identifier is being used to identify the sender of the response document using the host trading partner name. For Acme, a generic identifier is also being used to identify the sender of the inbound request using the remote trading partner name. The document types are added for the remote trading partner as usual. So the remote trading partner Acme is the sender of the Orders document, and it is the receiver of the OrdersResponse document. For the remote trading partner only, there needs to be a dummy channel which gets used in the outbound response agreement. The channel is not actually used. It is just a necessary place holder that needs to be there when creating the agreement. Trading Partner Agreement The agreements are equally simple. There is no validation and translation is not an option for a custom XML document type. For the InboundAgreement (request) the document definition is set to OrdersDef. In the Agreement Parameters section the generic identifiers have been added for the host and remote trading partners. That’s all that is needed for the inbound transaction. For the OutboundAgreement (response), the document definition is set to OrdersResponseDef and the generic identifiers for the two trading partners are added. The remote trading partner dummy delivery channel is also added to the agreement. SOA Composite Import the SOA composite archive into JDeveloper as an EJB JAR file. Open the composite and you should have a project that looks like this. In the composite, open the b2bInboundSyncSvc exposed service and advance through the setup wizard. Select your Application Server Connection and advance to the Operations window. Notice here that the B2B binding is set to Receive. It is not set for Synchronous Request Reply. Continue advancing through the wizard as you normally would and select finish at the end. Now open BPELProcess1 in the composite. The BPEL process is set as a Synchronous Request Reply as you can see below. The while loop is there just to give the process something to do. The actual reply message is prepared in the assignResponseValues assignment followed by an Invoke of the B2B binding. Open the replyResponse Invoke and go to the properties tab. You’ll see that the fromTradingPartnerId, toTradingPartner, documentTypeName, and documentProtocolRevision properties have been set. Testing the Configuration To test the configuration, I used Firefox Poster. Enter the URL for the b2b/syncreceiver servlet and browse for the req.xml file that contains the test request message. In the Headers tab, add the property ‘from’ and give it the value ‘Acme’. This is how B2B will know where the message is coming from and it will use that information along with the document type name to find the right trading partner agreement. Now post the message. You should get back a response with a status of ‘200 OK’. That’s all there is to it.

  Read the article

• Webcast Q&A: ING on How to Scale Role Management and Compliance

  - by Tanu Sood

  Thanks to all who attended the live webcast we hosted on ING: Scaling Role Management and Access Certifications to Thousands of Applications on Wed, April 11th. Those of you who couldn’t join us, the webcast replay is now available. Many thanks to our guest speaker, Mark Robison, Enterprise Architect at ING for walking us through ING’s drivers and rationale for the platform approach, the phased implementation strategy, results & metrics, roadmap and recommendations. We greatly appreciate the insight he shared with us all on the deployment synergies between Oracle Identity Manager (OIM) and Oracle Identity Analytics (OIA) to enforce streamlined user and role management and scalable compliance. Mark was also kind enough to walk us through specific solutions features that helped ING manage the problem of role explosion and implement closed loop remediation. Our host speaker, Neil Gandhi, Principal Product Manager, Oracle rounded off the presentation by discussing common use cases and deployment scenarios we see organizations implement to automate user/identity administration and enforce closed-loop scalable compliance. Neil also called out the specific features in Oracle Identity Analytics 11gR1 that cater to expediting and streamlining compliance processes such as access certifications. While we tackled a few questions during the webcast, we have captured the responses to those that we weren’t able to get to here; our sincere thanks to Mark Robison for taking the time to respond to questions specific to ING’s implementation and strategy. Q. Did you include business friendly entitlment descriptions, or is the business seeing application descriptors A. We include very business friendly descriptions.  The OIA tool has the facility to allow this. Q. When doing attestation on job change, who is in the workflow to review and confirm that the employee should continue to have access? Is that a best practice?   A. The new and old manager  are in the workflow.  The tool can check for any Separation of Duties (SOD) violations with both having similiar accesses.  It may not be a best practice, but it is a reality of doing your old and new job for a transition period on a transfer. Q. What versions of OIM and OIA are being used at ING?   A. OIM 11gR1 and OIA 11gR1; the very latest versions available. Q. Are you using an entitlements / role catalog?   A. Yes. We use both roles and entitlements. Q. What specific unexpected benefits did the Identity Warehouse provide ING?   A. The most unanticipated was to help Legal Hold identify user ID's in the various applications.   Other benefits included providing a one stop shop for all aggregated ID information. Q. How fine grained are your application and entitlements? Did OIA, OIM support that level of granularity?   A. We have some very fine grained entitlements, but we role this up into approved Roles to allow for easier management.   For managing very fine grained entitlements, Oracle offers the Oracle Entitlement Server.  We currently do not own this software but are considering it. Q. Do you allow any individual access or is everything truly role based?   A. We are a hybrid environment with roles and individual positive and negative entitlements Q. Did you use an Agile methodology like scrum to deliver functionality during your project? A. We started with waterfall, but used an agile approach to provide benefits after the initial implementation Q. How did you handle rolling out the standard ID format to existing users? A. We just used the standard IDs for new users.  We have not taken on a project to address the existing nonstandard IDs. Q. To avoid role explosion, how do you deal with apps that require more than a couple of entitlement TYPES? For example, an app may have different levels of access and it may need to know the user's country/state to associate them with particular customers.   A. We focus on the functional user and craft the role around their daily job requirements.  The role captures the required application entitlements.  To keep role explosion down, we use role mining in OIA and also meet and interview the business.  It is an iterative process to get role consensus. Q. Great presentation! How many rounds of Certifications has ING performed so far?  A. Around 7 quarters and constant certifications on transfer. Q. Did you have executive support from the top down   A. Yes  The executive support was key to our success. Q. For your cloud instance are you using OIA or OIM as SaaS?  A. No.  We are just provisioning and deprovisioning to various Cloud providers.  (Service Now is an example) Q. How do you ensure a role owner does not get more priviliges as are intended and thus violates another role, e,g, a DBA Roles should not get tor rigt to run somethings as root, as this would affect the root role? A. We have SOD  checks.  Also all Roles are initially approved by external audit and the role owners have to certify the roles and any changes Q. What is your ratio of employees to roles?   A. We are still in process going through our various lines of business, so I do not have a final ratio.  From what we have seen, the ratio varies greatly depending on the Line of Business and the diversity of Job Functions.  For standardized lines of business such as call centers, the ratio is very good where we can have a single role that covers many employees.  For specialized lines of business like treasury, it can be one or two people per role. Q. Is ING using Oracle On Demand service ?   A. No Q. Do you have to implement or migrate to OIM in order to get the Identity Warehouse, or can OIA provide the identity warehouse as well if you haven't reached OIM yet? A. No, OIM deployment is not required to implement OIA’s Identity Warehouse but as you heard during the webcast, there are tremendous deployment synergies in deploying both OIA and OIM together. Q. When is the Security Governor product coming out? A. Oracle Security Governor for Healthcare is available today. Hope you enjoyed the webcast and we look forward to having you join us for the next webcast in the Customers Talk: Identity as a Platform webcast series: Toyota: Putting Customers First – Identity Platform as a Business Enabler Wednesday, May 16th at 10 am PST/ 1 pm EST Register Today You can also register for a live event at a city near you where Aberdeen’s Derek Brink will discuss the survey results from the recently published report “Analyzing Platform vs. Point Solution Approach in Identity”. And, you can do a quick (& free)  online assessment of your identity programs by benchmarking it against the 160 organizations surveyed  in the Aberdeen report, compliments of Oracle. Here’s the slide deck from our ING webcast: ING webcast platform View more presentations from OracleIDM

  Read the article

• Finding nuggets in ARC discussions

  - by alanc

  A bit over twenty years ago, Sun formed an Architecture Review Committee (ARC) that evaluates proposals to change interfaces between components in Sun software products. During the OpenSolaris days, we opened many of these discussions to the community. While they’re back behind closed doors, and at a different company now, we still continue to hold these reviews for the software from what’s now the Sun Systems Group division of Oracle. Recently one of these reviews was held (via e-mail discussion) to review a proposal to update our GNU findutils package to the latest upstream release. One of the upstream changes discussed was the addition of an “oldfind” program. In findutils 4.3, find was modified to use the fts() function to walk the directory tree, and oldfind was created to provide the old mechanism in case there were bugs in the new implementation that users needed to workaround. In Solaris 11 though, we still ship the find descended from SVR4 as /usr/bin/find and the GNU find is available as either /usr/bin/gfind or /usr/gnu/bin/find. This raised the discussion of if we should add oldfind, and if so what should we call it. Normally our policy is to only add the g* names for GNU commands that conflict with an existing Solaris command – for instance, we ship /usr/bin/emacs, not /usr/bin/gemacs. In this case however, that seemed like it would be more confusing to have /usr/bin/oldfind be the older version of /usr/bin/gfind not of /usr/bin/find. Thus if we shipped it, it would make more sense to call it /usr/bin/goldfind, which several ARC members noted read more naturally as “gold find” than as “g old find”. One of the concerns we often discuss in ARC is if a change is likely to be understood by users or if it will result in more calls to support. As we hit this part of the discussion on a Friday at the end of a long week, I couldn’t resist putting forth a hypothetical support call for this command: “Hello, Oracle Solaris Support, how may I help you?” “My admin is out sick, but he sent an email that he put the findutils package on our server, and I can run goldfind now. I tried it, but goldfind didn’t find gold.” “Did he get the binutils package too?” “No he just said findutils, do we need binutils?” “Well, gold comes in the binutils package, so goldfind would be able to find gold if you got that package.” “How much does Oracle charge for that package?” “It’s free for Solaris users.” “You mean Oracle ships packages of gold to customers for free?” “Yes, if you get the binutils package, it includes GNU gold.” “New gold? Is that some sort of alchemy, turning stuff into gold?” “Not new gold, gold from the GNU project.” “Oracle’s taking gold from the GNU project and shipping it to me?” “Yes, if you get binutils, that package includes gold along with the other tools from the GNU project.” “And GNU doesn’t mind Oracle taking their gold and giving it to customers?” “No, GNU is a non-profit whose goal is to share their software.” “Sharing software sure, but gold? Where does a non-profit like GNU get gold anyway?” “Oh, Google donated it to them.” “Ah! So Oracle will give me the gold that GNU got from Google!” “Yes, if you get the package from us.” “How do I get the package with the gold?” “Just run pkg install binutils and it will put it on your disk.” “We’ve got multiple disks here - which one will it put it on?” “The one with the system image - do you know which one that is? “Well the note from the admin says the system is on the first disk and the users are on the second disk.” “Okay, so it should go on the first disk then.” “And where will I find the gold?” “It will be in the /usr/bin directory.” “In the user’s bin? So thats on the second disk?” “No, it would be on the system disk, with the other development tools, like make, as, and what.” “So what’s on the first disk?” “Well if the system image is there the commands should all be there.” “All the commands? Not just what?” “Right, all the commands that come with the OS, like the shell, ps, and who.” “So who’s on the first disk too?” “Yes. Did your admin say when he’d be back?” “No, just that he had a massive headache and was going home after I tried to get him to explain this stuff to me.” “I can’t imagine why.” “Oh, is why a command too?” “No, _why was a Ruby programmer.” “Ruby? Do you give those away with the gold too?” “Yes, but it comes in the ruby package, not binutils.” “Oh, I’ll have to have my admin get that package too! Thanks!” Needless to say, we decided this might not be the best idea. Since the GNU package hasn’t had to release a serious bug fix in the new find in the past few years, the new GNU find seems pretty stable, and we always have the SVR4 find to use as a fallback in Solaris, so it didn’t seem that adding oldfind was really necessary, so we passed on including it when we update to the new findutils release. [Apologies to Abbott, Costello, their fans, and everyone who read this far. The Gold (linker) page on Wikipedia may explain some of the above, but can’t explain why goldfind is the old GNU find, but gold is the new GNU ld.]

  Read the article

• 11gR2 ???:Oracle Cluster Health Monitor(CHM)??

  - by JaneZhang(???)

     Cluster Health Monitor(????CHM)???Oracle?????,?????????????(CPU????SWAP????I/O?????)??????CHM??????????   ??????????????????????Hang?????(Eviction)????????????????,??????CHM????????????????????,????????????? CHM???????????:    11.2.0.2 ?????? Oracle Grid Infrastructure for Linux (???Linux Itanium) ?Solaris (Sparc 64 ? x86-64)    11.2.0.3 ????? Oracle Grid Infrastructure for AIX ? Windows (???Windows Itanium)?    ????,???????????CHM?????(ora.crf)???:    $ crsctl stat res -t -init    --------------------------------------------------------------------------------    NAME           TARGET  STATE        SERVER                   STATE_DETAILS       Cluster Resources ora.crf        ONLINE  ONLINE       rac1 CHM????????:    1). System Monitor Service(osysmond):?????????????,osysmond????????????????cluster logger service,???????????????????CHM?????      $ ps -ef|grep osysmond       root      7984     1  0 Jun05 ?        01:16:14 /u01/app/11.2.0/grid/bin/osysmond.bin    2). Cluster Logger Service(ologgerd):???????,ologgerd ???????(master),???????(standby)??ologgerd???????????????,??????????     ???:     $ ps -ef|grep ologgerd       root      8257     1  0 Jun05 ?        00:38:26 /u01/app/11.2.0/grid/bin/ologgerd -M -d       /u01/app/11.2.0/grid/crf/db/rac2     ???:      $ ps -ef|grep ologgerd       root      8353     1  0 Jun05 ?        00:18:47 /u01/app/11.2.0/grid/bin/ologgerd -m rac2 -r -d /u01/app/11.2.0/grid/crf/db/rac1 CHM Repository:?????????,?????,????Grid Infrastructure home ? ,??1 GB ?????,???????????0.5GB???? ?????OCLUMON??????????????????(??????3????)? ??????????????:     $ oclumon manage -get reppath       CHM Repository Path = /u01/app/11.2.0/grid/crf/db/rac2       Done     $ oclumon manage -get repsize       CHM Repository Size = 68082 <====????       Done     ????:     $ oclumon manage -repos reploc /shared/oracle/chm      ????:     $ oclumon manage -repos resize 68083 <==?3600(??) ? 259200(3?)??      rac1 --> retention check successful      New retention is 68083 and will use 1073750609 bytes of disk space      CRS-9115-Cluster Health Monitor repository size change completed on all nodes.      Done ??CHM???????????:     1. ?????Grid_home/bin/diagcollection.pl:         1). ??,??cluster logger service????:         $ oclumon manage -get master         Master = rac2         2).?root??????rac2???????:         # <Grid_home>/bin/diagcollection.pl -collect -chmos -incidenttime inc_time -incidentduration duration         inc_time?????????????,???MM/DD/YYYY24HH:MM:SS, duration??????????????????         ??:# diagcollection.pl -collect -crshome /u01/app/11.2.0/grid -chmoshome  /u01/app/11.2.0/grid -chmos -incidenttime 06/15/201215:30:00 -incidentduration 00:05       3).????????,CHM?????????chmosData_rac2_20120615_1537.tar.gz?    2. ??????CHM?????????oclumon:        $oclumon dumpnodeview [[-allnodes] | [-n node1 node2] [-last "duration"] | [-s "time_stamp" -e "time_stamp"] [-v] [-warning]] [-h]        -s??????,-e??????        $ oclumon dumpnodeview -allnodes -v -s "2012-06-15 07:40:00" -e "2012-06-15 07:57:00" > /tmp/chm1.txt       $ oclumon dumpnodeview -n node1 node2 node3 -last "12:00:00" >/tmp/chm1.txt       $ oclumon dumpnodeview -allnodes -last "00:15:00" >/tmp/chm1.txt ???/tmp/chm1.txt??????:----------------------------------------Node: rac1 Clock: '06-15-12 07.40.01' SerialNo:168880----------------------------------------SYSTEM:#cpus: 1 cpu: 17.96 cpuq: 5 physmemfree: 32240 physmemtotal: 2065856 mcache: 1064024 swapfree: 3988376 swaptotal: 4192956 ior: 57 iow: 59 ios: 10 swpin: 0 swpout: 0 pgin: 57 pgout: 59 netr: 65.767 netw: 34.871 procs: 183 rtprocs: 10 #fds: 4902 #sysfdlimit: 6815744 #disks: 4 #nics: 3  nicErrors: 0TOP CONSUMERS:topcpu: 'mrtg(32385) 64.70' topprivmem: 'ologgerd(8353) 84068' topshm: 'oracle(8760) 329452' topfd: 'ohasd.bin(6627) 720' topthread: 'crsd.bin(8235) 44'PROCESSES:name: 'mrtg' pid: 32385 #procfdlimit: 65536 cpuusage: 64.70 privmem: 1160 shm: 1584 #fd: 5 #threads: 1 priority: 20 nice: 0name: 'oracle' pid: 32381 #procfdlimit: 65536 cpuusage: 0.29 privmem: 1456 shm: 12444 #fd: 32 #threads: 1 priority: 15 nice: 0...name: 'oracle' pid: 8756 #procfdlimit: 65536 cpuusage: 0.0 privmem: 2892 shm: 24356 #fd: 47 #threads: 1 priority: 16 nice: 0----------------------------------------Node: rac2 Clock: '06-15-12 07.40.02' SerialNo:168878----------------------------------------SYSTEM:#cpus: 1 cpu: 40.72 cpuq: 8 physmemfree: 34072 physmemtotal: 2065856 mcache: 1005636 swapfree: 3991808 swaptotal: 4192956 ior: 54 iow: 104 ios: 11 swpin: 0 swpout: 0 pgin: 54 pgout: 104 netr: 77.817 netw: 33.008 procs: 178 rtprocs: 10 #fds: 4948 #sysfdlimit: 6815744 #disks: 4 #nics: 4  nicErrors: 0TOP CONSUMERS:topcpu: 'orarootagent.bi(8490) 1.59' topprivmem: 'ologgerd(8257) 83108' topshm: 'oracle(8873) 324868' topfd: 'ohasd.bin(6744) 720' topthread: 'crsd.bin(8362) 47'PROCESSES:name: 'oracle' pid: 9040 #procfdlimit: 65536 cpuusage: 0.19 privmem: 6040 shm: 121712 #fd: 33 #threads: 1 priority: 16 nice: 0...  ??CHM?????,???Oracle????:  http://docs.oracle.com/cd/E11882_01/rac.112/e16794/troubleshoot.htm#CWADD92242  Oracle® Clusterware Administration and Deployment Guide  11g Release 2 (11.2)  Part Number E16794-17  ?? My Oracle Support??:  Cluster Health Monitor (CHM) FAQ (Doc ID 1328466.1)

  Read the article

• Debugging HTML & JavaScript with Firebug

  - by MattDiPasquale

  I made a JSONP widget. However, when one of the partner sites put it in their page, (1) it doesn't render at all in IE and (2) in other browsers (Firefox & Google Chrome), the HTML of the widget renders incorrectly: the <aside> closes prematurely, before the Financial Aid Glossary. It's something specific to that page because it works fine on this example college resource center page. To fix these two issues, I tried saving the page source to a local file and messing around with the local file and with Firebug, deleting DOM elements and stuff. I even tried fixing the errors that The W3C Markup Validation Service found. But, I still couldn't get it to render correctly. How should I tell them to change their page so that the widget renders correctly? Or, how should I update the widget script I wrote? They may take their page down since it's not rendering correctly, so here's the source of the page just in case: <!DOCTYPE html> <html> <head id="ctl01_Head1" profile="New Jersey Credit Union League"><title> College Resource Center - New Jersey Credit Union League </title> <link rel='stylesheet' type='text/css' href='http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.6/themes/base/jquery.ui.all.css' /> <link rel='stylesheet' type='text/css' href='/csshandler.ashx?skin=InnerTemplate&amp;s=1&amp;v=2.3.5.8' /> <!--[if IE]> <script defer="defer" src="http://njcul.org/ClientScript/html5.js" type="text/javascript"></script> <![endif]--> <!--[if lt IE 7]> <link rel="stylesheet" href="http://njcul.org/Data/Sites/1/skins/InnerTemplate/IESpecific.css?cb=9d546eec-6752-4067-8f94-9a5b642213e4" type="text/css" id="IE6CSS" /> <![endif]--> <!--[if IE 7]> <link rel="stylesheet" href="http://njcul.org/Data/Sites/1/skins/InnerTemplate/IE7Specific.css?cb=9d546eec-6752-4067-8f94-9a5b642213e4" type="text/css" id="IE7CSS" /> <![endif]--> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="search" type="application/opensearchdescription+xml" title="New Jersey Credit Union League" href="http://njcul.org/SearchEngineInfo.ashx" /> <!--[if IE]> <meta http-equiv="Page-Enter" content="blendTrans(Duration=0)" /><meta http-equiv="Page-Exit" content="blendTrans(Duration=0)" /> <![endif]--> <meta name="viewport" content="width=670, initial-scale=0.45, minimum-scale=0.45" /> <link rel='shortcut icon' href='http://njcul.org/Data/Sites/1/skins/InnerTemplate/favicon.ico' /> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js" type="text/javascript" ></script> <script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.6/jquery-ui.min.js" type="text/javascript" ></script> <script type="text/javascript"> <!-- function MM_swapImgRestore() { //v3.0 var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; } function MM_preloadImages() { //v3.0 var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array(); var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}} } function MM_findObj(n, d) { //v4.01 var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);} if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document); if(!x && d.getElementById) x=d.getElementById(n); return x; } function MM_swapImage() { //v3.0 var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];} } //--> </script> <link href="App_Themes/pageskin/theme.css" type="text/css" rel="stylesheet" /> <link rel='canonical' href='http://njcul.org/college-resource-center.aspx' /><style type="text/css"> .ctl01_SiteMenu1_ctl00_0 { background-color:white;visibility:hidden;display:none;position:absolute;left:0px;top:0px; } .ctl01_SiteMenu1_ctl00_1 { text-decoration:none; } .ctl01_SiteMenu1_ctl00_2 { } .ctl01_PageMenu1_ctl01_0 { background-color:white;visibility:hidden;display:none;position:absolute;left:0px;top:0px; } .ctl01_PageMenu1_ctl01_1 { text-decoration:none; } .ctl01_PageMenu1_ctl01_2 { } .ctl01_PageMenu2_ctl01_0 { text-decoration:none; } </style></head> <body class="pagebody" onLoad="MM_preloadImages('ps_menu_down.png')"> <form method="post" action="/college-resource-center.aspx" onsubmit="javascript:return WebForm_OnSubmit();" id="aspnetForm"> <div> <input type="hidden" name="ctl01_ScriptManager1_HiddenField" id="ctl01_ScriptManager1_HiddenField" value="" /> <input type="hidden" name="__EVENTTARGET" id="__EVENTTARGET" value="" /> <input type="hidden" name="__EVENTARGUMENT" id="__EVENTARGUMENT" value="" /> <input type="hidden" name="__VIEWSTATEFIELDCOUNT" id="__VIEWSTATEFIELDCOUNT" value="45" /> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKMjA1OTAyNzk1MQ9kFgJmD2QWBAIBDxYCHgdwcm9maWxlBR5OZXcgSmVyc2V5IENyZWRpdCBVbmlvbiBMZWFndWVkAgMP" /> <input type="hidden" name="__VIEWSTATE1" id="__VIEWSTATE1" value="ZBYiAgEPFgIeD1NpdGVNYXBQcm92aWRlcgUJbW9qb3NpdGUxZAIDDxYEHwEFCW1vam9zaXRlMR4PU3RhcnRpbmdOb2RlVXJsBQt+" /> <input type="hidden" name="__VIEWSTATE2" id="__VIEWSTATE2" value="L2hvbWUuYXNweGQCBQ8WBB8BBQltb2pvc2l0ZTEfAgUYfi9lZHVjYXRpb24tLWV2ZW50cy5hc3B4ZAIHDxYCHwEFCW1vam9zaXRl" /> <input type="hidden" name="__VIEWSTATE3" id="__VIEWSTATE3" value="MWQCFQ8PFgIeB1Zpc2libGVoZGQCGw9kFgJmDw8WAh8DaGQWBgIBDxYCHwNoFgJmDw8WAh4EVGV4dAULU2l0ZSBTZWFyY2hkZAID" /> <input type="hidden" name="__VIEWSTATE4" id="__VIEWSTATE4" value="Dw8WAh8DaGRkAgUPDxYCHwNoZGQCIQ8PFgIfA2hkZAInD2QWAgIBDw8WAh8DaGRkAi0PZBYGAgEPDxYCHghJbWFnZVVybAUrL0Rh" /> <input type="hidden" name="__VIEWSTATE5" id="__VIEWSTATE5" value="dGEvU2l0ZXMvMS9za2lucy9Jbm5lclRlbXBsYXRlL2hlYWQxLmpwZ2RkAgMPDxYCHwUFKy9EYXRhL1NpdGVzLzEvc2tpbnMvSW5u" /> <input type="hidden" name="__VIEWSTATE6" id="__VIEWSTATE6" value="ZXJUZW1wbGF0ZS9oZWFkMi5qcGdkZAIFDw8WAh8FBSsvRGF0YS9TaXRlcy8xL3NraW5zL0lubmVyVGVtcGxhdGUvaGVhZDMuanBn" /> <input type="hidden" name="__VIEWSTATE7" id="__VIEWSTATE7" value="ZGQCLw9kFgRmDw8WAh8DaGRkAgQPDxYCHwNoZGQCMQ8PFgQeCENzc0NsYXNzBTlhcnQtbGF5b3V0LWNlbGwgYXJ0LXNpZGViYXIx" /> <input type="hidden" name="__VIEWSTATE8" id="__VIEWSTATE8" value="IGxlZnRzaWRlIGxlZnQyY29sdW1uIGNtc3pvbmUeBF8hU0ICAmQWBAIBD2QWAgICD2QWAmYPZBYCAgEPZBYCZhA8KwAJAgAPFhIe" /> <input type="hidden" name="__VIEWSTATE9" id="__VIEWSTATE9" value="FENvbGxhcHNlSW1hZ2VUb29sVGlwBRNDb2xsYXBzZSB0aGlzIG5vZGUuHg1QYXRoU2VwYXJhdG9yBHweC0V4cGFuZERlcHRoZh4S" /> <input type="hidden" name="__VIEWSTATE10" id="__VIEWSTATE10" value="RXhwYW5kSW1hZ2VUb29sVGlwBRFFeHBhbmQgdGhpcyBub2RlLh4SU2hvd0V4cGFuZENvbGxhcHNlZx4NTmV2ZXJFeHBhbmRlZGQe" /> <input type="hidden" name="__VIEWSTATE11" id="__VIEWSTATE11" value="C18hRGF0YUJvdW5kZx4XUG9wdWxhdGVOb2Rlc0Zyb21DbGllbnRnHgxEYXRhU291cmNlSUQFEGxldmVsM2RhdGFzb3VyY2VkCBQr" /> <input type="hidden" name="__VIEWSTATE12" id="__VIEWSTATE12" value="AAsFPzA6MCwwOjEsMDoyLDA6MywwOjQsMDo1LDA6NiwwOjcsMTo3LDA6NywwOjgsMTo4LDA6OCwxOjgsMDo4LDA6ORQrAAIWDB8E" /> <input type="hidden" name="__VIEWSTATE13" id="__VIEWSTATE13" value="BRJDYWxlbmRhciBvZiBFdmVudHMeBVZhbHVlBSQyMmU3NmVlZC1iZWM0LTRjNWItYWJhNC04MTVjNTJmNTJiNDQeC05hdmlnYXRl" /> <input type="hidden" name="__VIEWSTATE14" id="__VIEWSTATE14" value="VXJsBRl+L2NhbGVuZGFyLW9mLWV2ZW50cy5hc3B4HghEYXRhUGF0aAUCNjceCURhdGFCb3VuZGceEFBvcHVsYXRlT25EZW1hbmRo" /> <input type="hidden" name="__VIEWSTATE15" id="__VIEWSTATE15" value="ZBQrAAIWDB8EBRBDaGFwdGVyIE1lZXRpbmdzHxEFJGNiZGUyMTFhLTc0YzItNDI2Zi05NjQ4LTQ5NTY2ZjY4NjViNx8SBRd+L2No" /> <input type="hidden" name="__VIEWSTATE16" id="__VIEWSTATE16" value="YXB0ZXItbWVldGluZ3MuYXNweB8TBQI2OB8UZx8VaGQUKwACFgwfBAUOU3BlY2lhbCBFdmVudHMfEQUkODgxZjE0Y2EtMWI0NC00" /> <input type="hidden" name="__VIEWSTATE17" id="__VIEWSTATE17" value="YjYxLWE2YmQtMjk2Mzc0NzMyZGY1HxIFFX4vc3BlY2lhbC1ldmVudHMuYXNweB8TBQI2OR8UZx8VZ2QUKwACFgwfBAUURWR1Y2F0" /> <input type="hidden" name="__VIEWSTATE18" id="__VIEWSTATE18" value="aW9uYWwgU2Vzc2lvbnMfEQUkM2QxYTBmZWUtMTk1Ny00MGYwLThlMzItNzEzMjM4ZDM5Yjg5HxIFG34vZWR1Y2F0aW9uYWwtc2Vz" /> <input type="hidden" name="__VIEWSTATE19" id="__VIEWSTATE19" value="c2lvbnMuYXNweB8TBQI3MB8UZx8VZ2QUKwACFgwfBAUsU3BlY2lhbCBDVSBEaXJlY3RvciAmYW1wOyBWb2x1bnRlZXIgUHJvZ3Jh" /> <input type="hidden" name="__VIEWSTATE20" id="__VIEWSTATE20" value="bXMfEQUkMGRjNWUwY2EtMWQyNy00N2JlLTgwMjgtNmYzY2Q2NmNjNTkzHxIFLX4vc3BlY2lhbC1jdS1kaXJlY3Rvci12b2x1bnRl" /> <input type="hidden" name="__VIEWSTATE21" id="__VIEWSTATE21" value="ZXItcHJvZ3JhbXMuYXNweB8TBQMxNjgfFGcfFWhkFCsAAhYMHwQFG0NVTkEgTGVhcm5pbmcgT3Bwb3J0dW5pdGllcx8RBSQyZTRl" /> <input type="hidden" name="__VIEWSTATE22" id="__VIEWSTATE22" value="YWYyMS0wNjEwLTQ5OWYtYTVmMy1lN2VlNjM2ZWZiMmUfEgUifi9jdW5hLWxlYXJuaW5nLW9wcG9ydHVuaXRpZXMuYXNweB8TBQI2" /> <input type="hidden" name="__VIEWSTATE23" id="__VIEWSTATE23" value="Nh8UZx8VaGQUKwACFgwfBAUrWW91dGggSW52b2x2ZW1lbnQgQm9hcmQgU2Nob2xhcnNoaXAgUHJvZ3JhbR8RBSRjNjUzMjQwNC1k" /> <input type="hidden" name="__VIEWSTATE24" id="__VIEWSTATE24" value="OTY1LTQ4ZmYtYTZhNC02YmFkYjU4ZDE0YTAfEgUKfi95aWIuYXNweB8TBQI5Nh8UZx8VaGQUKwACFgwfBAUbRXhlY3V0aXZlIExl" /> <input type="hidden" name="__VIEWSTATE25" id="__VIEWSTATE25" value="YWRlcnNoaXAgU2VyaWVzHxEFJDE0MTg2ZTUzLWI4MWMtNDIzOS1iMDM5LWY5N2U2ZTI2ZDU4OR8SBQp+L2Vscy5hc3B4HxMFAzEy" /> <input type="hidden" name="__VIEWSTATE26" id="__VIEWSTATE26" value="OR8UZx8VaGQUKwACFgwfBAUUQ2VydGlmaWNhdGUgUHJvZ3JhbXMfEQUkNjMxYWFkMzctY2NhZS00OTFhLWE3YjAtODI3NzM5YWM1" /> <input type="hidden" name="__VIEWSTATE27" id="__VIEWSTATE27" value="NjZhHxIFGn4vY2VydGlmaWNhdGVwcm9ncmFtcy5hc3B4HxMFAzE1Mx8UZx8VZ2QUKwACFhAfBAUXQ29sbGVnZSBSZXNvdXJjZSBD" /> <input type="hidden" name="__VIEWSTATE28" id="__VIEWSTATE28" value="ZW50ZXIfEQUkOTI3NDJkM2QtZTYzYS00OTg2LTgwMTYtYjNkNjlhNWU5NzA3HxIFHn4vY29sbGVnZS1yZXNvdXJjZS1jZW50ZXIu" /> <input type="hidden" name="__VIEWSTATE29" id="__VIEWSTATE29" value="YXNweB8TBQMxNjYfFGceCFNlbGVjdGVkZx8VaB4IRXhwYW5kZWRnZAUPY3RsMDEkY3RsMDZ8bm5uZAIDDw8WAh8DaGRkAjMPDxYE" /> <input type="hidden" name="__VIEWSTATE30" id="__VIEWSTATE30" value="HwYFNWFydC1sYXlvdXQtY2VsbCBhcnQtY29udGVudCBjZW50ZXItbGVmdG1hcmdpbiBjbXN6b25lHwcCAmQWBgIBD2QWAmYPDxYE" /> <input type="hidden" name="__VIEWSTATE31" id="__VIEWSTATE31" value="HwYFC2JyZWFkY3J1bWJzHwcCAmQWAgIBDzwrAAUBAA8WBh4VUGFyZW50TGV2ZWxzRGlzcGxheWVkAgIfCQUDID4gHwNnZBYGZg9k" /> <input type="hidden" name="__VIEWSTATE32" id="__VIEWSTATE32" value="FgICAQ8PFggfEgUKL2hvbWUuYXNweB8EBQRIb21lHwYFD3Vuc2VsZWN0ZWRjcnVtYh8HAgJkZAICD2QWAgIBDw8WCB8SBRcvZWR1" /> <input type="hidden" name="__VIEWSTATE33" id="__VIEWSTATE33" value="Y2F0aW9uLS1ldmVudHMuYXNweB8EBRZFZHVjYXRpb24gJmFtcDsgRXZlbnRzHwYFD3Vuc2VsZWN0ZWRjcnVtYh8HAgJkZAIED2QW" /> <input type="hidden" name="__VIEWSTATE34" id="__VIEWSTATE34" value="AgIBDw8WCB8SBR0vY29sbGVnZS1yZXNvdXJjZS1jZW50ZXIuYXNweB8EBRdDb2xsZWdlIFJlc291cmNlIENlbnRlch8GBQ1zZWxl" /> <input type="hidden" name="__VIEWSTATE35" id="__VIEWSTATE35" value="Y3RlZGNydW1iHwcCAmRkAgMPDxYCHwNoZGQCBQ9kFgJmD2QWAmYPDxYEHwYFCW1vZHVsZTI0MR8HAgJkFgICAQ9kFgICAw9kFgIC" /> <input type="hidden" name="__VIEWSTATE36" id="__VIEWSTATE36" value="Aw9kFgICAQ8PFgQeC0NvbnRlbnRHdWlkKClYU3lzdGVtLkd1aWQsIG1zY29ybGliLCBWZXJzaW9uPTIuMC4wLjAsIEN1bHR1cmU9" /> <input type="hidden" name="__VIEWSTATE37" id="__VIEWSTATE37" value="bmV1dHJhbCwgUHVibGljS2V5VG9rZW49Yjc3YTVjNTYxOTM0ZTA4OSRmOWU3YTZiYy1lYjYzLTQ0YzQtOGQyYS1hYTEyMmZmMTJh" /> <input type="hidden" name="__VIEWSTATE38" id="__VIEWSTATE38" value="YTMfA2hkFgICAQ9kFgJmD2QWBAIFD2QWAmYPFgIeCkNhbGxiYWNrSUQFKWN0bDAxJG1haW5Db250ZW50JGN0bDAwJFJhdGluZyRV" /> <input type="hidden" name="__VIEWSTATE39" id="__VIEWSTATE39" value="c2VyUmF0aW5nZAIHDxYCHxEFJGY5ZTdhNmJjLWViNjMtNDRjNC04ZDJhLWFhMTIyZmYxMmFhM2QCNQ8PFgYfBgURcmlnaHRzaWRl" /> <input type="hidden" name="__VIEWSTATE40" id="__VIEWSTATE40" value="IGNtc3pvbmUfBwICHwNoZGQCNw8PFgQfBgUTYWx0Y29udGVudDIgY21zem9uZR8HAgJkZAI5Dw8WBB8GBRNhbHRjb250ZW50MiBj" /> <input type="hidden" name="__VIEWSTATE41" id="__VIEWSTATE41" value="bXN6b25lHwcCAmRkAj0PDxYCHwNoZBYKAgEPDxYCHwNoZGQCAw8PFgIfA2hkZAIFDw8WAh8DaGRkAgcPDxYCHwNoZGQCCQ8PFgIf" /> <input type="hidden" name="__VIEWSTATE42" id="__VIEWSTATE42" value="A2hkZAJBDw8WAh8DaGRkGAMFHl9fQ29udHJvbHNSZXF1aXJlUG9zdEJhY2tLZXlfXxYBBRVjdGwwMSRQYWdlTWVudTIkY3RsMDEF" /> <input type="hidden" name="__VIEWSTATE43" id="__VIEWSTATE43" value="FWN0bDAxJFBhZ2VNZW51MSRjdGwwMQ8PZAUkY2E4YTRkMmQtYWZkMy00ZGQ2LWIxYzEtYWY0MjhiOTc4ZThjZAUVY3RsMDEkU2l0" /> <input type="hidden" name="__VIEWSTATE44" id="__VIEWSTATE44" value="ZU1lbnUxJGN0bDAwDw9kBSQ2ZWU5NzFjZC05OTU2LTRkYzMtODE2Mi1hNDg4NDEzZTdmNThk" /> </div> <script type="text/javascript"> //<![CDATA[ var theForm = document.forms['aspnetForm']; if (!theForm) { theForm = document.aspnetForm; } function __doPostBack(eventTarget, eventArgument) { if (!theForm.onsubmit || (theForm.onsubmit() != false)) { theForm.__EVENTTARGET.value = eventTarget; theForm.__EVENTARGUMENT.value = eventArgument; theForm.submit(); } } //]]> </script> <script src="/WebResource.axd?d=x2eneDuLFQ9w4yRoi8Y5tg2&amp;t=634230536572508135" type="text/javascript"></script> <script type="text/javascript">var GB_ROOT_DIR = '/ClientScript/greybox/'; var GBCloseText = 'Close'; </script> <script src="/ClientScript/mojocombined/mojocombinedfull.js" type="text/javascript" ></script> <script src="/ClientScript/jqmojo/cycle.js" type="text/javascript" ></script> <script src="/ScriptResource.axd?d=wCo0V0P8aplVAKjdc-kM9AvNmwrQFDA24wrkA7OkI6gOYp_VxxHWIc8VlP8L0l200&amp;t=fffffffff615adfd" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ Sys.Services._AuthenticationService.DefaultWebServicePath = 'Authentication_JSON_AppService.axd'; Sys.Services._RoleService.DefaultWebServicePath = 'Role_JSON_AppService.axd'; //]]> </script> <script src="/ScriptResource.axd?d=wCo0V0P8aplVAKjdc-kM9AvNmwrQFDA24wrkA7OkI6gjdZ5z-Kq5dVZ7FGYv9jU40&amp;t=fffffffff615adfd" type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ function WebForm_OnSubmit() { document.getElementById('ctl01_ctl06').value = GetViewState__AspNetTreeView('ctl01_PageMenu2_ctl01_UL'); return true; } //]]> </script> <script type="text/javascript"> //<![CDATA[ Sys.WebForms.PageRequestManager._initialize('ctl01$ScriptManager1', document.getElementById('aspnetForm')); Sys.WebForms.PageRequestManager.getInstance()._updateControls(['tctl01$PageMenu1$upMenu','tctl01$PageMenu2$upMenu'], [], [], 90); //]]> </script> <div id="wrapwebsite"> <img src="top.png" border="0" width="900" height="36"> <div class="topnav"> <ul> <li class="firstnav"><a class="sitelink homelink" href="/">Home</a></li> <li class="topnavitem"><a class="sitelink" href="/SiteMap.aspx">Site Map</a></li> <li class='topnavitem'><a href='/SearchResults.aspx' class='sitelink'>Search</a></li> <li class="topnavitem"><a class="sitelink" href="/Secure/Login.aspx">Sign In</a></li> </ul> <a href='#startcontent' class='skiplink'>Skip over navigation</a> <div id="ctl01_pnlStandardLogin" class="floatpanel"> </div> <div class="addthis"> <div id="ctl01_InsecurePanel1" class="addthisbutton"> </div> </div> </div> <div id="topmenu"> <div class="AspNet-Menu-Horizontal" id="ctl01_SiteMenu1_ctl00"> <ul class="AspNet-Menu"> <li class="AspNet-Menu-Leaf AspNet-Menu-SelectedLeaf"> <a href="/home.aspx" class="AspNet-Menu AspNet-Menu-SelectedLeaf"> <img src="Data/SiteImages/FeatureIcons/house.png" alt="Home" /> Home</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/professional-products-and-services.aspx" class="AspNet-Menu"> Professional Products and Services</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/news-publications-announcements.aspx" class="AspNet-Menu"> News, Publications &amp; Announcements</a> </li> </ul> </div> </div> <div id="wrapheader"> <a href="/default.aspx"><img src="logo.png" border="0" width="420" height="104" align="left"></a> <a href="Secure/Login.aspx" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('memberLogin','','ps_menu_down2.png',1)"><img src="ps_menu_up2.png" alt="Member Login" name="memberLogin" width="171" height="20" border="0" style="padding-left:270px; padding-top:0px;"></a><br /> <!--<a href="products-and-services.aspx" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('productsServices','','ps_menu_down.png',1)"><img src="ps_menu_up.png" alt="Access Products & Services" name="productsServices" width="171" height="20" border="0" style="padding-left:95px;"></a>--> <a href="professional-products-and-services.aspx"><img src="productServicesNav.jpg" border="0" width="203" height="37" style="padding-left:200px; padding-top:54px;"></a> <!-- <h1 class='art-Logo-name art-logo-name siteheading'><a class='siteheading' href='http://njcul.org/Default.aspx'>New Jersey Credit Union League</a></h1> <div id="ctl01_spanel1" class="rotatecontainer"> <img id="ctl01_imgs1" class="rotateitem" src="/Data/Sites/1/skins/InnerTemplate/head1.jpg" alt=" " style="border-width:0px;" /> <img id="ctl01_imgs2" class="rotateitem" src="/Data/Sites/1/skins/InnerTemplate/head2.jpg" alt=" " style="border-width:0px;" /> <img id="ctl01_imgs3" class="rotateitem" src="/Data/Sites/1/skins/InnerTemplate/head3.jpg" alt=" " style="border-width:0px;" /> </div> --> </div> <div id="outercontainer"> <div id="ctl01_PageMenu1_upMenu"> <div class="AspNet-Menu-Horizontal" id="ctl01_PageMenu1_ctl01"> <ul class="AspNet-Menu"> <li class="AspNet-Menu-Leaf"> <a href="/consumer-advocacy.aspx" class="AspNet-Menu"> Consumer Advocacy</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/compliance.aspx" class="AspNet-Menu"> Compliance</a> </li> <li class="AspNet-Menu-Leaf AspNet-Menu-SelectedLeaf"> <a href="/education--events.aspx" class="AspNet-Menu AspNet-Menu-SelectedLeaf"> Education &amp; Events</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/government-affairs.aspx" class="AspNet-Menu"> Government Affairs</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/news.aspx" class="AspNet-Menu"> News</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/about-us.aspx" class="AspNet-Menu"> About Us</a> </li> <li class="AspNet-Menu-Leaf"> <a href="/nj-credit-union-foundation.aspx" class="AspNet-Menu"> Foundation </a> </li> </ul> </div> </div> <div id="innercontainer"> <div id="wrapcenter"> <div id="ctl01_divLeft" class="art-layout-cell art-sidebar1 leftside left2column cmszone"> <div id="gutter"> <div id="ctl01_PageMenu2_upMenu"> <div class="AspNet-TreeView" id="ctl01_PageMenu2_ctl01"> <ul id="ctl01_PageMenu2_ctl01_UL"> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/calendar-of-events.aspx"> Calendar of Events</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/chapter-meetings.aspx"> Chapter Meetings</a> </li> <li class="AspNet-TreeView-Root"> <a class="AspNet-TreeView-Expand" onclick="__doPostBack('ctl01$PageMenu2$ctl01','p881f14ca-1b44-4b61-a6bd-296374732df5'); return false;" href="/special-events.aspx" title="Expand this node.">&nbsp;</a> <a href="/special-events.aspx"> Special Events</a> </li> <li class="AspNet-TreeView-Root"> <a class="AspNet-TreeView-Expand" onclick="__doPostBack('ctl01$PageMenu2$ctl01','p3d1a0fee-1957-40f0-8e32-713238d39b89'); return false;" href="/educational-sessions.aspx" title="Expand this node.">&nbsp;</a> <a href="/educational-sessions.aspx"> Educational Sessions</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/special-cu-director-volunteer-programs.aspx"> Special CU Director &amp; Volunteer Programs</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/cuna-learning-opportunities.aspx"> CUNA Learning Opportunities</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/yib.aspx"> Youth Involvement Board Scholarship Program</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf"> <a href="/els.aspx"> Executive Leadership Series</a> </li> <li class="AspNet-TreeView-Root"> <a class="AspNet-TreeView-Expand" onclick="__doPostBack('ctl01$PageMenu2$ctl01','p631aad37-ccae-491a-a7b0-827739ac566a'); return false;" href="/certificateprograms.aspx" title="Expand this node.">&nbsp;</a> <a href="/certificateprograms.aspx"> Certificate Programs</a> </li> <li class="AspNet-TreeView-Root AspNet-TreeView-Leaf AspNet-TreeView-Selected"> <a href="/college-resource-center.aspx"> College Resource Center</a> </li> </ul> </div> </div> </div> <!----> <a id="startcontent"></a> </div> <div id="ctl01_divCenter" class="art-layout-cell art-content center-leftmargin cmszone"> <div id="ctl01_Breadcrumbs_pnlWrapper" class="breadcrumbs"> <span id="ctl01_Breadcrumbs_breadCrumbsControl"><span> <a id="ctl01_Breadcrumbs_breadCrumbsControl_ctl00_lnkNode" class="unselectedcrumb" href="/home.aspx">Home</a> </span><span> > </span><span> <a id="ctl01_Breadcrumbs_breadCrumbsControl_ctl02_lnkNode" class="unselectedcrumb" href="/education--events.aspx">Education &amp; Events</a> </span><span> > </span><span> <a id="ctl01_Breadcrumbs_breadCrumbsControl_ctl04_lnkCurrent" class="selectedcrumb" href="/college-resource-center.aspx">College Resource Center</a> </span></span> </div> <div id="ctl01_mainContent_ctl00_pnlContainer" class="module241"> <div id="ctl01_mainContent_ctl00_pnlWrapper" class="art-Post-inner panelwrapper htmlmodule"> <a id='module241' class='moduleanchor'></a><h2 class="art-PostHeader moduletitle">CUStudentLoans.org College Resource Center <a class="ModuleEditLink"></a></h2> <div class=" modulecontent"> <div id="ctl01_mainContent_ctl00_divContent" class="slidecontainer"> <style> /* Edit the font family and width of overall content */ #cusl-page { font-family: 'Lucida Grande', Lucida, Arial, sans-serif; font-size: 62.5%; width: 630px; } /* Link colors */ #cusl-page a { color: #004a80; } /* Header image */ #cusl-page #header { display:none !important; } /* Heading text color */ #cusl-content h2 { color: #0e6c55; font-size:18px; } #cusl-page aside h3 a { font-size:16px } #cusl-page aside h2 { font-size:18px; } #cusl-content article h3 a { font-size:20px; line-height:26px !important; } </style> <script src="https://www.custudentloans.org/javascripts/cusl-page.js"></script> <script> new CUSL.Page({ count: 5, // defaults to 7 cu_url: 'http://www.custudentloans.org' }).render(); </script> <div id="footer"> <p><a target="_blank" href="http://www.custudentloans.org/student/college-financing-101">Learn more about Private Student Loans at <em>Ken's Korner</em></a></p> </div> </div> </div> <div class="modulefooter"></div> <div class="cleared"></div> </div> </div> </div> </div> <div id="ctl01_divAlt1" class="altcontent2 cmszone"> </div> <div id="ctl01_divAltContent2" class="altcontent2 cmszone"> </div> <div id="wrapfooter"> <img src="footerImage.png" border="0" width="900" height="134"> &copy; 2008 - 2011 New Jersey Credit Union League | <a href="/privacy-policy.aspx">Privacy Policy</a> | Design and Website by: <a href="http://www.greylockmarketing.com/" target="_blank">Greylock Marketing</a> & <a href="http://www.socialboostmedia.com/" target="_blank">Social Boost Media</a> <br /> <br /> </div> </div> </div> </div> <script type="text/javascript"> function HideMenuToolbar(){ $("#toolbar").fadeOut(); $("#toolbarbut").fadeIn("slow");} function ShowMenuToolbar(){ $("#toolbar").fadeIn(); $("#toolbarbut").fadeOut("slow");} $(document).ready(function(){ $("span.downarr a").click(function() {HideMenuToolbar(); Set_Cookie('openstate', 'closed')}); $("span.showbar a").click(function() {ShowMenuToolbar(); Set_Cookie('openstate', 'open') }); $("span.downarr a, span.showbar a").click(function() { return false; }); var openState = Get_Cookie('openstate'); if(openState != null){ if(openState == 'closed'){HideMenuToolbar();} if(openState == 'open'){ShowMenuToolbar();}} }); </script> <div> <input type="hidden" name="ctl01$ctl06" id="ctl01_ctl06" /> </div> <div> <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWBQKv1e3VCALs75XzDgL+qaz3AwLv26TNCQKS/MC2Dg==" /> </div> <script type="text/javascript">Sys.Application.add_load(function() { var form = Sys.WebForms.PageRequestManager.getInstance()._form; form._initialAction = form.action = window.location.href; }); </script> <script type="text/javascript"> //<![CDATA[ (function() {var fn = function() {$get("ctl01_ScriptManager1_HiddenField").value = '';Sys.Application.remove_init(fn);};Sys.Application.add_init(fn);})(); WebForm_InitCallback();//]]> </script> <script type="text/javascript" > $('div.mojo-accordion').accordion({fx:{opacity:'toggle',duration:'fast'}}); $('div.mojo-accordion-nh').accordion({fx:{opacity:'toggle',duration:'fast'},autoHeight:false}); $('div.mojo-tabs').tabs({fx:{opacity:'toggle',duration:'fast'}}); $('input.jqbutton').button(); </script> <script type="text/javascript">$('#ctl01_spanel1').cycle({fx:'fade',speed:1000,timeout:3000,next:'#ctl01_spanel1'});</script> <script type="text/javascript"> var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); </script> <script type="text/javascript"> try{ var mojoPageTracker = _gat._getTracker("UA-19333588-1"); mojoPageTracker._setCustomVar(1, "member-type", "anonymous", 1);mojoPageTracker._trackPageview(); } catch(err) {} </script> <script type="text/javascript"> //<![CDATA[ Sys.Application.initialize(); //]]> </script> </form> </body> </html>

  Read the article

• Entry lvl. COBOL Control Breaks

  - by Kyle Benzle

  I'm working in COBOL with a double control break to print a hospital record. The input is one record per line, with, hospital info first, then patient info. There are multiple records per hospital, and multiple services per patient. The idea is, using a double control break, to print one hospital name, then all the patients from that hospital. Then print the patient name just once for all services, like the below. I'm having trouble with my output, and am hoping someone can help me get it in order. I am using AccuCobol to compile experts-exchange does not allow .cob and .dat so the extentions were changed to .txt The files are: the .cob lab5b.cob the input / output: lab5bin.dat, lab5bout.dat The assignment: http://www.cse.ohio-state.edu/~sgomori/314/lab5.html Hospital Number: 001 Hospital Name: Mount Carmel 00001 Griese, Brian Ear Infection 08/24/1999 300.00 Diaper Rash 09/05/1999 25.00 Frontal Labotomy 09/25/1999 25,000.00 Rear Labotomy 09/26/1999 25,000.00 Central Labotomy 09/28/1999 24,999.99 The total amount owed for this patient is: $.......... (End of Hospital) The total amount owed for this hospital is: $......... enter code here IDENTIFICATION DIVISION. PROGRAM-ID. LAB5B. ENVIRONMENT DIVISION. INPUT-OUTPUT SECTION. FILE-CONTROL. SELECT FILE-IN ASSIGN TO 'lab5bin.dat' ORGANIZATION IS LINE SEQUENTIAL. SELECT FILE-OUT ASSIGN TO 'lab5bout.dat' ORGANIZATION IS LINE SEQUENTIAL. DATA DIVISION. FILE SECTION. FD FILE-IN. 01 HOSPITAL-RECORD-IN. 05 HOSPITAL-NUMBER-IN PIC 999. 05 HOSPITAL-NAME-IN PIC X(20). 05 PATIENT-NUMBER-IN PIC 99999. 05 PATIENT-NAME-IN PIC X(20). 05 SERVICE-IN PIC X(30). 05 DATE-IN PIC 9(8). 05 OWED-IN PIC 9(7)V99. FD FILE-OUT. 01 REPORT-REC-OUT PIC X(100). WORKING-STORAGE SECTION. 01 WS-WORK-AREAS. 05 WS-HOLD-HOSPITAL-NUM PIC 999 VALUE ZEROS. 05 WS-HOLD-PATIENT-NUM PIC 99999 VALUE ZEROS. 05 ARE-THERE-MORE-RECORDS PIC XXX VALUE 'YES'. 88 MORE-RECORDS VALUE 'YES'. 88 NO-MORE-RECORDS VALUE 'NO '. 05 FIRST-RECORD PIC XXX VALUE 'YES'. 05 WS-PATIENT-TOTAL PIC 9(9)V99 VALUE ZEROS. 05 WS-HOSPITAL-TOTAL PIC 9(9)V99 VALUE ZEROS. 05 WS-PAGE-CTR PIC 99 VALUE ZEROS. 01 WS-DATE. 05 WS-YR PIC 9999. 05 WS-MO PIC 99. 05 WS-DAY PIC 99. 01 HL-HEADING1. 05 PIC X(49) VALUE SPACES. 05 PIC X(14) VALUE 'OHIO INSURANCE'. 05 PIC X(7) VALUE SPACES. 05 HL-PAGE PIC Z9. 05 PIC X(14) VALUE SPACES. 05 HL-DATE. 10 HL-MO PIC 99. 10 PIC X VALUE '/'. 10 HL-DAY PIC 99. 10 PIC X VALUE '/'. 10 HL-YR PIC X VALUE '/'. 01 HL-HEADING2. 05 PIC XXXXXXXXXX VALUE 'HOSPITAL: '. 05 HL-HOSPITAL PIC 999. 01 HL-HEADING3. 05 PIC X(7) VALUE "Patient". 05 PIC X(3) VALUE SPACES. 05 PIC X(7) VALUE "Patient". 05 PIC X(39) VALUE SPACES. 05 PIC X(7) VALUE "Date of". 05 PIC X(3) VALUE SPACES. 05 PIC X(6) VALUE "Amount". 01 HL-HEADING4. 05 PIC X(6) VALUE "Number". 05 PIC X(4) VALUE SPACES. 05 PIC X(4) VALUE "Name". 05 PIC X(18) VALUE SPACES. 05 PIC X(10) VALUE "Service". 05 PIC X(14) VALUE SPACES. 05 PIC X(8) VALUE "Service". 05 PIC X(2) VALUE SPACES. 05 PIC X(5) VALUE "Owed". 01 DL-PATIENT-LINE. 05 PIC X(28) VALUE SPACES. 05 DL-PATIENT-NUMBER PIC XXXXX. 05 PIC X(21) VALUE SPACES. 05 DL-PATIENT-TOTAL PIC $$$,$$$,$$9.99. 01 DL-HOSPITAL-LINE. 05 PIC X(47) VALUE SPACES. 05 PIC X(16) VALUE 'HOSPITAL TOTAL: '. 05 DL-HOSPITAL-TOTAL PIC $$$,$$$,$$9.99. PROCEDURE DIVISION. 100-MAIN-MODULE. PERFORM 600-INITIALIZATION-RTN PERFORM UNTIL NO-MORE-RECORDS READ FILE-IN AT END MOVE 'NO ' TO ARE-THERE-MORE-RECORDS NOT AT END PERFORM 200-DETAIL-RTN END-READ END-PERFORM PERFORM 400-HOSPITAL-BREAK PERFORM 700-END-OF-JOB-RTN STOP RUN. 200-DETAIL-RTN. EVALUATE TRUE WHEN FIRST-RECORD = 'YES' MOVE PATIENT-NUMBER-IN TO WS-HOLD-PATIENT-NUM MOVE HOSPITAL-NUMBER-IN TO WS-HOLD-HOSPITAL-NUM PERFORM 500-HEADING-RTN MOVE 'NO ' TO FIRST-RECORD WHEN HOSPITAL-NUMBER-IN NOT = WS-HOLD-HOSPITAL-NUM PERFORM 400-HOSPITAL-BREAK WHEN PATIENT-NUMBER-IN NOT = WS-HOLD-PATIENT-NUM PERFORM 300-PATIENT-BREAK END-EVALUATE ADD OWED-IN TO WS-PATIENT-TOTAL. 300-PATIENT-BREAK. MOVE WS-PATIENT-TOTAL TO DL-PATIENT-TOTAL MOVE WS-HOLD-PATIENT-NUM TO DL-PATIENT-NUMBER WRITE REPORT-REC-OUT FROM DL-PATIENT-LINE AFTER ADVANCING 2 LINES ADD WS-PATIENT-TOTAL TO WS-HOSPITAL-TOTAL IF MORE-RECORDS MOVE ZEROS TO WS-PATIENT-TOTAL MOVE PATIENT-NUMBER-IN TO WS-HOLD-PATIENT-NUM END-IF. 400-HOSPITAL-BREAK. PERFORM 300-PATIENT-BREAK MOVE WS-HOSPITAL-TOTAL TO DL-HOSPITAL-TOTAL WRITE REPORT-REC-OUT FROM DL-HOSPITAL-LINE AFTER ADVANCING 2 LINES IF MORE-RECORDS MOVE ZEROS TO WS-HOSPITAL-TOTAL MOVE HOSPITAL-NUMBER-IN TO WS-HOLD-HOSPITAL-NUM PERFORM 500-HEADING-RTN END-IF. 500-HEADING-RTN. ADD 1 TO WS-PAGE-CTR MOVE WS-PAGE-CTR TO HL-PAGE MOVE WS-HOLD-HOSPITAL-NUM TO HL-HOSPITAL WRITE REPORT-REC-OUT FROM HL-HEADING1 AFTER ADVANCING PAGE WRITE REPORT-REC-OUT FROM HL-HEADING2 AFTER ADVANCING 2 LINES. WRITE REPORT-REC-OUT FROM HL-HEADING3 AFTER ADVANCING 2 LINES. 600-INITIALIZATION-RTN. OPEN INPUT FILE-IN OUTPUT FILE-OUT *159 ACCEPT WS-DATE FROM DATE YYYYMMDD MOVE WS-YR TO HL-YR MOVE WS-MO TO HL-MO MOVE WS-DAY TO HL-DAY. 700-END-OF-JOB-RTN. CLOSE FILE-IN FILE-OUT.

  Read the article

• How to find an entry-level job after you already have a graduate degree?

  - by Uri

  Note: I asked this question in early 2009. A couple of months later, I found a great job. I've previously updated this question with some tips for whoever ends up in a similar situation, and now cleaned it up a little for the benefit of the fresh batch of graduates. Original post: In my early 20s I abandoned a great C++ development career path in a major company to go to graduate school and get a research masters (3 years). I did another year in industrial research, and then moved to the US to attend graduate school again, getting another masters and a Ph.D in software engineering from a top school (another 6 years down the drain). I was coding the whole way throughout my degrees (core Java and Eclipse plug-ins) and working on research related to software engineering (usability of APIs). I ended up graduating the year of the recession, with a son on the way and the prospects of no healthcare. Academic jobs and industrial research jobs are quite scarce. Initially, I was naive, thinking that with my background, I could easily find a coding job. Big mistake. It turns out that I'm in a complicated position. Entry level positions are usually offered to college undergraduates. I attended my school's career fairs, but you could immediately see signs of Ph.D. aversion and overqualification issues. Some of the recruiters I spoke with explicitly told me that they wanted 20 year olds with clean slates, and some were looking for interns since they are in various forms of hiring freezes. I managed to get a couple of interviews from these career fairs and through recruiters. However, since I've been out of school for a long time and programming primarily in Java, I am also no longer proficient in C/C++ and the usual range of college-level interview questions that everyone uses. I had no problems with this when I was 19 and interviewing for my first job since a lot of what you do in C is manipulate pointers and I was coding C++ for fun and for school. Later I was routinely doing pointer manipulation on the job, and during my first masters taught college courses with data structures and C++. But even though I remember many properties of C++ well, it's been close to ten years since I regularly used C++ and pointers. As a Java developer I rarely had to work at this level, but experience in OOD and in writing good maintainable code is meaningless for C++ interviews. Reading books as a refresh and looking at sample code did not do the trick. I also looked at mid-to-senior level Java positions, but most of them focused on J2EE APIs rather than on core Java and required a certain number of years in industrial positions. Coding research tools and prior C++ experience doesn't count. So that sends me back to entry-level jobs that are posted through job-boards, and these are not common (mostly they are Monster junk), and small companies are even less likely to answer a Ph.D. compared to the giants who participate in top-10 career fairs. Even worse, in many companies initial screening is done by HR folks who really don't want to deal with anything anomalous like a Ph.D. Any tips on how I should approach this intractable position? For example, what should I write in cover letters? Note that while immigration is not an issue for me, I cannot go freelance as I need the benefits (and in particular group health insurance). During my studies I had no time to contribute to open-source projects or maintain a popular blog, so even if I invested in that now there would be no immediate benefit. Updates: In the two months after posting this I received several offers to work as a core Java developer in the financial industry and accepted one from a firm where I am working to this day. For those who find themselves in similar situations, here are my tips: Give up on trying to find an entry level positions. You can't undo time. Accept the fact that there is Ph.D. discrimination in the job market (some might say rightfully so). It is legal to discriminate based on education. No point fighting it. The most important tip is to focus on the language you are comfortable with. The sad truth about programming in a particular language is that it is not like riding a bike. If you haven't used a language in the last few years, and can't actually apply it routinely (not just as a refresher) before you start your search, it is going to be very difficult to do well in an interview. Now that I'm interviewing others, I routinely see it in folks with a mixed C++/Java background. We maintain "a shadow" of the old language but end up with a weird mix that makes it hard to interview on either. Entry-level folks are at an advantage here since they usually have one language. Memory can help you do great in a screening interview, but without recent day-to-day experience, code tests will be difficult. Despite the supposed relation, core Java programming and J2EE programming are two different things with different skillsets. If you come from academia, you likely have very little J2EE experience and may find it hard to get accepted for a J2EE job. J2EE jobs seem to have a larger list of acronyms in their requirements. In addition, from interviewing J2EE developers it seems that for many there is a focus on mastering specific APIs and architectures, whereas core Java development tends to be secondary. In the same way that I can no longer manipulate pointers well, a J2EE developer may have difficulties doing low level Java manipulation. This puts you at a relative advantage in competing for core Java jobs! If you are able to work for startups (in terms of family life and stability) or migrate to startup-rich areas such as the west coast, you can find many exciting opportunities where advanced degrees are a benefit. I've since been approached by several startups, although I had to decline. Work through a recruiter if possible. They have direct contacts with the hiring parties, allowing you to "stand out". It is better to get a clear yes/no confirmation from a recruiter on whether a company might be interested in interviewing you, than it is to send your resume and hope that someone will ever see it. Recruiters are also a great way of bypassing HR. However, also beware of recruiters. They have a vested interest and will go to various shady practices and pressure tactics. To find a good recruiter, talk to a friend who declined a job offer he got through a recruiter. A good recruiter, to me, is measured in how they handle that. Interview for the jobs that require your core strength. If you're rusty or entirely unfamiliar with a technology around which the job revolves, you're probably not a good match. Yes, you probably have the talent to master them, but most companies would want "instant gratification". I got my offers from companies that wanted core Java developer. I didn't do well on places that wanted advance C++ because I am too rusty and not up to date on recent libraries. I also didn't hear from companies that wanted lots of J2EE experience, and that's ok. Finding companies that want core Java without web is harder, but exists in specific industries (e.g., finance, defense). This requires a lot more legwork in terms of search, but these jobs do exist. There are different interview styles. Some companies focus on puzzles, some companies focus on algorithms, and some companies focus on design and coding skills. I had the most success in places where the questions were the most related to the function I would have been performing. Pick companies accordingly as well.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >