Search Results

Search found 5723 results on 229 pages for 'turing machines'.

Page 186/229 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

• Can't authorize a server for Amazon RDS

  - by Parris

  We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

  Read the article

• Multiple Devices connecting to VPN on CentOS server

  - by jfreak53

  I am looking for a solution as to what would be the VPN software for multiple OSes and Devices. I currently have 15 systems to connect to a VPN. I was using Hamachi from LogMeIn but their lack of Android support really upsets me, and their limited support for Linux OSes is also a let down. 90% of my systems are Ubuntu 11+ systems, only 2 are Windows XP. But I also have a few people, maybe 3 that need to connect to it from Android devices. This is where Hamachi has let me down and I want to move to my own VPN solution. The server would be a simple VPS running CentOS. So I need some VPN software that allows connection of those to a Linux based server. I wanted to go with OpenVPN, but I am under the opinion that in any OS you have to have their software to connect to the VPN. Ubuntu supports VPN's out of the gate, but OpenVPN requires extra software to be installed, I don't want this if I can help it. Same with Windows and same with Android. Plus android mostly requires rooted devices for OpenVPN, at least from what I've read. I was looking at maybe L2TP, but I'm not sure how easy it is to get Ubu systems connected with it as I haven't found much on the subject, let alone Window's XP machines. I know Android connects out of the gate to it. I don't know much about L2TP but I know it's a pain to get running in CentOS from what I have read. Now the last option is some sort of software for PPTP but I've never read anything on it and don't know if all systems are compatible with it. What would be your solution to these devices and multiple OSes? OpenVPN seems to be my heading I just don't like it that it always requires software to run and rooted Android Devices. Any solutions for this and install solutions? Maybe a different OS for the server like Ubuntu would make another type of VPN easier?

  Read the article

• Issues regarding internet connectivity

  - by andySF

  Hello. My problem started when Yahoo Messenger stopped connecting. I've tried to see if Internet Explorer was working but will not load any page. The diagnostics of Internet Explorer says that is something wrong with my dns(using just ip of google or yahoo or my local webserver was not working). I use Windows 7 and at the moment i've had Internet Explorer 8 and after a lot of failing updates to ie9 I've successfully install the Romanian version of IE9(now i have ie8 after a system restore). Then I installed the service pack 1. I've done a lot of things and I will try to enumerate them, but my problem persists. Settings from Yahoo Messenger and Internet Explorer are OK. I've try to reset winsock and ip from netsh. I've scanned my pc with spybot, mallwarebytes, Trojan Remover(simplysup), Loaris Trojan Remover, Avast, Nod32, Kaspersky, Bitdefender,alot of registry cleaner including CCleaner and maybe others that I cannot remember now. I reset the registry permissions using subinacl. At a moment my files permissions was set jut to "trusted installer" and I've put the permission back to files and folders using the model of other windows 7 machine. I have try so many things that now i'm stuck in a loop using different security tools to check for problems. Oh, and my virtual machines are working just fine.(I'm using VirtualBox) Please Help. PS, Reinstalling Windows is not an option. Thank you!

  Read the article

• Setting up VPN with Snow Leopard Server and Linksys router

  - by SueP

  I'd like to get VPN going so I can log in to the office securely from home. I'm using Snow Leopard machines everywhere, and currently have Airport Extremes set up at home and at the office. I have a mac mini with Snow Leopard Server that I'm going to move to the office to act as my server. I just bought a Linksys 4-port router because it says it does VPN (model RVS4000). My problem is, I don't have a clue how to set this thing up, and the more reading I do, the more confused I get. Do I need two of these routers, one at each end? My laptop and iPad claim they can do VPN, so I was assuming I only needed one VPN router? At this point, I literally don't know what questions to ask, or where to plug this thing in. Presumably, between the modem and the airport, but...? If somebody can walk me thru some really basic setup, I'd be very grateful. Right now, I feel like going outside and screaming for a while. But that might attract the local cougar, and after the prints I saw on the arena this afternoon, I don't want to draw its attention. :-)

  Read the article

• About to go live: virtual dedicated server or cloud?

  - by morpheous

  I am about to launch my startup company, and we will be going live in a few weeks time. We have really tight budgetary constraints, since we are bootstrapping - and would prefer not to raise external capital. I cant use shared hosting because I need more control of the server machine (for technical reasons - e.g. using proprietary extensions to PHP, Apache and in the database layer as well) - but want to control costs and dont want to go fully private server route, until we have determined the market size etc. So the only real alternatives AFAIK is between virtual server and the cloud. At the moment, cloud services seem a bit "vague" to me. My understanding is that they allow an entity to outsource its IT infrastructure, which in my mind (at least), is indistinguishable from what a hosting provider provides (at least from a functional point of view) - I would like to seek some clarification on exactly what the difference between the two is. Back to my original question, my requirements are: IT infrastructure that can scale with growth Ability to have control of the machine (for e.g. to install our internally developed libraries etc) Backup software that is flexible and comprehensive enough (yet simple to use), that allows a (secured) backup strategy to be implemented. On this issue, I have always wondered where the actual backed up data was stored (since the physical machines are remote, and one cant get access to any actual tapes etc backed onto). I would also like some advice and recommendations in this area. Regarding data size, I am expecting the dataset to be increasing by a few megabytes of data (originally, say 10Mb, in about a years time, possibly 50Mb) every day. As an aside, I have decided to deploy on a Debian server (most of my additional libraries etc were compiled and built on a Debian machine). Mindful of all of the above, I would like some advice (and reason) as to which route to take. I would also like some advice on which backup software to use, from people who have walked a similar path.

  Read the article

• (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

  - by John B

  I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful.

  Read the article

• NetBackup's bplist doesn't get user/group info for Windows files

  - by Gnustavo

  I'm trying to get information about storage consumption from NetBackup's bplist output. I'm running NBU 6.0MP5 on a RHEL 3 server. The server is backing up several Solaris, Linux, and Windows machines. When I use bplist to get information about files backed up on any UNIX machine I get something like this: # bplist -C unixclient -R 99 -l -s 01/28/2006 -e 01/29/2006 / drwxr-xr-x test ccase 0 Nov 16 09:28 /l/home2/test/ -rw------- test ccase 4737 Jan 06 17:54 /l/home2/test/.bash_history -rw-rw-r-- test ccase 104 Nov 11 2004 /l/home2/test/.bashrc However, when I use it to list files backed up on any Windows client I can't get the user and group information. They both always appear as 'root'. Like this: # bplist -C winclient -t 13 -R 99 -l -s 02/20/2006 / drwx------ root root 0 Feb 20 14:26 /C/temp/ -rwx------ root root 41 Feb 20 14:26 /C/temp/asdf.txt drwx------ root root 0 May 25 2004 /C/temp/CTRMNGR/ Does anyone know why bplist doesn't show the correct user/group for Windows files? If it can't, is there a way to get that information using another command? Thanks. Gustavo.

  Read the article

• Cannot access shares via full domain name on Server 2008R2

  - by Stu

  Hi, I have a strange issue. We have a 2008R2 PDC and BDC. I can join the domain fine and everything seems "normal". However, on some of the other 2008R2 servers, I am unable to do things like a gpupdate. When I try, I get an error that the clocks are wrong (they aren't) and that I don't have permission. So far, this has only affected our 2008R2 servers -- the Win 7 clients are fine. The really strange things is if I browse to: \\mydomain.lan\sysvol - I get the error. But! if I browse to: \\MYDOMAIN\sysvol - it works fine. I can also access the \hostname.domain\sysvol remotely for each of the DC's and it's fine. So in short, it appears the permissions are fine since I can access them all individually on the same account. It also seems unlikely it's on the server as most clients can access it fine. The only drama I have is when I try to use the full domain name (which of course gpupdate does) on a 2008R2 server. Also, it's not just sysvol...netlogon has the same issues too on the affected machines. Any ideas? Thanks! Drew

  Read the article

• SNMP Access on Ubuntu

  - by javano

  I am trying to use SNMP to monitor a machine locally on its self and remotely. This is the snmpd.conf (Ubuntu 8.04.1): # sec.name source comunity com2sec readonly 1.2.3.4 nicenandtight com2sec readonly 5.6.7.8 reallysafe group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 view system included .iso.org.dod.internet.mgmt.mib-2.system access MyROGroup "" any noauth exact all none none syslocation my house syscontact me <[email protected]> exec .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro smuxpeer .1.3.6.1.4.1.674.10892.1 includeAllDisks 95% 1.2.3.4 is the local machines IP and everything is working locally. 5.6.7.8 is the remote machine and initially I am just trying to touch SNMPD with snmpwalk from the remote machine; snmpwalk -v 2c -c reallysafe 1.2.3.4 Timeout: No Response from 1.2.3.4 I have added to iptables as the very first rule; -A INPUT -p udp -m udp --dport 161 -j ACCEPT With such a loose iptables rule I can't see why I can't even touch the SNMPD on that Uubuntu Machine. There are more specific rules further down the table but as I couldn't connect I added the above. TCPDump shows the UDP packets coming in. What could be going wrong here?

  Read the article

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• What was SPX from the IPX/SPX stack ever used for?

  - by Kumba

  Been trying to learn about older networking protocols a bit, and figured that I would start with IPX/SPX. So I built two MS-DOS virtual machines in VirtualBox, and got IPX communications working (after much trial and error). The idea being to get several old DOS games to run, link up to a multiplayer match, interact with each game window, and capture the traffic using Wireshark from the host machine. From this, I got Quake, Masters of Orion 2, and MechWarrior 2 to communicate back and forth. Doom, Doom2, Duke3d, Warcraft, and several others either buggered up under the VM or just couldn't see the other VM on the IPX network. What did I discover? None of the working games used SPX. Not even Microsoft's NET DIAG used SPX. They all ran ONLY on top of IPX. I can't even find SPX examples or use-cases of SPX traffic running over IEEE 802.3 Ethernet II framing. I did find references that it was in abundant use on token ring, but that's it. Yet any IPX-aware application that I've hunted down so far usually advertises itself as "IPX/SPX", which seems to be a bit of a misnomer, since it doesn't seem to use SPX. So what was SPX used for? Any DOS applications out there that use it which will run under my VM setup? Edit: I am aware that IPX is to SPX as IP is to TCP (layer 3 to layer 4), so I expected to see an SPX layer underneath the IPX layer in Wireshark when I ran my tests.

  Read the article

• Why would one of my servers stop being able to access other servers by FQDN?

  - by Newlyn Erratt

  I have a number of servers on our local network and our debian server has suddenly stopped being able to access the other servers via their FQDN. Initial symptom was inability to login with Active Directory accounts. On further inspection, this machine, porkbelly, was unable to access our other servers (e.g. bacon and albert) via their FQDN. That is, they can ping albert by running ping albert but not by running ping albert.domain.local though when running ping albert it will be expanded to albert.domain.local. The server is still accessible from other servers via both porkbelly and porkbelly.domain.local. Upon examination of hosts information and running hostname its hostname and FQDN are correct. The resolv.conf appears correct. It contains: domain domain.local search domain.local nameserver 192.168.0.xxx (the nameserver) The dns server is also our Windows AD server. I'm not even sure where to go from here or why dns seems to be partially working though I don't have much experience. Where should I go from here? What might be causing this issue where machines are visible via their hostname but not their FQDN?

  Read the article

• BizTalk/MQ - DCOM was unable to communicate with the computer xxx using any of the configured protocols

  - by NealWalters

  I've read the other questions on this same error, but don't see a close match to this scenario. We got 18 of these last night between 12:17:13 and 12:39:37 on Win 2008/R2. It caused us to lose connectivity between BizTalk 2010 and WebSphere MQ machine. All our BizTalk machines (Prod, QA, Train, etc...) got the messages at the roughly same time and in the same quantity (about 18 of them). Computer xxx is the WebSphere MQ machine. What could cause this in the middle of the night? The servers are configured and running in Prod for a couple of years. There is no Win Firewall running, and servers are practically on the same rack. Could a run-away or 100% utilized CPU on the WebSphere MQ cause this issue? What else could cause it? BizTalk did NOT auto-recover from this situation. The above was followed by thousands of this message in the BizTalk event logs: The adapter "MQSeries" raised an error message. Details "Error encountered on Queue.Get Queue name = MyQManager/MyQueueName Reason code = 2354.". We restated BizTalk host instances, and it did not come back right away. It seemed we had to stop host instances for about two minutes, then start them.

  Read the article

• Data Store/Volume disconnecting. How to resume copy of VMDK?

  - by Serge

  I'm having an issue with my ESXi 4.1 hosts losing the datastore with FC SAN after a power outage. All 3 hosts disconnect so it's definitely a SAN issue. I've tried to resolve the issue on the SAN side with the SAN software support and Adaptec hardware support. No luck there. So I'm stuck with a SAN that will randomly disconnect the volume. I need to get the virtual machines (VMDK files) from the datastore. The problem is I can only get 5-20% before the data store disconnects. I have backups that are slightly older that I can use to replicate the VMDK differences to. What has not worked so far: Powering up the VMs, will boot up for 5-15 minutes then freeze vCenter migrate or clone of VM, will fail after similar period of time vCenter copy/paste of VMDK. Was able to get one 30GB VMDK and no luck after that. vMware Data Recovery. Fails at low %, can't resume, so next backup starts from begining. Veeam Backup & Recovery. Same as above, no resume function. If I can just find a backup solution that will resume from the failed spot that would solve my issue. Anyone have any ideas that I could try? EDIT 1 The SAN is Open-E DSS 6 running on a Supermicro 24 drive enclosure with 4 port Qlogic FC. Adaptec 52445 RAID card.

  Read the article

• Windows 7 can't see wireless printer

  - by Chance Robertson

  I have a P1102W printer from HP. I have a Windows 7 machine. I have a MacBook Pro. I setup the printer following the instructions from the Windows 7 machine. I am able to print from the Mac but not the Windows 7 machine. And to add, I am not able to print from any Windows 7 machines. The MacBook Pro address is 198.168.2.115, the Windows machine is 192.168.2.117, and the printer in 192.168.2.140. I can ping the printer from the Mac. I can ping the Windows 7 machine from the mac. I can ping the mac from the windows 7 machine. When I try to ping the printer from the Windows 7 machine I get destination unreachable. I can browse to the printer IP address from the mac and not the Windows 7. I have turned off the firewall on the Windows 7 machine and turned on network sharing. Is there something else I am missing. I can connect the printer with a USB cable to the Windows machine and print. I can not get the Windows machine to see the printer even though they are on the same network.

  Read the article

• What are problems and pitfalls with a public facing Active Directory

  - by Ralph Shillington

  The situation that i'm faced with is this: We plan on using a number of server applications hosted on Amazon EC2 machines, mainly Microsoft Team Foundation Server. These services rely heavily on Active Directory. Since our servers are in the Amazon cloud it should go without saying (but I will) that all our users are remote. It seems that we can't setup VPN on our EC2 instance -- so the users will have to join the domain, directly over the internet then they'll be able to authenticate and once authenticated, use that token for accessing resources such as TFS. on the DC instance, I can shut down all ports, except those needed for joining/authenicating to the domain. I can also filter the IP on that machine to just those address that we are expecting our users to be at (it's a small group) On the web based application servers, I imagine all we need to open is port 80 (or 8080 in the case of TFS) One of the problems that I'm faced with is what domain name to use for this Active directory. Should I go with "ourDomainName.com" or "OurDomainName.local" If I choose the latter, does that not mean that I'll have to get all our users to change their DNS address to point to our server, so it can resolve the domain name (I guess I could also distribute a host file) Perhaps there is another alternative that I'm completely missing.

  Read the article

• Can a folder on a NAS be made available as a physical drive in VMWare?

  - by asbjornu

  We are currently in the process of moving from a single web server to two load balanced web servers and are facing some challenges we don't quite know how to fix. One of these is that the current single server hosts applications that write stuff to disk. The applications running on the server expects that when something is written to disk it later will in fact exist, so it's important that this premise is fulfilled with the dual server architecture as well. The dual server setup is a couple of VMWare instances with Windows Server 2008 R2 as the guest operating system. Out of the box, these instances does not share any kind of file system, so just moving the applications over would make them break since one instance would write something to the file system that doesn't exist on the other. Thus we need to share a file system between the two virtual servers. Our host has proposed to create a network share on a SAN and map this share individually on each virtual machine. This doesn't work too well due to NTFS permissions, etc., because the share needs to be accessed by several independent web applications that won't even be in the same application pool. The only solution that kind of works is to hard code an "identity" for each web application into its web.config file, but this means password in clear text which doesn't sit well with me. Since the servers are virtual, I'm thinknig: Wouldn't it be possible to make a NAS area available as a physical disk in the gues operating system somehow? Since VMWare has full control of the virtual hardware, you'd think it would be able to "fake" a local hard drive in the virtual machine that in reality is a folder on a NAS, but so far I haven't found anything that states how and if this is possible. So I have to ask the wonderful Server Fault community: Can a folder on a NAS be made available as a physical drive (typical D:) in both of the virtual machines?

  Read the article

• big cpu load on vmware server / linux

  - by dezfafara

  Hi, I currently using a server 2.x hosting 4 virtual machines on a linux system Today, on my physical server, I saw an enormous load average: this is the "top" of the server, illustrating my 4 virtual guests. top - 11:02:02 up 194 days, 23:09, 5 users, load average: 18.78, 12.05, 13.55 Tasks: 113 total, 4 running, 109 sleeping, 0 stopped, 0 zombie Cpu0 : 71.6%us, 19.0%sy, 0.0%ni, 8.8%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st Cpu1 : 74.3%us, 10.4%sy, 0.0%ni, 15.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 72.5%us, 17.6%sy, 0.0%ni, 9.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 79.5%us, 4.6%sy, 0.0%ni, 16.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8178884k total, 8129980k used, 48904k free, 134904k buffers Swap: 10490436k total, 148k used, 10490288k free, 6129728k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7312 root 6 -10 1149m 921m 559m R 97 11.5 107947:09 vmware-vmx 6995 root 6 -10 779m 687m 317m R 92 8.6 107374:31 vmware-vmx 6693 root 6 -10 880m 659m 409m S 85 8.3 76947:33 vmware-vmx 12937 root 6 -10 960m 719m 523m S 75 9.0 67219:49 vmware-vmx In bold are the cpu usage for my 4 virtuals guests These guests are running on a linux system, and the appropriate process are usually 5% - 15% of cpu I don't understang why , since a few days I have this big problem. This is the "top" on a virtual guest which is at 95% of cpu load top - 11:23:15 up 194 days, 23:13, 4 users, load average: 0.25, 0.47, 0.59 Tasks: 92 total, 2 running, 90 sleeping, 0 stopped, 0 zombie Cpu(s): 1.4%us, 7.7%sy, 0.0%ni, 90.5%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 382296k total, 369732k used, 12564k free, 145156k buffers Swap: 979924k total, 13956k used, 965968k free, 86988k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3691 root 20 0 23948 1148 960 S 13.0 0.3 15339:23 vmware-guestd 3840 root 20 0 19880 584 512 S 7.7 0.2 1729:17 hald-addon-stor This virtual guest state is ok ... If anyone has any ideas .. Thanks

  Read the article

• VMware ESXi 4.1 snapshot of server 2008R2 machine generates 2 indentical snapshots

  - by Peter

  I have 2 VMs that are failing to get veeam backups, and it appears that the culprit is vmware snapshots. We are running Vsphere ESXi 4.1 build 320092, we have multiple server 2008R2 machines that take snapshots fine, but when with these two VMs when I take a snapshot I get 2 identical snapshots a few seconds apart. The snapshot manager only shows 1 snapshot, but there are 2 files 1 number off, that are identical sizes. There is only one disk on each VM, so that isn't the problem. Has anyone seen this behavior before and know how to fix it? Here are the files after a bad snapshot VM-XXX-000001-ctk.vmdk VM-XXX-000001-delta.vmdk VM-XXX-000001.vmdk VM-XXX-000002-ctk.vmdk VM-XXX-000002-delta.vmdk VM-XXX-000002.vmdk VM-XXX-2a659dbf.hlog VM-XXX-2a659dbf.vswp VM-XXX-Snapshot286.vmsn VM-XXX-aux.xml VM-XXX-ctk.vmdk VM-XXX-flat.vmdk VM-XXX-vss_manifests286.zip VM-XXX.nvram VM-XXX.vmdk VM-XXX.vmsd VM-XXX.vmx VM-XXX.vmxf vmware-20.log vmware-21.log vmware-22.log vmware-23.log vmware-24.log vmware-25.log vmware.log VM-XXX-000001.vmdk and VM-XXX-000002.vmdk are the exact same size.

  Read the article

• Running Visual Studio 2010 in a University Campus

  - by Woondows

  We have just installed Windows 7 Enterprise x64 in one of our computer labs being used by students for programming. However, when we installed Visual Studio 2010 Ultimate on the machines, we found that to even launch the application (devenv.exe), required the student to enter the administrator password (the usual UAC prompt). Of course, we could just turn off UAC, but that would defeat the purpose of having it in Windows 7. On the other hand, we cannot really give the students local administrator privilege, as we are concerned that they will do some malicious stuff on the computers. Previously when we used Windows XP Professional running Visual Studio 2005, we had no problems. Kindly advise if there's any workaround for this. EDIT: Thanks for the answer guys. Mayank, your links may work for Visual Studio .Net, but it doesn't seem to work for Visual Studio 2010. Ryan, Tieson, I'm intrigued that you guys managed to get it working easily. FYI I don't manage the Group Policies, but I can get them changed if necessary. Any particular GP that I should be looking at? Suggestions to how to troubleshoot further why UAC is being invoked? At least now I know for sure that this is not supposed to be the default behaviour for Visual Studio 2010 so I'm going to keep digging for a solution. Will try running Procmon and see if i can find something..

  Read the article

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

• WinHttpCertCfg not importing certificate

  - by Ramon Zarazua

  I need to setup a deployment script that imports an SSL certificate that my service uses. I have tried importing with WinHttpCertCfg and with CertMgr to no avail. Here are the command-line arguments I have tried to use with both: winhttpcertcfg.exe -i <certname>.pfx -c LOCAL_MACHINE\My -p <password> -a <user service runs as> and CertMgr.exe -add -all -s -r localMachine -c <cert name> My It seems from what I have investigated that CertMgr does not allow you to import certificates with a password, so I'd rather get winhttpcertcfg working. When I run them I get the following output: WinHttpCertCfg: Microsoft (R) WinHTTP Certificate Configuration Tool Copyright (C) Microsoft Corporation 2001. CertMgr: CertMgr Succeeded However, when I look into the local machine certificates in MMC, try to load them from my service, or list it out through winhttpcertcfg, or even looking at the registry in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SystemCertificates\MY\Certificates it is not found. I have tried all of the following: If I install the cert manually (Through CertMgr.msc dialogs) it works. The user installing is running as administrator The user installing has full access on the certificate The tools print out an error when something is wrong (wrong password) Tried it in multiple machines (All of them server 2008 R2) At this point I am officially out of ideas. Thank you.

  Read the article

• VirtualBox VM running web server not accessible via external IP

  - by mwigdahl

  I have a Windows 7 machine running VirtualBox with an Ubuntu guest. The guest has a Bitnami LAMP stack installed. I have the guest configured for Bridged networking, and I can access the guest web server just fine from other machines on my LAN using the guest's IP. I'm trying to configure port forwarding so that I can access the web server from outside my LAN. (The router is a 2WIRE model as I'm on ATT's UVerse). I've set up port forwarding for ports 80 and 443 to the guest's IP in a similar manner to how I had them set up for my previous, physical web server, which worked just fine. However, I cannot seem to access the new, virtual web server using my external IP on the forwarded port. I suspected Windows Firewall issues on the host, but disabling it didn't solve the issue. Anyone have advice on what I should try next? EDIT: I've now attempted disabling the firewall on the guest with sudo ufw disable -- that doesn't seem to help either. However, after checking the router's port forwarding in more detail I may see the problem. My VM is named "linux" and in the router's configuration pages it shows up inconsistently. Sometimes it reports with a valid LAN IP and other times it doesn't show up with any IP. Even when it shows the correct IP the router indicates that it is disconnected. Could this be an indication that the 2WIRE router doesn't play well with VirtualBox's bridged networking mode?

  Read the article

• Can't authorize a server for Amazon RDS

  - by Parris

  We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >