Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 185/279 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Setting up Raid 1 Array for Home Server

  - by user1048116

  I'm not sure if this is even possible, but it's worth asking on here! Essentially I have a old machine at home (well, not old hardware wise, but I recently built a new gaming rig), which I decided to install a copy of W2008 R2 on and use as a file/backup server and media center'ish machine. As of now, it has a single drive partitioned into C and D, with D being the Data partition. I have happened to find an old 1TB SATA drive lying around at home, and was wondering if it's possible to setup a Raid 1 array in my rig within Windows without needing to lose everything on my first drive (or maybe even just mirror a specific partition, say the Data partition, as this is just what stores my photos etc). Maybe this isn't possible, but you never know :) Regards, T.C

  Read the article

• What specs to consider when buying SSD?

  - by penyuan

  When I bought "traditional" hard drives, I have been told to consider specs like RPM (5400, 7200, etc.), buffer size (16MB, 32MB etc.), and interface (IDE, SATA, etc.). (did I miss something?) What about solid state drives (SSD)? What are some important specs to consider in terms of performance and reliability? By the way, are SSDs just as reliable as traditional hard drives now? A couple years ago I heard they're not, but that's a "long time" ago now. Thanks for your answer.

  Read the article

• Why is Windows Explorer not responding?

  - by William Barnes

  I am having the seemingy popular problem with Widows Explorer not responding. I have tried the AUTRUNS and turned off everything recommended. I have run SCANNOW 3 times and it comes back clean. When booting in safe mode it appears to work. I read someplace that the problem could be a service program, but can't remember where I read it or how to do it. Something about turning off all service programs and then turning them back on one at a time. The problem is I don't remember what it said to do. Any and all help is greatly appreciated. as an FYI here is my system stats Sorry I can't access that part of control panel right now because windows explore not responding. I have an HPdesk top with a AMD quad core processor 1.8GB 1.5TB sata drives (a 1TB and a 500GB) Nvidia 8400 graphics card a 2mb internet connetion wireless 2 DBD R?W drives. Any help is greatly apprciated

  Read the article

• One hard drive missing after converting from ide to ahci

  - by user700859

  I have two 500GB SATA HDD in my desktop running XP. After converting from IDE to AHCI, the HDD I use to store data can no longer be accessed from XP. It shows only the first partition as 150GB, and data type is listed as RAW. However, if I boot into a live linux environment or if I pull that HDD out and connect it using USB, I can still get to all my files again. So I completely formatted the HDD into one single partition. But XP still does not recognize it. It still shows the disk as the 150GB partition and data type is still RAW. What's going on and how do I fix this? Thanks in advance.

  Read the article

• VMware + SQL Server - sqlserver.exe not using both CPU cores

  - by fistameeny

  Hi, I am working on a virtual machine that runs SQL Server Express (as part of Sage Line 50 Manufacturing). The details are as follows: Physical Server (host machine) - Intel Xeon Quad Core 2.1GHz - 4GB RAM - VMDK image stored on RAID-5 500GB SATA drives (7200RPM) - Running Ubuntu 10.04 Server 64 bit - VMware Server 2 Virtual Machine - Windows Small Business Server 2003 - Allocated 2 vCPU's and 2GB RAM - Using 100GB pre-allocated flat VMDK file The problem I have is that there is process that runs in SQL Server that is CPU intensive. On the old physical server that we migrated to the virtual machine from, this would utilise both CPU cores so the sqlserver.exe process would be running 100% on each of the CPU cores. On the virtual machine, it only seems to use one of the two CPU cores, meaning that the process is much slower to run. Question Is there a way to force SQL Server (sqlserver.exe process) to use both of the CPU cores, and distribute it's load between them? Is this a VMware setting that needs changing to allow processes to use both cores?

  Read the article

• Run disk error check on NTFS file?

  - by paulius_l

  I have a feeling that my system hard drive is dying. Benchmark kind of enforces it. Here is the benchmark of my system hard drive during low system activity: And here is the benchmark of backup drive: Furthermore, there are some files which I just can't touch because I get CRC errors and the hard drive activity spikes to 100% with operating speeds less than 1 MB/s while working with such files. I haven't yet tried swapping SATA cable as I have read this might cause the problems. Anyway, I would like to run some tests on specific clustsers where those files I am interested in are stored. I don't want to do the full chkdsk because it takes a very long time. I would like to either find the utility which executes the disk check directly on the clusters where the file belongs or a couple utilities where one tells me the cluster locations and another can check just those locations. How do I check and possibly fix disk errors where the files I am interested in are stored? Edit: S.M.A.R.T. info:

  Read the article

• SAN/NAS with high availability?

  - by netvope

  I have two servers that I plan to use for storage. Each of them has a few SATA disks directly attached. I want the storage to be available even if one of the storage servers is down (preferably the clients wouldn't even notice that the fail-over, although I'm not sure if this is possible). The clients may access the storage via NFS and samba, but this is not a must; I could use something else if needed. I found this guide, Installing and Configuring Openfiler with DRBD and Heartbeat, which apparently does the thing I want. It relies on three components, Openfiler, DRBD, and Heartbeat, and all three of them need to be configured separately. I'm wondering are there simpler solutions? Is using DRBD+Heartbeat the best practice for a situation like mine? I'm also interested to know if there are alternatives that don't depend on DRBD.

  Read the article

• How full is too full for mechanical hard drives?

  - by Sunny Molini

  I have heard many claim that it doesn't matter how full a drive is until it starts cutting into temp and virtual memory space. This doesn't make sense to me, given the nature of how the data is transacted on a hard drive. The inside of the platter presents less data per revolution than the outside of the drive does, by significant factors. The inside 40% of the radius of full size hard drive is used for the spindle, so only the outside 60% is used for data storage, but that still means that the inside track of a hard drive presents data 60% slower than the outside track. By my calculation, a Hard drive that is only 10% full should perform about 2.25 times faster than a hard drive that is 90% full, assuming that the flow is constrained by other factors. Am I wildly off base here? For all the drives I know, even the top speeds of the first 1% of the drive would be well within the bandwidth provided by a SATA 2 connection.

  Read the article

• how to change the default open-with program to a program on the second disk

  - by Scott????

  I have a 250GB HDD for my system and a 60GB SSD using a SATA port. I installed most of my applications on the SSD. There's a strange thing though. I can not change the default open-with program to a program which is on the SSD. I think it may be caused by permission so I gave my user a 'full control' permission on the security tab in disk properties. But changing permissions is not work. After I choose an application (I've tried Notepad++, Sublime, 7Zip, etc.), nothing is added in the below window: Also, if I install 7Zip on my machine, the right click menu items can not be added.

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• Would hybrid drive work after SSD failure

  - by lulalala

  Hybrid hard drive combines SSD with traditional hard drives. I know that SSD can fail much often than traditional hard drives. So I want to ask that, when the SSD part of the hybrid drive fails, would I still be able to use the traditional hard drive? If it won't work like that, then I will consider add-in SATA cards instead, as it delegates risk much better. EDIT: I guess it differs from model to model, so if yes what models would work. (I am evaluating Seagate DX for now)

  Read the article

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• ACHI drivers for W8.1 with amd

  - by LeiNaD_87

  I hope you can help me... I just installed a SSD (Samsung EVO 840) and windows 8.1 pro in my pc with M5A99X EVO ( chipset AMD 990X/SB950 ) motherboard. The SSD is installed in sata3 socket using a sata3 wire. The AHCI mode is ON in the bios. I configured the ahci controller and now device administrator looks like this: All works, but the speed of the SDD is very slow (like a HDD). Samsung magician doesn't recognize the sata mode neither the ahci. I tried to install more drivers but the system broke and I need to reinstall windows :( I tried many things from the web, but any works: Modify windows registy Use compatibility mode Modify the amd drivers and install it unsigned Thank you for your time!! EDIT to add a CrystalDiskMark benchmark

  Read the article

• "Input not Supported" on external monitor

  - by Shalan

  when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

  Read the article

• slow disk writes between host and guest

  - by Jure1873

  I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

  Read the article

• migrating storage to a different controller

  - by bellocarico

  Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

• Proper way to partition filesystem with Xen

  - by luckytaxi

  I'm coming from a vmware environment, wanting to play with Xen. I have a server with 2 x 500G SATA drives (no hardware RAID available, have to use software-based RAID1). My partitions are all RAID1 except for swap. I left a little over 400G for my VMs and I would like to use LVM for the disk images. For domU's swap, should I allocate that from the 400G or should that be coming from dom0's partition? I asked because I've seen numerous config options that shows either or.

  Read the article

• Is it dangerous to add/remove a hard-drive to a Windows machine which is in stand by?

  - by Adal

  Can I add a SATA drive to a Windows 7 machine which is in standby mode? The hardware supports hot-plug. Could pulling the drive out while in standby corrupt the data on the drive (unflushed caches, ...)? Does Windows flush before standing by? How about swapping a drive with another drive of different kind (SSD - mechanical disk) and size, also while in stand-by. Could the OS when waking up believe that the old drive is still there, and write to it and thus corrupt it, since the new one has different partitions and data?

  Read the article

• Windows 7 Refuses To Install To A Partition

  - by PP

  I have 4 HDDs in my PC on a Gigabyte EP45-UD3 rev1.0 motherboard on SATA ports 0-3 and running AHCI mode. Windows 7 refuses to let me install to any partitions or disks I select saying Setup was unable to create a new system partition or locate an existing system partition. I will get to the bottom of this, after I sacrifice my Friday nights and weekends to Microsoft (they don't just want my money, they want my soul). Keep tuned, if no one has the answer, I will find one. I suspect I have to rip out 3 HDDs so that the n00bs at Microsoft can actually deal with spinning media. Really angers me how paid-for-products are so inferior to Linux they don't even qualify to be called "software".

  Read the article

• Cannot fix induced 0x7b error on XP

  - by Malfist

  I'm writing a tool that will automagically fix the STOP 0x7B error that occurs when windows cannot access the hard drive due to driver issues (usually). I've wrote a tool that does everything the Knowledge Base article says to do. But it's not working. I'm inducing the issue by changing the bios SATA controller to AHCI, then moving it to another computer and updating it's registry. When I move it back to the other computer, nothing new happens. Can someone tell me what more I need to do?

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• How to force Windows to call the partition it installs on C:?

  - by maaartinus

  I'm going to install Windows XP from a CD and want to make sure it calls the partition it lands on C:. The target partition is the first one on a SATA disk, which is not the first one in my computer. There's no IDE disk there. I don't think I can swap the disks, as I'm using a fake RAID and really don't want to get problems with it. The target partition is on a normal disk. I know it may be unimportant, but I don't want to run in any problems I can avoid. I've seen a question slightly related to it, but I'm not going to install from a USB.

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >