Search Results

Search found 5723 results on 229 pages for 'turing machines'.

Page 193/229 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• No network connection for vmware esxi guests

  - by JavaDev

  I'm new to VMware and setting up an Esxi server as a trial with the intention of possibly virtualizing some of our servers in the near future. I have setup ESXi on a Dell poweredge server, and installed a Centos 5.6 and Ubuntu 11.04 guest os on the server. However I cannot get networking on my guest OS's. The host is connected to a network with a DHCP server via a switch and is configured with a static IP. I have the default set-up for networking on the host: both guests are connected to the default vmnic1 adapter via the virtual switch vSwitch0. One thing though, the virtual adapter shows 'Observed IP ranges' to be XXX.XXX.XXX.194-XXX.XXX.XXX.195 (I've blanked out the initial prefixes) i.e just 1 address, even though the network the host is connected to has the usual 255.255.255.0 subnet mask. On the guest machines (using DHCP) by default, I can see an eth0 interface but with no connection or assigned IP address. A physical machine connected to the network gets a DHCP lease as expected. How do I get networking working on my guest OSes? Apologies for the long-winded question.

  Read the article

• How is the extra mSATA SSD disk used/configured in a Dell XPS laptop?

  - by Mark

  Some machines in the new XPS laptop range from Dell come with a regular, large (500GB+) HDD and an additional 32GB m-SATA SSD. The only detail I can find about this extra drive on the Dell site is this: Store your important files, multimedia and photos with XPS 15’s large hard drive options. To get instant access to your media, choose an optional mSATA solid-state drive (SSD) that can boot up to twice as fast as a regular hard drive and resumes in less than 1 second. I'd like to know more about how this extra drive is set up and used, specifically: Is anything installed on it (e.g. OS files or a boot loader) or is it just used as swap space? Is the m-SATA drive visible as a lettered drive in Windows? (I'd guess not if it's used for swap file only.) Is this unusual configuration likely to cause any problems later down the line - e.g. when upgrading to Windows 8? As usual, Dell's sales team haven't been able to help. If anyone's actually got a Dell machine with this or a similar hard drive set-up and can give a definitive answer rather than speculation I'll accept the answer.

  Read the article

• Sending same email through two different accounts on different domains using Outlook 2010

  - by bot

  I am a programmer and don't have experience in Outlook configurations. Our company has two email domains namely xyz.com and xyz.biz. Each employee has an email id on one of these domains but not both depending on the project they are working on. The problem we are facing is that when a communication email is sent from the Accounts, HR, Admin, etc departments, they need to send the email twice. Once through the xyz.com account to all employees with an email address on xyz.com and once through xyz.biz to all employees with an email address on xyz.biz. I am not sure why they have to send two separate emails but the IT team has directed all departments to do so as there is no other solution according to them. Even though two different groups have been created, sending an email to employees in a group of xyz.biz from xyz.com does not seem to work. I want to know if Outlook provides a feature such that we can configure some kind of rules to send an email through an id on xyz.com to all users on xyz.com and the same email gets sent automatically to users on xyz.biz through an id on xyz.biz. The only technical details I know is that we are using Exchange 2003 and the IT team claims that this is a limitation causing the problem. Edit: Our company is split into two main divisions depending on the type of projects. I am pretty sure I use domain XYZ wheras the employees in the other division use the doman ABC to log in into the windows machine or outlook itself. Also, employees in domain XYZ can access the machines on the network in domain ABC but not the other way around

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

• linux shutdown hang with wifi cifs mounts

  - by Sirex

  Since fedora 15 (and now with 16) it seems that wireless clients take a long while to shutdown when they have network filesystems mounted at shutdown time. I've pushed out a cifs mount via puppet, and all clients have it, including those on wireless. If say a laptop is on a wired connection it shuts down just fine, but if its on the wifi at the time (and no wired connection) it'll hang at the fedora f logo. I'm not sure if its indefinite or just a really long while, but ill give it a test when i shut this machine down in a second. Needless to say its pretty annoying, so is there a way of causing the machine to shutdown even if network connectivity has been lost at unmount time, -- or an official way to reorder events so the wireless card is kept up until after the unmount happens during the shut down process (short of writing a custom script for shutdowns which is a bit of a kludge) ? It does this on multiple machines, and all started doing it when we went from fedora 14 to 15. It was such an obvious issue i'd kind of assumed someone must have reported it or there was an easy fix, but i've not discovered anything yet. Additional info: I can confirm that manually unmounting the mounts then shutting down (sudo shutdown or the xfce shutdown button) will shutdown just fine, it only hangs if the mounts are still mounted The puppet config that sets the mount looks like this (now with the _netdev entry that is indeed pushed to clients successfully, but makes no difference): file { "/mnt/share": ensure = directory,} mount { "/mnt/share": atboot = true, ensure = mounted, remounts = false, fstype = cifs, device = "//srv/share", options = "user,gid=shareusers,uid=${user},file_mode=0700,dir_mode=0700,credentials=/root/.smbcreds,_netdev", require = [ File["/mnt/share"], Group["shareusers"] ], } }

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

  - by Jamie G

  I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

  Read the article

• Advice for UPC/Surge Protector in home office

  - by user37755

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• How can I monitor network traffic?

  - by WIndy Weather

  I have a home network with about 10 devices including BluRay player [netflix] and both windows and linux machines. I need to collect network traffic statistics so that if questions come up about how much traffic I'm using I have the answer independent of my ISP. I've looked at DD-WRT, but I see that even buying a new router that will be supported is a problem since I might get the wrong version of the hardware. I have a DIR-655 and a DIR-501 - neither of which is supported. I don't mind buying new hardware, but it looks like a crap-shoot to get one that will work. DD-WRT looks like a bad solution unless someone knows of a place to get a router that is guaranteed to work. Does someone know of an arduino or other SBC solution? I have plenty of NAT routers already, so I just need traffic statistics for external traffic. The network is GBit Ethernet inside and Cable / soon to be DSL outside. The DIR-655 only gives me "packets", not bytes transferred oddly enough. Thanks, ww

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• WSUS registry file: NoAutoRebootWithLoggedOnUsers entry being ignored

  - by the_pete

  We are using a registry entry to connect our internal workstations to our WSUS server and everything seems to be working except the NoAutoRebootWithLoggedOnUsers entry. Without fail, over the last few weeks, our lab setup as well as our users have been prompted to restart their machines with a 15 minute time out and there's nothing they can do about it. They can't postpone or cancel the restart, all options in the prompt are greyed out. Below is the registry file we are using to connect our workstations to our WSUS server: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "AcceptTrustedPublisherCerts"=dword:00000001 "ElevateNonAdmins"=dword:00000000 "WUServer"="http://xxx.xxx.xxx.xxx:8530" "WUStatusServer"="http://xxx.xxx.xxx.xxx:8530" [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU] "AUOptions"=dword:00000004 "AutoInstallMinorUpdates"=dword:00000001 "DetectionFrequencyEnabled"=dword:00000001 "DetectionFrequency"=dword:00000002 "NoAutoUpdate"=dword:00000000 "NoAutoRebootWithLoggedOnUsers"=dword:00000001 "RebootRelaunchTimeout"=dword:00000030 "RebootRelaunchTimeoutEnabled"=dword:00000001 "RescheduleWaitTime"=dword:00000020 "RescheduleWaitTimeEnabled"=dword:00000001 "ScheduledInstallDay"=dword:00000000 "ScheduledInstallTime"=dword:00000003 "UseWUServer"=dword:00000001 There is a bit of redundancy, if you want to call it that, having both the NoAutoRebootWithLoggedOnUsers entry as well as the entries for RebootRelaunchTimeout but we wanted to see if we could either disable the restart, or give our users a larger window within which they could wrap up their work, etc. before restarting. Neither of these entries seems to work, but our priority is getting NoAutoRebootWithLoggedOnUsers working and any help with this would be greatly appreciated.

  Read the article

• How do I configure IIS to allow access to network resources for PHP scripts?

  - by Dereleased

  I am currently working on a PHP front-end that joins together a series of applications running on separate servers; many of these applications generate files that I need access to, but these files (for various reasons) reside on their parent servers. If I, from the command line, issue a bit of script such as: <?php var_dump(glob("\\\\machine-name\\some\\share\\*")); I will get the full contents of that directory, proving that there's no problem programmatically with PHP reading the contents of a UNC share. However, if I try to execute the same script from the web server, I get an empty array -- more specifically, if I use more explicitly functions designed to "open" a directory like it was a file, I get access errors. I believe this to be a permissions issue, but I am not a server/network administrator type, so I'm not sure what I need to do to correct this and get my script running, and the links I've checked out have not been a terrible amount of help, perhaps due to my background, or lack thereof as far as IIS is concerned, coupled with the fact that we are not actually using .NET for this. Relevant Stats: Windows Server 2008 Standard SP2 IIS 7.0 PHP 5.2.9 I will be connecting to two types of servers: a few other nearly-identical Server 2008 machines, and a machine running embedded XP. Links that have not been particularly helpful but maybe I am just misreading: http://support.microsoft.com/?id=306158 http://support.microsoft.com/kb/207671/EN-US/ http://support.microsoft.com/kb/280383/

  Read the article

• LAN Webserver not accessible through PPTP VPN

  - by Joe

  I have this LAN Network with 10 clients and one server. The server has 4 virtual machines and a BIND DNS Server. When the router assigns an IP through the DHCP , it also gives the ip of the DNS Server, to resolve internal domains. Everything apparently works fine, the clients being able to access the server's vm's resources, but I also have to create the possibility of remote access. I installed the PPTP VPN on the server, and the vpn clients would get the same ip address range as the router's dhcp is assigning. Apparently everything is fine here also, except the fact that when we connect through the vpn , we cannot access the webserver on port 80 ( the webserver being one of the server's VM ). The iptables on the webserver has been turned off for testing purposes and the router's firewall is directing all the external traffic to the server. Can somebody suggest a solution to this? Extra details : VPN Server : PPTP Server Centos 6.3 x64 VPN Client : Windows 7 default PPTP VPN Connection The client is successfully connected to the server, everything works ( FTP/MYSQL/SSH/DNS ) , except the fact that when I try to access the webserver IP on the browser, it won't work.Pinging it works perfectly.

  Read the article

• Windows 2008 R2 DNS cant resolve own SOA

  - by user46742

  We have two Domain Controllers for our network. They both run DHCP, DNS, and ADS. They are both VM's sitting on MS Hyper V Server 2008 on separate physical hosts. We had our primary DC go down a week ago. I upgraded an already existing VM to Primary DC and built a new VM for the secondary. Both DNS servers are running and the SOA is configured correctly for Primary DC 1. However when I run the best practice analyzer it states the server cannot resolve it's own SOA. Check the configuration in the adapter. I checked and they are configured properly. I also went through the DNS entries thoroughly and made sure there was no records of the previous DC that went down. NSLOOKUP resolves the domain and primary dc fine. I also checked the firewalls on the machines and our physical firewall for any deny packets. Any suggestions? I appreciate any help!

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• Watchguard Firebox "split" fibre optic line into 2 interfaces

  - by fRAiLtY-

  We have a requirement on our Watchguard Firebox XTM505 to be able to split our incoming external interface, in this case a fibre optic dedicated leased line, 100/100. We use the line in our office of approx 30 machines however we also re-sell to an external company who utilise it to provide wireless internet solutions to the public. The current infrastructure is as follows: Data in (Leased Line) - Juniper SRX210 managed by ISP - 1 cable out into unmanaged Netgear switch - 1 cable into our firewall and office network, 1 cable to our external providers core router managed by them. We have been informed that having the unmanaged switch in the position it is poses a security risk and that a good option would be to get our Watchguard Firewall to perform the split, by separating our office onto a trusted interface, and by "passing through" the external line to their managed router. It is alleged that the Watchguard is capable of doing this and also rate limiting the interfaces, i.e. 20mbps for the trusted interface and 80mbps for the "pass-through", however Watchguard technical support don't seem to be able to understand what we're trying to achieve. Can anyone provide any advice on whether this is possible on a Watchguard device and how or perhaps if there's a better way of achieving this, perhaps with a managed switch instead of unmanaged? Cheers

  Read the article

• Server format & Reinstall while keeping Server & domain ID

  - by Chris

  Hi Everyone, I want to reinstall my 2008 R2 server from scratch, due to multiple Active Dir issues. I have only 1 server running AD and a spare machine to use if necessary. Is there a way to save just the user accounts and the domain SID, so that I can start with a clean server that uses the same name as before? I can reassign file security, but I do not want to have to rejoin all the users to a new domain. Also all users are mapped to folders on the server. What I hope to do is a clean install of the server without having to mess with the users machines. can someone please tell me the procedure to accomplish this? any help appreciated! Thanks guys, but I could be here all day telling you every error I am getting. can we please keep this to the question of how to do a reinstall and keep the same SID? I just want to start over without having to rejoin all the clients to a new domain. Is there such a tool that can backup the Server SID and the AD domain name so that I could restore them, without restoring any other data? I might not be using the correct terminology here, but hopefully you understand what I am asking. Thanks

  Read the article

• Server not resolving after restart

  - by DomainSoil

  I restarted our server today, and now cannot for the life of me get anything to resolve... I suspect it has something to do with our routes. I've tried numerous Google results to no avail. Here is as far as I've gotten: [root@www ~]# route -n Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.101 0.0.0.0 255.255.255.255 UH 0 0 0 eth1 0.0.0.0 192.168.1.101 0.0.0.0 UG 0 0 0 eth1 Things you need to know: Our server (CentOS 6.3) runs two virtual machines, one live, and one development. They mirror each other as much as possible, but I can't find where I've went wrong with the live server. The dev server works fine. [root@www ~]# ifconfig eth1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet6 addr: xxxx:xxx:xxxx:xxxx:xxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118206 errors:0 dropped:0 overruns:0 frame:0 TX packets:165 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7825749 (7.4 Mib) TX bytes:7146 (69.2 KiB) Interrupt:28 [root@www ~]# /etc/init.d/network status Configured devices: lo Auto eth0 Currently active devices: lo eth1 If there is any other information you need, please don't hesitate to ask!

  Read the article

• VirtualBox with Ubuntu Server guest can't ping outside

  - by Danidan

  Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

  Read the article

• Configuring SQL Server Express 2005

  - by MrTognio

  What's the proper way to configure SQL Server Express 2005 so that it can allow for a number of clients to get connected to the server? I have my application running both in the server machine and the client machines. Given the nature of my application, clients are the branches geographically distant from each other, and the server itself. Every operation the client records must be reported to the server, because the server needs total control over the usage and production. But, what should I consider when configuring the connection in both sides, the server and the client? I'm not as used to SQL Server, I'm a beginner, however through SQL Server Configuration Manager I have set the main options without success. The problem seems to be related to trusted connections even though I have set it to support both windows and SQL Server authentication. When the client tries to connect to the server using windows authentication it displays no table; when it tries to communicate using a password (SQL Server authentication), tables are successfully displayed but no access is allowed... Thanx in advance!

  Read the article

• How to setup bindings for development IIS 7.5 with lot of sites

  - by Antonio Bakula

  I am a programmer in a small ASP.NET shop with very little expirience in server administration, and I have to setup IIS 7.5 to host lot of sites on newly installed windows server 2008 R2, these sites are test "clones" for sites on "real" web server and they should be accessible only in local network (domain). Developers should add new sites for our new customers. Project managers use this server to check progress and test new sites and new features, QA people have to have access to this site and test before we copy it to the "real" web server. Developers only have access to IIS console, in fact they can use RDP to test server with their developer domain credentials and permissions, also developers are local admins on that machine (tester). On our previous server I used different port numbers for each site. That worked but don't like this solution, I would prefer to use subdomains. But here are the problems: manually adding DNS records is not an option because we do not wont that developers have to administer domain DNS server, and currently this had to be done with domain administrator credentials. Is there a some way to add DNS record automatically ? I tried to add DNS record for subdomains on test server with wildcard (*.tester) and that seems to work for some time but that change coused some bad problems in our domain network and admin forbid me to mess with DNS, he said that I have to add DNS record for every subdomain manually and that I can not use wildcards, and there is nothing that I can do about it, mainly for "politicall" reasons :( obviously our admin is pretty much uncooperative, outsorced from different organization and I can't do anything about that. can I add another DNS server on that machine ? What must be setup on clients machines to "tell" them to use domain DNS server and tester domain server ? So please I need someone to give me some advice, what should I do ? Is different port numbers only option left ? Thanks !

  Read the article

• Reverse SSH tunnel: how can I send my port number to the server?

  - by Tom

  I have two machines, Client and Server. Client (who is behind a corporate firewall) opens a reverse SSH tunnel to Server, which has a publicly-accessible IP address, using this command: ssh -nNT -R0:localhost:2222 [email protected] In OpenSSH 5.3+, the 0 occurring just after the -R means "pick an available port" rather than explicitly calling for one. The reason I'm doing this is because I don't want to pick a port that's already in use. In truth, there are actually many Clients out there that need to set up similar tunnels. The problem at this point is that the server does not know which Client is which. If we want to connect back to one of these Clients (via localhost) then how do we know which port refers to which client? I'm aware that ssh reports the port number to the command line when used in the above manner. However, I'd also like to use autossh to keep the sessions alive. autossh runs its child process via fork/exec, presumably, so that the output of the actual ssh command is lost in the ether. Furthermore, I can't think of any other way to get the remote port from Client. Thus, I'm wondering if there is a way to determine this port on Server. One idea I have is to somehow use /etc/sshrc, which is supposedly a script that runs for every connection. However, I don't know how one would get the pertinent information here (perhaps the PID of the particular sshd process handling that connection?) I'd love some pointers. Thanks!

  Read the article

• printer assignments for windows xp workstations within an active directory environment

  - by another_netadmin

  I'm using the following script to handle removing any old networked printers from machines and then assigning the propper ones and making one of them the default. This script is assigned to the OU the workstations reside in and uses group policy loopback so all users that login will get the appropriate printers mapped for them. I tried to use the new Printer Manager as part of W2K3 R2 but when assigning the default this way I get an error that the printer doesn't exist so I'm back to using the script. One flaw that I'm noticing is that it won't remove any printers that happen to be mapped from an RDP session (we don't see this everywhere but there are a few locations). Is there any way to enumerate all RDP printers and remove them similar to how I'm enumerating and removing networked printers? ' ' Printers.vbs - Windows Logon Script. ' RemovePrinters AddPrinters Sub RemovePrinters() On Error Resume Next Dim strPrinter Set objNetwork = WScript.CreateObject("WScript.Network") Set colPrinters = objNetwork.EnumPrinterConnections For i = 0 to colPrinters.Count -1 Step 2 strPrinter=CStr(colPrinters.Item(i+1)) If Not InStr(strPrinter,"\\") = 0 Then objNetwork.RemovePrinterConnection strPrinter, True, True End If Next End Sub Sub AddPrinters() On Error GoTo 0 Set objNetwork = CreateObject("WScript.Network") objNetwork.AddWindowsPrinterConnection "\\printers1\JH120-DELL5310" objNetwork.SetDefaultPrinter "\\printers1\Jh120-DELL5310" End Sub

  Read the article

• Problems setting up VLC Sever/client streaming

  - by Ayos

  I'm trying to set up a Linux machine as the server and a Windows XP machine as the client. Both machines are connected to the same local network via a Wi-Fi router. I setup the stream with the following properties : http stream port 8080 play locally And not much else. No firewall on the windows client(Windows firewall is disabled) When I try to open network stream via the client machine(Using VLC or Windows Media Player) I get the following errors: Media Player error code : 0xC00D11B3: Encountered a network Problem. VLC Console: main warning: connection timed out access_mms error: cannot connect to 192.168.1.3:8080 main debug: no access module matching "http" could be loaded main debug: TIMER module_need() : 12625.810 ms - Total 12625.810 ms / 1 intvls (Avg 12625.809 ms) main error: open of `http://192.168.1.3:8080' failed main debug: dead input main debug: repeating item main debug: starting playback of the new playlist item main debug: resyncing on http://192.168.1.3:8080 main debug: http://192.168.1.3:8080 is at 0 main debug: creating new input thread main debug: Creating an input for 'http://192.168.1.3:8080' main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\Accer\LOCALS~1\Temp' main debug: `http://192.168.1.3:8080' gives access `http' demux `' path `192.168.1.3:8080' main debug: creating demux: access='http' demux='' location='192.168.1.3:8080' file='\\192.168.1.3:8080' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "http" main debug: TIMER module_need() : 0.461 ms - Total 0.461 ms / 1 intvls (Avg 0.461 ms) main debug: creating access 'http' location='192.168.1.3:8080', path='\\192.168.1.3:8080' main debug: looking for access module: 2 candidates access_http debug: http: server='192.168.1.3' port=8080 file='' main debug: net: connecting to 192.168.1.3 port 8080 qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'http://192.168.1.3:8080' : 13397.979 ms - Total 13397.979 ms / 1 intvls (Avg 13397.978 ms) qt4 debug: IM: Setting an input Need Help. Thanks in advance.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >