Search Results

Search found 31410 results on 1257 pages for 'disk based'.

Page 186/1257 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

  • Iomega Home Media Network Hard Drive: Accesing the data in the disk?

    - by JJarava
    Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

    Read the article

  • All Xen domU LVM volumes corrupt after reboot

    - by zcs
    I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

    Read the article

  • Is a "failed" RAID 5 disk really no good?

    - by GregH
    This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

    Read the article

  • DBan not working because disk has bad sectors? [migrated]

    - by canadiancreed
    Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

    Read the article

  • Safe mode boot with no change on screen but ongoing hard disk activity - why?

    - by omatai
    I have a machine with a dying hard drive - bad sectors are starting to multiply :-( The first sign (24 hours ago) was that it had an unmountable boot volume. At this time, I tried booting to safe mode with command prompt, which worked, after which I rebooted normally and ran a chkdsk. It has since been working as well as I could expect, but slowly getting less reliable. So I scheduled another chkdsk on both partitions (C: - boot, D: - data), having freed up a lot of space on both partitions to give Windows a little more scope for repairs (hopefully?). I then rebooted. On reboot, it protested about the unmountable boot volume again, so I booted to safe mode. I got the same list of drivers loaded as yesterday, and then no change to the screen for the past 2 hours. However, I see a flickering hard drive indicator light - not always on, but seldom ever off. What is happening? Is the chkdsk that runs in safe mode one which produces nothing on the screen and so chkdsk could be doing its thing... or is Windows still trying (but failing) to boot into Safe Mode?

    Read the article

  • Moving symlinks into a folder based on id3 tags.

    - by Reti
    I'm trying to get my music folder into something sensible. Right now, I have all my music stored in /home/foo so I have all of the albums soft linked to ~/music. I want the structure to be ~/music/<artist>/<album> I've got all of the symlinks into ~/music right now so I just need to get the symlinks into the proper structure. I'm trying to do this by delving into the symlinked album, getting the artist name with id3info. I can do this, but I can't seem to get it to work correctly. for i in $( find -L $i -name "*.mp3" -printf "%h\n") do echo "$i" #testing purposes #find its artist #the stuff after read file just cuts up id3info to get just the artist name #$artist = find -L $i -name "*.mp3" | read file; id3info $file | grep TPE | sed "s|.*: \(.*\)|\1|"|head -n1 #move it to correct artist folder #mv "$i" "$artist" done Now, it does find the correct folder, but every time there is a space in the dir name it makes it a newline. Here's a sample of what I'm trying to do $ ls DJ Exortius/ The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ I'm trying to mv The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ into the real directory DJ Exortius. DJ Exortius already exists, so it's just a matter of moving it into the correct directory that's based on the id3 tag of the mp3 inside. Thanks! PS: I've tried easytag, but when I restructure the album, it moves it from /home/foo which is not what I want.

    Read the article

  • Raid HDD Boot up

    - by user234695
    My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

    Read the article

  • Is my Windows partition too far down on the disk?

    - by Trevor Alexander
    I have /boot/ on /dev/sda1 (1GB), followed by my Linux root LVM on /dev/sda2 (1.3GB). Finally, I installed Windows 7 on /dev/sda3 in the remaining 700GB of space. When I select Windows 7 in the grub menu, I get something like the following error and am thrown to grub4dos: find --set-root --ignore-floppies --ignore-cd /bootmgr Error 15: file not found Unable to locate necessary tables for adjustment. None of the options in grub4dos return anything but the above error. I heard that 1TB is the upper limit for locating Windows 7 partitions; is this true? How can I fix the above?

    Read the article

  • When trying to copy a virtual disk in VMware vSphere client, I get an errror.

    - by Zak
    I'm pretty new to all the VMware world, so this is probably mainly a question about the right set of documentation to look at. I'm trying to clone/copy a VM that I installed on an ESXi installation. I was trying to follow along with the top example here: http://serverfault.com/questions/16320/is-there-a-way-to-clone-an-existing-vm-on-an-esxi-server-without-having-to-re-imp However, I'm using the vSphere client to connect to the ESXi box and manage it, and the vSphere client is telling me it won't let me rename the vmdk file. The real answer I want is how do I clone the VM I installed if I want to spin up 5 copies. Is there another utility I can use to copy the vmdk file, then create a new virtual machine using it? Any idea why they nerfed the feature in vSphere client?

    Read the article

  • Windows data backups with alternating removable drives?

    - by luke
    0 vote down star I have a removable disk drive (RD1000 from Dell), and I am looking for backup software that will allow me to backup every night, and every morning switch to the alternate disk. There is only one directory structure to back up, what I want is two copies, one which I will take home with me every night, one which will be backing up every night, and when I get in in the morning, I will switch them. So for instance I have disk "a" and disk "b". On Monday night I want to go home with disk "a" and leave disk "b" in the drive, so that a scheduled back up will be written to it. On Tuesday morning I will come in and swap disks, and I will take "b" home that night, leaving "a" for the backup. And so on for the remainder of the week. FOSS software preferred, Freeware acceptable, paid software as a last-ditch effort. Oh, btw I'm stuck with Windows 2000 Thanks in advance.

    Read the article

  • How can I free up disk space in my Ubuntu Hardy Heron install?

    - by rvs
    I'd like to make some room on /dev/sda1 without necessarily having to remove a whole bunch of applications (I've already gone through and deleted all frivolous apps). This is the state of /dev/sda1 currently: Dir: / Type: ext3 Total: 9.4GiB Free: 488.6MiB Available: 0bytes Used: 8.9GiB EDIT added du output from comments below: 769068 /var/lib/mysql 351208 /usr/lib 297060 /usr/local/bin/eclipse/plugins 184124 /usr/bin 175924 /usr/lib/openoffice/program 143940 /usr/local/bin/eclipsePHP/plugins 92520 /boot 81200 /opt/android-sdk-linux/add-ons/google_apis-6_r01/images 79964 /opt That's funny, because the tables in /var/lib/mysql are the reason that I ran out in the first place. But I need them, and room for many more possibly large db's.

    Read the article

  • My C disk show 33gb less space then i have bcs of hidden or encrypted files i cant find

    - by Peter
    Hello I was hoping some one could help me my drive has 92gbs used space, 95gbs free out of 220 partition 33gbs in the air i cant find, already did cleanup, emptied recycle bin, history and temp files also and I believe sin Ive seen before its possibly space my brother used with a program he uses to hide (possibly encrypted) files dont know the name just seen him do it on usb and pc dont appear visible or hidden and result is what you read above is there any way of finding them to delete them hence my brother is nowhere to b found or could it be something else??? already tried freecommander also.

    Read the article

  • what web based tool, to allow a non-technical user to manage authorized keys files on a Linux (fedora/centos/ubuntu/debian) server

    - by Tom H
    (Edit: clarification below) We have a number of groups of developers that change frequently, and a security policy to require individual logins to servers using rsa or dsa public keys, which is achieved via the standard method of adding id_dsa.pub to their authorized keys file. I am using chef to sync the user accounts across machines, however our previous method of using webmin to manage the user passwords is not designed for key based auth, and hence is not easy to use for non-technical users. The developers are logging in from the WAN using ssh, they can either provide their own key, or an administrator will send them a private key. The development machines are located in the cloud and we have a single server available to host the master set of accounts. Obviously I could deploy ldap or other centralised authentication system, but that seems a bit over blown when webmin worked well for the simple case. It is easy to achieve synchronised users, groups and passwords across a bunch of low security development boxes using webmin clustered users and groups. However looking at the currently installed webmin it is not so easy to create the authorized keys as it is to create user accounts and passwords. (its possible, but its not easy - some functionality is in the usermin module, or would required some tedious steps) Ideally I'd like a web interface that is pretty much dedicated to creating users and groups, and can generate key pairs on the fly, and can accepted pasted in public keys to add to the users authorized keys file. If the tool sync'ed the users and keys as well, that would be great, but I can use chef to do that part if the accounts are created correctly on the "master" server.

    Read the article

  • How can I change the size of my SD card partition on os x 10.6.8 using gparted or disk utility?

    - by user1068636
    I"m running OS X 10.6.8 and I would like to use gparted to resize a partition on my SD card by following instructions on this page: http://mitchtech.net/easy-gui-install-re-partition-raspberry-pi-on-ubuntu/ However, it appears like gparted is suitable only for linux environment. I was wondering what alternatives do I have on os x to achieve increasing the size of the partition on my SD card? Would appreciate all / any advice.

    Read the article

  • Windows 2008 R2: can't extend C drive, mystery partitions

    - by wfaulk
    I have a Windows 2008 R2 server running under VMware ESX 4.0.0. I have reallocated disk space to it in order to extend the C drive, but Disk Management has "Extend Volume" greyed out. DISKPART shows more partitions than Disk Management shows, including one after the volume I'm trying to extend, which would explain why Disk Management isn't allowing the extension. Disk Management shows: System Reserved / 100MB NTFS / Healthy (System) (C:) / 39.39 GB NTFS / Healthy (Boot, Page File, Crash Dump) 10.00 GB / Unallocated DISKPART shows: Partition 1 Dynamic Data 992 KB 31 KB Partition 2 Dynamic Data 100 MB 1024 KB Partition 3 Dynamic Data 39 GB 101 MB Partition 4 Dynamic Data 1024 KB 39 GB My question at this point is: what the heck are partitions 1 and 4, where did they come from, why doesn't Disk Management show them, and, most importantly, can I delete partition 4 in order to extend partition 3?

    Read the article

  • Unable to boot to Ubuntu. Inconsistency in disk, X server didn't start. Illegal blocks in Inode

    - by becomingGuru
    I am unable to boot into my Ubuntu system. First I get that fsck died with exit status 4 Then I try to do it manually as prompted and I get that an Inode has illegal blocks and asked to clear it. Upon googling, I found that is because my HD has some problems I booted via Live cd and took a dd of the entire Ubuntu on an external HDD just in case. Is it safe to clear all the illegal blocks. How do I safely restore my environment if I replace my HD. Is there any thing i can do in the meanwhile to continue to use my laptop without significant loss of data. Perhaps a related error, the x server fails to start

    Read the article

  • Any Recommendations for a Web Based Large File Transfer System?

    - by Glen Richards
    I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

    Read the article

  • added ip-based virtual host to sites-available and created symlink to sites-enabled...but new domain

    - by lililili
    I added ip-based virtual host to sites-availble and created symlink to sites-enabled, but new domain times out. When i navigate to mynewdomain.com it says connection timed out. NameVirtualHost 12.12.12.12 <VirtualHost 12.12.12.12> ServerAdmin webmaster@localhost ServerName newdomain.com DocumentRoot /var/www/newdomain.com <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost>

    Read the article

  • Did Acronis True Image Home 2012 clone operation "lock" my BitLocker disk?

    - by Thomas Eyde
    After trying to clone my primary drive, which requires a reboot to proceed, BitLocker detected that the boot sector had changed and required the recovery keys. Not a good situation to be in on Sunday evening when it is your IT-department who hold the keys. After talking with the guys at IT, I have tree suspects on why BitLocker locked me out: The newly added, second hard drive in my machine. The changed boot-order in BIOS. The changes True Image did in order to do its things on boot. As an end-user, I should never have to end up in situations like these without any warning. I would like to know what really happened, so I can inform Acronis on how they can improve their product to avoid this situation in the future.

    Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >