Search Results

Search found 9044 results on 362 pages for 'bad sector'.

Page 186/362 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• Vostro 1520 crash during bios update

  - by Deadmilkman

  My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

  Read the article

• Prompt for credentials in a batch script

  - by Inteladu

  I am trying to perform a network copy of files via a batch script. However, as usual there are some networks where the 'copy' command fails saying 'Bad username or password'. And when I try using xcopy, it never works. I have also tried using, net use \\server\ password /user:domain\username net use \\server\ipc$ /user:domain\username password But none of these work. Any ideas on how I can accomplish this? I was also wondering if it is possible to prompt the ususal Windows login dialog for this...(just an idea) Any leads on this would be highly appreciated. Thanks & Regards, inteladu

  Read the article

• How do you limit the bandwidth for a file copy?

  - by wizard

  I've got an old windows 2000 box in a remote location with a T1 connection and a vpn to my location. I normally use smb mounts to transfer files but now it's time to decommission the server and copy it's backups to my location. I have about 40 gigabytes (compressed) to copy. I'm prepared for it to take a long time, but I have a few caveats. I need to limit the bandwidth so terminal service connections to the site are not affected I want to be able to resume a partial transfer There are a few small files and several large files (10-20 gigabytes). I'm familiar with rsync on *nix platforms but have had bad luck with windows and I don't know that it will really keep partially transfered files. What do you use?

  Read the article

• Why are my favorite websites becoming slower, over months?

  - by Wolfpack'08

  I spend a lot of my time at sites for watching online videos: youtube, gorillavid, thedailyshow.com etc. I used to watch the videos in full screen mode, and then that became very laggy. So, I started watching them with full-browser zooming. Then that became laggy. Recently, I've had to actually zoom out; otherwise, the video will lag so much that my PC locks. Could this be a symptom of my processor, RAM, or motherboard going bad? Has it, perhaps, anything to do with softwares like Chrome or the playeres the sites are using being updated?

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Iis multiple domain binding

  - by user2979484

  I've a server with vshpere running and one vm with Windows 2008 r2. I'm hosting a website on this vm. But I want to try to add another domain. Now I have 3 ip-adresses. 1 for vspehere. 1 for vm. 1 for 2nd domain. When I add a new site and edit the bindings to the last ip-adress (2nd domain) it doesn't work. I've added also a new network adapter on vsphere and edited in the windows network adapter. Could anyone help me out with this. Sorry for my bad english I hope you will understand it.

  Read the article

• Access logs show someone "GET"ing a random ip, why does this return 200?

  - by Wilduck

  I have a small linux box set up with Apache as a way to teach myself Apache. I've set up port forwarding on my router so it's accessible from the outside world, and I've gotten a few strange requests for pages that don't exist from an ip address in China. Looking at my access_log shows that most of these return 404 errors, which I'm guessing is a good thing. However, there is one request that looks like this: 58.218.204.110 - - [25/Dec/2010:19:05:25 -600] "GET http://173.201.161.57/ HTTP/1.1" 200 3895 I'm curious what this request means... That ip address is unconnected to my server as far as I know, and visiting it simply tells me information about my uid. So, my questions are: How is it that this request is showing up in my access_log, why is it returning 200, and is this a bad thing (do I need to set up more security)?

  Read the article

• What is this PHP process? It is crippling my server

  - by user1019588

  This process has been using 65% of my site CPU and has lasted for about 10 minutes now (aren't processes only supposed to go for a couple seconds?) It is obviously something with mysql. This makes sense because I have a lot of queries going, but something still seems a bit odd... This could have something to do with my bad PDO connection that I mentioned in the previous question. Perhaps I am opening too many connections or something like that? Here is the stats on it: Owner: mysql Priority: 0 CPU %: 61.1 Memory %: 0.4 Command:/usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/cvps54834319.myhost.com.err --pid-file=/var/lib/mysql/cvps54834319.myhost.com.pid Thanks for any help on this. I have over 10GHZ on my server so this is very concerning to me.

  Read the article

• Mystery process crashing machine by using all of the RAM - how to identify?

  - by wd40

  I have a Linux machine which runs ~10 in house written processes. Every other day(!) the machine completely runs out of RAM, goes into swap and becomes unresponsive. This happens quickly over a period of a couple of seconds, so it's not feasible to sit watching the machine until it dies. It's a sudden leak, not a gradual one, so top(1) doesn't give any indications something bad may about to happen. What is the best way of identifying which process(es) are causing the trouble?

  Read the article

• Speedup of fixing an openssl bug with 8192 bit key [on hold]

  - by rubo77

  This is related to this Bug-Report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747453 OpenSSL contains a set of arbitrary limitations on the size of accepted key parameters that make unrelated software fail to establish secure connections. The problem was found while debugging a XMPP s2s connection issue where two servers with long certificate keys (8192 Bit RSA) failed to establish a secure connection because OpenSSL rejected the handshake. This seems to be a small problem to be fixed but although there is an easy patch available to fix the issue in that bug report, no reactions are noticed so far.. The last patch that broke the 2048 barrier took 2 years to be implemented and only resulted in an increase to 4096bit, which seems to be a bad joke. Where would we have to report this to speed up the implementation for such an issue?

  Read the article

• Single PC Satellite Office Firewall

  - by Carl

  We are setting up a small, single PC office about 200 miles away. We plan on getting a cable internet connection but need some advice on a sufficient firewall. We would like to keep it under $100 if possible. 2 options we are considering are: Cisco RVS4000 (got some bad reviews) Linksys WRT120N (running DD-WRT) We need the ability for VPN but other than that we don't need anything special. We just want to keep that PC as safe as possible but easily maintainable because most work will be done remotely. What suggestions or solutions can you recommend for this application?

  Read the article

• Driver proboems for SH-S203N Samsung DVD drive

  - by dircowander

  My father jsut bought me a dvd burner Samsung SH-S202N OEM and installed it into my computer. The drive seems to be able to burn media fine. But when it comes to reading dvd's, audio cd's, it just skips. It can read them it is just skipping so badly to the point where the dvd's are unwatchable and cd's skip rather bad. I am looking for the latest firmware or driver for the Samsung SH-S202N OEM. Any advice? Thanks in advance. :)

  Read the article

• Should the virtualization host be allowed to run any service?

  - by Giordano

  I recently setup a virtualization server for the small company I'm running. This server runs few virtual machines that are used for development, testing, etc... My business partner works from a remote location, thus I also installed a vpn server on the virtualization host to make it possible for him to safely reach the company services. Moreover, again on the virtualization host, I installed bacula to perform the backup of the data. Is it advisable/good practice to do so or should I create one more virtual machine to do backups and VPN? Is it a bad idea to run these services on the host itself? If yes, why? Thanks in advance!

  Read the article

• domain works randomly

  - by mthenw

  Hi, I have problem with configuring bind9 on debian (lenny) server. Generaly speaking everything is working ok but sometimes I get 404 on few domains (eg. 4stopnie.com but after few refreshes in browser site loads) or I can't validate site with validator.w3.org (error '500 Can't connect to 4stopnie.com:80 (Bad hostname '4stopnie.com')'). Domains were moved from other server. After moving I changed serial number in zone file. $ttl 600 @ IN SOA ns.wpoznaniu.info. xxx.4stopnie.com. ( 2011011601 3600 600 86400 600) @ IN NS ns.wpoznaniu.info. @ IN A 80.82.21.196 www IN CNAME @

  Read the article

• Program to scale any OpenGL/DirectX window 2x larger?

  - by Neeb

  I would like to run some game on windowed mode, but its hard to see the game when my desktop resolution is huge. One solution could be to change my desktop resolution every time i play the game. But the bad thing is that my screen automatically smoothes the pixels when im using non-native resolutions, and the blurred pixels really makes it ugly and hard to look at. Is there some program to double the pixel size of any opengl/directx window without smoothing the pixels? I've tried multiple magnifying glass programs, but they all seem to make it blurred...

  Read the article

• Should I host my entire web application using https?

  - by user54455

  Actually my only requirement for using SSL encryption is that when a user logs in, the password is transferred encrypted. However after reading a bit about protocol switching, that an HTTPS session can't be taken over as an HTTP session etc. I've been asking myself if it's so bad to just have the entire application use HTTPS only. What are the reasons against it and how would you rate their importance? Please also mention: How much performance do I lose on server side (roughly)? How much performance do I lose on client side (roughly)? Any other problems on server / client side?

  Read the article

• Is there a way to import a scheduled task from windows 2003 (.job) to windows 2008 (.xml) ?

  - by Rodrigo

  I had some jobs to be moved from the old production server (windows 2003 server standard) to the new machine (windows 2008 server standard), but the new server is unable to read the old .job format, also the import wizard only imports from .xml job files (same version). Obviously I don't want to rebuild all the jobs by hand, but can't find a tool that makes the process a very little easier. I don't trust in Microsoft for this kind of tools, my previously experiences had been to bad (DTS - SSIS). Any ideas? Thanks in advance.

  Read the article

• Fix mail that has been put in deferred folder

  - by Safado

  So we have a little more than usual deferred mail on our Postfix server, so I started to look through the messages to make sure we weren't hacked and sending out spam. Everything is fine and it turns out that a bot had filled out our Request Info form multiple times with bad info. However, I did find one that was a legitimate request for more information about our company and I noticed that it isn't sending because they fat-fingered the address with gmal.com. Is there a way I can correct that and have Postfix send it out? This is on a CentOS server.

  Read the article

• Why will multiple dvd/cd-rom drives stop reading?

  - by ddc0660

  I'm having difficulty with two dvd/cd drives. When I updated from XP to Vista, I noticed they wouldn't work. I could add cds or dvds to the drives and they would attempt to read the disk, but never "found" a disk in the drive. Vista showed the drives existed without problems. I updated their drivers and nothing changed. I thought perhaps, oddly, both drives were going bad. Then I got Windows 7, and I figured I'd have to do some gymnastics in order to get it onto my system without a working disk drive. However, I can boot from the Windows 7 disk fine! I installed 7 hoping that it was a Vista problem and I'd reclaim my drives, but that is not the case. The same symptoms persist. Thoughts?

  Read the article

• How can I avoid logging file not founds commonly caused by vulnerability scanners?

  - by agweber

  My apache logs are pretty much full of 'admin.php' not found or unable to stat and similar statements for wp-login.php, default.php, and so on that are often sought after by vulnerability scanners. Can I configure apache to avoid logging these statements for certain files? I don't want to filter out all file not founds as I'd like to fix bad links that I may have put out over the years that no longer correspond to the same files. I can use a tool like fail2ban or denyhosts, but from previous experiences it comes from so many places that those errors are still going to pile up, and the reducing those error messages are what this question is asking about.

  Read the article

• Can I use applescript to click buttons in background?

  - by Giorgio

  Sorry for this generic and probably bad-written question. I've never programmed in applescript, but I'm quite familiar with other coding language. I'm in the need of clicking on 2 sequential button inside the lobby of a software (when you click the first a popup appears and we should click 'ok'). However things are a little bit more complicated then this because: 1) the lobby of this program isn't in foreground: it's covered by other windows opened. (I don't have experience so I don't know if this represent a problem). 2) there should be a timer and the program should click this button at regular intervals. Is this feasible with applescript?

  Read the article

• How to access network shares, printers, etc.through Windows 7 Built-In VPN?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• How to save your Linux state (suspend to disk) periodically to recover from crashes?

  - by WoLpH

  One in a while my laptop crashes/dies because of a bad/empty battery, crappy wifi driver or whatever other reason. For a while I've wondered if it's possible to force Linux to periodically save the state (like vmware snapshots) to disk so you can restore from that with possibly slightly outdated work but at least with all of your apps open in the same state you've left them. I don't really see the point in having to boot everything from cratch constantly, although KDE saves your state on logout, that doesn't happen periodically (by default) either. It would make it much nicer to recover from your crashes if your ram was written to disk periodically. Anyone know if there's a system call to do this without also shutting down the machine? Even a manual button to save the entire state would be nice.

  Read the article

• HIGH CPU USAGE FROM SUSTEM [on hold]

  - by user195641

  CAN ANYONE EXPLAIN THIS ? IT IS BAD FOR MY CPU ? CAN ANYONE HELP ME ? I DONT KNOW WHAT TO DO ! THERE IS HIGH DELAY WHEN I OPEN A NEW TASK HOWEVER ITS A INTEL CORE DUO EXTREAMA 3.0GH THANKS There are about 100 items monitored with the agent. They are also monitored on other identical hosts where Zabbix agent does not consume so much of CPU. Agents send collected data to Zabbix proxy. The agent configuration is default. The host CPU has 8 cores (2.4 Gz). The smallest time value for monitored items is 60 seconds.

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >