Search Results

Search found 8398 results on 336 pages for 'live coverage'.

Page 186/336 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Ubuntu 14.04 disk utility SMART self-test failed threshold not exceeded

  - by user2323470

  I'm using the "Disks" program in Ubuntu 14.04 (live DVD) to assess the health of a drive I suspect is failing. However, when I first opened the program, it showed that the overall health was OK and all assessments are OK as well. I then tried to run a short self-test, but now the overall assessment shows a red "SELF-TEST FAILED". In the details section it says "Last self-test failed (read)" and "threshold not exceeded". All individual assessments are still OK though!! What I don't understand is, does that mean that the test executed and determined that the drive is a goner, or does it mean that the test didn't actually execute properly?

  Read the article

• Can I use two of the same type of PCI Sound Cards in one computer?

  - by Eamon

  I recently purchased two Rocketfish 5.1 PCI Sound Cards from Best Buy. These are going to be used for audio production and radio broadcasting, so one card can handle live audio, the other can handle cue audio. After installing both cards, I get strange noises from the broadcasting program, and then the computer locks up solid. I have to hard restart to get it back up. This only happens when the two audio cards are installed on the computer. I have tried switching them around to different PCI slots, with the same result.

  Read the article

• Recording Skype Video

  - by Leah Peterson

  I have two problems - When doing a Skype video call, I can't see the other person. Skype says both my input and output are fast/good. I need a good recording program that will save both sides at once in a podcast. I've been playing around with Vodburner, but it seems to be very temperamental. I can't get anything longer than 30 seconds to save and even when if it does save, the file isn't compatible with Windows Live Movie Maker, even when I change the extension to .MP4 or .WMV. I tried to downlowd the format changer http://www.mediacoderhq.com/ that Vodburner suggests, but only got errors. I'm using Windows 7 with 62 GB free.

  Read the article

• Software RAID 10 on Linux

  - by vpetersson

  For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

  Read the article

• How to reset Administrator password Windows Server 2003 installed on Vmware?

  - by Cucumber

  I want to reset administrator password on Windows Server 2003. OS installed on VMware server VMware Server version 2.0.1. And problem is this: when i try to boot from live cd, after boot disk with Windows not detected. I tried to use Windows Admin Hack - Linux Boot; Hirens.BootCD.10.4; ophcrack-xp-livecd-2.3.1.iso None of these programs did not see the hard drive! Any ideas? Thank! ADD: I want to reset LOCAL admin password, not domain. And this computer are not domain controller.

  Read the article

• Employee Monitoring software

  - by nute

  I am looking for an employee monitoring solution, that would allow us to remotely connect to our computers to see what is happening live, and preferably having some recording capabilities such as snapshots, URLs visited, etc ... I've looked around the web and most softwares I found were from unknown companies, had crappy websites, and made me feel like their either wanted me to install a virus on my computer, or to scam me. Most also seemed to have planted "reviews" online most likely written by themselves. Basically, anyone has experience with a trustworthy company to accomplish that? Thanks

  Read the article

• Help make sense of a KillDisk error/log

  - by user284194

  I have a hard drive that I've been trying to reformat. I tried reformatting it in the windows XP and 7 installers, and in an Ubuntu live cd with gparted. I tried using dd to 'zero' the drive as well with no success. Finally I ran across KillDisk after a search. I tried to zero the disk again with KillDisk and after 8 hours of zeroing I get the following errors in the log: ----------------------------------------Erase Session Begin--------------------------------------- 2010-03-23 19:35:54 Active@ KILLDISK for Windows Build 5.1.39 started Target: WDC WD2500KS-00MJB0 232.9 GB Located on: WDC WD2500KS-00MJB0 (Serial number: WD-WCANK9604799) Erase method: One Pass Zeros (1 pass) Passes: 1 Bad (unwritable) sectors detected from 1701 to 488397167 on Hard Disk 1. Error (the handle is invalid) refreshing device Hard Disk 1. Error (the handle is invalid) reading sector 0 on 81h. 2010-03-24 02:28:25 Total number of erased device(s): 0, partition(s): 0 -----------------------------------------Erase Session End---------------------------------------- Is the drive dead?

  Read the article

• Stuck with Visual Studio 2010 Beta 2 errors

  - by Clueless

  A ways back I installed Microsoft Visual Studio beta 2. Today I installed Visual Studio 2010 from Dreamspark (the one with the activation key baked in). This resulted in an install with no place to put an activation key (I don't have one anyways), but I still get the following error when I try to start it: Your Microsoft Visual Studio evaluation period has expired. You will need to upgrade Microsoft Visual Studio to the latest release. This didn't go away with a complete uninstall and reinstall, and I have no idea how to fix it. A quick internet search reveals that this is the error message from Beta 2 after the date at which the RTM version went live. I have a feeling that the message is due to some hanging registry entries (I went through the manual uninstall instructions here). Does anyone know how to find and eliminate all vestiges of Beta 2 or something?

  Read the article

• How could I safely fix my walking "dead pixel" bug?

  - by Cawas

  I need suggestions. I've got a live little bug inside my macbook pro screen for 2 days now. I've tried to film it using my iPhone, but it ain't that good. :( Should I try to open it? o_O C'mon, looking for ideas here! :) edit: Here's an alike video. It's not moving anymore for now... I hope it isn't dead! Right when I've found a possible solution along with many ideas on that link: suction cup; monitor off and lamp on to attract it out; scratching the screen (made it move a little); and got to know there's no warranty for this "feature" (also known as bad design in a jargon). edit2: It's been "fixed" on its own. Just check the answer.

  Read the article

• Revert "Deny" permissions in Windows 7

  - by saurabhj

  I made a very dumb mistake and I am hoping there is a way to fix this without having to boot in through a Linux Live CD and extracting the data. My user login to my Windows 7 system is: John John is part of the Administrator's group. I have a folder called "C:\Users\John" I tried to make this folder accessible to ONLY John (and deny from all other Administrators) by going to the Folder, Right Click Secturity tab and then selecting all the checkboxes under "Deny" while having selected the "Administrators" group. As a result, I cannot access this folder from any of the accounts: "John" and "Administrator" as both of them belong to the Administrators groupd and deny permissions out-weigh the "Allow Permissions" Is there any way I could revert this back? Thanks a million!

  Read the article

• Re-streaming RTMP stream

  - by Yvan JANSSENS

  I have a set of local RTMP stream servers in my network, but I want them to be reachable outside. The bandwidth is too narrow to serve multiple clients on the streamservers of my network, so the idea is to pull the local RTMP streams on a computer serving as a gateway, which pushes them on his turn to a hosted streaming provider. It is not possible to let the sources of the stream push their stream directly to the server outside due to network policy restrictions. Scheme of what I'm trying to accomplish: Internal network | External network ------------ ------------ ----------------------- | internal | <---- | Gateway | ------> | streamserver outside| | streams | ------------ ----------------------- ------------ | ^ | | | ----------- | | clients | | ----------- My question now is: which application which can pull a live stream from an RTMP source (Flash Media Server) and push it to another one (Flash Media Server at hosting provider).

  Read the article

• Need assistance setting up Linux Router with 2 public lans

  - by user195407

  I was assigned a.b.c.10/30 (Public IP) for my router and given a.b.c.9 as the gateway. I was also assigned x.y.z.128/25 (Public IP block) for my use. I want to setup a Linux router to handle this situation. My Linux box has 3 NICs, eth0 is a.b.c.10, eth1 I have assigned x.y.z.254, eth2 is unused at present. I have eth1 connected to a network switch, and several devices connected. Let's say box A is x.y.z.129 with a gateway of x.y.z.254. I have not connected to the network yet, as it is not live. What settings do I need to make, beyond adding the 2 network definitions to the cards and having "route add default gw a.b.c.9 eth0"? I may add a private 192.168.100.0/24 lan to eth2 later.

  Read the article

• Why do I get Apps in Windows 8 listed as 'Not available' sometimes?

  - by keith

  What affects this, and if possible, how can I prevent this? Or maybe how can I get them to be available sooner or all the time? This pretty much happens to my game apps connected to Xbox live and a few others from time to time. It never happened before I updated the computer, but I haven't had the PC long anyway. Could it be that after updates that need a restart it does this as well (I've done two of those so far)? Anyhow, I'm frustrated, I keep clicking on a app and it not responding. The problem fixes itself at some point, but I have not been able to stare at my PC long enough to figure out how long it takes or what happened.

  Read the article

• Windows 7 USB power lose after a few seconds / minutes

  - by Stefan Dunn

  My friend's computer has a problem where the USB ports causes problems with the power of some devices connected to the computer. The USB mouse has no problems, however the Wireless Adapter looses power after around 20 seconds of use and USB Flash Drives cause the computer to either freeze, lose power (and become unresponsive) or become disconnected (still shown in Device Manager, but not in My Computer) when trying to transfer any type of file to / from the computer. I have a suspicion it's the Motherboard but could it also be a Software problem? Tried a new case, RAM, CPU and GFX Card which had no effect. The problem occurs on both the Front USB and Back (Motherboard) USB Ports. UPDATE: Tried the USB devices with an Ubuntu Live CD and they work fine, could this mean it's a problem with Windows (x64)?

  Read the article

• Network keeps disconnecting - Repairing solves it. Router configuration

  - by Joao Carlos

  My network connection keeps going insane, it will keep normal applications connected, like TeamViewer and MSN, but webpages will stop loading (Problem loading page). Everything looks connected and works like a charm, but webpages and new connections wont work. If I press "Repair" in the network connections to restart the adapter, it will work. This happens on WIRED and WIRELESS connections, both on Windows and on MacOSx. I have had this for years (different computers, routers, cities), but I never figured it out. I learn to live with it, but, I think theres probably a solution. What must I be doing wrong if this keeps happening? You guys have same thing?

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• Why do I see router and not my real IIS?

  - by Tim Tom

  I am trying to access IIS through web but unable to do so. Basically I have a router (which functions as router and modem) that is given by ISP and I have another router connected to the router given by ISP. My ISP's router can be visited through 192.168.0.1 and the router that I connected to ISP's router can be visited through 192.168.1.1 Please see my ISP's router: As you can see I have DMZ enabled for my router of 192.168.1.1 Now please see my router of 192.168.1.1: As you can see I added a virtual server for port 80 where 192.168.1.125 is my private IP. I rebooted both of my modems an tried to visit my IP from: http://www.whatsmyip.org/ and after doing so, when I type my live IP I still see my router of 192.168.0.1 instead of my IIS. What am I missing? Note: I have disabled Firewall on both of the routers. Any help would be appreciated.

  Read the article

• AIX network parameters to close TCP sockets of unplugged devices

  - by ADD Geek

  Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

  Read the article

• Ubuntu dpkg error , after crash and filesystem error recovery

  - by Radian

  Ubuntu recently crashed , causing it's partition damaged ( which is EXT4) and Ubuntu was unable to boot , because it couldn't mount anything , only displays Busybox So I used the Live CD to run fsck on the partition, which fixed it , but deleted some nodes Now Ubuntu is working , but some files were missing , for example I lost the Panels configurations and Chromium's Extensions The Most Annoying problem , that there is some files corrupted , for example when I try to install any program, I got this (Reading database ... 95%dpkg: unrecoverable fatal error, aborting: files list file for package 'libservlet2.4-java' is missing final newline I tried these commands dpkg --configure -a apt-get -f install and from GUI , Synaptic Package Manager Fix Broken Packages So this file "libservlet2.4-java" Does anyone knows what it does ! and where it's location ? and how can I fix/get-correct-version-of it ? Also , is there any way I could tell Ubuntu to Check for ALL it's file , and if there is something corrupted it should recover it form the CD ?

  Read the article

• File Saving Sometimes Fails

  - by YellPika

  When I attempt to save files, it sometimes (randomly) fails. In Blender, I sometimes get "Version Backup Failed: File Saved With @". In Visual Studio, building sometimes fails with an error message indicating that the target file/exe cannot be overwritten. If I wait a bit, I can save fine. It's almost as if programs are taking an abnormal amount of time to 'let go' of the files. What could be causing this behaviour? This seems to be caused by Windows Live Mesh monitoring my files, and locking them whenever it uploads the new versions (BAD considering the amount of times I save my files, even redundantly). Any suggestions to work around this behaviour? Should I switch to a better service to sync my files?

  Read the article

• Idle hard disk makes noise.

  - by ULTRA_POROV

  Like a fan or something. I checked it. I stopped all fans (cpu, video, psu) and the noise was still there. I read online that it might be a motor or something. I have put a great deal of effort making my pc quiet. Installed a quiet psu and cpu fan, reduced the fan speed of my video card, bought a ssd... But my drive for data makes this noise. I would never have expected that. Do all hard disks make this kind of noise? I guess most people won't notice it because of the other fans they have in the system, I however can hear it quite clearly because all my other fans are almost silent. So should i get a new one or should i just live with it, considering that i might end up with a drive that also makes this noise.

  Read the article

• grub error: symbol 'grub_puts_' not found

  - by ladaghini

  I updated from Ubuntu 9.10 to 10.04, and after installation, the computer restarted. When grub loaded, all I get is a screen that says error: symbol 'grub_puts' not found and a useless grub prompt that looks like grub_rescue I've tried reinstalling grub from the livecd (usb drive) following this guide: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows to no avail. Sometimes, when I start up from the live usb, linux doesn't recognize the harddrive at all. It's not in the places menu, nor does fdisk list anything. If anyone can help fix up grub so it recognizes and boots up the two os's I have installed, I'd appreciate it. Also, I know little about grub, so try and make it easy to understand.

  Read the article

• Converting Outlook Express csv adress book and dbx files into Thunderbird on W7

  - by PiotrK

  Recently I changed my OS from XP to W7. I made backup of any Outlook Express messages (the dbx files and adress book as CSV). On W7 I want to import that data into Thunderbird. There is option for importing from Outlook Express, but it is looking for live application data (I can't specify directory with real files myself) and there is no Outlook Express installed on W7 so I can't just import it back to it and then into Thunderbird. How can I import that data into Thunderbird?

  Read the article

• Resize primary partition

  - by telebog

  I have a hdd with the folowing partition table 12Gb Primary Partition (ntfs) 140Gb Extended Partition (ntfs) I want to install windows 7 and I need more space for the Primary Partition. The problem is that when I resize partitons I obtain: 12Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) 30Gb Free Space So I can't allocate the free space to primary partition because the free space is at the end of the disk. Is there a solution to extend the primary partition as: 42Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) without repartitioning the entire disk? I used partition magic, gparted-live-0.4.6-4 and others with no success. With the Disk Management from Vista I manage to extend primary partition, but made my partitions dinamic.

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >